summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorDavid Lechner <david@lechnology.com>2018-03-15 21:52:17 -0500
committerStephen Boyd <sboyd@kernel.org>2018-03-20 09:33:08 -0700
commitb6e37ce2371dac0d696332d8e74c110030ab47c3 (patch)
tree5b759c610ba6f17f2852fbc3f9cb4399ca2b1598 /Documentation
parent7928b2cbe55b2a410a0f5c1f154610059c57b1b2 (diff)
downloadlinux-stable-b6e37ce2371dac0d696332d8e74c110030ab47c3.tar.gz
linux-stable-b6e37ce2371dac0d696332d8e74c110030ab47c3.tar.bz2
linux-stable-b6e37ce2371dac0d696332d8e74c110030ab47c3.zip
dt-bindings: clock: Add new bindings for TI Davinci PLL clocks
This adds a new binding for the PLL IP blocks in the mach-davinci family of processors. Currently, only da850 has device tree support but these bindings can also work for other SoCs in this family just by adding new compatible strings. Note: Although these PLL controllers are very similar to the TI Keystone SoCs, we are not re-using those bindings. The Keystone bindings use a legacy one-node-per-clock binding. Furthermore, the mach-davinici SoCs have a slightly different PLL register layout and a number of quirks that can't be handled by the existing bindings, so the keystone bindings could not be used as-is anyway. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/clock/ti/davinci/pll.txt96
1 files changed, 96 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
new file mode 100644
index 000000000000..36998e184821
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -0,0 +1,96 @@
+Binding for TI DaVinci PLL Controllers
+
+The PLL provides clocks to most of the components on the SoC. In addition
+to the PLL itself, this controller also contains bypasses, gates, dividers,
+an multiplexers for various clock signals.
+
+Required properties:
+- compatible: shall be one of:
+ - "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
+ - "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area.
+- clocks: phandles corresponding to the clock names
+- clock-names: names of the clock sources - depends on compatible string
+ - for "ti,da850-pll0", shall be "clksrc", "extclksrc"
+ - for "ti,da850-pll1", shall be "clksrc"
+
+Optional properties:
+- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+ wave input on the OSCIN pin instead of using a crystal oscillator.
+ This property is only valid when compatible = "ti,da850-pll0".
+
+
+Optional child nodes:
+
+pllout
+ Describes the main PLL clock output (before POSTDIV). The node name must
+ be "pllout".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+sysclk
+ Describes the PLLDIVn divider clocks that provide the SYSCLKn clock
+ domains. The node name must be "sysclk". Consumers of this node should
+ use "n" in "SYSCLKn" as the index parameter for the clock cell.
+
+ Required properties:
+ - #clock-cells: shall be 1
+
+auxclk
+ Describes the AUXCLK output of the PLL. The node name must be "auxclk".
+ This child node is only valid when compatible = "ti,da850-pll0".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+obsclk
+ Describes the OBSCLK output of the PLL. The node name must be "obsclk".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+
+Examples:
+
+ pll0: clock-controller@11000 {
+ compatible = "ti,da850-pll0";
+ reg = <0x11000 0x1000>;
+ clocks = <&ref_clk>, <&pll1_sysclk 3>;
+ clock-names = "clksrc", "extclksrc";
+ ti,clkmode-square-wave;
+
+ pll0_pllout: pllout {
+ #clock-cells = <0>;
+ };
+
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+
+ pll0_auxclk: auxclk {
+ #clock-cells = <0>;
+ };
+
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+
+ pll1: clock-controller@21a000 {
+ compatible = "ti,da850-pll1";
+ reg = <0x21a000 0x1000>;
+ clocks = <&ref_clk>;
+ clock-names = "clksrc";
+
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt