MIPS: Fork loongson2ef from loongson64

As later model of GSx64 family processors including 2-series-soc have
similar design with initial loongson3a while loongson2e/f seems less
identical, we separate loongson2e/f support code out of mach-loongson64
to make our life easier.

This patch contains mostly file moving works.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[paulburton@kernel.org: Squash in the MAINTAINERS updates]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: paul.burton@mips.com

25 files changed, 0 insertions, 2415 deletions

diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index d08b20ff2b27..0e99a5af6e90 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -4,65 +4,6 @@ if MACH_LOONGSON64
 choice
 	prompt "Machine Type"
 
-config LEMOTE_FULOONG2E
-	bool "Lemote Fuloong(2e) mini-PC"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_MIGHT_HAVE_PC_SERIO
-	select CEVT_R4K
-	select CSRC_R4K
-	select SYS_HAS_CPU_LOONGSON2E
-	select DMA_NONCOHERENT
-	select BOOT_ELF32
-	select BOARD_SCACHE
-	select HAVE_PCI
-	select I8259
-	select ISA
-	select IRQ_MIPS_CPU
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_HAS_EARLY_PRINTK
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select CPU_HAS_WB
-	select LOONGSON_MC146818
-	help
-	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
-	  an FPGA northbridge
-
-	  Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
-
-config LEMOTE_MACH2F
-	bool "Lemote Loongson 2F family machines"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_MIGHT_HAVE_PC_SERIO
-	select BOARD_SCACHE
-	select BOOT_ELF32
-	select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
-	select CPU_HAS_WB
-	select CS5536
-	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
-	select DMA_NONCOHERENT
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select HAVE_CLK
-	select HAVE_PCI
-	select I8259
-	select IRQ_MIPS_CPU
-	select ISA
-	select SYS_HAS_CPU_LOONGSON2F
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select LOONGSON_MC146818
-	help
-	  Lemote Loongson 2F family machines utilize the 2F revision of
-	  Loongson processor and the AMD CS5536 south bridge.
-
-	  These family machines include fuloong2f mini PC, yeeloong2f notebook,
-	  LingLoong allinone PC and so forth.
-
 config LOONGSON_MACH3X
 	bool "Generic Loongson 3 family machines"
 	select ARCH_SPARSEMEM_ENABLE
@@ -95,22 +36,6 @@ config LOONGSON_MACH3X
 		of Loongson processor and RS780/SBX00 chipset.
 endchoice
 
-config CS5536
-	bool
-
-config CS5536_MFGPT
-	bool "CS5536 MFGPT Timer"
-	depends on CS5536 && !HIGH_RES_TIMERS
-	select MIPS_EXTERNAL_TIMER
-	help
-	  This option enables the mfgpt0 timer of AMD CS5536. With this timer
-	  switched on you can not use high resolution timers.
-
-	  If you want to enable the Loongson2 CPUFreq Driver, Please enable
-	  this option at first, otherwise, You will get wrong system time.
-
-	  If unsure, say Yes.
-
 config RS780_HPET
 	bool "RS780/SBX00 HPET Timer"
 	depends on LOONGSON_MACH3X
diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile
index c74bc0251e9d..dc16a23c171f 100644
--- a/arch/mips/loongson64/Makefile
+++ b/arch/mips/loongson64/Makefile
@@ -6,18 +6,6 @@
 obj-$(CONFIG_MACH_LOONGSON64) += common/
 
 #
-# Lemote Fuloong mini-PC (Loongson 2E-based)
-#
-
-obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fuloong-2e/
-
-#
-# Lemote loongson2f family machines
-#
-
-obj-$(CONFIG_LEMOTE_MACH2F)  += lemote-2f/
-
-#
 # All Loongson-3 family machines
 #
 
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 4da74eea7de8..31167e568e46 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -2,25 +2,6 @@
 # Loongson Processors' Support
 #
 
-# Only gcc >= 4.4 have Loongson specific support
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += \
-	$(call cc-option,-march=loongson2e,-march=r4600)
-cflags-$(CONFIG_CPU_LOONGSON2F) += \
-	$(call cc-option,-march=loongson2f,-march=r4600)
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
-  else
-    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
-  endif
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
-  else
-    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
-  endif
-endif
 
 cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
 
@@ -72,6 +53,4 @@ endif
 
 platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
 cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely
-load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
-load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
 load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 684624f61f5a..85438df80950 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -15,12 +15,6 @@ obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
 obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
 #
-# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
-# space
-#
-obj-$(CONFIG_CS5536) += cs5536/
-
-#
 # Suspend Support
 #
 
diff --git a/arch/mips/loongson64/common/cs5536/Makefile b/arch/mips/loongson64/common/cs5536/Makefile
deleted file mode 100644
index b32b29661245..000000000000
--- a/arch/mips/loongson64/common/cs5536/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for CS5536 support.
-#
-
-obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
-			cs5536_isa.o cs5536_ehci.o
-
-#
-# Enable cs5536 mfgpt Timer
-#
-obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_acc.c b/arch/mips/loongson64/common/cs5536/cs5536_acc.c
deleted file mode 100644
index ff50aae72916..000000000000
--- a/arch/mips/loongson64/common/cs5536/cs5536_acc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * the ACC Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_acc_write_reg(int reg, u32 value)
-{
-	u32 hi = 0, lo = value;
-
-	switch (reg) {
-	case PCI_COMMAND:
-		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
-		if (value & PCI_COMMAND_MASTER)
-			lo |= (0x03 << 8);
-		else
-			lo &= ~(0x03 << 8);
-		_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
-		break;
-	case PCI_STATUS:
-		if (value & PCI_STATUS_PARITY) {
-			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-			if (lo & SB_PARE_ERR_FLAG) {
-				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
-				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
-			}
-		}
-		break;
-	case PCI_BAR0_REG:
-		if (value == PCI_BAR_RANGE_MASK) {
-			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-			lo |= SOFT_BAR_ACC_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else if (value & 0x01) {
-			value &= 0xfffffffc;
-			hi = 0xA0000000 | ((value & 0x000ff000) >> 12);
-			lo = 0x000fff80 | ((value & 0x00000fff) << 20);
-			_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo);
-		}
-		break;
-	case PCI_ACC_INT_REG:
-		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
-		/* disable all the usb interrupt in PIC */
-		lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT);
-		if (value)	/* enable all the acc interrupt in PIC */
-			lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT);
-		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
-		break;
-	default:
-		break;
-	}
-}
-
-u32 pci_acc_read_reg(int reg)
-{
-	u32 hi, lo;
-	u32 conf_data = 0;
-
-	switch (reg) {
-	case PCI_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID);
-		break;
-	case PCI_COMMAND:
-		_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
-		if (((lo & 0xfff00000) || (hi & 0x000000ff))
-		    && ((hi & 0xf0000000) == 0xa0000000))
-			conf_data |= PCI_COMMAND_IO;
-		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
-		if ((lo & 0x300) == 0x300)
-			conf_data |= PCI_COMMAND_MASTER;
-		break;
-	case PCI_STATUS:
-		conf_data |= PCI_STATUS_66MHZ;
-		conf_data |= PCI_STATUS_FAST_BACK;
-		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-		if (lo & SB_PARE_ERR_FLAG)
-			conf_data |= PCI_STATUS_PARITY;
-		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
-		break;
-	case PCI_CLASS_REVISION:
-		_rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo);
-		conf_data = lo & 0x000000ff;
-		conf_data |= (CS5536_ACC_CLASS_CODE << 8);
-		break;
-	case PCI_CACHE_LINE_SIZE:
-		conf_data =
-		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
-					    PCI_NORMAL_LATENCY_TIMER);
-		break;
-	case PCI_BAR0_REG:
-		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-		if (lo & SOFT_BAR_ACC_FLAG) {
-			conf_data = CS5536_ACC_RANGE |
-			    PCI_BASE_ADDRESS_SPACE_IO;
-			lo &= ~SOFT_BAR_ACC_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else {
-			_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
-			conf_data = (hi & 0x000000ff) << 12;
-			conf_data |= (lo & 0xfff00000) >> 20;
-			conf_data |= 0x01;
-			conf_data &= ~0x02;
-		}
-		break;
-	case PCI_CARDBUS_CIS:
-		conf_data = PCI_CARDBUS_CIS_POINTER;
-		break;
-	case PCI_SUBSYSTEM_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID);
-		break;
-	case PCI_ROM_ADDRESS:
-		conf_data = PCI_EXPANSION_ROM_BAR;
-		break;
-	case PCI_CAPABILITY_LIST:
-		conf_data = PCI_CAPLIST_USB_POINTER;
-		break;
-	case PCI_INTERRUPT_LINE:
-		conf_data =
-		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR);
-		break;
-	default:
-		break;
-	}
-
-	return conf_data;
-}
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c b/arch/mips/loongson64/common/cs5536/cs5536_ehci.c
deleted file mode 100644
index bd4c39fe6109..000000000000
--- a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * the EHCI Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_ehci_write_reg(int reg, u32 value)
-{
-	u32 hi = 0, lo = value;
-
-	switch (reg) {
-	case PCI_COMMAND:
-		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-		if (value & PCI_COMMAND_MASTER)
-			hi |= PCI_COMMAND_MASTER;
-		else
-			hi &= ~PCI_COMMAND_MASTER;
-
-		if (value & PCI_COMMAND_MEMORY)
-			hi |= PCI_COMMAND_MEMORY;
-		else
-			hi &= ~PCI_COMMAND_MEMORY;
-		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
-		break;
-	case PCI_STATUS:
-		if (value & PCI_STATUS_PARITY) {
-			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-			if (lo & SB_PARE_ERR_FLAG) {
-				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
-				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
-			}
-		}
-		break;
-	case PCI_BAR0_REG:
-		if (value == PCI_BAR_RANGE_MASK) {
-			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-			lo |= SOFT_BAR_EHCI_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else if ((value & 0x01) == 0x00) {
-			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-			lo = value;
-			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
-
-			value &= 0xfffffff0;
-			hi = 0x40000000 | ((value & 0xff000000) >> 24);
-			lo = 0x000fffff | ((value & 0x00fff000) << 8);
-			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo);
-		}
-		break;
-	case PCI_EHCI_LEGSMIEN_REG:
-		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-		hi &= 0x003f0000;
-		hi |= (value & 0x3f) << 16;
-		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
-		break;
-	case PCI_EHCI_FLADJ_REG:
-		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-		hi &= ~0x00003f00;
-		hi |= value & 0x00003f00;
-		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
-		break;
-	default:
-		break;
-	}
-}
-
-u32 pci_ehci_read_reg(int reg)
-{
-	u32 conf_data = 0;
-	u32 hi, lo;
-
-	switch (reg) {
-	case PCI_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID);
-		break;
-	case PCI_COMMAND:
-		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-		if (hi & PCI_COMMAND_MASTER)
-			conf_data |= PCI_COMMAND_MASTER;
-		if (hi & PCI_COMMAND_MEMORY)
-			conf_data |= PCI_COMMAND_MEMORY;
-		break;
-	case PCI_STATUS:
-		conf_data |= PCI_STATUS_66MHZ;
-		conf_data |= PCI_STATUS_FAST_BACK;
-		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-		if (lo & SB_PARE_ERR_FLAG)
-			conf_data |= PCI_STATUS_PARITY;
-		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
-		break;
-	case PCI_CLASS_REVISION:
-		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
-		conf_data = lo & 0x000000ff;
-		conf_data |= (CS5536_EHCI_CLASS_CODE << 8);
-		break;
-	case PCI_CACHE_LINE_SIZE:
-		conf_data =
-		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
-					    PCI_NORMAL_LATENCY_TIMER);
-		break;
-	case PCI_BAR0_REG:
-		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-		if (lo & SOFT_BAR_EHCI_FLAG) {
-			conf_data = CS5536_EHCI_RANGE |
-			    PCI_BASE_ADDRESS_SPACE_MEMORY;
-			lo &= ~SOFT_BAR_EHCI_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else {
-			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-			conf_data = lo & 0xfffff000;
-		}
-		break;
-	case PCI_CARDBUS_CIS:
-		conf_data = PCI_CARDBUS_CIS_POINTER;
-		break;
-	case PCI_SUBSYSTEM_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
-		break;
-	case PCI_ROM_ADDRESS:
-		conf_data = PCI_EXPANSION_ROM_BAR;
-		break;
-	case PCI_CAPABILITY_LIST:
-		conf_data = PCI_CAPLIST_USB_POINTER;
-		break;
-	case PCI_INTERRUPT_LINE:
-		conf_data =
-		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
-		break;
-	case PCI_EHCI_LEGSMIEN_REG:
-		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-		conf_data = (hi & 0x003f0000) >> 16;
-		break;
-	case PCI_EHCI_LEGSMISTS_REG:
-		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-		conf_data = (hi & 0x3f000000) >> 24;
-		break;
-	case PCI_EHCI_FLADJ_REG:
-		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
-		conf_data = hi & 0x00003f00;
-		break;
-	default:
-		break;
-	}
-
-	return conf_data;
-}
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ide.c b/arch/mips/loongson64/common/cs5536/cs5536_ide.c
deleted file mode 100644
index bb933294b092..000000000000
--- a/arch/mips/loongson64/common/cs5536/cs5536_ide.c
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * the IDE Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_ide_write_reg(int reg, u32 value)
-{
-	u32 hi = 0, lo = value;
-
-	switch (reg) {
-	case PCI_COMMAND:
-		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
-		if (value & PCI_COMMAND_MASTER)
-			lo |= (0x03 << 4);
-		else
-			lo &= ~(0x03 << 4);
-		_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
-		break;
-	case PCI_STATUS:
-		if (value & PCI_STATUS_PARITY) {
-			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-			if (lo & SB_PARE_ERR_FLAG) {
-				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
-				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
-			}
-		}
-		break;
-	case PCI_CACHE_LINE_SIZE:
-		value &= 0x0000ff00;
-		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
-		hi &= 0xffffff00;
-		hi |= (value >> 8);
-		_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
-		break;
-	case PCI_BAR4_REG:
-		if (value == PCI_BAR_RANGE_MASK) {
-			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-			lo |= SOFT_BAR_IDE_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else if (value & 0x01) {
-			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
-			lo = (value & 0xfffffff0) | 0x1;
-			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
-
-			value &= 0xfffffffc;
-			hi = 0x60000000 | ((value & 0x000ff000) >> 12);
-			lo = 0x000ffff0 | ((value & 0x00000fff) << 20);
-			_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo);
-		}
-		break;
-	case PCI_IDE_CFG_REG:
-		if (value == CS5536_IDE_FLASH_SIGNATURE) {
-			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
-			lo |= 0x01;
-			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
-		} else {
-			_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
-			lo = value;
-			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
-		}
-		break;
-	case PCI_IDE_DTC_REG:
-		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
-		lo = value;
-		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
-		break;
-	case PCI_IDE_CAST_REG:
-		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
-		lo = value;
-		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
-		break;
-	case PCI_IDE_ETC_REG:
-		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
-		lo = value;
-		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
-		break;
-	case PCI_IDE_PM_REG:
-		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
-		lo = value;
-		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
-		break;
-	default:
-		break;
-	}
-}
-
-u32 pci_ide_read_reg(int reg)
-{
-	u32 conf_data = 0;
-	u32 hi, lo;
-
-	switch (reg) {
-	case PCI_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID);
-		break;
-	case PCI_COMMAND:
-		_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
-		if (lo & 0xfffffff0)
-			conf_data |= PCI_COMMAND_IO;
-		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
-		if ((lo & 0x30) == 0x30)
-			conf_data |= PCI_COMMAND_MASTER;
-		break;
-	case PCI_STATUS:
-		conf_data |= PCI_STATUS_66MHZ;
-		conf_data |= PCI_STATUS_FAST_BACK;
-		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-		if (lo & SB_PARE_ERR_FLAG)
-			conf_data |= PCI_STATUS_PARITY;
-		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
-		break;
-	case PCI_CLASS_REVISION:
-		_rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo);
-		conf_data = lo & 0x000000ff;
-		conf_data |= (CS5536_IDE_CLASS_CODE << 8);
-		break;
-	case PCI_CACHE_LINE_SIZE:
-		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
-		hi &= 0x000000f8;
-		conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi);
-		break;
-	case PCI_BAR4_REG:
-		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-		if (lo & SOFT_BAR_IDE_FLAG) {
-			conf_data = CS5536_IDE_RANGE |
-			    PCI_BASE_ADDRESS_SPACE_IO;
-			lo &= ~SOFT_BAR_IDE_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else {
-			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
-			conf_data = lo & 0xfffffff0;
-			conf_data |= 0x01;
-			conf_data &= ~0x02;
-		}
-		break;
-	case PCI_CARDBUS_CIS:
-		conf_data = PCI_CARDBUS_CIS_POINTER;
-		break;
-	case PCI_SUBSYSTEM_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID);
-		break;
-	case PCI_ROM_ADDRESS:
-		conf_data = PCI_EXPANSION_ROM_BAR;
-		break;
-	case PCI_CAPABILITY_LIST:
-		conf_data = PCI_CAPLIST_POINTER;
-		break;
-	case PCI_INTERRUPT_LINE:
-		conf_data =
-		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR);
-		break;
-	case PCI_IDE_CFG_REG:
-		_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
-		conf_data = lo;
-		break;
-	case PCI_IDE_DTC_REG:
-		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
-		conf_data = lo;
-		break;
-	case PCI_IDE_CAST_REG:
-		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
-		conf_data = lo;
-		break;
-	case PCI_IDE_ETC_REG:
-		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
-		conf_data = lo;
-		break;
-	case PCI_IDE_PM_REG:
-		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
-		conf_data = lo;
-		break;
-	default:
-		break;
-	}
-
-	return conf_data;
-}
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_isa.c b/arch/mips/loongson64/common/cs5536/cs5536_isa.c
deleted file mode 100644
index 5ad38f86ee62..000000000000
--- a/arch/mips/loongson64/common/cs5536/cs5536_isa.c
+++ /dev/null
@@ -1,326 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * the ISA Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-
-#include <linux/pci.h>
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-/* common variables for PCI_ISA_READ/WRITE_BAR */
-static const u32 divil_msr_reg[6] = {
-	DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
-	DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
-	DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
-};
-
-static const u32 soft_bar_flag[6] = {
-	SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
-	SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
-};
-
-static const u32 sb_msr_reg[6] = {
-	SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
-	SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
-};
-
-static const u32 bar_space_range[6] = {
-	CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
-	CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
-};
-
-static const int bar_space_len[6] = {
-	CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
-	CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
-};
-
-/*
- * enable the divil module bar space.
- *
- * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
- * and the RCONFx(0~5) reg to use the modules.
- */
-static void divil_lbar_enable(void)
-{
-	u32 hi, lo;
-	int offset;
-
-	/*
-	 * The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
-	 */
-
-	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
-		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
-		hi |= 0x01;
-		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
-	}
-}
-
-/*
- * disable the divil module bar space.
- */
-static void divil_lbar_disable(void)
-{
-	u32 hi, lo;
-	int offset;
-
-	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
-		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
-		hi &= ~0x01;
-		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
-	}
-}
-
-/*
- * BAR write: write value to the n BAR
- */
-
-void pci_isa_write_bar(int n, u32 value)
-{
-	u32 hi = 0, lo = value;
-
-	if (value == PCI_BAR_RANGE_MASK) {
-		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-		lo |= soft_bar_flag[n];
-		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-	} else if (value & 0x01) {
-		/* NATIVE reg */
-		hi = 0x0000f001;
-		lo &= bar_space_range[n];
-		_wrmsr(divil_msr_reg[n], hi, lo);
-
-		/* RCONFx is 4bytes in units for I/O space */
-		hi = ((value & 0x000ffffc) << 12) |
-		    ((bar_space_len[n] - 4) << 12) | 0x01;
-		lo = ((value & 0x000ffffc) << 12) | 0x01;
-		_wrmsr(sb_msr_reg[n], hi, lo);
-	}
-}
-
-/*
- * BAR read: read the n BAR
- */
-
-u32 pci_isa_read_bar(int n)
-{
-	u32 conf_data = 0;
-	u32 hi, lo;
-
-	_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-	if (lo & soft_bar_flag[n]) {
-		conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
-		lo &= ~soft_bar_flag[n];
-		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-	} else {
-		_rdmsr(divil_msr_reg[n], &hi, &lo);
-		conf_data = lo & bar_space_range[n];
-		conf_data |= 0x01;
-		conf_data &= ~0x02;
-	}
-	return conf_data;
-}
-
-/*
- * isa_write: ISA write transfer
- *
- * We assume that this is not a bus master transfer.
- */
-void pci_isa_write_reg(int reg, u32 value)
-{
-	u32 hi = 0, lo = value;
-	u32 temp;
-
-	switch (reg) {
-	case PCI_COMMAND:
-		if (value & PCI_COMMAND_IO)
-			divil_lbar_enable();
-		else
-			divil_lbar_disable();
-		break;
-	case PCI_STATUS:
-		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-		temp = lo & 0x0000ffff;
-		if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
-		    (lo & SB_TAS_ERR_EN))
-			temp |= SB_TAS_ERR_FLAG;
-
-		if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
-		    (lo & SB_TAR_ERR_EN))
-			temp |= SB_TAR_ERR_FLAG;
-
-		if ((value & PCI_STATUS_REC_MASTER_ABORT)
-		    && (lo & SB_MAR_ERR_EN))
-			temp |= SB_MAR_ERR_FLAG;
-
-		if ((value & PCI_STATUS_DETECTED_PARITY)
-		    && (lo & SB_PARE_ERR_EN))
-			temp |= SB_PARE_ERR_FLAG;
-
-		lo = temp;
-		_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
-		break;
-	case PCI_CACHE_LINE_SIZE:
-		value &= 0x0000ff00;
-		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
-		hi &= 0xffffff00;
-		hi |= (value >> 8);
-		_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
-		break;
-	case PCI_BAR0_REG:
-		pci_isa_write_bar(0, value);
-		break;
-	case PCI_BAR1_REG:
-		pci_isa_write_bar(1, value);
-		break;
-	case PCI_BAR2_REG:
-		pci_isa_write_bar(2, value);
-		break;
-	case PCI_BAR3_REG:
-		pci_isa_write_bar(3, value);
-		break;
-	case PCI_BAR4_REG:
-		pci_isa_write_bar(4, value);
-		break;
-	case PCI_BAR5_REG:
-		pci_isa_write_bar(5, value);
-		break;
-	case PCI_UART1_INT_REG:
-		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
-		/* disable uart1 interrupt in PIC */
-		lo &= ~(0xf << 24);
-		if (value)	/* enable uart1 interrupt in PIC */
-			lo |= (CS5536_UART1_INTR << 24);
-		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
-		break;
-	case PCI_UART2_INT_REG:
-		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
-		/* disable uart2 interrupt in PIC */
-		lo &= ~(0xf << 28);
-		if (value)	/* enable uart2 interrupt in PIC */
-			lo |= (CS5536_UART2_INTR << 28);
-		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
-		break;
-	case PCI_ISA_FIXUP_REG:
-		if (value) {
-			/* enable the TARGET ABORT/MASTER ABORT etc. */
-			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-			lo |= 0x00000063;
-			_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
-		}
-
-	default:
-		/* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
-		break;
-	}
-}
-
-/*
- * isa_read: ISA read transfers
- *
- * We assume that this is not a bus master transfer.
- */
-u32 pci_isa_read_reg(int reg)
-{
-	u32 conf_data = 0;
-	u32 hi, lo;
-
-	switch (reg) {
-	case PCI_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
-		break;
-	case PCI_COMMAND:
-		/* we just check the first LBAR for the IO enable bit, */
-		/* maybe we should changed later. */
-		_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
-		if (hi & 0x01)
-			conf_data |= PCI_COMMAND_IO;
-		break;
-	case PCI_STATUS:
-		conf_data |= PCI_STATUS_66MHZ;
-		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
-		conf_data |= PCI_STATUS_FAST_BACK;
-
-		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-		if (lo & SB_TAS_ERR_FLAG)
-			conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
-		if (lo & SB_TAR_ERR_FLAG)
-			conf_data |= PCI_STATUS_REC_TARGET_ABORT;
-		if (lo & SB_MAR_ERR_FLAG)
-			conf_data |= PCI_STATUS_REC_MASTER_ABORT;
-		if (lo & SB_PARE_ERR_FLAG)
-			conf_data |= PCI_STATUS_DETECTED_PARITY;
-		break;
-	case PCI_CLASS_REVISION:
-		_rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
-		conf_data = lo & 0x000000ff;
-		conf_data |= (CS5536_ISA_CLASS_CODE << 8);
-		break;
-	case PCI_CACHE_LINE_SIZE:
-		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
-		hi &= 0x000000f8;
-		conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
-		break;
-		/*
-		 * we only use the LBAR of DIVIL, no RCONF used.
-		 * all of them are IO space.
-		 */
-	case PCI_BAR0_REG:
-		return pci_isa_read_bar(0);
-		break;
-	case PCI_BAR1_REG:
-		return pci_isa_read_bar(1);
-		break;
-	case PCI_BAR2_REG:
-		return pci_isa_read_bar(2);
-		break;
-	case PCI_BAR3_REG:
-		break;
-	case PCI_BAR4_REG:
-		return pci_isa_read_bar(4);
-		break;
-	case PCI_BAR5_REG:
-		return pci_isa_read_bar(5);
-		break;
-	case PCI_CARDBUS_CIS:
-		conf_data = PCI_CARDBUS_CIS_POINTER;
-		break;
-	case PCI_SUBSYSTEM_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
-		break;
-	case PCI_ROM_ADDRESS:
-		conf_data = PCI_EXPANSION_ROM_BAR;
-		break;
-	case PCI_CAPABILITY_LIST:
-		conf_data = PCI_CAPLIST_POINTER;
-		break;
-	case PCI_INTERRUPT_LINE:
-		/* no interrupt used here */
-		conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
-		break;
-	default:
-		break;
-	}
-
-	return conf_data;
-}
-
-/*
- * The mfgpt timer interrupt is running early, so we must keep the south bridge
- * mmio always enabled. Otherwise we may race with the PCI configuration which
- * may temporarily disable it. When that happens and the timer interrupt fires,
- * we are not able to clear it and the system will hang.
- */
-static void cs5536_isa_mmio_always_on(struct pci_dev *dev)
-{
-	dev->mmio_always_on = 1;
-}
-DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
-	PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on);
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c
deleted file mode 100644
index 30af1b7c7529..000000000000
--- a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * CS5536 General timer functions
- *
- * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
- * Author: Yanhua, yanh@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu zhangjin, wuzhangjin@gmail.com
- *
- * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/jiffies.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-
-#include <asm/time.h>
-
-#include <cs5536/cs5536_mfgpt.h>
-
-static DEFINE_RAW_SPINLOCK(mfgpt_lock);
-
-static u32 mfgpt_base;
-
-/*
- * Initialize the MFGPT timer.
- *
- * This is also called after resume to bring the MFGPT into operation again.
- */
-
-/* disable counter */
-void disable_mfgpt0_counter(void)
-{
-	outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP);
-}
-EXPORT_SYMBOL(disable_mfgpt0_counter);
-
-/* enable counter, comparator2 to event mode, 14.318MHz clock */
-void enable_mfgpt0_counter(void)
-{
-	outw(0xe310, MFGPT0_SETUP);
-}
-EXPORT_SYMBOL(enable_mfgpt0_counter);
-
-static int mfgpt_timer_set_periodic(struct clock_event_device *evt)
-{
-	raw_spin_lock(&mfgpt_lock);
-
-	outw(COMPARE, MFGPT0_CMP2);	/* set comparator2 */
-	outw(0, MFGPT0_CNT);		/* set counter to 0 */
-	enable_mfgpt0_counter();
-
-	raw_spin_unlock(&mfgpt_lock);
-	return 0;
-}
-
-static int mfgpt_timer_shutdown(struct clock_event_device *evt)
-{
-	if (clockevent_state_periodic(evt) || clockevent_state_oneshot(evt)) {
-		raw_spin_lock(&mfgpt_lock);
-		disable_mfgpt0_counter();
-		raw_spin_unlock(&mfgpt_lock);
-	}
-
-	return 0;
-}
-
-static struct clock_event_device mfgpt_clockevent = {
-	.name = "mfgpt",
-	.features = CLOCK_EVT_FEAT_PERIODIC,
-
-	/* The oneshot mode have very high deviation, don't use it! */
-	.set_state_shutdown = mfgpt_timer_shutdown,
-	.set_state_periodic = mfgpt_timer_set_periodic,
-	.irq = CS5536_MFGPT_INTR,
-};
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	u32 basehi;
-
-	/*
-	 * get MFGPT base address
-	 *
-	 * NOTE: do not remove me, it's need for the value of mfgpt_base is
-	 * variable
-	 */
-	_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
-
-	/* ack */
-	outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP);
-
-	mfgpt_clockevent.event_handler(&mfgpt_clockevent);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq5 = {
-	.handler = timer_interrupt,
-	.flags = IRQF_NOBALANCING | IRQF_TIMER,
-	.name = "timer"
-};
-
-/*
- * Initialize the conversion factor and the min/max deltas of the clock event
- * structure and register the clock event source with the framework.
- */
-void __init setup_mfgpt0_timer(void)
-{
-	u32 basehi;
-	struct clock_event_device *cd = &mfgpt_clockevent;
-	unsigned int cpu = smp_processor_id();
-
-	cd->cpumask = cpumask_of(cpu);
-	clockevent_set_clock(cd, MFGPT_TICK_RATE);
-	cd->max_delta_ns = clockevent_delta2ns(0xffff, cd);
-	cd->max_delta_ticks = 0xffff;
-	cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
-	cd->min_delta_ticks = 0xf;
-
-	/* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */
-	_wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100);
-
-	/* Enable Interrupt Gate 5 */
-	_wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000);
-
-	/* get MFGPT base address */
-	_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
-
-	clockevents_register_device(cd);
-
-	setup_irq(CS5536_MFGPT_INTR, &irq5);
-}
-
-/*
- * Since the MFGPT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static u64 mfgpt_read(struct clocksource *cs)
-{
-	unsigned long flags;
-	int count;
-	u32 jifs;
-	static int old_count;
-	static u32 old_jifs;
-
-	raw_spin_lock_irqsave(&mfgpt_lock, flags);
-	/*
-	 * Although our caller may have the read side of xtime_lock,
-	 * this is now a seqlock, and we are cheating in this routine
-	 * by having side effects on state that we cannot undo if
-	 * there is a collision on the seqlock and our caller has to
-	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
-	 * jiffies as volatile despite the lock.  We read jiffies
-	 * before latching the timer count to guarantee that although
-	 * the jiffies value might be older than the count (that is,
-	 * the counter may underflow between the last point where
-	 * jiffies was incremented and the point where we latch the
-	 * count), it cannot be newer.
-	 */
-	jifs = jiffies;
-	/* read the count */
-	count = inw(MFGPT0_CNT);
-
-	/*
-	 * It's possible for count to appear to go the wrong way for this
-	 * reason:
-	 *
-	 *  The timer counter underflows, but we haven't handled the resulting
-	 *  interrupt and incremented jiffies yet.
-	 *
-	 * Previous attempts to handle these cases intelligently were buggy, so
-	 * we just do the simple thing now.
-	 */
-	if (count < old_count && jifs == old_jifs)
-		count = old_count;
-
-	old_count = count;
-	old_jifs = jifs;
-
-	raw_spin_unlock_irqrestore(&mfgpt_lock, flags);
-
-	return (u64) (jifs * COMPARE) + count;
-}
-
-static struct clocksource clocksource_mfgpt = {
-	.name = "mfgpt",
-	.rating = 120, /* Functional for real use, but not desired */
-	.read = mfgpt_read,
-	.mask = CLOCKSOURCE_MASK(32),
-};
-
-int __init init_mfgpt_clocksource(void)
-{
-	if (num_possible_cpus() > 1)	/* MFGPT does not scale! */
-		return 0;
-
-	return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
-}
-
-arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c
deleted file mode 100644
index 71a52b120317..000000000000
--- a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * the OHCI Virtual Support Module of AMD CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-
-#include <cs5536/cs5536.h>
-#include <cs5536/cs5536_pci.h>
-
-void pci_ohci_write_reg(int reg, u32 value)
-{
-	u32 hi = 0, lo = value;
-
-	switch (reg) {
-	case PCI_COMMAND:
-		_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
-		if (value & PCI_COMMAND_MASTER)
-			hi |= PCI_COMMAND_MASTER;
-		else
-			hi &= ~PCI_COMMAND_MASTER;
-
-		if (value & PCI_COMMAND_MEMORY)
-			hi |= PCI_COMMAND_MEMORY;
-		else
-			hi &= ~PCI_COMMAND_MEMORY;
-		_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
-		break;
-	case PCI_STATUS:
-		if (value & PCI_STATUS_PARITY) {
-			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-			if (lo & SB_PARE_ERR_FLAG) {
-				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
-				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
-			}
-		}
-		break;
-	case PCI_BAR0_REG:
-		if (value == PCI_BAR_RANGE_MASK) {
-			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-			lo |= SOFT_BAR_OHCI_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else if ((value & 0x01) == 0x00) {
-			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
-			lo = value;
-			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
-
-			value &= 0xfffffff0;
-			hi = 0x40000000 | ((value & 0xff000000) >> 24);
-			lo = 0x000fffff | ((value & 0x00fff000) << 8);
-			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo);
-		}
-		break;
-	case PCI_OHCI_INT_REG:
-		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
-		lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT);
-		if (value)	/* enable all the usb interrupt in PIC */
-			lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT);
-		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
-		break;
-	default:
-		break;
-	}
-}
-
-u32 pci_ohci_read_reg(int reg)
-{
-	u32 conf_data = 0;
-	u32 hi, lo;
-
-	switch (reg) {
-	case PCI_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID);
-		break;
-	case PCI_COMMAND:
-		_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
-		if (hi & PCI_COMMAND_MASTER)
-			conf_data |= PCI_COMMAND_MASTER;
-		if (hi & PCI_COMMAND_MEMORY)
-			conf_data |= PCI_COMMAND_MEMORY;
-		break;
-	case PCI_STATUS:
-		conf_data |= PCI_STATUS_66MHZ;
-		conf_data |= PCI_STATUS_FAST_BACK;
-		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
-		if (lo & SB_PARE_ERR_FLAG)
-			conf_data |= PCI_STATUS_PARITY;
-		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
-		break;
-	case PCI_CLASS_REVISION:
-		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
-		conf_data = lo & 0x000000ff;
-		conf_data |= (CS5536_OHCI_CLASS_CODE << 8);
-		break;
-	case PCI_CACHE_LINE_SIZE:
-		conf_data =
-		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
-					    PCI_NORMAL_LATENCY_TIMER);
-		break;
-	case PCI_BAR0_REG:
-		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
-		if (lo & SOFT_BAR_OHCI_FLAG) {
-			conf_data = CS5536_OHCI_RANGE |
-			    PCI_BASE_ADDRESS_SPACE_MEMORY;
-			lo &= ~SOFT_BAR_OHCI_FLAG;
-			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
-		} else {
-			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
-			conf_data = lo & 0xffffff00;
-			conf_data &= ~0x0000000f;	/* 32bit mem */
-		}
-		break;
-	case PCI_CARDBUS_CIS:
-		conf_data = PCI_CARDBUS_CIS_POINTER;
-		break;
-	case PCI_SUBSYSTEM_VENDOR_ID:
-		conf_data =
-		    CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
-		break;
-	case PCI_ROM_ADDRESS:
-		conf_data = PCI_EXPANSION_ROM_BAR;
-		break;
-	case PCI_CAPABILITY_LIST:
-		conf_data = PCI_CAPLIST_USB_POINTER;
-		break;
-	case PCI_INTERRUPT_LINE:
-		conf_data =
-		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
-		break;
-	case PCI_OHCI_INT_REG:
-		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
-		if (((lo >> PIC_YSEL_LOW_USB_SHIFT) & 0xf) == CS5536_USB_INTR)
-			conf_data = 1;
-		break;
-	default:
-		break;
-	}
-
-	return conf_data;
-}
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_pci.c b/arch/mips/loongson64/common/cs5536/cs5536_pci.c
deleted file mode 100644
index 202c89b568ba..000000000000
--- a/arch/mips/loongson64/common/cs5536/cs5536_pci.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * read/write operation to the PCI config space of CS5536
- *
- * Copyright (C) 2007 Lemote, Inc.
- * Author : jlliu, liujl@lemote.com
- *
- * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- *
- *	the Virtual Support Module(VSM) for virtulizing the PCI
- *	configure space are defined in cs5536_modulename.c respectively,
- *
- *	after this virtulizing, user can access the PCI configure space
- *	directly as a normal multi-function PCI device which follows
- *	the PCI-2.2 spec.
- */
-
-#include <linux/types.h>
-#include <cs5536/cs5536_pci.h>
-#include <cs5536/cs5536_vsm.h>
-
-enum {
-	CS5536_FUNC_START = -1,
-	CS5536_ISA_FUNC,
-	reserved_func,
-	CS5536_IDE_FUNC,
-	CS5536_ACC_FUNC,
-	CS5536_OHCI_FUNC,
-	CS5536_EHCI_FUNC,
-	CS5536_FUNC_END,
-};
-
-static const cs5536_pci_vsm_write vsm_conf_write[] = {
-	[CS5536_ISA_FUNC]	= pci_isa_write_reg,
-	[reserved_func]		= NULL,
-	[CS5536_IDE_FUNC]	= pci_ide_write_reg,
-	[CS5536_ACC_FUNC]	= pci_acc_write_reg,
-	[CS5536_OHCI_FUNC]	= pci_ohci_write_reg,
-	[CS5536_EHCI_FUNC]	= pci_ehci_write_reg,
-};
-
-static const cs5536_pci_vsm_read vsm_conf_read[] = {
-	[CS5536_ISA_FUNC]	= pci_isa_read_reg,
-	[reserved_func]		= NULL,
-	[CS5536_IDE_FUNC]	= pci_ide_read_reg,
-	[CS5536_ACC_FUNC]	= pci_acc_read_reg,
-	[CS5536_OHCI_FUNC]	= pci_ohci_read_reg,
-	[CS5536_EHCI_FUNC]	= pci_ehci_read_reg,
-};
-
-/*
- * write to PCI config space and transfer it to MSR write.
- */
-void cs5536_pci_conf_write4(int function, int reg, u32 value)
-{
-	if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
-		return;
-	if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0))
-		return;
-
-	if (vsm_conf_write[function] != NULL)
-		vsm_conf_write[function](reg, value);
-}
-
-/*
- * read PCI config space and transfer it to MSR access.
- */
-u32 cs5536_pci_conf_read4(int function, int reg)
-{
-	u32 data = 0;
-
-	if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
-		return 0;
-	if ((reg < 0) || ((reg & 0x03) != 0))
-		return 0;
-	if (reg > 0x100)
-		return 0xffffffff;
-
-	if (vsm_conf_read[function] != NULL)
-		data = vsm_conf_read[function](reg);
-
-	return data;
-}
diff --git a/arch/mips/loongson64/fuloong-2e/Makefile b/arch/mips/loongson64/fuloong-2e/Makefile
deleted file mode 100644
index bb58edb3bea7..000000000000
--- a/arch/mips/loongson64/fuloong-2e/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for Lemote Fuloong2e mini-PC board.
-#
-
-obj-y += irq.o reset.o dma.o
diff --git a/arch/mips/loongson64/fuloong-2e/dma.c b/arch/mips/loongson64/fuloong-2e/dma.c
deleted file mode 100644
index e122292bf666..000000000000
--- a/arch/mips/loongson64/fuloong-2e/dma.c
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/dma-direct.h>
-
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return paddr | 0x80000000;
-}
-
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	return dma_addr & 0x7fffffff;
-}
diff --git a/arch/mips/loongson64/fuloong-2e/irq.c b/arch/mips/loongson64/fuloong-2e/irq.c
deleted file mode 100644
index 32278e7bf85c..000000000000
--- a/arch/mips/loongson64/fuloong-2e/irq.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- */
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-
-#include <loongson.h>
-
-static void i8259_irqdispatch(void)
-{
-	int irq;
-
-	irq = i8259_irq();
-	if (irq >= 0)
-		do_IRQ(irq);
-	else
-		spurious_interrupt();
-}
-
-asmlinkage void mach_irq_dispatch(unsigned int pending)
-{
-	if (pending & CAUSEF_IP7)
-		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
-		do_perfcnt_IRQ();
-	else if (pending & CAUSEF_IP5)
-		i8259_irqdispatch();
-	else if (pending & CAUSEF_IP2)
-		bonito_irqdispatch();
-	else
-		spurious_interrupt();
-}
-
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
-};
-
-void __init mach_init_irq(void)
-{
-	/* init all controller
-	 *   0-15	  ------> i8259 interrupt
-	 *   16-23	  ------> mips cpu interrupt
-	 *   32-63	  ------> bonito irq
-	 */
-
-	/* most bonito irq should be level triggered */
-	LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
-	    LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
-
-	/* Sets the first-level interrupt dispatcher. */
-	mips_cpu_irq_init();
-	init_i8259_irqs();
-	bonito_irq_init();
-
-	/* bonito irq at IP2 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
-	/* 8259 irq at IP5 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
-}
diff --git a/arch/mips/loongson64/fuloong-2e/reset.c b/arch/mips/loongson64/fuloong-2e/reset.c
deleted file mode 100644
index 8273de1cf4bb..000000000000
--- a/arch/mips/loongson64/fuloong-2e/reset.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* Board-specific reboot/shutdown routines
- * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-
-#include <loongson.h>
-
-void mach_prepare_reboot(void)
-{
-	LOONGSON_GENCFG &= ~(1 << 2);
-	LOONGSON_GENCFG |= (1 << 2);
-}
-
-void mach_prepare_shutdown(void)
-{
-}
diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile
deleted file mode 100644
index 881a0ec06d1f..000000000000
--- a/arch/mips/loongson64/lemote-2f/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for lemote loongson2f family machines
-#
-
-obj-y += clock.o machtype.o irq.o reset.o dma.o ec_kb3310b.o
-
-#
-# Suspend Support
-#
-
-obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/mips/loongson64/lemote-2f/clock.c b/arch/mips/loongson64/lemote-2f/clock.c
deleted file mode 100644
index 8281334df9c8..000000000000
--- a/arch/mips/loongson64/lemote-2f/clock.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) 2006 - 2008 Lemote Inc. & Institute of Computing Technology
- * Author: Yanhua, yanh@lemote.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-
-#include <asm/clock.h>
-#include <asm/mach-loongson64/loongson.h>
-
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-/* Minimum CLK support */
-enum {
-	DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT,
-	DC_87PT, DC_DISABLE, DC_RESV
-};
-
-struct cpufreq_frequency_table loongson2_clockmod_table[] = {
-	{0, DC_RESV, CPUFREQ_ENTRY_INVALID},
-	{0, DC_ZERO, CPUFREQ_ENTRY_INVALID},
-	{0, DC_25PT, 0},
-	{0, DC_37PT, 0},
-	{0, DC_50PT, 0},
-	{0, DC_62PT, 0},
-	{0, DC_75PT, 0},
-	{0, DC_87PT, 0},
-	{0, DC_DISABLE, 0},
-	{0, DC_RESV, CPUFREQ_TABLE_END},
-};
-EXPORT_SYMBOL_GPL(loongson2_clockmod_table);
-
-static struct clk cpu_clk = {
-	.name = "cpu_clk",
-	.flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-	.rate = 800000000,
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return &cpu_clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-static void propagate_rate(struct clk *clk)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &clock_list, node) {
-		if (likely(clkp->parent != clk))
-			continue;
-		if (likely(clkp->ops && clkp->ops->recalc))
-			clkp->ops->recalc(clkp);
-		if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
-			propagate_rate(clkp);
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (!clk)
-		return 0;
-
-	return (unsigned long)clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int rate_khz = rate / 1000;
-	struct cpufreq_frequency_table *pos;
-	int ret = 0;
-	int regval;
-
-	if (likely(clk->ops && clk->ops->set_rate)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&clock_lock, flags);
-		ret = clk->ops->set_rate(clk, rate, 0);
-		spin_unlock_irqrestore(&clock_lock, flags);
-	}
-
-	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
-		propagate_rate(clk);
-
-	cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
-		if (rate_khz == pos->frequency)
-			break;
-	if (rate_khz != pos->frequency)
-		return -ENOTSUPP;
-
-	clk->rate = rate;
-
-	regval = LOONGSON_CHIPCFG(0);
-	regval = (regval & ~0x7) | (pos->driver_data - 1);
-	LOONGSON_CHIPCFG(0) = regval;
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (likely(clk->ops && clk->ops->round_rate)) {
-		unsigned long flags, rounded;
-
-		spin_lock_irqsave(&clock_lock, flags);
-		rounded = clk->ops->round_rate(clk, rate);
-		spin_unlock_irqrestore(&clock_lock, flags);
-
-		return rounded;
-	}
-
-	return rate;
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
diff --git a/arch/mips/loongson64/lemote-2f/dma.c b/arch/mips/loongson64/lemote-2f/dma.c
deleted file mode 100644
index abf0e39d7e46..000000000000
--- a/arch/mips/loongson64/lemote-2f/dma.c
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/dma-direct.h>
-
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return paddr | 0x80000000;
-}
-
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	if (dma_addr > 0x8fffffff)
-		return dma_addr;
-	return dma_addr & 0x0fffffff;
-}
diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
deleted file mode 100644
index d138220e96a2..000000000000
--- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook
- *
- *  Copyright (C) 2008 Lemote Inc.
- *  Author: liujl <liujl@lemote.com>, 2008-04-20
- */
-
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-#include "ec_kb3310b.h"
-
-static DEFINE_SPINLOCK(index_access_lock);
-static DEFINE_SPINLOCK(port_access_lock);
-
-unsigned char ec_read(unsigned short addr)
-{
-	unsigned char value;
-	unsigned long flags;
-
-	spin_lock_irqsave(&index_access_lock, flags);
-	outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
-	outb((addr & 0x00ff), EC_IO_PORT_LOW);
-	value = inb(EC_IO_PORT_DATA);
-	spin_unlock_irqrestore(&index_access_lock, flags);
-
-	return value;
-}
-EXPORT_SYMBOL_GPL(ec_read);
-
-void ec_write(unsigned short addr, unsigned char val)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&index_access_lock, flags);
-	outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
-	outb((addr & 0x00ff), EC_IO_PORT_LOW);
-	outb(val, EC_IO_PORT_DATA);
-	/*  flush the write action */
-	inb(EC_IO_PORT_DATA);
-	spin_unlock_irqrestore(&index_access_lock, flags);
-}
-EXPORT_SYMBOL_GPL(ec_write);
-
-/*
- * This function is used for EC command writes and corresponding status queries.
- */
-int ec_query_seq(unsigned char cmd)
-{
-	int timeout;
-	unsigned char status;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&port_access_lock, flags);
-
-	/* make chip goto reset mode */
-	udelay(EC_REG_DELAY);
-	outb(cmd, EC_CMD_PORT);
-	udelay(EC_REG_DELAY);
-
-	/* check if the command is received by ec */
-	timeout = EC_CMD_TIMEOUT;
-	status = inb(EC_STS_PORT);
-	while (timeout-- && (status & (1 << 1))) {
-		status = inb(EC_STS_PORT);
-		udelay(EC_REG_DELAY);
-	}
-
-	spin_unlock_irqrestore(&port_access_lock, flags);
-
-	if (timeout <= 0) {
-		printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
-		ret = -EINVAL;
-	} else
-		printk(KERN_INFO
-			   "(%x/%d)ec issued command %d status : 0x%x\n",
-			   timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ec_query_seq);
-
-/*
- * Send query command to EC to get the proper event number
- */
-int ec_query_event_num(void)
-{
-	return ec_query_seq(CMD_GET_EVENT_NUM);
-}
-EXPORT_SYMBOL(ec_query_event_num);
-
-/*
- * Get event number from EC
- *
- * NOTE: This routine must follow the query_event_num function in the
- * interrupt.
- */
-int ec_get_event_num(void)
-{
-	int timeout = 100;
-	unsigned char value;
-	unsigned char status;
-
-	udelay(EC_REG_DELAY);
-	status = inb(EC_STS_PORT);
-	udelay(EC_REG_DELAY);
-	while (timeout-- && !(status & (1 << 0))) {
-		status = inb(EC_STS_PORT);
-		udelay(EC_REG_DELAY);
-	}
-	if (timeout <= 0) {
-		pr_info("%s: get event number timeout.\n", __func__);
-
-		return -EINVAL;
-	}
-	value = inb(EC_DAT_PORT);
-	udelay(EC_REG_DELAY);
-
-	return value;
-}
-EXPORT_SYMBOL(ec_get_event_num);
diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
deleted file mode 100644
index aecdbc9c875a..000000000000
--- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * KB3310B Embedded Controller
- *
- *  Copyright (C) 2008 Lemote Inc.
- *  Author: liujl <liujl@lemote.com>, 2008-03-14
- */
-
-#ifndef _EC_KB3310B_H
-#define _EC_KB3310B_H
-
-extern unsigned char ec_read(unsigned short addr);
-extern void ec_write(unsigned short addr, unsigned char val);
-extern int ec_query_seq(unsigned char cmd);
-extern int ec_query_event_num(void);
-extern int ec_get_event_num(void);
-
-typedef int (*sci_handler) (int status);
-extern sci_handler yeeloong_report_lid_status;
-
-#define SCI_IRQ_NUM 0x0A
-
-/*
- * The following registers are determined by the EC index configuration.
- * 1, fill the PORT_HIGH as EC register high part.
- * 2, fill the PORT_LOW as EC register low part.
- * 3, fill the PORT_DATA as EC register write data or get the data from it.
- */
-#define EC_IO_PORT_HIGH 0x0381
-#define EC_IO_PORT_LOW	0x0382
-#define EC_IO_PORT_DATA 0x0383
-
-/*
- * EC delay time is 500us for register and status access
- */
-#define EC_REG_DELAY	500	/* unit : us */
-#define EC_CMD_TIMEOUT	0x1000
-
-/*
- * EC access port for SCI communication
- */
-#define EC_CMD_PORT		0x66
-#define EC_STS_PORT		0x66
-#define EC_DAT_PORT		0x62
-#define CMD_INIT_IDLE_MODE	0xdd
-#define CMD_EXIT_IDLE_MODE	0xdf
-#define CMD_INIT_RESET_MODE	0xd8
-#define CMD_REBOOT_SYSTEM	0x8c
-#define CMD_GET_EVENT_NUM	0x84
-#define CMD_PROGRAM_PIECE	0xda
-
-/* temperature & fan registers */
-#define REG_TEMPERATURE_VALUE	0xF458
-#define REG_FAN_AUTO_MAN_SWITCH 0xF459
-#define BIT_FAN_AUTO		0
-#define BIT_FAN_MANUAL		1
-#define REG_FAN_CONTROL		0xF4D2
-#define BIT_FAN_CONTROL_ON	(1 << 0)
-#define BIT_FAN_CONTROL_OFF	(0 << 0)
-#define REG_FAN_STATUS		0xF4DA
-#define BIT_FAN_STATUS_ON	(1 << 0)
-#define BIT_FAN_STATUS_OFF	(0 << 0)
-#define REG_FAN_SPEED_HIGH	0xFE22
-#define REG_FAN_SPEED_LOW	0xFE23
-#define REG_FAN_SPEED_LEVEL	0xF4CC
-/* fan speed divider */
-#define FAN_SPEED_DIVIDER	480000	/* (60*1000*1000/62.5/2)*/
-
-/* battery registers */
-#define REG_BAT_DESIGN_CAP_HIGH		0xF77D
-#define REG_BAT_DESIGN_CAP_LOW		0xF77E
-#define REG_BAT_FULLCHG_CAP_HIGH	0xF780
-#define REG_BAT_FULLCHG_CAP_LOW		0xF781
-#define REG_BAT_DESIGN_VOL_HIGH		0xF782
-#define REG_BAT_DESIGN_VOL_LOW		0xF783
-#define REG_BAT_CURRENT_HIGH		0xF784
-#define REG_BAT_CURRENT_LOW		0xF785
-#define REG_BAT_VOLTAGE_HIGH		0xF786
-#define REG_BAT_VOLTAGE_LOW		0xF787
-#define REG_BAT_TEMPERATURE_HIGH	0xF788
-#define REG_BAT_TEMPERATURE_LOW		0xF789
-#define REG_BAT_RELATIVE_CAP_HIGH	0xF492
-#define REG_BAT_RELATIVE_CAP_LOW	0xF493
-#define REG_BAT_VENDOR			0xF4C4
-#define FLAG_BAT_VENDOR_SANYO		0x01
-#define FLAG_BAT_VENDOR_SIMPLO		0x02
-#define REG_BAT_CELL_COUNT		0xF4C6
-#define FLAG_BAT_CELL_3S1P		0x03
-#define FLAG_BAT_CELL_3S2P		0x06
-#define REG_BAT_CHARGE			0xF4A2
-#define FLAG_BAT_CHARGE_DISCHARGE	0x01
-#define FLAG_BAT_CHARGE_CHARGE		0x02
-#define FLAG_BAT_CHARGE_ACPOWER		0x00
-#define REG_BAT_STATUS			0xF4B0
-#define BIT_BAT_STATUS_LOW		(1 << 5)
-#define BIT_BAT_STATUS_DESTROY		(1 << 2)
-#define BIT_BAT_STATUS_FULL		(1 << 1)
-#define BIT_BAT_STATUS_IN		(1 << 0)
-#define REG_BAT_CHARGE_STATUS		0xF4B1
-#define BIT_BAT_CHARGE_STATUS_OVERTEMP	(1 << 2)
-#define BIT_BAT_CHARGE_STATUS_PRECHG	(1 << 1)
-#define REG_BAT_STATE			0xF482
-#define BIT_BAT_STATE_CHARGING		(1 << 1)
-#define BIT_BAT_STATE_DISCHARGING	(1 << 0)
-#define REG_BAT_POWER			0xF440
-#define BIT_BAT_POWER_S3		(1 << 2)
-#define BIT_BAT_POWER_ON		(1 << 1)
-#define BIT_BAT_POWER_ACIN		(1 << 0)
-
-/* other registers */
-/* Audio: rd/wr */
-#define REG_AUDIO_VOLUME	0xF46C
-#define REG_AUDIO_MUTE		0xF4E7
-#define REG_AUDIO_BEEP		0xF4D0
-/* USB port power or not: rd/wr */
-#define REG_USB0_FLAG		0xF461
-#define REG_USB1_FLAG		0xF462
-#define REG_USB2_FLAG		0xF463
-#define BIT_USB_FLAG_ON		1
-#define BIT_USB_FLAG_OFF	0
-/* LID */
-#define REG_LID_DETECT		0xF4BD
-#define BIT_LID_DETECT_ON	1
-#define BIT_LID_DETECT_OFF	0
-/* CRT */
-#define REG_CRT_DETECT		0xF4AD
-#define BIT_CRT_DETECT_PLUG	1
-#define BIT_CRT_DETECT_UNPLUG	0
-/* LCD backlight brightness adjust: 9 levels */
-#define REG_DISPLAY_BRIGHTNESS	0xF4F5
-/* Black screen Status */
-#define BIT_DISPLAY_LCD_ON	1
-#define BIT_DISPLAY_LCD_OFF	0
-/* LCD backlight control: off/restore */
-#define REG_BACKLIGHT_CTRL	0xF7BD
-#define BIT_BACKLIGHT_ON	1
-#define BIT_BACKLIGHT_OFF	0
-/* Reset the machine auto-clear: rd/wr */
-#define REG_RESET		0xF4EC
-#define BIT_RESET_ON		1
-/* Light the led: rd/wr */
-#define REG_LED			0xF4C8
-#define BIT_LED_RED_POWER	(1 << 0)
-#define BIT_LED_ORANGE_POWER	(1 << 1)
-#define BIT_LED_GREEN_CHARGE	(1 << 2)
-#define BIT_LED_RED_CHARGE	(1 << 3)
-#define BIT_LED_NUMLOCK		(1 << 4)
-/* Test led mode, all led on/off */
-#define REG_LED_TEST		0xF4C2
-#define BIT_LED_TEST_IN		1
-#define BIT_LED_TEST_OUT	0
-/* Camera on/off */
-#define REG_CAMERA_STATUS	0xF46A
-#define BIT_CAMERA_STATUS_ON	1
-#define BIT_CAMERA_STATUS_OFF	0
-#define REG_CAMERA_CONTROL	0xF7B7
-#define BIT_CAMERA_CONTROL_OFF	0
-#define BIT_CAMERA_CONTROL_ON	1
-/* Wlan Status */
-#define REG_WLAN		0xF4FA
-#define BIT_WLAN_ON		1
-#define BIT_WLAN_OFF		0
-#define REG_DISPLAY_LCD		0xF79F
-
-/* SCI Event Number from EC */
-enum {
-	EVENT_LID = 0x23,	/*  LID open/close */
-	EVENT_DISPLAY_TOGGLE,	/*  Fn+F3 for display switch */
-	EVENT_SLEEP,		/*  Fn+F1 for entering sleep mode */
-	EVENT_OVERTEMP,		/*  Over-temperature happened */
-	EVENT_CRT_DETECT,	/*  CRT is connected */
-	EVENT_CAMERA,		/*  Camera on/off */
-	EVENT_USB_OC2,		/*  USB2 Over Current occurred */
-	EVENT_USB_OC0,		/*  USB0 Over Current occurred */
-	EVENT_BLACK_SCREEN,	/*  Turn on/off backlight */
-	EVENT_AUDIO_MUTE,	/*  Mute on/off */
-	EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
-	EVENT_AC_BAT,		/*  AC & Battery relative issue */
-	EVENT_AUDIO_VOLUME,	/*  Volume adjust */
-	EVENT_WLAN,		/*  Wlan on/off */
-	EVENT_END
-};
-
-#endif /* !_EC_KB3310B_H */
diff --git a/arch/mips/loongson64/lemote-2f/irq.c b/arch/mips/loongson64/lemote-2f/irq.c
deleted file mode 100644
index c58a044c6c07..000000000000
--- a/arch/mips/loongson64/lemote-2f/irq.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2007 Lemote Inc.
- * Author: Fuxin Zhang, zhangfx@lemote.com
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-
-#include <loongson.h>
-#include <machine.h>
-
-#define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
-#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* bonito */
-#define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
-#define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2) /* i8259 */
-
-#define LOONGSON_INT_BIT_INT0		(1 << 11)
-#define LOONGSON_INT_BIT_INT1		(1 << 12)
-
-/*
- * The generic i8259_irq() make the kernel hang on booting.  Since we cannot
- * get the irq via the IRR directly, we access the ISR instead.
- */
-int mach_i8259_irq(void)
-{
-	int irq, isr;
-
-	irq = -1;
-
-	if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
-		raw_spin_lock(&i8259A_lock);
-		isr = inb(PIC_MASTER_CMD) &
-			~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
-		if (!isr)
-			isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8;
-		irq = ffs(isr) - 1;
-		if (unlikely(irq == 7)) {
-			/*
-			 * This may be a spurious interrupt.
-			 *
-			 * Read the interrupt status register (ISR). If the most
-			 * significant bit is not set then there is no valid
-			 * interrupt.
-			 */
-			outb(0x0B, PIC_MASTER_ISR);	/* ISR register */
-			if (~inb(PIC_MASTER_ISR) & 0x80)
-				irq = -1;
-		}
-		raw_spin_unlock(&i8259A_lock);
-	}
-
-	return irq;
-}
-EXPORT_SYMBOL(mach_i8259_irq);
-
-static void i8259_irqdispatch(void)
-{
-	int irq;
-
-	irq = mach_i8259_irq();
-	if (irq >= 0)
-		do_IRQ(irq);
-	else
-		spurious_interrupt();
-}
-
-void mach_irq_dispatch(unsigned int pending)
-{
-	if (pending & CAUSEF_IP7)
-		do_IRQ(LOONGSON_TIMER_IRQ);
-	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
-		do_perfcnt_IRQ();
-		bonito_irqdispatch();
-	} else if (pending & CAUSEF_IP3)	/* CPU UART */
-		do_IRQ(LOONGSON_UART_IRQ);
-	else if (pending & CAUSEF_IP2)	/* South Bridge */
-		i8259_irqdispatch();
-	else
-		spurious_interrupt();
-}
-
-static irqreturn_t ip6_action(int cpl, void *dev_id)
-{
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ip6_irqaction = {
-	.handler = ip6_action,
-	.name = "cascade",
-	.flags = IRQF_SHARED | IRQF_NO_THREAD,
-};
-
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND,
-};
-
-void __init mach_init_irq(void)
-{
-	/* init all controller
-	 *   0-15	  ------> i8259 interrupt
-	 *   16-23	  ------> mips cpu interrupt
-	 *   32-63	  ------> bonito irq
-	 */
-
-	/* setup cs5536 as high level trigger */
-	LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
-	LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
-
-	/* Sets the first-level interrupt dispatcher. */
-	mips_cpu_irq_init();
-	init_i8259_irqs();
-	bonito_irq_init();
-
-	/* setup north bridge irq (bonito) */
-	setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
-	/* setup source bridge irq (i8259) */
-	setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
-}
diff --git a/arch/mips/loongson64/lemote-2f/machtype.c b/arch/mips/loongson64/lemote-2f/machtype.c
deleted file mode 100644
index 9462a3ab57be..000000000000
--- a/arch/mips/loongson64/lemote-2f/machtype.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-void __init mach_prom_init_machtype(void)
-{
-	/* We share the same kernel image file among Lemote 2F family
-	 * of machines, and provide the machtype= kernel command line
-	 * to users to indicate their machine, this command line will
-	 * be passed by the latest PMON automatically. and fortunately,
-	 * up to now, we can get the machine type from the PMON_VER=
-	 * commandline directly except the NAS machine, In the old
-	 * machines, this will help the users a lot.
-	 *
-	 * If no "machtype=" passed, get machine type from "PMON_VER=".
-	 *	PMON_VER=LM8089		Lemote 8.9'' netbook
-	 *		 LM8101		Lemote 10.1'' netbook
-	 *	(The above two netbooks have the same kernel support)
-	 *		 LM6XXX		Lemote FuLoong(2F) box series
-	 *		 LM9XXX		Lemote LynLoong PC series
-	 */
-	if (strstr(arcs_cmdline, "PMON_VER=LM")) {
-		if (strstr(arcs_cmdline, "PMON_VER=LM8"))
-			mips_machtype = MACH_LEMOTE_YL2F89;
-		else if (strstr(arcs_cmdline, "PMON_VER=LM6"))
-			mips_machtype = MACH_LEMOTE_FL2F;
-		else if (strstr(arcs_cmdline, "PMON_VER=LM9"))
-			mips_machtype = MACH_LEMOTE_LL2F;
-		else
-			mips_machtype = MACH_LEMOTE_NAS;
-
-		strcat(arcs_cmdline, " machtype=");
-		strcat(arcs_cmdline, get_system_type());
-		strcat(arcs_cmdline, " ");
-	}
-}
diff --git a/arch/mips/loongson64/lemote-2f/pm.c b/arch/mips/loongson64/lemote-2f/pm.c
deleted file mode 100644
index 3d0027229e3c..000000000000
--- a/arch/mips/loongson64/lemote-2f/pm.c
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Lemote loongson2f family machines' specific suspend support
- *
- *  Copyright (C) 2009 Lemote Inc.
- *  Author: Wu Zhangjin <wuzhangjin@gmail.com>
- */
-
-#include <linux/suspend.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/i8042.h>
-#include <linux/export.h>
-
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-#include <cs5536/cs5536_mfgpt.h>
-#include "ec_kb3310b.h"
-
-#define I8042_KBD_IRQ		1
-#define I8042_CTR_KBDINT	0x01
-#define I8042_CTR_KBDDIS	0x10
-
-static unsigned char i8042_ctr;
-
-static int i8042_enable_kbd_port(void)
-{
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
-		pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port."
-		       "\n");
-		return -EIO;
-	}
-
-	i8042_ctr &= ~I8042_CTR_KBDDIS;
-	i8042_ctr |= I8042_CTR_KBDINT;
-
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		i8042_ctr &= ~I8042_CTR_KBDINT;
-		i8042_ctr |= I8042_CTR_KBDDIS;
-		pr_err("i8042.c: Failed to enable KBD port.\n");
-
-		return -EIO;
-	}
-
-	return 0;
-}
-
-void setup_wakeup_events(void)
-{
-	int irq_mask;
-
-	switch (mips_machtype) {
-	case MACH_LEMOTE_ML2F7:
-	case MACH_LEMOTE_YL2F89:
-		/* open the keyboard irq in i8259A */
-		outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR);
-		irq_mask = inb(PIC_MASTER_IMR);
-
-		/* enable keyboard port */
-		i8042_enable_kbd_port();
-
-		/* Wakeup CPU via SCI lid open event */
-		outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR);
-		inb(PIC_MASTER_IMR);
-		outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR);
-		inb(PIC_SLAVE_IMR);
-
-		break;
-
-	default:
-		break;
-	}
-}
-
-static struct delayed_work lid_task;
-static int initialized;
-/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */
-sci_handler yeeloong_report_lid_status;
-EXPORT_SYMBOL(yeeloong_report_lid_status);
-static void yeeloong_lid_update_task(struct work_struct *work)
-{
-	if (yeeloong_report_lid_status)
-		yeeloong_report_lid_status(BIT_LID_DETECT_ON);
-}
-
-int wakeup_loongson(void)
-{
-	int irq;
-
-	/* query the interrupt number */
-	irq = mach_i8259_irq();
-	if (irq < 0)
-		return 0;
-
-	printk(KERN_INFO "%s: irq = %d\n", __func__, irq);
-
-	if (irq == I8042_KBD_IRQ)
-		return 1;
-	else if (irq == SCI_IRQ_NUM) {
-		int ret, sci_event;
-		/* query the event number */
-		ret = ec_query_seq(CMD_GET_EVENT_NUM);
-		if (ret < 0)
-			return 0;
-		sci_event = ec_get_event_num();
-		if (sci_event < 0)
-			return 0;
-		if (sci_event == EVENT_LID) {
-			int lid_status;
-			/* check the LID status */
-			lid_status = ec_read(REG_LID_DETECT);
-			/* wakeup cpu when people open the LID */
-			if (lid_status == BIT_LID_DETECT_ON) {
-				/* If we call it directly here, the WARNING
-				 * will be sent out by getnstimeofday
-				 * via "WARN_ON(timekeeping_suspended);"
-				 * because we can not schedule in suspend mode.
-				 */
-				if (initialized == 0) {
-					INIT_DELAYED_WORK(&lid_task,
-						yeeloong_lid_update_task);
-					initialized = 1;
-				}
-				schedule_delayed_work(&lid_task, 1);
-				return 1;
-			}
-		}
-	}
-
-	return 0;
-}
-
-void __weak mach_suspend(void)
-{
-	disable_mfgpt0_counter();
-}
-
-void __weak mach_resume(void)
-{
-	enable_mfgpt0_counter();
-}
diff --git a/arch/mips/loongson64/lemote-2f/reset.c b/arch/mips/loongson64/lemote-2f/reset.c
deleted file mode 100644
index 0db0934302ea..000000000000
--- a/arch/mips/loongson64/lemote-2f/reset.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* Board-specific reboot/shutdown routines
- *
- * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-#include <cs5536/cs5536.h>
-#include "ec_kb3310b.h"
-
-static void reset_cpu(void)
-{
-	/*
-	 * reset cpu to full speed, this is needed when enabling cpu frequency
-	 * scalling
-	 */
-	LOONGSON_CHIPCFG(0) |= 0x7;
-}
-
-/* reset support for fuloong2f */
-
-static void fl2f_reboot(void)
-{
-	reset_cpu();
-
-	/* send a reset signal to south bridge.
-	 *
-	 * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset
-	 * normally with this reset operation and it will not work in PMON, but
-	 * you can type halt command and then reboot, seems the hardware reset
-	 * logic not work normally.
-	 */
-	{
-		u32 hi, lo;
-		_rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo);
-		lo |= 0x00000001;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo);
-	}
-}
-
-static void fl2f_shutdown(void)
-{
-	u32 hi, lo, val;
-	int gpio_base;
-
-	/* get gpio base */
-	_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
-	gpio_base = lo & 0xff00;
-
-	/* make cs5536 gpio13 output enable */
-	val = inl(gpio_base + GPIOL_OUT_EN);
-	val &= ~(1 << (16 + 13));
-	val |= (1 << 13);
-	outl(val, gpio_base + GPIOL_OUT_EN);
-	mmiowb();
-	/* make cs5536 gpio13 output low level voltage. */
-	val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13));
-	val |= (1 << (16 + 13));
-	outl(val, gpio_base + GPIOL_OUT_VAL);
-	mmiowb();
-}
-
-/* reset support for yeeloong2f and mengloong2f notebook */
-
-static void ml2f_reboot(void)
-{
-	reset_cpu();
-
-	/* sending an reset signal to EC(embedded controller) */
-	ec_write(REG_RESET, BIT_RESET_ON);
-}
-
-#define yl2f89_reboot ml2f_reboot
-
-/* menglong(7inches) laptop has different shutdown logic from 8.9inches */
-#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d
-#define EC_SHUTDOWN_IO_PORT_LOW	 0xff2e
-#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f
-#define REG_SHUTDOWN_HIGH	 0xFC
-#define REG_SHUTDOWN_LOW	 0x29
-#define BIT_SHUTDOWN_ON		 (1 << 1)
-
-static void ml2f_shutdown(void)
-{
-	u8 val;
-	u64 i;
-
-	outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH);
-	outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW);
-	mmiowb();
-	val = inb(EC_SHUTDOWN_IO_PORT_DATA);
-	outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA);
-	mmiowb();
-	/* need enough wait here... how many microseconds needs? */
-	for (i = 0; i < 0x10000; i++)
-		delay();
-	outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA);
-	mmiowb();
-}
-
-static void yl2f89_shutdown(void)
-{
-	/* cpu-gpio0 output low */
-	LOONGSON_GPIODATA &= ~0x00000001;
-	/* cpu-gpio0 as output */
-	LOONGSON_GPIOIE &= ~0x00000001;
-}
-
-void mach_prepare_reboot(void)
-{
-	switch (mips_machtype) {
-	case MACH_LEMOTE_FL2F:
-	case MACH_LEMOTE_NAS:
-	case MACH_LEMOTE_LL2F:
-		fl2f_reboot();
-		break;
-	case MACH_LEMOTE_ML2F7:
-		ml2f_reboot();
-		break;
-	case MACH_LEMOTE_YL2F89:
-		yl2f89_reboot();
-		break;
-	default:
-		break;
-	}
-}
-
-void mach_prepare_shutdown(void)
-{
-	switch (mips_machtype) {
-	case MACH_LEMOTE_FL2F:
-	case MACH_LEMOTE_NAS:
-	case MACH_LEMOTE_LL2F:
-		fl2f_shutdown();
-		break;
-	case MACH_LEMOTE_ML2F7:
-		ml2f_shutdown();
-		break;
-	case MACH_LEMOTE_YL2F89:
-		yl2f89_shutdown();
-		break;
-	default:
-		break;
-	}
-}