diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-12-05 11:43:31 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-12-05 11:43:31 -0800 |
commit | ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1 (patch) | |
tree | 1d39945dbdd233d35c571a726e135fe0ae845814 /Documentation/devicetree/bindings | |
parent | 38206c24ab09b4f4c2a57de5c1af0bb2e69cf5b6 (diff) | |
parent | 3f6939aec712a15152c32516c1c543a91ac1e717 (diff) | |
download | linux-stable-ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1.tar.gz linux-stable-ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1.tar.bz2 linux-stable-ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1.zip |
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Diffstat (limited to 'Documentation/devicetree/bindings')
15 files changed, 217 insertions, 153 deletions
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt deleted file mode 100644 index eaee06b2d8f2..000000000000 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt +++ /dev/null @@ -1,41 +0,0 @@ -== Introduction== - -LLCC (Last Level Cache Controller) provides last level of cache memory in SOC, -that can be shared by multiple clients. Clients here are different cores in the -SOC, the idea is to minimize the local caches at the clients and migrate to -common pool of memory. Cache memory is divided into partitions called slices -which are assigned to clients. Clients can query the slice details, activate -and deactivate them. - -Properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm845-llcc" - -- reg: - Usage: required - Value Type: <prop-encoded-array> - Definition: The first element specifies the llcc base start address and - the size of the register region. The second element specifies - the llcc broadcast base address and size of the register region. - -- reg-names: - Usage: required - Value Type: <stringlist> - Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base". - -- interrupts: - Usage: required - Definition: The interrupt is associated with the llcc edac device. - It's used for llcc cache single and double bit error detection - and reporting. - -Example: - - cache-controller@1100000 { - compatible = "qcom,sdm845-llcc"; - reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; - reg-names = "llcc_base", "llcc_broadcast_base"; - interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml new file mode 100644 index 000000000000..558749065b97 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/msm/qcom,llcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Last Level Cache Controller + +maintainers: + - Rishabh Bhatnagar <rishabhb@codeaurora.org> + - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> + +description: | + LLCC (Last Level Cache Controller) provides last level of cache memory in SoC, + that can be shared by multiple clients. Clients here are different cores in the + SoC, the idea is to minimize the local caches at the clients and migrate to + common pool of memory. Cache memory is divided into partitions called slices + which are assigned to clients. Clients can query the slice details, activate + and deactivate them. + +properties: + compatible: + enum: + - qcom,sc7180-llcc + - qcom,sdm845-llcc + + reg: + items: + - description: LLCC base register region + - description: LLCC broadcast base register region + + reg-names: + items: + - const: llcc_base + - const: llcc_broadcast_base + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt new file mode 100644 index 000000000000..fcd3456afbbe --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt @@ -0,0 +1,29 @@ +OMAP PRM instance bindings + +Power and Reset Manager is an IP block on OMAP family of devices which +handle the power domains and their current state, and provide reset +handling for the domains and/or separate IP blocks under the power domain +hierarchy. + +Required properties: +- compatible: Must contain one of the following: + "ti,am3-prm-inst" + "ti,am4-prm-inst" + "ti,omap4-prm-inst" + "ti,omap5-prm-inst" + "ti,dra7-prm-inst" + and additionally must contain: + "ti,omap-prm-inst" +- reg: Contains PRM instance register address range + (base address and length) + +Optional properties: +- #reset-cells: Should be 1 if the PRM instance in question supports resets. + +Example: + +prm_dsp2: prm@1b00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt index a4fe136be2ba..18c3aea90df2 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt @@ -11,7 +11,9 @@ power management service, FPGA service and other platform management services. Required properties: - - compatible: Must contain: "xlnx,zynqmp-firmware" + - compatible: Must contain any of below: + "xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC + "xlnx,versal-firmware" for Versal - method: The method of calling the PM-API firmware layer. Permitted values are: - "smc" : SMC #0, following the SMCCC @@ -21,6 +23,8 @@ Required properties: Example ------- +Zynq Ultrascale+ MPSoC +---------------------- firmware { zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; @@ -28,3 +32,13 @@ firmware { ... }; }; + +Versal +------ +firmware { + versal_firmware: versal-firmware { + compatible = "xlnx,versal-firmware"; + method = "smc"; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index 2e0723ab3384..f7b3ed74db54 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -4,6 +4,7 @@ Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" - clocks: phandle to the efuse peripheral clock provided by the clock controller. +- secure-monitor: phandle to the secure-monitor node = Data cells = Are child nodes of eFuse, bindings of which as described in @@ -16,6 +17,7 @@ Example: clocks = <&clkc CLKID_EFUSE>; #address-cells = <1>; #size-cells = <1>; + secure-monitor = <&sm>; sn: sn@14 { reg = <0x14 0x10>; @@ -30,6 +32,10 @@ Example: }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + = Data consumers = Are device nodes which consume nvmem data cells. diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt index eb35b22f9e23..bc75bf49cdae 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt @@ -5,6 +5,7 @@ which then translates it into a corresponding voltage on a rail Required Properties: - compatible: Should be one of the following + * qcom,msm8976-rpmpd: RPM Power domain for the msm8976 family of SoC * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC * qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC * qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt index 26e542eb96df..43e580ef64ba 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt @@ -4,7 +4,8 @@ The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Required properties: -- compatible: 'amlogic,meson-axg-audio-arb' +- compatible: 'amlogic,meson-axg-audio-arb' or + 'amlogic,meson-sm1-audio-arb' - reg: physical base address of the controller and length of memory mapped region. - clocks: phandle to the fifo peripheral clock provided by the audio diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index 00917d868d58..b3f57d81f007 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -16,6 +16,7 @@ properties: - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs + - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt deleted file mode 100644 index 510c748656ec..000000000000 --- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt +++ /dev/null @@ -1,52 +0,0 @@ -Qualcomm AOSS Reset Controller -====================================== - -This binding describes a reset-controller found on AOSS-CC (always on subsystem) -for Qualcomm SDM845 SoCs. - -Required properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,sdm845-aoss-cc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: must specify the base address and size of the register - space. - -- #reset-cells: - Usage: required - Value type: <uint> - Definition: must be 1; cell entry represents the reset index. - -Example: - -aoss_reset: reset-controller@c2a0000 { - compatible = "qcom,sdm845-aoss-cc"; - reg = <0xc2a0000 0x31000>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For list of all valid reset indicies see -<dt-bindings/reset/qcom,sdm845-aoss.h> - -Example: - -modem-pil@4080000 { - ... - - resets = <&aoss_reset AOSS_CC_MSS_RESTART>; - reset-names = "mss_restart"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml new file mode 100644 index 000000000000..e2d85a1e1d63 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm AOSS Reset Controller + +maintainers: + - Sibi Sankar <sibis@codeaurora.org> + +description: + The bindings describe the reset-controller found on AOSS-CC (always on + subsystem) for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-aoss-cc" + - const: "qcom,sdm845-aoss-cc" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-aoss-cc" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt deleted file mode 100644 index a62a492843e7..000000000000 --- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt +++ /dev/null @@ -1,52 +0,0 @@ -PDC Global -====================================== - -This binding describes a reset-controller found on PDC-Global (Power Domain -Controller) block for Qualcomm Technologies Inc SDM845 SoCs. - -Required properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,sdm845-pdc-global" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: must specify the base address and size of the register - space. - -- #reset-cells: - Usage: required - Value type: <uint> - Definition: must be 1; cell entry represents the reset index. - -Example: - -pdc_reset: reset-controller@b2e0000 { - compatible = "qcom,sdm845-pdc-global"; - reg = <0xb2e0000 0x20000>; - #reset-cells = <1>; -}; - -PDC reset clients -====================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For a list of all valid reset indices see -<dt-bindings/reset/qcom,sdm845-pdc.h> - -Example: - -modem-pil@4080000 { - ... - - resets = <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "pdc_reset"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml new file mode 100644 index 000000000000..d7d8cec9419f --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PDC Global + +maintainers: + - Sibi Sankar <sibis@codeaurora.org> + +description: + The bindings describes the reset-controller found on PDC-Global (Power Domain + Controller) block for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-pdc-global" + - const: "qcom,sdm845-pdc-global" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-pdc-global" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0xb2e0000 0x20000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index ea005177d20a..e320a8cc9e4d 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -130,6 +130,7 @@ this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3 "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 @@ -141,12 +142,12 @@ Required properties: - clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others - resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others Example: diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt index e284e4e1ccd5..5a33619d881d 100644 --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -5,7 +5,7 @@ and power management. Required properites: - reg : Offset and length of the register set of the RCPM block. - - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the fsl,rcpm-wakeup property. - compatible : Must contain a chip-specific RCPM block compatible string and (if applicable) may contain a chassis-version RCPM compatible @@ -20,6 +20,7 @@ Required properites: * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm All references to "1.0" and "2.0" refer to the QorIQ chassis version to which the chip complies. @@ -27,14 +28,19 @@ Chassis Version Example Chips --------------- ------------------------------- 1.0 p4080, p5020, p5040, p2041, p3041 2.0 t4240, b4860, b4420 -2.1 t1040, ls1021 +2.1 t1040, +2.1+ ls1021a, ls1012a, ls1043a, ls1046a + +Optional properties: + - little-endian : RCPM register block is Little Endian. Without it RCPM + will be Big Endian (default case). Example: The RCPM node for T4240: rcpm: global-utilities@e2000 { compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; reg = <0xe2000 0x1000>; - fsl,#rcpm-wakeup-cells = <2>; + #fsl,rcpm-wakeup-cells = <2>; }; * Freescale RCPM Wakeup Source Device Tree Bindings @@ -44,7 +50,7 @@ can be used as a wakeup source. - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR register cells. The number of IPPDEXPCR register cells is defined in - "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is + "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is the bit mask that should be set in IPPDEXPCR0, and the second register cell is for IPPDEXPCR1, and so on. diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt index f3fa313963d5..616fddcd09fd 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt @@ -22,6 +22,7 @@ resources. "qcom,rpm-apq8084" "qcom,rpm-msm8916" "qcom,rpm-msm8974" + "qcom,rpm-msm8976" "qcom,rpm-msm8998" "qcom,rpm-sdm660" "qcom,rpm-qcs404" |