diff options
author | Grant Likely <grant.likely@secretlab.ca> | 2009-01-30 08:23:33 -0700 |
---|---|---|
committer | Grant Likely <grant.likely@secretlab.ca> | 2009-01-30 08:23:33 -0700 |
commit | 34df9f69a4e298e2e8b939d8a7cc0d55846ba544 (patch) | |
tree | 7876d218dae2f8520c033f6aa63b07c0694fa728 /Documentation/powerpc | |
parent | e489a44e2473981474fe17f17418828ba341661a (diff) | |
download | linux-stable-34df9f69a4e298e2e8b939d8a7cc0d55846ba544.tar.gz linux-stable-34df9f69a4e298e2e8b939d8a7cc0d55846ba544.tar.bz2 linux-stable-34df9f69a4e298e2e8b939d8a7cc0d55846ba544.zip |
powerpc/5200: update device tree binding documentation
This patch updates the mpc5200 binding documentation to match
actual usage conventions, to remove incorrect information, and
to remove topics which are more thoroughly described elsewhere.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Diffstat (limited to 'Documentation/powerpc')
-rw-r--r-- | Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | 180 | ||||
-rw-r--r-- | Documentation/powerpc/mpc52xx-device-tree-bindings.txt | 277 |
2 files changed, 180 insertions, 277 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt new file mode 100644 index 000000000000..8447fd7090d0 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt @@ -0,0 +1,180 @@ +MPC5200 Device Tree Bindings +---------------------------- + +(c) 2006-2009 Secret Lab Technologies Ltd +Grant Likely <grant.likely@secretlab.ca> + +Naming conventions +------------------ +For mpc5200 on-chip devices, the format for each compatible value is +<chip>-<device>[-<mode>]. The OS should be able to match a device driver +to the device based solely on the compatible value. If two drivers +match on the compatible list; the 'most compatible' driver should be +selected. + +The split between the MPC5200 and the MPC5200B leaves a bit of a +conundrum. How should the compatible property be set up to provide +maximum compatibility information; but still accurately describe the +chip? For the MPC5200; the answer is easy. Most of the SoC devices +originally appeared on the MPC5200. Since they didn't exist anywhere +else; the 5200 compatible properties will contain only one item; +"fsl,mpc5200-<device>". + +The 5200B is almost the same as the 5200, but not quite. It fixes +silicon bugs and it adds a small number of enhancements. Most of the +devices either provide exactly the same interface as on the 5200. A few +devices have extra functions but still have a backwards compatible mode. +To express this information as completely as possible, 5200B device trees +should have two items in the compatible list: + compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>"; + +It is *strongly* recommended that 5200B device trees follow this convention +(instead of only listing the base mpc5200 item). + +ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec"; + ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec"; + +Modal devices, like PSCs, also append the configured function to the +end of the compatible field. ie. A PSC in i2s mode would specify +"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to +avoid naming conflicts with non-psc devices providing the same +function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe +the mpc5200 simple spi device and a PSC spi mode respectively. + +At the time of writing, exact chip may be either 'fsl,mpc5200' or +'fsl,mpc5200b'. + +The soc node +------------ +This node describes the on chip SOC peripherals. Every mpc5200 based +board will have this node, and as such there is a common naming +convention for SOC devices. + +Required properties: +name description +---- ----------- +ranges Memory range of the internal memory mapped registers. + Should be <0 [baseaddr] 0xc000> +reg Should be <[baseaddr] 0x100> +compatible mpc5200: "fsl,mpc5200-immr" + mpc5200b: "fsl,mpc5200b-immr" +system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI + clocks are derived from the fsystem clock. +bus-frequency IPB bus frequency in Hz. Clock rate + used by most of the soc devices. + +soc child nodes +--------------- +Any on chip SOC devices available to Linux must appear as soc5200 child nodes. + +Note: The tables below show the value for the mpc5200. A mpc5200b device +tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form. + +Required soc5200 child nodes: +name compatible Description +---- ---------- ----------- +cdm@<addr> fsl,mpc5200-cdm Clock Distribution +interrupt-controller@<addr> fsl,mpc5200-pic need an interrupt + controller to boot +bestcomm@<addr> fsl,mpc5200-bestcomm Bestcomm DMA controller + +Recommended soc5200 child nodes; populate as needed for your board +name compatible Description +---- ---------- ----------- +timer@<addr> fsl,mpc5200-gpt General purpose timers +gpio@<addr> fsl,mpc5200-gpio MPC5200 simple gpio controller +gpio@<addr> fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller +rtc@<addr> fsl,mpc5200-rtc Real time clock +mscan@<addr> fsl,mpc5200-mscan CAN bus controller +pci@<addr> fsl,mpc5200-pci PCI bridge +serial@<addr> fsl,mpc5200-psc-uart PSC in serial mode +i2s@<addr> fsl,mpc5200-psc-i2s PSC in i2s mode +ac97@<addr> fsl,mpc5200-psc-ac97 PSC in ac97 mode +spi@<addr> fsl,mpc5200-psc-spi PSC in spi mode +irda@<addr> fsl,mpc5200-psc-irda PSC in IrDA mode +spi@<addr> fsl,mpc5200-spi MPC5200 spi device +ethernet@<addr> fsl,mpc5200-fec MPC5200 ethernet device +ata@<addr> fsl,mpc5200-ata IDE ATA interface +i2c@<addr> fsl,mpc5200-i2c I2C controller +usb@<addr> fsl,mpc5200-ohci,ohci-be USB controller +xlb@<addr> fsl,mpc5200-xlb XLB arbitrator + +fsl,mpc5200-gpt nodes +--------------------- +On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board +design supports the internal wdt, then the device node for GPT0 should +include the empty property 'fsl,has-wdt'. + +An mpc5200-gpt can be used as a single line GPIO controller. To do so, +add the following properties to the gpt node: + gpio-controller; + #gpio-cells = <2>; +When referencing the GPIO line from another node, the first cell must always +be zero and the second cell represents the gpio flags and described in the +gpio device tree binding. + +An mpc5200-gpt can be used as a single line edge sensitive interrupt +controller. To do so, add the following properties to the gpt node: + interrupt-controller; + #interrupt-cells = <1>; +When referencing the IRQ line from another node, the cell represents the +sense mode; 1 for edge rising, 2 for edge falling. + +fsl,mpc5200-psc nodes +--------------------- +The PSCs should include a cell-index which is the index of the PSC in +hardware. cell-index is used to determine which shared SoC registers to +use when setting up PSC clocking. cell-index number starts at '0'. ie: + PSC1 has 'cell-index = <0>' + PSC4 has 'cell-index = <3>' + +PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in +i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the +compatible field. + + +fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes +------------------------------------------------ +Each GPIO controller node should have the empty property gpio-controller and +#gpio-cells set to 2. First cell is the GPIO number which is interpreted +according to the bit numbers in the GPIO control registers. The second cell +is for flags which is currently unused. + +fsl,mpc5200-fec nodes +--------------------- +The FEC node can specify one of the following properties to configure +the MII link: +- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire + mode instead of MII +- current-speed - Specifies that the MII should be configured for a fixed + speed. This property should contain two cells. The + first cell specifies the speed in Mbps and the second + should be '0' for half duplex and '1' for full duplex +- phy-handle - Contains a phandle to an Ethernet PHY. + +Interrupt controller (fsl,mpc5200-pic) node +------------------------------------------- +The mpc5200 pic binding splits hardware IRQ numbers into two levels. The +split reflects the layout of the PIC hardware itself, which groups +interrupts into one of three groups; CRIT, MAIN or PERP. Also, the +Bestcomm dma engine has it's own set of interrupt sources which are +cascaded off of peripheral interrupt 0, which the driver interprets as a +fourth group, SDMA. + +The interrupts property for device nodes using the mpc5200 pic consists +of three cells; <L1 L2 level> + + L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] + L2 := interrupt number; directly mapped from the value in the + "ICTL PerStat, MainStat, CritStat Encoded Register" + level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] + +For external IRQs, use the following interrupt property values (how to +specify external interrupts is a frequently asked question): +External interrupts: + external irq0: interrupts = <0 0 n>; + external irq1: interrupts = <1 1 n>; + external irq2: interrupts = <1 2 n>; + external irq3: interrupts = <1 3 n>; +'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low) + diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt deleted file mode 100644 index 6f12f1c79c0c..000000000000 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ /dev/null @@ -1,277 +0,0 @@ -MPC5200 Device Tree Bindings ----------------------------- - -(c) 2006-2007 Secret Lab Technologies Ltd -Grant Likely <grant.likely at secretlab.ca> - -********** DRAFT *********** -* WARNING: Do not depend on the stability of these bindings just yet. -* The MPC5200 device tree conventions are still in flux -* Keep an eye on the linuxppc-dev mailing list for more details -********** DRAFT *********** - -I - Introduction -================ -Boards supported by the arch/powerpc architecture require device tree be -passed by the boot loader to the kernel at boot time. The device tree -describes what devices are present on the board and how they are -connected. The device tree can either be passed as a binary blob (as -described in Documentation/powerpc/booting-without-of.txt), or passed -by Open Firmware (IEEE 1275) compatible firmware using an OF compatible -client interface API. - -This document specifies the requirements on the device-tree for mpc5200 -based boards. These requirements are above and beyond the details -specified in either the Open Firmware spec or booting-without-of.txt - -All new mpc5200-based boards are expected to match this document. In -cases where this document is not sufficient to support a new board port, -this document should be updated as part of adding the new board support. - -II - Philosophy -=============== -The core of this document is naming convention. The whole point of -defining this convention is to reduce or eliminate the number of -special cases required to support a 5200 board. If all 5200 boards -follow the same convention, then generic 5200 support code will work -rather than coding special cases for each new board. - -This section tries to capture the thought process behind why the naming -convention is what it is. - -1. names ---------- -There is strong convention/requirements already established for children -of the root node. 'cpus' describes the processor cores, 'memory' -describes memory, and 'chosen' provides boot configuration. Other nodes -are added to describe devices attached to the processor local bus. - -Following convention already established with other system-on-chip -processors, 5200 device trees should use the name 'soc5200' for the -parent node of on chip devices, and the root node should be its parent. - -Child nodes are typically named after the configured function. ie. -the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'. - -2. device_type property ------------------------ -similar to the node name convention above; the device_type reflects the -configured function of a device. ie. 'serial' for a uart and 'spi' for -an spi controller. However, while node names *should* reflect the -configured function, device_type *must* match the configured function -exactly. - -3. compatible property ----------------------- -Since device_type isn't enough to match devices to drivers, there also -needs to be a naming convention for the compatible property. Compatible -is an list of device descriptions sorted from specific to generic. For -the mpc5200, the required format for each compatible value is -<chip>-<device>[-<mode>]. The OS should be able to match a device driver -to the device based solely on the compatible value. If two drivers -match on the compatible list; the 'most compatible' driver should be -selected. - -The split between the MPC5200 and the MPC5200B leaves a bit of a -conundrum. How should the compatible property be set up to provide -maximum compatibility information; but still accurately describe the -chip? For the MPC5200; the answer is easy. Most of the SoC devices -originally appeared on the MPC5200. Since they didn't exist anywhere -else; the 5200 compatible properties will contain only one item; -"mpc5200-<device>". - -The 5200B is almost the same as the 5200, but not quite. It fixes -silicon bugs and it adds a small number of enhancements. Most of the -devices either provide exactly the same interface as on the 5200. A few -devices have extra functions but still have a backwards compatible mode. -To express this information as completely as possible, 5200B device trees -should have two items in the compatible list; -"mpc5200b-<device>\0mpc5200-<device>". It is *strongly* recommended -that 5200B device trees follow this convention (instead of only listing -the base mpc5200 item). - -If another chip appear on the market with one of the mpc5200 SoC -devices, then the compatible list should include mpc5200-<device>. - -ie. ethernet on mpc5200: compatible = "mpc5200-ethernet" - ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet" - -Modal devices, like PSCs, also append the configured function to the -end of the compatible field. ie. A PSC in i2s mode would specify -"mpc5200-psc-i2s", not "mpc5200-i2s". This convention is chosen to -avoid naming conflicts with non-psc devices providing the same -function. For example, "mpc5200-spi" and "mpc5200-psc-spi" describe -the mpc5200 simple spi device and a PSC spi mode respectively. - -If the soc device is more generic and present on other SOCs, the -compatible property can specify the more generic device type also. - -ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan"; - -At the time of writing, exact chip may be either 'mpc5200' or -'mpc5200b'. - -Device drivers should always try to match as generically as possible. - -III - Structure -=============== -The device tree for an mpc5200 board follows the structure defined in -booting-without-of.txt with the following additional notes: - -0) the root node ----------------- -Typical root description node; see booting-without-of - -1) The cpus node ----------------- -The cpus node follows the basic layout described in booting-without-of. -The bus-frequency property holds the XLB bus frequency -The clock-frequency property holds the core frequency - -2) The memory node ------------------- -Typical memory description node; see booting-without-of. - -3) The soc5200 node -------------------- -This node describes the on chip SOC peripherals. Every mpc5200 based -board will have this node, and as such there is a common naming -convention for SOC devices. - -Required properties: -name type description ----- ---- ----------- -device_type string must be "soc" -ranges int should be <0 baseaddr baseaddr+10000> -reg int must be <baseaddr 10000> -compatible string mpc5200: "mpc5200-soc" - mpc5200b: "mpc5200b-soc\0mpc5200-soc" -system-frequency int Fsystem frequency; source of all - other clocks. -bus-frequency int IPB bus frequency in HZ. Clock rate - used by most of the soc devices. -#interrupt-cells int must be <3>. - -Recommended properties: -name type description ----- ---- ----------- -model string Exact model of the chip; - ie: model="fsl,mpc5200" -revision string Silicon revision of chip - ie: revision="M08A" - -The 'model' and 'revision' properties are *strongly* recommended. Having -them presence acts as a bit of a safety net for working around as yet -undiscovered bugs on one version of silicon. For example, device drivers -can use the model and revision properties to decide if a bug fix should -be turned on. - -4) soc5200 child nodes ----------------------- -Any on chip SOC devices available to Linux must appear as soc5200 child nodes. - -Note: The tables below show the value for the mpc5200. A mpc5200b device -tree should use the "mpc5200b-<device>\0mpc5200-<device> form. - -Required soc5200 child nodes: -name device_type compatible Description ----- ----------- ---------- ----------- -cdm@<addr> cdm mpc5200-cmd Clock Distribution -pic@<addr> interrupt-controller mpc5200-pic need an interrupt - controller to boot -bestcomm@<addr> dma-controller mpc5200-bestcomm 5200 pic also requires - the bestcomm device - -Recommended soc5200 child nodes; populate as needed for your board -name device_type compatible Description ----- ----------- ---------- ----------- -gpt@<addr> gpt fsl,mpc5200-gpt General purpose timers -gpt@<addr> gpt fsl,mpc5200-gpt-gpio General purpose - timers in GPIO mode -gpio@<addr> fsl,mpc5200-gpio MPC5200 simple gpio - controller -gpio@<addr> fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio - controller -rtc@<addr> rtc mpc5200-rtc Real time clock -mscan@<addr> mscan mpc5200-mscan CAN bus controller -pci@<addr> pci mpc5200-pci PCI bridge -serial@<addr> serial mpc5200-psc-uart PSC in serial mode -i2s@<addr> sound mpc5200-psc-i2s PSC in i2s mode -ac97@<addr> sound mpc5200-psc-ac97 PSC in ac97 mode -spi@<addr> spi mpc5200-psc-spi PSC in spi mode -irda@<addr> irda mpc5200-psc-irda PSC in IrDA mode -spi@<addr> spi mpc5200-spi MPC5200 spi device -ethernet@<addr> network mpc5200-fec MPC5200 ethernet device -ata@<addr> ata mpc5200-ata IDE ATA interface -i2c@<addr> i2c mpc5200-i2c I2C controller -usb@<addr> usb-ohci-be mpc5200-ohci,ohci-be USB controller -xlb@<addr> xlb mpc5200-xlb XLB arbitrator - -Important child node properties -name type description ----- ---- ----------- -cell-index int When multiple devices are present, is the - index of the device in the hardware (ie. There - are 6 PSC on the 5200 numbered PSC1 to PSC6) - PSC1 has 'cell-index = <0>' - PSC4 has 'cell-index = <3>' - -5) General Purpose Timer nodes (child of soc5200 node) -On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board -design supports the internal wdt, then the device node for GPT0 should -include the empty property 'fsl,has-wdt'. - -6) PSC nodes (child of soc5200 node) -PSC nodes can define the optional 'port-number' property to force assignment -order of serial ports. For example, PSC5 might be physically connected to -the port labeled 'COM1' and PSC1 wired to 'COM1'. In this case, PSC5 would -have a "port-number = <0>" property, and PSC1 would have "port-number = <1>". - -PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in -i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the -compatible field. - -7) GPIO controller nodes -Each GPIO controller node should have the empty property gpio-controller and -#gpio-cells set to 2. First cell is the GPIO number which is interpreted -according to the bit numbers in the GPIO control registers. The second cell -is for flags which is currently unsused. - -8) FEC nodes -The FEC node can specify one of the following properties to configure -the MII link: -"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire - mode instead of MII -"current-speed" - Specifies that the MII should be configured for a fixed - speed. This property should contain two cells. The - first cell specifies the speed in Mbps and the second - should be '0' for half duplex and '1' for full duplex -"phy-handle" - Contains a phandle to an Ethernet PHY. - -IV - Extra Notes -================ - -1. Interrupt mapping --------------------- -The mpc5200 pic driver splits hardware IRQ numbers into two levels. The -split reflects the layout of the PIC hardware itself, which groups -interrupts into one of three groups; CRIT, MAIN or PERP. Also, the -Bestcomm dma engine has it's own set of interrupt sources which are -cascaded off of peripheral interrupt 0, which the driver interprets as a -fourth group, SDMA. - -The interrupts property for device nodes using the mpc5200 pic consists -of three cells; <L1 L2 level> - - L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] - L2 := interrupt number; directly mapped from the value in the - "ICTL PerStat, MainStat, CritStat Encoded Register" - level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] - -2. Shared registers -------------------- -Some SoC devices share registers between them. ie. the i2c devices use -a single clock control register, and almost all device are affected by -the port_config register. Devices which need to manipulate shared regs -should look to the parent SoC node. The soc node is responsible -for arbitrating all shared register access. |