diff options
author | Fabio Estevam <festevam@gmail.com> | 2020-09-02 09:49:51 -0300 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2020-09-05 15:34:29 +0800 |
commit | e1324ece2af442f60f77c42b141db6549fda6afd (patch) | |
tree | e32011ba0b4bcead62028729d9bb947672759e91 /arch/arm | |
parent | c93197b0041d7c48263228bffb4520b7c066e02f (diff) | |
download | linux-stable-e1324ece2af442f60f77c42b141db6549fda6afd.tar.gz linux-stable-e1324ece2af442f60f77c42b141db6549fda6afd.tar.bz2 linux-stable-e1324ece2af442f60f77c42b141db6549fda6afd.zip |
ARM: imx: Remove i.MX35 board files
i.MX35 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx35 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/configs/imx_v6_v7_defconfig | 5 | ||||
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 73 | ||||
-rw-r--r-- | arch/arm/mach-imx/Makefile | 8 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-imx35.c (renamed from arch/arm/mach-imx/imx35-dt.c) | 0 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-mx35_3ds.c | 516 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-pcm043.c | 412 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-vpr200.c | 306 |
7 files changed, 10 insertions, 1310 deletions
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0220aa5d2571..e1d83018d022 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -15,11 +15,8 @@ CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_MXC=y -CONFIG_MACH_IMX35_DT=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_VPR200=y CONFIG_SOC_IMX31=y +CONFIG_SOC_IMX35=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 78475ef7e5d9..c23e10fa8242 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -53,14 +53,10 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config SOC_IMX35 - bool - select ARCH_MXC_IOMUX_V3 - select MXC_AVIC - select PINCTRL_IMX35 - if ARCH_MULTI_V6 +comment "ARM1136 platforms" + config SOC_IMX31 bool "i.MX31 support" select CPU_V6 @@ -68,66 +64,13 @@ config SOC_IMX31 help This enables support for Freescale i.MX31 processor -comment "MX35 platforms:" - -config MACH_IMX35_DT - bool "Support i.MX35 platforms from device tree" - select SOC_IMX35 - help - Include support for Freescale i.MX35 based platforms - using the device tree for discovery. - -config MACH_PCM043 - bool "Support Phytec pcm043 (i.MX35) platforms" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX35 - help - Include support for Phytec pcm043 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_MX35_3DS - bool "Support MX35PDK platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_RTC - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_DEBUG_BOARD - select SOC_IMX35 - help - Include support for MX35PDK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_VPR200 - bool "Support VPR200 platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX35 +config SOC_IMX35 + bool "i.MX35 support" + select ARCH_MXC_IOMUX_V3 + select MXC_AVIC + select PINCTRL_IMX35 help - Include support for VPR200 platform. This includes specific - configurations for the board and its peripherals. + This enables support for Freescale i.MX31 processor endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1b3c0cad148b..d6607f3000d9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o mach-imx31.o -obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o mach-imx35.o imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y) @@ -35,12 +35,6 @@ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif -# i.MX35 based machines -obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o -obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o -obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o - obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/mach-imx35.c index ec5c3068715c..ec5c3068715c 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/mach-imx35.c diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c deleted file mode 100644 index 802e0abe4568..000000000000 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ /dev/null @@ -1,516 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * Copyright (C) 2011 Meprolight, Ltd. - * Alex Gershgorin <alexg@meprolight.com> - * - * Modified from i.MX31 3-Stack Development System - */ - -/* - * This machine is known as: - * - i.MX35 3-Stack Development System - * - i.MX35 Platform Development Kit (i.MX35 PDK) - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/usb/otg.h> - -#include <linux/mtd/physmap.h> -#include <linux/mfd/mc13892.h> -#include <linux/regulator/machine.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <video/platform_lcd.h> - -#include "3ds_debugboard.h" -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx35.h" - -#define GPIO_MC9S08DZ60_GPS_ENABLE 0 -#define GPIO_MC9S08DZ60_HDD_ENABLE 4 -#define GPIO_MC9S08DZ60_WIFI_ENABLE 5 -#define GPIO_MC9S08DZ60_LCD_ENABLE 6 -#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8 - -static const struct fb_videomode fb_modedb[] = { - { - /* 800x480 @ 55 Hz */ - .name = "Ceramate-CLAA070VC01", - .refresh = 55, - .xres = 800, - .yres = 480, - .pixclock = 40000, - .left_margin = 40, - .right_margin = 40, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 20, - .vsync_len = 10, - .sync = FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "Ceramate-CLAA070VC01", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct i2c_board_info __initdata i2c_devices_3ds[] = { - { - I2C_BOARD_INFO("mc9s08dz60", 0x69), - }, -}; - -static int lcd_power_gpio = -ENXIO; - -static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data) -{ - return !strcmp(chip->label, data); -} - -static void mx35_3ds_lcd_set_power( - struct plat_lcd_data *pd, unsigned int power) -{ - struct gpio_chip *chip; - - if (!gpio_is_valid(lcd_power_gpio)) { - chip = gpiochip_find( - "mc9s08dz60", mc9s08dz60_gpiochip_match); - if (chip) { - lcd_power_gpio = - chip->base + GPIO_MC9S08DZ60_LCD_ENABLE; - if (gpio_request(lcd_power_gpio, "lcd_power") < 0) { - pr_err("error: gpio already requested!\n"); - lcd_power_gpio = -ENXIO; - } - } else { - pr_err("error: didn't find mc9s08dz60 gpio chip\n"); - } - } - - if (gpio_is_valid(lcd_power_gpio)) - gpio_set_value_cansleep(lcd_power_gpio, power); -} - -static struct plat_lcd_data mx35_3ds_lcd_data = { - .set_power = mx35_3ds_lcd_set_power, -}; - -static struct platform_device mx35_3ds_lcd = { - .name = "platform-lcd", - .dev.platform_data = &mx35_3ds_lcd_data, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct physmap_flash_data mx35pdk_flash_data = { - .width = 2, -}; - -static struct resource mx35pdk_flash_resource = { - .start = MX35_CS0_BASE_ADDR, - .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mx35pdk_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mx35pdk_flash_data, - }, - .resource = &mx35pdk_flash_resource, - .num_resources = 1, -}; - -static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct platform_device *devices[] __initdata = { - &mx35pdk_flash, -}; - -static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* USBOTG */ - MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, - MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, - /* USBH1 */ - MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, - MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - MX35_PAD_D3_REV__IPU_DISPB_D3_REV, - MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - /*PMIC IRQ*/ - MX35_PAD_GPIO2_0__GPIO2_0, -}; - -static struct regulator_consumer_supply sw1_consumers[] = { - { - .supply = "cpu_vcc", - } -}; - -static struct regulator_consumer_supply vcam_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDA", "0-000a"), -}; - -static struct regulator_init_data sw1_init = { - .constraints = { - .name = "SW1", - .min_uV = 600000, - .max_uV = 1375000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = 0, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), - .consumer_supplies = sw1_consumers, -}; - -static struct regulator_init_data sw2_init = { - .constraints = { - .name = "SW2", - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data sw3_init = { - .constraints = { - .name = "SW3", - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data sw4_init = { - .constraints = { - .name = "SW4", - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data viohi_init = { - .constraints = { - .name = "VIOHI", - .boot_on = 1, - } -}; - -static struct regulator_init_data vusb_init = { - .constraints = { - .name = "VUSB", - .boot_on = 1, - } -}; - -static struct regulator_init_data vdig_init = { - .constraints = { - .name = "VDIG", - .boot_on = 1, - } -}; - -static struct regulator_init_data vpll_init = { - .constraints = { - .name = "VPLL", - .boot_on = 1, - } -}; - -static struct regulator_init_data vusb2_init = { - .constraints = { - .name = "VUSB2", - .boot_on = 1, - } -}; - -static struct regulator_init_data vvideo_init = { - .constraints = { - .name = "VVIDEO", - .boot_on = 1 - } -}; - -static struct regulator_init_data vcam_init = { - .constraints = { - .name = "VCAM", - .min_uV = 2500000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, - .boot_on = 1 - }, - .num_consumer_supplies = ARRAY_SIZE(vcam_consumers), - .consumer_supplies = vcam_consumers, -}; - -static struct regulator_init_data vgen1_init = { - .constraints = { - .name = "VGEN1", - } -}; - -static struct regulator_init_data vgen2_init = { - .constraints = { - .name = "VGEN2", - .boot_on = 1, - } -}; - -static struct regulator_init_data vgen3_init = { - .constraints = { - .name = "VGEN3", - } -}; - -static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = { - { .id = MC13892_SW1, .init_data = &sw1_init }, - { .id = MC13892_SW2, .init_data = &sw2_init }, - { .id = MC13892_SW3, .init_data = &sw3_init }, - { .id = MC13892_SW4, .init_data = &sw4_init }, - { .id = MC13892_VIOHI, .init_data = &viohi_init }, - { .id = MC13892_VPLL, .init_data = &vpll_init }, - { .id = MC13892_VDIG, .init_data = &vdig_init }, - { .id = MC13892_VUSB2, .init_data = &vusb2_init }, - { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, - { .id = MC13892_VCAM, .init_data = &vcam_init }, - { .id = MC13892_VGEN1, .init_data = &vgen1_init }, - { .id = MC13892_VGEN2, .init_data = &vgen2_init }, - { .id = MC13892_VGEN3, .init_data = &vgen3_init }, - { .id = MC13892_VUSB, .init_data = &vusb_init }, -}; - -static struct mc13xxx_platform_data mx35_3ds_mc13892_data = { - .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, - .regulators = { - .num_regulators = ARRAY_SIZE(mx35_3ds_regulators), - .regulators = mx35_3ds_regulators, - }, -}; - -#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) - -static struct i2c_board_info mx35_3ds_i2c_mc13892 = { - - I2C_BOARD_INFO("mc13892", 0x08), - .platform_data = &mx35_3ds_mc13892_data, - /* irq number is run-time assigned */ -}; - -static void __init imx35_3ds_init_mc13892(void) -{ - int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq"); - - if (ret) { - pr_err("failed to get pmic irq: %d\n", ret); - return; - } - - mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT); - i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1); -} - -static int mx35_3ds_otg_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); -} - -/* OTG config */ -static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -/* - * ENGCM09152 also requires a hardware change. - * Please check the MX35 Chip Errata document for details. - */ -}; - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = mx35_3ds_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int mx35_3ds_usbh_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY); -} - -/* USB HOST config */ -static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { - .init = mx35_3ds_usbh_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static bool otg_mode_host __initdata; - -static int __init mx35_3ds_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", mx35_3ds_otg_mode); - -static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { - .bitrate = 100000, -}; - -/* - * Board specific initialization. - */ -static void __init mx35_3ds_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); - - imx35_add_fec(NULL); - imx35_add_imx2_wdt(); - imx35_add_mxc_rtc(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx35_add_imx_uart0(&uart_pdata); - - if (otg_mode_host) - imx35_add_mxc_ehci_otg(&otg_pdata); - - imx35_add_mxc_ehci_hs(&usb_host_pdata); - - if (!otg_mode_host) - imx35_add_fsl_usb2_udc(&usb_otg_pdata); - - imx35_add_mxc_nand(&mx35pdk_nand_board_info); - imx35_add_sdhci_esdhc_imx(0, NULL); - - imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); - - i2c_register_board_info( - 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); - - imx35_add_ipu_core(); -} - -static void __init mx35_3ds_late_init(void) -{ - struct platform_device *imx35_fb_pdev; - - if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) - pr_warn("Init of the debugboard failed, all " - "devices on the debugboard are unusable.\n"); - - imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); - mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; - platform_device_register(&mx35_3ds_lcd); - - imx35_3ds_init_mc13892(); -} - -static void __init mx35pdk_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(MX35_3DS, "Freescale MX35PDK") - /* Maintainer: Freescale Semiconductor, Inc */ - .atag_offset = 0x100, - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = mx35pdk_timer_init, - .init_machine = mx35_3ds_init, - .init_late = mx35_3ds_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c deleted file mode 100644 index 017a50113005..000000000000 --- a/arch/arm/mach-imx/mach-pcm043.c +++ /dev/null @@ -1,412 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Sascha Hauer, Pengutronix - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/smc911x.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/property.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx35.h" -#include "ulpi.h" - -static const struct fb_videomode fb_modedb[] = { - { - /* 240x320 @ 60 Hz */ - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "Sharp-LQ035Q7", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct physmap_flash_data pcm043_flash_data = { - .width = 2, -}; - -static struct resource pcm043_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm043_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm043_flash_data, - }, - .resource = &pcm043_flash_resource, - .num_resources = 1, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { - .bitrate = 50000, -}; - -static const struct property_entry board_eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 32), - { } -}; - -static struct i2c_board_info pcm043_i2c_devices[] = { - { - I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */ - .properties = board_eeprom_properties, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static struct platform_device *devices[] __initdata = { - &pcm043_flash, -}; - -static const iomux_v3_cfg_t pcm043_pads[] __initconst = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* UART2 */ - MX35_PAD_CTS2__UART2_CTS, - MX35_PAD_RTS2__UART2_RTS, - MX35_PAD_TXD2__UART2_TXD_MUX, - MX35_PAD_RXD2__UART2_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - MX35_PAD_D3_REV__IPU_DISPB_D3_REV, - MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - /* gpio */ - MX35_PAD_ATA_CS0__GPIO2_6, - /* USB host */ - MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, - MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, - /* SSI */ - MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, - MX35_PAD_STXD4__AUDMUX_AUD4_TXD, - MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, - MX35_PAD_SCK4__AUDMUX_AUD4_TXC, - /* CAN2 */ - MX35_PAD_TX5_RX0__CAN2_TXCAN, - MX35_PAD_TX4_RX1__CAN2_RXCAN, - /* esdhc */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */ - MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */ -}; - -#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31) -#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28) -#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0) - -static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) -{ - iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; - int ret; - - ret = gpio_request(AC97_GPIO_TXFS, "SSI"); - if (ret) { - printk("failed to get GPIO_TXFS: %d\n", ret); - return; - } - - mxc_iomux_v3_setup_pad(txfs_gpio); - - /* warm reset */ - gpio_direction_output(AC97_GPIO_TXFS, 1); - udelay(2); - gpio_set_value(AC97_GPIO_TXFS, 0); - - gpio_free(AC97_GPIO_TXFS); - mxc_iomux_v3_setup_pad(txfs); -} - -static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) -{ - iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; - iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28; - iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; - iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; - int ret; - - ret = gpio_request(AC97_GPIO_TXFS, "SSI"); - if (ret) - goto err1; - - ret = gpio_request(AC97_GPIO_TXD, "SSI"); - if (ret) - goto err2; - - ret = gpio_request(AC97_GPIO_RESET, "SSI"); - if (ret) - goto err3; - - mxc_iomux_v3_setup_pad(txfs_gpio); - mxc_iomux_v3_setup_pad(txd_gpio); - mxc_iomux_v3_setup_pad(reset_gpio); - - gpio_direction_output(AC97_GPIO_TXFS, 0); - gpio_direction_output(AC97_GPIO_TXD, 0); - - /* cold reset */ - gpio_direction_output(AC97_GPIO_RESET, 0); - udelay(10); - gpio_direction_output(AC97_GPIO_RESET, 1); - - mxc_iomux_v3_setup_pad(txd); - mxc_iomux_v3_setup_pad(txfs); - - gpio_free(AC97_GPIO_RESET); -err3: - gpio_free(AC97_GPIO_TXD); -err2: - gpio_free(AC97_GPIO_TXFS); -err1: - if (ret) - printk("%s failed with %d\n", __func__, ret); - mdelay(1); -} - -static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = { - .ac97_reset = pcm043_ac97_cold_reset, - .ac97_warm_reset = pcm043_ac97_warm_reset, - .flags = IMX_SSI_USE_AC97, -}; - -static const struct mxc_nand_platform_data -pcm037_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static int pcm043_otg_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = pcm043_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int pcm043_usbh1_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); -} - -static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { - .init = pcm043_usbh1_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, -}; - -static bool otg_mode_host __initdata; - -static int __init pcm043_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", pcm043_otg_mode); - -static struct esdhc_platform_data sd1_pdata = { - .wp_type = ESDHC_WP_GPIO, - .cd_type = ESDHC_CD_GPIO, -}; - -static struct gpiod_lookup_table sd1_gpio_table = { - .dev_id = "sdhci-esdhc-imx35.0", - .table = { - /* Card detect: bank 2 offset 24 */ - GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW), - /* Write protect: bank 2 offset 23 */ - GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW), - { }, - }, -}; - -/* - * Board specific initialization. - */ -static void __init pcm043_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); - - imx35_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); - imx35_add_imx2_wdt(); - - imx35_add_imx_uart0(&uart_pdata); - imx35_add_mxc_nand(&pcm037_nand_board_info); - - imx35_add_imx_uart1(&uart_pdata); - - i2c_register_board_info(0, pcm043_i2c_devices, - ARRAY_SIZE(pcm043_i2c_devices)); - - imx35_add_imx_i2c0(&pcm043_i2c0_data); - - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx35_add_mxc_ehci_otg(&otg_pdata); - } - imx35_add_mxc_ehci_hs(&usbh1_pdata); - - if (!otg_mode_host) - imx35_add_fsl_usb2_udc(&otg_device_pdata); - - imx35_add_flexcan1(); -} - -static void __init pcm043_late_init(void) -{ - imx35_add_imx_ssi(0, &pcm043_ssi_pdata); - - gpiod_add_lookup_table(&sd1_gpio_table); - imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); -} - -static void __init pcm043_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(PCM043, "Phytec Phycore pcm043") - /* Maintainer: Pengutronix */ - .atag_offset = 0x100, - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = pcm043_timer_init, - .init_machine = pcm043_init, - .init_late = pcm043_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c deleted file mode 100644 index fae5a41b5f6c..000000000000 --- a/arch/arm/mach-imx/mach-vpr200.c +++ /dev/null @@ -1,306 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix - * Copyright 2010 Creative Product Design - * - * Derived from mx35 3stack. - * Original author: Fabio Estevam <fabio.estevam@freescale.com> - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/memory.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include <linux/i2c.h> -#include <linux/mfd/mc13xxx.h> - -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx35.h" - -#define GPIO_LCDPWR IMX_GPIO_NR(1, 2) -#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) - -#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4) -#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5) -#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7) -#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8) -#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9) -#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10) -#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11) -#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12) - -static const struct fb_videomode fb_modedb[] = { - { - /* 800x480 @ 60 Hz */ - .name = "PT0708048", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = KHZ2PICOS(33260), - .left_margin = 50, - .right_margin = 156, - .upper_margin = 10, - .lower_margin = 10, - .hsync_len = 1, /* note: DE only display */ - .vsync_len = 1, /* note: DE only display */ - .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 800x480 @ 60 Hz */ - .name = "CTP-CLAA070LC0ACW", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = KHZ2PICOS(27000), - .left_margin = 50, - .right_margin = 50, /* whole line should have 900 clocks */ - .upper_margin = 10, - .lower_margin = 10, /* whole frame should have 500 lines */ - .hsync_len = 1, /* note: DE only display */ - .vsync_len = 1, /* note: DE only display */ - .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - } -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "PT0708048", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct physmap_flash_data vpr200_flash_data = { - .width = 2, -}; - -static struct resource vpr200_flash_resource = { - .start = MX35_CS0_BASE_ADDR, - .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device vpr200_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &vpr200_flash_data, - }, - .resource = &vpr200_flash_resource, - .num_resources = 1, -}; - -static const struct mxc_nand_platform_data - vpr200_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -#define VPR_KEY_DEBOUNCE 500 -static struct gpio_keys_button vpr200_gpio_keys_table[] = { - {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE}, - {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE}, - {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE}, - {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE}, - {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE}, - {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE}, - {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE}, - {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE}, -}; - -static const struct gpio_keys_platform_data - vpr200_gpio_keys_data __initconst = { - .buttons = vpr200_gpio_keys_table, - .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table), -}; - -static struct mc13xxx_platform_data vpr200_pmic = { - .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, -}; - -static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = { - .bitrate = 50000, -}; - -static struct i2c_board_info vpr200_i2c_devices[] = { - { - I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */ - }, { - I2C_BOARD_INFO("mc13892", 0x08), - .platform_data = &vpr200_pmic, - /* irq number is run-time assigned */ - } -}; - -static const iomux_v3_cfg_t vpr200_pads[] __initconst = { - /* UART1 */ - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* UART3 */ - MX35_PAD_ATA_DATA10__UART3_RXD_MUX, - MX35_PAD_ATA_DATA11__UART3_TXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - /* LCD Enable */ - MX35_PAD_D3_VSYNC__GPIO1_2, - /* USBOTG */ - MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, - MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - /* PMIC */ - MX35_PAD_GPIO2_0__GPIO2_0, - /* GPIO keys */ - MX35_PAD_SCKR__GPIO1_4, - MX35_PAD_COMPARE__GPIO1_5, - MX35_PAD_SCKT__GPIO1_7, - MX35_PAD_FST__GPIO1_8, - MX35_PAD_HCKT__GPIO1_9, - MX35_PAD_TX5_RX0__GPIO1_10, - MX35_PAD_TX4_RX1__GPIO1_11, - MX35_PAD_TX3_RX2__GPIO1_12, -}; - -/* USB Device config */ -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static int vpr200_usbh_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, - MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY); -} - -/* USB HOST config */ -static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { - .init = vpr200_usbh_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static struct platform_device *devices[] __initdata = { - &vpr200_flash, -}; - -/* - * Board specific initialization. - */ -static void __init vpr200_board_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); - - imx35_add_fec(NULL); - imx35_add_imx2_wdt(); - - imx35_add_imx_uart0(NULL); - imx35_add_imx_uart2(NULL); - - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - imx35_add_fsl_usb2_udc(&otg_device_pdata); - imx35_add_mxc_ehci_hs(&usb_host_pdata); - - imx35_add_mxc_nand(&vpr200_nand_board_info); - imx35_add_sdhci_esdhc_imx(0, NULL); -} - -static void __init vpr200_late_init(void) -{ - imx_add_gpio_keys(&vpr200_gpio_keys_data); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR")) - printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n"); - else - gpio_direction_output(GPIO_LCDPWR, 0); - - if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT")) - printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n"); - else - gpio_direction_input(GPIO_PMIC_INT); - - vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT); - i2c_register_board_info(0, vpr200_i2c_devices, - ARRAY_SIZE(vpr200_i2c_devices)); - - imx35_add_imx_i2c0(&vpr200_i2c0_data); -} - -static void __init vpr200_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(VPR200, "VPR200") - /* Maintainer: Creative Product Design */ - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = vpr200_timer_init, - .init_machine = vpr200_board_init, - .init_late = vpr200_late_init, - .restart = mxc_restart, -MACHINE_END |