dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.

This patch adds the dts bindings documenation for the Altera SOCFPGA glue
layer for the Synopsys STMMAC ethernet driver.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
v3: Remove stray empty line at end of socfpga_cyclone5_socdk.dts
v2: Use the dwmac-sti as an example for a glue layer and split patch up
to have dts as a separate patch. Also cc dts maintainers since there is
a new binding.

1 files changed, 35 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
new file mode 100644
index 000000000000..d53d3765b2c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -0,0 +1,35 @@
+Altera SOCFPGA SoC DWMAC controller
+
+The device node has following properties.
+
+Required properties:
+ - compatible	: Should contain "altr,socfpga-stmmac"
+ - altr,sysmgr-syscon : Should be the phandle to the system manager node that
+   encompasses the glue register, and the register offset.
+
+Sub-nodes:
+The dwmac core should be added as subnode to SOCFPGA dwmac glue.
+- dwmac :	The binding details of dwmac can be found in
+  Documentation/devicetree/bindings/net/stmmac.txt
+
+Example:
+
+ethernet0: ethernet0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "altr,socfpga-stmmac";
+	altr,sysmgr-syscon = <&sysmgr 0x60>;
+	status = "disabled";
+	ranges;
+
+	gmac0: gmac0@ff700000 {
+		compatible = "snps,dwmac-3.70a", "snps,dwmac";
+		reg = <0xff700000 0x2000>;
+		interrupts = <0 115 4>;
+		interrupt-names = "macirq";
+		mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+		clocks = <&emac0_clk>;
+		clock-names = "stmmaceth";
+	};
+};