summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-08-05 14:13:45 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-08-05 14:13:45 -0700
commit74cae210a335d159f2eb822e261adee905b6951a (patch)
treed9dd967fe200c53e04d18c825860c2b2b7188fa5
parent79b7e67bb9747e621ff1b646a125fbea26e08d56 (diff)
parent7ec4cdb321738d44ae5d405e7b6ac73dfbf99caa (diff)
downloadlinux-stable-74cae210a335d159f2eb822e261adee905b6951a.tar.gz
linux-stable-74cae210a335d159f2eb822e261adee905b6951a.tar.bz2
linux-stable-74cae210a335d159f2eb822e261adee905b6951a.zip
Merge tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger: "MTD core changes: - Dynamic partition support - Fix deadlock in sm_ftl - Various refcount fixes in maps, partitions and parser code - Integer overflow fixes in mtdchar - Support for Sercomm partitions NAND driver changes: - Clockrate fix for arasan - Add ATO25D1GA support - Double free fix for meson driver - Fix probe/remove methods in cafe NAND - Support unprotected spare data pages in qcom_nandc SPI NOR core changes: - move SECT_4K_PMC flag out of the core as it's a vendor specific flag - s/addr_width/addr_nbytes/g: address width means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing time we should not change members of struct spi_nor, but instead fill members of struct spi_nor_flash_parameters which could later on be used by the callers. - track flash's internal address mode so that we can use 4B opcodes together with opcodes that don't have a 4B opcode correspondent. SPI NOR manufacturer drivers changes: - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s". - micron-st: Skip FSR reading if SPI controller does not support it to allow flashes that support FSR to work even when attached to such SPI controllers. - spansion: Add s25hl-t/s25hs-t IDs and fixups" * tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits) mtd: core: check partition before dereference mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}() mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups mtd: spi-nor: spansion: Add local function to discover page size mtd: spi-nor: core: Track flash's internal address mode mtd: spi-nor: core: Return error code from set_4byte_addr_mode() mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes mtd: spi-nor: s/addr_width/addr_nbytes mtd: spi-nor: esmt: Use correct name of f25l32qa mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it MAINTAINERS: Use my kernel.org email mtd: rawnand: arasan: Fix clock rate in NV-DDR mtd: rawnand: arasan: Update NAND bus clock instead of system clock mtd: core: introduce of support for dynamic partitions dt-bindings: mtd: partitions: add additional example for qcom,smem-part dt-bindings: mtd: partitions: support label/name only partition mtd: spi-nor: move SECT_4K_PMC special handling mtd: dataflash: Add SPI ID table mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path ...
-rw-r--r--Documentation/devicetree/bindings/mtd/mxc-nand.yaml2
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/partition.yaml20
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml27
-rw-r--r--Documentation/devicetree/bindings/mtd/qcom,nandc.yaml27
-rw-r--r--MAINTAINERS2
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c8
-rw-r--r--drivers/mtd/devices/powernv_flash.c4
-rw-r--r--drivers/mtd/devices/spear_smi.c10
-rw-r--r--drivers/mtd/devices/st_spi_fsm.c23
-rw-r--r--drivers/mtd/hyperbus/hbmc-am654.c6
-rw-r--r--drivers/mtd/hyperbus/hyperbus-core.c8
-rw-r--r--drivers/mtd/hyperbus/rpc-if.c13
-rw-r--r--drivers/mtd/lpddr/lpddr2_nvm.c4
-rw-r--r--drivers/mtd/maps/physmap-core.c13
-rw-r--r--drivers/mtd/maps/physmap-versatile.c2
-rw-r--r--drivers/mtd/mtdchar.c13
-rw-r--r--drivers/mtd/mtdcore.c63
-rw-r--r--drivers/mtd/nand/raw/arasan-nand-controller.c16
-rw-r--r--drivers/mtd/nand/raw/atmel/nand-controller.c4
-rw-r--r--drivers/mtd/nand/raw/cafe_nand.c9
-rw-r--r--drivers/mtd/nand/raw/meson_nand.c17
-rw-r--r--drivers/mtd/nand/raw/omap2.c6
-rw-r--r--drivers/mtd/nand/raw/qcom_nandc.c306
-rw-r--r--drivers/mtd/nand/raw/sm_common.c2
-rw-r--r--drivers/mtd/nand/raw/tegra_nand.c5
-rw-r--r--drivers/mtd/nand/spi/Makefile2
-rw-r--r--drivers/mtd/nand/spi/ato.c86
-rw-r--r--drivers/mtd/nand/spi/core.c1
-rw-r--r--drivers/mtd/parsers/Kconfig9
-rw-r--r--drivers/mtd/parsers/Makefile1
-rw-r--r--drivers/mtd/parsers/ofpart_bcm4908.c3
-rw-r--r--drivers/mtd/parsers/redboot.c1
-rw-r--r--drivers/mtd/parsers/scpart.c249
-rw-r--r--drivers/mtd/sm_ftl.c2
-rw-r--r--drivers/mtd/spi-nor/controllers/hisi-sfc.c2
-rw-r--r--drivers/mtd/spi-nor/controllers/nxp-spifi.c8
-rw-r--r--drivers/mtd/spi-nor/core.c70
-rw-r--r--drivers/mtd/spi-nor/core.h21
-rw-r--r--drivers/mtd/spi-nor/debugfs.c2
-rw-r--r--drivers/mtd/spi-nor/esmt.c2
-rw-r--r--drivers/mtd/spi-nor/issi.c31
-rw-r--r--drivers/mtd/spi-nor/micron-st.c12
-rw-r--r--drivers/mtd/spi-nor/otp.c12
-rw-r--r--drivers/mtd/spi-nor/sfdp.c34
-rw-r--r--drivers/mtd/spi-nor/spansion.c185
-rw-r--r--drivers/mtd/spi-nor/xilinx.c2
-rw-r--r--include/linux/mtd/hyperbus.h4
-rw-r--r--include/linux/mtd/spi-nor.h4
-rw-r--r--include/linux/mtd/spinand.h1
-rw-r--r--include/uapi/mtd/mtd-abi.h4
50 files changed, 1108 insertions, 250 deletions
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
index 73b86f2226c7..66da1b476ab7 100644
--- a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
@@ -37,6 +37,4 @@ examples:
compatible = "fsl,imx27-nand";
reg = <0xd8000000 0x1000>;
interrupts = <29>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index e1ac08064425..f1a02d840b12 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -11,6 +11,17 @@ description: |
relative offset and size specified. Depending on partition function extra
properties can be used.
+ A partition may be dynamically allocated by a specific parser at runtime.
+ In this specific case, a specific suffix is required to the node name.
+ Everything after 'partition-' will be used as the partition name to compare
+ with the one dynamically allocated by the specific parser.
+ If the partition contains invalid char a label can be provided that will
+ be used instead of the node name to make the comparison.
+ This is used to assign an OF node to the dynamiccally allocated partition
+ so that subsystem like NVMEM can provide an OF node and declare NVMEM cells.
+ The OF node will be assigned only if the partition label declared match the
+ one assigned by the parser at runtime.
+
maintainers:
- Rafał Miłecki <rafal@milecki.pl>
@@ -41,7 +52,12 @@ properties:
immune to paired-pages corruptions
type: boolean
-required:
- - reg
+if:
+ not:
+ required: [ reg ]
+then:
+ properties:
+ $nodename:
+ pattern: '^partition-.*$'
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
index cf3f8c1e035d..dc07909af023 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
@@ -19,6 +19,10 @@ properties:
compatible:
const: qcom,smem-part
+patternProperties:
+ "^partition-[0-9a-z]+$":
+ $ref: partition.yaml#
+
required:
- compatible
@@ -31,3 +35,26 @@ examples:
compatible = "qcom,smem-part";
};
};
+
+ - |
+ /* Example declaring dynamic partition */
+ flash {
+ partitions {
+ compatible = "qcom,smem-part";
+
+ partition-art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "0:art";
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 84ad7ff30121..482a2c068740 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -102,6 +102,31 @@ allOf:
- const: rx
- const: cmd
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq806x-nand
+
+ then:
+ properties:
+ qcom,boot-partitions:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: offset
+ - description: size
+ description:
+ Boot partition use a different layout where the 4 bytes of spare
+ data are not protected by ECC. Use this to declare these special
+ partitions by defining first the offset and then the size.
+
+ It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+ and should be declared in ascending order.
+
+ Refer to the ipq8064 example on how to use this special binding.
+
required:
- compatible
- reg
@@ -135,6 +160,8 @@ examples:
nand-ecc-strength = <4>;
nand-bus-width = <8>;
+ qcom,boot-partitions = <0x0 0x58a0000>;
+
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
diff --git a/MAINTAINERS b/MAINTAINERS
index 9fbc30d3c95e..b995141d251f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19130,7 +19130,7 @@ F: drivers/pinctrl/spear/
SPI NOR SUBSYSTEM
M: Tudor Ambarus <tudor.ambarus@microchip.com>
-M: Pratyush Yadav <p.yadav@ti.com>
+M: Pratyush Yadav <pratyush@kernel.org>
R: Michael Walle <michael@walle.cc>
L: linux-mtd@lists.infradead.org
S: Maintained
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 134e27328597..25bad4318305 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -112,6 +112,13 @@ static const struct of_device_id dataflash_dt_ids[] = {
MODULE_DEVICE_TABLE(of, dataflash_dt_ids);
#endif
+static const struct spi_device_id dataflash_spi_ids[] = {
+ { .name = "at45", },
+ { .name = "dataflash", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, dataflash_spi_ids);
+
/* ......................................................................... */
/*
@@ -936,6 +943,7 @@ static struct spi_driver dataflash_driver = {
.probe = dataflash_probe,
.remove = dataflash_remove,
+ .id_table = dataflash_spi_ids,
/* FIXME: investigate suspend and resume... */
};
diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c
index 6950a8764815..36e060386e59 100644
--- a/drivers/mtd/devices/powernv_flash.c
+++ b/drivers/mtd/devices/powernv_flash.c
@@ -270,7 +270,9 @@ static int powernv_flash_release(struct platform_device *pdev)
struct powernv_flash *data = dev_get_drvdata(&(pdev->dev));
/* All resources should be freed automatically */
- return mtd_device_unregister(&(data->mtd));
+ WARN_ON(mtd_device_unregister(&data->mtd));
+
+ return 0;
}
static const struct of_device_id powernv_flash_match[] = {
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 24073518587f..f58742486d3d 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -1045,13 +1045,9 @@ static int spear_smi_remove(struct platform_device *pdev)
{
struct spear_smi *dev;
struct spear_snor_flash *flash;
- int ret, i;
+ int i;
dev = platform_get_drvdata(pdev);
- if (!dev) {
- dev_err(&pdev->dev, "dev is null\n");
- return -ENODEV;
- }
/* clean up for all nor flash */
for (i = 0; i < dev->num_flashes; i++) {
@@ -1060,9 +1056,7 @@ static int spear_smi_remove(struct platform_device *pdev)
continue;
/* clean up mtd stuff */
- ret = mtd_device_unregister(&flash->mtd);
- if (ret)
- dev_err(&pdev->dev, "error removing mtd\n");
+ WARN_ON(mtd_device_unregister(&flash->mtd));
}
clk_disable_unprepare(dev->clk);
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index d3377b10fc0f..54861d889c30 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -2084,15 +2084,12 @@ static int stfsm_probe(struct platform_device *pdev)
* Configure READ/WRITE/ERASE sequences according to platform and
* device flags.
*/
- if (info->config) {
+ if (info->config)
ret = info->config(fsm);
- if (ret)
- goto err_clk_unprepare;
- } else {
+ else
ret = stfsm_prepare_rwe_seqs_default(fsm);
- if (ret)
- goto err_clk_unprepare;
- }
+ if (ret)
+ goto err_clk_unprepare;
fsm->mtd.name = info->name;
fsm->mtd.dev.parent = &pdev->dev;
@@ -2115,10 +2112,12 @@ static int stfsm_probe(struct platform_device *pdev)
(long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
- return mtd_device_register(&fsm->mtd, NULL, 0);
-
+ ret = mtd_device_register(&fsm->mtd, NULL, 0);
+ if (ret) {
err_clk_unprepare:
- clk_disable_unprepare(fsm->clk);
+ clk_disable_unprepare(fsm->clk);
+ }
+
return ret;
}
@@ -2126,9 +2125,11 @@ static int stfsm_remove(struct platform_device *pdev)
{
struct stfsm *fsm = platform_get_drvdata(pdev);
+ WARN_ON(mtd_device_unregister(&fsm->mtd));
+
clk_disable_unprepare(fsm->clk);
- return mtd_device_unregister(&fsm->mtd);
+ return 0;
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c
index a3439b791eeb..a6161ce340d4 100644
--- a/drivers/mtd/hyperbus/hbmc-am654.c
+++ b/drivers/mtd/hyperbus/hbmc-am654.c
@@ -233,16 +233,16 @@ static int am654_hbmc_remove(struct platform_device *pdev)
{
struct am654_hbmc_priv *priv = platform_get_drvdata(pdev);
struct am654_hbmc_device_priv *dev_priv = priv->hbdev.priv;
- int ret;
- ret = hyperbus_unregister_device(&priv->hbdev);
+ hyperbus_unregister_device(&priv->hbdev);
+
if (priv->mux_ctrl)
mux_control_deselect(priv->mux_ctrl);
if (dev_priv->rx_chan)
dma_release_channel(dev_priv->rx_chan);
- return ret;
+ return 0;
}
static const struct of_device_id am654_hbmc_dt_ids[] = {
diff --git a/drivers/mtd/hyperbus/hyperbus-core.c b/drivers/mtd/hyperbus/hyperbus-core.c
index 2f9fc4e17d53..4d8047d43e48 100644
--- a/drivers/mtd/hyperbus/hyperbus-core.c
+++ b/drivers/mtd/hyperbus/hyperbus-core.c
@@ -126,16 +126,12 @@ int hyperbus_register_device(struct hyperbus_device *hbdev)
}
EXPORT_SYMBOL_GPL(hyperbus_register_device);
-int hyperbus_unregister_device(struct hyperbus_device *hbdev)
+void hyperbus_unregister_device(struct hyperbus_device *hbdev)
{
- int ret = 0;
-
if (hbdev && hbdev->mtd) {
- ret = mtd_device_unregister(hbdev->mtd);
+ WARN_ON(mtd_device_unregister(hbdev->mtd));
map_destroy(hbdev->mtd);
}
-
- return ret;
}
EXPORT_SYMBOL_GPL(hyperbus_unregister_device);
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
index 6e08ec1d4f09..d00d30243403 100644
--- a/drivers/mtd/hyperbus/rpc-if.c
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -134,7 +134,7 @@ static int rpcif_hb_probe(struct platform_device *pdev)
error = rpcif_hw_init(&hyperbus->rpc, true);
if (error)
- return error;
+ goto out_disable_rpm;
hyperbus->hbdev.map.size = hyperbus->rpc.size;
hyperbus->hbdev.map.virt = hyperbus->rpc.dirmap;
@@ -145,19 +145,24 @@ static int rpcif_hb_probe(struct platform_device *pdev)
hyperbus->hbdev.np = of_get_next_child(pdev->dev.parent->of_node, NULL);
error = hyperbus_register_device(&hyperbus->hbdev);
if (error)
- rpcif_disable_rpm(&hyperbus->rpc);
+ goto out_disable_rpm;
+
+ return 0;
+out_disable_rpm:
+ rpcif_disable_rpm(&hyperbus->rpc);
return error;
}
static int rpcif_hb_remove(struct platform_device *pdev)
{
struct rpcif_hyperbus *hyperbus = platform_get_drvdata(pdev);
- int error = hyperbus_unregister_device(&hyperbus->hbdev);
+
+ hyperbus_unregister_device(&hyperbus->hbdev);
rpcif_disable_rpm(&hyperbus->rpc);
- return error;
+ return 0;
}
static struct platform_driver rpcif_platform_driver = {
diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c
index 72f5c7b30079..367e2d906de0 100644
--- a/drivers/mtd/lpddr/lpddr2_nvm.c
+++ b/drivers/mtd/lpddr/lpddr2_nvm.c
@@ -478,7 +478,9 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
*/
static int lpddr2_nvm_remove(struct platform_device *pdev)
{
- return mtd_device_unregister(dev_get_drvdata(&pdev->dev));
+ WARN_ON(mtd_device_unregister(dev_get_drvdata(&pdev->dev)));
+
+ return 0;
}
/* Initialize platform_driver data structure for lpddr2_nvm */
diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index 4f63b8430c71..85eca6a192e6 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -66,18 +66,12 @@ static int physmap_flash_remove(struct platform_device *dev)
{
struct physmap_flash_info *info;
struct physmap_flash_data *physmap_data;
- int i, err = 0;
+ int i;
info = platform_get_drvdata(dev);
- if (!info) {
- err = -EINVAL;
- goto out;
- }
if (info->cmtd) {
- err = mtd_device_unregister(info->cmtd);
- if (err)
- goto out;
+ WARN_ON(mtd_device_unregister(info->cmtd));
if (info->cmtd != info->mtds[0])
mtd_concat_destroy(info->cmtd);
@@ -92,10 +86,9 @@ static int physmap_flash_remove(struct platform_device *dev)
if (physmap_data && physmap_data->exit)
physmap_data->exit(dev);
-out:
pm_runtime_put(&dev->dev);
pm_runtime_disable(&dev->dev);
- return err;
+ return 0;
}
static void physmap_set_vpp(struct map_info *map, int state)
diff --git a/drivers/mtd/maps/physmap-versatile.c b/drivers/mtd/maps/physmap-versatile.c
index ad7cd9cfaee0..a1b8b7b25f88 100644
--- a/drivers/mtd/maps/physmap-versatile.c
+++ b/drivers/mtd/maps/physmap-versatile.c
@@ -93,6 +93,7 @@ static int ap_flash_init(struct platform_device *pdev)
return -ENODEV;
}
ebi_base = of_iomap(ebi, 0);
+ of_node_put(ebi);
if (!ebi_base)
return -ENODEV;
@@ -207,6 +208,7 @@ int of_flash_probe_versatile(struct platform_device *pdev,
versatile_flashprot = (enum versatile_flashprot)devid->data;
rmap = syscon_node_to_regmap(sysnp);
+ of_node_put(sysnp);
if (IS_ERR(rmap))
return PTR_ERR(rmap);
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index d0f9c4b0285c..05860288a7af 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -615,21 +615,24 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd,
if (!usr_oob)
req.ooblen = 0;
+ req.len &= 0xffffffff;
+ req.ooblen &= 0xffffffff;
+
if (req.start + req.len > mtd->size)
return -EINVAL;
datbuf_len = min_t(size_t, req.len, mtd->erasesize);
if (datbuf_len > 0) {
- datbuf = kmalloc(datbuf_len, GFP_KERNEL);
+ datbuf = kvmalloc(datbuf_len, GFP_KERNEL);
if (!datbuf)
return -ENOMEM;
}
oobbuf_len = min_t(size_t, req.ooblen, mtd->erasesize);
if (oobbuf_len > 0) {
- oobbuf = kmalloc(oobbuf_len, GFP_KERNEL);
+ oobbuf = kvmalloc(oobbuf_len, GFP_KERNEL);
if (!oobbuf) {
- kfree(datbuf);
+ kvfree(datbuf);
return -ENOMEM;
}
}
@@ -679,8 +682,8 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd,
usr_oob += ops.oobretlen;
}
- kfree(datbuf);
- kfree(oobbuf);
+ kvfree(datbuf);
+ kvfree(oobbuf);
return ret;
}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 9eb0680db312..a9b8be9f40dc 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -546,6 +546,68 @@ static int mtd_nvmem_add(struct mtd_info *mtd)
return 0;
}
+static void mtd_check_of_node(struct mtd_info *mtd)
+{
+ struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
+ const char *pname, *prefix = "partition-";
+ int plen, mtd_name_len, offset, prefix_len;
+ struct mtd_info *parent;
+ bool found = false;
+
+ /* Check if MTD already has a device node */
+ if (dev_of_node(&mtd->dev))
+ return;
+
+ /* Check if a partitions node exist */
+ if (!mtd_is_partition(mtd))
+ return;
+ parent = mtd->parent;
+ parent_dn = dev_of_node(&parent->dev);
+ if (!parent_dn)
+ return;
+
+ partitions = of_get_child_by_name(parent_dn, "partitions");
+ if (!partitions)
+ goto exit_parent;
+
+ prefix_len = strlen(prefix);
+ mtd_name_len = strlen(mtd->name);
+
+ /* Search if a partition is defined with the same name */
+ for_each_child_of_node(partitions, mtd_dn) {
+ offset = 0;
+
+ /* Skip partition with no/wrong prefix */
+ if (!of_node_name_prefix(mtd_dn, "partition-"))
+ continue;
+
+ /* Label have priority. Check that first */
+ if (of_property_read_string(mtd_dn, "label", &pname)) {
+ of_property_read_string(mtd_dn, "name", &pname);
+ offset = prefix_len;
+ }
+
+ plen = strlen(pname) - offset;
+ if (plen == mtd_name_len &&
+ !strncmp(mtd->name, pname + offset, plen)) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found)
+ goto exit_partitions;
+
+ /* Set of_node only for nvmem */
+ if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
+ mtd_set_of_node(mtd, mtd_dn);
+
+exit_partitions:
+ of_node_put(partitions);
+exit_parent:
+ of_node_put(parent_dn);
+}
+
/**
* add_mtd_device - register an MTD device
* @mtd: pointer to new MTD device info structure
@@ -658,6 +720,7 @@ int add_mtd_device(struct mtd_info *mtd)
mtd->dev.devt = MTD_DEVT(i);
dev_set_name(&mtd->dev, "mtd%d", i);
dev_set_drvdata(&mtd->dev, mtd);
+ mtd_check_of_node(mtd);
of_node_get(mtd_get_of_node(mtd));
error = device_register(&mtd->dev);
if (error)
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 53bd10738418..296fb16c8dc3 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -347,17 +347,17 @@ static int anfc_select_target(struct nand_chip *chip, int target)
/* Update clock frequency */
if (nfc->cur_clk != anand->clk) {
- clk_disable_unprepare(nfc->controller_clk);
- ret = clk_set_rate(nfc->controller_clk, anand->clk);
+ clk_disable_unprepare(nfc->bus_clk);
+ ret = clk_set_rate(nfc->bus_clk, anand->clk);
if (ret) {
dev_err(nfc->dev, "Failed to change clock rate\n");
return ret;
}
- ret = clk_prepare_enable(nfc->controller_clk);
+ ret = clk_prepare_enable(nfc->bus_clk);
if (ret) {
dev_err(nfc->dev,
- "Failed to re-enable the controller clock\n");
+ "Failed to re-enable the bus clock\n");
return ret;
}
@@ -1043,7 +1043,13 @@ static int anfc_setup_interface(struct nand_chip *chip, int target,
DQS_BUFF_SEL_OUT(dqs_mode);
}
- anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
+ if (nand_interface_is_sdr(conf)) {
+ anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
+ } else {
+ /* ONFI timings are defined in picoseconds */
+ anand->clk = div_u64((u64)NSEC_PER_SEC * 1000,
+ conf->timings.nvddr.tCK_min);
+ }
/*
* Due to a hardware bug in the ZynqMP SoC, SDR timing modes 0-1 work
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 6ef14442c71a..c9ac3baf68c0 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -2629,7 +2629,9 @@ static int atmel_nand_controller_remove(struct platform_device *pdev)
{
struct atmel_nand_controller *nc = platform_get_drvdata(pdev);
- return nc->caps->ops->remove(nc);
+ WARN_ON(nc->caps->ops->remove(nc));
+
+ return 0;
}
static __maybe_unused int atmel_nand_controller_resume(struct device *dev)
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 9dbf031716a6..af119e376352 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -679,8 +679,10 @@ static int cafe_nand_probe(struct pci_dev *pdev,
pci_set_master(pdev);
cafe = kzalloc(sizeof(*cafe), GFP_KERNEL);
- if (!cafe)
- return -ENOMEM;
+ if (!cafe) {
+ err = -ENOMEM;
+ goto out_disable_device;
+ }
mtd = nand_to_mtd(&cafe->nand);
mtd->dev.parent = &pdev->dev;
@@ -801,6 +803,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
pci_iounmap(pdev, cafe->mmio);
out_free_mtd:
kfree(cafe);
+ out_disable_device:
+ pci_disable_device(pdev);
out:
return err;
}
@@ -822,6 +826,7 @@ static void cafe_nand_remove(struct pci_dev *pdev)
pci_iounmap(pdev, cafe->mmio);
dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
kfree(cafe);
+ pci_disable_device(pdev);
}
static const struct pci_device_id cafe_nand_tbl[] = {
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index ac3be92872d0..829b76b303aa 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1293,26 +1293,20 @@ meson_nfc_nand_chip_init(struct device *dev,
return 0;
}
-static int meson_nfc_nand_chip_cleanup(struct meson_nfc *nfc)
+static void meson_nfc_nand_chip_cleanup(struct meson_nfc *nfc)
{
struct meson_nfc_nand_chip *meson_chip;
struct mtd_info *mtd;
- int ret;
while (!list_empty(&nfc->chips)) {
meson_chip = list_first_entry(&nfc->chips,
struct meson_nfc_nand_chip, node);
mtd = nand_to_mtd(&meson_chip->nand);
- ret = mtd_device_unregister(mtd);
- if (ret)
- return ret;
+ WARN_ON(mtd_device_unregister(mtd));
- meson_nfc_free_buffer(&meson_chip->nand);
nand_cleanup(&meson_chip->nand);
list_del(&meson_chip->node);
}
-
- return 0;
}
static int meson_nfc_nand_chips_init(struct device *dev,
@@ -1445,16 +1439,11 @@ err_clk:
static int meson_nfc_remove(struct platform_device *pdev)
{
struct meson_nfc *nfc = platform_get_drvdata(pdev);
- int ret;
- ret = meson_nfc_nand_chip_cleanup(nfc);
- if (ret)
- return ret;
+ meson_nfc_nand_chip_cleanup(nfc);
meson_nfc_disable_clk(nfc);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 58c32a11792e..4a9f2b6c772d 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -2278,16 +2278,14 @@ static int omap_nand_remove(struct platform_device *pdev)
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct nand_chip *nand_chip = mtd_to_nand(mtd);
struct omap_nand_info *info = mtd_to_omap(mtd);
- int ret;
rawnand_sw_bch_cleanup(nand_chip);
if (info->dma)
dma_release_channel(info->dma);
- ret = mtd_device_unregister(mtd);
- WARN_ON(ret);
+ WARN_ON(mtd_device_unregister(mtd));
nand_cleanup(nand_chip);
- return ret;
+ return 0;
}
/* omap_nand_ids defined in linux/platform_data/mtd-nand-omap2.h */
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 048b255faa76..8f80019a9f01 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -80,8 +80,10 @@
#define DISABLE_STATUS_AFTER_WRITE 4
#define CW_PER_PAGE 6
#define UD_SIZE_BYTES 9
+#define UD_SIZE_BYTES_MASK GENMASK(18, 9)
#define ECC_PARITY_SIZE_BYTES_RS 19
#define SPARE_SIZE_BYTES 23
+#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23)
#define NUM_ADDR_CYCLES 27
#define STATUS_BFR_READ 30
#define SET_RD_MODE_AFTER_STATUS 31
@@ -102,6 +104,7 @@
#define ECC_MODE 4
#define ECC_PARITY_SIZE_BYTES_BCH 8
#define ECC_NUM_DATA_BYTES 16
+#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16)
#define ECC_FORCE_CLK_OPEN 30
/* NAND_DEV_CMD1 bits */
@@ -238,6 +241,9 @@ nandc_set_reg(chip, reg, \
* @bam_ce - the array of BAM command elements
* @cmd_sgl - sgl for NAND BAM command pipe
* @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @last_data_desc - last DMA desc in data channel (tx/rx).
+ * @last_cmd_desc - last DMA desc in command channel.
+ * @txn_done - completion for NAND transfer.
* @bam_ce_pos - the index in bam_ce which is available for next sgl
* @bam_ce_start - the index in bam_ce which marks the start position ce
* for current sgl. It will be used for size calculation
@@ -250,14 +256,14 @@ nandc_set_reg(chip, reg, \
* @rx_sgl_start - start index in data sgl for rx.
* @wait_second_completion - wait for second DMA desc completion before making
* the NAND transfer completion.
- * @txn_done - completion for NAND transfer.
- * @last_data_desc - last DMA desc in data channel (tx/rx).
- * @last_cmd_desc - last DMA desc in command channel.
*/
struct bam_transaction {
struct bam_cmd_element *bam_ce;
struct scatterlist *cmd_sgl;
struct scatterlist *data_sgl;
+ struct dma_async_tx_descriptor *last_data_desc;
+ struct dma_async_tx_descriptor *last_cmd_desc;
+ struct completion txn_done;
u32 bam_ce_pos;
u32 bam_ce_start;
u32 cmd_sgl_pos;
@@ -267,25 +273,23 @@ struct bam_transaction {
u32 rx_sgl_pos;
u32 rx_sgl_start;
bool wait_second_completion;
- struct completion txn_done;
- struct dma_async_tx_descriptor *last_data_desc;
- struct dma_async_tx_descriptor *last_cmd_desc;
};
/*
* This data type corresponds to the nand dma descriptor
+ * @dma_desc - low level DMA engine descriptor
* @list - list for desc_info
- * @dir - DMA transfer direction
+ *
* @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
* ADM
* @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
* @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
- * @dma_desc - low level DMA engine descriptor
+ * @dir - DMA transfer direction
*/
struct desc_info {
+ struct dma_async_tx_descriptor *dma_desc;
struct list_head node;
- enum dma_data_direction dir;
union {
struct scatterlist adm_sgl;
struct {
@@ -293,7 +297,7 @@ struct desc_info {
int sgl_cnt;
};
};
- struct dma_async_tx_descriptor *dma_desc;
+ enum dma_data_direction dir;
};
/*
@@ -337,52 +341,64 @@ struct nandc_regs {
/*
* NAND controller data struct
*
- * @controller: base controller structure
- * @host_list: list containing all the chips attached to the
- * controller
* @dev: parent device
+ *
* @base: MMIO base
- * @base_phys: physical base address of controller registers
- * @base_dma: dma base address of controller registers
+ *
* @core_clk: controller clock
* @aon_clk: another controller clock
*
+ * @regs: a contiguous chunk of memory for DMA register
+ * writes. contains the register values to be
+ * written to controller
+ *
+ * @props: properties of current NAND controller,
+ * initialized via DT match data
+ *
+ * @controller: base controller structure
+ * @host_list: list containing all the chips attached to the
+ * controller
+ *
* @chan: dma channel
* @cmd_crci: ADM DMA CRCI for command flow control
* @data_crci: ADM DMA CRCI for data flow control
+ *
* @desc_list: DMA descriptor list (list of desc_infos)
*
* @data_buffer: our local DMA buffer for page read/writes,
* used when we can't use the buffer provided
* by upper layers directly
- * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
- * functions
* @reg_read_buf: local buffer for reading back registers via DMA
+ *
+ * @base_phys: physical base address of controller registers
+ * @base_dma: dma base address of controller registers
* @reg_read_dma: contains dma address for register read buffer
- * @reg_read_pos: marker for data read in reg_read_buf
*
- * @regs: a contiguous chunk of memory for DMA register
- * writes. contains the register values to be
- * written to controller
- * @cmd1/vld: some fixed controller register values
- * @props: properties of current NAND controller,
- * initialized via DT match data
+ * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
+ * functions
* @max_cwperpage: maximum QPIC codewords required. calculated
* from all connected NAND devices pagesize
+ *
+ * @reg_read_pos: marker for data read in reg_read_buf
+ *
+ * @cmd1/vld: some fixed controller register values
*/
struct qcom_nand_controller {
- struct nand_controller controller;
- struct list_head host_list;
-
struct device *dev;
void __iomem *base;
- phys_addr_t base_phys;
- dma_addr_t base_dma;
struct clk *core_clk;
struct clk *aon_clk;
+ struct nandc_regs *regs;
+ struct bam_transaction *bam_txn;
+
+ const struct qcom_nandc_props *props;
+
+ struct nand_controller controller;
+ struct list_head host_list;
+
union {
/* will be used only by QPIC for BAM DMA */
struct {
@@ -400,64 +416,89 @@ struct qcom_nand_controller {
};
struct list_head desc_list;
- struct bam_transaction *bam_txn;
u8 *data_buffer;
+ __le32 *reg_read_buf;
+
+ phys_addr_t base_phys;
+ dma_addr_t base_dma;
+ dma_addr_t reg_read_dma;
+
int buf_size;
int buf_count;
int buf_start;
unsigned int max_cwperpage;
- __le32 *reg_read_buf;
- dma_addr_t reg_read_dma;
int reg_read_pos;
- struct nandc_regs *regs;
-
u32 cmd1, vld;
- const struct qcom_nandc_props *props;
+};
+
+/*
+ * NAND special boot partitions
+ *
+ * @page_offset: offset of the partition where spare data is not protected
+ * by ECC (value in pages)
+ * @page_offset: size of the partition where spare data is not protected
+ * by ECC (value in pages)
+ */
+struct qcom_nand_boot_partition {
+ u32 page_offset;
+ u32 page_size;
};
/*
* NAND chip structure
*
+ * @boot_partitions: array of boot partitions where offset and size of the
+ * boot partitions are stored
+ *
* @chip: base NAND chip structure
* @node: list node to add itself to host_list in
* qcom_nand_controller
*
+ * @nr_boot_partitions: count of the boot partitions where spare data is not
+ * protected by ECC
+ *
* @cs: chip select value for this chip
* @cw_size: the number of bytes in a single step/codeword
* of a page, consisting of all data, ecc, spare
* and reserved bytes
* @cw_data: the number of bytes within a codeword protected
* by ECC
- * @use_ecc: request the controller to use ECC for the
- * upcoming read/write
- * @bch_enabled: flag to tell whether BCH ECC mode is used
* @ecc_bytes_hw: ECC bytes used by controller hardware for this
* chip
- * @status: value to be returned if NAND_CMD_STATUS command
- * is executed
+ *
* @last_command: keeps track of last command on this chip. used
* for reading correct status
*
* @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
* ecc/non-ecc mode for the current nand flash
* device
+ *
+ * @status: value to be returned if NAND_CMD_STATUS command
+ * is executed
+ * @codeword_fixup: keep track of the current layout used by
+ * the driver for read/write operation.
+ * @use_ecc: request the controller to use ECC for the
+ * upcoming read/write
+ * @bch_enabled: flag to tell whether BCH ECC mode is used
*/
struct qcom_nand_host {
+ struct qcom_nand_boot_partition *boot_partitions;
+
struct nand_chip chip;
struct list_head node;
+ int nr_boot_partitions;
+
int cs;
int cw_size;
int cw_data;
- bool use_ecc;
- bool bch_enabled;
int ecc_bytes_hw;
int spare_bytes;
int bbm_size;
- u8 status;
+
int last_command;
u32 cfg0, cfg1;
@@ -466,23 +507,30 @@ struct qcom_nand_host {
u32 ecc_bch_cfg;
u32 clrflashstatus;
u32 clrreadstatus;
+
+ u8 status;
+ bool codeword_fixup;
+ bool use_ecc;
+ bool bch_enabled;
};
/*
* This data type corresponds to the NAND controller properties which varies
* among different NAND controllers.
* @ecc_modes - ecc mode for NAND
+ * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
* @is_bam - whether NAND controller is using BAM
* @is_qpic - whether NAND CTRL is part of qpic IP
* @qpic_v2 - flag to indicate QPIC IP version 2
- * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
+ * @use_codeword_fixup - whether NAND has different layout for boot partitions
*/
struct qcom_nandc_props {
u32 ecc_modes;
+ u32 dev_cmd_reg_start;
bool is_bam;
bool is_qpic;
bool qpic_v2;
- u32 dev_cmd_reg_start;
+ bool use_codeword_fixup;
};
/* Frees the BAM transaction memory */
@@ -1701,7 +1749,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
- if (qcom_nandc_is_last_cw(ecc, cw)) {
+ if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) {
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) * 4);
oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
@@ -1782,7 +1830,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
}
for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
- if (qcom_nandc_is_last_cw(ecc, cw)) {
+ if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) {
data_size = ecc->size - ((ecc->steps - 1) * 4);
oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
} else {
@@ -1940,7 +1988,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
- if (qcom_nandc_is_last_cw(ecc, i)) {
+ if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
@@ -2037,6 +2085,69 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
return ret;
}
+static bool qcom_nandc_is_boot_partition(struct qcom_nand_host *host, int page)
+{
+ struct qcom_nand_boot_partition *boot_partition;
+ u32 start, end;
+ int i;
+
+ /*
+ * Since the frequent access will be to the non-boot partitions like rootfs,
+ * optimize the page check by:
+ *
+ * 1. Checking if the page lies after the last boot partition.
+ * 2. Checking from the boot partition end.
+ */
+
+ /* First check the last boot partition */
+ boot_partition = &host->boot_partitions[host->nr_boot_partitions - 1];
+ start = boot_partition->page_offset;
+ end = start + boot_partition->page_size;
+
+ /* Page is after the last boot partition end. This is NOT a boot partition */
+ if (page > end)
+ return false;
+
+ /* Actually check if it's a boot partition */
+ if (page < end && page >= start)
+ return true;
+
+ /* Check the other boot partitions starting from the second-last partition */
+ for (i = host->nr_boot_partitions - 2; i >= 0; i--) {
+ boot_partition = &host->boot_partitions[i];
+ start = boot_partition->page_offset;
+ end = start + boot_partition->page_size;
+
+ if (page < end && page >= start)
+ return true;
+ }
+
+ return false;
+}
+
+static void qcom_nandc_codeword_fixup(struct qcom_nand_host *host, int page)
+{
+ bool codeword_fixup = qcom_nandc_is_boot_partition(host, page);
+
+ /* Skip conf write if we are already in the correct mode */
+ if (codeword_fixup == host->codeword_fixup)
+ return;
+
+ host->codeword_fixup = codeword_fixup;
+
+ host->cw_data = codeword_fixup ? 512 : 516;
+ host->spare_bytes = host->cw_size - host->ecc_bytes_hw -
+ host->bbm_size - host->cw_data;
+
+ host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK);
+ host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES |
+ host->cw_data << UD_SIZE_BYTES;
+
+ host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK;
+ host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES;
+ host->ecc_buf_cfg = (host->cw_data - 1) << NUM_STEPS;
+}
+
/* implements ecc->read_page() */
static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
int oob_required, int page)
@@ -2045,6 +2156,9 @@ static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
u8 *data_buf, *oob_buf = NULL;
+ if (host->nr_boot_partitions)
+ qcom_nandc_codeword_fixup(host, page);
+
nand_read_page_op(chip, page, 0, NULL, 0);
data_buf = buf;
oob_buf = oob_required ? chip->oob_poi : NULL;
@@ -2064,6 +2178,9 @@ static int qcom_nandc_read_page_raw(struct nand_chip *chip, uint8_t *buf,
int cw, ret;
u8 *data_buf = buf, *oob_buf = chip->oob_poi;
+ if (host->nr_boot_partitions)
+ qcom_nandc_codeword_fixup(host, page);
+
for (cw = 0; cw < ecc->steps; cw++) {
ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf,
page, cw);
@@ -2084,6 +2201,9 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ if (host->nr_boot_partitions)
+ qcom_nandc_codeword_fixup(host, page);
+
clear_read_regs(nandc);
clear_bam_transaction(nandc);
@@ -2104,6 +2224,9 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
u8 *data_buf, *oob_buf;
int i, ret;
+ if (host->nr_boot_partitions)
+ qcom_nandc_codeword_fixup(host, page);
+
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
clear_read_regs(nandc);
@@ -2119,7 +2242,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
- if (qcom_nandc_is_last_cw(ecc, i)) {
+ if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
@@ -2176,6 +2299,9 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
u8 *data_buf, *oob_buf;
int i, ret;
+ if (host->nr_boot_partitions)
+ qcom_nandc_codeword_fixup(host, page);
+
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
clear_read_regs(nandc);
clear_bam_transaction(nandc);
@@ -2194,7 +2320,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
- if (qcom_nandc_is_last_cw(ecc, i)) {
+ if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) << 2);
oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
@@ -2254,6 +2380,9 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
int data_size, oob_size;
int ret;
+ if (host->nr_boot_partitions)
+ qcom_nandc_codeword_fixup(host, page);
+
host->use_ecc = true;
clear_bam_transaction(nandc);
@@ -2915,6 +3044,74 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
static const char * const probes[] = { "cmdlinepart", "ofpart", "qcomsmem", NULL };
+static int qcom_nand_host_parse_boot_partitions(struct qcom_nand_controller *nandc,
+ struct qcom_nand_host *host,
+ struct device_node *dn)
+{
+ struct nand_chip *chip = &host->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct qcom_nand_boot_partition *boot_partition;
+ struct device *dev = nandc->dev;
+ int partitions_count, i, j, ret;
+
+ if (!of_find_property(dn, "qcom,boot-partitions", NULL))
+ return 0;
+
+ partitions_count = of_property_count_u32_elems(dn, "qcom,boot-partitions");
+ if (partitions_count <= 0) {
+ dev_err(dev, "Error parsing boot partition\n");
+ return partitions_count ? partitions_count : -EINVAL;
+ }
+
+ host->nr_boot_partitions = partitions_count / 2;
+ host->boot_partitions = devm_kcalloc(dev, host->nr_boot_partitions,
+ sizeof(*host->boot_partitions), GFP_KERNEL);
+ if (!host->boot_partitions) {
+ host->nr_boot_partitions = 0;
+ return -ENOMEM;
+ }
+
+ for (i = 0, j = 0; i < host->nr_boot_partitions; i++, j += 2) {
+ boot_partition = &host->boot_partitions[i];
+
+ ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j,
+ &boot_partition->page_offset);
+ if (ret) {
+ dev_err(dev, "Error parsing boot partition offset at index %d\n", i);
+ host->nr_boot_partitions = 0;
+ return ret;
+ }
+
+ if (boot_partition->page_offset % mtd->writesize) {
+ dev_err(dev, "Boot partition offset not multiple of writesize at index %i\n",
+ i);
+ host->nr_boot_partitions = 0;
+ return -EINVAL;
+ }
+ /* Convert offset to nand pages */
+ boot_partition->page_offset /= mtd->writesize;
+
+ ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j + 1,
+ &boot_partition->page_size);
+ if (ret) {
+ dev_err(dev, "Error parsing boot partition size at index %d\n", i);
+ host->nr_boot_partitions = 0;
+ return ret;
+ }
+
+ if (boot_partition->page_size % mtd->writesize) {
+ dev_err(dev, "Boot partition size not multiple of writesize at index %i\n",
+ i);
+ host->nr_boot_partitions = 0;
+ return -EINVAL;
+ }
+ /* Convert size to nand pages */
+ boot_partition->page_size /= mtd->writesize;
+ }
+
+ return 0;
+}
+
static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
struct qcom_nand_host *host,
struct device_node *dn)
@@ -2972,6 +3169,14 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
if (ret)
nand_cleanup(chip);
+ if (nandc->props->use_codeword_fixup) {
+ ret = qcom_nand_host_parse_boot_partitions(nandc, host, dn);
+ if (ret) {
+ nand_cleanup(chip);
+ return ret;
+ }
+ }
+
return ret;
}
@@ -3137,6 +3342,7 @@ static int qcom_nandc_remove(struct platform_device *pdev)
static const struct qcom_nandc_props ipq806x_nandc_props = {
.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
.is_bam = false,
+ .use_codeword_fixup = true,
.dev_cmd_reg_start = 0x0,
};
diff --git a/drivers/mtd/nand/raw/sm_common.c b/drivers/mtd/nand/raw/sm_common.c
index ba24cb36d0b9..b2b42dd1a2de 100644
--- a/drivers/mtd/nand/raw/sm_common.c
+++ b/drivers/mtd/nand/raw/sm_common.c
@@ -52,7 +52,7 @@ static const struct mtd_ooblayout_ops oob_sm_ops = {
.free = oob_sm_ooblayout_free,
};
-/* NOTE: This layout is is not compatabable with SmartMedia, */
+/* NOTE: This layout is not compatabable with SmartMedia, */
/* because the 256 byte devices have page depenent oob layout */
/* However it does preserve the bad block markers */
/* If you use smftl, it will bypass this and work correctly */
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index b36e5260ae27..e12f9f580a15 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -1223,11 +1223,8 @@ static int tegra_nand_remove(struct platform_device *pdev)
struct tegra_nand_controller *ctrl = platform_get_drvdata(pdev);
struct nand_chip *chip = ctrl->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
- int ret;
- ret = mtd_device_unregister(mtd);
- if (ret)
- return ret;
+ WARN_ON(mtd_device_unregister(mtd));
nand_cleanup(chip);
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 80dabe6ff0f3..b520fe634041 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
+spinand-objs := core.o ato.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/ato.c b/drivers/mtd/nand/spi/ato.c
new file mode 100644
index 000000000000..82b377c06812
--- /dev/null
+++ b/drivers/mtd/nand/spi/ato.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Aidan MacDonald
+ *
+ * Author: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+
+#define SPINAND_MFR_ATO 0x9b
+
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+
+static int ato25d1ga_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 8;
+ region->length = 8;
+ return 0;
+}
+
+static int ato25d1ga_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ if (section) {
+ region->offset = (16 * section);
+ region->length = 8;
+ } else {
+ /* first byte of section 0 is reserved for the BBM */
+ region->offset = 1;
+ region->length = 7;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops ato25d1ga_ooblayout = {
+ .ecc = ato25d1ga_ooblayout_ecc,
+ .free = ato25d1ga_ooblayout_free,
+};
+
+
+static const struct spinand_info ato_spinand_table[] = {
+ SPINAND_INFO("ATO25D1GA",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x12),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&ato25d1ga_ooblayout, NULL)),
+};
+
+static const struct spinand_manufacturer_ops ato_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer ato_spinand_manufacturer = {
+ .id = SPINAND_MFR_ATO,
+ .name = "ATO",
+ .chips = ato_spinand_table,
+ .nchips = ARRAY_SIZE(ato_spinand_table),
+ .ops = &ato_spinand_manuf_ops,
+};
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index d5b685d1605e..9d73910a7ae8 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -927,6 +927,7 @@ static const struct nand_ops spinand_ops = {
};
static const struct spinand_manufacturer *spinand_manufacturers[] = {
+ &ato_spinand_manufacturer,
&gigadevice_spinand_manufacturer,
&macronix_spinand_manufacturer,
&micron_spinand_manufacturer,
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index 23763d16e4f9..b43df73927a0 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -186,3 +186,12 @@ config MTD_QCOMSMEM_PARTS
help
This provides support for parsing partitions from Shared Memory (SMEM)
for NAND and SPI flash on Qualcomm platforms.
+
+config MTD_SERCOMM_PARTS
+ tristate "Sercomm partition table parser"
+ depends on MTD && RALINK
+ help
+ This provides partitions table parser for devices with Sercomm
+ partition map. This partition table contains real partition
+ offsets, which may differ from device to device depending on the
+ number and location of bad blocks on NAND.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index 2e98aa048278..2fcf0ab9e7da 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
+obj-$(CONFIG_MTD_SERCOMM_PARTS) += scpart.o
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o
diff --git a/drivers/mtd/parsers/ofpart_bcm4908.c b/drivers/mtd/parsers/ofpart_bcm4908.c
index 0eddef4c198e..bb072a0940e4 100644
--- a/drivers/mtd/parsers/ofpart_bcm4908.c
+++ b/drivers/mtd/parsers/ofpart_bcm4908.c
@@ -35,12 +35,15 @@ static long long bcm4908_partitions_fw_offset(void)
err = kstrtoul(s + len + 1, 0, &offset);
if (err) {
pr_err("failed to parse %s\n", s + len + 1);
+ of_node_put(root);
return err;
}
+ of_node_put(root);
return offset << 10;
}
+ of_node_put(root);
return -ENOENT;
}
diff --git a/drivers/mtd/parsers/redboot.c b/drivers/mtd/parsers/redboot.c
index feb44a573d44..a16b42a88581 100644
--- a/drivers/mtd/parsers/redboot.c
+++ b/drivers/mtd/parsers/redboot.c
@@ -58,6 +58,7 @@ static void parse_redboot_of(struct mtd_info *master)
return;
ret = of_property_read_u32(npart, "fis-index-block", &dirblock);
+ of_node_put(npart);
if (ret)
return;
diff --git a/drivers/mtd/parsers/scpart.c b/drivers/mtd/parsers/scpart.c
new file mode 100644
index 000000000000..02601bb33de4
--- /dev/null
+++ b/drivers/mtd/parsers/scpart.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/mtd/scpart.c: Sercomm Partition Parser
+ *
+ * Copyright (C) 2018 NOGUCHI Hiroshi
+ * Copyright (C) 2022 Mikhail Zhilkin
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/module.h>
+
+#define MOD_NAME "scpart"
+
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+
+#define pr_fmt(fmt) MOD_NAME ": " fmt
+
+#define ID_ALREADY_FOUND 0xffffffffUL
+
+#define MAP_OFFS_IN_BLK 0x800
+#define MAP_MIRROR_NUM 2
+
+static const char sc_part_magic[] = {
+ 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
+};
+#define PART_MAGIC_LEN sizeof(sc_part_magic)
+
+/* assumes that all fields are set by CPU native endian */
+struct sc_part_desc {
+ uint32_t part_id;
+ uint32_t part_offs;
+ uint32_t part_bytes;
+};
+
+static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc)
+{
+ return ((pdesc->part_id != 0xffffffffUL) &&
+ (pdesc->part_offs != 0xffffffffUL) &&
+ (pdesc->part_bytes != 0xffffffffUL));
+}
+
+static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
+ struct sc_part_desc **ppdesc)
+{
+ int cnt = 0;
+ int res = 0;
+ int res2;
+ loff_t offs;
+ size_t retlen;
+ struct sc_part_desc *pdesc = NULL;
+ struct sc_part_desc *tmpdesc;
+ uint8_t *buf;
+
+ buf = kzalloc(master->erasesize, GFP_KERNEL);
+ if (!buf) {
+ res = -ENOMEM;
+ goto out;
+ }
+
+ res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
+ if (res2 || retlen != master->erasesize) {
+ res = -EIO;
+ goto free;
+ }
+
+ for (offs = MAP_OFFS_IN_BLK;
+ offs < master->erasesize - sizeof(*tmpdesc);
+ offs += sizeof(*tmpdesc)) {
+ tmpdesc = (struct sc_part_desc *)&buf[offs];
+ if (!scpart_desc_is_valid(tmpdesc))
+ break;
+ cnt++;
+ }
+
+ if (cnt > 0) {
+ int bytes = cnt * sizeof(*pdesc);
+
+ pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
+ if (!pdesc) {
+ res = -ENOMEM;
+ goto free;
+ }
+ memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
+
+ *ppdesc = pdesc;
+ res = cnt;
+ }
+
+free:
+ kfree(buf);
+
+out:
+ return res;
+}
+
+static int scpart_find_partmap(struct mtd_info *master,
+ struct sc_part_desc **ppdesc)
+{
+ int magic_found = 0;
+ int res = 0;
+ int res2;
+ loff_t offs = 0;
+ size_t retlen;
+ uint8_t rdbuf[PART_MAGIC_LEN];
+
+ while ((magic_found < MAP_MIRROR_NUM) &&
+ (offs < master->size) &&
+ !mtd_block_isbad(master, offs)) {
+ res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
+ if (res2 || retlen != PART_MAGIC_LEN) {
+ res = -EIO;
+ goto out;
+ }
+ if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
+ pr_debug("Signature found at 0x%llx\n", offs);
+ magic_found++;
+ res = scpart_scan_partmap(master, offs, ppdesc);
+ if (res > 0)
+ goto out;
+ }
+ offs += master->erasesize;
+ }
+
+out:
+ if (res > 0)
+ pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
+ else
+ pr_info("No valid 'SC PART MAP' was found\n");
+
+ return res;
+}
+
+static int scpart_parse(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ const char *partname;
+ int n;
+ int nr_scparts;
+ int nr_parts = 0;
+ int res = 0;
+ struct sc_part_desc *scpart_map = NULL;
+ struct mtd_partition *parts = NULL;
+ struct device_node *mtd_node;
+ struct device_node *ofpart_node;
+ struct device_node *pp;
+
+ mtd_node = mtd_get_of_node(master);
+ if (!mtd_node) {
+ res = -ENOENT;
+ goto out;
+ }
+
+ ofpart_node = of_get_child_by_name(mtd_node, "partitions");
+ if (!ofpart_node) {
+ pr_info("%s: 'partitions' subnode not found on %pOF.\n",
+ master->name, mtd_node);
+ res = -ENOENT;
+ goto out;
+ }
+
+ nr_scparts = scpart_find_partmap(master, &scpart_map);
+ if (nr_scparts <= 0) {
+ pr_info("No any partitions was found in 'SC PART MAP'.\n");
+ res = -ENOENT;
+ goto free;
+ }
+
+ parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
+ GFP_KERNEL);
+ if (!parts) {
+ res = -ENOMEM;
+ goto free;
+ }
+
+ for_each_child_of_node(ofpart_node, pp) {
+ u32 scpart_id;
+
+ if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
+ continue;
+
+ for (n = 0 ; n < nr_scparts ; n++)
+ if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
+ (scpart_id == scpart_map[n].part_id))
+ break;
+ if (n >= nr_scparts)
+ /* not match */
+ continue;
+
+ /* add the partition found in OF into MTD partition array */
+ parts[nr_parts].offset = scpart_map[n].part_offs;
+ parts[nr_parts].size = scpart_map[n].part_bytes;
+ parts[nr_parts].of_node = pp;
+
+ if (!of_property_read_string(pp, "label", &partname))
+ parts[nr_parts].name = partname;
+ if (of_property_read_bool(pp, "read-only"))
+ parts[nr_parts].mask_flags |= MTD_WRITEABLE;
+ if (of_property_read_bool(pp, "lock"))
+ parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
+
+ /* mark as 'done' */
+ scpart_map[n].part_id = ID_ALREADY_FOUND;
+
+ nr_parts++;
+ }
+
+ if (nr_parts > 0) {
+ *pparts = parts;
+ res = nr_parts;
+ } else
+ pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
+
+ of_node_put(pp);
+
+free:
+ of_node_put(ofpart_node);
+ kfree(scpart_map);
+ if (res <= 0)
+ kfree(parts);
+
+out:
+ return res;
+}
+
+static const struct of_device_id scpart_parser_of_match_table[] = {
+ { .compatible = "sercomm,sc-partitions" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
+
+static struct mtd_part_parser scpart_parser = {
+ .parse_fn = scpart_parse,
+ .name = "scpart",
+ .of_match_table = scpart_parser_of_match_table,
+};
+module_mtd_part_parser(scpart_parser);
+
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("scpart");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
+MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>");
+MODULE_DESCRIPTION("Sercomm partition parser");
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 0cff2cda1b5a..7f955fade838 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -1111,9 +1111,9 @@ static void sm_release(struct mtd_blktrans_dev *dev)
{
struct sm_ftl *ftl = dev->priv;
- mutex_lock(&ftl->mutex);
del_timer_sync(&ftl->timer);
cancel_work_sync(&ftl->flush_work);
+ mutex_lock(&ftl->mutex);
sm_cache_flush(ftl);
mutex_unlock(&ftl->mutex);
}
diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
index 94a969185ceb..5070d72835ec 100644
--- a/drivers/mtd/spi-nor/controllers/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
@@ -237,7 +237,7 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
reg = readl(host->regbase + FMC_CFG);
reg &= ~(FMC_CFG_OP_MODE_MASK | SPI_NOR_ADDR_MODE_MASK);
reg |= FMC_CFG_OP_MODE_NORMAL;
- reg |= (nor->addr_width == 4) ? SPI_NOR_ADDR_MODE_4BYTES
+ reg |= (nor->addr_nbytes == 4) ? SPI_NOR_ADDR_MODE_4BYTES
: SPI_NOR_ADDR_MODE_3BYTES;
writel(reg, host->regbase + FMC_CFG);
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index 9032b9ab2eaf..ab3990e6ac25 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -203,7 +203,7 @@ static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
SPIFI_CMD_DATALEN(len) |
SPIFI_CMD_FIELDFORM_ALL_SERIAL |
SPIFI_CMD_OPCODE(nor->program_opcode) |
- SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+ SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
writel(cmd, spifi->io_base + SPIFI_CMD);
for (i = 0; i < len; i++)
@@ -230,7 +230,7 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
SPIFI_CMD_OPCODE(nor->erase_opcode) |
- SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+ SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
writel(cmd, spifi->io_base + SPIFI_CMD);
return nxp_spifi_wait_for_cmd(spifi);
@@ -252,12 +252,12 @@ static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
}
/* Memory mode supports address length between 1 and 4 */
- if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
+ if (spifi->nor.addr_nbytes < 1 || spifi->nor.addr_nbytes > 4)
return -EINVAL;
spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
- SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+ SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
return 0;
}
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 502967c76c5f..f2c64006f8d7 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -38,7 +38,7 @@
*/
#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ)
-#define SPI_NOR_MAX_ADDR_WIDTH 4
+#define SPI_NOR_MAX_ADDR_NBYTES 4
#define SPI_NOR_SRST_SLEEP_MIN 200
#define SPI_NOR_SRST_SLEEP_MAX 400
@@ -177,7 +177,7 @@ int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode,
static int spi_nor_controller_ops_erase(struct spi_nor *nor, loff_t offs)
{
- if (spi_nor_protocol_is_dtr(nor->write_proto))
+ if (spi_nor_protocol_is_dtr(nor->reg_proto))
return -EOPNOTSUPP;
return nor->controller_ops->erase(nor, offs);
@@ -198,7 +198,7 @@ static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
{
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
- SPI_MEM_OP_ADDR(nor->addr_width, from, 0),
+ SPI_MEM_OP_ADDR(nor->addr_nbytes, from, 0),
SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
SPI_MEM_OP_DATA_IN(len, buf, 0));
bool usebouncebuf;
@@ -262,7 +262,7 @@ static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
{
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
- SPI_MEM_OP_ADDR(nor->addr_width, to, 0),
+ SPI_MEM_OP_ADDR(nor->addr_nbytes, to, 0),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(len, buf, 0));
ssize_t nbytes;
@@ -972,7 +972,7 @@ static int spi_nor_erase_chip(struct spi_nor *nor)
if (nor->spimem) {
struct spi_mem_op op = SPI_NOR_CHIP_ERASE_OP;
- spi_nor_spimem_setup_op(nor, &op, nor->write_proto);
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
ret = spi_mem_exec_op(nor->spimem, &op);
} else {
@@ -1113,9 +1113,9 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
if (nor->spimem) {
struct spi_mem_op op =
SPI_NOR_SECTOR_ERASE_OP(nor->erase_opcode,
- nor->addr_width, addr);
+ nor->addr_nbytes, addr);
- spi_nor_spimem_setup_op(nor, &op, nor->write_proto);
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
return spi_mem_exec_op(nor->spimem, &op);
} else if (nor->controller_ops->erase) {
@@ -1126,13 +1126,13 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
* Default implementation, if driver doesn't have a specialized HW
* control
*/
- for (i = nor->addr_width - 1; i >= 0; i--) {
+ for (i = nor->addr_nbytes - 1; i >= 0; i--) {
nor->bouncebuf[i] = addr & 0xff;
addr >>= 8;
}
return spi_nor_controller_ops_write_reg(nor, nor->erase_opcode,
- nor->bouncebuf, nor->addr_width);
+ nor->bouncebuf, nor->addr_nbytes);
}
/**
@@ -2249,43 +2249,43 @@ static int spi_nor_default_setup(struct spi_nor *nor,
return 0;
}
-static int spi_nor_set_addr_width(struct spi_nor *nor)
+static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
{
- if (nor->addr_width) {
- /* already configured from SFDP */
+ if (nor->params->addr_nbytes) {
+ nor->addr_nbytes = nor->params->addr_nbytes;
} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
/*
* In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
- * in this protocol an odd address width cannot be used because
+ * in this protocol an odd addr_nbytes cannot be used because
* then the address phase would only span a cycle and a half.
* Half a cycle would be left over. We would then have to start
* the dummy phase in the middle of a cycle and so too the data
* phase, and we will end the transaction with half a cycle left
* over.
*
- * Force all 8D-8D-8D flashes to use an address width of 4 to
+ * Force all 8D-8D-8D flashes to use an addr_nbytes of 4 to
* avoid this situation.
*/
- nor->addr_width = 4;
- } else if (nor->info->addr_width) {
- nor->addr_width = nor->info->addr_width;
+ nor->addr_nbytes = 4;
+ } else if (nor->info->addr_nbytes) {
+ nor->addr_nbytes = nor->info->addr_nbytes;
} else {
- nor->addr_width = 3;
+ nor->addr_nbytes = 3;
}
- if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
+ if (nor->addr_nbytes == 3 && nor->params->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
+ nor->addr_nbytes = 4;
}
- if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
- dev_dbg(nor->dev, "address width is too large: %u\n",
- nor->addr_width);
+ if (nor->addr_nbytes > SPI_NOR_MAX_ADDR_NBYTES) {
+ dev_dbg(nor->dev, "The number of address bytes is too large: %u\n",
+ nor->addr_nbytes);
return -EINVAL;
}
/* Set 4byte opcodes when possible. */
- if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+ if (nor->addr_nbytes == 4 && nor->flags & SNOR_F_4B_OPCODES &&
!(nor->flags & SNOR_F_HAS_4BAIT))
spi_nor_set_4byte_opcodes(nor);
@@ -2304,7 +2304,7 @@ static int spi_nor_setup(struct spi_nor *nor,
if (ret)
return ret;
- return spi_nor_set_addr_width(nor);
+ return spi_nor_set_addr_nbytes(nor);
}
/**
@@ -2382,12 +2382,7 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
*/
erase_mask = 0;
i = 0;
- if (no_sfdp_flags & SECT_4K_PMC) {
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], 4096u,
- SPINOR_OP_BE_4K_PMC);
- i++;
- } else if (no_sfdp_flags & SECT_4K) {
+ if (no_sfdp_flags & SECT_4K) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K);
@@ -2497,7 +2492,6 @@ static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
if (spi_nor_parse_sfdp(nor)) {
memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
- nor->addr_width = 0;
nor->flags &= ~SNOR_F_4B_OPCODES;
}
}
@@ -2718,7 +2712,7 @@ static int spi_nor_init(struct spi_nor *nor)
nor->flags & SNOR_F_SWP_IS_VOLATILE))
spi_nor_try_unlock_all(nor);
- if (nor->addr_width == 4 &&
+ if (nor->addr_nbytes == 4 &&
nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
!(nor->flags & SNOR_F_4B_OPCODES)) {
/*
@@ -2730,7 +2724,7 @@ static int spi_nor_init(struct spi_nor *nor)
*/
WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
"enabling reset hack; may not recover from unexpected reboots\n");
- nor->params->set_4byte_addr_mode(nor, true);
+ return nor->params->set_4byte_addr_mode(nor, true);
}
return 0;
@@ -2845,7 +2839,7 @@ static void spi_nor_put_device(struct mtd_info *mtd)
void spi_nor_restore(struct spi_nor *nor)
{
/* restore the addressing mode */
- if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
+ if (nor->addr_nbytes == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
nor->flags & SNOR_F_BROKEN_RESET)
nor->params->set_4byte_addr_mode(nor, false);
@@ -2989,7 +2983,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* - select op codes for (Fast) Read, Page Program and Sector Erase.
* - set the number of dummy cycles (mode cycles + wait states).
* - set the SPI protocols for register and memory accesses.
- * - set the address width.
+ * - set the number of address bytes.
*/
ret = spi_nor_setup(nor, hwcaps);
if (ret)
@@ -3030,7 +3024,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
{
struct spi_mem_dirmap_info info = {
.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
- SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
+ SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
SPI_MEM_OP_DATA_IN(0, NULL, 0)),
.offset = 0,
@@ -3061,7 +3055,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
{
struct spi_mem_dirmap_info info = {
.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
- SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
+ SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
.offset = 0,
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 3f841ec36e56..85b0cf254e97 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -84,9 +84,9 @@
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
-#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_width, addr) \
+#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr) \
SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \
- SPI_MEM_OP_ADDR(addr_width, addr, 0), \
+ SPI_MEM_OP_ADDR(addr_nbytes, addr, 0), \
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
@@ -340,6 +340,11 @@ struct spi_nor_otp {
* @writesize Minimal writable flash unit size. Defaults to 1. Set to
* ECC unit size for ECC-ed flashes.
* @page_size: the page size of the SPI NOR flash memory.
+ * @addr_nbytes: number of address bytes to send.
+ * @addr_mode_nbytes: number of address bytes of current address mode. Useful
+ * when the flash operates with 4B opcodes but needs the
+ * internal address mode for opcodes that don't have a 4B
+ * opcode correspondent.
* @rdsr_dummy: dummy cycles needed for Read Status Register command
* in octal DTR mode.
* @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register
@@ -372,6 +377,8 @@ struct spi_nor_flash_parameter {
u64 size;
u32 writesize;
u32 page_size;
+ u8 addr_nbytes;
+ u8 addr_mode_nbytes;
u8 rdsr_dummy;
u8 rdsr_addr_nbytes;
@@ -429,7 +436,7 @@ struct spi_nor_fixups {
* isn't necessarily called a "sector" by the vendor.
* @n_sectors: the number of sectors.
* @page_size: the flash's page size.
- * @addr_width: the flash's address width.
+ * @addr_nbytes: number of address bytes to send.
*
* @parse_sfdp: true when flash supports SFDP tables. The false value has no
* meaning. If one wants to skip the SFDP tables, one should
@@ -457,7 +464,6 @@ struct spi_nor_fixups {
* flags are used together with the SPI_NOR_SKIP_SFDP flag.
* SPI_NOR_SKIP_SFDP: skip parsing of SFDP tables.
* SECT_4K: SPINOR_OP_BE_4K works uniformly.
- * SECT_4K_PMC: SPINOR_OP_BE_4K_PMC works uniformly.
* SPI_NOR_DUAL_READ: flash supports Dual Read.
* SPI_NOR_QUAD_READ: flash supports Quad Read.
* SPI_NOR_OCTAL_READ: flash supports Octal Read.
@@ -488,7 +494,7 @@ struct flash_info {
unsigned sector_size;
u16 n_sectors;
u16 page_size;
- u16 addr_width;
+ u8 addr_nbytes;
bool parse_sfdp;
u16 flags;
@@ -505,7 +511,6 @@ struct flash_info {
u8 no_sfdp_flags;
#define SPI_NOR_SKIP_SFDP BIT(0)
#define SECT_4K BIT(1)
-#define SECT_4K_PMC BIT(2)
#define SPI_NOR_DUAL_READ BIT(3)
#define SPI_NOR_QUAD_READ BIT(4)
#define SPI_NOR_OCTAL_READ BIT(5)
@@ -550,11 +555,11 @@ struct flash_info {
.n_sectors = (_n_sectors), \
.page_size = 256, \
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width) \
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes) \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
- .addr_width = (_addr_width), \
+ .addr_nbytes = (_addr_nbytes), \
.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR, \
#define OTP_INFO(_len, _n_regions, _base, _offset) \
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index eaf84f7a0676..df76cb5de3f9 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -86,7 +86,7 @@ static int spi_nor_params_show(struct seq_file *s, void *data)
seq_printf(s, "size\t\t%s\n", buf);
seq_printf(s, "write size\t%u\n", params->writesize);
seq_printf(s, "page size\t%u\n", params->page_size);
- seq_printf(s, "address width\t%u\n", nor->addr_width);
+ seq_printf(s, "address nbytes\t%u\n", nor->addr_nbytes);
seq_puts(s, "flags\t\t");
spi_nor_print_flags(s, nor->flags, snor_f_names, sizeof(snor_f_names));
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index 79e2408f4998..fcc3b0e7cda9 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -13,7 +13,7 @@ static const struct flash_info esmt_nor_parts[] = {
{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
NO_SFDP_FLAGS(SECT_4K) },
- { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64)
+ { "f25l32qa-2s", INFO(0x8c4116, 0, 64 * 1024, 64)
FLAGS(SPI_NOR_HAS_LOCK)
NO_SFDP_FLAGS(SECT_4K) },
{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128)
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index c012bc2486e1..89a66a19d754 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -14,13 +14,13 @@ is25lp256_post_bfpt_fixups(struct spi_nor *nor,
const struct sfdp_bfpt *bfpt)
{
/*
- * IS25LP256 supports 4B opcodes, but the BFPT advertises a
- * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width.
- * Overwrite the address width advertised by the BFPT.
+ * IS25LP256 supports 4B opcodes, but the BFPT advertises
+ * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY.
+ * Overwrite the number of address bytes advertised by the BFPT.
*/
if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
- nor->addr_width = 4;
+ nor->params->addr_nbytes = 4;
return 0;
}
@@ -29,6 +29,21 @@ static const struct spi_nor_fixups is25lp256_fixups = {
.post_bfpt = is25lp256_post_bfpt_fixups,
};
+static void pm25lv_nor_late_init(struct spi_nor *nor)
+{
+ struct spi_nor_erase_map *map = &nor->params->erase_map;
+ int i;
+
+ /* The PM25LV series has a different 4k sector erase opcode */
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+ if (map->erase_type[i].size == 4096)
+ map->erase_type[i].opcode = SPINOR_OP_BE_4K_PMC;
+}
+
+static const struct spi_nor_fixups pm25lv_nor_fixups = {
+ .late_init = pm25lv_nor_late_init,
+};
+
static const struct flash_info issi_nor_parts[] = {
/* ISSI */
{ "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2)
@@ -62,9 +77,13 @@ static const struct flash_info issi_nor_parts[] = {
/* PMC */
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2)
- NO_SFDP_FLAGS(SECT_4K_PMC) },
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &pm25lv_nor_fixups
+ },
{ "pm25lv010", INFO(0, 0, 32 * 1024, 4)
- NO_SFDP_FLAGS(SECT_4K_PMC) },
+ NO_SFDP_FLAGS(SECT_4K)
+ .fixups = &pm25lv_nor_fixups
+ },
{ "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64)
NO_SFDP_FLAGS(SECT_4K) },
};
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index a96f74e0f568..3c9681a3f7a3 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -399,8 +399,16 @@ static int micron_st_nor_ready(struct spi_nor *nor)
return sr_ready;
ret = micron_st_nor_read_fsr(nor, nor->bouncebuf);
- if (ret)
- return ret;
+ if (ret) {
+ /*
+ * Some controllers, such as Intel SPI, do not support low
+ * level operations such as reading the flag status
+ * register. They only expose small amount of high level
+ * operations to the software. If this is the case we use
+ * only the status register value.
+ */
+ return ret == -EOPNOTSUPP ? sr_ready : ret;
+ }
if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
if (nor->bouncebuf[0] & FSR_E_ERR)
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
index fa63d8571218..00ab0d2d6d2f 100644
--- a/drivers/mtd/spi-nor/otp.c
+++ b/drivers/mtd/spi-nor/otp.c
@@ -35,13 +35,13 @@
*/
int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
{
- u8 addr_width, read_opcode, read_dummy;
+ u8 addr_nbytes, read_opcode, read_dummy;
struct spi_mem_dirmap_desc *rdesc;
enum spi_nor_protocol read_proto;
int ret;
read_opcode = nor->read_opcode;
- addr_width = nor->addr_width;
+ addr_nbytes = nor->addr_nbytes;
read_dummy = nor->read_dummy;
read_proto = nor->read_proto;
rdesc = nor->dirmap.rdesc;
@@ -54,7 +54,7 @@ int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
ret = spi_nor_read_data(nor, addr, len, buf);
nor->read_opcode = read_opcode;
- nor->addr_width = addr_width;
+ nor->addr_nbytes = addr_nbytes;
nor->read_dummy = read_dummy;
nor->read_proto = read_proto;
nor->dirmap.rdesc = rdesc;
@@ -85,11 +85,11 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
{
enum spi_nor_protocol write_proto;
struct spi_mem_dirmap_desc *wdesc;
- u8 addr_width, program_opcode;
+ u8 addr_nbytes, program_opcode;
int ret, written;
program_opcode = nor->program_opcode;
- addr_width = nor->addr_width;
+ addr_nbytes = nor->addr_nbytes;
write_proto = nor->write_proto;
wdesc = nor->dirmap.wdesc;
@@ -113,7 +113,7 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
out:
nor->program_opcode = program_opcode;
- nor->addr_width = addr_width;
+ nor->addr_nbytes = addr_nbytes;
nor->write_proto = write_proto;
nor->dirmap.wdesc = wdesc;
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index a5211543d30d..2257f1b4c2e2 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -134,7 +134,7 @@ struct sfdp_4bait {
/**
* spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
- * addr_width and read_dummy members of the struct spi_nor
+ * addr_nbytes and read_dummy members of the struct spi_nor
* should be previously
* set.
* @nor: pointer to a 'struct spi_nor'
@@ -178,21 +178,21 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
size_t len, void *buf)
{
- u8 addr_width, read_opcode, read_dummy;
+ u8 addr_nbytes, read_opcode, read_dummy;
int ret;
read_opcode = nor->read_opcode;
- addr_width = nor->addr_width;
+ addr_nbytes = nor->addr_nbytes;
read_dummy = nor->read_dummy;
nor->read_opcode = SPINOR_OP_RDSFDP;
- nor->addr_width = 3;
+ nor->addr_nbytes = 3;
nor->read_dummy = 8;
ret = spi_nor_read_raw(nor, addr, len, buf);
nor->read_opcode = read_opcode;
- nor->addr_width = addr_width;
+ nor->addr_nbytes = addr_nbytes;
nor->read_dummy = read_dummy;
return ret;
@@ -462,11 +462,13 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4:
- nor->addr_width = 3;
+ params->addr_nbytes = 3;
+ params->addr_mode_nbytes = 3;
break;
case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
- nor->addr_width = 4;
+ params->addr_nbytes = 4;
+ params->addr_mode_nbytes = 4;
break;
default:
@@ -637,12 +639,12 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
}
/**
- * spi_nor_smpt_addr_width() - return the address width used in the
+ * spi_nor_smpt_addr_nbytes() - return the number of address bytes used in the
* configuration detection command.
* @nor: pointer to a 'struct spi_nor'
* @settings: configuration detection command descriptor, dword1
*/
-static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
+static u8 spi_nor_smpt_addr_nbytes(const struct spi_nor *nor, const u32 settings)
{
switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
case SMPT_CMD_ADDRESS_LEN_0:
@@ -653,7 +655,7 @@ static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
return 4;
case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
default:
- return nor->addr_width;
+ return nor->params->addr_mode_nbytes;
}
}
@@ -690,7 +692,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
u32 addr;
int err;
u8 i;
- u8 addr_width, read_opcode, read_dummy;
+ u8 addr_nbytes, read_opcode, read_dummy;
u8 read_data_mask, map_id;
/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
@@ -698,7 +700,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
if (!buf)
return ERR_PTR(-ENOMEM);
- addr_width = nor->addr_width;
+ addr_nbytes = nor->addr_nbytes;
read_dummy = nor->read_dummy;
read_opcode = nor->read_opcode;
@@ -709,7 +711,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
break;
read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
- nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
+ nor->addr_nbytes = spi_nor_smpt_addr_nbytes(nor, smpt[i]);
nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
addr = smpt[i + 1];
@@ -756,7 +758,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
/* fall through */
out:
kfree(buf);
- nor->addr_width = addr_width;
+ nor->addr_nbytes = addr_nbytes;
nor->read_dummy = read_dummy;
nor->read_opcode = read_opcode;
return ret;
@@ -1044,7 +1046,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
/*
* We need at least one 4-byte op code per read, program and erase
* operation; the .read(), .write() and .erase() hooks share the
- * nor->addr_width value.
+ * nor->addr_nbytes value.
*/
if (!read_hwcaps || !pp_hwcaps || !erase_mask)
goto out;
@@ -1098,7 +1100,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
* Spansion memory. However this quirk is no longer needed with new
* SFDP compliant memories.
*/
- nor->addr_width = 4;
+ params->addr_nbytes = 4;
nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
/* fall through */
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 43cd6cd92537..0150049007be 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -14,6 +14,8 @@
#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */
#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */
#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */
+#define SPINOR_REG_CYPRESS_CFR1V 0x00800002
+#define SPINOR_REG_CYPRESS_CFR1V_QUAD_EN BIT(1) /* Quad Enable */
#define SPINOR_REG_CYPRESS_CFR2V 0x00800003
#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24 0xb
#define SPINOR_REG_CYPRESS_CFR3V 0x00800004
@@ -114,6 +116,150 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
}
/**
+ * cypress_nor_quad_enable_volatile() - enable Quad I/O mode in volatile
+ * register.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * It is recommended to update volatile registers in the field application due
+ * to a risk of the non-volatile registers corruption by power interrupt. This
+ * function sets Quad Enable bit in CFR1 volatile. If users set the Quad Enable
+ * bit in the CFR1 non-volatile in advance (typically by a Flash programmer
+ * before mounting Flash on PCB), the Quad Enable bit in the CFR1 volatile is
+ * also set during Flash power-up.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
+{
+ struct spi_mem_op op;
+ u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
+ u8 cfr1v_written;
+ int ret;
+
+ op = (struct spi_mem_op)
+ CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
+ SPINOR_REG_CYPRESS_CFR1V,
+ nor->bouncebuf);
+
+ ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1V_QUAD_EN)
+ return 0;
+
+ /* Update the Quad Enable bit. */
+ nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1V_QUAD_EN;
+ op = (struct spi_mem_op)
+ CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
+ SPINOR_REG_CYPRESS_CFR1V, 1,
+ nor->bouncebuf);
+ ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+ if (ret)
+ return ret;
+
+ cfr1v_written = nor->bouncebuf[0];
+
+ /* Read back and check it. */
+ op = (struct spi_mem_op)
+ CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
+ SPINOR_REG_CYPRESS_CFR1V,
+ nor->bouncebuf);
+ ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] != cfr1v_written) {
+ dev_err(nor->dev, "CFR1: Read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * cypress_nor_set_page_size() - Set page size which corresponds to the flash
+ * configuration.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * The BFPT table advertises a 512B or 256B page size depending on part but the
+ * page size is actually configurable (with the default being 256B). Read from
+ * CFR3V[4] and set the correct size.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_set_page_size(struct spi_nor *nor)
+{
+ struct spi_mem_op op =
+ CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V,
+ nor->bouncebuf);
+ int ret;
+
+ ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
+ nor->params->page_size = 512;
+ else
+ nor->params->page_size = 256;
+
+ return 0;
+}
+
+static int
+s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt)
+{
+ /* Replace Quad Enable with volatile version */
+ nor->params->quad_enable = cypress_nor_quad_enable_volatile;
+
+ return cypress_nor_set_page_size(nor);
+}
+
+static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
+{
+ struct spi_nor_erase_type *erase_type =
+ nor->params->erase_map.erase_type;
+ unsigned int i;
+
+ /*
+ * In some parts, 3byte erase opcodes are advertised by 4BAIT.
+ * Convert them to 4byte erase opcodes.
+ */
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ switch (erase_type[i].opcode) {
+ case SPINOR_OP_SE:
+ erase_type[i].opcode = SPINOR_OP_SE_4B;
+ break;
+ case SPINOR_OP_BE_4K:
+ erase_type[i].opcode = SPINOR_OP_BE_4K_4B;
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void s25hx_t_late_init(struct spi_nor *nor)
+{
+ struct spi_nor_flash_parameter *params = nor->params;
+
+ /* Fast Read 4B requires mode cycles */
+ params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
+
+ /* The writesize should be ECC data unit size */
+ params->writesize = 16;
+}
+
+static struct spi_nor_fixups s25hx_t_fixups = {
+ .post_bfpt = s25hx_t_post_bfpt_fixup,
+ .post_sfdp = s25hx_t_post_sfdp_fixup,
+ .late_init = s25hx_t_late_init,
+};
+
+/**
* cypress_nor_octal_dtr_enable() - Enable octal DTR on Cypress flashes.
* @nor: pointer to a 'struct spi_nor'
* @enable: whether to enable or disable Octal DTR
@@ -167,28 +313,7 @@ static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
const struct sfdp_bfpt *bfpt)
{
- /*
- * The BFPT table advertises a 512B page size but the page size is
- * actually configurable (with the default being 256B). Read from
- * CFR3V[4] and set the correct size.
- */
- struct spi_mem_op op =
- CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V,
- nor->bouncebuf);
- int ret;
-
- spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- if (ret)
- return ret;
-
- if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
- nor->params->page_size = 512;
- else
- nor->params->page_size = 256;
-
- return 0;
+ return cypress_nor_set_page_size(nor);
}
static const struct spi_nor_fixups s28hs512t_fixups = {
@@ -310,6 +435,22 @@ static const struct flash_info spansion_nor_parts[] = {
{ "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+ { "s25hl512t", INFO6(0x342a1a, 0x0f0390, 256 * 1024, 256)
+ PARSE_SFDP
+ MFR_FLAGS(USE_CLSR)
+ .fixups = &s25hx_t_fixups },
+ { "s25hl01gt", INFO6(0x342a1b, 0x0f0390, 256 * 1024, 512)
+ PARSE_SFDP
+ MFR_FLAGS(USE_CLSR)
+ .fixups = &s25hx_t_fixups },
+ { "s25hs512t", INFO6(0x342b1a, 0x0f0390, 256 * 1024, 256)
+ PARSE_SFDP
+ MFR_FLAGS(USE_CLSR)
+ .fixups = &s25hx_t_fixups },
+ { "s25hs01gt", INFO6(0x342b1b, 0x0f0390, 256 * 1024, 512)
+ PARSE_SFDP
+ MFR_FLAGS(USE_CLSR)
+ .fixups = &s25hx_t_fixups },
{ "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
FLAGS(SPI_NOR_NO_ERASE) },
{ "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256)
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 1d2f5db047bd..5723157739fc 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -31,7 +31,7 @@
.sector_size = (8 * (_page_size)), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
- .addr_width = 3, \
+ .addr_nbytes = 3, \
.flags = SPI_NOR_NO_FR
/* Xilinx S3AN share MFR with Atmel SPI NOR */
diff --git a/include/linux/mtd/hyperbus.h b/include/linux/mtd/hyperbus.h
index 0ce612428aea..bb6b7121a542 100644
--- a/include/linux/mtd/hyperbus.h
+++ b/include/linux/mtd/hyperbus.h
@@ -89,9 +89,7 @@ int hyperbus_register_device(struct hyperbus_device *hbdev);
/**
* hyperbus_unregister_device - deregister HyperBus slave memory device
* @hbdev: hyperbus_device to be unregistered
- *
- * Return: 0 for success, others for failure.
*/
-int hyperbus_unregister_device(struct hyperbus_device *hbdev);
+void hyperbus_unregister_device(struct hyperbus_device *hbdev);
#endif /* __LINUX_MTD_HYPERBUS_H__ */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 1ede4c89805a..42218a1164f6 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -351,7 +351,7 @@ struct spi_nor_flash_parameter;
* @bouncebuf_size: size of the bounce buffer
* @info: SPI NOR part JEDEC MFR ID and other info
* @manufacturer: SPI NOR manufacturer
- * @addr_width: number of address bytes
+ * @addr_nbytes: number of address bytes
* @erase_opcode: the opcode for erasing a sector
* @read_opcode: the read opcode
* @read_dummy: the dummy needed by the read operation
@@ -381,7 +381,7 @@ struct spi_nor {
size_t bouncebuf_size;
const struct flash_info *info;
const struct spi_nor_manufacturer *manufacturer;
- u8 addr_width;
+ u8 addr_nbytes;
u8 erase_opcode;
u8 read_opcode;
u8 read_dummy;
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 5584d3bb6556..6d3392a7edc6 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -260,6 +260,7 @@ struct spinand_manufacturer {
};
/* SPI NAND manufacturers */
+extern const struct spinand_manufacturer ato_spinand_manufacturer;
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
extern const struct spinand_manufacturer micron_spinand_manufacturer;
diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h
index b869990c2db2..890d9e5b76d7 100644
--- a/include/uapi/mtd/mtd-abi.h
+++ b/include/uapi/mtd/mtd-abi.h
@@ -69,8 +69,8 @@ enum {
* struct mtd_write_req - data structure for requesting a write operation
*
* @start: start address
- * @len: length of data buffer
- * @ooblen: length of OOB buffer
+ * @len: length of data buffer (only lower 32 bits are used)
+ * @ooblen: length of OOB buffer (only lower 32 bits are used)
* @usr_data: user-provided data buffer
* @usr_oob: user-provided OOB buffer
* @mode: MTD mode (see "MTD operation modes")