PCI: Add support for Immediate Readiness

PCIe r4.0, sec 7.5.1.1.4 defines a new bit in the Status Register:

  Immediate Readiness – This optional bit, when Set, indicates the Function
  is guaranteed to be ready to successfully complete valid configuration
  accesses at any time following any reset that the host is capable of
  issuing Configuration Requests to this Function.

  When this bit is Set, for accesses to this Function, software is exempt
  from all requirements to delay configuration accesses following any type
  of reset, including but not limited to the timing requirements defined in
  Section 6.6.

This means that all delays after a Conventional or Function Reset can be
skipped.

This patch reads such bit and caches its value in a flag inside struct
pci_dev to be checked later if we should delay or can skip delays after a
reset.  While at that, also move the explicit msleep(100) call from
pcie_flr() and pci_af_flr() to pci_dev_wait().

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bhelgaas: rename PCI_STATUS_IMMEDIATE to PCI_STATUS_IMM_READY]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

3 files changed, 14 insertions, 1 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1835f3a7aa8d..ee7c2f4eef9b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -999,7 +999,7 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
 		 * because have already delayed for the bridge.
 		 */
 		if (dev->runtime_d3cold) {
-			if (dev->d3cold_delay)
+			if (dev->d3cold_delay && !dev->imm_ready)
 				msleep(dev->d3cold_delay);
 			/*
 			 * When powering on a bridge from D3cold, the
@@ -2644,6 +2644,7 @@ EXPORT_SYMBOL_GPL(pci_d3cold_disable);
 void pci_pm_init(struct pci_dev *dev)
 {
 	int pm;
+	u16 status;
 	u16 pmc;
 
 	pm_runtime_forbid(&dev->dev);
@@ -2706,6 +2707,10 @@ void pci_pm_init(struct pci_dev *dev)
 		/* Disable the PME# generation functionality */
 		pci_pme_active(dev, false);
 	}
+
+	pci_read_config_word(dev, PCI_STATUS, &status);
+	if (status & PCI_STATUS_IMM_READY)
+		dev->imm_ready = 1;
 }
 
 static unsigned long pci_ea_flags(struct pci_dev *dev, u8 prop)
@@ -4376,6 +4381,9 @@ int pcie_flr(struct pci_dev *dev)
 
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
 
+	if (dev->imm_ready)
+		return 0;
+
 	/*
 	 * Per PCIe r4.0, sec 6.6.2, a device must complete an FLR within
 	 * 100ms, but may silently discard requests while the FLR is in
@@ -4417,6 +4425,9 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
 
 	pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
 
+	if (dev->imm_ready)
+		return 0;
+
 	/*
 	 * Per Advanced Capabilities for Conventional PCI ECN, 13 April 2006,
 	 * updated 27 July 2006; a device must complete an FLR within
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6925828f9f25..60da5d7d4310 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -325,6 +325,7 @@ struct pci_dev {
 	pci_power_t	current_state;	/* Current operating state. In ACPI,
 					   this is D0-D3, D0 being fully
 					   functional, and D3 being off. */
+	unsigned int	imm_ready:1;	/* Supports Immediate Readiness */
 	u8		pm_cap;		/* PM capability offset */
 	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
 					   can be generated */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index ee556ccc93f4..e1e9888c85e6 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -52,6 +52,7 @@
 #define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
 
 #define PCI_STATUS		0x06	/* 16 bits */
+#define  PCI_STATUS_IMM_READY	0x01	/* Immediate Readiness */
 #define  PCI_STATUS_INTERRUPT	0x08	/* Interrupt status */
 #define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
 #define  PCI_STATUS_66MHZ	0x20	/* Support 66 MHz PCI 2.1 bus */