diff options
author | Konrad Dybcio <konrad.dybcio@somainline.org> | 2022-04-30 18:23:40 +0200 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-06-27 15:58:44 -0500 |
commit | ce383e80782e9b416d5022dc692fc80306358372 (patch) | |
tree | 9fe626a7574b094a6306236d15d3eb68800af6c7 | |
parent | 12541f687e4994774cbb4158e5fe3ecd6c639bdf (diff) | |
download | linux-stable-ce383e80782e9b416d5022dc692fc80306358372.tar.gz linux-stable-ce383e80782e9b416d5022dc692fc80306358372.tar.bz2 linux-stable-ce383e80782e9b416d5022dc692fc80306358372.zip |
arm64: dts: qcom: msm8998-clamshell: Clean up the DT
Keep the nodes and includes in order, clean up unnecessary properties & nodes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220430162353.607709-2-konrad.dybcio@somainline.org
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 118 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8005.dtsi | 4 |
2 files changed, 73 insertions, 49 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 6e70c1ead5e1..a8756bcdad3b 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -8,13 +8,10 @@ */ #include "msm8998.dtsi" -#include "pm8998.dtsi" #include "pm8005.dtsi" +#include "pm8998.dtsi" / { - chosen { - }; - vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -37,6 +34,28 @@ }; }; +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + /* * The laptop FW does not appear to support the retention state as it is * not advertised as enabled in ACPI, and enabling it in DT can cause boot @@ -82,20 +101,16 @@ status = "okay"; }; -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; + /* hack until we rig up the gpu consumer */ + regulator-always-on; }; }; @@ -143,127 +158,156 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2040000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-allow-set-load; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <1808000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l14a_1p88: l14 { regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; regulator-allow-set-load; }; + vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l19a_3p0: l19 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; + vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; regulator-system-load = <800000>; }; + vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; regulator-max-microvolt = <2864000>; }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; regulator-allow-set-load; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; @@ -278,7 +322,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - }; }; @@ -286,15 +329,6 @@ status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - touchpad: touchpad-pin { - pins = "gpio123"; - bias-pull-up; - }; -}; - &sdhc2 { status = "okay"; @@ -306,6 +340,15 @@ pinctrl-1 = <&sdc2_off &sdc2_cd>; }; +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchpad: touchpad-pin { + pins = "gpio123"; + bias-pull-up; + }; +}; + &ufshc { status = "okay"; }; @@ -339,26 +382,3 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; }; - -/* PINCTRL - board-specific pinctrl */ -&blsp1_uart3_on { - rx { - /delete-property/ bias-disable; - /* - * Configure a pull-up on 45 (RX). This is needed to - * avoid garbage data when the TX pin of the Bluetooth - * module is in tri-state (module powered off or not - * driving the signal yet). - */ - bias-pull-up; - }; - - cts { - /delete-property/ bias-disable; - /* - * Configure a pull-down on 47 (CTS) to match the pull - * of the Bluetooth module. - */ - bias-pull-down; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 3f97607d8baa..50fb6c753bf8 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -28,5 +28,9 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8005_regulators: regulators { + compatible = "qcom,pm8005-regulators"; + }; }; }; |