diff options
author | Eric Andersson <eric.andersson@unixphere.com> | 2012-04-09 22:16:17 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-04-18 14:57:14 -0700 |
commit | 985087dbcb0265f46e8651fdc7e974f8a7184423 (patch) | |
tree | aad96003f89022623f4c8bf940267300530a9eb2 | |
parent | c5a86ab6dd6e424c56826421a80b855e24f7caa1 (diff) | |
download | linux-stable-985087dbcb0265f46e8651fdc7e974f8a7184423.tar.gz linux-stable-985087dbcb0265f46e8651fdc7e974f8a7184423.tar.bz2 linux-stable-985087dbcb0265f46e8651fdc7e974f8a7184423.zip |
misc: add support for bmp18x chips to the bmp085 driver
The bmp18x chip family comes in an I2C respectively SPI variant.
Hence, the bmp085 driver was split to support both buses.
Tested-by: Zhengguang Guo <zhengguang.guo@bosch-sensortec.com>
Reviewed-by: Stefan Nilsson <stefan.nilsson@unixphere.com>
Signed-off-by: Eric Andersson <eric.andersson@unixphere.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/misc/Kconfig | 26 | ||||
-rw-r--r-- | drivers/misc/Makefile | 2 | ||||
-rw-r--r-- | drivers/misc/bmp085-i2c.c | 91 | ||||
-rw-r--r-- | drivers/misc/bmp085-spi.c | 91 | ||||
-rw-r--r-- | drivers/misc/bmp085.c | 163 | ||||
-rw-r--r-- | drivers/misc/bmp085.h | 33 |
6 files changed, 306 insertions, 100 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index c7795096d43b..968469555956 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -452,14 +452,32 @@ config ARM_CHARLCD still useful. config BMP085 - tristate "BMP085 digital pressure sensor" + bool + depends on SYSFS + +config BMP085_I2C + tristate "BMP085 digital pressure sensor on I2C" + select BMP085 + select REGMAP_I2C depends on I2C && SYSFS help - If you say yes here you get support for the Bosch Sensortec - BMP085 digital pressure sensor. + Say Y here if you want to support Bosch Sensortec's digital pressure + sensor hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called bmp085-i2c. + +config BMP085_SPI + tristate "BMP085 digital pressure sensor on SPI" + select BMP085 + select REGMAP_SPI + depends on SPI_MASTER && SYSFS + help + Say Y here if you want to support Bosch Sensortec's digital pressure + sensor hooked to an SPI bus. To compile this driver as a module, choose M here: the - module will be called bmp085. + module will be called bmp085-spi. config PCH_PHUB tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 3e1d80106f04..509d0569dc04 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_BMP085) += bmp085.o +obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o +obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c new file mode 100644 index 000000000000..9943971c13e3 --- /dev/null +++ b/drivers/misc/bmp085-i2c.c @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2012 Bosch Sensortec GmbH + * Copyright (c) 2012 Unixphere AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include "bmp085.h" + +#define BMP085_I2C_ADDRESS 0x77 + +static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS, + I2C_CLIENT_END }; + +static int bmp085_i2c_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + if (client->addr != BMP085_I2C_ADDRESS) + return -ENODEV; + + return bmp085_detect(&client->dev); +} + +static int __devinit bmp085_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err; + struct regmap *regmap = devm_regmap_init_i2c(client, + &bmp085_regmap_config); + + if (IS_ERR(regmap)) { + err = PTR_ERR(regmap); + dev_err(&client->dev, "Failed to init regmap: %d\n", err); + return err; + } + + return bmp085_probe(&client->dev, regmap); +} + +static int bmp085_i2c_remove(struct i2c_client *client) +{ + return bmp085_remove(&client->dev); +} + +static const struct of_device_id bmp085_of_match[] = { + { .compatible = "bosch,bmp085", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bmp085_of_match); + +static const struct i2c_device_id bmp085_id[] = { + { BMP085_NAME, 0 }, + { "bmp180", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bmp085_id); + +static struct i2c_driver bmp085_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = BMP085_NAME, + .of_match_table = bmp085_of_match + }, + .id_table = bmp085_id, + .probe = bmp085_i2c_probe, + .remove = __devexit_p(bmp085_i2c_remove), + + .detect = bmp085_i2c_detect, + .address_list = normal_i2c +}; + +module_i2c_driver(bmp085_i2c_driver); + +MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>"); +MODULE_DESCRIPTION("BMP085 I2C bus driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/bmp085-spi.c b/drivers/misc/bmp085-spi.c new file mode 100644 index 000000000000..78aaff9b5231 --- /dev/null +++ b/drivers/misc/bmp085-spi.c @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2012 Bosch Sensortec GmbH + * Copyright (c) 2012 Unixphere AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/err.h> +#include "bmp085.h" + +static int __devinit bmp085_spi_probe(struct spi_device *client) +{ + int err; + struct regmap *regmap; + + client->bits_per_word = 8; + err = spi_setup(client); + if (err < 0) { + dev_err(&client->dev, "spi_setup failed!\n"); + return err; + } + + regmap = devm_regmap_init_spi(client, &bmp085_regmap_config); + if (IS_ERR(regmap)) { + err = PTR_ERR(regmap); + dev_err(&client->dev, "Failed to init regmap: %d\n", err); + return err; + } + + return bmp085_probe(&client->dev, regmap); +} + +static int bmp085_spi_remove(struct spi_device *client) +{ + return bmp085_remove(&client->dev); +} + +static const struct of_device_id bmp085_of_match[] = { + { .compatible = "bosch,bmp085", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bmp085_of_match); + +static const struct spi_device_id bmp085_id[] = { + { "bmp180", 0 }, + { "bmp181", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, bmp085_id); + +static struct spi_driver bmp085_spi_driver = { + .driver = { + .owner = THIS_MODULE, + .name = BMP085_NAME, + .of_match_table = bmp085_of_match + }, + .id_table = bmp085_id, + .probe = bmp085_spi_probe, + .remove = __devexit_p(bmp085_spi_remove) +}; + +static int __init bmp085_spi_init(void) +{ + return spi_register_driver(&bmp085_spi_driver); +} + +static void __exit bmp085_spi_exit(void) +{ + spi_unregister_driver(&bmp085_spi_driver); +} + +MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>"); +MODULE_DESCRIPTION("BMP085 SPI bus driver"); +MODULE_LICENSE("GPL"); + +module_init(bmp085_spi_init); +module_exit(bmp085_spi_exit); diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c index 6adde9e1a0d1..62e418293b7e 100644 --- a/drivers/misc/bmp085.c +++ b/drivers/misc/bmp085.c @@ -2,10 +2,11 @@ * Copyright (c) 2012 Bosch Sensortec GmbH * Copyright (c) 2012 Unixphere AB * - * This driver supports the bmp085 digital barometric pressure - * and temperature sensor from Bosch Sensortec. The datasheet - * is available from their website: + * This driver supports the bmp085 and bmp18x digital barometric pressure + * and temperature sensors from Bosch Sensortec. The datasheets + * are available from their website: * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf + * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf * * A pressure measurement is issued by reading from pressure0_input. * The return value ranges from 30000 to 110000 pascal with a resulution @@ -47,15 +48,12 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/init.h> -#include <linux/i2c.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/of.h> +#include "bmp085.h" -#define BMP085_NAME "bmp085" -#define BMP085_I2C_ADDRESS 0x77 #define BMP085_CHIP_ID 0x55 - #define BMP085_CALIBRATION_DATA_START 0xAA #define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */ #define BMP085_CHIP_ID_REG 0xD0 @@ -67,9 +65,6 @@ #define BMP085_CONVERSION_REGISTER_XLSB 0xF8 #define BMP085_TEMP_CONVERSION_TIME 5 -static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS, - I2C_CLIENT_END }; - struct bmp085_calibration_data { s16 AC1, AC2, AC3; u16 AC4, AC5, AC6; @@ -78,7 +73,8 @@ struct bmp085_calibration_data { }; struct bmp085_data { - struct i2c_client *client; + struct device *dev; + struct regmap *regmap; struct mutex lock; struct bmp085_calibration_data calibration; u8 oversampling_setting; @@ -90,21 +86,16 @@ struct bmp085_data { s32 b6; /* calculated temperature correction coefficient */ }; -static s32 bmp085_read_calibration_data(struct i2c_client *client) +static s32 bmp085_read_calibration_data(struct bmp085_data *data) { u16 tmp[BMP085_CALIBRATION_DATA_LENGTH]; - struct bmp085_data *data = i2c_get_clientdata(client); struct bmp085_calibration_data *cali = &(data->calibration); - s32 status = i2c_smbus_read_i2c_block_data(client, - BMP085_CALIBRATION_DATA_START, - (BMP085_CALIBRATION_DATA_LENGTH << 1), - (u8 *)tmp); + s32 status = regmap_bulk_read(data->regmap, + BMP085_CALIBRATION_DATA_START, (u8 *)tmp, + (BMP085_CALIBRATION_DATA_LENGTH << 1)); if (status < 0) return status; - if (status != (BMP085_CALIBRATION_DATA_LENGTH << 1)) - return -EIO; - cali->AC1 = be16_to_cpu(tmp[0]); cali->AC2 = be16_to_cpu(tmp[1]); cali->AC3 = be16_to_cpu(tmp[2]); @@ -125,23 +116,20 @@ static s32 bmp085_update_raw_temperature(struct bmp085_data *data) s32 status; mutex_lock(&data->lock); - status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, - BMP085_TEMP_MEASUREMENT); + status = regmap_write(data->regmap, BMP085_CTRL_REG, + BMP085_TEMP_MEASUREMENT); if (status < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error while requesting temperature measurement.\n"); goto exit; } msleep(BMP085_TEMP_CONVERSION_TIME); - status = i2c_smbus_read_i2c_block_data(data->client, - BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp); - if (status < 0) - goto exit; - if (status != sizeof(tmp)) { - dev_err(&data->client->dev, + status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB, + &tmp, sizeof(tmp)); + if (status < 0) { + dev_err(data->dev, "Error while reading temperature measurement result\n"); - status = -EIO; goto exit; } data->raw_temperature = be16_to_cpu(tmp); @@ -159,11 +147,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data) s32 status; mutex_lock(&data->lock); - status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, + status = regmap_write(data->regmap, BMP085_CTRL_REG, BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting << 6)); if (status < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error while requesting pressure measurement.\n"); goto exit; } @@ -172,14 +160,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data) msleep(2+(3 << data->oversampling_setting)); /* copy data into a u32 (4 bytes), but skip the first byte. */ - status = i2c_smbus_read_i2c_block_data(data->client, - BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1); - if (status < 0) - goto exit; - if (status != 3) { - dev_err(&data->client->dev, + status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB, + ((u8 *)&tmp)+1, 3); + if (status < 0) { + dev_err(data->dev, "Error while reading pressure measurement results\n"); - status = -EIO; goto exit; } data->raw_pressure = be32_to_cpu((tmp)); @@ -304,8 +289,7 @@ static ssize_t set_oversampling(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct bmp085_data *data = i2c_get_clientdata(client); + struct bmp085_data *data = dev_get_drvdata(dev); unsigned long oversampling; int err = kstrtoul(buf, 10, &oversampling); @@ -322,8 +306,7 @@ static ssize_t set_oversampling(struct device *dev, static ssize_t show_oversampling(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct bmp085_data *data = i2c_get_clientdata(client); + struct bmp085_data *data = dev_get_drvdata(dev); return sprintf(buf, "%u\n", bmp085_get_oversampling(data)); } @@ -336,8 +319,7 @@ static ssize_t show_temperature(struct device *dev, { int temperature; int status; - struct i2c_client *client = to_i2c_client(dev); - struct bmp085_data *data = i2c_get_clientdata(client); + struct bmp085_data *data = dev_get_drvdata(dev); status = bmp085_get_temperature(data, &temperature); if (status < 0) @@ -353,8 +335,7 @@ static ssize_t show_pressure(struct device *dev, { int pressure; int status; - struct i2c_client *client = to_i2c_client(dev); - struct bmp085_data *data = i2c_get_clientdata(client); + struct bmp085_data *data = dev_get_drvdata(dev); status = bmp085_get_pressure(data, &pressure); if (status < 0) @@ -376,22 +357,27 @@ static const struct attribute_group bmp085_attr_group = { .attrs = bmp085_attributes, }; -static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info) +int bmp085_detect(struct device *dev) { - if (client->addr != BMP085_I2C_ADDRESS) - return -ENODEV; + struct bmp085_data *data = dev_get_drvdata(dev); + unsigned int id; + int ret; + + ret = regmap_read(data->regmap, BMP085_CHIP_ID_REG, &id); + if (ret < 0) + return ret; - if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID) + if (id != data->chip_id) return -ENODEV; return 0; } +EXPORT_SYMBOL_GPL(bmp085_detect); -static void __init bmp085_get_of_properties(struct i2c_client *client, - struct bmp085_data *data) +static void __init bmp085_get_of_properties(struct bmp085_data *data) { #ifdef CONFIG_OF - struct device_node *np = client->dev.of_node; + struct device_node *np = data->dev->of_node; u32 prop; if (!np) @@ -408,30 +394,33 @@ static void __init bmp085_get_of_properties(struct i2c_client *client, #endif } -static int bmp085_init_client(struct i2c_client *client) +static int bmp085_init_client(struct bmp085_data *data) { - struct bmp085_data *data = i2c_get_clientdata(client); - int status = bmp085_read_calibration_data(client); + int status = bmp085_read_calibration_data(data); if (status < 0) return status; /* default settings */ - data->client = client; data->chip_id = BMP085_CHIP_ID; data->last_temp_measurement = 0; data->temp_measurement_period = 1*HZ; data->oversampling_setting = 3; - bmp085_get_of_properties(client, data); + bmp085_get_of_properties(data); mutex_init(&data->lock); return 0; } -static int __devinit bmp085_probe(struct i2c_client *client, - const struct i2c_device_id *id) +struct regmap_config bmp085_regmap_config = { + .reg_bits = 8, + .val_bits = 8 +}; +EXPORT_SYMBOL_GPL(bmp085_regmap_config); + +__devinit int bmp085_probe(struct device *dev, struct regmap *regmap) { struct bmp085_data *data; int err = 0; @@ -442,19 +431,27 @@ static int __devinit bmp085_probe(struct i2c_client *client, goto exit; } - i2c_set_clientdata(client, data); + dev_set_drvdata(dev, data); + data->dev = dev; + data->regmap = regmap; /* Initialize the BMP085 chip */ - err = bmp085_init_client(client); + err = bmp085_init_client(data); if (err < 0) goto exit_free; + err = bmp085_detect(dev); + if (err < 0) { + dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME); + goto exit_free; + } + /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group); + err = sysfs_create_group(&dev->kobj, &bmp085_attr_group); if (err) goto exit_free; - dev_info(&client->dev, "Successfully initialized %s!\n", BMP085_NAME); + dev_info(dev, "Successfully initialized %s!\n", BMP085_NAME); return 0; @@ -463,44 +460,18 @@ exit_free: exit: return err; } +EXPORT_SYMBOL_GPL(bmp085_probe); -static int __devexit bmp085_remove(struct i2c_client *client) +int bmp085_remove(struct device *dev) { - struct bmp085_data *data = i2c_get_clientdata(client); + struct bmp085_data *data = dev_get_drvdata(dev); - sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group); + sysfs_remove_group(&data->dev->kobj, &bmp085_attr_group); kfree(data); return 0; } - -static const struct of_device_id bmp085_of_match[] = { - { .compatible = "bosch,bmp085", }, - { }, -}; -MODULE_DEVICE_TABLE(of, bmp085_of_match); - -static const struct i2c_device_id bmp085_id[] = { - { BMP085_NAME, 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, bmp085_id); - -static struct i2c_driver bmp085_driver = { - .driver = { - .owner = THIS_MODULE, - .name = BMP085_NAME, - .of_match_table = bmp085_of_match - }, - .id_table = bmp085_id, - .probe = bmp085_probe, - .remove = __devexit_p(bmp085_remove), - - .detect = bmp085_detect, - .address_list = normal_i2c -}; - -module_i2c_driver(bmp085_driver); +EXPORT_SYMBOL_GPL(bmp085_remove); MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com>"); MODULE_DESCRIPTION("BMP085 driver"); diff --git a/drivers/misc/bmp085.h b/drivers/misc/bmp085.h new file mode 100644 index 000000000000..2b8f615bca92 --- /dev/null +++ b/drivers/misc/bmp085.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2012 Bosch Sensortec GmbH + * Copyright (c) 2012 Unixphere AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BMP085_H +#define _BMP085_H + +#include <linux/regmap.h> + +#define BMP085_NAME "bmp085" + +extern struct regmap_config bmp085_regmap_config; + +int bmp085_probe(struct device *dev, struct regmap *regmap); +int bmp085_remove(struct device *dev); +int bmp085_detect(struct device *dev); + +#endif |