Merge branch 'remotes/lorenzo/pci/dwc'

- Fix n_fts[] array overrun (Vidya Sagar)

- Don't advertise PTM Responder role for Endpoints (Vidya Sagar)

- Fix qcom "reset assert" error message (Manivannan Sadhasivam)

- Downgrade "link didn't come up" message to dev_info (Vidya Sagar)

- Initialize PHY before deasserting core reset so the link comes up on
  boards where the PHY provides the reference clock (this was a regression
  in v6.0) (Sascha Hauer)

- Switch histb to the gpiod API (Dmitry Torokhov)

- Fix imx6sx and imx8mq clock names in DT binding (Serge Semin)

- Fix visconti MSI interrupt in DT binding (Serge Semin)

- Consolidate reset-gpio, cdm, windows info in common DT shared by both
  Root Port and Endpoint bindings (Serge Semin)

- Remove bus node from DT examples (Serge Semin)

- Add common phys, phy-names to DT (Serge Semin)

- Add default max-link-speed of Gen5 to DT (Serge Semin)

- Apply generic schema for generic device  (Serge Semin)

- Add default max-functions of 32 to DT (Serge Semin)

- Add common interrupts, interrupt-names to DT (Serge Semin)

- Add common regs, reg-names to DT (Serge Semin)

- Add common clocks, resets to DT (Serge Semin)

- Add dma-coherent to DT (Serge Semin)

- Apply common schema to Rockchip DT (Serge Semin)

- Add Baikal-T1 DT bindings (Serge Semin)

- Add dma-ranges support in DesignWare core (Serge Semin)

- Add dw_pcie_cap_is() for testing controller capabilities (Serge Semin)

- Add generic resources getter to DesignWare core (Serge Semin)

- Combine iATU detection procedures (Serge Semin)

- Add generic clock and reset names to DesignWare core (Serge Semin)

- Add Baikal-T1 PCIe controller driver (Serge Semin)

* remotes/lorenzo/pci/dwc:
  PCI: dwc: Add Baikal-T1 PCIe controller support
  PCI: dwc: Introduce generic platform clocks and resets
  PCI: dwc: Combine iATU detection procedures
  PCI: dwc: Introduce generic resources getter
  PCI: dwc: Introduce generic controller capabilities interface
  PCI: dwc: Introduce dma-ranges property support for RC-host
  dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings
  dt-bindings: PCI: dwc: Apply common schema to Rockchip DW PCIe nodes
  dt-bindings: PCI: dwc: Add dma-coherent property
  dt-bindings: PCI: dwc: Add clocks/resets common properties
  dt-bindings: PCI: dwc: Add reg/reg-names common properties
  dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties
  dt-bindings: PCI: dwc: Add max-functions EP property
  dt-bindings: PCI: dwc: Apply generic schema for generic device only
  dt-bindings: PCI: dwc: Add max-link-speed common property
  dt-bindings: PCI: dwc: Add phys/phy-names common properties
  dt-bindings: PCI: dwc: Remove bus node from the examples
  dt-bindings: PCI: dwc: Detach common RP/EP DT bindings
  dt-bindings: visconti-pcie: Fix interrupts array max constraints
  dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq
  PCI: histb: Switch to using gpiod API
  PCI: imx6: Initialize PHY before deasserting core reset
  PCI: dwc: Use dev_info for PCIe link down event logging
  PCI: qcom: Fix error message for reset_control_assert()
  PCI: designware-ep: Disable PTM capabilities for EP mode
  PCI: Add PCI_PTM_CAP_RES macro
  PCI: dwc: Fix n_fts[] array overrun

7 files changed, 834 insertions, 129 deletions

diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
new file mode 100644
index 000000000000..8eaa07ae9774
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PCIe Root Port Controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  Embedded into Baikal-T1 SoC Root Complex controller with a single port
+  activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured
+  to have just a single Root Port function and is capable of establishing the
+  link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset
+  control module, so the proper interface initialization is supposed to be
+  performed by software. There four in- and four outbound iATU regions
+  which can be used to emit all required TLP types on the PCIe bus.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-pcie
+
+  reg:
+    description:
+      DBI, DBI2 and at least 4KB outbound iATU-capable region for the
+      peripheral devices CFG-space access.
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: config
+
+  interrupts:
+    description:
+      MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
+      request and eight Read/Write eDMA IRQ lines are available.
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: dma0
+      - const: dma1
+      - const: dma2
+      - const: dma3
+      - const: dma4
+      - const: dma5
+      - const: dma6
+      - const: dma7
+      - const: msi
+      - const: aer
+      - const: pme
+      - const: hp
+      - const: bw_mg
+      - const: l_eq
+
+  clocks:
+    description:
+      DBI (attached to the APB bus), AXI-bus master and slave interfaces
+      are fed up by the dedicated application clocks. A common reference
+      clock signal is supposed to be attached to the corresponding Ref-pad
+      of the SoC. It will be redistributed amongst the controller core
+      sub-modules (pipe, core, aux, etc).
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+      - const: ref
+
+  resets:
+    description:
+      A comprehensive controller reset logic is supposed to be implemented
+      by software, so almost all the possible application and core reset
+      signals are exposed via the system CCU module.
+    maxItems: 9
+
+  reset-names:
+    items:
+      - const: mstr
+      - const: slv
+      - const: pwr
+      - const: hot
+      - const: phy
+      - const: core
+      - const: pipe
+      - const: sticky
+      - const: non-sticky
+
+  baikal,bt1-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the Baikal-T1 System Controller DT node. It's required to
+      access some additional PM, Reset-related and LTSSM signals.
+
+  num-lanes:
+    maximum: 4
+
+  max-link-speed:
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    pcie@1f052000 {
+      compatible = "baikal,bt1-pcie";
+      device_type = "pci";
+      reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>;
+      reg-names = "dbi", "dbi2", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>,
+               <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "dma0", "dma1", "dma2", "dma3",
+                        "dma4", "dma5", "dma6", "dma7",
+                        "msi", "aer", "pme", "hp", "bw_mg",
+                        "l_eq";
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>;
+      clock-names = "dbi", "mstr", "slv", "ref";
+
+      resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>,
+               <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>,
+               <&ccu_sys 9>;
+      reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
+                    "sticky", "non-sticky";
+
+      reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>;
+
+      num-lanes = <4>;
+      max-link-speed = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 376e739bcad4..49b4f7a32e71 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
     enum:
@@ -61,7 +58,7 @@ properties:
       - const: pcie
       - const: pcie_bus
       - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+      - enum: [ pcie_inbound_axi, pcie_aux ]
 
   num-lanes:
     const: 1
@@ -175,6 +172,47 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_inbound_axi
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index bc0a9d1db750..2be72ae1169f 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -14,10 +14,10 @@ maintainers:
 description: |+
   RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
   PCIe IP and thus inherits all the common properties defined in
-  designware-pcie.txt.
+  snps,dw-pcie.yaml.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
new file mode 100644
index 000000000000..d87e13496834
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC PCIe RP/EP controller
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description:
+  Generic Synopsys DesignWare PCIe Root Port and Endpoint controller
+  properties.
+
+select: false
+
+properties:
+  reg:
+    description:
+      DWC PCIe CSR space is normally accessed over the dedicated Data Bus
+      Interface - DBI. In accordance with the reference manual the register
+      configuration space belongs to the Configuration-Dependent Module (CDM)
+      and is split up into several sub-parts Standard PCIe configuration
+      space, Port Logic Registers (PL), Shadow Config-space Registers,
+      iATU/eDMA registers. The particular sub-space is selected by the
+      CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such
+      configuration provides a flexible interface for the system engineers to
+      either map the particular space at a desired MMIO address or just leave
+      them in a contiguous memory space if pure Native or AXI Bridge DBI access
+      is selected. Note the PCIe CFG-space, PL and Shadow registers are
+      specific for each activated function, while the rest of the sub-spaces
+      are common for all of them (if there are more than one).
+    minItems: 2
+    maxItems: 6
+
+  reg-names:
+    minItems: 2
+    maxItems: 6
+
+  interrupts:
+    description:
+      There are two main sub-blocks which are normally capable of
+      generating interrupts. It's System Information Interface and MSI
+      interface. While the former one has some common for the Host and
+      Endpoint controllers IRQ-signals, the later interface is obviously
+      Root Complex specific since it's responsible for the incoming MSI
+      messages signalling. The System Information IRQ signals are mainly
+      responsible for reporting the generic PCIe hierarchy and Root
+      Complex events like VPD IO request, general AER, PME, Hot-plug, link
+      bandwidth change, link equalization request, INTx asserted/deasserted
+      Message detection, embedded DMA Tx/Rx/Error.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+
+  clocks:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the clocks required
+      to get the controller working correctly. In general all of them can
+      be divided into two groups':' application and core clocks. Note the
+      platforms may have some of the clock sources unspecified in case if the
+      corresponding domains are fed up from a common clock source.
+    minItems: 1
+    maxItems: 7
+
+  clock-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      oneOf:
+        - description:
+            Data Bus Interface (DBI) clock. Clock signal for the AXI-bus
+            interface of the Configuration-Dependent Module, which is
+            basically the set of the controller CSRs.
+          const: dbi
+        - description:
+            Application AXI-bus Master interface clock. Basically this is
+            a clock for the controller DMA interface (PCI-to-CPU).
+          const: mstr
+        - description:
+            Application AXI-bus Slave interface clock. This is a clock for
+            the CPU-to-PCI memory IO interface.
+          const: slv
+        - description:
+            Controller Core-PCS PIPE interface clock. It's normally
+            supplied by an external PCS-PHY.
+          const: pipe
+        - description:
+            Controller Primary clock. It's assumed that all controller input
+            signals (except resets) are synchronous to this clock.
+          const: core
+        - description:
+            Auxiliary clock for the controller PMC domain. The controller
+            partitioning implies having some parts to operate with this
+            clock in some power management states.
+          const: aux
+        - description:
+            Generic reference clock. In case if there are several
+            interfaces fed up with a common clock source it's advisable to
+            define it with this name (for instance pipe, core and aux can
+            be connected to a single source of the periodic signal).
+          const: ref
+        - description:
+            Clock for the PHY registers interface. Originally this is
+            a PHY-viewport-based interface, but some platform may have
+            specifically designed one.
+          const: phy_reg
+        - description:
+            Vendor-specific clock names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'dbi' clock for details
+              enum: [ pcie, pcie_apb_sys, aclk_dbi ]
+            - description: See native 'mstr/slv' clock for details
+              enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
+            - description: See native 'pipe' clock for details
+              enum: [ pcie_phy, pcie_phy_ref, link ]
+            - description: See native 'aux' clock for details
+              enum: [ pcie_aux ]
+            - description: See native 'ref' clock for details.
+              enum: [ gio ]
+            - description: See nativs 'phy_reg' clock for details
+              enum: [ pcie_apb_phy, pclk ]
+
+  resets:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the reset
+      signals required to be de-asserted to properly activate the controller
+      sub-parts. All of these signals can be divided into two sub-groups':'
+      application and core resets with respect to the main sub-domains they
+      are supposed to reset. Note the platforms may have some of these signals
+      unspecified in case if they are automatically handled or aggregated into
+      a comprehensive control module.
+    minItems: 1
+    maxItems: 10
+
+  reset-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      oneOf:
+        - description: Data Bus Interface (DBI) domain reset
+          const: dbi
+        - description: AXI-bus Master interface reset
+          const: mstr
+        - description: AXI-bus Slave interface reset
+          const: slv
+        - description: Application-dependent interface reset
+          const: app
+        - description: Controller Non-sticky CSR flags reset
+          const: non-sticky
+        - description: Controller sticky CSR flags reset
+          const: sticky
+        - description: PIPE-interface (Core-PCS) logic reset
+          const: pipe
+        - description:
+            Controller primary reset (resets everything except PMC module)
+          const: core
+        - description: PCS/PHY block reset
+          const: phy
+        - description: PMC hot reset signal
+          const: hot
+        - description: Cold reset signal
+          const: pwr
+        - description:
+            Vendor-specific reset names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'app' reset for details
+              enum: [ apps, gio, apb ]
+            - description: See native 'phy' reset for details
+              enum: [ pciephy, link ]
+            - description: See native 'pwr' reset for details
+              enum: [ turnoff ]
+
+  phys:
+    description:
+      There can be up to the number of possible lanes PHYs specified placed in
+      the phandle array in the line-based order. Obviously each the specified
+      PHYs are supposed to be able to work in the PCIe mode with a speed
+      implied by the DWC PCIe controller they are attached to.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    minItems: 1
+    maxItems: 16
+    oneOf:
+      - description: Generic PHY names
+        items:
+          pattern: '^pcie[0-9]+$'
+      - description:
+          Vendor-specific PHY names. Consider using the generic
+          names above for new bindings.
+        items:
+          oneOf:
+            - pattern: '^pcie(-?phy[0-9]*)?$'
+            - pattern: '^p2u-[0-7]$'
+
+  reset-gpio:
+    deprecated: true
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  max-link-speed:
+    maximum: 5
+
+  num-lanes:
+    description:
+      Number of PCIe link lanes to use. Can be omitted if the already brought
+      up link is supposed to be preserved.
+    maximum: 16
+
+  num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound address translation windows. This parameter can be
+      auto-detected based on the iATU memory writability. So there is no
+      point in having a dedicated DT-property for it.
+    maximum: 256
+
+  num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of inbound address translation windows. In the same way as
+      for the outbound AT windows, this parameter can be auto-detected based
+      on the iATU memory writability. There is no point having a dedicated
+      DT-property for it either.
+    maximum: 256
+
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound view ports configured in hardware. It's the same as
+      the number of outbound AT windows.
+    maximum: 256
+
+  snps,enable-cdm-check:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable automatic checking of CDM (Configuration Dependent Module)
+      registers for data corruption. CDM registers include standard PCIe
+      configuration space registers, Port Logic registers, DMA and iATU
+      registers. This feature has been available since DWC PCIe v4.80a.
+
+  dma-coherent: true
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
index b78535040f04..8fc2151691a4 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -13,76 +13,182 @@ maintainers:
 description: |
   Synopsys DesignWare PCIe host controller endpoint
 
+# Please create a separate DT-schema for your DWC PCIe Endpoint controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie-ep
+  required:
+    - compatible
+
 allOf:
   - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 properties:
-  compatible:
-    anyOf:
-      - {}
-      - const: snps,dw-pcie-ep
-
   reg:
-    description: |
-      It should contain Data Bus Interface (dbi) and config registers for all
-      versions.
-      For designware core version >= 4.80, it may contain ATU address space.
+    description:
+      DBI, DBI2 reg-spaces and outbound memory window are required for the
+      normal controller functioning. iATU memory IO region is also required
+      if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
-    maxItems: 4
+    maxItems: 5
 
   reg-names:
     minItems: 2
-    maxItems: 4
+    maxItems: 5
     items:
-      enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
-
-  reset-gpio:
-    description: GPIO pin number of PERST# signal
-    maxItems: 1
-    deprecated: true
-
-  reset-gpios:
-    description: GPIO controlled connection to PERST# signal
-    maxItems: 1
-
-  snps,enable-cdm-check:
-    type: boolean
-    description: |
-      This is a boolean property and if present enables
-      automatic checking of CDM (Configuration Dependent Module) registers
-      for data corruption. CDM registers include standard PCIe configuration
-      space registers, Port Logic registers, DMA and iATU (internal Address
-      Translation Unit) registers.
-
-  num-ib-windows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    maximum: 256
-    description: number of inbound address translation windows
-    deprecated: true
-
-  num-ob-windows:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    maximum: 256
-    description: number of outbound address translation windows
-    deprecated: true
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to
+            generate various application-specific traffic on the PCIe bus
+            hierarchy. It's usage scenario depends on the endpoint
+            functionality, for instance it can be used to create MSI(X)
+            messages.
+          const: addr_space
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ link, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: addr_space
+
+  interrupts:
+    description:
+      There is no mandatory IRQ signals for the normal controller functioning,
+      but in addition to the native set the platforms may have a link- or
+      PM-related IRQs specified.
+    minItems: 1
+    maxItems: 20
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 20
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
+
+  max-functions:
+    maximum: 32
 
 required:
+  - compatible
   - reg
   - reg-names
-  - compatible
 
 additionalProperties: true
 
 examples:
   - |
-    bus {
-      #address-cells = <1>;
-      #size-cells = <1>;
-      pcie-ep@dfd00000 {
-        compatible = "snps,dw-pcie-ep";
-        reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
-              <0xdfc01000 0x0001000>, /* IP registers 2 */
-              <0xd0000000 0x2000000>; /* Configuration space */
-        reg-names = "dbi", "dbi2", "addr_space";
-      };
+    pcie-ep@dfd00000 {
+      compatible = "snps,dw-pcie-ep";
+      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+            <0xdfc01000 0x0001000>, /* IP registers 2 */
+            <0xd0000000 0x2000000>; /* Configuration space */
+      reg-names = "dbi", "dbi2", "addr_space";
+
+      interrupts = <23>, <24>;
+      interrupt-names = "dma0", "dma1";
+
+      clocks = <&sys_clk 12>, <&sys_clk 24>;
+      clock-names = "dbi", "ref";
+
+      resets = <&sys_rst 12>, <&sys_rst 24>;
+      reset-names = "dbi", "phy";
+
+      phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
+      phy-names = "pcie0", "pcie1", "pcie2", "pcie3";
+
+      max-link-speed = <3>;
+      max-functions = /bits/ 8 <4>;
     };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 7287d395e1b6..c62c8fe517ae 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -13,20 +13,25 @@ maintainers:
 description: |
   Synopsys DesignWare PCIe host controller
 
+# Please create a separate DT-schema for your DWC PCIe Root Port controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie
+  required:
+    - compatible
+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 properties:
-  compatible:
-    anyOf:
-      - {}
-      - const: snps,dw-pcie
-
   reg:
-    description: |
-      It should contain Data Bus Interface (dbi) and config registers for all
-      versions.
-      For designware core version >= 4.80, it may contain ATU address space.
+    description:
+      At least DBI reg-space and peripheral devices CFG-space outbound window
+      are required for the normal controller work. iATU memory IO region is
+      also required if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
     maxItems: 5
 
@@ -34,71 +39,192 @@ properties:
     minItems: 2
     maxItems: 5
     items:
-      enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
-              parf, cfg, link, ulreg, smu, mpu, apb, phy ]
-
-  num-lanes:
-    description: |
-      number of lanes to use (this property should be specified unless
-      the link is brought already up in firmware)
-    maximum: 16
-
-  reset-gpio:
-    description: GPIO pin number of PERST# signal
-    maxItems: 1
-    deprecated: true
-
-  reset-gpios:
-    description: GPIO controlled connection to PERST# signal
-    maxItems: 1
-
-  interrupts: true
-
-  interrupt-names: true
-
-  clocks: true
-
-  snps,enable-cdm-check:
-    type: boolean
-    description: |
-      This is a boolean property and if present enables
-      automatic checking of CDM (Configuration Dependent Module) registers
-      for data corruption. CDM registers include standard PCIe configuration
-      space registers, Port Logic registers, DMA and iATU (internal Address
-      Translation Unit) registers.
-
-  num-viewport:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    maximum: 256
-    description: |
-      number of view ports configured in hardware. If a platform
-      does not specify it, the driver autodetects it.
-    deprecated: true
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to access
+            the peripheral PCIe devices configuration space.
+          const: config
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ apb, mgmt, link, ulreg, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+            - description: Syscon-related CSR regions.
+              enum: [ smu, mpu ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: config
+
+  interrupts:
+    description:
+      DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
+      signal is supposed to be specified for the host controller.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+            no more MSI interrupt pending. The interrupt is relevant to the
+            iMSI-RX - Integrated MSI Receiver (AXI bridge).
+          const: msi
+        - description:
+            Legacy A/B/C/D interrupt signal. Basically it's triggered by
+            receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+            from the downstream device.
+          pattern: "^int(a|b|c|d)$"
+        - description:
+            Error condition detected and a flag is set in the Root Error Status
+            register of the AER capability. It's asserted when the RC
+            internally generated an error or an error message is received by
+            the RC.
+          const: aer
+        - description:
+            PME message is received by the port. That means having the PME
+            status bit set in the Root Status register (the event is
+            supposed to be unmasked in the Root Control register).
+          const: pme
+        - description:
+            Hot-plug event is detected. That is a bit has been set in the
+            Slot Status register and the corresponding event is enabled in
+            the Slot Control register.
+          const: hp
+        - description:
+            Link Autonomous Bandwidth Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_au
+        - description:
+            Bandwidth Management Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_mg
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
+    allOf:
+      - contains:
+          const: msi
 
 additionalProperties: true
 
 required:
+  - compatible
   - reg
   - reg-names
-  - compatible
 
 examples:
   - |
-    bus {
-      #address-cells = <1>;
-      #size-cells = <1>;
-      pcie@dfc00000 {
-        device_type = "pci";
-        compatible = "snps,dw-pcie";
-        reg = <0xdfc00000 0x0001000>, /* IP registers */
-              <0xd0000000 0x0002000>; /* Configuration space */
-        reg-names = "dbi", "config";
-        #address-cells = <3>;
-        #size-cells = <2>;
-        ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
-                 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
-        interrupts = <25>, <24>;
-        #interrupt-cells = <1>;
-        num-lanes = <1>;
-      };
+    pcie@dfc00000 {
+      compatible = "snps,dw-pcie";
+      device_type = "pci";
+      reg = <0xdfc00000 0x0001000>, /* IP registers */
+            <0xd0000000 0x0002000>; /* Configuration space */
+      reg-names = "dbi", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+               <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <25>, <24>;
+      interrupt-names = "msi", "hp";
+      #interrupt-cells = <1>;
+
+      reset-gpios = <&port0 0 1>;
+
+      phys = <&pcie_phy>;
+      phy-names = "pcie";
+
+      num-lanes = <1>;
+      max-link-speed = <3>;
     };
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 48ed227fc5b9..53da2edd7c9a 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH