mmc: Add driver for LiteX's LiteSDCard interface

LiteX (https://github.com/enjoy-digital/litex) is a SoC framework
that targets FPGAs. LiteSDCard is a small footprint, configurable
SDCard core commonly used in LiteX designs.

The driver was first written in May 2020 and has been maintained
cooperatively by the LiteX community. Thanks to all contributors!

Co-developed-by: Kamil Rakoczy <krakoczy@antmicro.com>
Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
Co-developed-by: Maciej Dudek <mdudek@internships.antmicro.com>
Signed-off-by: Maciej Dudek <mdudek@internships.antmicro.com>
Co-developed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220113170300.3555651-4-gsomlo@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

3 files changed, 675 insertions, 0 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 52b0b27a6839..af6c3c329076 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -1094,3 +1094,16 @@ config MMC_OWL
 
 config MMC_SDHCI_EXTERNAL_DMA
 	bool
+
+config MMC_LITEX
+	tristate "LiteX MMC Host Controller support"
+	depends on ((PPC_MICROWATT || LITEX) && OF && HAVE_CLK) || COMPILE_TEST
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
+	help
+	  This selects support for the MMC Host Controller found in LiteX SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called litex_mmc.
+
+	  If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index ea36d379bd3c..4e4ceb32c4b4 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_MMC_CQHCI)			+= cqhci.o
 cqhci-y					+= cqhci-core.o
 cqhci-$(CONFIG_MMC_CRYPTO)		+= cqhci-crypto.o
 obj-$(CONFIG_MMC_HSQ)			+= mmc_hsq.o
+obj-$(CONFIG_MMC_LITEX)			+= litex_mmc.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
diff --git a/drivers/mmc/host/litex_mmc.c b/drivers/mmc/host/litex_mmc.c
new file mode 100644
index 000000000000..6ba0d63b8c07
--- /dev/null
+++ b/drivers/mmc/host/litex_mmc.c
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LiteX LiteSDCard driver
+ *
+ * Copyright (C) 2019-2020 Antmicro <contact@antmicro.com>
+ * Copyright (C) 2019-2020 Kamil Rakoczy <krakoczy@antmicro.com>
+ * Copyright (C) 2019-2020 Maciej Dudek <mdudek@internships.antmicro.com>
+ * Copyright (C) 2020 Paul Mackerras <paulus@ozlabs.org>
+ * Copyright (C) 2020-2022 Gabriel Somlo <gsomlo@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/litex.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+
+#define LITEX_PHY_CARDDETECT  0x00
+#define LITEX_PHY_CLOCKERDIV  0x04
+#define LITEX_PHY_INITIALIZE  0x08
+#define LITEX_PHY_WRITESTATUS 0x0C
+#define LITEX_CORE_CMDARG     0x00
+#define LITEX_CORE_CMDCMD     0x04
+#define LITEX_CORE_CMDSND     0x08
+#define LITEX_CORE_CMDRSP     0x0C
+#define LITEX_CORE_CMDEVT     0x1C
+#define LITEX_CORE_DATEVT     0x20
+#define LITEX_CORE_BLKLEN     0x24
+#define LITEX_CORE_BLKCNT     0x28
+#define LITEX_BLK2MEM_BASE    0x00
+#define LITEX_BLK2MEM_LEN     0x08
+#define LITEX_BLK2MEM_ENA     0x0C
+#define LITEX_BLK2MEM_DONE    0x10
+#define LITEX_BLK2MEM_LOOP    0x14
+#define LITEX_MEM2BLK_BASE    0x00
+#define LITEX_MEM2BLK_LEN     0x08
+#define LITEX_MEM2BLK_ENA     0x0C
+#define LITEX_MEM2BLK_DONE    0x10
+#define LITEX_MEM2BLK_LOOP    0x14
+#define LITEX_MEM2BLK         0x18
+#define LITEX_IRQ_STATUS      0x00
+#define LITEX_IRQ_PENDING     0x04
+#define LITEX_IRQ_ENABLE      0x08
+
+#define SD_CTL_DATA_XFER_NONE  0
+#define SD_CTL_DATA_XFER_READ  1
+#define SD_CTL_DATA_XFER_WRITE 2
+
+#define SD_CTL_RESP_NONE       0
+#define SD_CTL_RESP_SHORT      1
+#define SD_CTL_RESP_LONG       2
+#define SD_CTL_RESP_SHORT_BUSY 3
+
+#define SD_BIT_DONE    BIT(0)
+#define SD_BIT_WR_ERR  BIT(1)
+#define SD_BIT_TIMEOUT BIT(2)
+#define SD_BIT_CRC_ERR BIT(3)
+
+#define SD_SLEEP_US       5
+#define SD_TIMEOUT_US 20000
+
+#define SDIRQ_CARD_DETECT    1
+#define SDIRQ_SD_TO_MEM_DONE 2
+#define SDIRQ_MEM_TO_SD_DONE 4
+#define SDIRQ_CMD_DONE       8
+
+struct litex_mmc_host {
+	struct mmc_host *mmc;
+
+	void __iomem *sdphy;
+	void __iomem *sdcore;
+	void __iomem *sdreader;
+	void __iomem *sdwriter;
+	void __iomem *sdirq;
+
+	void *buffer;
+	size_t buf_size;
+	dma_addr_t dma;
+
+	struct completion cmd_done;
+	int irq;
+
+	unsigned int ref_clk;
+	unsigned int sd_clk;
+
+	u32 resp[4];
+	u16 rca;
+
+	bool is_bus_width_set;
+	bool app_cmd;
+};
+
+static int litex_mmc_sdcard_wait_done(void __iomem *reg, struct device *dev)
+{
+	u8 evt;
+	int ret;
+
+	ret = readx_poll_timeout(litex_read8, reg, evt, evt & SD_BIT_DONE,
+				 SD_SLEEP_US, SD_TIMEOUT_US);
+	if (ret)
+		return ret;
+	if (evt == SD_BIT_DONE)
+		return 0;
+	if (evt & SD_BIT_WR_ERR)
+		return -EIO;
+	if (evt & SD_BIT_TIMEOUT)
+		return -ETIMEDOUT;
+	if (evt & SD_BIT_CRC_ERR)
+		return -EILSEQ;
+	dev_err(dev, "%s: unknown error (evt=%x)\n", __func__, evt);
+	return -EINVAL;
+}
+
+static int litex_mmc_send_cmd(struct litex_mmc_host *host,
+			      u8 cmd, u32 arg, u8 response_len, u8 transfer)
+{
+	struct device *dev = mmc_dev(host->mmc);
+	void __iomem *reg;
+	int ret;
+	u8 evt;
+
+	litex_write32(host->sdcore + LITEX_CORE_CMDARG, arg);
+	litex_write32(host->sdcore + LITEX_CORE_CMDCMD,
+		      cmd << 8 | transfer << 5 | response_len);
+	litex_write8(host->sdcore + LITEX_CORE_CMDSND, 1);
+
+	/*
+	 * Wait for an interrupt if we have an interrupt and either there is
+	 * data to be transferred, or if the card can report busy via DAT0.
+	 */
+	if (host->irq > 0 &&
+	    (transfer != SD_CTL_DATA_XFER_NONE ||
+	     response_len == SD_CTL_RESP_SHORT_BUSY)) {
+		reinit_completion(&host->cmd_done);
+		litex_write32(host->sdirq + LITEX_IRQ_ENABLE,
+			      SDIRQ_CMD_DONE | SDIRQ_CARD_DETECT);
+		wait_for_completion(&host->cmd_done);
+	}
+
+	ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_CMDEVT, dev);
+	if (ret) {
+		dev_err(dev, "Command (cmd %d) error, status %d\n", cmd, ret);
+		return ret;
+	}
+
+	if (response_len != SD_CTL_RESP_NONE) {
+		/*
+		 * NOTE: this matches the semantics of litex_read32()
+		 * regardless of underlying arch endianness!
+		 */
+		memcpy_fromio(host->resp,
+			      host->sdcore + LITEX_CORE_CMDRSP, 0x10);
+	}
+
+	if (!host->app_cmd && cmd == SD_SEND_RELATIVE_ADDR)
+		host->rca = (host->resp[3] >> 16);
+
+	host->app_cmd = (cmd == MMC_APP_CMD);
+
+	if (transfer == SD_CTL_DATA_XFER_NONE)
+		return ret; /* OK from prior litex_mmc_sdcard_wait_done() */
+
+	ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_DATEVT, dev);
+	if (ret) {
+		dev_err(dev, "Data xfer (cmd %d) error, status %d\n", cmd, ret);
+		return ret;
+	}
+
+	/* Wait for completion of (read or write) DMA transfer */
+	reg = (transfer == SD_CTL_DATA_XFER_READ) ?
+		host->sdreader + LITEX_BLK2MEM_DONE :
+		host->sdwriter + LITEX_MEM2BLK_DONE;
+	ret = readx_poll_timeout(litex_read8, reg, evt, evt & SD_BIT_DONE,
+				 SD_SLEEP_US, SD_TIMEOUT_US);
+	if (ret)
+		dev_err(dev, "DMA timeout (cmd %d)\n", cmd);
+
+	return ret;
+}
+
+static int litex_mmc_send_app_cmd(struct litex_mmc_host *host)
+{
+	return litex_mmc_send_cmd(host, MMC_APP_CMD, host->rca << 16,
+				  SD_CTL_RESP_SHORT, SD_CTL_DATA_XFER_NONE);
+}
+
+static int litex_mmc_send_set_bus_w_cmd(struct litex_mmc_host *host, u32 width)
+{
+	return litex_mmc_send_cmd(host, SD_APP_SET_BUS_WIDTH, width,
+				  SD_CTL_RESP_SHORT, SD_CTL_DATA_XFER_NONE);
+}
+
+static int litex_mmc_set_bus_width(struct litex_mmc_host *host)
+{
+	bool app_cmd_sent;
+	int ret;
+
+	if (host->is_bus_width_set)
+		return 0;
+
+	/* Ensure 'app_cmd' precedes 'app_set_bus_width_cmd' */
+	app_cmd_sent = host->app_cmd; /* was preceding command app_cmd? */
+	if (!app_cmd_sent) {
+		ret = litex_mmc_send_app_cmd(host);
+		if (ret)
+			return ret;
+	}
+
+	/* LiteSDCard only supports 4-bit bus width */
+	ret = litex_mmc_send_set_bus_w_cmd(host, MMC_BUS_WIDTH_4);
+	if (ret)
+		return ret;
+
+	/* Re-send 'app_cmd' if necessary */
+	if (app_cmd_sent) {
+		ret = litex_mmc_send_app_cmd(host);
+		if (ret)
+			return ret;
+	}
+
+	host->is_bus_width_set = true;
+
+	return 0;
+}
+
+static int litex_mmc_get_cd(struct mmc_host *mmc)
+{
+	struct litex_mmc_host *host = mmc_priv(mmc);
+	int ret;
+
+	if (!mmc_card_is_removable(mmc))
+		return 1;
+
+	ret = !litex_read8(host->sdphy + LITEX_PHY_CARDDETECT);
+	if (ret)
+		return ret;
+
+	/* Ensure bus width will be set (again) upon card (re)insertion */
+	host->is_bus_width_set = false;
+
+	return 0;
+}
+
+static irqreturn_t litex_mmc_interrupt(int irq, void *arg)
+{
+	struct mmc_host *mmc = arg;
+	struct litex_mmc_host *host = mmc_priv(mmc);
+	u32 pending = litex_read32(host->sdirq + LITEX_IRQ_PENDING);
+	irqreturn_t ret = IRQ_NONE;
+
+	/* Check for card change interrupt */
+	if (pending & SDIRQ_CARD_DETECT) {
+		litex_write32(host->sdirq + LITEX_IRQ_PENDING,
+			      SDIRQ_CARD_DETECT);
+		mmc_detect_change(mmc, msecs_to_jiffies(10));
+		ret = IRQ_HANDLED;
+	}
+
+	/* Check for command completed */
+	if (pending & SDIRQ_CMD_DONE) {
+		/* Disable it so it doesn't keep interrupting */
+		litex_write32(host->sdirq + LITEX_IRQ_ENABLE,
+			      SDIRQ_CARD_DETECT);
+		complete(&host->cmd_done);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static u32 litex_mmc_response_len(struct mmc_command *cmd)
+{
+	if (cmd->flags & MMC_RSP_136)
+		return SD_CTL_RESP_LONG;
+	if (!(cmd->flags & MMC_RSP_PRESENT))
+		return SD_CTL_RESP_NONE;
+	if (cmd->flags & MMC_RSP_BUSY)
+		return SD_CTL_RESP_SHORT_BUSY;
+	return SD_CTL_RESP_SHORT;
+}
+
+static void litex_mmc_do_dma(struct litex_mmc_host *host, struct mmc_data *data,
+			     unsigned int *len, bool *direct, u8 *transfer)
+{
+	struct device *dev = mmc_dev(host->mmc);
+	dma_addr_t dma;
+	int sg_count;
+
+	/*
+	 * Try to DMA directly to/from the data buffer.
+	 * We can do that if the buffer can be mapped for DMA
+	 * in one contiguous chunk.
+	 */
+	dma = host->dma;
+	*len = data->blksz * data->blocks;
+	sg_count = dma_map_sg(dev, data->sg, data->sg_len,
+			      mmc_get_dma_dir(data));
+	if (sg_count == 1) {
+		dma = sg_dma_address(data->sg);
+		*len = sg_dma_len(data->sg);
+		*direct = true;
+	} else if (*len > host->buf_size)
+		*len = host->buf_size;
+
+	if (data->flags & MMC_DATA_READ) {
+		litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0);
+		litex_write64(host->sdreader + LITEX_BLK2MEM_BASE, dma);
+		litex_write32(host->sdreader + LITEX_BLK2MEM_LEN, *len);
+		litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 1);
+		*transfer = SD_CTL_DATA_XFER_READ;
+	} else if (data->flags & MMC_DATA_WRITE) {
+		if (!*direct)
+			sg_copy_to_buffer(data->sg, data->sg_len,
+					  host->buffer, *len);
+		litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0);
+		litex_write64(host->sdwriter + LITEX_MEM2BLK_BASE, dma);
+		litex_write32(host->sdwriter + LITEX_MEM2BLK_LEN, *len);
+		litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 1);
+		*transfer = SD_CTL_DATA_XFER_WRITE;
+	} else {
+		dev_warn(dev, "Data present w/o read or write flag.\n");
+		/* Continue: set cmd status, mark req done */
+	}
+
+	litex_write16(host->sdcore + LITEX_CORE_BLKLEN, data->blksz);
+	litex_write32(host->sdcore + LITEX_CORE_BLKCNT, data->blocks);
+}
+
+static void litex_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct litex_mmc_host *host = mmc_priv(mmc);
+	struct device *dev = mmc_dev(mmc);
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_command *sbc = mrq->sbc;
+	struct mmc_data *data = mrq->data;
+	struct mmc_command *stop = mrq->stop;
+	unsigned int retries = cmd->retries;
+	unsigned int len = 0;
+	bool direct = false;
+	u32 response_len = litex_mmc_response_len(cmd);
+	u8 transfer = SD_CTL_DATA_XFER_NONE;
+
+	/* First check that the card is still there */
+	if (!litex_mmc_get_cd(mmc)) {
+		cmd->error = -ENOMEDIUM;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	/* Send set-block-count command if needed */
+	if (sbc) {
+		sbc->error = litex_mmc_send_cmd(host, sbc->opcode, sbc->arg,
+						litex_mmc_response_len(sbc),
+						SD_CTL_DATA_XFER_NONE);
+		if (sbc->error) {
+			host->is_bus_width_set = false;
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+	}
+
+	if (data) {
+		/*
+		 * LiteSDCard only supports 4-bit bus width; therefore, we MUST
+		 * inject a SET_BUS_WIDTH (acmd6) before the very first data
+		 * transfer, earlier than when the mmc subsystem would normally
+		 * get around to it!
+		 */
+		cmd->error = litex_mmc_set_bus_width(host);
+		if (cmd->error) {
+			dev_err(dev, "Can't set bus width!\n");
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+
+		litex_mmc_do_dma(host, data, &len, &direct, &transfer);
+	}
+
+	do {
+		cmd->error = litex_mmc_send_cmd(host, cmd->opcode, cmd->arg,
+						response_len, transfer);
+	} while (cmd->error && retries-- > 0);
+
+	if (cmd->error) {
+		/* Card may be gone; don't assume bus width is still set */
+		host->is_bus_width_set = false;
+	}
+
+	if (response_len == SD_CTL_RESP_SHORT) {
+		/* Pull short response fields from appropriate host registers */
+		cmd->resp[0] = host->resp[3];
+		cmd->resp[1] = host->resp[2] & 0xFF;
+	} else if (response_len == SD_CTL_RESP_LONG) {
+		cmd->resp[0] = host->resp[0];
+		cmd->resp[1] = host->resp[1];
+		cmd->resp[2] = host->resp[2];
+		cmd->resp[3] = host->resp[3];
+	}
+
+	/* Send stop-transmission command if required */
+	if (stop && (cmd->error || !sbc)) {
+		stop->error = litex_mmc_send_cmd(host, stop->opcode, stop->arg,
+						 litex_mmc_response_len(stop),
+						 SD_CTL_DATA_XFER_NONE);
+		if (stop->error)
+			host->is_bus_width_set = false;
+	}
+
+	if (data) {
+		dma_unmap_sg(dev, data->sg, data->sg_len,
+			     mmc_get_dma_dir(data));
+	}
+
+	if (!cmd->error && transfer != SD_CTL_DATA_XFER_NONE) {
+		data->bytes_xfered = min(len, mmc->max_req_size);
+		if (transfer == SD_CTL_DATA_XFER_READ && !direct) {
+			sg_copy_from_buffer(data->sg, sg_nents(data->sg),
+					    host->buffer, data->bytes_xfered);
+		}
+	}
+
+	mmc_request_done(mmc, mrq);
+}
+
+static void litex_mmc_setclk(struct litex_mmc_host *host, unsigned int freq)
+{
+	struct device *dev = mmc_dev(host->mmc);
+	u32 div;
+
+	div = freq ? host->ref_clk / freq : 256U;
+	div = roundup_pow_of_two(div);
+	div = clamp(div, 2U, 256U);
+	dev_dbg(dev, "sd_clk_freq=%d: set to %d via div=%d\n",
+		freq, host->ref_clk / div, div);
+	litex_write16(host->sdphy + LITEX_PHY_CLOCKERDIV, div);
+	host->sd_clk = freq;
+}
+
+static void litex_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct litex_mmc_host *host = mmc_priv(mmc);
+
+	/*
+	 * NOTE: Ignore any ios->bus_width updates; they occur right after
+	 * the mmc core sends its own acmd6 bus-width change notification,
+	 * which is redundant since we snoop on the command flow and inject
+	 * an early acmd6 before the first data transfer command is sent!
+	 */
+
+	/* Update sd_clk */
+	if (ios->clock != host->sd_clk)
+		litex_mmc_setclk(host, ios->clock);
+}
+
+static const struct mmc_host_ops litex_mmc_ops = {
+	.get_cd = litex_mmc_get_cd,
+	.request = litex_mmc_request,
+	.set_ios = litex_mmc_set_ios,
+};
+
+static int litex_mmc_irq_init(struct platform_device *pdev,
+			      struct litex_mmc_host *host)
+{
+	struct device *dev = mmc_dev(host->mmc);
+	int ret;
+
+	ret = platform_get_irq_optional(pdev, 0);
+	if (ret < 0 && ret != -ENXIO)
+		return ret;
+	if (ret > 0)
+		host->irq = ret;
+	else {
+		dev_warn(dev, "Failed to get IRQ, using polling\n");
+		goto use_polling;
+	}
+
+	host->sdirq = devm_platform_ioremap_resource_byname(pdev, "irq");
+	if (IS_ERR(host->sdirq))
+		return PTR_ERR(host->sdirq);
+
+	ret = devm_request_irq(dev, host->irq, litex_mmc_interrupt, 0,
+			       "litex-mmc", host->mmc);
+	if (ret < 0) {
+		dev_warn(dev, "IRQ request error %d, using polling\n", ret);
+		goto use_polling;
+	}
+
+	/* Clear & enable card-change interrupts */
+	litex_write32(host->sdirq + LITEX_IRQ_PENDING, SDIRQ_CARD_DETECT);
+	litex_write32(host->sdirq + LITEX_IRQ_ENABLE, SDIRQ_CARD_DETECT);
+
+	return 0;
+
+use_polling:
+	host->mmc->caps |= MMC_CAP_NEEDS_POLL;
+	return 0;
+}
+
+static void litex_mmc_free_host_wrapper(void *mmc)
+{
+	mmc_free_host(mmc);
+}
+
+static int litex_mmc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct litex_mmc_host *host;
+	struct mmc_host *mmc;
+	struct clk *clk;
+	int ret;
+
+	/*
+	 * NOTE: defaults to max_[req,seg]_size=PAGE_SIZE, max_blk_size=512,
+	 * and max_blk_count accordingly set to 8;
+	 * If for some reason we need to modify max_blk_count, we must also
+	 * re-calculate `max_[req,seg]_size = max_blk_size * max_blk_count;`
+	 */
+	mmc = mmc_alloc_host(sizeof(struct litex_mmc_host), dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	ret = devm_add_action_or_reset(dev, litex_mmc_free_host_wrapper, mmc);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Can't register mmc_free_host action\n");
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+
+	/* Initialize clock source */
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk), "can't get clock\n");
+	host->ref_clk = clk_get_rate(clk);
+	host->sd_clk = 0;
+
+	/*
+	 * LiteSDCard only supports 4-bit bus width; therefore, we MUST inject
+	 * a SET_BUS_WIDTH (acmd6) before the very first data transfer, earlier
+	 * than when the mmc subsystem would normally get around to it!
+	 */
+	host->is_bus_width_set = false;
+	host->app_cmd = false;
+
+	/* LiteSDCard can support 64-bit DMA addressing */
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+	if (ret)
+		return ret;
+
+	host->buf_size = mmc->max_req_size * 2;
+	host->buffer = dmam_alloc_coherent(dev, host->buf_size,
+					   &host->dma, GFP_KERNEL);
+	if (host->buffer == NULL)
+		return -ENOMEM;
+
+	host->sdphy = devm_platform_ioremap_resource_byname(pdev, "phy");
+	if (IS_ERR(host->sdphy))
+		return PTR_ERR(host->sdphy);
+
+	host->sdcore = devm_platform_ioremap_resource_byname(pdev, "core");
+	if (IS_ERR(host->sdcore))
+		return PTR_ERR(host->sdcore);
+
+	host->sdreader = devm_platform_ioremap_resource_byname(pdev, "reader");
+	if (IS_ERR(host->sdreader))
+		return PTR_ERR(host->sdreader);
+
+	host->sdwriter = devm_platform_ioremap_resource_byname(pdev, "writer");
+	if (IS_ERR(host->sdwriter))
+		return PTR_ERR(host->sdwriter);
+
+	/* Ensure DMA bus masters are disabled */
+	litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0);
+	litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0);
+
+	init_completion(&host->cmd_done);
+	ret = litex_mmc_irq_init(pdev, host);
+	if (ret)
+		return ret;
+
+	mmc->ops = &litex_mmc_ops;
+
+	ret = mmc_regulator_get_supply(mmc);
+	if (ret || mmc->ocr_avail == 0) {
+		dev_warn(dev, "can't get voltage, defaulting to 3.3V\n");
+		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+
+	/*
+	 * Set default sd_clk frequency range based on empirical observations
+	 * of LiteSDCard gateware behavior on typical SDCard media
+	 */
+	mmc->f_min = 12.5e6;
+	mmc->f_max = 50e6;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		return ret;
+
+	/* Force 4-bit bus_width (only width supported by hardware) */
+	mmc->caps &= ~MMC_CAP_8_BIT_DATA;
+	mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	/* Set default capabilities */
+	mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY |
+		     MMC_CAP_DRIVER_TYPE_D |
+		     MMC_CAP_CMD23;
+	mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT |
+		      MMC_CAP2_NO_SDIO |
+		      MMC_CAP2_NO_MMC;
+
+	platform_set_drvdata(pdev, host);
+
+	ret = mmc_add_host(mmc);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "LiteX MMC controller initialized.\n");
+	return 0;
+}
+
+static int litex_mmc_remove(struct platform_device *pdev)
+{
+	struct litex_mmc_host *host = platform_get_drvdata(pdev);
+
+	mmc_remove_host(host->mmc);
+	return 0;
+}
+
+static const struct of_device_id litex_match[] = {
+	{ .compatible = "litex,mmc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, litex_match);
+
+static struct platform_driver litex_mmc_driver = {
+	.probe = litex_mmc_probe,
+	.remove = litex_mmc_remove,
+	.driver = {
+		.name = "litex-mmc",
+		.of_match_table = litex_match,
+	},
+};
+module_platform_driver(litex_mmc_driver);
+
+MODULE_DESCRIPTION("LiteX SDCard driver");
+MODULE_AUTHOR("Antmicro <contact@antmicro.com>");
+MODULE_AUTHOR("Kamil Rakoczy <krakoczy@antmicro.com>");
+MODULE_AUTHOR("Maciej Dudek <mdudek@internships.antmicro.com>");
+MODULE_AUTHOR("Paul Mackerras <paulus@ozlabs.org>");
+MODULE_AUTHOR("Gabriel Somlo <gsomlo@gmail.com>");
+MODULE_LICENSE("GPL v2");