diff options
author | Martin Kaiser <martin@kaiser.cx> | 2021-07-18 19:36:07 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2021-07-21 10:31:22 +0200 |
commit | 9d326c02ef0ee693c87c7af3ef1c69e9e1467a61 (patch) | |
tree | 7a40b9a37c28c240ea529dd5dbf3a2dbcc57a1ee | |
parent | dff70f7fbed361b6b5dbffe7607a3c515bfef009 (diff) | |
download | linux-stable-9d326c02ef0ee693c87c7af3ef1c69e9e1467a61.tar.gz linux-stable-9d326c02ef0ee693c87c7af3ef1c69e9e1467a61.tar.bz2 linux-stable-9d326c02ef0ee693c87c7af3ef1c69e9e1467a61.zip |
staging: rtl8188eu: remove unused power flows and transitions
The driver defines a couple of "flows" to move the chip into a certain
power state. Each flow is a sequence of "transitions".
This patch removes flows and transitions which are not used.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210718173610.894-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/staging/rtl8188eu/hal/pwrseq.c | 52 | ||||
-rw-r--r-- | drivers/staging/rtl8188eu/include/pwrseq.h | 112 | ||||
-rw-r--r-- | drivers/staging/rtl8188eu/include/rtl8188e_hal.h | 6 |
3 files changed, 0 insertions, 170 deletions
diff --git a/drivers/staging/rtl8188eu/hal/pwrseq.c b/drivers/staging/rtl8188eu/hal/pwrseq.c index f7890a8f4673..80bf9692844f 100644 --- a/drivers/staging/rtl8188eu/hal/pwrseq.c +++ b/drivers/staging/rtl8188eu/hal/pwrseq.c @@ -17,13 +17,6 @@ struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END }; -/* 3Radio off Array */ -struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_END_STEPS] = { - RTL8188E_TRANS_ACT_TO_CARDEMU - RTL8188E_TRANS_END -}; - /* 3Card Disable Array */ struct wl_pwr_cfg rtl8188E_card_disable_flow [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + @@ -34,43 +27,6 @@ struct wl_pwr_cfg rtl8188E_card_disable_flow RTL8188E_TRANS_END }; -/* 3 Card Enable Array */ -struct wl_pwr_cfg rtl8188E_card_enable_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + - RTL8188E_TRANS_END_STEPS] = { - RTL8188E_TRANS_CARDDIS_TO_CARDEMU - RTL8188E_TRANS_CARDEMU_TO_ACT - RTL8188E_TRANS_END -}; - -/* 3Suspend Array */ -struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + - RTL8188E_TRANS_END_STEPS] = { - RTL8188E_TRANS_ACT_TO_CARDEMU - RTL8188E_TRANS_CARDEMU_TO_SUS - RTL8188E_TRANS_END -}; - -/* 3 Resume Array */ -struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + - RTL8188E_TRANS_END_STEPS] = { - RTL8188E_TRANS_SUS_TO_CARDEMU - RTL8188E_TRANS_CARDEMU_TO_ACT - RTL8188E_TRANS_END -}; - -/* 3HWPDN Array */ -struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + - RTL8188E_TRANS_END_STEPS] = { - RTL8188E_TRANS_ACT_TO_CARDEMU - RTL8188E_TRANS_CARDEMU_TO_PDN - RTL8188E_TRANS_END -}; - /* 3 Enter LPS */ struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS] = { @@ -78,11 +34,3 @@ struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_ACT_TO_LPS RTL8188E_TRANS_END }; - -/* 3 Leave LPS */ -struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS + - RTL8188E_TRANS_END_STEPS] = { - /* FW behavior */ - RTL8188E_TRANS_LPS_TO_ACT - RTL8188E_TRANS_END -}; diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h index c4b76064476f..caa6bf71da77 100644 --- a/drivers/staging/rtl8188eu/include/pwrseq.h +++ b/drivers/staging/rtl8188eu/include/pwrseq.h @@ -20,27 +20,12 @@ * 4: LPS--Low Power State * 5: SUS--Suspend * - * The transition from different states are defined below - * TRANS_CARDEMU_TO_ACT - * TRANS_ACT_TO_CARDEMU - * TRANS_CARDEMU_TO_SUS - * TRANS_SUS_TO_CARDEMU - * TRANS_CARDEMU_TO_PDN - * TRANS_ACT_TO_LPS - * TRANS_LPS_TO_ACT - * - * TRANS_END - * * PWR SEQ Version: rtl8188E_PwrSeq_V09.h */ #define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10 #define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10 -#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10 -#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10 #define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10 -#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10 #define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15 -#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15 #define RTL8188E_TRANS_END_STEPS 1 #define RTL8188E_TRANS_CARDEMU_TO_ACT \ @@ -81,30 +66,6 @@ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(1), 0}, \ /*wait till 0x04[9] = 0 polling until return 0 to disable*/ -#define RTL8188E_TRANS_CARDEMU_TO_SUS \ - /* format - * { offset, cut_msk, cmd, msk, - * value }, - * comments here - */ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \ - /* 0x04[12:11] = 2b'01enable WL suspend */ \ - {0x0007, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, BIT(7)}, \ - /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ - {0x0041, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \ - /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ - {0xfe10, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ - /*Set USB suspend enable local register 0xfe10[4]=1 */ - -#define RTL8188E_TRANS_SUS_TO_CARDEMU \ - /* format - * { offset, cut_msk, cmd, msk, - * value }, - * comments here - */ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \ - /*0x04[12:11] = 2b'01enable WL suspend*/ - #define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \ /* format * { offset, cut_msk, cmd, msk, @@ -122,35 +83,6 @@ {0xfe10, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ /*Set USB suspend enable local register 0xfe10[4]=1 */ -#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \ - /* format - * { offset, cut_msk, cmd, msk, - * value }, - * comments here - */ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \ - /*0x04[12:11] = 2b'01enable WL suspend*/ - -#define RTL8188E_TRANS_CARDEMU_TO_PDN \ - /* format - * { offset, cut_msk, cmd, msk, - * value }, - * comments here - */ \ - {0x0006, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), 0}, \ - /* 0x04[16] = 0*/ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ - /* 0x04[15] = 1*/ - -#define RTL8188E_TRANS_PDN_TO_CARDEMU \ - /* format - * { offset, cut_msk, cmd, msk, - * value }, - * comments here - */ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), 0}, \ - /* 0x04[15] = 0*/ - /* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */ #define RTL8188E_TRANS_ACT_TO_LPS \ /* format @@ -178,31 +110,6 @@ {0x0553, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(5), BIT(5)}, \ /*Respond TxOK to scheduler*/ -#define RTL8188E_TRANS_LPS_TO_ACT \ - /* format - * { offset, cut_msk, cmd, msk, - * value }, - * comments here - */ \ - {0xFE58, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x84}, \ - /*USB RPWM*/ \ - {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, \ - /*Delay*/ \ - {0x0008, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \ - /* 0x08[4] = 0 switch TSF to 40M */ \ - {0x0109, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(7), 0}, \ - /* Polling 0x109[7]=0 TSF in 40M */ \ - {0x0029, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(6) | BIT(7), 0}, \ - /* 0x29[7:6] = 2b'00 enable BB clock */ \ - {0x0101, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ - /* 0x101[1] = 1 */ \ - {0x0100, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0xFF}, \ - /* 0x100[7:0] = 0xFF enable WMAC TRX */ \ - {0x0002, PWR_CUT_ALL_MSK, \ - PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \ - /* 0x02[1:0] = 2b'11 enable BB macro */ \ - {0x0522, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/ - #define RTL8188E_TRANS_END \ /* format * { offset, cut_msk, cmd, msk, @@ -213,30 +120,11 @@ extern struct wl_pwr_cfg rtl8188E_power_on_flow [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS]; -extern struct wl_pwr_cfg rtl8188E_radio_off_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS]; extern struct wl_pwr_cfg rtl8188E_card_disable_flow [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS]; -extern struct wl_pwr_cfg rtl8188E_card_enable_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wl_pwr_cfg rtl8188E_suspend_flow[ - RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wl_pwr_cfg rtl8188E_resume_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wl_pwr_cfg rtl8188E_hwpdn_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS]; extern struct wl_pwr_cfg rtl8188E_enter_lps_flow [RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS]; -extern struct wl_pwr_cfg rtl8188E_leave_lps_flow - [RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS]; #endif /* __HAL8188EPWRSEQ_H__ */ diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h index f585cbe21a6f..e508b4b9ef7f 100644 --- a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h +++ b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h @@ -22,14 +22,8 @@ /* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */ #define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow -#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow #define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow -#define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow -#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow -#define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow -#define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow #define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow -#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow #define DRVINFO_SZ 4 /* unit is 8bytes */ #define PageNum_128(_Len) (u32)(((_Len) >> 7) + ((_Len) & 0x7F ? 1 : 0)) |