ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 240 deletions

diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
deleted file mode 100644
index f5c03871b205..000000000000
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A TWR Board";
-	compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
-
-	aliases {
-		enet2_rgmii_phy = &rgmii_phy1;
-		enet0_sgmii_phy = &sgmii_phy2;
-		enet1_sgmii_phy = &sgmii_phy0;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	reg_3p3v: regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-
-	panel: panel {
-		compatible = "nec,nl4827hc19-05b";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dcu_out>;
-			};
-		};
-	};
-};
-
-&dcu {
-	status = "okay";
-
-	port {
-		dcu_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&dspi1 {
-	bus-num = <0>;
-	status = "okay";
-
-	dspiflash: s25fl064k@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl064k";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy2>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&sgmii_phy0>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy1>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	ina220@40 {
-		compatible = "ti,ina220";
-		reg = <0x40>;
-		shunt-resistor = <1000>;
-	};
-
-	ina220@41 {
-		compatible = "ti,ina220";
-		reg = <0x41>;
-		shunt-resistor = <1000>;
-	};
-
-};
-
-&i2c1 {
-	status = "okay";
-	codec: sgtl5000@a {
-		#sound-dai-cells = <0>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk>;
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/* NOR Flash on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
-	status = "okay";
-
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		big-endian;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	sgmii_phy0: ethernet-phy@0 {
-		reg = <0x0>;
-	};
-	rgmii_phy1: ethernet-phy@1 {
-		reg = <0x1>;
-	};
-	sgmii_phy2: ethernet-phy@2 {
-		reg = <0x2>;
-	};
-	tbi0: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&mdio1 {
-	tbi1: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&esdhc {
-        status = "okay";
-};
-
-&qspi {
-	status = "okay";
-
-	n25q128a130: flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-};
-
-&sai1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-&can3 {
-	status = "disabled";
-};