Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "No core changes this time

  New drivers:

   - Tegra234 support

   - Qualcomm IPQ5018 support

   - Intel Meteor Lake-S support

   - Qualcomm SDX75 subdriver

   - Qualcomm SPMI-based PM8953 support

  Improvements:

   - Fix up support for GPIO3 on the AXP209

   - Push-pull drive configuration support for the AT91 PIO4

   - Fix misc non-urgent bugs in the AMD driver

   - Misc non-urgent improved error handling

   - Misc janitorial and minor improvements"

* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: cherryview: Drop goto label
  pinctrl: baytrail: invert if condition
  pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
  pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
  pinctrl: tegra: avoid duplicate field initializers
  dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
  pinctrl: mlxbf3: remove broken Kconfig 'select'
  pinctrl: spear: Remove unused of_gpio.h inclusion
  pinctrl: lantiq: Remove unused of_gpio.h inclusion
  pinctrl: at91-pio4: check return value of devm_kasprintf()
  pinctrl: microchip-sgpio: check return value of devm_kasprintf()
  pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
  pinctrl: intel: refine ->irq_set_type() hook
  pinctrl: intel: refine ->set_mux() hook
  pinctrl: baytrail: Use str_hi_lo() helper
  lib/string_choices: Add str_high_low() helper
  lib/string_helpers: Split out string_choices.h
  lib/string_helpers: Add missing header files to MAINTAINERS database
  pinctrl: npcm7xx: Add missing check for ioremap
  pinctrl:sunplus: Add check for kmalloc
  ...

12 files changed, 557 insertions, 43 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index e2b861ce16d8..774c3c269c40 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -37,7 +37,8 @@ right representation of the pin.
 Optional properties:
 - GENERIC_PINCONFIG: generic pinconfig options to use:
 	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
-	  input-schmitt-enable, input-debounce, output-low, output-high.
+	 drive-push-pull input-schmitt-enable, input-debounce, output-low,
+	 output-high.
 	- for microchip,sama7g5-pinctrl only:
 		- slew-rate: 0 - disabled, 1 - enabled (default)
 - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
new file mode 100644
index 000000000000..f3deda9f7127
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 AON Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra234-pinmux-aon
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2,
+                    can1_din_paa3, can0_stb_paa4, can0_en_paa5,
+                    soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0,
+                    can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3,
+                    spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+                    spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+                    uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+                    gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+                    sce_error_pee0, vcomp_alert_pee1,
+                    ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+                    soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7,
+                    hdmi_cec_pgg0,
+                    # drive groups
+                    drive_touch_clk_pcc4, drive_uart3_rx_pcc6,
+                    drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2,
+                    drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2,
+                    drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3,
+                    drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0,
+                    drive_spi2_miso_pcc1, drive_can1_dout_paa2,
+                    drive_can1_din_paa3, drive_can0_dout_paa0,
+                    drive_can0_din_paa1, drive_can0_stb_paa4,
+                    drive_can0_en_paa5, drive_soc_gpio49_paa6,
+                    drive_can0_err_paa7, drive_can1_stb_pbb0,
+                    drive_can1_en_pbb1, drive_soc_gpio50_pbb2,
+                    drive_can1_err_pbb3, drive_sce_error_pee0,
+                    drive_batt_oc_pee3, drive_bootv_ctl_n_pee7,
+                    drive_power_on_pee4, drive_soc_gpio26_pee5,
+                    drive_soc_gpio27_pee6, drive_ao_retention_n_pee2,
+                    drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@c300000 {
+      compatible = "nvidia,tegra234-pinmux-aon";
+      reg = <0xc300000 0x4000>;
+
+      pinctrl-names = "cec";
+      pinctrl-0 = <&cec_state>;
+
+      cec_state: pinmux-cec {
+        cec {
+          nvidia,pins = "hdmi_cec_pgg0";
+          nvidia,function = "gp";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
new file mode 100644
index 000000000000..4f9de78085e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  reg:
+    items:
+      - description: pinmux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      # We would typically use unevaluatedProperties here but that has the
+      # downside that all the properties in the common bindings become valid
+      # for all chip generations. In this case, however, we want the per-SoC
+      # bindings to be able to override which of the common properties are
+      # allowed, since not all pinmux generations support the same sets of
+      # properties. This way, the common bindings define the format of the
+      # properties but the per-SoC bindings define which of them apply to a
+      # given chip.
+      additionalProperties: false
+      properties:
+        nvidia,function:
+          enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+                  eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+                  pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+                  sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+                  usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+                  i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+                  dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+                  ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+                  displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+                  tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+
+        # out of the common properties, only these are allowed for Tegra234
+        nvidia,pins: true
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+
+      required:
+        - nvidia,pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
new file mode 100644
index 000000000000..17b865ecfcda
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra234-pinmux
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+                    dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+                    dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0,
+                    qspi0_sck_pc0, qspi0_cs_n_pc1,
+                    qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+                    qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+                    qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+                    qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+                    eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+                    eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+                    eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+                    eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+                    soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2,
+                    soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5,
+                    soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0,
+                    soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3,
+                    uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+                    soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1,
+                    soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+                    cpu_pwr_req_pi5, soc_gpio07_pi6,
+                    sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+                    sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+                    pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+                    pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+                    pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+                    pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+                    pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+                    pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0,
+                    dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+                    dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5,
+                    soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0,
+                    soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3,
+                    dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6,
+                    dp_aux_ch3_p_pn7, extperiph1_clk_pp0,
+                    extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+                    soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6,
+                    pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1,
+                    soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4,
+                    soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7,
+                    soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2,
+                    uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+                    soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0,
+                    cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4,
+                    uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+                    spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+                    spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+                    uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+                    usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+                    spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+                    spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2,
+                    spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5,
+                    soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0,
+                    soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3,
+                    ufs0_ref_clk_pae0, ufs0_rst_n_pae1,
+                    pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1,
+                    pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3,
+                    pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1,
+                    pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3,
+                    pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5,
+                    pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7,
+                    sdmmc1_comp, eqos_comp, qspi_comp,
+                    # drive groups
+                    drive_soc_gpio08_pb0, drive_soc_gpio36_pm5,
+                    drive_soc_gpio53_pm6, drive_soc_gpio55_pm4,
+                    drive_soc_gpio38_pm7, drive_soc_gpio39_pn1,
+                    drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0,
+                    drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2,
+                    drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3,
+                    drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5,
+                    drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7,
+                    drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4,
+                    drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+                    drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+                    drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+                    drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+                    drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+                    drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0,
+                    drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2,
+                    drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6,
+                    drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0,
+                    drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2,
+                    drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4,
+                    drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0,
+                    drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+                    drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+                    drive_sdmmc1_dat0_pj2 ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@2430000 {
+        compatible = "nvidia,tegra234-pinmux";
+        reg = <0x2430000 0x17000>;
+
+        pinctrl-names = "pex_rst";
+        pinctrl-0 = <&pex_rst_c5_out_state>;
+
+        pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+            pexrst {
+                nvidia,pins = "pex_l5_rst_n_paf1";
+                nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
new file mode 100644
index 000000000000..fad0118fd521
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5018 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq5018-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 24
+
+  gpio-line-names:
+    maxItems: 47
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq5018-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
+        minItems: 1
+        maxItems: 8
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
+                audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
+                audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
+                blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+                blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+                blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
+                cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
+                gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
+                pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
+                prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
+                qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
+                wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq5018-tlmm";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 47>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio33";
+                function = "blsp1_uart1";
+                bias-pull-down;
+            };
+
+            tx-pins {
+                pins = "gpio34";
+                function = "blsp1_uart1";
+                bias-pull-down;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
index 673713debac2..e5e9962b2174 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -86,19 +87,9 @@ $defs:
                 rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
                 wci20, wci21, wsa_swrm ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index eaadd5a9a445..8aaf50181cef 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -49,6 +49,7 @@ properties:
           - qcom,pm8921-gpio
           - qcom,pm8941-gpio
           - qcom,pm8950-gpio
+          - qcom,pm8953-gpio
           - qcom,pm8994-gpio
           - qcom,pm8998-gpio
           - qcom,pma8084-gpio
@@ -175,6 +176,7 @@ allOf:
               - qcom,pm8350b-gpio
               - qcom,pm8550ve-gpio
               - qcom,pm8950-gpio
+              - qcom,pm8953-gpio
               - qcom,pmi632-gpio
     then:
       properties:
@@ -434,6 +436,7 @@ $defs:
                  - gpio1-gpio44 for pm8921
                  - gpio1-gpio36 for pm8941
                  - gpio1-gpio8 for pm8950 (hole on gpio3)
+                 - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6)
                  - gpio1-gpio22 for pm8994
                  - gpio1-gpio26 for pm8998
                  - gpio1-gpio22 for pma8084
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
index 032763649336..c323f6d495a4 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -45,6 +45,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,19 +82,9 @@ $defs:
                 uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
                 vsense_trigger, wlan1_adc0, wlan1_adc1 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 4ae39fc7894a..4bd6d7977d3e 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -55,6 +55,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -104,20 +105,9 @@ $defs:
                 usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
                 vsense_trigger ]
 
-      bias-bus-hold: true
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 2ef793ae4038..27319782d94b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -85,7 +85,7 @@ $defs:
                 qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
                 dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
                 dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
-                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq,
                 dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
                 sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
                 qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
new file mode 100644
index 000000000000..7cb96aa75b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX75 TLMM block
+
+maintainers:
+  - Rohit Agarwal <quic_rohiagar@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdx75-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 67
+
+  gpio-line-names:
+    maxItems: 133
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx75-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx75-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx75-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2,
+                coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist,
+                ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg,
+                emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc,
+                eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk,
+                gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist,
+                ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens,
+                native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e,
+                pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync,
+                pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+                qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss,
+                qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira,
+                qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3,
+                qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc,
+                rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb,
+                sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n,
+                spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                usb2phy_ac_en, vsense_trigger_mirnat]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx75-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 133>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio12";
+                function = "qup_se1_l2_mira";
+                bias-disable;
+            };
+
+            tx-pins {
+                pins = "gpio13";
+                function = "qup_se1_l3_mira";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
index a57d44efe5bd..ede0f3acad9c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -62,6 +62,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -102,19 +103,9 @@ $defs:
                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
                 wsa_data ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg