summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/mdio.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-07-11 18:35:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-07-11 18:35:30 -0700
commitd06e4156430e7c5eb4f04dabcaa0d9e2fba335e3 (patch)
tree6a8e0663a501b321655dd12683a48635474c28f0 /Documentation/devicetree/bindings/net/mdio.txt
parent8931084c0d017314ad025f19353f7c5c1d3782d8 (diff)
parentf59d261180f3b66367962f1974090815ce710056 (diff)
downloadlinux-stable-d06e4156430e7c5eb4f04dabcaa0d9e2fba335e3.tar.gz
linux-stable-d06e4156430e7c5eb4f04dabcaa0d9e2fba335e3.tar.bz2
linux-stable-d06e4156430e7c5eb4f04dabcaa0d9e2fba335e3.zip
Merge tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring: - DT binding schema examples are now validated against the schemas. Various examples are fixed due to that. - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73 - Initial schemas for networking bindings. This includes ethernet, phy and mdio common bindings with several Allwinner and stmmac converted to the schema. - Conversion of more Arm top-level SoC/board bindings to DT schema - Conversion of PSCI binding to DT schema - Rework Arm CPU schema to coexist with other CPU schemas - Add a bunch of missing vendor prefixes and new ones for SoChip, Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif - Add Mediatek UART RX wakeup support to binding - Add reset to ST UART binding - Remove some Linuxisms from the endianness common-properties.txt binding - Make the flattened DT read-only after init - Ignore disabled reserved memory nodes - Clean-up some dead code in FDT functions * tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: vendor-prefixes: add Sipeed dt-bindings: vendor-prefixes: add SoChip dt-bindings: 83xx-512x-pci: Drop cell-index property dt-bindings: serial: add documentation for Rx in-band wakeup support dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema of: unittest: simplify getting the adapter of a client of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap of/platform: Drop superfluous cast in of_device_make_bus_id() dt-bindings: usb: ehci: Fix example warnings dt-bindings: net: Use phy-mode instead of phy-connection-type dt-bindings: simple-framebuffer: Add requirement for pipelines dt-bindings: display: Fix simple-framebuffer example dt-bindings: net: mdio: Add child nodes dt-bindings: net: mdio: Add address and size cells dt-bindings: net: mdio: Add a nodename pattern dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes dt-bindings: backlight: lm3630a: correct schema validation dt-bindings: net: dwmac: Deprecate the PHY reset properties dt-bindings: net: sun8i-emac: Convert the binding to a schemas ...
Diffstat (limited to 'Documentation/devicetree/bindings/net/mdio.txt')
-rw-r--r--Documentation/devicetree/bindings/net/mdio.txt38
1 files changed, 1 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt
index e3e1603f256c..cf8a0105488e 100644
--- a/Documentation/devicetree/bindings/net/mdio.txt
+++ b/Documentation/devicetree/bindings/net/mdio.txt
@@ -1,37 +1 @@
-Common MDIO bus properties.
-
-These are generic properties that can apply to any MDIO bus.
-
-Optional properties:
-- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO
- bus.
-- reset-delay-us: RESET pulse width in microseconds.
-
-A list of child nodes, one per device on the bus is expected. These
-should follow the generic phy.txt, or a device specific binding document.
-
-The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and
-applies to all PHY devices. It must therefore be appropriately determined based
-on all PHY requirements (maximum value of all per-PHY RESET pulse widths).
-
-Example :
-This example shows these optional properties, plus other properties
-required for the TI Davinci MDIO driver.
-
- davinci_mdio: ethernet@5c030000 {
- compatible = "ti,davinci_mdio";
- reg = <0x5c030000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2>;
-
- ethphy0: ethernet-phy@1 {
- reg = <1>;
- };
-
- ethphy1: ethernet-phy@3 {
- reg = <3>;
- };
- };
+This file has moved to mdio.yaml.