ASoC: dt-bindings: audio-graph-port related update

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Audio-Graph-Card and Simple-Audio-Card are similar Card
and are sharing same utils. Thus we can also sharing same schema.

This patch-set fixup some Renesas's "make dtbs_check".

6 files changed, 184 insertions, 86 deletions

diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/ak4613.yaml
index 010574645e6a..75e13414d6eb 100644
--- a/Documentation/devicetree/bindings/sound/ak4613.yaml
+++ b/Documentation/devicetree/bindings/sound/ak4613.yaml
@@ -25,6 +25,13 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  ports:
+    $ref: audio-graph-port.yaml#/definitions/ports
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
 patternProperties:
   "^asahi-kasei,in[1-2]-single-end$":
     description: Input Pin 1 - 2.
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index f5b8b6d13077..6b4e02a0695a 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -11,32 +11,24 @@ maintainers:
 
 select: false
 
-allOf:
-  - $ref: /schemas/graph.yaml#/$defs/port-base
-
-properties:
-  prefix:
-    description: "device name prefix"
-    $ref: /schemas/types.yaml#/definitions/string
-  convert-rate:
-    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
-  convert-channels:
-    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
-  convert-sample-format:
-    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+definitions:
+  port-base:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    properties:
+      convert-rate:
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
+      convert-channels:
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
+      convert-sample-format:
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+      mclk-fs:
+        $ref: "simple-card.yaml#/definitions/mclk-fs"
 
-patternProperties:
-  "^endpoint(@[0-9a-f]+)?":
+  endpoint-base:
     $ref: /schemas/graph.yaml#/$defs/endpoint-base
-    unevaluatedProperties: false
-
     properties:
       mclk-fs:
-        description: |
-          Multiplication factor between stream rate and codec mclk.
-          When defined, mclk-fs property defined in dai-link sub nodes are
-          ignored.
-        $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: "simple-card.yaml#/definitions/mclk-fs"
       frame-inversion:
         description: dai-link uses frame clock inversion
         $ref: /schemas/types.yaml#/definitions/flag
@@ -53,6 +45,15 @@ patternProperties:
         oneOf:
           - $ref: /schemas/types.yaml#/definitions/flag
           - $ref: /schemas/types.yaml#/definitions/phandle
+      clocks:
+        description: Indicates system clock
+        $ref: /schemas/types.yaml#/definitions/phandle
+      system-clock-frequency:
+        $ref: "simple-card.yaml#/definitions/system-clock-frequency"
+      system-clock-direction-out:
+        $ref: "simple-card.yaml#/definitions/system-clock-direction-out"
+      system-clock-fixed:
+        $ref: "simple-card.yaml#/definitions/system-clock-fixed"
 
       dai-format:
         description: audio format.
@@ -100,4 +101,24 @@ patternProperties:
               minimum: 1
               maximum: 64
 
+  ports:
+    $ref: "#/definitions/port-base"
+    unevaluatedProperties: false
+    patternProperties:
+      "^port(@[0-9a-f]+)?$":
+        $ref: "#/definitions/port-base"
+        unevaluatedProperties: false
+        patternProperties:
+          "^endpoint(@[0-9a-f]+)?":
+            $ref: "#/definitions/endpoint-base"
+            unevaluatedProperties: false
+
+allOf:
+  - $ref: "#/definitions/port-base"
+
+patternProperties:
+  "^endpoint(@[0-9a-f]+)?":
+    $ref: "#/definitions/endpoint-base"
+    unevaluatedProperties: false
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index b1f08d6af38d..66175aeba7a7 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -64,6 +64,7 @@ properties:
     description: |
       it must be 0 if your system is using single DAI
       it must be 1 if your system is using multi  DAIs
+      This is used on simple-audio-card
     enum: [0, 1]
 
   "#clock-cells":
@@ -109,15 +110,34 @@ properties:
         - pattern: '^clk_(a|b|c|i)$'
 
   ports:
-    $ref: /schemas/graph.yaml#/properties/ports
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
     patternProperties:
       '^port(@[0-9a-f]+)?$':
-        $ref: audio-graph-port.yaml#
+        $ref: audio-graph-port.yaml#/definitions/port-base
         unevaluatedProperties: false
+        patternProperties:
+          "^endpoint(@[0-9a-f]+)?":
+            $ref: audio-graph-port.yaml#/definitions/endpoint-base
+            properties:
+              playback:
+                $ref: /schemas/types.yaml#/definitions/phandle-array
+              capture:
+                $ref: /schemas/types.yaml#/definitions/phandle-array
+            unevaluatedProperties: false
 
   port:
-    $ref: audio-graph-port.yaml#
+    $ref: audio-graph-port.yaml#/definitions/port-base
     unevaluatedProperties: false
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: audio-graph-port.yaml#/definitions/endpoint-base
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        unevaluatedProperties: false
 
   rcar_sound,dvc:
     description: DVC subnode.
@@ -174,10 +194,6 @@ properties:
                   enum:
                     - tx
                     - rx
-        required:
-          - interrupts
-          - dmas
-          - dma-names
     additionalProperties: false
 
   rcar_sound,ssiu:
@@ -267,7 +283,6 @@ required:
   - reg-names
   - clocks
   - clock-names
-  - "#sound-dai-cells"
 
 allOf:
   - $ref: dai-common.yaml#
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
index cec68d42ee28..f0d81bfe2598 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -217,6 +217,10 @@ patternProperties:
       reg:
         maxItems: 1
 
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
       # common properties
       frame-master:
         $ref: "#/definitions/frame-master"
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt
deleted file mode 100644
index a02ecaab5183..000000000000
--- a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Texas Instruments pcm3168a DT bindings
-
-This driver supports both SPI and I2C bus access for this codec
-
-Required properties:
-
-  - compatible: "ti,pcm3168a"
-
-  - clocks : Contains an entry for each entry in clock-names
-
-  - clock-names : Includes the following entries:
-	"scki"	The system clock
-
-  - VDD1-supply : Digital power supply regulator 1 (+3.3V)
-
-  - VDD2-supply : Digital power supply regulator 2 (+3.3V)
-
-  - VCCAD1-supply : ADC power supply regulator 1 (+5V)
-
-  - VCCAD2-supply : ADC power supply regulator 2 (+5V)
-
-  - VCCDA1-supply : DAC power supply regulator 1 (+5V)
-
-  - VCCDA2-supply : DAC power supply regulator 2 (+5V)
-
-For required properties on SPI/I2C, consult SPI/I2C device tree documentation
-
-Optional properties:
-
-  - reset-gpios : Optional reset gpio line connected to RST pin of the codec.
-		  The RST line is low active:
-		  RST = low: device power-down
-		  RST = high: device is enabled
-
-Examples:
-
-i2c0: i2c0@0 {
-
-	...
-
-	pcm3168a: audio-codec@44 {
-		compatible = "ti,pcm3168a";
-		reg = <0x44>;
-		reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_core CLK_AUDIO>;
-		clock-names = "scki";
-		VDD1-supply = <&supply3v3>;
-		VDD2-supply = <&supply3v3>;
-		VCCAD1-supply = <&supply5v0>;
-		VCCAD2-supply = <&supply5v0>;
-		VCCDA1-supply = <&supply5v0>;
-		VCCDA2-supply = <&supply5v0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dac_clk_pin>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml b/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml
new file mode 100644
index 000000000000..b6a4360ab845
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm3168a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PCM3168A Audio Codec
+
+maintainers:
+  - Damien Horsley <Damien.Horsley@imgtec.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description:
+  The Texas Instruments PCM3168A is a 24-bit Multi-channel Audio CODEC with
+  96/192kHz sampling rate, supporting both SPI and I2C bus access.
+
+properties:
+  compatible:
+    const: ti,pcm3168a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: System clock input
+
+  clock-names:
+    items:
+      - const: scki
+
+  reset-gpios:
+    items:
+      - description: |
+          GPIO line connected to the active-low RST pin of the codec.
+            RST = low: device power-down
+            RST = high: device is enabled
+
+  "#sound-dai-cells":
+    enum: [0, 1]
+
+  VDD1-supply:
+    description: Digital power supply regulator 1 (+3.3V)
+
+  VDD2-supply:
+    description: Digital power supply regulator 2 (+3.3V)
+
+  VCCAD1-supply:
+    description: ADC power supply regulator 1 (+5V)
+
+  VCCAD2-supply:
+    description: ADC power supply regulator 2 (+5V)
+
+  VCCDA1-supply:
+    description: DAC power supply regulator 1 (+5V)
+
+  VCCDA2-supply:
+    description: DAC power supply regulator 2 (+5V)
+
+  ports:
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        description: Audio input port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        description: Audio output port.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VDD1-supply
+  - VDD2-supply
+  - VCCAD1-supply
+  - VCCAD2-supply
+  - VCCDA1-supply
+  - VCCDA2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcm3168a: audio-codec@44 {
+            compatible = "ti,pcm3168a";
+            reg = <0x44>;
+            reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+            clocks = <&clk_core 42>;
+            clock-names = "scki";
+            VDD1-supply = <&supply3v3>;
+            VDD2-supply = <&supply3v3>;
+            VCCAD1-supply = <&supply5v0>;
+            VCCAD2-supply = <&supply5v0>;
+            VCCDA1-supply = <&supply5v0>;
+            VCCDA2-supply = <&supply5v0>;
+        };
+    };