Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "It's been a relatively calm release cycle and we're actually removing
  more code than we're adding.

  Summary:

   - new driver for the Toshiba Visconti platform

   - rework of interrupt handling in gpio-tegra

   - updates for GPIO selftests: we're now using the character device to
     perform the subsystem checks

   - support for a new rcar variant + some code refactoring

   - refactoring of gpio-ep93xx

   - SPDX License identifier has been updated in the uapi header so that
     userspace programs bundling it can become fully REUSE-compliant

   - improvements to pwm handling in gpio-mvebu

   - support for interrupt handling and power management for gpio-xilinx
     as well as some code refactoring

   - support for a new chip variant in gpio-pca953x

   - removal of drivers: zte xs & intel-mid and removal of leftovers
     from intel-msic

   - impovements to intel drivers pulled from Andy Shevchenko

   - improvements to the gpio-aggregator virtual GPIO driver

   - and several minor tweaks and fixes to code and documentation all
     over the place"

* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
  gpio: pcf857x: Fix missing first interrupt
  gpio: ep93xx: refactor base IRQ number
  gpio: ep93xx: refactor ep93xx_gpio_add_bank
  gpio: ep93xx: Fix typo s/hierarchial/hierarchical
  gpio: ep93xx: drop to_irq binding
  gpio: ep93xx: Fix wrong irq numbers in port F
  gpio: uapi: use the preferred SPDX license identifier
  gpio: gpio-xilinx: Add check if width exceeds 32
  gpio: gpio-xilinx: Add support for suspend and resume
  gpio: gpio-xilinx: Add interrupt support
  gpio: gpio-xilinx: Reduce spinlock array to array
  gpio: gpio-xilinx: Simplify with dev_err_probe()
  gpio: msic: Drop driver from Makefile
  gpio: wcove: Split out to_ireg() helper and deduplicate the code
  gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
  gpio: wcove: Get rid of error prone casting in IRQ handler
  gpio: intel-mid: Remove driver for deprecated platform
  gpio: msic: Remove driver for deprecated platform
  gpio: aggregator: Remove trailing comma in terminator entries
  gpio: aggregator: Use compound literal from the header
  ...

8 files changed, 91 insertions, 31 deletions

diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
index e31511255d8e..052a967c1f28 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -80,6 +80,11 @@ Required properties:
 
 - offset: offset address inside the syscon block
 
+Optional properties:
+
+- marvell,pwm-offset: offset address of PWM duration control registers inside
+  the syscon block
+
 Example:
 ap_syscon: system-controller@6f4000 {
 	compatible = "syscon", "simple-mfd";
@@ -101,6 +106,9 @@ ap_syscon: system-controller@6f4000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-ranges = <&ap_pinctrl 0 0 19>;
+		marvell,pwm-offset = <0x10c0>;
+		#pwm-cells = <2>;
+		clocks = <&ap_clk 3>;
 	};
 };
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
index cd91d61eac31..696ea46227d1 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
@@ -7,6 +7,7 @@ Required Properties:
 			"ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
 			"ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
 			"ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
+			"ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs
 
 - reg: Physical base address of the controller and the size of memory mapped
        registers.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
index f5ee23c2df60..246bae53be8b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -32,6 +32,7 @@ properties:
       - maxim,max7327
       - nxp,pca6416
       - nxp,pca9505
+      - nxp,pca9506
       - nxp,pca9534
       - nxp,pca9535
       - nxp,pca9536
@@ -70,7 +71,7 @@ properties:
 
   gpio-line-names:
     minItems: 1
-    maxItems: 32
+    maxItems: 40
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index 5026662e4508..f2541739ee3b 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -48,6 +48,9 @@ properties:
               - renesas,gpio-r8a77995     # R-Car D3
           - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
 
+      - items:
+          - const: renesas,gpio-r8a779a0  # R-Car V3U
+
   reg:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
new file mode 100644
index 000000000000..9ad470e01953
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/toshiba,gpio-visconti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti ARM SoCs GPIO controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,gpio-tmpv7708
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    description:
+      interrupt mapping one per GPIO.
+    minItems: 16
+    maxItems: 16
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-ranges
+  - gpio-controller
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupt-parent
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+      soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gpio: gpio@28020000 {
+          compatible = "toshiba,gpio-tmpv7708";
+          reg = <0 0x28020000 0 0x1000>;
+          #gpio-cells = <0x2>;
+          gpio-ranges = <&pmux 0 0 32>;
+          gpio-controller;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupt-parent = <&gic>;
+        };
+      };
+...
diff --git a/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt b/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
deleted file mode 100644
index 0dab156fcf41..000000000000
--- a/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ZTE ZX296702 GPIO controller
-
-Required properties:
-- compatible : "zte,zx296702-gpio"
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- gpio-controller : Marks the device node as a GPIO controller.
-- interrupts : Interrupt mapping for GPIO IRQ.
-- gpio-ranges : Interaction with the PINCTRL subsystem.
-
-gpio1: gpio@b008040 {
-	compatible = "zte,zx296702-gpio";
-	reg = <0xb008040 0x40>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-ranges = < &pmx0 0 54 2 &pmx0 2 59 14>;
-	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-parent = <&intc>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	clock-names = "gpio_pclk";
-	clocks = <&lsp0clk ZX296702_GPIO_CLK>;
-};
diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index 173e4c7b037d..22271c342d92 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -361,12 +361,13 @@ corresponding chip driver. In that case a significantly improved performance
 can be expected. If simultaneous access is not possible the GPIOs will be
 accessed sequentially.
 
-The functions take three arguments:
+The functions take four arguments:
+
 	* array_size	- the number of array elements
 	* desc_array	- an array of GPIO descriptors
 	* array_info	- optional information obtained from gpiod_get_array()
 	* value_bitmap	- a bitmap to store the GPIOs' values (get) or
-			  a bitmap of values to assign to the GPIOs (set)
+          a bitmap of values to assign to the GPIOs (set)
 
 The descriptor array can be obtained using the gpiod_get_array() function
 or one of its variants. If the group of descriptors returned by that function
diff --git a/Documentation/driver-api/gpio/intro.rst b/Documentation/driver-api/gpio/intro.rst
index 74591489d0b5..94dd7185e76e 100644
--- a/Documentation/driver-api/gpio/intro.rst
+++ b/Documentation/driver-api/gpio/intro.rst
@@ -106,11 +106,11 @@ don't. When you need open drain signaling but your hardware doesn't directly
 support it, there's a common idiom you can use to emulate it with any GPIO pin
 that can be used as either an input or an output:
 
- LOW:	gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
-	the pullup.
+ **LOW**: ``gpiod_direction_output(gpio, 0)`` ... this drives the signal and
+ overrides the pullup.
 
- HIGH:	gpiod_direction_input(gpio) ... this turns off the output, so the pullup
-	(or some other device) controls the signal.
+ **HIGH**: ``gpiod_direction_input(gpio)`` ... this turns off the output, so
+ the pullup (or some other device) controls the signal.
 
 The same logic can be applied to emulate open source signaling, by driving the
 high signal and configuring the GPIO as input for low. This open drain/open