Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "These are the devicetree updates for Arm and RISC-V based SoCs, mainly
  from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
  Starfive.

  Only a few new SoC got added:

   - TI AM62P5, a variant of the existing Sitara AM62x family

   - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
     SoC.

   - Qualcomm ipq5018 is used in wireless access points

   - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
     platform.

  In total, 29 machines get added, which is low because of the summer
  break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
  Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
  these are development and reference boards.

  Despite not adding a lot of new machines, there are over 700 patches
  in total, most of which are cleanups and minor fixes"

* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
  arm64: dts: use capital "OR" for multiple licenses in SPDX
  ARM: dts: use capital "OR" for multiple licenses in SPDX
  arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
  ARM: dts: qcom: apq8064: add support to gsbi4 uart
  riscv: dts: change TH1520 files to dual license
  riscv: dts: thead: add BeagleV Ahead board device tree
  dt-bindings: riscv: Add BeagleV Ahead board compatibles
  ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
  ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
  dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
  ARM: dts: stm32: support display on stm32f746-disco board
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
  ARM: dts: stm32: add pin map for LTDC on stm32f7
  ARM: dts: stm32: add ltdc support on stm32f746 MCU
  arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sdm670: Add PDC
  riscv: dts: starfive: fix jh7110 qspi sort order
  ...

1 files changed, 70 insertions, 11 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 1d8dd14b65cf..6f85a05ee7e1 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx93-pinfunc.h"
 
@@ -132,6 +133,44 @@
 		interrupt-parent = <&gic>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -252,7 +291,7 @@
 			};
 
 			lpuart1: serial@44380000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x44380000 0x1000>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
@@ -261,7 +300,7 @@
 			};
 
 			lpuart2: serial@44390000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x44390000 0x1000>;
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
@@ -343,6 +382,26 @@
 				reg = <0x44480000 0x2000>;
 			};
 
+			tmu: tmu@44482000 {
+				compatible = "fsl,qoriq-tmu";
+				reg = <0x44482000 0x1000>;
+				clocks = <&clk IMX93_CLK_TMC_GATE>;
+				little-endian;
+				fsl,tmu-range = <0x800000da 0x800000e9
+						 0x80000102 0x8000012a
+						 0x80000166 0x800001a7
+						 0x800001b6>;
+				fsl,tmu-calibration = <0x00000000 0x0000000e
+						       0x00000001 0x00000029
+						       0x00000002 0x00000056
+						       0x00000003 0x000000a2
+						       0x00000004 0x00000116
+						       0x00000005 0x00000195
+						       0x00000006 0x000001b2>;
+				#thermal-sensor-cells = <1>;
+			};
+
+
 			adc1: adc@44530000 {
 				compatible = "nxp,imx93-adc";
 				reg = <0x44530000 0x10000>;
@@ -486,7 +545,7 @@
 			};
 
 			lpuart3: serial@42570000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42570000 0x1000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
@@ -495,7 +554,7 @@
 			};
 
 			lpuart4: serial@42580000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42580000 0x1000>;
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
@@ -504,7 +563,7 @@
 			};
 
 			lpuart5: serial@42590000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42590000 0x1000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
@@ -513,7 +572,7 @@
 			};
 
 			lpuart6: serial@425a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x425a0000 0x1000>;
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
@@ -551,7 +610,7 @@
 			};
 
 			lpuart7: serial@42690000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
@@ -560,7 +619,7 @@
 			};
 
 			lpuart8: serial@426a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x426a0000 0x1000>;
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
@@ -683,7 +742,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <8>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -697,7 +756,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -760,7 +819,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 		};