diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-08-30 20:23:07 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-08-30 20:23:07 -0700 |
commit | b6f6167ea8a424d14b41c172fe7a5f49e164f221 (patch) | |
tree | 9374c523a2704e3ff769b1c9952a60e47048676d /Documentation | |
parent | cd99b9eb4b702563c5ac7d26b632a628f5a832a5 (diff) | |
parent | 43cc31da9146f9ce60e4a03d96ef0807c2cdac94 (diff) | |
download | linux-stable-b6f6167ea8a424d14b41c172fe7a5f49e164f221.tar.gz linux-stable-b6f6167ea8a424d14b41c172fe7a5f49e164f221.tar.bz2 linux-stable-b6f6167ea8a424d14b41c172fe7a5f49e164f221.zip |
Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn
Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()
Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state
Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs
Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core
VGA:
- Simplify and clean up typos in VGA arbiter
Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use
Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties
Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it
Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload
Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset
Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled
Marvell MVEBU PCIe controller driver:
- Remove unused busn member
Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them
Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled
NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors
Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support
Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits
SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts
Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off
MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices
Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"
* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/PCI/pci-error-recovery.rst | 12 | ||||
-rw-r--r-- | Documentation/PCI/pciebus-howto.rst | 14 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 27 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pci/qcom,pcie.yaml | 28 |
4 files changed, 65 insertions, 16 deletions
diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst index c237596f67e3..0c7552a00c8c 100644 --- a/Documentation/PCI/pci-error-recovery.rst +++ b/Documentation/PCI/pci-error-recovery.rst @@ -17,7 +17,7 @@ chipsets are able to deal with these errors; these include PCI-E chipsets, and the PCI-host bridges found on IBM Power4, Power5 and Power6-based pSeries boxes. A typical action taken is to disconnect the affected device, halting all I/O to it. The goal of a disconnection is to avoid system -corruption; for example, to halt system memory corruption due to DMA's +corruption; for example, to halt system memory corruption due to DMAs to "wild" addresses. Typically, a reconnection mechanism is also offered, so that the affected PCI device(s) are reset and put back into working condition. The reset phase requires coordination @@ -178,9 +178,9 @@ is STEP 6 (Permanent Failure). complex and not worth implementing. The current powerpc implementation doesn't much care if the device - attempts I/O at this point, or not. I/O's will fail, returning + attempts I/O at this point, or not. I/Os will fail, returning a value of 0xff on read, and writes will be dropped. If more than - EEH_MAX_FAILS I/O's are attempted to a frozen adapter, EEH + EEH_MAX_FAILS I/Os are attempted to a frozen adapter, EEH assumes that the device driver has gone into an infinite loop and prints an error to syslog. A reboot is then required to get the device working again. @@ -204,7 +204,7 @@ instead will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset) .. note:: The following is proposed; no platform implements this yet: - Proposal: All I/O's should be done _synchronously_ from within + Proposal: All I/Os should be done _synchronously_ from within this callback, errors triggered by them will be returned via the normal pci_check_whatever() API, no new error_detected() callback will be issued due to an error happening here. However, @@ -258,7 +258,7 @@ Powerpc platforms implement two levels of slot reset: soft reset(default) and fundamental(optional) reset. Powerpc soft reset consists of asserting the adapter #RST line and then -restoring the PCI BAR's and PCI configuration header to a state +restoring the PCI BARs and PCI configuration header to a state that is equivalent to what it would be after a fresh system power-on followed by power-on BIOS/system firmware initialization. Soft reset is also known as hot-reset. @@ -362,7 +362,7 @@ permanent failure in some way. If the device is hotplug-capable, the operator will probably want to remove and replace the device. Note, however, not all failures are truly "permanent". Some are caused by over-heating, some by a poorly seated card. Many -PCI error events are caused by software bugs, e.g. DMA's to +PCI error events are caused by software bugs, e.g. DMAs to wild addresses or bogus split transactions due to programming errors. See the discussion in Documentation/powerpc/eeh-pci-error-recovery.rst for additional detail on real-life experience of the causes of diff --git a/Documentation/PCI/pciebus-howto.rst b/Documentation/PCI/pciebus-howto.rst index f882ff62c51f..a0027e8fb0d0 100644 --- a/Documentation/PCI/pciebus-howto.rst +++ b/Documentation/PCI/pciebus-howto.rst @@ -213,8 +213,12 @@ PCI Config Registers -------------------- Each service driver runs its PCI config operations on its own -capability structure except the PCI Express capability structure, in -which Root Control register and Device Control register are shared -between PME and AER. This patch assumes that all service drivers -will be well behaved and not overwrite other service driver's -configuration settings. +capability structure except the PCI Express capability structure, +that is shared between many drivers including the service drivers. +RMW Capability accessors (pcie_capability_clear_and_set_word(), +pcie_capability_set_word(), and pcie_capability_clear_word()) protect +a selected set of PCI Express Capability Registers (Link Control +Register and Root Control Register). Any change to those registers +should be performed using RMW accessors to avoid problems due to +concurrent updates. For the up-to-date list of protected registers, +see pcie_capability_clear_and_set_word(). diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index 811112255d7d..a223ce029cab 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -11,10 +11,13 @@ maintainers: properties: compatible: - enum: - - qcom,sdx55-pcie-ep - - qcom,sdx65-pcie-ep - - qcom,sm8450-pcie-ep + oneOf: + - enum: + - qcom,sdx55-pcie-ep + - qcom,sm8450-pcie-ep + - items: + - const: qcom,sdx65-pcie-ep + - const: qcom,sdx55-pcie-ep reg: items: @@ -71,6 +74,14 @@ properties: description: GPIO used as WAKE# output signal maxItems: 1 + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + resets: maxItems: 1 @@ -98,6 +109,8 @@ required: - interrupts - interrupt-names - reset-gpios + - interconnects + - interconnect-names - resets - reset-names - power-domains @@ -110,7 +123,6 @@ allOf: contains: enum: - qcom,sdx55-pcie-ep - - qcom,sdx65-pcie-ep then: properties: clocks: @@ -167,7 +179,9 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sdx55.h> #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sdx55.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + pcie_ep: pcie-ep@1c00000 { compatible = "qcom,sdx55-pcie-ep"; reg = <0x01c00000 0x3000>, @@ -194,6 +208,9 @@ examples: interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "global", "doorbell"; + interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>; + interconnect-names = "pcie-mem", "cpu-pcie"; reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; resets = <&gcc GCC_PCIE_BCR>; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index 81971be4e554..eadba38171e1 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -29,6 +29,7 @@ properties: - qcom,pcie-msm8996 - qcom,pcie-qcs404 - qcom,pcie-sa8540p + - qcom,pcie-sa8775p - qcom,pcie-sc7280 - qcom,pcie-sc8180x - qcom,pcie-sc8280xp @@ -211,6 +212,7 @@ allOf: compatible: contains: enum: + - qcom,pcie-sa8775p - qcom,pcie-sc7280 - qcom,pcie-sc8180x - qcom,pcie-sc8280xp @@ -748,7 +750,32 @@ allOf: compatible: contains: enum: + - qcom,pcie-sa8775p + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: - qcom,pcie-sa8540p + - qcom,pcie-sa8775p - qcom,pcie-sc8280xp then: required: @@ -790,6 +817,7 @@ allOf: contains: enum: - qcom,pcie-msm8996 + - qcom,pcie-sa8775p - qcom,pcie-sc7280 - qcom,pcie-sc8180x - qcom,pcie-sdm845 |