usb: musb: make all glue layer export struct musb_platform_ops

preparing to a big refactor on musb code. We need
to be able to compile in all glue layers (or at
least all ARM-based ones) together and have a
working binary.

While preparing for that, we move every glue
layer to export only one symbol, which is
a struct musb_platform_ops, and make all
other functions static.

Later patches will come to allow for compiling
all glue layers together and have a working
binary.

Signed-off-by: Felipe Balbi <balbi@ti.com>

9 files changed, 335 insertions, 177 deletions

diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index b0aabf3a606f..be17610d7fc2 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -122,9 +122,9 @@ static inline void phy_off(void)
 }
 
 /*
- * musb_platform_enable - enable interrupts
+ * am35x_musb_enable - enable interrupts
  */
-void musb_platform_enable(struct musb *musb)
+static void am35x_musb_enable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 epmask;
@@ -143,9 +143,9 @@ void musb_platform_enable(struct musb *musb)
 }
 
 /*
- * musb_platform_disable - disable HDRC and flush interrupts
+ * am35x_musb_disable - disable HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void am35x_musb_disable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 
@@ -162,7 +162,7 @@ void musb_platform_disable(struct musb *musb)
 #define portstate(stmt)
 #endif
 
-static void am35x_set_vbus(struct musb *musb, int is_on)
+static void am35x_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
 }
@@ -221,7 +221,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	static unsigned long last_timer;
 
@@ -251,7 +251,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&otg_workaround, timeout);
 }
 
-static irqreturn_t am35x_interrupt(int irq, void *hci)
+static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 {
 	struct musb  *musb = hci;
 	void __iomem *reg_base = musb->ctrl_base;
@@ -362,7 +362,7 @@ eoi:
 	return ret;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int am35x_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 
@@ -391,7 +391,7 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int am35x_musb_init(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev, lvl_intr, sw_reset;
@@ -427,7 +427,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
-	musb->board_set_vbus = am35x_set_vbus;
+	musb->board_set_vbus = am35x_musb_set_vbus;
 
 	/* Global reset */
 	sw_reset = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
@@ -446,7 +446,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 
 	msleep(5);
 
-	musb->isr = am35x_interrupt;
+	musb->isr = am35x_musb_interrupt;
 
 	/* clear level interrupt */
 	lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
@@ -461,7 +461,7 @@ exit0:
 	return status;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int am35x_musb_exit(struct musb *musb)
 {
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
@@ -522,3 +522,16 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 		memcpy(dst, &val, len);
 	}
 }
+
+const struct musb_platform_ops musb_ops = {
+	.init		= am35x_musb_init,
+	.exit		= am35x_musb_exit,
+
+	.enable		= am35x_musb_enable,
+	.disable	= am35x_musb_disable,
+
+	.set_mode	= am35x_musb_set_mode,
+	.try_idle	= am35x_musb_try_idle,
+
+	.set_vbus	= am35x_musb_set_vbus,
+};
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index e8cbcc59c419..9874501d6429 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -277,7 +277,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 	DBG(4, "state is %s\n", otg_state_string(musb));
 }
 
-void musb_platform_enable(struct musb *musb)
+static void bfin_musb_enable(struct musb *musb)
 {
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
@@ -285,11 +285,11 @@ void musb_platform_enable(struct musb *musb)
 	}
 }
 
-void musb_platform_disable(struct musb *musb)
+static void bfin_musb_disable(struct musb *musb)
 {
 }
 
-static void bfin_set_vbus(struct musb *musb, int is_on)
+static void bfin_musb_set_vbus(struct musb *musb, int is_on)
 {
 	int value = musb->config->gpio_vrsel_active;
 	if (!is_on)
@@ -302,51 +302,29 @@ static void bfin_set_vbus(struct musb *musb, int is_on)
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
+static int bfin_musb_set_power(struct otg_transceiver *x, unsigned mA)
 {
 	return 0;
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	if (!is_otg_enabled(musb) && is_host_enabled(musb))
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 }
 
-int musb_platform_get_vbus_status(struct musb *musb)
+static int bfin_musb_get_vbus_status(struct musb *musb)
 {
 	return 0;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb)
+static void bfin_musb_reg_init(struct musb *musb)
 {
-
-	/*
-	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
-	 * and OTG HOST modes, while rev 1.1 and greater require PE7 to
-	 * be low for DEVICE mode and high for HOST mode. We set it high
-	 * here because we are in host mode
-	 */
-
-	if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
-		printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n",
-			musb->config->gpio_vrsel);
-		return -ENODEV;
-	}
-	gpio_direction_output(musb->config->gpio_vrsel, 0);
-
-	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
-	if (!musb->xceiv) {
-		gpio_free(musb->config->gpio_vrsel);
-		return -ENODEV;
-	}
-
 	if (ANOMALY_05000346) {
 		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
 		SSYNC();
@@ -380,21 +358,69 @@ int __init musb_platform_init(struct musb *musb)
 				EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
 				EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
 	SSYNC();
+}
+
+static int bfin_musb_init(struct musb *musb)
+{
+
+	/*
+	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
+	 * and OTG HOST modes, while rev 1.1 and greater require PE7 to
+	 * be low for DEVICE mode and high for HOST mode. We set it high
+	 * here because we are in host mode
+	 */
+
+	if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
+		printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
+			musb->config->gpio_vrsel);
+		return -ENODEV;
+	}
+	gpio_direction_output(musb->config->gpio_vrsel, 0);
+
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		gpio_free(musb->config->gpio_vrsel);
+		return -ENODEV;
+	}
+
+	bfin_musb_reg_init(musb);
 
 	if (is_host_enabled(musb)) {
-		musb->board_set_vbus = bfin_set_vbus;
+		musb->board_set_vbus = bfin_musb_set_vbus;
 		setup_timer(&musb_conn_timer,
 			musb_conn_timer_handler, (unsigned long) musb);
 	}
 	if (is_peripheral_enabled(musb))
-		musb->xceiv->set_power = bfin_set_power;
+		musb->xceiv->set_power = bfin_musb_set_power;
 
 	musb->isr = blackfin_interrupt;
 
 	return 0;
 }
 
-int musb_platform_exit(struct musb *musb)
+#ifdef CONFIG_PM
+void musb_platform_save_context(struct musb *musb,
+			struct musb_context_registers *musb_context)
+{
+	if (is_host_active(musb))
+		/*
+		 * During hibernate gpio_vrsel will change from high to low
+		 * low which will generate wakeup event resume the system
+		 * immediately.  Set it to 0 before hibernate to avoid this
+		 * wakeup event.
+		 */
+		gpio_set_value(musb->config->gpio_vrsel, 0);
+}
+
+void musb_platform_restore_context(struct musb *musb,
+			struct musb_context_registers *musb_context)
+{
+	bfin_musb_reg_init(musb);
+}
+#endif
+
+static int bfin_musb_exit(struct musb *musb)
 {
 	gpio_free(musb->config->gpio_vrsel);
 
@@ -402,3 +428,17 @@ int musb_platform_exit(struct musb *musb)
 	usb_nop_xceiv_unregister();
 	return 0;
 }
+
+const struct musb_platform_ops musb_ops = {
+	.init		= bfin_musb_init,
+	.exit		= bfin_musb_exit,
+
+	.enable		= bfin_musb_enable,
+	.disable	= bfin_musb_disable,
+
+	.set_mode	= bfin_musb_set_mode,
+	.try_idle	= bfin_musb_try_idle,
+
+	.vbus_status	= bfin_musb_vbus_status,
+	.set_vbus	= bfin_musb_set_vbus,
+};
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 84427bebbf62..6161fc50d049 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -131,9 +131,9 @@ static inline void phy_off(void)
  */
 
 /**
- * musb_platform_enable - enable interrupts
+ * da8xx_musb_enable - enable interrupts
  */
-void musb_platform_enable(struct musb *musb)
+static void da8xx_musb_enable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 mask;
@@ -151,9 +151,9 @@ void musb_platform_enable(struct musb *musb)
 }
 
 /**
- * musb_platform_disable - disable HDRC and flush interrupts
+ * da8xx_musb_disable - disable HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void da8xx_musb_disable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 
@@ -170,7 +170,7 @@ void musb_platform_disable(struct musb *musb)
 #define portstate(stmt)
 #endif
 
-static void da8xx_set_vbus(struct musb *musb, int is_on)
+static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
 }
@@ -252,7 +252,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	static unsigned long last_timer;
 
@@ -282,7 +282,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&otg_workaround, timeout);
 }
 
-static irqreturn_t da8xx_interrupt(int irq, void *hci)
+static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 {
 	struct musb		*musb = hci;
 	void __iomem		*reg_base = musb->ctrl_base;
@@ -380,7 +380,7 @@ static irqreturn_t da8xx_interrupt(int irq, void *hci)
 	return ret;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u32 cfgchip2 = __raw_readl(CFGCHIP2);
 
@@ -409,7 +409,7 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int da8xx_musb_init(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev;
@@ -431,7 +431,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
 
-	musb->board_set_vbus = da8xx_set_vbus;
+	musb->board_set_vbus = da8xx_musb_set_vbus;
 
 	/* Reset the controller */
 	musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
@@ -446,14 +446,14 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		 rev, __raw_readl(CFGCHIP2),
 		 musb_readb(reg_base, DA8XX_USB_CTRL_REG));
 
-	musb->isr = da8xx_interrupt;
+	musb->isr = da8xx_musb_interrupt;
 	return 0;
 fail:
 	clk_disable(musb->clock);
 	return -ENODEV;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int da8xx_musb_exit(struct musb *musb)
 {
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
@@ -467,3 +467,16 @@ int musb_platform_exit(struct musb *musb)
 
 	return 0;
 }
+
+const struct musb_platform_ops musb_ops = {
+	.init		= da8xx_musb_init,
+	.exit		= da8xx_musb_exit,
+
+	.enable		= da8xx_musb_enable,
+	.disable	= da8xx_musb_disable,
+
+	.set_mode	= da8xx_musb_set_mode,
+	.try_idle	= da8xx_musb_try_idle,
+
+	.set_vbus	= da8xx_musb_set_vbus,
+};
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 051e2bf1897a..e283b5af8de0 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -83,7 +83,7 @@ static inline void phy_off(void)
 
 static int dma_off = 1;
 
-void musb_platform_enable(struct musb *musb)
+static void davinci_musb_enable(struct musb *musb)
 {
 	u32	tmp, old, val;
 
@@ -116,7 +116,7 @@ void musb_platform_enable(struct musb *musb)
 /*
  * Disable the HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void davinci_musb_disable(struct musb *musb)
 {
 	/* because we don't set CTRLR.UINT, "important" to:
 	 *  - not read/write INTRUSB/INTRUSBE
@@ -167,7 +167,7 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
 
 #endif	/* EVM */
 
-static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate)
 {
 #ifdef CONFIG_MACH_DAVINCI_EVM
 	if (is_on)
@@ -190,10 +190,10 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
 #endif
 }
 
-static void davinci_set_vbus(struct musb *musb, int is_on)
+static void davinci_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
-	davinci_source_power(musb, is_on, 0);
+	davinci_musb_source_power(musb, is_on, 0);
 }
 
 
@@ -259,7 +259,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-static irqreturn_t davinci_interrupt(int irq, void *__hci)
+static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
 {
 	unsigned long	flags;
 	irqreturn_t	retval = IRQ_NONE;
@@ -345,7 +345,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 		/* NOTE:  this must complete poweron within 100 msec
 		 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
 		 */
-		davinci_source_power(musb, drvvbus, 0);
+		davinci_musb_source_power(musb, drvvbus, 0);
 		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
 				otg_state_string(musb),
@@ -370,13 +370,13 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 	return retval;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 mode)
+static int davinci_musb_set_mode(struct musb *musb, u8 mode)
 {
 	/* EVM can't do this (right?) */
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb)
+static int davinci_musb_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
@@ -398,8 +398,8 @@ int __init musb_platform_init(struct musb *musb)
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
-	musb->board_set_vbus = davinci_set_vbus;
-	davinci_source_power(musb, 0, 1);
+	musb->board_set_vbus = davinci_musb_set_vbus;
+	davinci_musb_source_power(musb, 0, 1);
 
 	/* dm355 EVM swaps D+/D- for signal integrity, and
 	 * is clocked from the main 24 MHz crystal.
@@ -440,7 +440,7 @@ int __init musb_platform_init(struct musb *musb)
 		revision, __raw_readl(USB_PHY_CTRL),
 		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
 
-	musb->isr = davinci_interrupt;
+	musb->isr = davinci_musb_interrupt;
 	return 0;
 
 fail:
@@ -451,7 +451,7 @@ fail:
 	return -ENODEV;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int davinci_musb_exit(struct musb *musb)
 {
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
@@ -465,7 +465,7 @@ int musb_platform_exit(struct musb *musb)
 		__raw_writel(deepsleep, DM355_DEEPSLEEP);
 	}
 
-	davinci_source_power(musb, 0 /*off*/, 1);
+	davinci_musb_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */
 	if (is_host_enabled(musb) && musb->xceiv->default_a) {
@@ -502,3 +502,15 @@ int musb_platform_exit(struct musb *musb)
 
 	return 0;
 }
+
+const struct musb_platform_ops musb_ops = {
+	.init		= davinci_musb_init,
+	.exit		= davinci_musb_exit,
+
+	.enable		= davinci_musb_enable,
+	.disable	= davinci_musb_disable,
+
+	.set_mode	= davinci_musb_set_mode,
+
+	.set_vbus	= davinci_musb_set_vbus,
+};
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index a5ceddfe57d6..516c68c6fa50 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -390,7 +390,7 @@ void musb_otg_timer_func(unsigned long data)
 	case OTG_STATE_A_SUSPEND:
 	case OTG_STATE_A_WAIT_BCON:
 		DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
-		musb_set_vbus(musb, 0);
+		musb_platform_set_vbus(musb, 0);
 		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	default:
@@ -570,7 +570,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		musb->ep0_stage = MUSB_EP0_START;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
-		musb_set_vbus(musb, 1);
+		musb_platform_set_vbus(musb, 1);
 
 		handled = IRQ_HANDLED;
 	}
@@ -641,7 +641,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		/* go through A_WAIT_VFALL then start a new session */
 		if (!ignore)
-			musb_set_vbus(musb, 0);
+			musb_platform_set_vbus(musb, 0);
 		handled = IRQ_HANDLED;
 	}
 
@@ -1898,6 +1898,8 @@ allocate_instance(struct device *dev,
 	}
 
 	musb->controller = dev;
+	musb->ops = &musb_ops;
+
 	return musb;
 }
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 59928a235dc5..68fc76f5e316 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -281,6 +281,8 @@ struct musb_platform_ops {
 	void	(*set_vbus)(struct musb *musb, int on);
 };
 
+extern const struct musb_platform_ops musb_ops;
+
 /*
  * struct musb_hw_ep - endpoint hardware (bidirectional)
  *
@@ -359,6 +361,9 @@ struct musb {
 	spinlock_t		lock;
 	struct clk		*clock;
 	struct clk		*phy_clock;
+
+	const struct musb_platform_ops *ops;
+
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
 	u16			hwvers;
@@ -486,52 +491,6 @@ struct musb {
 #endif
 };
 
-#ifdef CONFIG_PM
-struct musb_csr_regs {
-	/* FIFO registers */
-	u16 txmaxp, txcsr, rxmaxp, rxcsr;
-	u16 rxfifoadd, txfifoadd;
-	u8 txtype, txinterval, rxtype, rxinterval;
-	u8 rxfifosz, txfifosz;
-	u8 txfunaddr, txhubaddr, txhubport;
-	u8 rxfunaddr, rxhubaddr, rxhubport;
-};
-
-struct musb_context_registers {
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
-	u32 otg_sysconfig, otg_forcestandby;
-#endif
-	u8 power;
-	u16 intrtxe, intrrxe;
-	u8 intrusbe;
-	u16 frame;
-	u8 index, testmode;
-
-	u8 devctl, busctl, misc;
-
-	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
-};
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_save_context(struct musb *musb,
-		struct musb_context_registers *musb_context);
-extern void musb_platform_restore_context(struct musb *musb,
-		struct musb_context_registers *musb_context);
-#else
-#define musb_platform_save_context(m, x)	do {} while (0)
-#define musb_platform_restore_context(m, x)	do {} while (0)
-#endif
-
-#endif
-
-static inline void musb_set_vbus(struct musb *musb, int is_on)
-{
-	musb->board_set_vbus(musb, is_on);
-}
-
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 static inline struct musb *gadget_to_musb(struct usb_gadget *g)
 {
@@ -620,29 +579,120 @@ extern void musb_load_testpacket(struct musb *);
 
 extern irqreturn_t musb_interrupt(struct musb *);
 
-extern void musb_platform_enable(struct musb *musb);
-extern void musb_platform_disable(struct musb *musb);
-
 extern void musb_hnp_stop(struct musb *musb);
 
-extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+#ifdef CONFIG_PM
+struct musb_csr_regs {
+	/* FIFO registers */
+	u16 txmaxp, txcsr, rxmaxp, rxcsr;
+	u16 rxfifoadd, txfifoadd;
+	u8 txtype, txinterval, rxtype, rxinterval;
+	u8 rxfifosz, txfifosz;
+	u8 txfunaddr, txhubaddr, txhubport;
+	u8 rxfunaddr, rxhubaddr, rxhubport;
+};
 
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
-	defined(CONFIG_ARCH_DAVINCI_DA8XX) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-	defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
-#else
-#define musb_platform_try_idle(x, y)		do {} while (0)
+struct musb_context_registers {
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4)
+	u32 otg_sysconfig, otg_forcestandby;
 #endif
+	u8 power;
+	u16 intrtxe, intrrxe;
+	u8 intrusbe;
+	u16 frame;
+	u8 index, testmode;
 
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN)
-extern int musb_platform_get_vbus_status(struct musb *musb);
+	u8 devctl, busctl, misc;
+
+	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN)
+extern void musb_platform_save_context(struct musb *musb,
+		struct musb_context_registers *musb_context);
+extern void musb_platform_restore_context(struct musb *musb,
+		struct musb_context_registers *musb_context);
 #else
-#define musb_platform_get_vbus_status(x)	0
+#define musb_platform_save_context(m, x)	do {} while (0)
+#define musb_platform_restore_context(m, x)	do {} while (0)
 #endif
 
-extern int __init musb_platform_init(struct musb *musb);
-extern int musb_platform_exit(struct musb *musb);
+#endif
+
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+	if (musb->ops->set_vbus)
+		musb->ops->set_vbus(musb, is_on);
+}
+
+static inline void musb_platform_enable(struct musb *musb)
+{
+	if (musb->ops->enable)
+		musb->ops->enable(musb);
+}
+
+static inline void musb_platform_disable(struct musb *musb)
+{
+	if (musb->ops->disable)
+		musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+	if (!musb->ops->set_mode)
+		return 0;
+
+	return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+		unsigned long timeout)
+{
+	if (musb->ops->try_idle)
+		musb->ops->try_idle(musb, timeout);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+	if (!musb->ops->vbus_status)
+		return 0;
+
+	return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+	if (!musb->ops->init)
+		return -EINVAL;
+
+	return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+	if (!musb->ops->exit)
+		return -EINVAL;
+
+	return musb->ops->exit(musb);
+}
+
+static inline int musb_platform_suspend(struct musb *musb)
+{
+	if (!musb->ops->suspend)
+		return 0;
+
+	return musb->ops->suspend(musb);
+}
+
+static inline int musb_platform_resume(struct musb *musb)
+{
+	if (!musb->ops->resume)
+		return 0;
+
+	return musb->ops->resume(musb);
+}
 
 #endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 43233c397b6e..b46d1877e28e 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -276,7 +276,7 @@ int musb_hub_control(
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
-				musb_set_vbus(musb, 0);
+				musb_platform_set_vbus(musb, 0);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
 		case USB_PORT_FEAT_C_ENABLE:
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 27dabcf0a868..5f0d0f105989 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -35,7 +35,6 @@
 #include "musb_core.h"
 #include "omap2430.h"
 
-
 static struct timer_list musb_idle_timer;
 
 static void musb_do_idle(unsigned long _musb)
@@ -98,7 +97,7 @@ static void musb_do_idle(unsigned long _musb)
 }
 
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
 	static unsigned long	last_timer;
@@ -131,13 +130,15 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&musb_idle_timer, timeout);
 }
 
-void musb_platform_enable(struct musb *musb)
+static void omap2430_musb_enable(struct musb *musb)
 {
 }
-void musb_platform_disable(struct musb *musb)
+
+static void omap2430_musb_disable(struct musb *musb)
 {
 }
-static void omap_set_vbus(struct musb *musb, int is_on)
+
+static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 {
 	u8		devctl;
 	/* HDRC controls CPEN, but beware current surges during device
@@ -175,9 +176,9 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int musb_platform_resume(struct musb *musb);
+static int omap2430_musb_resume(struct musb *musb);
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
@@ -187,7 +188,7 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb)
+static int omap2430_musb_init(struct musb *musb)
 {
 	u32 l;
 	struct device *dev = musb->controller;
@@ -204,7 +205,7 @@ int __init musb_platform_init(struct musb *musb)
 		return -ENODEV;
 	}
 
-	musb_platform_resume(musb);
+	omap2430_musb_resume(musb);
 
 	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 	l &= ~ENABLEWAKEUP;	/* disable wakeup */
@@ -242,7 +243,7 @@ int __init musb_platform_init(struct musb *musb)
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
 	if (is_host_enabled(musb))
-		musb->board_set_vbus = omap_set_vbus;
+		musb->board_set_vbus = omap2430_musb_set_vbus;
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
@@ -265,7 +266,7 @@ void musb_platform_restore_context(struct musb *musb,
 }
 #endif
 
-static int musb_platform_suspend(struct musb *musb)
+static int omap2430_musb_suspend(struct musb *musb)
 {
 	u32 l;
 
@@ -291,7 +292,7 @@ static int musb_platform_suspend(struct musb *musb)
 	return 0;
 }
 
-static int musb_platform_resume(struct musb *musb)
+static int omap2430_musb_resume(struct musb *musb)
 {
 	u32 l;
 
@@ -316,12 +317,27 @@ static int musb_platform_resume(struct musb *musb)
 	return 0;
 }
 
-
-int musb_platform_exit(struct musb *musb)
+static int omap2430_musb_exit(struct musb *musb)
 {
 
-	musb_platform_suspend(musb);
+	omap2430_musb_suspend(musb);
 
 	otg_put_transceiver(musb->xceiv);
 	return 0;
 }
+
+const struct musb_platform_ops musb_ops = {
+	.init		= omap2430_musb_init,
+	.exit		= omap2430_musb_exit,
+
+	.suspend	= omap2430_musb_suspend,
+	.resume		= omap2430_musb_resume,
+
+	.enable		= omap2430_musb_enable,
+	.disable	= omap2430_musb_disable,
+
+	.set_mode	= omap2430_musb_set_mode,
+	.try_idle	= omap2430_musb_try_idle,
+
+	.set_vbus	= omap2430_musb_set_vbus,
+};
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 41b04b906ce1..60abd52b2c51 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -24,7 +24,7 @@
 
 #include "musb_core.h"
 
-static void tusb_source_power(struct musb *musb, int is_on);
+static void tusb_musb_set_vbus(struct musb *musb, int is_on);
 
 #define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
@@ -50,7 +50,7 @@ u8 tusb_get_revision(struct musb *musb)
 	return rev;
 }
 
-static int __init tusb_print_revision(struct musb *musb)
+static int tusb_print_revision(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u8		rev;
@@ -348,7 +348,7 @@ static void tusb_set_clock_source(struct musb *musb, unsigned mode)
  * USB link is not suspended ... and tells us the relevant wakeup
  * events.  SW_EN for voltage is handled separately.
  */
-void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		reg;
@@ -385,7 +385,7 @@ void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
 /*
  * Updates cable VBUS status. Caller must take care of locking.
  */
-int musb_platform_get_vbus_status(struct musb *musb)
+static int tusb_musb_vbus_status(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		otg_stat, prcm_mngmt;
@@ -431,7 +431,7 @@ static void musb_do_idle(unsigned long _musb)
 		}
 		/* FALLTHROUGH */
 	case OTG_STATE_A_IDLE:
-		tusb_source_power(musb, 0);
+		tusb_musb_set_vbus(musb, 0);
 	default:
 		break;
 	}
@@ -475,7 +475,7 @@ done:
  * we don't want to treat that full speed J as a wakeup event.
  * ... peripherals must draw only suspend current after 10 msec.
  */
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
 	static unsigned long	last_timer;
@@ -515,7 +515,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 				| TUSB_DEV_OTG_TIMER_ENABLE) \
 		: 0)
 
-static void tusb_source_power(struct musb *musb, int is_on)
+static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		conf, prcm, timer;
@@ -599,7 +599,7 @@ static void tusb_source_power(struct musb *musb, int is_on)
  * and peripheral modes in non-OTG configurations by reconfiguring hardware
  * and then setting musb->board_mode. For now, only support OTG mode.
  */
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
@@ -677,7 +677,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			default_a = is_host_enabled(musb);
 		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
 		musb->xceiv->default_a = default_a;
-		tusb_source_power(musb, default_a);
+		tusb_musb_set_vbus(musb, default_a);
 
 		/* Don't allow idling immediately */
 		if (default_a)
@@ -722,7 +722,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_IDLE:
 				DBG(2, "Got SRP, turning on VBUS\n");
-				musb_set_vbus(musb, 1);
+				musb_platform_set_vbus(musb, 1);
 
 				/* CONNECT can wake if a_wait_bcon is set */
 				if (musb->a_wait_bcon != 0)
@@ -748,11 +748,11 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 				 */
 				if (musb->vbuserr_retry) {
 					musb->vbuserr_retry--;
-					tusb_source_power(musb, 1);
+					tusb_musb_set_vbus(musb, 1);
 				} else {
 					musb->vbuserr_retry
 						= VBUSERR_RETRY_COUNT;
-					tusb_source_power(musb, 0);
+					tusb_musb_set_vbus(musb, 0);
 				}
 				break;
 			default:
@@ -786,7 +786,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			} else {
 				/* REVISIT report overcurrent to hub? */
 				ERR("vbus too slow, devctl %02x\n", devctl);
-				tusb_source_power(musb, 0);
+				tusb_musb_set_vbus(musb, 0);
 			}
 			break;
 		case OTG_STATE_A_WAIT_BCON:
@@ -807,7 +807,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 	return idle_timeout;
 }
 
-static irqreturn_t tusb_interrupt(int irq, void *__hci)
+static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
 {
 	struct musb	*musb = __hci;
 	void __iomem	*tbase = musb->ctrl_base;
@@ -911,7 +911,7 @@ static irqreturn_t tusb_interrupt(int irq, void *__hci)
 	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
 		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
 
-	musb_platform_try_idle(musb, idle_timeout);
+	tusb_musb_try_idle(musb, idle_timeout);
 
 	musb_writel(tbase, TUSB_INT_MASK, int_mask);
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -926,7 +926,7 @@ static int dma_off;
  * REVISIT:
  * - Check what is unnecessary in MGC_HdrcStart()
  */
-void musb_platform_enable(struct musb *musb)
+static void tusb_musb_enable(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -970,7 +970,7 @@ void musb_platform_enable(struct musb *musb)
 /*
  * Disables TUSB6010. Caller must take care of locking.
  */
-void musb_platform_disable(struct musb *musb)
+static void tusb_musb_disable(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -995,7 +995,7 @@ void musb_platform_disable(struct musb *musb)
  * Sets up TUSB6010 CPU interface specific signals and registers
  * Note: Settings optimized for OMAP24xx
  */
-static void __init tusb_setup_cpu_interface(struct musb *musb)
+static void tusb_setup_cpu_interface(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -1022,7 +1022,7 @@ static void __init tusb_setup_cpu_interface(struct musb *musb)
 	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
 }
 
-static int __init tusb_start(struct musb *musb)
+static int tusb_musb_start(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	int		ret = 0;
@@ -1091,7 +1091,7 @@ err:
 	return -ENODEV;
 }
 
-int __init musb_platform_init(struct musb *musb)
+static int tusb_musb_init(struct musb *musb)
 {
 	struct platform_device	*pdev;
 	struct resource		*mem;
@@ -1131,16 +1131,14 @@ int __init musb_platform_init(struct musb *musb)
 	 */
 	musb->mregs += TUSB_BASE_OFFSET;
 
-	ret = tusb_start(musb);
+	ret = tusb_musb_start(musb);
 	if (ret) {
 		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
 				ret);
 		goto done;
 	}
-	musb->isr = tusb_interrupt;
+	musb->isr = tusb_musb_interrupt;
 
-	if (is_host_enabled(musb))
-		musb->board_set_vbus = tusb_source_power;
 	if (is_peripheral_enabled(musb)) {
 		musb->xceiv->set_power = tusb_draw_power;
 		the_musb = musb;
@@ -1159,7 +1157,7 @@ done:
 	return ret;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int tusb_musb_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
 	the_musb = NULL;
@@ -1173,3 +1171,17 @@ int musb_platform_exit(struct musb *musb)
 	usb_nop_xceiv_unregister();
 	return 0;
 }
+
+const struct musb_platform_ops musb_ops = {
+	.init		= tusb_musb_init,
+	.exit		= tusb_musb_exit,
+
+	.enable		= tusb_musb_enable,
+	.disable	= tusb_musb_disable,
+
+	.set_mode	= tusb_musb_set_mode,
+	.try_idle	= tusb_musb_try_idle,
+
+	.vbus_status	= tusb_musb_vbus_status,
+	.set_vbus	= tusb_musb_set_vbus,
+};