diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2016-04-14 10:45:21 +0200 |
---|---|---|
committer | Jonathan Cameron <jic23@kernel.org> | 2016-04-19 19:58:13 +0100 |
commit | 0e6f6871a1591f4bb0971809c45bc91a991f1967 (patch) | |
tree | 45aa87a59f586c7aff129809ca3cc017b4d36895 /Documentation/devicetree/bindings/iio | |
parent | 97865fe41322d83dac4373fe0a0de5b1a1b318c5 (diff) | |
download | linux-stable-0e6f6871a1591f4bb0971809c45bc91a991f1967.tar.gz linux-stable-0e6f6871a1591f4bb0971809c45bc91a991f1967.tar.bz2 linux-stable-0e6f6871a1591f4bb0971809c45bc91a991f1967.zip |
iio: st_sensors: support open drain mode
Some types of ST Sensors can be connected to the same IRQ line
as other peripherals using open drain. Add a device tree binding
and a sensor data property to flip the right bit in the interrupt
control register to enable open drain mode on the INT line.
If the line is set to be open drain, also tag on IRQF_SHARED
to the IRQ flags when requesting the interrupt, as the whole
point of using open drain interrupt lines is to share them with
more than one peripheral (wire-or).
Cc: devicetree@vger.kernel.org
Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Acked-by: Rob Herring <rob@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
-rw-r--r-- | Documentation/devicetree/bindings/iio/st-sensors.txt | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 71b7bdff21cd..637e283f4a8b 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -16,6 +16,10 @@ Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). This property is not configurable on all sensors. +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt) + This is a boolean property. Sensors may also have applicable pin control settings, those use the standard bindings from pinctrl/pinctrl-bindings.txt. |