ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 695 deletions

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
deleted file mode 100644
index 5b1dc58d40ba..000000000000
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ /dev/null
@@ -1,695 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/bcm-nsp.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,nsp";
-	model = "Broadcom Northstar Plus SoC";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		ethernet0 = &amac0;
-		ethernet1 = &amac1;
-		ethernet2 = &amac2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			enable-method = "brcm,bcm-nsp-smp";
-			secondary-boot-reg = <0xffff0fec>;
-			reg = <0x1>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	mpcore-bus@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@0 {
-			#clock-cells = <0>;
-			compatible = "brcm,nsp-armpll";
-			clocks = <&osc>;
-			reg = <0x00000 0x1000>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		twd-timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		twd-watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	axi: axi@18000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011c40c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gpioa: gpio@20 {
-			compatible = "brcm,nsp-gpio-a";
-			reg = <0x0020 0x70>,
-			      <0x3f1c4 0x1c>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			ngpios = <32>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 0 32>;
-		};
-
-		uart0: serial@300 {
-			compatible = "ns16550a";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			status = "disabled";
-		};
-
-		uart1: serial@400 {
-			compatible = "ns16550a";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			status = "disabled";
-		};
-
-		dma: dma@20000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x20000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		sdio: mmc@21000 {
-			compatible = "brcm,sdhci-iproc-cygnus";
-			reg = <0x21000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			sdhci,auto-cmd12;
-			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		amac0: ethernet@22000 {
-			compatible = "brcm,nsp-amac";
-			reg = <0x022000 0x1000>,
-			      <0x110000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		amac1: ethernet@23000 {
-			compatible = "brcm,nsp-amac";
-			reg = <0x023000 0x1000>,
-			      <0x111000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		amac2: ethernet@24000 {
-			compatible = "brcm,nsp-amac";
-			reg = <0x024000 0x1000>,
-			      <0x112000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		mailbox: mailbox@25c00 {
-			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25c00 0x400>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <1>;
-			brcm,rx-status-len = <32>;
-			brcm,use-bcm-hdr;
-			dma-coherent;
-		};
-
-		nand_controller: nand-controller@26000 {
-			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
-			reg = <0x026000 0x600>,
-			      <0x11b408 0x600>,
-			      <0x026f00 0x20>;
-			reg-names = "nand", "iproc-idm", "iproc-ext";
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			brcm,nand-has-wp;
-		};
-
-		qspi: spi@27200 {
-			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-			reg = <0x027200 0x184>,
-			      <0x027000 0x124>,
-			      <0x11c408 0x004>,
-			      <0x0273a0 0x01c>;
-			reg-names = "mspi", "bspi", "intr_regs",
-				    "intr_status_reg";
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "spi_lr_fullness_reached",
-					  "spi_lr_session_aborted",
-					  "spi_lr_impatient",
-					  "spi_lr_session_done",
-					  "spi_lr_overhead",
-					  "mspi_done",
-					  "mspi_halted";
-			clocks = <&iprocmed>;
-			clock-names = "iprocmed";
-			num-cs = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		xhci: usb@29000 {
-			compatible = "generic-xhci";
-			reg = <0x29000 0x1000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb3_phy>;
-			phy-names = "usb3-phy";
-			dma-coherent;
-			status = "disabled";
-		};
-
-		ehci0: usb@2a000 {
-			compatible = "generic-ehci";
-			reg = <0x2a000 0x100>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		ohci0: usb@2b000 {
-			compatible = "generic-ohci";
-			reg = <0x2b000 0x100>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		crypto@2f000 {
-			compatible = "brcm,spum-nsp-crypto";
-			reg = <0x2f000 0x900>;
-			mboxes = <&mailbox 0>;
-		};
-
-		gpiob: gpio@30000 {
-			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
-			reg = <0x30000 0x50>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			ngpios = <4>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pwm: pwm@31000 {
-			compatible = "brcm,iproc-pwm";
-			reg = <0x31000 0x28>;
-			clocks = <&osc>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		mdio: mdio@32000 {
-			compatible = "brcm,iproc-mdio";
-			reg = <0x32000 0x8>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-		};
-
-		mdio-mux@32000 {
-			compatible = "mdio-mux-mmioreg", "mdio-mux";
-			reg = <0x32000 0x4>;
-			mux-mask = <0x200>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			mdio-parent-bus = <&mdio>;
-
-			mdio_int: mdio@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_phy: usb3-phy@10 {
-					compatible = "brcm,ns-bx-usb3-phy";
-					reg = <0x10>;
-					usb3-dmp-syscon = <&usb3_dmp>;
-					#phy-cells = <0>;
-					status = "disabled";
-				};
-			};
-
-			mdio_ext: mdio@200 {
-				reg = <0x200>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		rng: rng@33000 {
-			compatible = "brcm,bcm-nsp-rng";
-			reg = <0x33000 0x14>;
-		};
-
-		ccbtimer0: timer@34000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x34000 0x1000>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			clock-names = "apb_pclk";
-		};
-
-		ccbtimer1: timer@35000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x35000 0x1000>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			clock-names = "apb_pclk";
-		};
-
-		srab: ethernet-switch@36000 {
-			compatible = "brcm,nsp-srab";
-			reg = <0x36000 0x1000>,
-			      <0x3f308 0x8>,
-			      <0x3f410 0xc>;
-			reg-names = "srab", "mux_config", "sgmii_config";
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "link_state_p0",
-					  "link_state_p1",
-					  "link_state_p2",
-					  "link_state_p3",
-					  "link_state_p4",
-					  "link_state_p5",
-					  "link_state_p7",
-					  "link_state_p8",
-					  "phy",
-					  "ts",
-					  "imp_sleep_timer_p5",
-					  "imp_sleep_timer_p7",
-					  "imp_sleep_timer_p8";
-			status = "disabled";
-
-			/* ports are defined in board DTS */
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		i2c0: i2c@38000 {
-			compatible = "brcm,iproc-i2c";
-			reg = <0x38000 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		watchdog@39000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x39000 0x1000>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>, <&iprocslow>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-
-		lcpll0: lcpll0@3f100 {
-			#clock-cells = <1>;
-			compatible = "brcm,nsp-lcpll0";
-			reg = <0x3f100 0x14>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll0", "pcie_phy", "sdio",
-					     "ddr_phy";
-		};
-
-		genpll: genpll@3f140 {
-			#clock-cells = <1>;
-			compatible = "brcm,nsp-genpll";
-			reg = <0x3f140 0x24>;
-			clocks = <&osc>;
-			clock-output-names = "genpll", "phy", "ethernetclk",
-					     "usbclk", "iprocfast", "sata1",
-					     "sata2";
-		};
-
-		pinctrl: pinctrl@3f1c0 {
-			compatible = "brcm,nsp-pinmux";
-			reg = <0x3f1c0 0x04>,
-			      <0x30028 0x04>,
-			      <0x3f408 0x04>;
-		};
-
-		thermal: thermal@3f2c0 {
-			compatible = "brcm,ns-thermal";
-			reg = <0x3f2c0 0x10>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		sata_phy: sata_phy@40100 {
-			compatible = "brcm,iproc-nsp-sata-phy";
-			reg = <0x40100 0x340>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-
-			sata_phy1: sata-phy@1 {
-				reg = <1>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		sata: sata@41000 {
-			compatible = "brcm,bcm-nsp-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0x41000 0x1000>, <0x40020 0x1c>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dma-coherent;
-			status = "disabled";
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-				phy-names = "sata-phy";
-			};
-
-			sata1: sata-port@1 {
-				reg = <1>;
-				phys = <&sata_phy1>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		usb3_dmp: syscon@104000 {
-			reg = <0x104000 0x1000>;
-		};
-	};
-
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
-
-		dma-coherent;
-		status = "disabled";
-
-		msi-parent = <&msi0>;
-		msi0: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
-
-		dma-coherent;
-		status = "disabled";
-
-		msi-parent = <&msi1>;
-		msi1: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-
-	pcie2: pcie@18014000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18014000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-
-		linux,pci-domain = <2>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-
-		/* Note: The HW does not support I/O resources.  So,
-		 * only the memory resource range is being specified.
-		 */
-		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
-
-		dma-coherent;
-		status = "disabled";
-
-		msi-parent = <&msi2>;
-		msi2: msi {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-			brcm,pcie-msi-inten;
-		};
-	};
-
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-			coefficients = <(-556) 418000>;
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature     = <125000>;
-					hysteresis      = <0>;
-					type            = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-};