diff options
author | Christoph Hellwig <hch@lst.de> | 2018-03-19 08:37:50 +0100 |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2018-03-19 22:54:47 -0400 |
commit | e184f2bf4d9f1a3c612a8c1d67e73e9cf8ab5ab9 (patch) | |
tree | a1e3cb26a3171542c142c2c99bc145b7093b12e4 | |
parent | 6937d7322ac4c56b56cc6bd5c83fd1d36ce52f5d (diff) | |
download | linux-stable-e184f2bf4d9f1a3c612a8c1d67e73e9cf8ab5ab9.tar.gz linux-stable-e184f2bf4d9f1a3c612a8c1d67e73e9cf8ab5ab9.tar.bz2 linux-stable-e184f2bf4d9f1a3c612a8c1d67e73e9cf8ab5ab9.zip |
scsi: remove the fdomain and fdomain_cs drivers
These drivers haven't seen any recent bug fixing and are two of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-rw-r--r-- | MAINTAINERS | 6 | ||||
-rw-r--r-- | arch/powerpc/configs/c2k_defconfig | 1 | ||||
-rw-r--r-- | drivers/scsi/Kconfig | 20 | ||||
-rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
-rw-r--r-- | drivers/scsi/fdomain.c | 1783 | ||||
-rw-r--r-- | drivers/scsi/fdomain.h | 24 | ||||
-rw-r--r-- | drivers/scsi/pcmcia/Kconfig | 9 | ||||
-rw-r--r-- | drivers/scsi/pcmcia/Makefile | 2 | ||||
-rw-r--r-- | drivers/scsi/pcmcia/fdomain_core.c | 2 | ||||
-rw-r--r-- | drivers/scsi/pcmcia/fdomain_stub.c | 209 |
10 files changed, 0 insertions, 2057 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 36eb73238cf5..ccde214bb82d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5842,12 +5842,6 @@ F: tools/testing/selftests/futex/ F: tools/perf/bench/futex* F: Documentation/*futex* -FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit) -M: Rik Faith <faith@cs.unc.edu> -L: linux-scsi@vger.kernel.org -S: Odd Fixes (e.g., new signatures) -F: drivers/scsi/fdomain.* - GCC PLUGINS M: Kees Cook <keescook@chromium.org> R: Emese Revfy <re.emese@gmail.com> diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 4bb832a41d55..6c1196b0f81e 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -184,7 +184,6 @@ CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index b18dfa1c14a1..117c2fb41b77 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -640,26 +640,6 @@ config SCSI_DMX3191D To compile this driver as a module, choose M here: the module will be called dmx3191d. -config SCSI_FUTURE_DOMAIN - tristate "Future Domain 16xx SCSI/AHA-2920A support" - depends on (ISA || PCI) && SCSI - select CHECK_SIGNATURE - ---help--- - This is support for Future Domain's 16-bit SCSI host adapters - (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and - other adapters based on the Future Domain chipsets (Quantum - ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board). - It is explained in section 3.7 of the SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip - and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI - controller support"). This Future Domain driver works with the older - Adaptec AHA-2920A boards with a Future Domain chip on them. - - To compile this driver as a module, choose M here: the - module will be called fdomain. - config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 46f1c1033f0e..77bb0017bb02 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -74,7 +74,6 @@ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o -obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c deleted file mode 100644 index ebbe5a3e665d..000000000000 --- a/drivers/scsi/fdomain.c +++ /dev/null @@ -1,1783 +0,0 @@ -/* fdomain.c -- Future Domain TMC-16x0 SCSI driver - * Created: Sun May 3 18:53:19 1992 by faith@cs.unc.edu - * Revised: Mon Dec 28 21:59:02 1998 by faith@acm.org - * Author: Rickard E. Faith, faith@cs.unc.edu - * Copyright 1992-1996, 1998 Rickard E. Faith (faith@acm.org) - * Shared IRQ supported added 7/7/2001 Alan Cox <alan@lxorguk.ukuu.org.uk> - - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - - ************************************************************************** - - SUMMARY: - - Future Domain BIOS versions supported for autodetect: - 2.0, 3.0, 3.2, 3.4 (1.0), 3.5 (2.0), 3.6, 3.61 - Chips are supported: - TMC-1800, TMC-18C50, TMC-18C30, TMC-36C70 - Boards supported: - Future Domain TMC-1650, TMC-1660, TMC-1670, TMC-1680, TMC-1610M/MER/MEX - Future Domain TMC-3260 (PCI) - Quantum ISA-200S, ISA-250MG - Adaptec AHA-2920A (PCI) [BUT *NOT* AHA-2920C -- use aic7xxx instead] - IBM ? - LILO/INSMOD command-line options: - fdomain=<PORT_BASE>,<IRQ>[,<ADAPTER_ID>] - - - - NOTE: - - The Adaptec AHA-2920C has an Adaptec AIC-7850 chip on it. - Use the aic7xxx driver for this board. - - The Adaptec AHA-2920A has a Future Domain chip on it, so this is the right - driver for that card. Unfortunately, the boxes will probably just say - "2920", so you'll have to look on the card for a Future Domain logo, or a - letter after the 2920. - - - - THANKS: - - Thanks to Adaptec for providing PCI boards for testing. This finally - enabled me to test the PCI detection and correct it for PCI boards that do - not have a BIOS at a standard ISA location. For PCI boards, LILO/INSMOD - command-line options should no longer be needed. --RF 18Nov98 - - - - DESCRIPTION: - - This is the Linux low-level SCSI driver for Future Domain TMC-1660/1680 - TMC-1650/1670, and TMC-3260 SCSI host adapters. The 1650 and 1670 have a - 25-pin external connector, whereas the 1660 and 1680 have a SCSI-2 50-pin - high-density external connector. The 1670 and 1680 have floppy disk - controllers built in. The TMC-3260 is a PCI bus card. - - Future Domain's older boards are based on the TMC-1800 chip, and this - driver was originally written for a TMC-1680 board with the TMC-1800 chip. - More recently, boards are being produced with the TMC-18C50 and TMC-18C30 - chips. The latest and greatest board may not work with this driver. If - you have to patch this driver so that it will recognize your board's BIOS - signature, then the driver may fail to function after the board is - detected. - - Please note that the drive ordering that Future Domain implemented in BIOS - versions 3.4 and 3.5 is the opposite of the order (currently) used by the - rest of the SCSI industry. If you have BIOS version 3.4 or 3.5, and have - more than one drive, then the drive ordering will be the reverse of that - which you see under DOS. For example, under DOS SCSI ID 0 will be D: and - SCSI ID 1 will be C: (the boot device). Under Linux, SCSI ID 0 will be - /dev/sda and SCSI ID 1 will be /dev/sdb. The Linux ordering is consistent - with that provided by all the other SCSI drivers for Linux. If you want - this changed, you will probably have to patch the higher level SCSI code. - If you do so, please send me patches that are protected by #ifdefs. - - If you have a TMC-8xx or TMC-9xx board, then this is not the driver for - your board. Please refer to the Seagate driver for more information and - possible support. - - - - HISTORY: - - Linux Driver Driver - Version Version Date Support/Notes - - 0.0 3 May 1992 V2.0 BIOS; 1800 chip - 0.97 1.9 28 Jul 1992 - 0.98.6 3.1 27 Nov 1992 - 0.99 3.2 9 Dec 1992 - - 0.99.3 3.3 10 Jan 1993 V3.0 BIOS - 0.99.5 3.5 18 Feb 1993 - 0.99.10 3.6 15 May 1993 V3.2 BIOS; 18C50 chip - 0.99.11 3.17 3 Jul 1993 (now under RCS) - 0.99.12 3.18 13 Aug 1993 - 0.99.14 5.6 31 Oct 1993 (reselection code removed) - - 0.99.15 5.9 23 Jan 1994 V3.4 BIOS (preliminary) - 1.0.8/1.1.1 5.15 1 Apr 1994 V3.4 BIOS; 18C30 chip (preliminary) - 1.0.9/1.1.3 5.16 7 Apr 1994 V3.4 BIOS; 18C30 chip - 1.1.38 5.18 30 Jul 1994 36C70 chip (PCI version of 18C30) - 1.1.62 5.20 2 Nov 1994 V3.5 BIOS - 1.1.73 5.22 7 Dec 1994 Quantum ISA-200S board; V2.0 BIOS - - 1.1.82 5.26 14 Jan 1995 V3.5 BIOS; TMC-1610M/MER/MEX board - 1.2.10 5.28 5 Jun 1995 Quantum ISA-250MG board; V2.0, V2.01 BIOS - 1.3.4 5.31 23 Jun 1995 PCI BIOS-32 detection (preliminary) - 1.3.7 5.33 4 Jul 1995 PCI BIOS-32 detection - 1.3.28 5.36 17 Sep 1995 V3.61 BIOS; LILO command-line support - 1.3.34 5.39 12 Oct 1995 V3.60 BIOS; /proc - 1.3.72 5.39 8 Feb 1996 Adaptec AHA-2920 board - 1.3.85 5.41 4 Apr 1996 - 2.0.12 5.44 8 Aug 1996 Use ID 7 for all PCI cards - 2.1.1 5.45 2 Oct 1996 Update ROM accesses for 2.1.x - 2.1.97 5.46 23 Apr 1998 Rewritten PCI detection routines [mj] - 2.1.11x 5.47 9 Aug 1998 Touched for 8 SCSI disk majors support - 5.48 18 Nov 1998 BIOS no longer needed for PCI detection - 2.2.0 5.50 28 Dec 1998 Support insmod parameters - - - REFERENCES USED: - - "TMC-1800 SCSI Chip Specification (FDC-1800T)", Future Domain Corporation, - 1990. - - "Technical Reference Manual: 18C50 SCSI Host Adapter Chip", Future Domain - Corporation, January 1992. - - "LXT SCSI Products: Specifications and OEM Technical Manual (Revision - B/September 1991)", Maxtor Corporation, 1991. - - "7213S product Manual (Revision P3)", Maxtor Corporation, 1992. - - "Draft Proposed American National Standard: Small Computer System - Interface - 2 (SCSI-2)", Global Engineering Documents. (X3T9.2/86-109, - revision 10h, October 17, 1991) - - Private communications, Drew Eckhardt (drew@cs.colorado.edu) and Eric - Youngdale (ericy@cais.com), 1992. - - Private communication, Tuong Le (Future Domain Engineering department), - 1994. (Disk geometry computations for Future Domain BIOS version 3.4, and - TMC-18C30 detection.) - - Hogan, Thom. The Programmer's PC Sourcebook. Microsoft Press, 1988. Page - 60 (2.39: Disk Partition Table Layout). - - "18C30 Technical Reference Manual", Future Domain Corporation, 1993, page - 6-1. - - - - NOTES ON REFERENCES: - - The Maxtor manuals were free. Maxtor telephone technical support is - great! - - The Future Domain manuals were $25 and $35. They document the chip, not - the TMC-16x0 boards, so some information I had to guess at. In 1992, - Future Domain sold DOS BIOS source for $250 and the UN*X driver source was - $750, but these required a non-disclosure agreement, so even if I could - have afforded them, they would *not* have been useful for writing this - publicly distributable driver. Future Domain technical support has - provided some information on the phone and have sent a few useful FAXs. - They have been much more helpful since they started to recognize that the - word "Linux" refers to an operating system :-). - - - - ALPHA TESTERS: - - There are many other alpha testers that come and go as the driver - develops. The people listed here were most helpful in times of greatest - need (mostly early on -- I've probably left out a few worthy people in - more recent times): - - Todd Carrico (todd@wutc.wustl.edu), Dan Poirier (poirier@cs.unc.edu ), Ken - Corey (kenc@sol.acs.unt.edu), C. de Bruin (bruin@bruin@sterbbs.nl), Sakari - Aaltonen (sakaria@vipunen.hit.fi), John Rice (rice@xanth.cs.odu.edu), Brad - Yearwood (brad@optilink.com), and Ray Toy (toy@soho.crd.ge.com). - - Special thanks to Tien-Wan Yang (twyang@cs.uh.edu), who graciously lent me - his 18C50-based card for debugging. He is the sole reason that this - driver works with the 18C50 chip. - - Thanks to Dave Newman (dnewman@crl.com) for providing initial patches for - the version 3.4 BIOS. - - Thanks to James T. McKinley (mckinley@msupa.pa.msu.edu) for providing - patches that support the TMC-3260, a PCI bus card with the 36C70 chip. - The 36C70 chip appears to be "completely compatible" with the 18C30 chip. - - Thanks to Eric Kasten (tigger@petroglyph.cl.msu.edu) for providing the - patch for the version 3.5 BIOS. - - Thanks for Stephen Henson (shenson@nyx10.cs.du.edu) for providing the - patch for the Quantum ISA-200S SCSI adapter. - - Thanks to Adam Bowen for the signature to the 1610M/MER/MEX scsi cards, to - Martin Andrews (andrewm@ccfadm.eeg.ccf.org) for the signature to some - random TMC-1680 repackaged by IBM; and to Mintak Ng (mintak@panix.com) for - the version 3.61 BIOS signature. - - Thanks for Mark Singer (elf@netcom.com) and Richard Simpson - (rsimpson@ewrcsdra.demon.co.uk) for more Quantum signatures and detective - work on the Quantum RAM layout. - - Special thanks to James T. McKinley (mckinley@msupa.pa.msu.edu) for - providing patches for proper PCI BIOS32-mediated detection of the TMC-3260 - card (a PCI bus card with the 36C70 chip). Please send James PCI-related - bug reports. - - Thanks to Tom Cavin (tec@usa1.com) for preliminary command-line option - patches. - - New PCI detection code written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> - - Insmod parameter code based on patches from Daniel Graham - <graham@balance.uoregon.edu>. - - All of the alpha testers deserve much thanks. - - - - NOTES ON USER DEFINABLE OPTIONS: - - DEBUG: This turns on the printing of various debug information. - - ENABLE_PARITY: This turns on SCSI parity checking. With the current - driver, all attached devices must support SCSI parity. If none of your - devices support parity, then you can probably get the driver to work by - turning this option off. I have no way of testing this, however, and it - would appear that no one ever uses this option. - - FIFO_COUNT: The host adapter has an 8K cache (host adapters based on the - 18C30 chip have a 2k cache). When this many 512 byte blocks are filled by - the SCSI device, an interrupt will be raised. Therefore, this could be as - low as 0, or as high as 16. Note, however, that values which are too high - or too low seem to prevent any interrupts from occurring, and thereby lock - up the machine. I have found that 2 is a good number, but throughput may - be increased by changing this value to values which are close to 2. - Please let me know if you try any different values. - - RESELECTION: This is no longer an option, since I gave up trying to - implement it in version 4.x of this driver. It did not improve - performance at all and made the driver unstable (because I never found one - of the two race conditions which were introduced by the multiple - outstanding command code). The instability seems a very high price to pay - just so that you don't have to wait for the tape to rewind. If you want - this feature implemented, send me patches. I'll be happy to send a copy - of my (broken) driver to anyone who would like to see a copy. - - **************************************************************************/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/proc_fs.h> -#include <linux/pci.h> -#include <linux/stat.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <scsi/scsicam.h> - - -#include <scsi/scsi.h> -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_ioctl.h> -#include "fdomain.h" - -#ifndef PCMCIA -MODULE_AUTHOR("Rickard E. Faith"); -MODULE_DESCRIPTION("Future domain SCSI driver"); -MODULE_LICENSE("GPL"); -#endif - - -#define VERSION "$Revision: 5.51 $" - -/* START OF USER DEFINABLE OPTIONS */ - -#define DEBUG 0 /* Enable debugging output */ -#define ENABLE_PARITY 1 /* Enable SCSI Parity */ -#define FIFO_COUNT 2 /* Number of 512 byte blocks before INTR */ - -/* END OF USER DEFINABLE OPTIONS */ - -#if DEBUG -#define EVERY_ACCESS 0 /* Write a line on every scsi access */ -#define ERRORS_ONLY 1 /* Only write a line if there is an error */ -#define DEBUG_DETECT 0 /* Debug fdomain_16x0_detect() */ -#define DEBUG_MESSAGES 1 /* Debug MESSAGE IN phase */ -#define DEBUG_ABORT 1 /* Debug abort() routine */ -#define DEBUG_RESET 1 /* Debug reset() routine */ -#define DEBUG_RACE 1 /* Debug interrupt-driven race condition */ -#else -#define EVERY_ACCESS 0 /* LEAVE THESE ALONE--CHANGE THE ONES ABOVE */ -#define ERRORS_ONLY 0 -#define DEBUG_DETECT 0 -#define DEBUG_MESSAGES 0 -#define DEBUG_ABORT 0 -#define DEBUG_RESET 0 -#define DEBUG_RACE 0 -#endif - -/* Errors are reported on the line, so we don't need to report them again */ -#if EVERY_ACCESS -#undef ERRORS_ONLY -#define ERRORS_ONLY 0 -#endif - -#if ENABLE_PARITY -#define PARITY_MASK 0x08 -#else -#define PARITY_MASK 0x00 -#endif - -enum chip_type { - unknown = 0x00, - tmc1800 = 0x01, - tmc18c50 = 0x02, - tmc18c30 = 0x03, -}; - -enum { - in_arbitration = 0x02, - in_selection = 0x04, - in_other = 0x08, - disconnect = 0x10, - aborted = 0x20, - sent_ident = 0x40, -}; - -enum in_port_type { - Read_SCSI_Data = 0, - SCSI_Status = 1, - TMC_Status = 2, - FIFO_Status = 3, /* tmc18c50/tmc18c30 only */ - Interrupt_Cond = 4, /* tmc18c50/tmc18c30 only */ - LSB_ID_Code = 5, - MSB_ID_Code = 6, - Read_Loopback = 7, - SCSI_Data_NoACK = 8, - Interrupt_Status = 9, - Configuration1 = 10, - Configuration2 = 11, /* tmc18c50/tmc18c30 only */ - Read_FIFO = 12, - FIFO_Data_Count = 14 -}; - -enum out_port_type { - Write_SCSI_Data = 0, - SCSI_Cntl = 1, - Interrupt_Cntl = 2, - SCSI_Mode_Cntl = 3, - TMC_Cntl = 4, - Memory_Cntl = 5, /* tmc18c50/tmc18c30 only */ - Write_Loopback = 7, - IO_Control = 11, /* tmc18c30 only */ - Write_FIFO = 12 -}; - -/* .bss will zero all the static variables below */ -static int port_base; -static unsigned long bios_base; -static void __iomem * bios_mem; -static int bios_major; -static int bios_minor; -static int PCI_bus; -#ifdef CONFIG_PCI -static struct pci_dev *PCI_dev; -#endif -static int Quantum; /* Quantum board variant */ -static int interrupt_level; -static volatile int in_command; -static struct scsi_cmnd *current_SC; -static enum chip_type chip = unknown; -static int adapter_mask; -static int this_id; -static int setup_called; - -#if DEBUG_RACE -static volatile int in_interrupt_flag; -#endif - -static int FIFO_Size = 0x2000; /* 8k FIFO for - pre-tmc18c30 chips */ - -static irqreturn_t do_fdomain_16x0_intr( int irq, void *dev_id ); -/* Allow insmod parameters to be like LILO parameters. For example: - insmod fdomain fdomain=0x140,11 */ -static char * fdomain = NULL; -module_param(fdomain, charp, 0); - -#ifndef PCMCIA - -static unsigned long addresses[] = { - 0xc8000, - 0xca000, - 0xce000, - 0xde000, - 0xcc000, /* Extra addresses for PCI boards */ - 0xd0000, - 0xe0000, -}; -#define ADDRESS_COUNT ARRAY_SIZE(addresses) - -static unsigned short ports[] = { 0x140, 0x150, 0x160, 0x170 }; -#define PORT_COUNT ARRAY_SIZE(ports) - -static unsigned short ints[] = { 3, 5, 10, 11, 12, 14, 15, 0 }; - -#endif /* !PCMCIA */ - -/* - - READ THIS BEFORE YOU ADD A SIGNATURE! - - READING THIS SHORT NOTE CAN SAVE YOU LOTS OF TIME! - - READ EVERY WORD, ESPECIALLY THE WORD *NOT* - - This driver works *ONLY* for Future Domain cards using the TMC-1800, - TMC-18C50, or TMC-18C30 chip. This includes models TMC-1650, 1660, 1670, - and 1680. These are all 16-bit cards. - - The following BIOS signature signatures are for boards which do *NOT* - work with this driver (these TMC-8xx and TMC-9xx boards may work with the - Seagate driver): - - FUTURE DOMAIN CORP. (C) 1986-1988 V4.0I 03/16/88 - FUTURE DOMAIN CORP. (C) 1986-1989 V5.0C2/14/89 - FUTURE DOMAIN CORP. (C) 1986-1989 V6.0A7/28/89 - FUTURE DOMAIN CORP. (C) 1986-1990 V6.0105/31/90 - FUTURE DOMAIN CORP. (C) 1986-1990 V6.0209/18/90 - FUTURE DOMAIN CORP. (C) 1986-1990 V7.009/18/90 - FUTURE DOMAIN CORP. (C) 1992 V8.00.004/02/92 - - (The cards which do *NOT* work are all 8-bit cards -- although some of - them have a 16-bit form-factor, the upper 8-bits are used only for IRQs - and are *NOT* used for data. You can tell the difference by following - the tracings on the circuit board -- if only the IRQ lines are involved, - you have a "8-bit" card, and should *NOT* use this driver.) - -*/ - -#ifndef PCMCIA - -static struct signature { - const char *signature; - int sig_offset; - int sig_length; - int major_bios_version; - int minor_bios_version; - int flag; /* 1 == PCI_bus, 2 == ISA_200S, 3 == ISA_250MG, 4 == ISA_200S */ -} signatures[] = { - /* 1 2 3 4 5 6 */ - /* 123456789012345678901234567890123456789012345678901234567890 */ - { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 5, 50, 2, 0, 0 }, - { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V1.07/28/89", 5, 50, 2, 0, 0 }, - { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 72, 50, 2, 0, 2 }, - { "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.0", 73, 43, 2, 0, 3 }, - { "FUTURE DOMAIN CORP. (C) 1991 1800-V2.0.", 72, 39, 2, 0, 4 }, - { "FUTURE DOMAIN CORP. (C) 1992 V3.00.004/02/92", 5, 44, 3, 0, 0 }, - { "FUTURE DOMAIN TMC-18XX (C) 1993 V3.203/12/93", 5, 44, 3, 2, 0 }, - { "IBM F1 P2 BIOS v1.0104/29/93", 5, 28, 3, -1, 0 }, - { "Future Domain Corp. V1.0008/18/93", 5, 33, 3, 4, 0 }, - { "Future Domain Corp. V1.0008/18/93", 26, 33, 3, 4, 1 }, - { "Adaptec AHA-2920 PCI-SCSI Card", 42, 31, 3, -1, 1 }, - { "IBM F1 P264/32", 5, 14, 3, -1, 1 }, - /* This next signature may not be a 3.5 bios */ - { "Future Domain Corp. V2.0108/18/93", 5, 33, 3, 5, 0 }, - { "FUTURE DOMAIN CORP. V3.5008/18/93", 5, 34, 3, 5, 0 }, - { "FUTURE DOMAIN 18c30/18c50/1800 (C) 1994 V3.5", 5, 44, 3, 5, 0 }, - { "FUTURE DOMAIN CORP. V3.6008/18/93", 5, 34, 3, 6, 0 }, - { "FUTURE DOMAIN CORP. V3.6108/18/93", 5, 34, 3, 6, 0 }, - { "FUTURE DOMAIN TMC-18XX", 5, 22, -1, -1, 0 }, - - /* READ NOTICE ABOVE *BEFORE* YOU WASTE YOUR TIME ADDING A SIGNATURE - Also, fix the disk geometry code for your signature and send your - changes for faith@cs.unc.edu. Above all, do *NOT* change any old - signatures! - - Note that the last line will match a "generic" 18XX bios. Because - Future Domain has changed the host SCSI ID and/or the location of the - geometry information in the on-board RAM area for each of the first - three BIOS's, it is still important to enter a fully qualified - signature in the table for any new BIOS's (after the host SCSI ID and - geometry location are verified). */ -}; - -#define SIGNATURE_COUNT ARRAY_SIZE(signatures) - -#endif /* !PCMCIA */ - -static void print_banner( struct Scsi_Host *shpnt ) -{ - if (!shpnt) return; /* This won't ever happen */ - - if (bios_major < 0 && bios_minor < 0) { - printk(KERN_INFO "scsi%d: <fdomain> No BIOS; using scsi id %d\n", - shpnt->host_no, shpnt->this_id); - } else { - printk(KERN_INFO "scsi%d: <fdomain> BIOS version ", shpnt->host_no); - - if (bios_major >= 0) printk("%d.", bios_major); - else printk("?."); - - if (bios_minor >= 0) printk("%d", bios_minor); - else printk("?."); - - printk( " at 0x%lx using scsi id %d\n", - bios_base, shpnt->this_id ); - } - - /* If this driver works for later FD PCI - boards, we will have to modify banner - for additional PCI cards, but for now if - it's PCI it's a TMC-3260 - JTM */ - printk(KERN_INFO "scsi%d: <fdomain> %s chip at 0x%x irq ", - shpnt->host_no, - chip == tmc1800 ? "TMC-1800" : (chip == tmc18c50 ? "TMC-18C50" : (chip == tmc18c30 ? (PCI_bus ? "TMC-36C70 (PCI bus)" : "TMC-18C30") : "Unknown")), - port_base); - - if (interrupt_level) - printk("%d", interrupt_level); - else - printk("<none>"); - - printk( "\n" ); -} - -int fdomain_setup(char *str) -{ - int ints[4]; - - (void)get_options(str, ARRAY_SIZE(ints), ints); - - if (setup_called++ || ints[0] < 2 || ints[0] > 3) { - printk(KERN_INFO "scsi: <fdomain> Usage: fdomain=<PORT_BASE>,<IRQ>[,<ADAPTER_ID>]\n"); - printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n"); - return 0; - } - - port_base = ints[0] >= 1 ? ints[1] : 0; - interrupt_level = ints[0] >= 2 ? ints[2] : 0; - this_id = ints[0] >= 3 ? ints[3] : 0; - - bios_major = bios_minor = -1; /* Use geometry for BIOS version >= 3.4 */ - ++setup_called; - return 1; -} - -__setup("fdomain=", fdomain_setup); - - -static void do_pause(unsigned amount) /* Pause for amount*10 milliseconds */ -{ - mdelay(10*amount); -} - -static inline void fdomain_make_bus_idle( void ) -{ - outb(0, port_base + SCSI_Cntl); - outb(0, port_base + SCSI_Mode_Cntl); - if (chip == tmc18c50 || chip == tmc18c30) - outb(0x21 | PARITY_MASK, port_base + TMC_Cntl); /* Clear forced intr. */ - else - outb(0x01 | PARITY_MASK, port_base + TMC_Cntl); -} - -static int fdomain_is_valid_port( int port ) -{ -#if DEBUG_DETECT - printk( " (%x%x),", - inb( port + MSB_ID_Code ), inb( port + LSB_ID_Code ) ); -#endif - - /* The MCA ID is a unique id for each MCA compatible board. We - are using ISA boards, but Future Domain provides the MCA ID - anyway. We can use this ID to ensure that this is a Future - Domain TMC-1660/TMC-1680. - */ - - if (inb( port + LSB_ID_Code ) != 0xe9) { /* test for 0x6127 id */ - if (inb( port + LSB_ID_Code ) != 0x27) return 0; - if (inb( port + MSB_ID_Code ) != 0x61) return 0; - chip = tmc1800; - } else { /* test for 0xe960 id */ - if (inb( port + MSB_ID_Code ) != 0x60) return 0; - chip = tmc18c50; - - /* Try to toggle 32-bit mode. This only - works on an 18c30 chip. (User reports - say this works, so we should switch to - it in the near future.) */ - - outb( 0x80, port + IO_Control ); - if ((inb( port + Configuration2 ) & 0x80) == 0x80) { - outb( 0x00, port + IO_Control ); - if ((inb( port + Configuration2 ) & 0x80) == 0x00) { - chip = tmc18c30; - FIFO_Size = 0x800; /* 2k FIFO */ - } - } - /* If that failed, we are an 18c50. */ - } - - return 1; -} - -static int fdomain_test_loopback( void ) -{ - int i; - int result; - - for (i = 0; i < 255; i++) { - outb( i, port_base + Write_Loopback ); - result = inb( port_base + Read_Loopback ); - if (i != result) - return 1; - } - return 0; -} - -#ifndef PCMCIA - -/* fdomain_get_irq assumes that we have a valid MCA ID for a - TMC-1660/TMC-1680 Future Domain board. Now, check to be sure the - bios_base matches these ports. If someone was unlucky enough to have - purchased more than one Future Domain board, then they will have to - modify this code, as we only detect one board here. [The one with the - lowest bios_base.] - - Note that this routine is only used for systems without a PCI BIOS32 - (e.g., ISA bus). For PCI bus systems, this routine will likely fail - unless one of the IRQs listed in the ints array is used by the board. - Sometimes it is possible to use the computer's BIOS setup screen to - configure a PCI system so that one of these IRQs will be used by the - Future Domain card. */ - -static int fdomain_get_irq( int base ) -{ - int options = inb(base + Configuration1); - -#if DEBUG_DETECT - printk("scsi: <fdomain> Options = %x\n", options); -#endif - - /* Check for board with lowest bios_base -- - this isn't valid for the 18c30 or for - boards on the PCI bus, so just assume we - have the right board. */ - - if (chip != tmc18c30 && !PCI_bus && addresses[(options & 0xc0) >> 6 ] != bios_base) - return 0; - return ints[(options & 0x0e) >> 1]; -} - -static int fdomain_isa_detect( int *irq, int *iobase ) -{ - int i, j; - int base = 0xdeadbeef; - int flag = 0; - -#if DEBUG_DETECT - printk( "scsi: <fdomain> fdomain_isa_detect:" ); -#endif - - for (i = 0; i < ADDRESS_COUNT; i++) { - void __iomem *p = ioremap(addresses[i], 0x2000); - if (!p) - continue; -#if DEBUG_DETECT - printk( " %lx(%lx),", addresses[i], bios_base ); -#endif - for (j = 0; j < SIGNATURE_COUNT; j++) { - if (check_signature(p + signatures[j].sig_offset, - signatures[j].signature, - signatures[j].sig_length )) { - bios_major = signatures[j].major_bios_version; - bios_minor = signatures[j].minor_bios_version; - PCI_bus = (signatures[j].flag == 1); - Quantum = (signatures[j].flag > 1) ? signatures[j].flag : 0; - bios_base = addresses[i]; - bios_mem = p; - goto found; - } - } - iounmap(p); - } - -found: - if (bios_major == 2) { - /* The TMC-1660/TMC-1680 has a RAM area just after the BIOS ROM. - Assuming the ROM is enabled (otherwise we wouldn't have been - able to read the ROM signature :-), then the ROM sets up the - RAM area with some magic numbers, such as a list of port - base addresses and a list of the disk "geometry" reported to - DOS (this geometry has nothing to do with physical geometry). - */ - - switch (Quantum) { - case 2: /* ISA_200S */ - case 3: /* ISA_250MG */ - base = readb(bios_mem + 0x1fa2) + (readb(bios_mem + 0x1fa3) << 8); - break; - case 4: /* ISA_200S (another one) */ - base = readb(bios_mem + 0x1fa3) + (readb(bios_mem + 0x1fa4) << 8); - break; - default: - base = readb(bios_mem + 0x1fcc) + (readb(bios_mem + 0x1fcd) << 8); - break; - } - -#if DEBUG_DETECT - printk( " %x,", base ); -#endif - - for (i = 0; i < PORT_COUNT; i++) { - if (base == ports[i]) { - if (!request_region(base, 0x10, "fdomain")) - break; - if (!fdomain_is_valid_port(base)) { - release_region(base, 0x10); - break; - } - *irq = fdomain_get_irq( base ); - *iobase = base; - return 1; - } - } - - /* This is a bad sign. It usually means that someone patched the - BIOS signature list (the signatures variable) to contain a BIOS - signature for a board *OTHER THAN* the TMC-1660/TMC-1680. */ - -#if DEBUG_DETECT - printk( " RAM FAILED, " ); -#endif - } - - /* Anyway, the alternative to finding the address in the RAM is to just - search through every possible port address for one that is attached - to the Future Domain card. Don't panic, though, about reading all - these random port addresses -- there are rumors that the Future - Domain BIOS does something very similar. - - Do not, however, check ports which the kernel knows are being used by - another driver. */ - - for (i = 0; i < PORT_COUNT; i++) { - base = ports[i]; - if (!request_region(base, 0x10, "fdomain")) { -#if DEBUG_DETECT - printk( " (%x inuse),", base ); -#endif - continue; - } -#if DEBUG_DETECT - printk( " %x,", base ); -#endif - flag = fdomain_is_valid_port(base); - if (flag) - break; - release_region(base, 0x10); - } - -#if DEBUG_DETECT - if (flag) printk( " SUCCESS\n" ); - else printk( " FAILURE\n" ); -#endif - - if (!flag) return 0; /* iobase not found */ - - *irq = fdomain_get_irq( base ); - *iobase = base; - - return 1; /* success */ -} - -#else /* PCMCIA */ - -static int fdomain_isa_detect( int *irq, int *iobase ) -{ - if (irq) - *irq = 0; - if (iobase) - *iobase = 0; - return 0; -} - -#endif /* !PCMCIA */ - - -/* PCI detection function: int fdomain_pci_bios_detect(int* irq, int* - iobase) This function gets the Interrupt Level and I/O base address from - the PCI configuration registers. */ - -#ifdef CONFIG_PCI -static int fdomain_pci_bios_detect( int *irq, int *iobase, struct pci_dev **ret_pdev ) -{ - unsigned int pci_irq; /* PCI interrupt line */ - unsigned long pci_base; /* PCI I/O base address */ - struct pci_dev *pdev = NULL; - -#if DEBUG_DETECT - /* Tell how to print a list of the known PCI devices from bios32 and - list vendor and device IDs being used if in debug mode. */ - - printk( "scsi: <fdomain> INFO: use lspci -v to see list of PCI devices\n" ); - printk( "scsi: <fdomain> TMC-3260 detect:" - " Using Vendor ID: 0x%x and Device ID: 0x%x\n", - PCI_VENDOR_ID_FD, - PCI_DEVICE_ID_FD_36C70 ); -#endif - - if ((pdev = pci_get_device(PCI_VENDOR_ID_FD, PCI_DEVICE_ID_FD_36C70, pdev)) == NULL) - return 0; - if (pci_enable_device(pdev)) - goto fail; - -#if DEBUG_DETECT - printk( "scsi: <fdomain> TMC-3260 detect:" - " PCI bus %u, device %u, function %u\n", - pdev->bus->number, - PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn)); -#endif - - /* We now have the appropriate device function for the FD board so we - just read the PCI config info from the registers. */ - - pci_base = pci_resource_start(pdev, 0); - pci_irq = pdev->irq; - - if (!request_region( pci_base, 0x10, "fdomain" )) - goto fail; - - /* Now we have the I/O base address and interrupt from the PCI - configuration registers. */ - - *irq = pci_irq; - *iobase = pci_base; - *ret_pdev = pdev; - -#if DEBUG_DETECT - printk( "scsi: <fdomain> TMC-3260 detect:" - " IRQ = %d, I/O base = 0x%x [0x%lx]\n", *irq, *iobase, pci_base ); -#endif - - if (!fdomain_is_valid_port(pci_base)) { - printk(KERN_ERR "scsi: <fdomain> PCI card detected, but driver not loaded (invalid port)\n" ); - release_region(pci_base, 0x10); - goto fail; - } - - /* Fill in a few global variables. Ugh. */ - bios_major = bios_minor = -1; - PCI_bus = 1; - PCI_dev = pdev; - Quantum = 0; - bios_base = 0; - - return 1; -fail: - pci_dev_put(pdev); - return 0; -} - -#endif - -struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt ) -{ - int retcode; - struct Scsi_Host *shpnt; - struct pci_dev *pdev = NULL; - - if (setup_called) { -#if DEBUG_DETECT - printk( "scsi: <fdomain> No BIOS, using port_base = 0x%x, irq = %d\n", - port_base, interrupt_level ); -#endif - if (!request_region(port_base, 0x10, "fdomain")) { - printk( "scsi: <fdomain> port 0x%x is busy\n", port_base ); - printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" ); - return NULL; - } - if (!fdomain_is_valid_port( port_base )) { - printk( "scsi: <fdomain> Cannot locate chip at port base 0x%x\n", - port_base ); - printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" ); - release_region(port_base, 0x10); - return NULL; - } - } else { - int flag = 0; - -#ifdef CONFIG_PCI - /* Try PCI detection first */ - flag = fdomain_pci_bios_detect( &interrupt_level, &port_base, &pdev ); -#endif - if (!flag) { - /* Then try ISA bus detection */ - flag = fdomain_isa_detect( &interrupt_level, &port_base ); - - if (!flag) { - printk( "scsi: <fdomain> Detection failed (no card)\n" ); - return NULL; - } - } - } - - fdomain_16x0_host_reset(NULL); - - if (fdomain_test_loopback()) { - printk(KERN_ERR "scsi: <fdomain> Detection failed (loopback test failed at port base 0x%x)\n", port_base); - if (setup_called) { - printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n"); - } - goto fail; - } - - if (this_id) { - tpnt->this_id = (this_id & 0x07); - adapter_mask = (1 << tpnt->this_id); - } else { - if (PCI_bus || (bios_major == 3 && bios_minor >= 2) || bios_major < 0) { - tpnt->this_id = 7; - adapter_mask = 0x80; - } else { - tpnt->this_id = 6; - adapter_mask = 0x40; - } - } - -/* Print out a banner here in case we can't - get resources. */ - - shpnt = scsi_register( tpnt, 0 ); - if(shpnt == NULL) { - release_region(port_base, 0x10); - return NULL; - } - shpnt->irq = interrupt_level; - shpnt->io_port = port_base; - shpnt->n_io_port = 0x10; - print_banner( shpnt ); - - /* Log IRQ with kernel */ - if (!interrupt_level) { - printk(KERN_ERR "scsi: <fdomain> Card Detected, but driver not loaded (no IRQ)\n" ); - goto fail; - } else { - /* Register the IRQ with the kernel */ - - retcode = request_irq( interrupt_level, - do_fdomain_16x0_intr, pdev?IRQF_SHARED:0, "fdomain", shpnt); - - if (retcode < 0) { - if (retcode == -EINVAL) { - printk(KERN_ERR "scsi: <fdomain> IRQ %d is bad!\n", interrupt_level ); - printk(KERN_ERR " This shouldn't happen!\n" ); - printk(KERN_ERR " Send mail to faith@acm.org\n" ); - } else if (retcode == -EBUSY) { - printk(KERN_ERR "scsi: <fdomain> IRQ %d is already in use!\n", interrupt_level ); - printk(KERN_ERR " Please use another IRQ!\n" ); - } else { - printk(KERN_ERR "scsi: <fdomain> Error getting IRQ %d\n", interrupt_level ); - printk(KERN_ERR " This shouldn't happen!\n" ); - printk(KERN_ERR " Send mail to faith@acm.org\n" ); - } - printk(KERN_ERR "scsi: <fdomain> Detected, but driver not loaded (IRQ)\n" ); - goto fail; - } - } - return shpnt; -fail: - pci_dev_put(pdev); - release_region(port_base, 0x10); - return NULL; -} - -static int fdomain_16x0_detect(struct scsi_host_template *tpnt) -{ - if (fdomain) - fdomain_setup(fdomain); - return (__fdomain_16x0_detect(tpnt) != NULL); -} - -static const char *fdomain_16x0_info( struct Scsi_Host *ignore ) -{ - static char buffer[128]; - char *pt; - - strcpy( buffer, "Future Domain 16-bit SCSI Driver Version" ); - if (strchr( VERSION, ':')) { /* Assume VERSION is an RCS Revision string */ - strcat( buffer, strchr( VERSION, ':' ) + 1 ); - pt = strrchr( buffer, '$') - 1; - if (!pt) /* Stripped RCS Revision string? */ - pt = buffer + strlen( buffer ) - 1; - if (*pt != ' ') - ++pt; - *pt = '\0'; - } else { /* Assume VERSION is a number */ - strcat( buffer, " " VERSION ); - } - - return buffer; -} - -#if 0 -static int fdomain_arbitrate( void ) -{ - int status = 0; - unsigned long timeout; - -#if EVERY_ACCESS - printk( "fdomain_arbitrate()\n" ); -#endif - - outb(0x00, port_base + SCSI_Cntl); /* Disable data drivers */ - outb(adapter_mask, port_base + SCSI_Data_NoACK); /* Set our id bit */ - outb(0x04 | PARITY_MASK, port_base + TMC_Cntl); /* Start arbitration */ - - timeout = 500; - do { - status = inb(port_base + TMC_Status); /* Read adapter status */ - if (status & 0x02) /* Arbitration complete */ - return 0; - mdelay(1); /* Wait one millisecond */ - } while (--timeout); - - /* Make bus idle */ - fdomain_make_bus_idle(); - -#if EVERY_ACCESS - printk( "Arbitration failed, status = %x\n", status ); -#endif -#if ERRORS_ONLY - printk( "scsi: <fdomain> Arbitration failed, status = %x\n", status ); -#endif - return 1; -} -#endif - -static int fdomain_select( int target ) -{ - int status; - unsigned long timeout; -#if ERRORS_ONLY - static int flag = 0; -#endif - - outb(0x82, port_base + SCSI_Cntl); /* Bus Enable + Select */ - outb(adapter_mask | (1 << target), port_base + SCSI_Data_NoACK); - - /* Stop arbitration and enable parity */ - outb(PARITY_MASK, port_base + TMC_Cntl); - - timeout = 350; /* 350 msec */ - - do { - status = inb(port_base + SCSI_Status); /* Read adapter status */ - if (status & 1) { /* Busy asserted */ - /* Enable SCSI Bus (on error, should make bus idle with 0) */ - outb(0x80, port_base + SCSI_Cntl); - return 0; - } - mdelay(1); /* wait one msec */ - } while (--timeout); - /* Make bus idle */ - fdomain_make_bus_idle(); -#if EVERY_ACCESS - if (!target) printk( "Selection failed\n" ); -#endif -#if ERRORS_ONLY - if (!target) { - if (!flag) /* Skip first failure for all chips. */ - ++flag; - else - printk( "scsi: <fdomain> Selection failed\n" ); - } -#endif - return 1; -} - -static void my_done(int error) -{ - if (in_command) { - in_command = 0; - outb(0x00, port_base + Interrupt_Cntl); - fdomain_make_bus_idle(); - current_SC->result = error; - if (current_SC->scsi_done) - current_SC->scsi_done( current_SC ); - else panic( "scsi: <fdomain> current_SC->scsi_done() == NULL" ); - } else { - panic( "scsi: <fdomain> my_done() called outside of command\n" ); - } -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif -} - -static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id) -{ - unsigned long flags; - int status; - int done = 0; - unsigned data_count; - - /* The fdomain_16x0_intr is only called via - the interrupt handler. The goal of the - sti() here is to allow other - interruptions while this routine is - running. */ - - /* Check for other IRQ sources */ - if ((inb(port_base + TMC_Status) & 0x01) == 0) - return IRQ_NONE; - - /* It is our IRQ */ - outb(0x00, port_base + Interrupt_Cntl); - - /* We usually have one spurious interrupt after each command. Ignore it. */ - if (!in_command || !current_SC) { /* Spurious interrupt */ -#if EVERY_ACCESS - printk( "Spurious interrupt, in_command = %d, current_SC = %x\n", - in_command, current_SC ); -#endif - return IRQ_NONE; - } - - /* Abort calls my_done, so we do nothing here. */ - if (current_SC->SCp.phase & aborted) { -#if DEBUG_ABORT - printk( "scsi: <fdomain> Interrupt after abort, ignoring\n" ); -#endif - /* - return IRQ_HANDLED; */ - } - -#if DEBUG_RACE - ++in_interrupt_flag; -#endif - - if (current_SC->SCp.phase & in_arbitration) { - status = inb(port_base + TMC_Status); /* Read adapter status */ - if (!(status & 0x02)) { -#if EVERY_ACCESS - printk( " AFAIL " ); -#endif - spin_lock_irqsave(current_SC->device->host->host_lock, flags); - my_done( DID_BUS_BUSY << 16 ); - spin_unlock_irqrestore(current_SC->device->host->host_lock, flags); - return IRQ_HANDLED; - } - current_SC->SCp.phase = in_selection; - - outb(0x40 | FIFO_COUNT, port_base + Interrupt_Cntl); - - outb(0x82, port_base + SCSI_Cntl); /* Bus Enable + Select */ - outb(adapter_mask | (1 << scmd_id(current_SC)), port_base + SCSI_Data_NoACK); - - /* Stop arbitration and enable parity */ - outb(0x10 | PARITY_MASK, port_base + TMC_Cntl); -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; - } else if (current_SC->SCp.phase & in_selection) { - status = inb(port_base + SCSI_Status); - if (!(status & 0x01)) { - /* Try again, for slow devices */ - if (fdomain_select( scmd_id(current_SC) )) { -#if EVERY_ACCESS - printk( " SFAIL " ); -#endif - spin_lock_irqsave(current_SC->device->host->host_lock, flags); - my_done( DID_NO_CONNECT << 16 ); - spin_unlock_irqrestore(current_SC->device->host->host_lock, flags); - return IRQ_HANDLED; - } else { -#if EVERY_ACCESS - printk( " AltSel " ); -#endif - /* Stop arbitration and enable parity */ - outb(0x10 | PARITY_MASK, port_base + TMC_Cntl); - } - } - current_SC->SCp.phase = in_other; - outb(0x90 | FIFO_COUNT, port_base + Interrupt_Cntl); - outb(0x80, port_base + SCSI_Cntl); -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; - } - - /* current_SC->SCp.phase == in_other: this is the body of the routine */ - - status = inb(port_base + SCSI_Status); - - if (status & 0x10) { /* REQ */ - - switch (status & 0x0e) { - - case 0x08: /* COMMAND OUT */ - outb(current_SC->cmnd[current_SC->SCp.sent_command++], - port_base + Write_SCSI_Data); -#if EVERY_ACCESS - printk( "CMD = %x,", - current_SC->cmnd[ current_SC->SCp.sent_command - 1] ); -#endif - break; - case 0x00: /* DATA OUT -- tmc18c50/tmc18c30 only */ - if (chip != tmc1800 && !current_SC->SCp.have_data_in) { - current_SC->SCp.have_data_in = -1; - outb(0xd0 | PARITY_MASK, port_base + TMC_Cntl); - } - break; - case 0x04: /* DATA IN -- tmc18c50/tmc18c30 only */ - if (chip != tmc1800 && !current_SC->SCp.have_data_in) { - current_SC->SCp.have_data_in = 1; - outb(0x90 | PARITY_MASK, port_base + TMC_Cntl); - } - break; - case 0x0c: /* STATUS IN */ - current_SC->SCp.Status = inb(port_base + Read_SCSI_Data); -#if EVERY_ACCESS - printk( "Status = %x, ", current_SC->SCp.Status ); -#endif -#if ERRORS_ONLY - if (current_SC->SCp.Status - && current_SC->SCp.Status != 2 - && current_SC->SCp.Status != 8) { - printk( "scsi: <fdomain> target = %d, command = %x, status = %x\n", - current_SC->device->id, - current_SC->cmnd[0], - current_SC->SCp.Status ); - } -#endif - break; - case 0x0a: /* MESSAGE OUT */ - outb(MESSAGE_REJECT, port_base + Write_SCSI_Data); /* Reject */ - break; - case 0x0e: /* MESSAGE IN */ - current_SC->SCp.Message = inb(port_base + Read_SCSI_Data); -#if EVERY_ACCESS - printk( "Message = %x, ", current_SC->SCp.Message ); -#endif - if (!current_SC->SCp.Message) ++done; -#if DEBUG_MESSAGES || EVERY_ACCESS - if (current_SC->SCp.Message) { - printk( "scsi: <fdomain> message = %x\n", - current_SC->SCp.Message ); - } -#endif - break; - } - } - - if (chip == tmc1800 && !current_SC->SCp.have_data_in - && (current_SC->SCp.sent_command >= current_SC->cmd_len)) { - - if(current_SC->sc_data_direction == DMA_TO_DEVICE) - { - current_SC->SCp.have_data_in = -1; - outb(0xd0 | PARITY_MASK, port_base + TMC_Cntl); - } - else - { - current_SC->SCp.have_data_in = 1; - outb(0x90 | PARITY_MASK, port_base + TMC_Cntl); - } - } - - if (current_SC->SCp.have_data_in == -1) { /* DATA OUT */ - while ((data_count = FIFO_Size - inw(port_base + FIFO_Data_Count)) > 512) { -#if EVERY_ACCESS - printk( "DC=%d, ", data_count ) ; -#endif - if (data_count > current_SC->SCp.this_residual) - data_count = current_SC->SCp.this_residual; - if (data_count > 0) { -#if EVERY_ACCESS - printk( "%d OUT, ", data_count ); -#endif - if (data_count == 1) { - outb(*current_SC->SCp.ptr++, port_base + Write_FIFO); - --current_SC->SCp.this_residual; - } else { - data_count >>= 1; - outsw(port_base + Write_FIFO, current_SC->SCp.ptr, data_count); - current_SC->SCp.ptr += 2 * data_count; - current_SC->SCp.this_residual -= 2 * data_count; - } - } - if (!current_SC->SCp.this_residual) { - if (current_SC->SCp.buffers_residual) { - --current_SC->SCp.buffers_residual; - ++current_SC->SCp.buffer; - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - } else - break; - } - } - } - - if (current_SC->SCp.have_data_in == 1) { /* DATA IN */ - while ((data_count = inw(port_base + FIFO_Data_Count)) > 0) { -#if EVERY_ACCESS - printk( "DC=%d, ", data_count ); -#endif - if (data_count > current_SC->SCp.this_residual) - data_count = current_SC->SCp.this_residual; - if (data_count) { -#if EVERY_ACCESS - printk( "%d IN, ", data_count ); -#endif - if (data_count == 1) { - *current_SC->SCp.ptr++ = inb(port_base + Read_FIFO); - --current_SC->SCp.this_residual; - } else { - data_count >>= 1; /* Number of words */ - insw(port_base + Read_FIFO, current_SC->SCp.ptr, data_count); - current_SC->SCp.ptr += 2 * data_count; - current_SC->SCp.this_residual -= 2 * data_count; - } - } - if (!current_SC->SCp.this_residual - && current_SC->SCp.buffers_residual) { - --current_SC->SCp.buffers_residual; - ++current_SC->SCp.buffer; - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - } - } - } - - if (done) { -#if EVERY_ACCESS - printk( " ** IN DONE %d ** ", current_SC->SCp.have_data_in ); -#endif - -#if ERRORS_ONLY - if (current_SC->cmnd[0] == REQUEST_SENSE && !current_SC->SCp.Status) { - char *buf = scsi_sglist(current_SC); - if ((unsigned char)(*(buf + 2)) & 0x0f) { - unsigned char key; - unsigned char code; - unsigned char qualifier; - - key = (unsigned char)(*(buf + 2)) & 0x0f; - code = (unsigned char)(*(buf + 12)); - qualifier = (unsigned char)(*(buf + 13)); - - if (key != UNIT_ATTENTION - && !(key == NOT_READY - && code == 0x04 - && (!qualifier || qualifier == 0x02 || qualifier == 0x01)) - && !(key == ILLEGAL_REQUEST && (code == 0x25 - || code == 0x24 - || !code))) - - printk( "scsi: <fdomain> REQUEST SENSE" - " Key = %x, Code = %x, Qualifier = %x\n", - key, code, qualifier ); - } - } -#endif -#if EVERY_ACCESS - printk( "BEFORE MY_DONE. . ." ); -#endif - spin_lock_irqsave(current_SC->device->host->host_lock, flags); - my_done( (current_SC->SCp.Status & 0xff) - | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16) ); - spin_unlock_irqrestore(current_SC->device->host->host_lock, flags); -#if EVERY_ACCESS - printk( "RETURNING.\n" ); -#endif - - } else { - if (current_SC->SCp.phase & disconnect) { - outb(0xd0 | FIFO_COUNT, port_base + Interrupt_Cntl); - outb(0x00, port_base + SCSI_Cntl); - } else { - outb(0x90 | FIFO_COUNT, port_base + Interrupt_Cntl); - } - } -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; -} - -static int fdomain_16x0_queue_lck(struct scsi_cmnd *SCpnt, - void (*done)(struct scsi_cmnd *)) -{ - if (in_command) { - panic( "scsi: <fdomain> fdomain_16x0_queue() NOT REENTRANT!\n" ); - } -#if EVERY_ACCESS - printk( "queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n", - SCpnt->target, - *(unsigned char *)SCpnt->cmnd, - scsi_sg_count(SCpnt), - scsi_bufflen(SCpnt)); -#endif - - fdomain_make_bus_idle(); - - current_SC = SCpnt; /* Save this for the done function */ - current_SC->scsi_done = done; - - /* Initialize static data */ - - if (scsi_sg_count(current_SC)) { - current_SC->SCp.buffer = scsi_sglist(current_SC); - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - current_SC->SCp.buffers_residual = scsi_sg_count(current_SC) - 1; - } else { - current_SC->SCp.ptr = NULL; - current_SC->SCp.this_residual = 0; - current_SC->SCp.buffer = NULL; - current_SC->SCp.buffers_residual = 0; - } - - current_SC->SCp.Status = 0; - current_SC->SCp.Message = 0; - current_SC->SCp.have_data_in = 0; - current_SC->SCp.sent_command = 0; - current_SC->SCp.phase = in_arbitration; - - /* Start arbitration */ - outb(0x00, port_base + Interrupt_Cntl); - outb(0x00, port_base + SCSI_Cntl); /* Disable data drivers */ - outb(adapter_mask, port_base + SCSI_Data_NoACK); /* Set our id bit */ - ++in_command; - outb(0x20, port_base + Interrupt_Cntl); - outb(0x14 | PARITY_MASK, port_base + TMC_Cntl); /* Start arbitration */ - - return 0; -} - -static DEF_SCSI_QCMD(fdomain_16x0_queue) - -#if DEBUG_ABORT -static void print_info(struct scsi_cmnd *SCpnt) -{ - unsigned int imr; - unsigned int irr; - unsigned int isr; - - if (!SCpnt || !SCpnt->device || !SCpnt->device->host) { - printk(KERN_WARNING "scsi: <fdomain> Cannot provide detailed information\n"); - return; - } - - printk(KERN_INFO "%s\n", fdomain_16x0_info( SCpnt->device->host ) ); - print_banner(SCpnt->device->host); - switch (SCpnt->SCp.phase) { - case in_arbitration: printk("arbitration"); break; - case in_selection: printk("selection"); break; - case in_other: printk("other"); break; - default: printk("unknown"); break; - } - - printk( " (%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", - SCpnt->SCp.phase, - SCpnt->device->id, - *(unsigned char *)SCpnt->cmnd, - scsi_sg_count(SCpnt), - scsi_bufflen(SCpnt)); - printk( "sent_command = %d, have_data_in = %d, timeout = %d\n", - SCpnt->SCp.sent_command, - SCpnt->SCp.have_data_in, - SCpnt->timeout ); -#if DEBUG_RACE - printk( "in_interrupt_flag = %d\n", in_interrupt_flag ); -#endif - - imr = (inb( 0x0a1 ) << 8) + inb( 0x21 ); - outb( 0x0a, 0xa0 ); - irr = inb( 0xa0 ) << 8; - outb( 0x0a, 0x20 ); - irr += inb( 0x20 ); - outb( 0x0b, 0xa0 ); - isr = inb( 0xa0 ) << 8; - outb( 0x0b, 0x20 ); - isr += inb( 0x20 ); - - /* Print out interesting information */ - printk( "IMR = 0x%04x", imr ); - if (imr & (1 << interrupt_level)) - printk( " (masked)" ); - printk( ", IRR = 0x%04x, ISR = 0x%04x\n", irr, isr ); - - printk( "SCSI Status = 0x%02x\n", inb(port_base + SCSI_Status)); - printk( "TMC Status = 0x%02x", inb(port_base + TMC_Status)); - if (inb((port_base + TMC_Status) & 1)) - printk( " (interrupt)" ); - printk( "\n" ); - printk("Interrupt Status = 0x%02x", inb(port_base + Interrupt_Status)); - if (inb(port_base + Interrupt_Status) & 0x08) - printk( " (enabled)" ); - printk( "\n" ); - if (chip == tmc18c50 || chip == tmc18c30) { - printk("FIFO Status = 0x%02x\n", inb(port_base + FIFO_Status)); - printk( "Int. Condition = 0x%02x\n", - inb( port_base + Interrupt_Cond ) ); - } - printk( "Configuration 1 = 0x%02x\n", inb( port_base + Configuration1 ) ); - if (chip == tmc18c50 || chip == tmc18c30) - printk( "Configuration 2 = 0x%02x\n", - inb( port_base + Configuration2 ) ); -} -#endif - -static int fdomain_16x0_abort(struct scsi_cmnd *SCpnt) -{ -#if EVERY_ACCESS || ERRORS_ONLY || DEBUG_ABORT - printk( "scsi: <fdomain> abort " ); -#endif - - if (!in_command) { -#if EVERY_ACCESS || ERRORS_ONLY - printk( " (not in command)\n" ); -#endif - return FAILED; - } else printk( "\n" ); - -#if DEBUG_ABORT - print_info( SCpnt ); -#endif - - fdomain_make_bus_idle(); - current_SC->SCp.phase |= aborted; - current_SC->result = DID_ABORT << 16; - - /* Aborts are not done well. . . */ - my_done(DID_ABORT << 16); - return SUCCESS; -} - -int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt) -{ - unsigned long flags; - - local_irq_save(flags); - - outb(1, port_base + SCSI_Cntl); - do_pause( 2 ); - outb(0, port_base + SCSI_Cntl); - do_pause( 115 ); - outb(0, port_base + SCSI_Mode_Cntl); - outb(PARITY_MASK, port_base + TMC_Cntl); - - local_irq_restore(flags); - return SUCCESS; -} - -static int fdomain_16x0_biosparam(struct scsi_device *sdev, - struct block_device *bdev, - sector_t capacity, int *info_array) -{ - int drive; - int size = capacity; - unsigned long offset; - struct drive_info { - unsigned short cylinders; - unsigned char heads; - unsigned char sectors; - } i; - - /* NOTES: - The RAM area starts at 0x1f00 from the bios_base address. - - For BIOS Version 2.0: - - The drive parameter table seems to start at 0x1f30. - The first byte's purpose is not known. - Next is the cylinder, head, and sector information. - The last 4 bytes appear to be the drive's size in sectors. - The other bytes in the drive parameter table are unknown. - If anyone figures them out, please send me mail, and I will - update these notes. - - Tape drives do not get placed in this table. - - There is another table at 0x1fea: - If the byte is 0x01, then the SCSI ID is not in use. - If the byte is 0x18 or 0x48, then the SCSI ID is in use, - although tapes don't seem to be in this table. I haven't - seen any other numbers (in a limited sample). - - 0x1f2d is a drive count (i.e., not including tapes) - - The table at 0x1fcc are I/O ports addresses for the various - operations. I calculate these by hand in this driver code. - - - - For the ISA-200S version of BIOS Version 2.0: - - The drive parameter table starts at 0x1f33. - - WARNING: Assume that the table entry is 25 bytes long. Someone needs - to check this for the Quantum ISA-200S card. - - - - For BIOS Version 3.2: - - The drive parameter table starts at 0x1f70. Each entry is - 0x0a bytes long. Heads are one less than we need to report. - */ - - if (MAJOR(bdev->bd_dev) != SCSI_DISK0_MAJOR) { - printk("scsi: <fdomain> fdomain_16x0_biosparam: too many disks"); - return 0; - } - drive = MINOR(bdev->bd_dev) >> 4; - - if (bios_major == 2) { - switch (Quantum) { - case 2: /* ISA_200S */ - /* The value of 25 has never been verified. - It should probably be 15. */ - offset = 0x1f33 + drive * 25; - break; - case 3: /* ISA_250MG */ - offset = 0x1f36 + drive * 15; - break; - case 4: /* ISA_200S (another one) */ - offset = 0x1f34 + drive * 15; - break; - default: - offset = 0x1f31 + drive * 25; - break; - } - memcpy_fromio( &i, bios_mem + offset, sizeof( struct drive_info ) ); - info_array[0] = i.heads; - info_array[1] = i.sectors; - info_array[2] = i.cylinders; - } else if (bios_major == 3 - && bios_minor >= 0 - && bios_minor < 4) { /* 3.0 and 3.2 BIOS */ - memcpy_fromio( &i, bios_mem + 0x1f71 + drive * 10, - sizeof( struct drive_info ) ); - info_array[0] = i.heads + 1; - info_array[1] = i.sectors; - info_array[2] = i.cylinders; - } else { /* 3.4 BIOS (and up?) */ - /* This algorithm was provided by Future Domain (much thanks!). */ - unsigned char *p = scsi_bios_ptable(bdev); - - if (p && p[65] == 0xaa && p[64] == 0x55 /* Partition table valid */ - && p[4]) { /* Partition type */ - - /* The partition table layout is as follows: - - Start: 0x1b3h - Offset: 0 = partition status - 1 = starting head - 2 = starting sector and cylinder (word, encoded) - 4 = partition type - 5 = ending head - 6 = ending sector and cylinder (word, encoded) - 8 = starting absolute sector (double word) - c = number of sectors (double word) - Signature: 0x1fe = 0x55aa - - So, this algorithm assumes: - 1) the first partition table is in use, - 2) the data in the first entry is correct, and - 3) partitions never divide cylinders - - Note that (1) may be FALSE for NetBSD (and other BSD flavors), - as well as for Linux. Note also, that Linux doesn't pay any - attention to the fields that are used by this algorithm -- it - only uses the absolute sector data. Recent versions of Linux's - fdisk(1) will fill this data in correctly, and forthcoming - versions will check for consistency. - - Checking for a non-zero partition type is not part of the - Future Domain algorithm, but it seemed to be a reasonable thing - to do, especially in the Linux and BSD worlds. */ - - info_array[0] = p[5] + 1; /* heads */ - info_array[1] = p[6] & 0x3f; /* sectors */ - } else { - - /* Note that this new method guarantees that there will always be - less than 1024 cylinders on a platter. This is good for drives - up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */ - - if ((unsigned int)size >= 0x7e0000U) { - info_array[0] = 0xff; /* heads = 255 */ - info_array[1] = 0x3f; /* sectors = 63 */ - } else if ((unsigned int)size >= 0x200000U) { - info_array[0] = 0x80; /* heads = 128 */ - info_array[1] = 0x3f; /* sectors = 63 */ - } else { - info_array[0] = 0x40; /* heads = 64 */ - info_array[1] = 0x20; /* sectors = 32 */ - } - } - /* For both methods, compute the cylinders */ - info_array[2] = (unsigned int)size / (info_array[0] * info_array[1] ); - kfree(p); - } - - return 0; -} - -static int fdomain_16x0_release(struct Scsi_Host *shpnt) -{ - if (shpnt->irq) - free_irq(shpnt->irq, shpnt); - if (shpnt->io_port && shpnt->n_io_port) - release_region(shpnt->io_port, shpnt->n_io_port); - if (PCI_bus) - pci_dev_put(PCI_dev); - return 0; -} - -struct scsi_host_template fdomain_driver_template = { - .module = THIS_MODULE, - .name = "fdomain", - .proc_name = "fdomain", - .detect = fdomain_16x0_detect, - .info = fdomain_16x0_info, - .queuecommand = fdomain_16x0_queue, - .eh_abort_handler = fdomain_16x0_abort, - .eh_host_reset_handler = fdomain_16x0_host_reset, - .bios_param = fdomain_16x0_biosparam, - .release = fdomain_16x0_release, - .can_queue = 1, - .this_id = 6, - .sg_tablesize = 64, - .use_clustering = DISABLE_CLUSTERING, -}; - -#ifndef PCMCIA -#if defined(CONFIG_PCI) && defined(MODULE) - -static struct pci_device_id fdomain_pci_tbl[] = { - { PCI_VENDOR_ID_FD, PCI_DEVICE_ID_FD_36C70, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, - { } -}; -MODULE_DEVICE_TABLE(pci, fdomain_pci_tbl); -#endif -#define driver_template fdomain_driver_template -#include "scsi_module.c" - -#endif diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h deleted file mode 100644 index 5cbe86b573ae..000000000000 --- a/drivers/scsi/fdomain.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * fdomain.c -- Future Domain TMC-16x0 SCSI driver - * Author: Rickard E. Faith, faith@cs.unc.edu - * Copyright 1992-1996, 1998 Rickard E. Faith (faith@acm.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -extern struct scsi_host_template fdomain_driver_template; -extern int fdomain_setup(char *str); -extern struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt ); -extern int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt); diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index ecc855c550aa..2d435f105b16 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -19,15 +19,6 @@ config PCMCIA_AHA152X To compile this driver as a module, choose M here: the module will be called aha152x_cs. -config PCMCIA_FDOMAIN - tristate "Future Domain PCMCIA support" - help - Say Y here if you intend to attach this type of PCMCIA SCSI host - adapter to your computer. - - To compile this driver as a module, choose M here: the - module will be called fdomain_cs. - config PCMCIA_NINJA_SCSI tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support" depends on !64BIT diff --git a/drivers/scsi/pcmcia/Makefile b/drivers/scsi/pcmcia/Makefile index 44eea2d43143..faa87a4b2d2b 100644 --- a/drivers/scsi/pcmcia/Makefile +++ b/drivers/scsi/pcmcia/Makefile @@ -4,11 +4,9 @@ ccflags-y := -Idrivers/scsi # 16-bit client drivers obj-$(CONFIG_PCMCIA_QLOGIC) += qlogic_cs.o -obj-$(CONFIG_PCMCIA_FDOMAIN) += fdomain_cs.o obj-$(CONFIG_PCMCIA_AHA152X) += aha152x_cs.o obj-$(CONFIG_PCMCIA_NINJA_SCSI) += nsp_cs.o obj-$(CONFIG_PCMCIA_SYM53C500) += sym53c500_cs.o aha152x_cs-objs := aha152x_stub.o aha152x_core.o -fdomain_cs-objs := fdomain_stub.o fdomain_core.o qlogic_cs-objs := qlogic_stub.o diff --git a/drivers/scsi/pcmcia/fdomain_core.c b/drivers/scsi/pcmcia/fdomain_core.c deleted file mode 100644 index a48913791868..000000000000 --- a/drivers/scsi/pcmcia/fdomain_core.c +++ /dev/null @@ -1,2 +0,0 @@ -#define PCMCIA 1 -#include "fdomain.c" diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c deleted file mode 100644 index 953a792150ae..000000000000 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ /dev/null @@ -1,209 +0,0 @@ -/*====================================================================== - - A driver for Future Domain-compatible PCMCIA SCSI cards - - fdomain_cs.c 1.47 2001/10/13 00:08:52 - - The contents of this file are subject to the Mozilla Public - License Version 1.1 (the "License"); you may not use this file - except in compliance with the License. You may obtain a copy of - the License at http://www.mozilla.org/MPL/ - - Software distributed under the License is distributed on an "AS - IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - implied. See the License for the specific language governing - rights and limitations under the License. - - The initial developer of the original code is David A. Hinds - <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - - Alternatively, the contents of this file may be used under the - terms of the GNU General Public License version 2 (the "GPL"), in - which case the provisions of the GPL are applicable instead of the - above. If you wish to allow the use of your version of this file - only under the terms of the GPL and not to allow others to use - your version of this file under the MPL, indicate your decision - by deleting the provisions above and replace them with the notice - and other provisions required by the GPL. If you do not delete - the provisions above, a recipient may use your version of this - file under either the MPL or the GPL. - -======================================================================*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <scsi/scsi.h> -#include <linux/major.h> -#include <linux/blkdev.h> -#include <scsi/scsi_ioctl.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "fdomain.h" - -#include <pcmcia/cistpl.h> -#include <pcmcia/ds.h> - -/*====================================================================*/ - -/* Module parameters */ - -MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); -MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver"); -MODULE_LICENSE("Dual MPL/GPL"); - -/*====================================================================*/ - -typedef struct scsi_info_t { - struct pcmcia_device *p_dev; - struct Scsi_Host *host; -} scsi_info_t; - - -static void fdomain_release(struct pcmcia_device *link); -static void fdomain_detach(struct pcmcia_device *p_dev); -static int fdomain_config(struct pcmcia_device *link); - -static int fdomain_probe(struct pcmcia_device *link) -{ - scsi_info_t *info; - - dev_dbg(&link->dev, "fdomain_attach()\n"); - - /* Create new SCSI device */ - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->p_dev = link; - link->priv = info; - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; - link->config_regs = PRESENT_OPTION; - - return fdomain_config(link); -} /* fdomain_attach */ - -/*====================================================================*/ - -static void fdomain_detach(struct pcmcia_device *link) -{ - dev_dbg(&link->dev, "fdomain_detach\n"); - - fdomain_release(link); - - kfree(link->priv); -} /* fdomain_detach */ - -/*====================================================================*/ - -static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - p_dev->io_lines = 10; - p_dev->resource[0]->end = 0x10; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - return pcmcia_request_io(p_dev); -} - - -static int fdomain_config(struct pcmcia_device *link) -{ - scsi_info_t *info = link->priv; - int ret; - char str[22]; - struct Scsi_Host *host; - - dev_dbg(&link->dev, "fdomain_config\n"); - - ret = pcmcia_loop_config(link, fdomain_config_check, NULL); - if (ret) - goto failed; - - if (!link->irq) - goto failed; - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - /* A bad hack... */ - release_region(link->resource[0]->start, resource_size(link->resource[0])); - - /* Set configuration options for the fdomain driver */ - sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq); - fdomain_setup(str); - - host = __fdomain_16x0_detect(&fdomain_driver_template); - if (!host) { - printk(KERN_INFO "fdomain_cs: no SCSI devices found\n"); - goto failed; - } - - if (scsi_add_host(host, NULL)) - goto failed; - scsi_scan_host(host); - - info->host = host; - - return 0; - -failed: - fdomain_release(link); - return -ENODEV; -} /* fdomain_config */ - -/*====================================================================*/ - -static void fdomain_release(struct pcmcia_device *link) -{ - scsi_info_t *info = link->priv; - - dev_dbg(&link->dev, "fdomain_release\n"); - - scsi_remove_host(info->host); - pcmcia_disable_device(link); - scsi_unregister(info->host); -} - -/*====================================================================*/ - -static int fdomain_resume(struct pcmcia_device *link) -{ - fdomain_16x0_host_reset(NULL); - - return 0; -} - -static const struct pcmcia_device_id fdomain_ids[] = { - PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "SCSI PCMCIA Card", 0xe3736c88, 0x859cad20), - PCMCIA_DEVICE_PROD_ID1("SCSI PCMCIA Adapter Card", 0x8dacb57e), - PCMCIA_DEVICE_PROD_ID12(" SIMPLE TECHNOLOGY Corporation", "SCSI PCMCIA Credit Card Controller", 0x182bdafe, 0xc80d106f), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, fdomain_ids); - -static struct pcmcia_driver fdomain_cs_driver = { - .owner = THIS_MODULE, - .name = "fdomain_cs", - .probe = fdomain_probe, - .remove = fdomain_detach, - .id_table = fdomain_ids, - .resume = fdomain_resume, -}; - -static int __init init_fdomain_cs(void) -{ - return pcmcia_register_driver(&fdomain_cs_driver); -} - -static void __exit exit_fdomain_cs(void) -{ - pcmcia_unregister_driver(&fdomain_cs_driver); -} - -module_init(init_fdomain_cs); -module_exit(exit_fdomain_cs); |