Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The most noteworthy SoC driver changes this time include:

   - The TEE subsystem gains an in-kernel interface to access the TEE
     from device drivers.

   - The reset controller subsystem gains a driver for the Qualcomm
     Snapdragon 845 Power Domain Controller.

   - The Xilinx Zynq platform now has a firmware interface for its
     platform management unit. This contains a firmware "ioctl"
     interface that was a little controversial at first, but the version
     we merged solved that by not exposing arbitrary firmware calls to
     user space.

   - The Amlogic Meson platform gains a "canvas" driver that is used for
     video processing and shared between different high-level drivers.

  The rest is more of the usual, mostly related to SoC specific power
  management support and core drivers in drivers/soc:

   - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
     features related to power and reset control.

   - The Mediatek mt8183 and mt6765 SoC platforms gain support for their
     respective power management chips.

   - A new driver for NXP i.MX8, which need a firmware interface for
     power management.

   - The SCPI firmware interface now contains support estimating power
     usage of performance states

   - The NVIDIA Tegra "pmc" driver gains a few new features, in
     particular a pinctrl interface for configuring the pads.

   - Lots of small changes for Qualcomm, in particular the "smem" device
     driver.

   - Some cleanups for the TI OMAP series related to their sysc
     controller.

  Additional cleanups and bugfixes in SoC specific drivers include the
  Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
  firmware: tegra: bpmp: Implement suspend/resume support
  drivers: clk: Add ZynqMP clock driver
  dt-bindings: clock: Add bindings for ZynqMP clock driver
  firmware: xilinx: Add zynqmp IOCTL API for device control
  Documentation: xilinx: Add documentation for eemi APIs
  MAINTAINERS: imx: include drivers/firmware/imx path
  firmware: imx: add misc svc support
  firmware: imx: add SCU firmware driver support
  reset: Fix potential use-after-free in __of_reset_control_get()
  dt-bindings: arm: fsl: add scu binding doc
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  reset: qcom: PDC Global (Power Domain Controller) reset controller
  dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
  reset: Grammar s/more then once/more than once/
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  ...

3 files changed, 204 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
new file mode 100644
index 000000000000..46d0af1f0872
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -0,0 +1,183 @@
+NXP i.MX System Controller Firmware (SCFW)
+--------------------------------------------------------------------
+
+The System Controller Firmware (SCFW) is a low-level system function
+which runs on a dedicated Cortex-M core to provide power, clock, and
+resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+(QM, QP), and i.MX8QX (QXP, DX).
+
+The AP communicates with the SC using a multi-ported MU module found
+in the LSIO subsystem. The current definition of this MU module provides
+5 remote AP connections to the SC to support up to 5 execution environments
+(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+using the MSI bus.
+
+System Controller Device Node:
+============================================================
+
+The scu node with the following properties shall be under the /firmware/ node.
+
+Required properties:
+-------------------
+- compatible:	should be "fsl,imx-scu".
+- mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
+			       "rx0", "rx1", "rx2", "rx3".
+- mboxes:	List of phandle of 4 MU channels for tx and 4 MU channels
+		for rx. All 8 MU channels must be in the same MU instance.
+		Cross instances are not allowed. The MU instance can only
+		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
+		to make sure use the one which is not conflict with other
+		execution environments. e.g. ATF.
+		Note:
+		Channel 0 must be "tx0" or "rx0".
+		Channel 1 must be "tx1" or "rx1".
+		Channel 2 must be "tx2" or "rx2".
+		Channel 3 must be "tx3" or "rx3".
+		e.g.
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 0 1
+			  &lsio_mu1 0 2
+			  &lsio_mu1 0 3
+			  &lsio_mu1 1 0
+			  &lsio_mu1 1 1
+			  &lsio_mu1 1 2
+			  &lsio_mu1 1 3>;
+		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+		for detailed mailbox binding.
+
+i.MX SCU Client Device Node:
+============================================================
+
+Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+Power domain bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding for the SCU power domain providers uses the generic power
+domain binding[2].
+
+Required properties:
+- compatible:		Should be "fsl,scu-pd".
+- #address-cells:	Should be 1.
+- #size-cells:		Should be 0.
+
+Required properties for power domain sub nodes:
+- #power-domain-cells:	Must be 0.
+
+Optional Properties:
+- reg:			Resource ID of this power domain.
+			No exist means uncontrollable by user.
+			See detailed Resource ID list from:
+			include/dt-bindings/power/imx-rsrc.h
+- power-domains:	phandle pointing to the parent power domain.
+
+Clock bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Required properties:
+- compatible:		Should be "fsl,imx8qxp-clock".
+- #clock-cells:		Should be 1. Contains the Clock ID value.
+- clocks:		List of clock specifiers, must contain an entry for
+			each required entry in clock-names
+- clock-names:		Should include entries "xtal_32KHz", "xtal_24MHz"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+
+See the full list of clock IDs from:
+include/dt-bindings/clock/imx8qxp-clock.h
+
+Pinctrl bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the i.MX common pinctrl binding[3].
+
+Required properties:
+- compatible:		Should be "fsl,imx8qxp-iomuxc".
+
+Required properties for Pinctrl sub nodes:
+- fsl,pins:		Each entry consists of 3 integers which represents
+			the mux and config setting for one pin. The first 2
+			integers <pin_id mux_mode> are specified using a
+			PIN_FUNC_ID macro, which can be found in
+			<dt-bindings/pinctrl/pads-imx8qxp.h>.
+			The last integer CONFIG is the pad setting value like
+			pull-up on this pin.
+
+			Please refer to i.MX8QXP Reference Manual for detailed
+			CONFIG settings.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+
+Example (imx8qxp):
+-------------
+lsio_mu1: mailbox@5d1c0000 {
+	...
+	#mbox-cells = <2>;
+};
+
+firmware {
+	scu {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0", "tx1", "tx2", "tx3",
+			     "rx0", "rx1", "rx2", "rx3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 0 1
+			  &lsio_mu1 0 2
+			  &lsio_mu1 0 3
+			  &lsio_mu1 1 0
+			  &lsio_mu1 1 1
+			  &lsio_mu1 1 2
+			  &lsio_mu1 1 3>;
+
+		clk: clk {
+			compatible = "fsl,imx8qxp-clk";
+			#clock-cells = <1>;
+		};
+
+		iomuxc {
+			compatible = "fsl,imx8qxp-iomuxc";
+
+			pinctrl_lpuart0: lpuart0grp {
+				fsl,pins = <
+					SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
+					SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
+				>;
+			};
+			...
+		};
+
+		imx8qx-pm {
+			compatible = "fsl,scu-pd";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_dma: dma-power-domain {
+				#power-domain-cells = <0>;
+
+				pd_dma_lpuart0: dma-lpuart0@57 {
+					reg = <SC_R_UART_0>;
+					#power-domain-cells = <0>;
+					power-domains = <&pd_dma>;
+				};
+				...
+			};
+			...
+		};
+	};
+};
+
+serial@5a060000 {
+	...
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	clocks = <&clk IMX8QXP_UART0_CLK>,
+		 <&clk IMX8QXP_UART0_IPG_CLK>;
+	clock-names = "per", "ipg";
+	power-domains = <&pd_dma_lpuart0>;
+};
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
index 31f5f9a104cc..b56a02c10ae6 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
@@ -45,11 +45,15 @@ Optional Properties:
 	debug_messages - Map the Debug message region
 - reg:  register space corresponding to the debug_messages
 - ti,system-reboot-controller: If system reboot can be triggered by SoC reboot
+- ti,host-id: Integer value corresponding to the host ID assigned by Firmware
+	for identification of host processing entities such as virtual
+	machines
 
 Example (K2G):
 -------------
 	pmmc: pmmc {
 		compatible = "ti,k2g-sci";
+		ti,host-id = <2>;
 		mbox-names = "rx", "tx";
 		mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>,
 			<&msgmgr &msgmgr_proxy_pmmc_tx>;
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
index 5e85749262ae..eaee06b2d8f2 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -16,11 +16,26 @@ Properties:
 - reg:
 	Usage: required
 	Value Type: <prop-encoded-array>
-	Definition: Start address and the the size of the register region.
+	Definition: The first element specifies the llcc base start address and
+		    the size of the register region. The second element specifies
+		    the llcc broadcast base address and size of the register region.
+
+- reg-names:
+        Usage: required
+        Value Type: <stringlist>
+        Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base".
+
+- interrupts:
+	Usage: required
+	Definition: The interrupt is associated with the llcc edac device.
+			It's used for llcc cache single and double bit error detection
+			and reporting.
 
 Example:
 
 	cache-controller@1100000 {
 		compatible = "qcom,sdm845-llcc";
-		reg = <0x1100000 0x250000>;
+		reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
+		reg-names = "llcc_base", "llcc_broadcast_base";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 	};