summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-08-02 08:29:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-08-02 08:29:18 -0700
commitdd65b964922ed618a50866bd3895cf3ff646a5b9 (patch)
tree3f90270b1e944ea62480ba16701814b5c4651430
parent3a829d267e10812e3b2c2d656ba9fdc117ea6579 (diff)
parentbccd70a73db2061fc849928ad20a424afbaf3a45 (diff)
downloadlinux-stable-dd65b964922ed618a50866bd3895cf3ff646a5b9.tar.gz
linux-stable-dd65b964922ed618a50866bd3895cf3ff646a5b9.tar.bz2
linux-stable-dd65b964922ed618a50866bd3895cf3ff646a5b9.zip
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann: "This adds initial support for two SoC families that have been under review for a while. In both cases, the origonal idea was to have a minimally functional version, but we ended up leaving out the clk drivers that are still under review and will be merged through the corresponding subsystem tree. The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and based on the 32-bit NPCM7xx family but is now getting added to arch/arm64 as well. Sunplus SP7021, also known as Plus1, is a general-purpose System-in-Package design based on the 32-bit Cortex-A7 SoC on the main chip, plus an I/O chip and memory in the same" * tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE arm64: defconfig: Add Nuvoton NPCM family support arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add maintainer reset: npcm: Add NPCM8XX support dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: using syscon instead of device data ARM: dts: nuvoton: add reset syscon property dt-bindings: reset: npcm: add GCR syscon property dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-bindings: timer: npcm: Add npcm845 compatible string ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig ARM: sunplus: Add initial support for Sunplus SP7021 SoC irqchip: Add Sunplus SP7021 interrupt controller driver ...
-rw-r--r--Documentation/devicetree/bindings/arm/npcm/npcm.yaml7
-rw-r--r--Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml29
-rw-r--r--Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml49
-rw-r--r--Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml52
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml62
-rw-r--r--Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml10
-rw-r--r--Documentation/devicetree/bindings/reset/sunplus,reset.yaml38
-rw-r--r--Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml2
-rw-r--r--Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt3
-rw-r--r--MAINTAINERS19
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/dts/Makefile2
-rw-r--r--arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi1
-rw-r--r--arch/arm/boot/dts/sunplus-sp7021-achip.dtsi84
-rw-r--r--arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts30
-rw-r--r--arch/arm/boot/dts/sunplus-sp7021.dtsi310
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--arch/arm/configs/sp7021_defconfig59
-rw-r--r--arch/arm/mach-sunplus/Kconfig27
-rw-r--r--arch/arm/mach-sunplus/Makefile8
-rw-r--r--arch/arm/mach-sunplus/sp7021.c16
-rw-r--r--arch/arm64/Kconfig.platforms11
-rw-r--r--arch/arm64/boot/dts/Makefile1
-rw-r--r--arch/arm64/boot/dts/nuvoton/Makefile2
-rw-r--r--arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi170
-rw-r--r--arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts30
-rw-r--r--arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi76
-rw-r--r--arch/arm64/configs/defconfig3
-rw-r--r--drivers/irqchip/Kconfig9
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-sp7021-intc.c278
-rw-r--r--drivers/reset/Kconfig9
-rw-r--r--drivers/reset/Makefile1
-rw-r--r--drivers/reset/reset-npcm.c207
-rw-r--r--drivers/reset/reset-sunplus.c212
-rw-r--r--include/dt-bindings/clock/nuvoton,npcm845-clk.h49
-rw-r--r--include/dt-bindings/clock/sunplus,sp7021-clkc.h88
-rw-r--r--include/dt-bindings/reset/sunplus,sp7021-reset.h87
40 files changed, 2012 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
index 95e51378089c..43409e5721d5 100644
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
+++ b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
@@ -8,6 +8,7 @@ title: NPCM Platforms Device Tree Bindings
maintainers:
- Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ - Tomer Maimon <tmaimon77@gmail.com>
properties:
$nodename:
@@ -26,4 +27,10 @@ properties:
- nuvoton,npcm750-evb # NPCM750 evaluation board
- const: nuvoton,npcm750
+ - description: NPCM845 based boards
+ items:
+ - enum:
+ - nuvoton,npcm845-evb # NPCM845 evaluation board
+ - const: nuvoton,npcm845
+
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
index fcb211add7d3..94e72f25b331 100644
--- a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
+++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
@@ -8,6 +8,7 @@ title: Global Control Registers block in Nuvoton SoCs
maintainers:
- Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ - Tomer Maimon <tmaimon77@gmail.com>
description:
The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
@@ -20,6 +21,7 @@ properties:
- enum:
- nuvoton,wpcm450-gcr
- nuvoton,npcm750-gcr
+ - nuvoton,npcm845-gcr
- const: syscon
- const: simple-mfd
diff --git a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
new file mode 100644
index 000000000000..def7d0cfeb31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+ - qinjian <qinjian@cqplus1.com>
+
+description: |
+ ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+ Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ items:
+ - enum:
+ - sunplus,sp7021-achip
+ - sunplus,sp7021-demo-v3
+ - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
new file mode 100644
index 000000000000..771db2ddf026
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller Binding
+
+maintainers:
+ - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+ Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+ generates and supplies clocks to all modules within the BMC.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm845-clk
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+ description:
+ See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+ list of NPCM8XX clock IDs.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ ahb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@f0801000 {
+ compatible = "nuvoton,npcm845-clk";
+ reg = <0x0 0xf0801000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
new file mode 100644
index 000000000000..bcc14088220a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+ - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+ compatible:
+ const: sunplus,sp7021-clkc
+
+ reg:
+ maxItems: 3
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ extclk: osc0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "extclk";
+ };
+
+ clkc: clock-controller@9c000004 {
+ compatible = "sunplus,sp7021-clkc";
+ reg = <0x9c000004 0x28>,
+ <0x9c000200 0x44>,
+ <0x9c000268 0x08>;
+ clocks = <&extclk>;
+ #clock-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
new file mode 100644
index 000000000000..bd0021dbab0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+ - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+ compatible:
+ items:
+ - const: sunplus,sp7021-intc
+
+ reg:
+ maxItems: 2
+ description:
+ Specifies base physical address(s) and size of the controller regs.
+ The 1st region include type/polarity/priority/mask regs.
+ The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ The first cell is the IRQ number, the second cell is the trigger
+ type as defined in interrupt.txt in this directory.
+
+ interrupts:
+ maxItems: 2
+ description:
+ EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+ controller.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ intc: interrupt-controller@9c000780 {
+ compatible = "sunplus,sp7021-intc";
+ reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
index fa5e4ea6400e..d82e65e37cc0 100644
--- a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
@@ -11,7 +11,9 @@ maintainers:
properties:
compatible:
- const: nuvoton,npcm750-reset
+ enum:
+ - nuvoton,npcm750-reset # Poleg NPCM7XX SoC
+ - nuvoton,npcm845-reset # Arbel NPCM8XX SoC
reg:
maxItems: 1
@@ -19,6 +21,10 @@ properties:
'#reset-cells':
const: 2
+ nuvoton,sysgcr:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: a phandle to access GCR registers.
+
nuvoton,sw-reset-number:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
@@ -31,6 +37,7 @@ required:
- compatible
- reg
- '#reset-cells'
+ - nuvoton,sysgcr
additionalProperties: false
@@ -41,6 +48,7 @@ examples:
compatible = "nuvoton,npcm750-reset";
reg = <0xf0801000 0x70>;
#reset-cells = <2>;
+ nuvoton,sysgcr = <&gcr>;
nuvoton,sw-reset-number = <2>;
};
diff --git a/Documentation/devicetree/bindings/reset/sunplus,reset.yaml b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
new file mode 100644
index 000000000000..f24646ba9761
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/sunplus,reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC Reset Controller
+
+maintainers:
+ - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+ compatible:
+ const: sunplus,sp7021-reset
+
+ reg:
+ maxItems: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ rstc: reset@9c000054 {
+ compatible = "sunplus,sp7021-reset";
+ reg = <0x9c000054 0x28>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
index 0cbc26a72151..737af78ad70c 100644
--- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
@@ -8,12 +8,14 @@ title: Nuvoton NPCM7xx timer
maintainers:
- Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ - Tomer Maimon <tmaimon77@gmail.com>
properties:
compatible:
enum:
- nuvoton,wpcm450-timer # for Hermon WPCM450
- nuvoton,npcm750-timer # for Poleg NPCM750
+ - nuvoton,npcm845-timer # for Arbel NPCM845
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
index 9059f54dc023..866a958b8a2b 100644
--- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
@@ -6,7 +6,8 @@ expiry.
Required properties:
- compatible : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or
- "nuvoton,wpcm450-wdt" for WPCM450 (Hermon).
+ "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or
+ "nuvoton,npcm845-wdt" for NPCM845 (Arbel).
- reg : Offset and length of the register set for the device.
- interrupts : Contain the timer interrupt with flags for
falling edge.
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c8ac3444c88..09aa574db5f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2455,9 +2455,11 @@ F: Documentation/devicetree/bindings/*/*npcm*
F: Documentation/devicetree/bindings/arm/npcm/*
F: arch/arm/boot/dts/nuvoton-npcm*
F: arch/arm/mach-npcm/
+F: arch/arm64/boot/dts/nuvoton/
F: drivers/*/*npcm*
F: drivers/*/*/*npcm*
F: include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
+F: include/dt-bindings/clock/nuvoton,npcm845-clk.h
ARM/NUVOTON WPCM450 ARCHITECTURE
M: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
@@ -2832,6 +2834,23 @@ F: drivers/clocksource/armv7m_systick.c
N: stm32
N: stm
+ARM/SUNPLUS SP7021 SOC SUPPORT
+M: Qin Jian <qinjian@cqplus1.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for mon-subscribers)
+S: Maintained
+W: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+F: Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
+F: Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
+F: Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
+F: Documentation/devicetree/bindings/reset/sunplus,reset.yaml
+F: arch/arm/boot/dts/sunplus-sp7021*.dts*
+F: arch/arm/configs/sp7021_*defconfig
+F: arch/arm/mach-sunplus/
+F: drivers/irqchip/irq-sp7021-intc.c
+F: drivers/reset/reset-sunplus.c
+F: include/dt-bindings/clock/sunplus,sp7021-clkc.h
+F: include/dt-bindings/reset/sunplus,sp7021-reset.h
+
ARM/Synaptics SoC support
M: Jisheng Zhang <jszhang@kernel.org>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7630ba9cb6cc..cb37b17226e5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -588,6 +588,8 @@ source "arch/arm/mach-sti/Kconfig"
source "arch/arm/mach-stm32/Kconfig"
+source "arch/arm/mach-sunplus/Kconfig"
+
source "arch/arm/mach-sunxi/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c8e3633f5434..56f655deebb1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -215,6 +215,7 @@ machine-$(CONFIG_ARCH_RENESAS) += shmobile
machine-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
machine-$(CONFIG_ARCH_STM32) += stm32
+machine-$(CONFIG_ARCH_SUNPLUS) += sunplus
machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U8500) += ux500
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b327059c83da..05d8aef6e5d2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -79,6 +79,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-vinco.dtb
dtb-$(CONFIG_SOC_SAMA7G5) += \
at91-sama7g5ek.dtb
+dtb-$(CONFIG_SOC_SP7021) += \
+ sunplus-sp7021-demo-v3.dtb
dtb-$(CONFIG_ARCH_AXXIA) += \
axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += \
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
index 9633b50a9c6d..c7b5ef15b716 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -110,6 +110,7 @@
compatible = "nuvoton,npcm750-reset";
reg = <0xf0801000 0x70>;
#reset-cells = <2>;
+ nuvoton,sysgcr = <&gcr>;
};
clk: clock-controller@f0801000 {
diff --git a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
new file mode 100644
index 000000000000..493d32357e4e
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include "sunplus-sp7021.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "sunplus,sp7021-achip", "sunplus,sp7021";
+ model = "Sunplus SP7021 (CA7)";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <931000000>;
+ };
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ clock-frequency = <931000000>;
+ };
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ clock-frequency = <931000000>;
+ };
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ clock-frequency = <931000000>;
+ };
+ };
+
+ gic: interrupt-controller@9f101000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x9f101000 0x1000>,
+ <0x9f102000 0x2000>,
+ <0x9f104000 0x2000>,
+ <0x9f106000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <XTAL>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ soc@9c000000 {
+ intc: interrupt-controller@780 {
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
new file mode 100644
index 000000000000..d5c5ffc20565
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021 Demo V3 SBC board
+ *
+ * Copyright (C) Sunplus Technology Co.
+ */
+
+/dts-v1/;
+
+#include "sunplus-sp7021-achip.dtsi"
+
+/ {
+ compatible = "sunplus,sp7021-demo-v3", "sunplus,sp7021";
+ model = "Sunplus SP7021/CA7/Demo_V3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus-sp7021.dtsi
new file mode 100644
index 000000000000..7dc4ce3619c7
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021.dtsi
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include <dt-bindings/clock/sunplus,sp7021-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/sunplus,sp7021-reset.h>
+#include <dt-bindings/pinctrl/sppctl-sp7021.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define XTAL 27000000
+
+/ {
+ compatible = "sunplus,sp7021";
+ model = "Sunplus SP7021";
+
+ clocks {
+ extclk: osc0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <XTAL>;
+ clock-output-names = "extclk";
+ };
+ };
+
+ soc@9c000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x9c000000 0x400000>;
+ interrupt-parent = <&intc>;
+
+ clkc: clock-controller@4 {
+ compatible = "sunplus,sp7021-clkc";
+ reg = <0x4 0x28>,
+ <0x200 0x44>,
+ <0x268 0x04>;
+ clocks = <&extclk>;
+ #clock-cells = <1>;
+ };
+
+ intc: interrupt-controller@780 {
+ compatible = "sunplus,sp7021-intc";
+ reg = <0x780 0x80>, <0xa80 0x80>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ otp: otp@af00 {
+ compatible = "sunplus,sp7021-ocotp";
+ reg = <0xaf00 0x34>, <0xaf80 0x58>;
+ reg-names = "hb_gpio", "otprx";
+ clocks = <&clkc CLK_OTPRX>;
+ resets = <&rstc RST_OTPRX>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ therm_calib: thermal-calibration@14 {
+ reg = <0x14 0x3>;
+ };
+ disc_vol: disconnect-voltage@18 {
+ reg = <0x18 0x2>;
+ };
+ mac_addr0: mac-address0@34 {
+ reg = <0x34 0x6>;
+ };
+ mac_addr1: mac-address1@3a {
+ reg = <0x3a 0x6>;
+ };
+ };
+
+ pctl: pinctrl@100 {
+ compatible = "sunplus,sp7021-pctl";
+ reg = <0x100 0x100>,
+ <0x300 0x100>,
+ <0x32e4 0x1C>,
+ <0x80 0x20>;
+ reg-names = "moon2", "gpioxt", "first", "moon1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clkc CLK_GPIO>;
+ resets = <&rstc RST_GPIO>;
+
+ emac_pins: pinmux-emac-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+ SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+ SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+ SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+ SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+ SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+ SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+ SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+ SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+ SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0)
+ SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0)
+ SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0)
+ SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0)
+ SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0)
+ SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0)
+ SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0)
+ SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0)
+ >;
+ sunplus,zerofunc = <
+ MUXF_L2SW_LED_FLASH0
+ MUXF_L2SW_LED_FLASH1
+ MUXF_L2SW_LED_ON0
+ MUXF_L2SW_LED_ON1
+ MUXF_DAISY_MODE
+ >;
+ };
+
+ emmc_pins: pinmux-emmc-pins {
+ function = "CARD0_EMMC";
+ groups = "CARD0_EMMC";
+ };
+
+ leds_pins: pinmux-leds-pins {
+ sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >;
+ };
+
+ sdcard_pins: pinmux-sdcard-pins {
+ function = "SD_CARD";
+ groups = "SD_CARD";
+ sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+ };
+
+ spi0_pins: pinmux-spi0-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0)
+ SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0)
+ SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0)
+ SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0)
+ SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0)
+ >;
+ };
+
+ uart0_pins: pinmux-uart0-pins {
+ function = "UA0";
+ groups = "UA0";
+ };
+
+ uart1_pins: pinmux-uart1-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+ SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+ >;
+ };
+
+ uart2_pins: pinmux-uart2-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0)
+ SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0)
+ SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0)
+ SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0)
+ >;
+ };
+
+ uart4_pins: pinmux-uart4-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+ SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+ SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0)
+ SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0)
+ >;
+ };
+ };
+
+ rstc: reset@54 {
+ compatible = "sunplus,sp7021-reset";
+ reg = <0x54 0x28>;
+ #reset-cells = <1>;
+ };
+
+ rtc: rtc@3a00 {
+ compatible = "sunplus,sp7021-rtc";
+ reg = <0x3a00 0x80>;
+ reg-names = "rtc";
+ clocks = <&clkc CLK_RTC>;
+ resets = <&rstc RST_RTC>;
+ interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ spi_controller0: spi@2d80 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0x2d80 0x80>, <0x2e00 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+ <146 IRQ_TYPE_LEVEL_HIGH>,
+ <145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_0>;
+ resets = <&rstc RST_SPI_COMBO_0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>,
+ <&pctl 28 GPIO_ACTIVE_LOW>;
+ };
+
+ spi_controller1: spi@f480 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0xf480 0x80>, <0xf500 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_1>;
+ resets = <&rstc RST_SPI_COMBO_1>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+
+ spi_controller2: spi@f600 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0xf600 0x80>, <0xf680 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <70 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_2>;
+ resets = <&rstc RST_SPI_COMBO_2>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+
+ spi_controller3: spi@f780 {
+ compatible = "sunplus,sp7021-spi";
+ reg = <0xf780 0x80>, <0xf800 0x80>;
+ reg-names = "master", "slave";
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>,
+ <75 IRQ_TYPE_LEVEL_HIGH>,
+ <74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma_w", "master_risc", "slave_risc";
+ clocks = <&clkc CLK_SPI_COMBO_3>;
+ resets = <&rstc RST_SPI_COMBO_3>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+
+ uart0: serial@900 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x900 0x80>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA0>;
+ resets = <&rstc RST_UA0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ };
+
+ uart1: serial@980 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x980 0x80>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA1>;
+ resets = <&rstc RST_UA1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+ };
+
+ uart2: serial@800 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x800 0x80>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA2>;
+ resets = <&rstc RST_UA2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+ };
+
+ uart3: serial@880 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x880 0x80>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA3>;
+ resets = <&rstc RST_UA3>;
+ status = "disabled";
+ };
+
+ uart4: serial@8780 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x8780 0x80>;
+ interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLK_UA4>;
+ resets = <&rstc RST_UA4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+ system-led {
+ label = "system-led";
+ gpios = <&pctl 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index cff991cfe864..bcd7a431c66e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -96,6 +96,7 @@ CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
CONFIG_ARCH_STM32=y
+CONFIG_ARCH_SUNPLUS=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_UNIPHIER=y
diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig
new file mode 100644
index 000000000000..703b9aaa40f0
--- /dev/null
+++ b/arch/arm/configs/sp7021_defconfig
@@ -0,0 +1,59 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_ARCH_SUNPLUS=y
+# CONFIG_VDSO is not set
+CONFIG_SMP=y
+CONFIG_THUMB2_KERNEL=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_EXFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/mach-sunplus/Kconfig b/arch/arm/mach-sunplus/Kconfig
new file mode 100644
index 000000000000..926cde5e3cd9
--- /dev/null
+++ b/arch/arm/mach-sunplus/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+menuconfig ARCH_SUNPLUS
+ bool "Sunplus SoCs"
+ depends on ARCH_MULTI_V7
+ help
+ Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+ such as the Banana Pi BPI-F2S development board (and derivatives).
+ (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+ (<https://tibbo.com/store/plus1.html>)
+
+config SOC_SP7021
+ bool "Sunplus SP7021 SoC support"
+ depends on ARCH_SUNPLUS
+ default ARCH_SUNPLUS
+ select HAVE_ARM_ARCH_TIMER
+ select ARM_GIC
+ select ARM_PSCI
+ select PINCTRL
+ select PINCTRL_SPPCTL
+ select SERIAL_SUNPLUS
+ select SERIAL_SUNPLUS_CONSOLE
+ help
+ Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+ Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+ Ethernet, etc.), FPGA interface, chip-to-chip bus.
+ It is designed for industrial control.
diff --git a/arch/arm/mach-sunplus/Makefile b/arch/arm/mach-sunplus/Makefile
new file mode 100644
index 000000000000..d211de6af2db
--- /dev/null
+++ b/arch/arm/mach-sunplus/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-$(CONFIG_SOC_SP7021) += sp7021.o
diff --git a/arch/arm/mach-sunplus/sp7021.c b/arch/arm/mach-sunplus/sp7021.c
new file mode 100644
index 000000000000..774d0a5bd4eb
--- /dev/null
+++ b/arch/arm/mach-sunplus/sp7021.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+
+static const char *sp7021_compat[] __initconst = {
+ "sunplus,sp7021",
+ NULL
+};
+
+DT_MACHINE_START(SP7021_DT, "SP7021")
+ .dt_compat = sp7021_compat,
+MACHINE_END
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 1a8510a7ba8f..74e9e9de3759 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -214,6 +214,17 @@ config ARCH_MXC
This enables support for the ARMv8 based SoCs in the
NXP i.MX family.
+config ARCH_NPCM
+ bool "Nuvoton NPCM Architecture"
+ select PINCTRL
+ select GPIOLIB
+ select NPCM7XX_TIMER
+ select RESET_CONTROLLER
+ select MFD_SYSCON
+ help
+ General support for NPCM8xx BMC (Arbel).
+ Nuvoton NPCM8xx BMC based on the Cortex A35.
+
config ARCH_QCOM
bool "Qualcomm Platforms"
select GPIOLIB
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 1ba04e31a438..7b107fa7414b 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -19,6 +19,7 @@ subdir-y += lg
subdir-y += marvell
subdir-y += mediatek
subdir-y += microchip
+subdir-y += nuvoton
subdir-y += nvidia
subdir-y += qcom
subdir-y += realtek
diff --git a/arch/arm64/boot/dts/nuvoton/Makefile b/arch/arm64/boot/dts/nuvoton/Makefile
new file mode 100644
index 000000000000..a99dab90472a
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
new file mode 100644
index 000000000000..aa7aac8c3774
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include <dt-bindings/clock/nuvoton,npcm845-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ gcr: system-controller@f0800000 {
+ compatible = "nuvoton,npcm845-gcr", "syscon";
+ reg = <0x0 0xf0800000 0x0 0x1000>;
+ };
+
+ gic: interrupt-controller@dfff9000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xdfff9000 0x0 0x1000>,
+ <0x0 0xdfffa000 0x0 0x2000>,
+ <0x0 0xdfffc000 0x0 0x2000>,
+ <0x0 0xdfffe000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #address-cells = <0>;
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+ };
+ };
+ };
+
+ ahb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ rstc: reset-controller@f0801000 {
+ compatible = "nuvoton,npcm845-reset";
+ reg = <0x0 0xf0801000 0x0 0x78>;
+ #reset-cells = <2>;
+ nuvoton,sysgcr = <&gcr>;
+ };
+
+ clk: clock-controller@f0801000 {
+ compatible = "nuvoton,npcm845-clk";
+ #clock-cells = <1>;
+ reg = <0x0 0xf0801000 0x0 0x1000>;
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges = <0x0 0x0 0xf0000000 0x00300000>,
+ <0xfff00000 0x0 0xfff00000 0x00016000>;
+
+ timer0: timer@8000 {
+ compatible = "nuvoton,npcm845-timer";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x8000 0x1C>;
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ clock-names = "refclk";
+ };
+
+ serial0: serial@0 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x0 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial1: serial@1000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x1000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial2: serial@2000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x2000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial3: serial@3000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x3000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial4: serial@4000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x4000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial5: serial@5000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x5000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial6: serial@6000 {
+ compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+ reg = <0x6000 0x1000>;
+ clocks = <&clk NPCM8XX_CLK_UART>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@801c {
+ compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x801c 0x4>;
+ status = "disabled";
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ syscon = <&gcr>;
+ };
+
+ watchdog1: watchdog@901c {
+ compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x901c 0x4>;
+ status = "disabled";
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ syscon = <&gcr>;
+ };
+
+ watchdog2: watchdog@a01c {
+ compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xa01c 0x4>;
+ status = "disabled";
+ clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ syscon = <&gcr>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
new file mode 100644
index 000000000000..a5ab2bc0f835
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+/dts-v1/;
+#include "nuvoton-npcm845.dtsi"
+
+/ {
+ model = "Nuvoton npcm845 Development Board (Device Tree)";
+ compatible = "nuvoton,npcm845-evb", "nuvoton,npcm845";
+
+ aliases {
+ serial0 = &serial0;
+ };
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&watchdog1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
new file mode 100644
index 000000000000..12118b75c0e6
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include "nuvoton-common-npcm8xx.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x0>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x1>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x2>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x3>;
+ next-level-cache = <&l2>;
+ enable-method = "psci";
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a35-pmu";
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 96d06b4610c2..d5b2d2dd4904 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -49,6 +49,7 @@ CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_MXC=y
+CONFIG_ARCH_NPCM=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_ROCKCHIP=y
@@ -623,6 +624,7 @@ CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=m
CONFIG_BCM2835_WDT=y
CONFIG_BCM7038_WDT=m
+CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X_I2C=y
@@ -1030,6 +1032,7 @@ CONFIG_COMMON_CLK_FSL_SAI=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_VC5=y
+CONFIG_COMMON_CLK_NPCM8XX=y
CONFIG_COMMON_CLK_BD718XX=m
CONFIG_CLK_RASPBERRYPI=m
CONFIG_CLK_IMX8MM=y
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 2935912b195f..66b9fa408bf2 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -665,4 +665,13 @@ config MCHP_EIC
help
Support for Microchip External Interrupt Controller.
+config SUNPLUS_SP7021_INTC
+ bool "Sunplus SP7021 interrupt controller" if COMPILE_TEST
+ default SOC_SP7021
+ help
+ Support for the Sunplus SP7021 Interrupt Controller IP core.
+ SP7021 SoC has 2 Chips: C-Chip & P-Chip. This is used as a
+ chained controller, routing all interrupt source in P-Chip to
+ the primary controller on C-Chip.
+
endmenu
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 86450eb11398..b6acbca2248b 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -119,3 +119,4 @@ obj-$(CONFIG_WPCM450_AIC) += irq-wpcm450-aic.o
obj-$(CONFIG_IRQ_IDT3243X) += irq-idt3243x.o
obj-$(CONFIG_APPLE_AIC) += irq-apple-aic.o
obj-$(CONFIG_MCHP_EIC) += irq-mchp-eic.o
+obj-$(CONFIG_SUNPLUS_SP7021_INTC) += irq-sp7021-intc.o
diff --git a/drivers/irqchip/irq-sp7021-intc.c b/drivers/irqchip/irq-sp7021-intc.c
new file mode 100644
index 000000000000..bed78d1def3d
--- /dev/null
+++ b/drivers/irqchip/irq-sp7021-intc.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define SP_INTC_HWIRQ_MIN 0
+#define SP_INTC_HWIRQ_MAX 223
+
+#define SP_INTC_NR_IRQS (SP_INTC_HWIRQ_MAX - SP_INTC_HWIRQ_MIN + 1)
+#define SP_INTC_NR_GROUPS DIV_ROUND_UP(SP_INTC_NR_IRQS, 32)
+#define SP_INTC_REG_SIZE (SP_INTC_NR_GROUPS * 4)
+
+/* REG_GROUP_0 regs */
+#define REG_INTR_TYPE (sp_intc.g0)
+#define REG_INTR_POLARITY (REG_INTR_TYPE + SP_INTC_REG_SIZE)
+#define REG_INTR_PRIORITY (REG_INTR_POLARITY + SP_INTC_REG_SIZE)
+#define REG_INTR_MASK (REG_INTR_PRIORITY + SP_INTC_REG_SIZE)
+
+/* REG_GROUP_1 regs */
+#define REG_INTR_CLEAR (sp_intc.g1)
+#define REG_MASKED_EXT1 (REG_INTR_CLEAR + SP_INTC_REG_SIZE)
+#define REG_MASKED_EXT0 (REG_MASKED_EXT1 + SP_INTC_REG_SIZE)
+#define REG_INTR_GROUP (REG_INTR_CLEAR + 31 * 4)
+
+#define GROUP_MASK (BIT(SP_INTC_NR_GROUPS) - 1)
+#define GROUP_SHIFT_EXT1 (0)
+#define GROUP_SHIFT_EXT0 (8)
+
+/*
+ * When GPIO_INT0~7 set to edge trigger, doesn't work properly.
+ * WORKAROUND: change it to level trigger, and toggle the polarity
+ * at ACK/Handler to make the HW work.
+ */
+#define GPIO_INT0_HWIRQ 120
+#define GPIO_INT7_HWIRQ 127
+#define IS_GPIO_INT(irq) \
+({ \
+ u32 i = irq; \
+ (i >= GPIO_INT0_HWIRQ) && (i <= GPIO_INT7_HWIRQ); \
+})
+
+/* index of states */
+enum {
+ _IS_EDGE = 0,
+ _IS_LOW,
+ _IS_ACTIVE
+};
+
+#define STATE_BIT(irq, idx) (((irq) - GPIO_INT0_HWIRQ) * 3 + (idx))
+#define ASSIGN_STATE(irq, idx, v) assign_bit(STATE_BIT(irq, idx), sp_intc.states, v)
+#define TEST_STATE(irq, idx) test_bit(STATE_BIT(irq, idx), sp_intc.states)
+
+static struct sp_intctl {
+ /*
+ * REG_GROUP_0: include type/polarity/priority/mask regs.
+ * REG_GROUP_1: include clear/masked_ext0/masked_ext1/group regs.
+ */
+ void __iomem *g0; // REG_GROUP_0 base
+ void __iomem *g1; // REG_GROUP_1 base
+
+ struct irq_domain *domain;
+ raw_spinlock_t lock;
+
+ /*
+ * store GPIO_INT states
+ * each interrupt has 3 states: is_edge, is_low, is_active
+ */
+ DECLARE_BITMAP(states, (GPIO_INT7_HWIRQ - GPIO_INT0_HWIRQ + 1) * 3);
+} sp_intc;
+
+static struct irq_chip sp_intc_chip;
+
+static void sp_intc_assign_bit(u32 hwirq, void __iomem *base, bool value)
+{
+ u32 offset, mask;
+ unsigned long flags;
+ void __iomem *reg;
+
+ offset = (hwirq / 32) * 4;
+ reg = base + offset;
+
+ raw_spin_lock_irqsave(&sp_intc.lock, flags);
+ mask = readl_relaxed(reg);
+ if (value)
+ mask |= BIT(hwirq % 32);
+ else
+ mask &= ~BIT(hwirq % 32);
+ writel_relaxed(mask, reg);
+ raw_spin_unlock_irqrestore(&sp_intc.lock, flags);
+}
+
+static void sp_intc_ack_irq(struct irq_data *d)
+{
+ u32 hwirq = d->hwirq;
+
+ if (unlikely(IS_GPIO_INT(hwirq) && TEST_STATE(hwirq, _IS_EDGE))) { // WORKAROUND
+ sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, !TEST_STATE(hwirq, _IS_LOW));
+ ASSIGN_STATE(hwirq, _IS_ACTIVE, true);
+ }
+
+ sp_intc_assign_bit(hwirq, REG_INTR_CLEAR, 1);
+}
+
+static void sp_intc_mask_irq(struct irq_data *d)
+{
+ sp_intc_assign_bit(d->hwirq, REG_INTR_MASK, 0);
+}
+
+static void sp_intc_unmask_irq(struct irq_data *d)
+{
+ sp_intc_assign_bit(d->hwirq, REG_INTR_MASK, 1);
+}
+
+static int sp_intc_set_type(struct irq_data *d, unsigned int type)
+{
+ u32 hwirq = d->hwirq;
+ bool is_edge = !(type & IRQ_TYPE_LEVEL_MASK);
+ bool is_low = (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING);
+
+ irq_set_handler_locked(d, is_edge ? handle_edge_irq : handle_level_irq);
+
+ if (unlikely(IS_GPIO_INT(hwirq) && is_edge)) { // WORKAROUND
+ /* store states */
+ ASSIGN_STATE(hwirq, _IS_EDGE, is_edge);
+ ASSIGN_STATE(hwirq, _IS_LOW, is_low);
+ ASSIGN_STATE(hwirq, _IS_ACTIVE, false);
+ /* change to level */
+ is_edge = false;
+ }
+
+ sp_intc_assign_bit(hwirq, REG_INTR_TYPE, is_edge);
+ sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, is_low);
+
+ return 0;
+}
+
+static int sp_intc_get_ext_irq(int ext_num)
+{
+ void __iomem *base = ext_num ? REG_MASKED_EXT1 : REG_MASKED_EXT0;
+ u32 shift = ext_num ? GROUP_SHIFT_EXT1 : GROUP_SHIFT_EXT0;
+ u32 groups;
+ u32 pending_group;
+ u32 group;
+ u32 pending_irq;
+
+ groups = readl_relaxed(REG_INTR_GROUP);
+ pending_group = (groups >> shift) & GROUP_MASK;
+ if (!pending_group)
+ return -1;
+
+ group = fls(pending_group) - 1;
+ pending_irq = readl_relaxed(base + group * 4);
+ if (!pending_irq)
+ return -1;
+
+ return (group * 32) + fls(pending_irq) - 1;
+}
+
+static void sp_intc_handle_ext_cascaded(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ int ext_num = (uintptr_t)irq_desc_get_handler_data(desc);
+ int hwirq;
+
+ chained_irq_enter(chip, desc);
+
+ while ((hwirq = sp_intc_get_ext_irq(ext_num)) >= 0) {
+ if (unlikely(IS_GPIO_INT(hwirq) && TEST_STATE(hwirq, _IS_ACTIVE))) { // WORKAROUND
+ ASSIGN_STATE(hwirq, _IS_ACTIVE, false);
+ sp_intc_assign_bit(hwirq, REG_INTR_POLARITY, TEST_STATE(hwirq, _IS_LOW));
+ } else {
+ generic_handle_domain_irq(sp_intc.domain, hwirq);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip sp_intc_chip = {
+ .name = "sp_intc",
+ .irq_ack = sp_intc_ack_irq,
+ .irq_mask = sp_intc_mask_irq,
+ .irq_unmask = sp_intc_unmask_irq,
+ .irq_set_type = sp_intc_set_type,
+};
+
+static int sp_intc_irq_domain_map(struct irq_domain *domain,
+ unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &sp_intc_chip, handle_level_irq);
+ irq_set_chip_data(irq, &sp_intc_chip);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops sp_intc_dm_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = sp_intc_irq_domain_map,
+};
+
+static int sp_intc_irq_map(struct device_node *node, int i)
+{
+ unsigned int irq;
+
+ irq = irq_of_parse_and_map(node, i);
+ if (!irq)
+ return -ENOENT;
+
+ irq_set_chained_handler_and_data(irq, sp_intc_handle_ext_cascaded, (void *)(uintptr_t)i);
+
+ return 0;
+}
+
+static int __init sp_intc_init_dt(struct device_node *node, struct device_node *parent)
+{
+ int i, ret;
+
+ sp_intc.g0 = of_iomap(node, 0);
+ if (!sp_intc.g0)
+ return -ENXIO;
+
+ sp_intc.g1 = of_iomap(node, 1);
+ if (!sp_intc.g1) {
+ ret = -ENXIO;
+ goto out_unmap0;
+ }
+
+ ret = sp_intc_irq_map(node, 0); // EXT_INT0
+ if (ret)
+ goto out_unmap1;
+
+ ret = sp_intc_irq_map(node, 1); // EXT_INT1
+ if (ret)
+ goto out_unmap1;
+
+ /* initial regs */
+ for (i = 0; i < SP_INTC_NR_GROUPS; i++) {
+ /* all mask */
+ writel_relaxed(0, REG_INTR_MASK + i * 4);
+ /* all edge */
+ writel_relaxed(~0, REG_INTR_TYPE + i * 4);
+ /* all high-active */
+ writel_relaxed(0, REG_INTR_POLARITY + i * 4);
+ /* all EXT_INT0 */
+ writel_relaxed(~0, REG_INTR_PRIORITY + i * 4);
+ /* all clear */
+ writel_relaxed(~0, REG_INTR_CLEAR + i * 4);
+ }
+
+ sp_intc.domain = irq_domain_add_linear(node, SP_INTC_NR_IRQS,
+ &sp_intc_dm_ops, &sp_intc);
+ if (!sp_intc.domain) {
+ ret = -ENOMEM;
+ goto out_unmap1;
+ }
+
+ raw_spin_lock_init(&sp_intc.lock);
+
+ return 0;
+
+out_unmap1:
+ iounmap(sp_intc.g1);
+out_unmap0:
+ iounmap(sp_intc.g0);
+
+ return ret;
+}
+
+IRQCHIP_DECLARE(sp_intc, "sunplus,sp7021-intc", sp_intc_init_dt);
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 93c8d07ee328..48d94649ea82 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -231,6 +231,15 @@ config RESET_STARFIVE_JH7100
help
This enables the reset controller driver for the StarFive JH7100 SoC.
+config RESET_SUNPLUS
+ bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
+ default ARCH_SUNPLUS
+ help
+ This enables the reset driver support for Sunplus SoCs.
+ The reset lines that can be asserted and deasserted by toggling bits
+ in a contiguous, exclusive register space. The register is HIWORD_MASKED,
+ which means each register holds 16 reset lines.
+
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
default ARCH_SUNXI
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index a80a9c4008a7..3ff378f43348 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
diff --git a/drivers/reset/reset-npcm.c b/drivers/reset/reset-npcm.c
index 2ea4d3136e15..24c55efa98e5 100644
--- a/drivers/reset/reset-npcm.c
+++ b/drivers/reset/reset-npcm.c
@@ -17,13 +17,20 @@
/* NPCM7xx GCR registers */
#define NPCM_MDLR_OFFSET 0x7C
-#define NPCM_MDLR_USBD0 BIT(9)
-#define NPCM_MDLR_USBD1 BIT(8)
-#define NPCM_MDLR_USBD2_4 BIT(21)
-#define NPCM_MDLR_USBD5_9 BIT(22)
+#define NPCM7XX_MDLR_USBD0 BIT(9)
+#define NPCM7XX_MDLR_USBD1 BIT(8)
+#define NPCM7XX_MDLR_USBD2_4 BIT(21)
+#define NPCM7XX_MDLR_USBD5_9 BIT(22)
+
+/* NPCM8xx MDLR bits */
+#define NPCM8XX_MDLR_USBD0_3 BIT(9)
+#define NPCM8XX_MDLR_USBD4_7 BIT(22)
+#define NPCM8XX_MDLR_USBD8 BIT(24)
+#define NPCM8XX_MDLR_USBD9 BIT(21)
#define NPCM_USB1PHYCTL_OFFSET 0x140
#define NPCM_USB2PHYCTL_OFFSET 0x144
+#define NPCM_USB3PHYCTL_OFFSET 0x148
#define NPCM_USBXPHYCTL_RS BIT(28)
/* NPCM7xx Reset registers */
@@ -49,12 +56,38 @@
#define NPCM_IPSRST3_USBPHY1 BIT(24)
#define NPCM_IPSRST3_USBPHY2 BIT(25)
+#define NPCM_IPSRST4 0x74
+#define NPCM_IPSRST4_USBPHY3 BIT(25)
+#define NPCM_IPSRST4_USB_HOST2 BIT(31)
+
#define NPCM_RC_RESETS_PER_REG 32
#define NPCM_MASK_RESETS GENMASK(4, 0)
+enum {
+ BMC_NPCM7XX = 0,
+ BMC_NPCM8XX,
+};
+
+static const u32 npxm7xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3};
+static const u32 npxm8xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3,
+ NPCM_IPSRST4};
+
+struct npcm_reset_info {
+ u32 bmc_id;
+ u32 num_ipsrst;
+ const u32 *ipsrst;
+};
+
+static const struct npcm_reset_info npxm7xx_reset_info[] = {
+ {.bmc_id = BMC_NPCM7XX, .num_ipsrst = 3, .ipsrst = npxm7xx_ipsrst}};
+static const struct npcm_reset_info npxm8xx_reset_info[] = {
+ {.bmc_id = BMC_NPCM8XX, .num_ipsrst = 4, .ipsrst = npxm8xx_ipsrst}};
+
struct npcm_rc_data {
struct reset_controller_dev rcdev;
struct notifier_block restart_nb;
+ const struct npcm_reset_info *info;
+ struct regmap *gcr_regmap;
u32 sw_reset_number;
void __iomem *base;
spinlock_t lock;
@@ -120,14 +153,24 @@ static int npcm_rc_status(struct reset_controller_dev *rcdev,
static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
+ struct npcm_rc_data *rc = to_rc_data(rcdev);
unsigned int offset, bit;
+ bool offset_found = false;
+ int off_num;
offset = reset_spec->args[0];
- if (offset != NPCM_IPSRST1 && offset != NPCM_IPSRST2 &&
- offset != NPCM_IPSRST3) {
+ for (off_num = 0 ; off_num < rc->info->num_ipsrst ; off_num++) {
+ if (offset == rc->info->ipsrst[off_num]) {
+ offset_found = true;
+ break;
+ }
+ }
+
+ if (!offset_found) {
dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset);
return -EINVAL;
}
+
bit = reset_spec->args[1];
if (bit >= NPCM_RC_RESETS_PER_REG) {
dev_err(rcdev->dev, "Error reset number (%d)\n", bit);
@@ -138,45 +181,29 @@ static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
}
static const struct of_device_id npcm_rc_match[] = {
- { .compatible = "nuvoton,npcm750-reset",
- .data = (void *)"nuvoton,npcm750-gcr" },
+ { .compatible = "nuvoton,npcm750-reset", .data = &npxm7xx_reset_info},
+ { .compatible = "nuvoton,npcm845-reset", .data = &npxm8xx_reset_info},
{ }
};
-/*
- * The following procedure should be observed in USB PHY, USB device and
- * USB host initialization at BMC boot
- */
-static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+static void npcm_usb_reset_npcm7xx(struct npcm_rc_data *rc)
{
u32 mdlr, iprst1, iprst2, iprst3;
- struct device *dev = &pdev->dev;
- struct regmap *gcr_regmap;
u32 ipsrst1_bits = 0;
u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
u32 ipsrst3_bits = 0;
- const char *gcr_dt;
-
- gcr_dt = (const char *)
- of_match_device(dev->driver->of_match_table, dev)->data;
-
- gcr_regmap = syscon_regmap_lookup_by_compatible(gcr_dt);
- if (IS_ERR(gcr_regmap)) {
- dev_err(&pdev->dev, "Failed to find %s\n", gcr_dt);
- return PTR_ERR(gcr_regmap);
- }
/* checking which USB device is enabled */
- regmap_read(gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
- if (!(mdlr & NPCM_MDLR_USBD0))
+ regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+ if (!(mdlr & NPCM7XX_MDLR_USBD0))
ipsrst3_bits |= NPCM_IPSRST3_USBD0;
- if (!(mdlr & NPCM_MDLR_USBD1))
+ if (!(mdlr & NPCM7XX_MDLR_USBD1))
ipsrst1_bits |= NPCM_IPSRST1_USBD1;
- if (!(mdlr & NPCM_MDLR_USBD2_4))
+ if (!(mdlr & NPCM7XX_MDLR_USBD2_4))
ipsrst1_bits |= (NPCM_IPSRST1_USBD2 |
NPCM_IPSRST1_USBD3 |
NPCM_IPSRST1_USBD4);
- if (!(mdlr & NPCM_MDLR_USBD0)) {
+ if (!(mdlr & NPCM7XX_MDLR_USBD0)) {
ipsrst1_bits |= (NPCM_IPSRST1_USBD5 |
NPCM_IPSRST1_USBD6);
ipsrst3_bits |= (NPCM_IPSRST3_USBD7 |
@@ -199,9 +226,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
writel(iprst3, rc->base + NPCM_IPSRST3);
/* clear USB PHY RS bit */
- regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, 0);
- regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, 0);
/* deassert reset USB PHY */
@@ -211,19 +238,131 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
udelay(50);
/* set USB PHY RS bit */
- regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+
+ /* deassert reset USB devices*/
+ iprst1 &= ~ipsrst1_bits;
+ iprst2 &= ~ipsrst2_bits;
+ iprst3 &= ~ipsrst3_bits;
+
+ writel(iprst1, rc->base + NPCM_IPSRST1);
+ writel(iprst2, rc->base + NPCM_IPSRST2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+}
+
+static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc)
+{
+ u32 mdlr, iprst1, iprst2, iprst3, iprst4;
+ u32 ipsrst1_bits = 0;
+ u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
+ u32 ipsrst3_bits = 0;
+ u32 ipsrst4_bits = NPCM_IPSRST4_USB_HOST2 | NPCM_IPSRST4_USBPHY3;
+
+ /* checking which USB device is enabled */
+ regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+ if (!(mdlr & NPCM8XX_MDLR_USBD0_3)) {
+ ipsrst3_bits |= NPCM_IPSRST3_USBD0;
+ ipsrst1_bits |= (NPCM_IPSRST1_USBD1 |
+ NPCM_IPSRST1_USBD2 |
+ NPCM_IPSRST1_USBD3);
+ }
+ if (!(mdlr & NPCM8XX_MDLR_USBD4_7)) {
+ ipsrst1_bits |= (NPCM_IPSRST1_USBD4 |
+ NPCM_IPSRST1_USBD5 |
+ NPCM_IPSRST1_USBD6);
+ ipsrst3_bits |= NPCM_IPSRST3_USBD7;
+ }
+
+ if (!(mdlr & NPCM8XX_MDLR_USBD8))
+ ipsrst3_bits |= NPCM_IPSRST3_USBD8;
+ if (!(mdlr & NPCM8XX_MDLR_USBD9))
+ ipsrst3_bits |= NPCM_IPSRST3_USBD9;
+
+ /* assert reset USB PHY and USB devices */
+ iprst1 = readl(rc->base + NPCM_IPSRST1);
+ iprst2 = readl(rc->base + NPCM_IPSRST2);
+ iprst3 = readl(rc->base + NPCM_IPSRST3);
+ iprst4 = readl(rc->base + NPCM_IPSRST4);
+
+ iprst1 |= ipsrst1_bits;
+ iprst2 |= ipsrst2_bits;
+ iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 |
+ NPCM_IPSRST3_USBPHY2);
+ iprst2 |= ipsrst4_bits;
+
+ writel(iprst1, rc->base + NPCM_IPSRST1);
+ writel(iprst2, rc->base + NPCM_IPSRST2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+
+ /* clear USB PHY RS bit */
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+
+ /* deassert reset USB PHY */
+ iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+ iprst4 &= ~NPCM_IPSRST4_USBPHY3;
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+
+ /* set USB PHY RS bit */
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
- regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
/* deassert reset USB devices*/
iprst1 &= ~ipsrst1_bits;
iprst2 &= ~ipsrst2_bits;
iprst3 &= ~ipsrst3_bits;
+ iprst4 &= ~ipsrst4_bits;
writel(iprst1, rc->base + NPCM_IPSRST1);
writel(iprst2, rc->base + NPCM_IPSRST2);
writel(iprst3, rc->base + NPCM_IPSRST3);
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+}
+
+/*
+ * The following procedure should be observed in USB PHY, USB device and
+ * USB host initialization at BMC boot
+ */
+static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+{
+ struct device *dev = &pdev->dev;
+
+ rc->gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr");
+ if (IS_ERR(rc->gcr_regmap)) {
+ dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n");
+ dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n");
+ rc->gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
+ if (IS_ERR(rc->gcr_regmap)) {
+ dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr");
+ return PTR_ERR(rc->gcr_regmap);
+ }
+ }
+
+ rc->info = (const struct npcm_reset_info *)
+ of_match_device(dev->driver->of_match_table, dev)->data;
+ switch (rc->info->bmc_id) {
+ case BMC_NPCM7XX:
+ npcm_usb_reset_npcm7xx(rc);
+ break;
+ case BMC_NPCM8XX:
+ npcm_usb_reset_npcm8xx(rc);
+ break;
+ default:
+ return -ENODEV;
+ }
return 0;
}
diff --git a/drivers/reset/reset-sunplus.c b/drivers/reset/reset-sunplus.c
new file mode 100644
index 000000000000..2f23ecaa7b98
--- /dev/null
+++ b/drivers/reset/reset-sunplus.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * SP7021 reset driver
+ *
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reboot.h>
+
+/* HIWORD_MASK_REG BITS */
+#define BITS_PER_HWM_REG 16
+
+/* resets HW info: reg_index_shift */
+static const u32 sp_resets[] = {
+/* SP7021: mo_reset0 ~ mo_reset9 */
+ 0x00,
+ 0x02,
+ 0x03,
+ 0x04,
+ 0x05,
+ 0x06,
+ 0x07,
+ 0x08,
+ 0x09,
+ 0x0a,
+ 0x0b,
+ 0x0d,
+ 0x0e,
+ 0x0f,
+ 0x10,
+ 0x12,
+ 0x14,
+ 0x15,
+ 0x16,
+ 0x17,
+ 0x18,
+ 0x19,
+ 0x1a,
+ 0x1b,
+ 0x1c,
+ 0x1d,
+ 0x1e,
+ 0x1f,
+ 0x20,
+ 0x21,
+ 0x22,
+ 0x23,
+ 0x24,
+ 0x25,
+ 0x26,
+ 0x2a,
+ 0x2b,
+ 0x2d,
+ 0x2e,
+ 0x30,
+ 0x31,
+ 0x32,
+ 0x33,
+ 0x3d,
+ 0x3e,
+ 0x3f,
+ 0x42,
+ 0x44,
+ 0x4b,
+ 0x4c,
+ 0x4d,
+ 0x4e,
+ 0x4f,
+ 0x50,
+ 0x55,
+ 0x60,
+ 0x61,
+ 0x6a,
+ 0x6f,
+ 0x70,
+ 0x73,
+ 0x74,
+ 0x86,
+ 0x8a,
+ 0x8b,
+ 0x8d,
+ 0x8e,
+ 0x8f,
+ 0x90,
+ 0x92,
+ 0x93,
+ 0x94,
+ 0x95,
+ 0x96,
+ 0x97,
+ 0x98,
+ 0x99,
+};
+
+struct sp_reset {
+ struct reset_controller_dev rcdev;
+ struct notifier_block notifier;
+ void __iomem *base;
+};
+
+static inline struct sp_reset *to_sp_reset(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct sp_reset, rcdev);
+}
+
+static int sp_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct sp_reset *reset = to_sp_reset(rcdev);
+ int index = sp_resets[id] / BITS_PER_HWM_REG;
+ int shift = sp_resets[id] % BITS_PER_HWM_REG;
+ u32 val;
+
+ val = (1 << (16 + shift)) | (assert << shift);
+ writel(val, reset->base + (index * 4));
+
+ return 0;
+}
+
+static int sp_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return sp_reset_update(rcdev, id, true);
+}
+
+static int sp_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return sp_reset_update(rcdev, id, false);
+}
+
+static int sp_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sp_reset *reset = to_sp_reset(rcdev);
+ int index = sp_resets[id] / BITS_PER_HWM_REG;
+ int shift = sp_resets[id] % BITS_PER_HWM_REG;
+ u32 reg;
+
+ reg = readl(reset->base + (index * 4));
+
+ return !!(reg & BIT(shift));
+}
+
+static const struct reset_control_ops sp_reset_ops = {
+ .assert = sp_reset_assert,
+ .deassert = sp_reset_deassert,
+ .status = sp_reset_status,
+};
+
+static int sp_restart(struct notifier_block *nb, unsigned long mode,
+ void *cmd)
+{
+ struct sp_reset *reset = container_of(nb, struct sp_reset, notifier);
+
+ sp_reset_assert(&reset->rcdev, 0);
+ sp_reset_deassert(&reset->rcdev, 0);
+
+ return NOTIFY_DONE;
+}
+
+static int sp_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sp_reset *reset;
+ struct resource *res;
+ int ret;
+
+ reset = devm_kzalloc(dev, sizeof(*reset), GFP_KERNEL);
+ if (!reset)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reset->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reset->base))
+ return PTR_ERR(reset->base);
+
+ reset->rcdev.ops = &sp_reset_ops;
+ reset->rcdev.owner = THIS_MODULE;
+ reset->rcdev.of_node = dev->of_node;
+ reset->rcdev.nr_resets = resource_size(res) / 4 * BITS_PER_HWM_REG;
+
+ ret = devm_reset_controller_register(dev, &reset->rcdev);
+ if (ret)
+ return ret;
+
+ reset->notifier.notifier_call = sp_restart;
+ reset->notifier.priority = 192;
+
+ return register_restart_handler(&reset->notifier);
+}
+
+static const struct of_device_id sp_reset_dt_ids[] = {
+ {.compatible = "sunplus,sp7021-reset",},
+ { /* sentinel */ },
+};
+
+static struct platform_driver sp_reset_driver = {
+ .probe = sp_reset_probe,
+ .driver = {
+ .name = "sunplus-reset",
+ .of_match_table = sp_reset_dt_ids,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(sp_reset_driver);
diff --git a/include/dt-bindings/clock/nuvoton,npcm845-clk.h b/include/dt-bindings/clock/nuvoton,npcm845-clk.h
new file mode 100644
index 000000000000..e5cce08b00e1
--- /dev/null
+++ b/include/dt-bindings/clock/nuvoton,npcm845-clk.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021 Nuvoton Technologies.
+ * Author: Tomer Maimon <tomer.maimon@nuvoton.com>
+ *
+ * Device Tree binding constants for NPCM8XX clock controller.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NPCM8XX_H
+#define __DT_BINDINGS_CLOCK_NPCM8XX_H
+
+#define NPCM8XX_CLK_CPU 0
+#define NPCM8XX_CLK_GFX_PIXEL 1
+#define NPCM8XX_CLK_MC 2
+#define NPCM8XX_CLK_ADC 3
+#define NPCM8XX_CLK_AHB 4
+#define NPCM8XX_CLK_TIMER 5
+#define NPCM8XX_CLK_UART 6
+#define NPCM8XX_CLK_UART2 7
+#define NPCM8XX_CLK_MMC 8
+#define NPCM8XX_CLK_SPI3 9
+#define NPCM8XX_CLK_PCI 10
+#define NPCM8XX_CLK_AXI 11
+#define NPCM8XX_CLK_APB4 12
+#define NPCM8XX_CLK_APB3 13
+#define NPCM8XX_CLK_APB2 14
+#define NPCM8XX_CLK_APB1 15
+#define NPCM8XX_CLK_APB5 16
+#define NPCM8XX_CLK_CLKOUT 17
+#define NPCM8XX_CLK_GFX 18
+#define NPCM8XX_CLK_SU 19
+#define NPCM8XX_CLK_SU48 20
+#define NPCM8XX_CLK_SDHC 21
+#define NPCM8XX_CLK_SPI0 22
+#define NPCM8XX_CLK_SPI1 23
+#define NPCM8XX_CLK_SPIX 24
+#define NPCM8XX_CLK_RG 25
+#define NPCM8XX_CLK_RCP 26
+#define NPCM8XX_CLK_PRE_ADC 27
+#define NPCM8XX_CLK_ATB 28
+#define NPCM8XX_CLK_PRE_CLK 29
+#define NPCM8XX_CLK_TH 30
+#define NPCM8XX_CLK_REFCLK 31
+#define NPCM8XX_CLK_SYSBYPCK 32
+#define NPCM8XX_CLK_MCBYPCK 33
+
+#define NPCM8XX_NUM_CLOCKS (NPCM8XX_CLK_MCBYPCK + 1)
+
+#endif
diff --git a/include/dt-bindings/clock/sunplus,sp7021-clkc.h b/include/dt-bindings/clock/sunplus,sp7021-clkc.h
new file mode 100644
index 000000000000..cd84321eb2b5
--- /dev/null
+++ b/include/dt-bindings/clock/sunplus,sp7021-clkc.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#ifndef _DT_BINDINGS_CLOCK_SUNPLUS_SP7021_H
+#define _DT_BINDINGS_CLOCK_SUNPLUS_SP7021_H
+
+/* gates */
+#define CLK_RTC 0
+#define CLK_OTPRX 1
+#define CLK_NOC 2
+#define CLK_BR 3
+#define CLK_SPIFL 4
+#define CLK_PERI0 5
+#define CLK_PERI1 6
+#define CLK_STC0 7
+#define CLK_STC_AV0 8
+#define CLK_STC_AV1 9
+#define CLK_STC_AV2 10
+#define CLK_UA0 11
+#define CLK_UA1 12
+#define CLK_UA2 13
+#define CLK_UA3 14
+#define CLK_UA4 15
+#define CLK_HWUA 16
+#define CLK_DDC0 17
+#define CLK_UADMA 18
+#define CLK_CBDMA0 19
+#define CLK_CBDMA1 20
+#define CLK_SPI_COMBO_0 21
+#define CLK_SPI_COMBO_1 22
+#define CLK_SPI_COMBO_2 23
+#define CLK_SPI_COMBO_3 24
+#define CLK_AUD 25
+#define CLK_USBC0 26
+#define CLK_USBC1 27
+#define CLK_UPHY0 28
+#define CLK_UPHY1 29
+#define CLK_I2CM0 30
+#define CLK_I2CM1 31
+#define CLK_I2CM2 32
+#define CLK_I2CM3 33
+#define CLK_PMC 34
+#define CLK_CARD_CTL0 35
+#define CLK_CARD_CTL1 36
+#define CLK_CARD_CTL4 37
+#define CLK_BCH 38
+#define CLK_DDFCH 39
+#define CLK_CSIIW0 40
+#define CLK_CSIIW1 41
+#define CLK_MIPICSI0 42
+#define CLK_MIPICSI1 43
+#define CLK_HDMI_TX 44
+#define CLK_VPOST 45
+#define CLK_TGEN 46
+#define CLK_DMIX 47
+#define CLK_TCON 48
+#define CLK_GPIO 49
+#define CLK_MAILBOX 50
+#define CLK_SPIND 51
+#define CLK_I2C2CBUS 52
+#define CLK_SEC 53
+#define CLK_DVE 54
+#define CLK_GPOST0 55
+#define CLK_OSD0 56
+#define CLK_DISP_PWM 57
+#define CLK_UADBG 58
+#define CLK_FIO_CTL 59
+#define CLK_FPGA 60
+#define CLK_L2SW 61
+#define CLK_ICM 62
+#define CLK_AXI_GLOBAL 63
+
+/* plls */
+#define PLL_A 64
+#define PLL_E 65
+#define PLL_E_2P5 66
+#define PLL_E_25 67
+#define PLL_E_112P5 68
+#define PLL_F 69
+#define PLL_TV 70
+#define PLL_TV_A 71
+#define PLL_SYS 72
+
+#define CLK_MAX 73
+
+#endif
diff --git a/include/dt-bindings/reset/sunplus,sp7021-reset.h b/include/dt-bindings/reset/sunplus,sp7021-reset.h
new file mode 100644
index 000000000000..ab486707387f
--- /dev/null
+++ b/include/dt-bindings/reset/sunplus,sp7021-reset.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ * All rights reserved.
+ */
+#ifndef _DT_BINDINGS_RST_SUNPLUS_SP7021_H
+#define _DT_BINDINGS_RST_SUNPLUS_SP7021_H
+
+#define RST_SYSTEM 0
+#define RST_RTC 1
+#define RST_IOCTL 2
+#define RST_IOP 3
+#define RST_OTPRX 4
+#define RST_NOC 5
+#define RST_BR 6
+#define RST_RBUS_L00 7
+#define RST_SPIFL 8
+#define RST_SDCTRL0 9
+#define RST_PERI0 10
+#define RST_A926 11
+#define RST_UMCTL2 12
+#define RST_PERI1 13
+#define RST_DDR_PHY0 14
+#define RST_ACHIP 15
+#define RST_STC0 16
+#define RST_STC_AV0 17
+#define RST_STC_AV1 18
+#define RST_STC_AV2 19
+#define RST_UA0 20
+#define RST_UA1 21
+#define RST_UA2 22
+#define RST_UA3 23
+#define RST_UA4 24
+#define RST_HWUA 25
+#define RST_DDC0 26
+#define RST_UADMA 27
+#define RST_CBDMA0 28
+#define RST_CBDMA1 29
+#define RST_SPI_COMBO_0 30
+#define RST_SPI_COMBO_1 31
+#define RST_SPI_COMBO_2 32
+#define RST_SPI_COMBO_3 33
+#define RST_AUD 34
+#define RST_USBC0 35
+#define RST_USBC1 36
+#define RST_UPHY0 37
+#define RST_UPHY1 38
+#define RST_I2CM0 39
+#define RST_I2CM1 40
+#define RST_I2CM2 41
+#define RST_I2CM3 42
+#define RST_PMC 43
+#define RST_CARD_CTL0 44
+#define RST_CARD_CTL1 45
+#define RST_CARD_CTL4 46
+#define RST_BCH 47
+#define RST_DDFCH 48
+#define RST_CSIIW0 49
+#define RST_CSIIW1 50
+#define RST_MIPICSI0 51
+#define RST_MIPICSI1 52
+#define RST_HDMI_TX 53
+#define RST_VPOST 54
+#define RST_TGEN 55
+#define RST_DMIX 56
+#define RST_TCON 57
+#define RST_INTERRUPT 58
+#define RST_RGST 59
+#define RST_GPIO 60
+#define RST_RBUS_TOP 61
+#define RST_MAILBOX 62
+#define RST_SPIND 63
+#define RST_I2C2CBUS 64
+#define RST_SEC 65
+#define RST_DVE 66
+#define RST_GPOST0 67
+#define RST_OSD0 68
+#define RST_DISP_PWM 69
+#define RST_UADBG 70
+#define RST_DUMMY_MASTER 71
+#define RST_FIO_CTL 72
+#define RST_FPGA 73
+#define RST_L2SW 74
+#define RST_ICM 75
+#define RST_AXI_GLOBAL 76
+
+#endif