diff options
| author | Konrad Dybcio <konrad.dybcio@linaro.org> | 2022-11-14 11:50:42 +0100 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2022-12-06 11:05:29 -0600 |
| commit | 6f196ab2ad1e2b56c67cc247293ac2c5b73dbe90 (patch) | |
| tree | 230599fba1a5af1b3bc92cdddd1b67eee6ff3c18 | |
| parent | b0dfe3c9d63222367539a87296c8ebe11020dff9 (diff) | |
| download | linux-stable-6f196ab2ad1e2b56c67cc247293ac2c5b73dbe90.tar.gz linux-stable-6f196ab2ad1e2b56c67cc247293ac2c5b73dbe90.tar.bz2 linux-stable-6f196ab2ad1e2b56c67cc247293ac2c5b73dbe90.zip | |
arm64: dts: qcom: sm6375: Add SDHCI2
Configure the second SDHCI bus controller, which usually the
interface used for SD cards.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114105043.36698-3-konrad.dybcio@linaro.org
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm6375.dtsi | 82 |
1 files changed, 82 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 6adffd927a8e..08587c8681b2 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -540,6 +540,46 @@ #interrupt-cells = <2>; #gpio-cells = <2>; + sdc2_off_state: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + qup_i2c0_default: qup-i2c0-default-state { pins = "gpio0", "gpio1"; function = "qup00"; @@ -630,6 +670,48 @@ reg = <0 0x045f0000 0 0x7000>; }; + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x04784000 0 0x1000>; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + iommus = <&apps_smmu 0x40 0x0>; + + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; + pinctrl-names = "default", "sleep"; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + gpi_dma0: dma-controller@4a00000 { compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x04a00000 0 0x60000>; |