diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-04-30 04:58:51 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-04-30 04:58:51 -0700 |
commit | 890fa45d01eb89304ef26564cc310747f56b5438 (patch) | |
tree | b07a2fd166cb26b3ff0a8a4b275e77c296af4557 /Documentation | |
parent | a4a00f6b9dc0e3ea13145f53ce163821eb1a6fa0 (diff) | |
parent | 6da6c0db5316275015e8cc2959f12a17584aeb64 (diff) | |
download | linux-stable-890fa45d01eb89304ef26564cc310747f56b5438.tar.gz linux-stable-890fa45d01eb89304ef26564cc310747f56b5438.tar.bz2 linux-stable-890fa45d01eb89304ef26564cc310747f56b5438.zip |
Merge 4.17-rc3 into usb-next
This resolves the merge issue with drivers/usb/core/hcd.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation')
21 files changed, 155 insertions, 108 deletions
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index ff335f8aeb39..92f30006adae 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -136,6 +136,19 @@ Sorting .. kernel-doc:: lib/list_sort.c :export: +Text Searching +-------------- + +.. kernel-doc:: lib/textsearch.c + :doc: ts_intro + +.. kernel-doc:: lib/textsearch.c + :export: + +.. kernel-doc:: include/linux/textsearch.h + :functions: textsearch_find textsearch_next \ + textsearch_get_pattern textsearch_get_pattern_len + UUID/GUID --------- diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt index 8ff65fa632fd..c06c045126fc 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt @@ -21,7 +21,7 @@ Required properties: - interrupts : identifier to the device interrupt - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock names. -- clocks-names : +- clock-names : * "xtal" for external xtal clock identifier * "pclk" for the bus core clock, either the clk81 clock or the gate clock * "baud" for the source of the baudrate generator, can be either the xtal diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 2ae2fee7e023..b7e0e32b9ac6 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -24,7 +24,7 @@ Required properties: - Must contain two elements for the extended variant of the IP (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx", respectively the UART TX interrupt and the UART RX interrupt. A - corresponding interrupts-names property must be defined. + corresponding interrupt-names property must be defined. - For backward compatibility reasons, a single element interrupts property is also supported for the standard variant of the IP, containing only the UART sum interrupt. This form is deprecated diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index ad962f4ec3aa..a006ea4d065f 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -17,6 +17,8 @@ Required properties: - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. + - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. + - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 1b596fd38dc4..b957acff57aa 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -49,19 +49,6 @@ on the SoC (only first trip points defined in DT will be configured): - samsung,exynos5433-tmu: 8 - samsung,exynos7-tmu: 8 -Following properties are mandatory (depending on SoC): -- samsung,tmu_gain: Gain value for internal TMU operation. -- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage -- samsung,tmu_noise_cancel_mode: Mode for noise cancellation -- samsung,tmu_efuse_value: Default level of temperature - it is needed when - in factory fusing produced wrong value -- samsung,tmu_min_efuse_value: Minimum temperature fused value -- samsung,tmu_max_efuse_value: Maximum temperature fused value -- samsung,tmu_first_point_trim: First point trimming value -- samsung,tmu_second_point_trim: Second point trimming value -- samsung,tmu_default_temp_offset: Default temperature offset -- samsung,tmu_cal_type: Callibration type - ** Optional properties: - vtmu-supply: This entry is optional and provides the regulator node supplying @@ -78,7 +65,7 @@ Example 1): clocks = <&clock 383>; clock-names = "tmu_apbif"; vtmu-supply = <&tmu_regulator_node>; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 2): @@ -89,7 +76,7 @@ Example 2): interrupts = <0 58 0>; clocks = <&clock 21>; clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") @@ -99,7 +86,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 184 0>; clocks = <&clock 318>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -108,7 +95,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 185 0>; clocks = <&clock 318>, <&clock 319>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_gpu: tmu@100a0000 { @@ -117,7 +104,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 215 0>; clocks = <&clock 319>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Note: For multi-instance tmu each instance should have an alias correctly diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 1719d47a5e2f..cc553f0952c5 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -55,8 +55,7 @@ of heat dissipation). For example a fan's cooling states correspond to the different fan speeds possible. Cooling states are referred to by single unsigned integers, where larger numbers mean greater heat dissipation. The precise set of cooling states associated with a device -(as referred to by the cooling-min-level and cooling-max-level -properties) should be defined in a particular device's binding. +should be defined in a particular device's binding. For more examples of cooling devices, refer to the example sections below. Required properties: @@ -69,15 +68,6 @@ Required properties: See Cooling device maps section below for more details on how consumers refer to cooling devices. -Optional properties: -- cooling-min-level: An integer indicating the smallest - Type: unsigned cooling state accepted. Typically 0. - Size: one cell - -- cooling-max-level: An integer indicating the largest - Type: unsigned cooling state accepted. - Size: one cell - * Trip points The trip node is a node to describe a point in the temperature domain @@ -226,8 +216,6 @@ cpus { 396000 950000 198000 850000 >; - cooling-min-level = <0>; - cooling-max-level = <3>; #cooling-cells = <2>; /* min followed by max */ }; ... @@ -241,8 +229,6 @@ cpus { */ fan0: fan@48 { ... - cooling-min-level = <0>; - cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt new file mode 100644 index 000000000000..ea22dfe485be --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -0,0 +1,21 @@ +Nuvoton NPCM7xx timer + +Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit +timer counters. + +Required properties: +- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. +- reg : Offset and length of the register set for the device. +- interrupts : Contain the timer interrupt with flags for + falling edge. +- clocks : phandle of timer reference clock (usually a 25 MHz clock). + +Example: + +timer@f0008000 { + compatible = "nuvoton,npcm750-timer"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf0008000 0x50>; + clocks = <&clk NPCM7XX_CLK_TIMER>; +}; + diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt index b4aa7ddb5b13..f82087b220f4 100644 --- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt @@ -15,7 +15,7 @@ Required properties: - interrupts : Should be the clock event device interrupt. - clocks : The clocks provided by the SoC to drive the timer, must contain an entry for each entry in clock-names. -- clock-names : Must include the following entries: "igp" and "per". +- clock-names : Must include the following entries: "ipg" and "per". Example: tpm5: tpm@40260000 { diff --git a/Documentation/driver-api/firmware/request_firmware.rst b/Documentation/driver-api/firmware/request_firmware.rst index cf4516dfbf96..d5ec95a7195b 100644 --- a/Documentation/driver-api/firmware/request_firmware.rst +++ b/Documentation/driver-api/firmware/request_firmware.rst @@ -17,17 +17,17 @@ an error is returned. request_firmware ---------------- -.. kernel-doc:: drivers/base/firmware_class.c +.. kernel-doc:: drivers/base/firmware_loader/main.c :functions: request_firmware request_firmware_direct ----------------------- -.. kernel-doc:: drivers/base/firmware_class.c +.. kernel-doc:: drivers/base/firmware_loader/main.c :functions: request_firmware_direct request_firmware_into_buf ------------------------- -.. kernel-doc:: drivers/base/firmware_class.c +.. kernel-doc:: drivers/base/firmware_loader/main.c :functions: request_firmware_into_buf Asynchronous firmware requests @@ -41,7 +41,7 @@ in atomic contexts. request_firmware_nowait ----------------------- -.. kernel-doc:: drivers/base/firmware_class.c +.. kernel-doc:: drivers/base/firmware_loader/main.c :functions: request_firmware_nowait Special optimizations on reboot @@ -50,12 +50,12 @@ Special optimizations on reboot Some devices have an optimization in place to enable the firmware to be retained during system reboot. When such optimizations are used the driver author must ensure the firmware is still available on resume from suspend, -this can be done with firmware_request_cache() insted of requesting for the -firmare to be loaded. +this can be done with firmware_request_cache() instead of requesting for the +firmware to be loaded. firmware_request_cache() ------------------------ -.. kernel-doc:: drivers/base/firmware_class.c +------------------------ +.. kernel-doc:: drivers/base/firmware_loader/main.c :functions: firmware_request_cache request firmware API expected driver use diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst index 6d9ff316b608..bee1b9a1702f 100644 --- a/Documentation/driver-api/infrastructure.rst +++ b/Documentation/driver-api/infrastructure.rst @@ -28,7 +28,7 @@ Device Drivers Base .. kernel-doc:: drivers/base/node.c :internal: -.. kernel-doc:: drivers/base/firmware_class.c +.. kernel-doc:: drivers/base/firmware_loader/main.c :export: .. kernel-doc:: drivers/base/transport_class.c diff --git a/Documentation/driver-api/usb/typec.rst b/Documentation/driver-api/usb/typec.rst index feb31946490b..48ff58095f11 100644 --- a/Documentation/driver-api/usb/typec.rst +++ b/Documentation/driver-api/usb/typec.rst @@ -210,7 +210,7 @@ If the connector is dual-role capable, there may also be a switch for the data role. USB Type-C Connector Class does not supply separate API for them. The port drivers can use USB Role Class API with those. -Illustration of the muxes behind a connector that supports an alternate mode: +Illustration of the muxes behind a connector that supports an alternate mode:: ------------------------ | Connector | diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index d04e6e4964ee..fbed645ccd75 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -9,8 +9,8 @@ i2c adapters present on your system at a given time. i2cdetect is part of the i2c-tools package. I2C device files are character device files with major device number 89 -and a minor device number corresponding to the number assigned as -explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ..., +and a minor device number corresponding to the number assigned as +explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ..., i2c-10, ...). All 256 minor device numbers are reserved for i2c. @@ -23,11 +23,6 @@ First, you need to include these two headers: #include <linux/i2c-dev.h> #include <i2c/smbus.h> -(Please note that there are two files named "i2c-dev.h" out there. One is -distributed with the Linux kernel and the other one is included in the -source tree of i2c-tools. They used to be different in content but since 2012 -they're identical. You should use "linux/i2c-dev.h"). - Now, you have to decide which adapter you want to access. You should inspect /sys/class/i2c-dev/ or run "i2cdetect -l" to decide this. Adapter numbers are assigned somewhat dynamically, so you can not @@ -38,7 +33,7 @@ Next thing, open the device file, as follows: int file; int adapter_nr = 2; /* probably dynamically determined */ char filename[20]; - + snprintf(filename, 19, "/dev/i2c-%d", adapter_nr); file = open(filename, O_RDWR); if (file < 0) { @@ -72,8 +67,10 @@ the device supports them. Both are illustrated below. /* res contains the read word */ } - /* Using I2C Write, equivalent of - i2c_smbus_write_word_data(file, reg, 0x6543) */ + /* + * Using I2C Write, equivalent of + * i2c_smbus_write_word_data(file, reg, 0x6543) + */ buf[0] = reg; buf[1] = 0x43; buf[2] = 0x65; @@ -140,14 +137,14 @@ ioctl(file, I2C_RDWR, struct i2c_rdwr_ioctl_data *msgset) set in each message, overriding the values set with the above ioctl's. ioctl(file, I2C_SMBUS, struct i2c_smbus_ioctl_data *args) - Not meant to be called directly; instead, use the access functions - below. + If possible, use the provided i2c_smbus_* methods described below instead + of issuing direct ioctls. You can do plain i2c transactions by using read(2) and write(2) calls. You do not need to pass the address byte; instead, set it through ioctl I2C_SLAVE before you try to access the device. -You can do SMBus level transactions (see documentation file smbus-protocol +You can do SMBus level transactions (see documentation file smbus-protocol for details) through the following functions: __s32 i2c_smbus_write_quick(int file, __u8 value); __s32 i2c_smbus_read_byte(int file); @@ -158,7 +155,7 @@ for details) through the following functions: __s32 i2c_smbus_write_word_data(int file, __u8 command, __u16 value); __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value); __s32 i2c_smbus_read_block_data(int file, __u8 command, __u8 *values); - __s32 i2c_smbus_write_block_data(int file, __u8 command, __u8 length, + __s32 i2c_smbus_write_block_data(int file, __u8 command, __u8 length, __u8 *values); All these transactions return -1 on failure; you can read errno to see what happened. The 'write' transactions return 0 on success; the @@ -166,10 +163,9 @@ what happened. The 'write' transactions return 0 on success; the returns the number of values read. The block buffers need not be longer than 32 bytes. -The above functions are all inline functions, that resolve to calls to -the i2c_smbus_access function, that on its turn calls a specific ioctl -with the data in a specific format. Read the source code if you -want to know what happens behind the screens. +The above functions are made available by linking against the libi2c library, +which is provided by the i2c-tools project. See: +https://git.kernel.org/pub/scm/utils/i2c-tools/i2c-tools.git/. Implementation details diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 84bb74dcae12..7f7413e597f3 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -217,7 +217,6 @@ Code Seq#(hex) Include File Comments 'd' 02-40 pcmcia/ds.h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! -'e' 00-1F drivers/net/irda/irtty-sir.h conflict! 'f' 00-1F linux/ext2_fs.h conflict! 'f' 00-1F linux/ext3_fs.h conflict! 'f' 00-0F fs/jfs/jfs_dinode.h conflict! @@ -247,7 +246,6 @@ Code Seq#(hex) Include File Comments 'm' all linux/synclink.h conflict! 'm' 00-19 drivers/message/fusion/mptctl.h conflict! 'm' 00 drivers/scsi/megaraid/megaraid_ioctl.h conflict! -'m' 00-1F net/irda/irmod.h conflict! 'n' 00-7F linux/ncp_fs.h and fs/ncpfs/ioctl.c 'n' 80-8F uapi/linux/nilfs2_api.h NILFS2 'n' E0-FF linux/matroxfb.h matroxfb diff --git a/Documentation/livepatch/shadow-vars.txt b/Documentation/livepatch/shadow-vars.txt index 89c66634d600..ecc09a7be5dd 100644 --- a/Documentation/livepatch/shadow-vars.txt +++ b/Documentation/livepatch/shadow-vars.txt @@ -34,9 +34,13 @@ meta-data and shadow-data: - data[] - storage for shadow data It is important to note that the klp_shadow_alloc() and -klp_shadow_get_or_alloc() calls, described below, store a *copy* of the -data that the functions are provided. Callers should provide whatever -mutual exclusion is required of the shadow data. +klp_shadow_get_or_alloc() are zeroing the variable by default. +They also allow to call a custom constructor function when a non-zero +value is needed. Callers should provide whatever mutual exclusion +is required. + +Note that the constructor is called under klp_shadow_lock spinlock. It allows +to do actions that can be done only once when a new variable is allocated. * klp_shadow_get() - retrieve a shadow variable data pointer - search hashtable for <obj, id> pair @@ -47,7 +51,7 @@ mutual exclusion is required of the shadow data. - WARN and return NULL - if <obj, id> doesn't already exist - allocate a new shadow variable - - copy data into the new shadow variable + - initialize the variable using a custom constructor and data when provided - add <obj, id> to the global hashtable * klp_shadow_get_or_alloc() - get existing or alloc a new shadow variable @@ -56,16 +60,20 @@ mutual exclusion is required of the shadow data. - return existing shadow variable - if <obj, id> doesn't already exist - allocate a new shadow variable - - copy data into the new shadow variable + - initialize the variable using a custom constructor and data when provided - add <obj, id> pair to the global hashtable * klp_shadow_free() - detach and free a <obj, id> shadow variable - find and remove a <obj, id> reference from global hashtable - - if found, free shadow variable + - if found + - call destructor function if defined + - free shadow variable * klp_shadow_free_all() - detach and free all <*, id> shadow variables - find and remove any <*, id> references from global hashtable - - if found, free shadow variable + - if found + - call destructor function if defined + - free shadow variable 2. Use cases @@ -107,7 +115,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp); /* Attach a corresponding shadow variable, then initialize it */ - ps_lock = klp_shadow_alloc(sta, PS_LOCK, NULL, sizeof(*ps_lock), gfp); + ps_lock = klp_shadow_alloc(sta, PS_LOCK, sizeof(*ps_lock), gfp, + NULL, NULL); if (!ps_lock) goto shadow_fail; spin_lock_init(ps_lock); @@ -131,7 +140,7 @@ variable: void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) { - klp_shadow_free(sta, PS_LOCK); + klp_shadow_free(sta, PS_LOCK, NULL); kfree(sta); ... @@ -148,16 +157,24 @@ shadow variables to parents already in-flight. For commit 1d147bfa6429, a good spot to allocate a shadow spinlock is inside ieee80211_sta_ps_deliver_wakeup(): +int ps_lock_shadow_ctor(void *obj, void *shadow_data, void *ctor_data) +{ + spinlock_t *lock = shadow_data; + + spin_lock_init(lock); + return 0; +} + #define PS_LOCK 1 void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) { - DEFINE_SPINLOCK(ps_lock_fallback); spinlock_t *ps_lock; /* sync with ieee80211_tx_h_unicast_ps_buf */ ps_lock = klp_shadow_get_or_alloc(sta, PS_LOCK, - &ps_lock_fallback, sizeof(ps_lock_fallback), - GFP_ATOMIC); + sizeof(*ps_lock), GFP_ATOMIC, + ps_lock_shadow_ctor, NULL); + if (ps_lock) spin_lock(ps_lock); ... diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index a4508ec1816b..fd55c7de9991 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -169,7 +169,7 @@ access to BPF code as well. BPF engine and instruction set ------------------------------ -Under tools/net/ there's a small helper tool called bpf_asm which can +Under tools/bpf/ there's a small helper tool called bpf_asm which can be used to write low-level filters for example scenarios mentioned in the previous section. Asm-like syntax mentioned here has been implemented in bpf_asm and will be used for further explanations (instead of dealing with @@ -359,7 +359,7 @@ $ ./bpf_asm -c foo In particular, as usage with xt_bpf or cls_bpf can result in more complex BPF filters that might not be obvious at first, it's good to test filters before attaching to a live system. For that purpose, there's a small tool called -bpf_dbg under tools/net/ in the kernel source directory. This debugger allows +bpf_dbg under tools/bpf/ in the kernel source directory. This debugger allows for testing BPF filters against given pcap files, single stepping through the BPF code on the pcap's packets and to do BPF machine register dumps. @@ -483,7 +483,7 @@ Example output from dmesg: [ 3389.935851] JIT code: 00000030: 00 e8 28 94 ff e0 83 f8 01 75 07 b8 ff ff 00 00 [ 3389.935852] JIT code: 00000040: eb 02 31 c0 c9 c3 -In the kernel source tree under tools/net/, there's bpf_jit_disasm for +In the kernel source tree under tools/bpf/, there's bpf_jit_disasm for generating disassembly out of the kernel log's hexdump: # ./bpf_jit_disasm diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 5dc1a040a2f1..35ffaa281b26 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1390,26 +1390,26 @@ mld_qrv - INTEGER Default: 2 (as specified by RFC3810 9.1) Minimum: 1 (as specified by RFC6636 4.5) -max_dst_opts_cnt - INTEGER +max_dst_opts_number - INTEGER Maximum number of non-padding TLVs allowed in a Destination options extension header. If this value is less than zero then unknown options are disallowed and the number of known TLVs allowed is the absolute value of this number. Default: 8 -max_hbh_opts_cnt - INTEGER +max_hbh_opts_number - INTEGER Maximum number of non-padding TLVs allowed in a Hop-by-Hop options extension header. If this value is less than zero then unknown options are disallowed and the number of known TLVs allowed is the absolute value of this number. Default: 8 -max dst_opts_len - INTEGER +max_dst_opts_length - INTEGER Maximum length allowed for a Destination options extension header. Default: INT_MAX (unlimited) -max hbh_opts_len - INTEGER +max_hbh_length - INTEGER Maximum length allowed for a Hop-by-Hop options extension header. Default: INT_MAX (unlimited) @@ -2126,18 +2126,3 @@ max_dgram_qlen - INTEGER Default: 10 - -UNDOCUMENTED: - -/proc/sys/net/irda/* - fast_poll_increase FIXME - warn_noreply_time FIXME - discovery_slots FIXME - slot_timeout FIXME - max_baud_rate FIXME - discovery_timeout FIXME - lap_keepalive_time FIXME - max_noreply_time FIXME - max_tx_data_size FIXME - max_tx_window FIXME - min_tx_turn_time FIXME diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt index 31abd04b9572..6f55eb960a6d 100644 --- a/Documentation/power/suspend-and-cpuhotplug.txt +++ b/Documentation/power/suspend-and-cpuhotplug.txt @@ -168,7 +168,7 @@ update on the CPUs, as discussed below: [Please bear in mind that the kernel requests the microcode images from userspace, using the request_firmware() function defined in -drivers/base/firmware_class.c] +drivers/base/firmware_loader/main.c] a. When all the CPUs are identical: diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst index 00cecf1fcba9..633be1043690 100644 --- a/Documentation/process/magic-number.rst +++ b/Documentation/process/magic-number.rst @@ -157,8 +157,5 @@ memory management. See ``include/sound/sndmagic.h`` for complete list of them. M OSS sound drivers have their magic numbers constructed from the soundcard PCI ID - these are not listed here as well. -IrDA subsystem also uses large number of own magic numbers, see -``include/net/irda/irda.h`` for a complete list of them. - HFS is another larger user of magic numbers - you can find them in ``fs/hfs/hfs.h``. diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index e45f0786f3f9..67d9c38e95eb 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -461,9 +461,17 @@ of ftrace. Here is a list of some of the key files: and ticks at the same rate as the hardware clocksource. boot: - Same as mono. Used to be a separate clock which accounted - for the time spent in suspend while CLOCK_MONOTONIC did - not. + This is the boot clock (CLOCK_BOOTTIME) and is based on the + fast monotonic clock, but also accounts for time spent in + suspend. Since the clock access is designed for use in + tracing in the suspend path, some side effects are possible + if clock is accessed after the suspend time is accounted before + the fast mono clock is updated. In this case, the clock update + appears to happen slightly sooner than it normally would have. + Also on 32-bit systems, it's possible that the 64-bit boot offset + sees a partial update. These effects are rare and post + processing should be able to handle them. See comments in the + ktime_get_boot_fast_ns() function for more information. To set a clock, simply echo the clock name into this file:: diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 1c7958b57fe9..758bf403a169 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1960,6 +1960,9 @@ ARM 32-bit VFP control registers have the following id bit patterns: ARM 64-bit FP registers have the following id bit patterns: 0x4030 0000 0012 0 <regno:12> +ARM firmware pseudo-registers have the following bit pattern: + 0x4030 0000 0014 <regno:16> + arm64 registers are mapped using the lower 32 bits. The upper 16 of that is the register group type, or coprocessor number: @@ -1976,6 +1979,9 @@ arm64 CCSIDR registers are demultiplexed by CSSELR value: arm64 system registers have the following id bit patterns: 0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3> +arm64 firmware pseudo-registers have the following bit pattern: + 0x6030 0000 0014 <regno:16> + MIPS registers are mapped using the lower 32 bits. The upper 16 of that is the register group type: @@ -2510,7 +2516,8 @@ Possible features: and execute guest code when KVM_RUN is called. - KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode. Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only). - - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU. + - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 (or a future revision + backward compatible with v0.2) for the CPU. Depends on KVM_CAP_ARM_PSCI_0_2. - KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU. Depends on KVM_CAP_ARM_PMU_V3. diff --git a/Documentation/virtual/kvm/arm/psci.txt b/Documentation/virtual/kvm/arm/psci.txt new file mode 100644 index 000000000000..aafdab887b04 --- /dev/null +++ b/Documentation/virtual/kvm/arm/psci.txt @@ -0,0 +1,30 @@ +KVM implements the PSCI (Power State Coordination Interface) +specification in order to provide services such as CPU on/off, reset +and power-off to the guest. + +The PSCI specification is regularly updated to provide new features, +and KVM implements these updates if they make sense from a virtualization +point of view. + +This means that a guest booted on two different versions of KVM can +observe two different "firmware" revisions. This could cause issues if +a given guest is tied to a particular PSCI revision (unlikely), or if +a migration causes a different PSCI version to be exposed out of the +blue to an unsuspecting guest. + +In order to remedy this situation, KVM exposes a set of "firmware +pseudo-registers" that can be manipulated using the GET/SET_ONE_REG +interface. These registers can be saved/restored by userspace, and set +to a convenient value if required. + +The following register is defined: + +* KVM_REG_ARM_PSCI_VERSION: + + - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set + (and thus has already been initialized) + - Returns the current PSCI version on GET_ONE_REG (defaulting to the + highest PSCI version implemented by KVM and compatible with v0.2) + - Allows any PSCI version implemented by KVM and compatible with + v0.2 to be set with SET_ONE_REG + - Affects the whole VM (even if the register view is per-vcpu) |