Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...

8 files changed, 23 insertions, 23 deletions

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
index 687c8c170cd4..acd2ed391b2f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -54,7 +54,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8250-dpu";
@@ -72,7 +72,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8250_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
index 368d3db0ce96..5cfb9b917e90 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8250-mdss";
@@ -121,7 +121,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -196,7 +196,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -286,7 +286,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
index 120500395c9a..1a4e03531a1b 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -51,7 +51,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8350.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8350-dpu";
@@ -76,7 +76,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8350_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
index f2cbeb435f1b..8c89fb7fc8a3 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -81,7 +81,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8350-mdss";
@@ -134,7 +134,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -203,7 +203,7 @@ examples:
                                  <&mdss_dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&mdss_dsi0_phy>;
 
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
index 0d17ece1c453..da3fd66c564f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -58,7 +58,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8450-dpu";
@@ -83,7 +83,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8450_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
index 494e2a080e99..cfad5049a966 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8450-mdss";
@@ -130,7 +130,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -210,7 +210,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -305,7 +305,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
index ff58a747bb6f..99908fbe74f0 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -57,7 +57,7 @@ examples:
     #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
     #include <dt-bindings/clock/qcom,sm8550-gcc.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8550-dpu";
@@ -82,7 +82,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8550_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
index 70ce7cb7a80d..5390a8e79ad3 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8550-mdss";
@@ -130,7 +130,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -205,7 +205,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -294,7 +294,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";