diff options
| author | Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> | 2019-05-23 16:11:12 -0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-07-26 09:12:45 +0200 |
| commit | 53b3ba901e35ff14ffeac902cb1b9ec31958667b (patch) | |
| tree | cbf61b9a13cf0000b7d3934c92f50154d3cf68d7 | |
| parent | e00660b6e50510f6490b33ac8120799624e738db (diff) | |
| download | linux-stable-53b3ba901e35ff14ffeac902cb1b9ec31958667b.tar.gz linux-stable-53b3ba901e35ff14ffeac902cb1b9ec31958667b.tar.bz2 linux-stable-53b3ba901e35ff14ffeac902cb1b9ec31958667b.zip | |
ixgbe: Check DDM existence in transceiver before access
[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 |
2 files changed, 3 insertions, 1 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index acba067cc15a..7c52ae8ac005 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -3226,7 +3226,8 @@ static int ixgbe_get_module_info(struct net_device *dev, page_swap = true; } - if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) { + if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap || + !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) { /* We have a SFP, but it does not support SFF-8472 */ modinfo->type = ETH_MODULE_SFF_8079; modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 214b01085718..6544c4539c0d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -45,6 +45,7 @@ #define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 #define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 #define IXGBE_SFF_ADDRESSING_MODE 0x4 +#define IXGBE_SFF_DDM_IMPLEMENTED 0x40 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8 #define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23 |