arch: remove unicore32 port

The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.

Guenter Roeck says:

  I have stopped building unicore32 images since v4.19 since there is no
  available compiler that is still supported by the kernel. I am surprised
  that support for it has not been removed from the kernel.

Remove unicore32 port.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>

33 files changed, 0 insertions, 6128 deletions

diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
deleted file mode 100644
index 2f79aa56735b..000000000000
--- a/arch/unicore32/kernel/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y				:= dma.o elf.o entry.o process.o ptrace.o
-obj-y				+= setup.o signal.o sys.o stacktrace.o traps.o
-
-obj-$(CONFIG_MODULES)		+= ksyms.o module.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-
-obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
-
-# obj-y for architecture PKUnity v3
-obj-$(CONFIG_ARCH_PUV3)		+= clock.o irq.o time.o
-
-obj-$(CONFIG_PUV3_GPIO)		+= gpio.o
-obj-$(CONFIG_PUV3_PM)		+= pm.o sleep.o
-obj-$(CONFIG_HIBERNATION)	+= hibernate.o hibernate_asm.o
-
-obj-$(CONFIG_PCI)		+= pci.o
-
-# obj-y for specific machines
-obj-$(CONFIG_ARCH_PUV3)		+= puv3-core.o
-obj-$(CONFIG_PUV3_NB0916)	+= puv3-nb0916.o
-
-head-y				:= head.o
-obj-$(CONFIG_DEBUG_LL)		+= debug.o
-
-extra-y				:= $(head-y) vmlinux.lds
diff --git a/arch/unicore32/kernel/asm-offsets.c b/arch/unicore32/kernel/asm-offsets.c
deleted file mode 100644
index f7d672267549..000000000000
--- a/arch/unicore32/kernel/asm-offsets.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/asm-offsets.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/kbuild.h>
-#include <linux/suspend.h>
-#include <linux/thread_info.h>
-#include <asm/memory.h>
-#include <asm/suspend.h>
-
-/*
- * GCC 3.0, 3.1: general bad code generation.
- * GCC 3.2.0: incorrect function argument offset calculation.
- * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
- *	(http://gcc.gnu.org/PR8896) and incorrect structure
- *		initialisation in fs/jffs2/erase.c
- */
-#if (__GNUC__ < 4)
-#error Your compiler should upgrade to uc4
-#error	Known good compilers: 4.2.2
-#endif
-
-int main(void)
-{
-	DEFINE(TSK_ACTIVE_MM,	offsetof(struct task_struct, active_mm));
-	BLANK();
-	DEFINE(TI_FLAGS,	offsetof(struct thread_info, flags));
-	DEFINE(TI_PREEMPT,	offsetof(struct thread_info, preempt_count));
-	DEFINE(TI_ADDR_LIMIT,	offsetof(struct thread_info, addr_limit));
-	DEFINE(TI_TASK,		offsetof(struct thread_info, task));
-	DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
-	DEFINE(TI_CPU_SAVE,	offsetof(struct thread_info, cpu_context));
-	DEFINE(TI_USED_CP,	offsetof(struct thread_info, used_cp));
-#ifdef CONFIG_UNICORE_FPU_F64
-	DEFINE(TI_FPSTATE,	offsetof(struct thread_info, fpstate));
-#endif
-	BLANK();
-	DEFINE(S_R0,		offsetof(struct pt_regs, UCreg_00));
-	DEFINE(S_R1,		offsetof(struct pt_regs, UCreg_01));
-	DEFINE(S_R2,		offsetof(struct pt_regs, UCreg_02));
-	DEFINE(S_R3,		offsetof(struct pt_regs, UCreg_03));
-	DEFINE(S_R4,		offsetof(struct pt_regs, UCreg_04));
-	DEFINE(S_R5,		offsetof(struct pt_regs, UCreg_05));
-	DEFINE(S_R6,		offsetof(struct pt_regs, UCreg_06));
-	DEFINE(S_R7,		offsetof(struct pt_regs, UCreg_07));
-	DEFINE(S_R8,		offsetof(struct pt_regs, UCreg_08));
-	DEFINE(S_R9,		offsetof(struct pt_regs, UCreg_09));
-	DEFINE(S_R10,		offsetof(struct pt_regs, UCreg_10));
-	DEFINE(S_R11,		offsetof(struct pt_regs, UCreg_11));
-	DEFINE(S_R12,		offsetof(struct pt_regs, UCreg_12));
-	DEFINE(S_R13,		offsetof(struct pt_regs, UCreg_13));
-	DEFINE(S_R14,		offsetof(struct pt_regs, UCreg_14));
-	DEFINE(S_R15,		offsetof(struct pt_regs, UCreg_15));
-	DEFINE(S_R16,		offsetof(struct pt_regs, UCreg_16));
-	DEFINE(S_R17,		offsetof(struct pt_regs, UCreg_17));
-	DEFINE(S_R18,		offsetof(struct pt_regs, UCreg_18));
-	DEFINE(S_R19,		offsetof(struct pt_regs, UCreg_19));
-	DEFINE(S_R20,		offsetof(struct pt_regs, UCreg_20));
-	DEFINE(S_R21,		offsetof(struct pt_regs, UCreg_21));
-	DEFINE(S_R22,		offsetof(struct pt_regs, UCreg_22));
-	DEFINE(S_R23,		offsetof(struct pt_regs, UCreg_23));
-	DEFINE(S_R24,		offsetof(struct pt_regs, UCreg_24));
-	DEFINE(S_R25,		offsetof(struct pt_regs, UCreg_25));
-	DEFINE(S_R26,		offsetof(struct pt_regs, UCreg_26));
-	DEFINE(S_FP,		offsetof(struct pt_regs, UCreg_fp));
-	DEFINE(S_IP,		offsetof(struct pt_regs, UCreg_ip));
-	DEFINE(S_SP,		offsetof(struct pt_regs, UCreg_sp));
-	DEFINE(S_LR,		offsetof(struct pt_regs, UCreg_lr));
-	DEFINE(S_PC,		offsetof(struct pt_regs, UCreg_pc));
-	DEFINE(S_PSR,		offsetof(struct pt_regs, UCreg_asr));
-	DEFINE(S_OLD_R0,	offsetof(struct pt_regs, UCreg_ORIG_00));
-	DEFINE(S_FRAME_SIZE,	sizeof(struct pt_regs));
-	BLANK();
-	DEFINE(VMA_VM_MM,	offsetof(struct vm_area_struct, vm_mm));
-	DEFINE(VMA_VM_FLAGS,	offsetof(struct vm_area_struct, vm_flags));
-	BLANK();
-	DEFINE(VM_EXEC,		VM_EXEC);
-	BLANK();
-	DEFINE(PAGE_SZ,		PAGE_SIZE);
-	BLANK();
-	DEFINE(SYS_ERROR0,	0x9f0000);
-	BLANK();
-	DEFINE(PBE_ADDRESS,		offsetof(struct pbe, address));
-	DEFINE(PBE_ORIN_ADDRESS,	offsetof(struct pbe, orig_address));
-	DEFINE(PBE_NEXT,		offsetof(struct pbe, next));
-	DEFINE(SWSUSP_CPU,		offsetof(struct swsusp_arch_regs, \
-							cpu_context));
-#ifdef	CONFIG_UNICORE_FPU_F64
-	DEFINE(SWSUSP_FPSTATE,		offsetof(struct swsusp_arch_regs, \
-							fpstate));
-#endif
-	BLANK();
-	DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
-	DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
-	DEFINE(DMA_FROM_DEVICE,		DMA_FROM_DEVICE);
-	return 0;
-}
diff --git a/arch/unicore32/kernel/clock.c b/arch/unicore32/kernel/clock.c
deleted file mode 100644
index 41df6be0a3b2..000000000000
--- a/arch/unicore32/kernel/clock.c
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/clock.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple clock implementation
- */
-struct clk {
-	struct list_head	node;
-	unsigned long		rate;
-	const char		*name;
-};
-
-static struct clk clk_ost_clk = {
-	.name		= "OST_CLK",
-	.rate		= CLOCK_TICK_RATE,
-};
-
-static struct clk clk_mclk_clk = {
-	.name		= "MAIN_CLK",
-};
-
-static struct clk clk_bclk32_clk = {
-	.name		= "BUS32_CLK",
-};
-
-static struct clk clk_ddr_clk = {
-	.name		= "DDR_CLK",
-};
-
-static struct clk clk_vga_clk = {
-	.name		= "VGA_CLK",
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-struct {
-	unsigned long rate;
-	unsigned long cfg;
-	unsigned long div;
-} vga_clk_table[] = {
-	{.rate =  25175000, .cfg = 0x00002001, .div = 0x9},
-	{.rate =  31500000, .cfg = 0x00002001, .div = 0x7},
-	{.rate =  40000000, .cfg = 0x00003801, .div = 0x9},
-	{.rate =  49500000, .cfg = 0x00003801, .div = 0x7},
-	{.rate =  65000000, .cfg = 0x00002c01, .div = 0x4},
-	{.rate =  78750000, .cfg = 0x00002400, .div = 0x7},
-	{.rate = 108000000, .cfg = 0x00002c01, .div = 0x2},
-	{.rate = 106500000, .cfg = 0x00003c01, .div = 0x3},
-	{.rate =  50650000, .cfg = 0x00106400, .div = 0x9},
-	{.rate =  61500000, .cfg = 0x00106400, .div = 0xa},
-	{.rate =  85500000, .cfg = 0x00002800, .div = 0x6},
-};
-
-struct {
-	unsigned long mrate;
-	unsigned long prate;
-} mclk_clk_table[] = {
-	{.mrate = 500000000, .prate = 0x00109801},
-	{.mrate = 525000000, .prate = 0x00104C00},
-	{.mrate = 550000000, .prate = 0x00105000},
-	{.mrate = 575000000, .prate = 0x00105400},
-	{.mrate = 600000000, .prate = 0x00105800},
-	{.mrate = 625000000, .prate = 0x00105C00},
-	{.mrate = 650000000, .prate = 0x00106000},
-	{.mrate = 675000000, .prate = 0x00106400},
-	{.mrate = 700000000, .prate = 0x00106800},
-	{.mrate = 725000000, .prate = 0x00106C00},
-	{.mrate = 750000000, .prate = 0x00107000},
-	{.mrate = 775000000, .prate = 0x00107400},
-	{.mrate = 800000000, .prate = 0x00107800},
-};
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == &clk_vga_clk) {
-		unsigned long pll_vgacfg, pll_vgadiv;
-		int ret, i;
-
-		/* lookup vga_clk_table */
-		ret = -EINVAL;
-		for (i = 0; i < ARRAY_SIZE(vga_clk_table); i++) {
-			if (rate == vga_clk_table[i].rate) {
-				pll_vgacfg = vga_clk_table[i].cfg;
-				pll_vgadiv = vga_clk_table[i].div;
-				ret = 0;
-				break;
-			}
-		}
-
-		if (ret)
-			return ret;
-
-		if (readl(PM_PLLVGACFG) == pll_vgacfg)
-			return 0;
-
-		/* set pll vga cfg reg. */
-		writel(pll_vgacfg, PM_PLLVGACFG);
-
-		writel(PM_PMCR_CFBVGA, PM_PMCR);
-		while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_VGADFC)
-				!= PM_PLLDFCDONE_VGADFC)
-			udelay(100); /* about 1ms */
-
-		/* set div cfg reg. */
-		writel(readl(PM_PCGR) | PM_PCGR_VGACLK, PM_PCGR);
-
-		writel((readl(PM_DIVCFG) & ~PM_DIVCFG_VGACLK_MASK)
-				| PM_DIVCFG_VGACLK(pll_vgadiv), PM_DIVCFG);
-
-		writel(readl(PM_SWRESET) | PM_SWRESET_VGADIV, PM_SWRESET);
-		while ((readl(PM_SWRESET) & PM_SWRESET_VGADIV)
-				== PM_SWRESET_VGADIV)
-			udelay(100); /* 65536 bclk32, about 320us */
-
-		writel(readl(PM_PCGR) & ~PM_PCGR_VGACLK, PM_PCGR);
-	}
-#ifdef CONFIG_CPU_FREQ
-	if (clk == &clk_mclk_clk) {
-		u32 pll_rate, divstatus = readl(PM_DIVSTATUS);
-		int ret, i;
-
-		/* lookup mclk_clk_table */
-		ret = -EINVAL;
-		for (i = 0; i < ARRAY_SIZE(mclk_clk_table); i++) {
-			if (rate == mclk_clk_table[i].mrate) {
-				pll_rate = mclk_clk_table[i].prate;
-				clk_mclk_clk.rate = mclk_clk_table[i].mrate;
-				ret = 0;
-				break;
-			}
-		}
-
-		if (ret)
-			return ret;
-
-		if (clk_mclk_clk.rate)
-			clk_bclk32_clk.rate = clk_mclk_clk.rate
-				/ (((divstatus & 0x0000f000) >> 12) + 1);
-
-		/* set pll sys cfg reg. */
-		writel(pll_rate, PM_PLLSYSCFG);
-
-		writel(PM_PMCR_CFBSYS, PM_PMCR);
-		while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_SYSDFC)
-				!= PM_PLLDFCDONE_SYSDFC)
-			udelay(100);
-			/* about 1ms */
-	}
-#endif
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	printk(KERN_DEFAULT "PKUnity PM: %s %lu.%02luM\n", clk->name,
-		(clk->rate)/1000000, (clk->rate)/10000 % 100);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-struct {
-	unsigned long prate;
-	unsigned long rate;
-} pllrate_table[] = {
-	{.prate = 0x00002001, .rate = 250000000},
-	{.prate = 0x00104801, .rate = 250000000},
-	{.prate = 0x00104C01, .rate = 262500000},
-	{.prate = 0x00002401, .rate = 275000000},
-	{.prate = 0x00105001, .rate = 275000000},
-	{.prate = 0x00105401, .rate = 287500000},
-	{.prate = 0x00002801, .rate = 300000000},
-	{.prate = 0x00105801, .rate = 300000000},
-	{.prate = 0x00105C01, .rate = 312500000},
-	{.prate = 0x00002C01, .rate = 325000000},
-	{.prate = 0x00106001, .rate = 325000000},
-	{.prate = 0x00106401, .rate = 337500000},
-	{.prate = 0x00003001, .rate = 350000000},
-	{.prate = 0x00106801, .rate = 350000000},
-	{.prate = 0x00106C01, .rate = 362500000},
-	{.prate = 0x00003401, .rate = 375000000},
-	{.prate = 0x00107001, .rate = 375000000},
-	{.prate = 0x00107401, .rate = 387500000},
-	{.prate = 0x00003801, .rate = 400000000},
-	{.prate = 0x00107801, .rate = 400000000},
-	{.prate = 0x00107C01, .rate = 412500000},
-	{.prate = 0x00003C01, .rate = 425000000},
-	{.prate = 0x00108001, .rate = 425000000},
-	{.prate = 0x00108401, .rate = 437500000},
-	{.prate = 0x00004001, .rate = 450000000},
-	{.prate = 0x00108801, .rate = 450000000},
-	{.prate = 0x00108C01, .rate = 462500000},
-	{.prate = 0x00004401, .rate = 475000000},
-	{.prate = 0x00109001, .rate = 475000000},
-	{.prate = 0x00109401, .rate = 487500000},
-	{.prate = 0x00004801, .rate = 500000000},
-	{.prate = 0x00109801, .rate = 500000000},
-	{.prate = 0x00104C00, .rate = 525000000},
-	{.prate = 0x00002400, .rate = 550000000},
-	{.prate = 0x00105000, .rate = 550000000},
-	{.prate = 0x00105400, .rate = 575000000},
-	{.prate = 0x00002800, .rate = 600000000},
-	{.prate = 0x00105800, .rate = 600000000},
-	{.prate = 0x00105C00, .rate = 625000000},
-	{.prate = 0x00002C00, .rate = 650000000},
-	{.prate = 0x00106000, .rate = 650000000},
-	{.prate = 0x00106400, .rate = 675000000},
-	{.prate = 0x00003000, .rate = 700000000},
-	{.prate = 0x00106800, .rate = 700000000},
-	{.prate = 0x00106C00, .rate = 725000000},
-	{.prate = 0x00003400, .rate = 750000000},
-	{.prate = 0x00107000, .rate = 750000000},
-	{.prate = 0x00107400, .rate = 775000000},
-	{.prate = 0x00003800, .rate = 800000000},
-	{.prate = 0x00107800, .rate = 800000000},
-	{.prate = 0x00107C00, .rate = 825000000},
-	{.prate = 0x00003C00, .rate = 850000000},
-	{.prate = 0x00108000, .rate = 850000000},
-	{.prate = 0x00108400, .rate = 875000000},
-	{.prate = 0x00004000, .rate = 900000000},
-	{.prate = 0x00108800, .rate = 900000000},
-	{.prate = 0x00108C00, .rate = 925000000},
-	{.prate = 0x00004400, .rate = 950000000},
-	{.prate = 0x00109000, .rate = 950000000},
-	{.prate = 0x00109400, .rate = 975000000},
-	{.prate = 0x00004800, .rate = 1000000000},
-	{.prate = 0x00109800, .rate = 1000000000},
-};
-
-struct {
-	unsigned long prate;
-	unsigned long drate;
-} pddr_table[] = {
-	{.prate = 0x00100800, .drate = 44236800},
-	{.prate = 0x00100C00, .drate = 66355200},
-	{.prate = 0x00101000, .drate = 88473600},
-	{.prate = 0x00101400, .drate = 110592000},
-	{.prate = 0x00101800, .drate = 132710400},
-	{.prate = 0x00101C01, .drate = 154828800},
-	{.prate = 0x00102001, .drate = 176947200},
-	{.prate = 0x00102401, .drate = 199065600},
-	{.prate = 0x00102801, .drate = 221184000},
-	{.prate = 0x00102C01, .drate = 243302400},
-	{.prate = 0x00103001, .drate = 265420800},
-	{.prate = 0x00103401, .drate = 287539200},
-	{.prate = 0x00103801, .drate = 309657600},
-	{.prate = 0x00103C01, .drate = 331776000},
-	{.prate = 0x00104001, .drate = 353894400},
-};
-
-static int __init clk_init(void)
-{
-#ifdef CONFIG_PUV3_PM
-	u32 pllrate, divstatus = readl(PM_DIVSTATUS);
-	u32 pcgr_val = readl(PM_PCGR);
-	int i;
-
-	pcgr_val |= PM_PCGR_BCLKMME | PM_PCGR_BCLKH264E | PM_PCGR_BCLKH264D
-			| PM_PCGR_HECLK | PM_PCGR_HDCLK;
-	writel(pcgr_val, PM_PCGR);
-
-	pllrate = readl(PM_PLLSYSSTATUS);
-
-	/* lookup pmclk_table */
-	clk_mclk_clk.rate = 0;
-	for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
-		if (pllrate == pllrate_table[i].prate) {
-			clk_mclk_clk.rate = pllrate_table[i].rate;
-			break;
-		}
-	}
-
-	if (clk_mclk_clk.rate)
-		clk_bclk32_clk.rate = clk_mclk_clk.rate /
-			(((divstatus & 0x0000f000) >> 12) + 1);
-
-	pllrate = readl(PM_PLLDDRSTATUS);
-
-	/* lookup pddr_table */
-	clk_ddr_clk.rate = 0;
-	for (i = 0; i < ARRAY_SIZE(pddr_table); i++) {
-		if (pllrate == pddr_table[i].prate) {
-			clk_ddr_clk.rate = pddr_table[i].drate;
-			break;
-		}
-	}
-
-	pllrate = readl(PM_PLLVGASTATUS);
-
-	/* lookup pvga_table */
-	clk_vga_clk.rate = 0;
-	for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
-		if (pllrate == pllrate_table[i].prate) {
-			clk_vga_clk.rate = pllrate_table[i].rate;
-			break;
-		}
-	}
-
-	if (clk_vga_clk.rate)
-		clk_vga_clk.rate = clk_vga_clk.rate /
-			(((divstatus & 0x00f00000) >> 20) + 1);
-
-	clk_register(&clk_vga_clk);
-#endif
-#ifdef CONFIG_ARCH_FPGA
-	clk_ddr_clk.rate = 33000000;
-	clk_mclk_clk.rate = 33000000;
-	clk_bclk32_clk.rate = 33000000;
-#endif
-	clk_register(&clk_ddr_clk);
-	clk_register(&clk_mclk_clk);
-	clk_register(&clk_bclk32_clk);
-	clk_register(&clk_ost_clk);
-	return 0;
-}
-core_initcall(clk_init);
diff --git a/arch/unicore32/kernel/debug-macro.S b/arch/unicore32/kernel/debug-macro.S
deleted file mode 100644
index 7e2da0de4f71..000000000000
--- a/arch/unicore32/kernel/debug-macro.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/debug-macro.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Debugging macro include header
- */
-#include <generated/asm-offsets.h>
-#include <mach/hardware.h>
-
-		.macro	put_word_ocd, rd, rx=r16
-1001:		movc		\rx, p1.c0, #0
-		cand.a	\rx, #2
-		bne	1001b
-		movc		p1.c1, \rd, #1
-		.endm
-
-#ifdef CONFIG_DEBUG_OCD
-		/* debug using UniCore On-Chip-Debugger */
-		.macro	addruart, rx
-		.endm
-
-		.macro	senduart, rd, rx
-		put_word_ocd	\rd, \rx
-		.endm
-
-		.macro	busyuart, rd, rx
-		.endm
-
-		.macro	waituart, rd, rx
-		.endm
-#else
-#define UART_CLK_DEFAULT        3686400 * 20
-	/* Uartclk = MCLK/ 2, The MCLK on my board is 3686400 * 40  */
-#define BAUD_RATE_DEFAULT	115200
-	/* The baud rate of the serial port */
-
-#define UART_DIVISOR_DEFAULT	(UART_CLK_DEFAULT \
-				/ (16 * BAUD_RATE_DEFAULT) - 1)
-
-		.macro	addruart,rx
-		mrc	p0, #0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xee000000	@ physical base address
-		movne	\rx, #0x6e000000	@ virtual address
-
-		@ We probe for the active serial port here
-		@ However, now we assume UART0 is active:	epip4d
-		@ We assume r1 and r2 can be clobbered.
-
-		movl 	r2, #UART_DIVISOR_DEFAULT
-		mov 	r1, #0x80
-		str	r1, [\rx, #UART_LCR_OFFSET]
-		and	r1, r2, #0xff00
-		mov	r1, r1, lsr #8
-		str	r1, [\rx, #UART_DLH_OFFSET]
-		and	r1, r2, #0xff
-		str	r1, [\rx, #UART_DLL_OFFSET]
-		mov 	r1, #0x7
-		str	r1, [\rx, #UART_FCR_OFFSET]
-		mov 	r1, #0x3
-		str	r1, [\rx, #UART_LCR_OFFSET]
-		mov 	r1, #0x0
-		str	r1, [\rx, #UART_IER_OFFSET]
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_THR_OFFSET]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UART_LSR_OFFSET]
-		tst	\rd, #UART_LSR_THRE
-		beq	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UART_LSR_OFFSET]
-		tst	\rd, #UART_LSR_TEMT
-		bne	1001b
-		.endm
-#endif
-
diff --git a/arch/unicore32/kernel/debug.S b/arch/unicore32/kernel/debug.S
deleted file mode 100644
index 13bc8c8550e4..000000000000
--- a/arch/unicore32/kernel/debug.S
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/debug.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  32-bit debugging code
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/*
- * Some debugging routines (useful if you've got MM problems and
- * printk isn't working).  For DEBUGGING ONLY!!!  Do not leave
- * references to these in a production kernel!
- */
-#include "debug-macro.S"
-
-/*
- * Useful debugging routines
- */
-ENTRY(printhex8)
-		mov	r1, #8
-		b	printhex
-ENDPROC(printhex8)
-
-ENTRY(printhex4)
-		mov	r1, #4
-		b	printhex
-ENDPROC(printhex4)
-
-ENTRY(printhex2)
-		mov	r1, #2
-printhex:	adr	r2, hexbuf
-		add	r3, r2, r1
-		mov	r1, #0
-		stb	r1, [r3]
-1:		and	r1, r0, #15
-		mov	r0, r0 >> #4
-		csub.a	r1, #10
-		beg	2f
-		add	r1, r1, #'0' - 'a' + 10
-2:		add	r1, r1, #'a' - 10
-		stb.w	r1, [r3+], #-1
-		cxor.a	r3, r2
-		bne	1b
-		mov	r0, r2
-		b	printascii
-ENDPROC(printhex2)
-
-		.ltorg
-
-ENTRY(printascii)
-		addruart r3
-		b	2f
-1:		waituart r2, r3
-		senduart r1, r3
-		busyuart r2, r3
-		cxor.a	r1, #'\n'
-		cmoveq	r1, #'\r'
-		beq	1b
-2:		cxor.a	r0, #0
-		beq	3f
-		ldb.w	r1, [r0]+, #1
-		cxor.a	r1, #0
-		bne	1b
-3:		mov	pc, lr
-ENDPROC(printascii)
-
-ENTRY(printch)
-		addruart r3
-		mov	r1, r0
-		mov	r0, #0
-		b	1b
-ENDPROC(printch)
-
-hexbuf:		.space 16
-
diff --git a/arch/unicore32/kernel/dma.c b/arch/unicore32/kernel/dma.c
deleted file mode 100644
index 7a0e2d4d6077..000000000000
--- a/arch/unicore32/kernel/dma.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/dma.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-struct dma_channel {
-	char *name;
-	puv3_dma_prio prio;
-	void (*irq_handler)(int, void *);
-	void (*err_handler)(int, void *);
-	void *data;
-};
-
-static struct dma_channel dma_channels[MAX_DMA_CHANNELS];
-
-int puv3_request_dma(char *name, puv3_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void (*err_handler)(int, void *),
-			 void *data)
-{
-	unsigned long flags;
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	do {
-		/* try grabbing a DMA channel with the requested priority */
-		for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-			if ((dma_channels[i].prio == prio) &&
-			    !dma_channels[i].name) {
-				found = 1;
-				break;
-			}
-		}
-		/* if requested prio group is full, try a hier priority */
-	} while (!found && prio--);
-
-	if (found) {
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].err_handler = err_handler;
-		dma_channels[i].data = data;
-	} else {
-		printk(KERN_WARNING "No more available DMA channels for %s\n",
-				name);
-		i = -ENODEV;
-	}
-
-	local_irq_restore(flags);
-	return i;
-}
-EXPORT_SYMBOL(puv3_request_dma);
-
-void puv3_free_dma(int dma_ch)
-{
-	unsigned long flags;
-
-	if (!dma_channels[dma_ch].name) {
-		printk(KERN_CRIT
-			"%s: trying to free channel %d which is already freed\n",
-			__func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	dma_channels[dma_ch].name = NULL;
-	dma_channels[dma_ch].err_handler = NULL;
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(puv3_free_dma);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, dint;
-
-	dint = readl(DMAC_ITCSR);
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		if (dint & DMAC_CHANNEL(i)) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			/* Clear TC interrupt of channel i */
-			writel(DMAC_CHANNEL(i), DMAC_ITCCR);
-			writel(0, DMAC_ITCCR);
-
-			if (channel->name && channel->irq_handler) {
-				channel->irq_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING "spurious IRQ for"
-						" DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, dint;
-
-	dint = readl(DMAC_IESR);
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		if (dint & DMAC_CHANNEL(i)) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			/* Clear Err interrupt of channel i */
-			writel(DMAC_CHANNEL(i), DMAC_IECR);
-			writel(0, DMAC_IECR);
-
-			if (channel->name && channel->err_handler) {
-				channel->err_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING "spurious IRQ for"
-						" DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-int __init puv3_init_dma(void)
-{
-	int i, ret;
-
-	/* dma channel priorities on v8 processors:
-	 * ch 0 - 1  <--> (0) DMA_PRIO_HIGH
-	 * ch 2 - 3  <--> (1) DMA_PRIO_MEDIUM
-	 * ch 4 - 5  <--> (2) DMA_PRIO_LOW
-	 */
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		puv3_stop_dma(i);
-		dma_channels[i].name = NULL;
-		dma_channels[i].prio = min((i & 0x7) >> 1, DMA_PRIO_LOW);
-	}
-
-	ret = request_irq(IRQ_DMA, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Can't register IRQ for DMA\n");
-		return ret;
-	}
-
-	ret = request_irq(IRQ_DMAERR, dma_err_handler, 0, "DMAERR", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Can't register IRQ for DMAERR\n");
-		free_irq(IRQ_DMA, "DMA");
-		return ret;
-	}
-
-	return 0;
-}
-
-postcore_initcall(puv3_init_dma);
diff --git a/arch/unicore32/kernel/early_printk.c b/arch/unicore32/kernel/early_printk.c
deleted file mode 100644
index c00b6712b8f7..000000000000
--- a/arch/unicore32/kernel/early_printk.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/early_printk.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <mach/ocd.h>
-
-/* On-Chip-Debugger functions */
-
-static void early_ocd_write(struct console *con, const char *s, unsigned n)
-{
-	while (*s && n-- > 0) {
-		if (*s == '\n')
-			ocd_putc((int)'\r');
-		ocd_putc((int)*s);
-		s++;
-	}
-}
-
-static struct console early_ocd_console = {
-	.name =		"earlyocd",
-	.write =	early_ocd_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-static int __init setup_early_printk(char *buf)
-{
-	if (!buf || early_console)
-		return 0;
-
-	early_console = &early_ocd_console;
-	if (strstr(buf, "keep"))
-		early_console->flags &= ~CON_BOOT;
-	else
-		early_console->flags |= CON_BOOT;
-	register_console(early_console);
-	return 0;
-}
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/unicore32/kernel/elf.c b/arch/unicore32/kernel/elf.c
deleted file mode 100644
index 22adc65a03e9..000000000000
--- a/arch/unicore32/kernel/elf.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/elf.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/elf.h>
-
-int elf_check_arch(const struct elf32_hdr *x)
-{
-	/* Make sure it's an UniCore executable */
-	if (x->e_machine != EM_UNICORE)
-		return 0;
-
-	/* Make sure the entry address is reasonable */
-	if (x->e_entry & 3)
-		return 0;
-
-	return 1;
-}
-EXPORT_SYMBOL(elf_check_arch);
-
-void elf_set_personality(const struct elf32_hdr *x)
-{
-	unsigned int personality = PER_LINUX;
-
-	set_personality(personality);
-}
-EXPORT_SYMBOL(elf_set_personality);
diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S
deleted file mode 100644
index b35dc83069cb..000000000000
--- a/arch/unicore32/kernel/entry.S
+++ /dev/null
@@ -1,802 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/entry.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  Low-level vector interface routines
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/unistd.h>
-#include <generated/asm-offsets.h>
-#include "debug-macro.S"
-
-@
-@ Most of the stack format comes from struct pt_regs, but with
-@ the addition of 8 bytes for storing syscall args 5 and 6.
-@
-#define S_OFF		8
-
-/*
- * The SWI code relies on the fact that R0 is at the bottom of the stack
- * (due to slow/fast restore user regs).
- */
-#if S_R0 != 0
-#error "Please fix"
-#endif
-
-	.macro	zero_fp
-#ifdef CONFIG_FRAME_POINTER
-	mov	fp, #0
-#endif
-	.endm
-
-	.macro	alignment_trap, rtemp
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldw	\rtemp, .LCcralign
-	ldw	\rtemp, [\rtemp]
-	movc	p0.c1, \rtemp, #0
-#endif
-	.endm
-
-	.macro	load_user_sp_lr, rd, rtemp, offset = 0
-	mov	\rtemp, asr
-	xor	\rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
-	mov.a	asr, \rtemp			@ switch to the SUSR mode
-
-	ldw	sp, [\rd+], #\offset		@ load sp_user
-	ldw	lr, [\rd+], #\offset + 4	@ load lr_user
-
-	xor	\rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
-	mov.a	asr, \rtemp			@ switch back to the PRIV mode
-	.endm
-
-	.macro	priv_exit, rpsr
-	mov.a	bsr, \rpsr
-	ldm.w	(r0 - r15), [sp]+
-	ldm.b	(r16 - pc), [sp]+		@ load r0 - pc, asr
-	.endm
-
-	.macro	restore_user_regs, fast = 0, offset = 0
-	ldw	r1, [sp+], #\offset + S_PSR	@ get calling asr
-	ldw	lr, [sp+], #\offset + S_PC	@ get pc
-	mov.a	bsr, r1				@ save in bsr_priv
-	.if	\fast
-	add	sp, sp, #\offset + S_R1		@ r0 is syscall return value
-	ldm.w	(r1 - r15), [sp]+		@ get calling r1 - r15
-	ldur	(r16 - lr), [sp]+		@ get calling r16 - lr
-	.else
-	ldm.w	(r0 - r15), [sp]+		@ get calling r0 - r15
-	ldur	(r16 - lr), [sp]+		@ get calling r16 - lr
-	.endif
-	nop
-	add	sp, sp, #S_FRAME_SIZE - S_R16
-	mov.a	pc, lr				@ return
-						@ and move bsr_priv into asr
-	.endm
-
-	.macro	get_thread_info, rd
-	mov	\rd, sp >> #13
-	mov	\rd, \rd << #13
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldw	\base, =(PKUNITY_INTC_BASE)
-	ldw	\irqstat, [\base+], #0xC	@ INTC_ICIP
-	ldw	\tmp,	  [\base+], #0x4	@ INTC_ICMR
-	and.a	\irqstat, \irqstat, \tmp
-	beq	1001f
-	cntlz	\irqnr, \irqstat
-	rsub	\irqnr, \irqnr, #31
-1001:	/* EQ will be set if no irqs pending */
-	.endm
-
-#ifdef CONFIG_DEBUG_LL
-	.macro	printreg, reg, temp
-		adr	\temp, 901f
-		stm	(r0-r3), [\temp]+
-		stw	lr, [\temp+], #0x10
-		mov	r0, \reg
-		b.l	printhex8
-		mov	r0, #':'
-		b.l	printch
-		mov	r0, pc
-		b.l	printhex8
-		adr	r0, 902f
-		b.l	printascii
-		adr	\temp, 901f
-		ldm	(r0-r3), [\temp]+
-		ldw	lr, [\temp+], #0x10
-		b	903f
-901:	.word	0, 0, 0, 0, 0	@ r0-r3, lr
-902:	.asciz	": epip4d\n"
-	.align
-903:
-	.endm
-#endif
-
-/*
- * These are the registers used in the syscall handler, and allow us to
- * have in theory up to 7 arguments to a function - r0 to r6.
- *
- * Note that tbl == why is intentional.
- *
- * We must set at least "tsk" and "why" when calling ret_with_reschedule.
- */
-scno	.req	r21		@ syscall number
-tbl	.req	r22		@ syscall table pointer
-why	.req	r22		@ Linux syscall (!= 0)
-tsk	.req	r23		@ current thread_info
-
-/*
- * Interrupt handling.  Preserves r17, r18, r19
- */
-	.macro	intr_handler
-1:	get_irqnr_and_base r0, r6, r5, lr
-	beq	2f
-	mov	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	adr	lr, 1b
-	b	asm_do_IRQ
-2:
-	.endm
-
-/*
- * PRIV mode handlers
- */
-	.macro	priv_entry
-	sub	sp, sp, #(S_FRAME_SIZE - 4)
-	stm	(r1 - r15), [sp]+
-	add	r5, sp, #S_R15
-	stm	(r16 - r28), [r5]+
-
-	ldm	(r1 - r3), [r0]+
-	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
-	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE - 4)
-	stw.w	r1, [sp+], #-4		@ save the "real" r0 copied
-					@ from the exception stack
-
-	mov	r1, lr
-
-	@
-	@ We are now ready to fill in the remaining blanks on the stack:
-	@
-	@  r0 - sp_priv
-	@  r1 - lr_priv
-	@  r2 - lr_<exception>, already fixed up for correct return/restart
-	@  r3 - bsr_<exception>
-	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
-	@
-	stm	(r0 - r4), [r5]+
-	.endm
-
-/*
- * User mode handlers
- *
- */
-	.macro	user_entry
-	sub	sp, sp, #S_FRAME_SIZE
-	stm	(r1 - r15), [sp+]
-	add	r4, sp, #S_R16
-	stm	(r16 - r28), [r4]+
-
-	ldm	(r1 - r3), [r0]+
-	add	r0, sp, #S_PC		@ here for interlock avoidance
-	mov	r4, #-1			@  ""  ""     ""        ""
-
-	stw	r1, [sp]		@ save the "real" r0 copied
-					@ from the exception stack
-
-	@
-	@ We are now ready to fill in the remaining blanks on the stack:
-	@
-	@  r2 - lr_<exception>, already fixed up for correct return/restart
-	@  r3 - bsr_<exception>
-	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
-	@
-	@ Also, separately save sp_user and lr_user
-	@
-	stm	(r2 - r4), [r0]+
-	stur	(sp, lr), [r0-]
-
-	@
-	@ Enable the alignment trap while in kernel mode
-	@
-	alignment_trap r0
-
-	@
-	@ Clear FP to mark the first stack frame
-	@
-	zero_fp
-	.endm
-
-	.text
-
-@
-@ __invalid - generic code for failed exception
-@			(re-entrant version of handlers)
-@
-__invalid:
-	sub	sp, sp, #S_FRAME_SIZE
-	stm	(r1 - r15), [sp+]
-	add	r1, sp, #S_R16
-	stm	(r16 - r28, sp, lr), [r1]+
-
-	zero_fp
-
-	ldm	(r4 - r6), [r0]+
-	add	r0, sp, #S_PC		@ here for interlock avoidance
-	mov	r7, #-1			@  ""   ""    ""        ""
-	stw	r4, [sp]		@ save preserved r0
-	stm	(r5 - r7), [r0]+	@ lr_<exception>,
-					@ asr_<exception>, "old_r0"
-
-	mov	r0, sp
-	mov	r1, asr
-	b	bad_mode
-ENDPROC(__invalid)
-
-	.align	5
-__dabt_priv:
-	priv_entry
-
-	@
-	@ get ready to re-enable interrupts if appropriate
-	@
-	mov	r17, asr
-	cand.a	r3, #PSR_I_BIT
-	bne	1f
-	andn	r17, r17, #PSR_I_BIT
-1:
-
-	@
-	@ Call the processor-specific abort handler:
-	@
-	@  r2 - aborted context pc
-	@  r3 - aborted context asr
-	@
-	@ The abort handler must return the aborted address in r0, and
-	@ the fault status register in r1.
-	@
-	movc	r1, p0.c3, #0		@ get FSR
-	movc	r0, p0.c4, #0		@ get FAR
-
-	@
-	@ set desired INTR state, then call main handler
-	@
-	mov.a	asr, r17
-	mov	r2, sp
-	b.l	do_DataAbort
-
-	@
-	@ INTRs off again before pulling preserved data off the stack
-	@
-	disable_irq r0
-
-	@
-	@ restore BSR and restart the instruction
-	@
-	ldw	r2, [sp+], #S_PSR
-	priv_exit r2				@ return from exception
-ENDPROC(__dabt_priv)
-
-	.align	5
-__intr_priv:
-	priv_entry
-
-	intr_handler
-
-	mov	r0, #0				@ epip4d
-	movc	p0.c5, r0, #14
-	nop; nop; nop; nop; nop; nop; nop; nop
-
-	ldw	r4, [sp+], #S_PSR		@ irqs are already disabled
-
-	priv_exit r4				@ return from exception
-ENDPROC(__intr_priv)
-
-	.ltorg
-
-	.align	5
-__extn_priv:
-	priv_entry
-
-	mov	r0, sp				@ struct pt_regs *regs
-	mov	r1, asr
-	b	bad_mode			@ not supported
-ENDPROC(__extn_priv)
-
-	.align	5
-__pabt_priv:
-	priv_entry
-
-	@
-	@ re-enable interrupts if appropriate
-	@
-	mov	r17, asr
-	cand.a	r3, #PSR_I_BIT
-	bne	1f
-	andn	r17, r17, #PSR_I_BIT
-1:
-
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-	mov	r0, r2			@ pass address of aborted instruction
-	mov	r1, #5
-	mov.a	asr, r17
-	mov	r2, sp			@ regs
-	b.l	do_PrefetchAbort	@ call abort handler
-
-	@
-	@ INTRs off again before pulling preserved data off the stack
-	@
-	disable_irq r0
-
-	@
-	@ restore BSR and restart the instruction
-	@
-	ldw	r2, [sp+], #S_PSR
-	priv_exit r2			@ return from exception
-ENDPROC(__pabt_priv)
-
-	.align	5
-.LCcralign:
-	.word	cr_alignment
-
-	.align	5
-__dabt_user:
-	user_entry
-
-#ifdef CONFIG_UNICORE_FPU_F64
-	cff	ip, s31
-	cand.a	ip, #0x08000000		@ FPU execption traps?
-	beq	209f
-
-	ldw	ip, [sp+], #S_PC
-	add	ip, ip, #4
-	stw	ip, [sp+], #S_PC
-	@
-	@ fall through to the emulation code, which returns using r19 if
-	@ it has emulated the instruction, or the more conventional lr
-	@ if we are to treat this as a real extended instruction
-	@
-	@  r0 - instruction
-	@
-1:	ldw.u	r0, [r2]
-	adr	r19, ret_from_exception
-	adr	lr, 209f
-	@
-	@ fallthrough to call do_uc_f64
-	@
-/*
- * Check whether the instruction is a co-processor instruction.
- * If yes, we need to call the relevant co-processor handler.
- *
- * Note that we don't do a full check here for the co-processor
- * instructions; all instructions with bit 27 set are well
- * defined.  The only instructions that should fault are the
- * co-processor instructions.
- *
- * Emulators may wish to make use of the following registers:
- *  r0  = instruction opcode.
- *  r2  = PC
- *  r19 = normal "successful" return address
- *  r20 = this threads thread_info structure.
- *  lr  = unrecognised instruction return address
- */
-	get_thread_info r20			@ get current thread
-	and	r8, r0, #0x00003c00		@ mask out CP number
-	mov	r7, #1
-	stb	r7, [r20+], #TI_USED_CP + 2	@ set appropriate used_cp[]
-
-	@ F64 hardware support entry point.
-	@  r0  = faulted instruction
-	@  r19 = return address
-	@  r20 = fp_state
-	enable_irq r4
-	add	r20, r20, #TI_FPSTATE	@ r20 = workspace
-	cff	r1, s31			@ get fpu FPSCR
-	andn    r2, r1, #0x08000000
-	ctf     r2, s31			@ clear 27 bit
-	mov	r2, sp			@ nothing stacked - regdump is at TOS
-	mov	lr, r19			@ setup for a return to the user code
-
-	@ Now call the C code to package up the bounce to the support code
-	@   r0 holds the trigger instruction
-	@   r1 holds the FPSCR value
-	@   r2 pointer to register dump
-	b	ucf64_exchandler
-209:
-#endif
-	@
-	@ Call the processor-specific abort handler:
-	@
-	@  r2 - aborted context pc
-	@  r3 - aborted context asr
-	@
-	@ The abort handler must return the aborted address in r0, and
-	@ the fault status register in r1.
-	@
-	movc	r1, p0.c3, #0		@ get FSR
-	movc	r0, p0.c4, #0		@ get FAR
-
-	@
-	@ INTRs on, then call the main handler
-	@
-	enable_irq r2
-	mov	r2, sp
-	adr	lr, ret_from_exception
-	b	do_DataAbort
-ENDPROC(__dabt_user)
-
-	.align	5
-__intr_user:
-	user_entry
-
-	get_thread_info tsk
-
-	intr_handler
-
-	mov	why, #0
-	b	ret_to_user
-ENDPROC(__intr_user)
-
-	.ltorg
-
-	.align	5
-__extn_user:
-	user_entry
-
-	mov	r0, sp
-	mov	r1, asr
-	b	bad_mode
-ENDPROC(__extn_user)
-
-	.align	5
-__pabt_user:
-	user_entry
-
-	mov	r0, r2			@ pass address of aborted instruction.
-	mov	r1, #5
-	enable_irq r1			@ Enable interrupts
-	mov	r2, sp			@ regs
-	b.l	do_PrefetchAbort	@ call abort handler
-	/* fall through */
-/*
- * This is the return code to user mode for abort handlers
- */
-ENTRY(ret_from_exception)
-	get_thread_info tsk
-	mov	why, #0
-	b	ret_to_user
-ENDPROC(__pabt_user)
-ENDPROC(ret_from_exception)
-
-/*
- * Register switch for UniCore V2 processors
- * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
- * previous and next are guaranteed not to be the same.
- */
-ENTRY(__switch_to)
-	add	ip, r1, #TI_CPU_SAVE
-	stm.w	(r4 - r15), [ip]+
-	stm.w	(r16 - r27, sp, lr), [ip]+
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	add	ip, r1, #TI_FPSTATE
-	sfm.w	(f0  - f7 ), [ip]+
-	sfm.w	(f8  - f15), [ip]+
-	sfm.w	(f16 - f23), [ip]+
-	sfm.w	(f24 - f31), [ip]+
-	cff	r4, s31
-	stw	r4, [ip]
-
-	add	ip, r2, #TI_FPSTATE
-	lfm.w	(f0  - f7 ), [ip]+
-	lfm.w	(f8  - f15), [ip]+
-	lfm.w	(f16 - f23), [ip]+
-	lfm.w	(f24 - f31), [ip]+
-	ldw	r4, [ip]
-	ctf	r4, s31
-#endif
-	add	ip, r2, #TI_CPU_SAVE
-	ldm.w	(r4 - r15), [ip]+
-	ldm	(r16 - r27, sp, pc), [ip]+	@ Load all regs saved previously
-ENDPROC(__switch_to)
-
-	.align	5
-/*
- * This is the fast syscall return path.  We do as little as
- * possible here, and this includes saving r0 back into the PRIV
- * stack.
- */
-ret_fast_syscall:
-	disable_irq r1				@ disable interrupts
-	ldw	r1, [tsk+], #TI_FLAGS
-	cand.a	r1, #_TIF_WORK_MASK
-	bne	fast_work_pending
-
-	@ fast_restore_user_regs
-	restore_user_regs fast = 1, offset = S_OFF
-
-/*
- * Ok, we need to do extra processing, enter the slow path.
- */
-fast_work_pending:
-	stw.w	r0, [sp+], #S_R0+S_OFF		@ returned r0
-work_pending:
-	cand.a	r1, #_TIF_NEED_RESCHED
-	bne	work_resched
-	mov	r0, sp				@ 'regs'
-	mov	r2, why				@ 'syscall'
-	cand.a	r1, #_TIF_SIGPENDING		@ delivering a signal?
-	cmovne	why, #0				@ prevent further restarts
-	b.l	do_notify_resume
-	b	ret_slow_syscall		@ Check work again
-
-work_resched:
-	b.l	schedule
-/*
- * "slow" syscall return path.  "why" tells us if this was a real syscall.
- */
-ENTRY(ret_to_user)
-ret_slow_syscall:
-	disable_irq r1				@ disable interrupts
-	get_thread_info tsk			@ epip4d, one path error?!
-	ldw	r1, [tsk+], #TI_FLAGS
-	cand.a	r1, #_TIF_WORK_MASK
-	bne	work_pending
-no_work_pending:
-	@ slow_restore_user_regs
-	restore_user_regs fast = 0, offset = 0
-ENDPROC(ret_to_user)
-
-/*
- * This is how we return from a fork.
- */
-ENTRY(ret_from_fork)
-	b.l	schedule_tail
-	b	ret_slow_syscall
-ENDPROC(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
-	b.l	schedule_tail
-	mov	r0, r5
-	adr	lr, ret_slow_syscall
-	mov	pc, r4
-ENDPROC(ret_from_kernel_thread)
-
-/*=============================================================================
- * SWI handler
- *-----------------------------------------------------------------------------
- */
-	.align	5
-ENTRY(vector_swi)
-	sub	sp, sp, #S_FRAME_SIZE
-	stm	(r0 - r15), [sp]+		@ Calling r0 - r15
-	add	r8, sp, #S_R16
-	stm	(r16 - r28), [r8]+		@ Calling r16 - r28
-	add	r8, sp, #S_PC
-	stur	(sp, lr), [r8-]			@ Calling sp, lr
-	mov	r8, bsr				@ called from non-REAL mode
-	stw	lr, [sp+], #S_PC		@ Save calling PC
-	stw	r8, [sp+], #S_PSR		@ Save ASR
-	stw	r0, [sp+], #S_OLD_R0		@ Save OLD_R0
-	zero_fp
-
-	/*
-	 * Get the system call number.
-	 */
-	sub	ip, lr, #4
-	ldw.u	scno, [ip]			@ get SWI instruction
-
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldw	ip, __cr_alignment
-	ldw	ip, [ip]
-	movc	p0.c1, ip, #0                   @ update control register
-#endif
-	enable_irq ip
-
-	get_thread_info tsk
-	ldw	tbl, =sys_call_table		@ load syscall table pointer
-
-	andn	scno, scno, #0xff000000		@ mask off SWI op-code
-	andn	scno, scno, #0x00ff0000		@ mask off SWI op-code
-
-	stm.w	(r4, r5), [sp-]			@ push fifth and sixth args
-	ldw	ip, [tsk+], #TI_FLAGS		@ check for syscall tracing
-	cand.a	ip, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
-	bne	__sys_trace
-
-	csub.a	scno, #__NR_syscalls		@ check upper syscall limit
-	adr	lr, ret_fast_syscall		@ return address
-	bea	1f
-	ldw	pc, [tbl+], scno << #2		@ call sys_* routine
-1:
-	add	r1, sp, #S_OFF
-2:	mov	why, #0				@ no longer a real syscall
-	b	sys_ni_syscall			@ not private func
-
-	/*
-	 * This is the really slow path.  We're going to be doing
-	 * context switches, and waiting for our parent to respond.
-	 */
-__sys_trace:
-	mov	r2, scno
-	add	r1, sp, #S_OFF
-	mov	r0, #0				@ trace entry [IP = 0]
-	b.l	syscall_trace
-
-	adr	lr, __sys_trace_return		@ return address
-	mov	scno, r0			@ syscall number (possibly new)
-	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
-	csub.a	scno, #__NR_syscalls		@ check upper syscall limit
-	bea	2b
-	ldm	(r0 - r3), [r1]+		@ have to reload r0 - r3
-	ldw	pc, [tbl+], scno << #2		@ call sys_* routine
-
-__sys_trace_return:
-	stw.w	r0, [sp+], #S_R0 + S_OFF	@ save returned r0
-	mov	r2, scno
-	mov	r1, sp
-	mov	r0, #1				@ trace exit [IP = 1]
-	b.l	syscall_trace
-	b	ret_slow_syscall
-
-	.align	5
-#ifdef CONFIG_ALIGNMENT_TRAP
-	.type	__cr_alignment, #object
-__cr_alignment:
-	.word	cr_alignment
-#endif
-	.ltorg
-
-ENTRY(sys_rt_sigreturn)
-		add	r0, sp, #S_OFF
-		mov	why, #0		@ prevent syscall restart handling
-		b	__sys_rt_sigreturn
-ENDPROC(sys_rt_sigreturn)
-
-	__INIT
-
-/*
- * Vector stubs.
- *
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's.  Note that this code must not
- * exceed 0x300 bytes.
- *
- * Common stub entry macro:
- *   Enter in INTR mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
- *
- * SP points to a minimal amount of processor-private memory, the address
- * of which is copied into r0 for the mode specific abort handler.
- */
-	.macro	vector_stub, name, mode
-	.align	5
-
-vector_\name:
-	@
-	@ Save r0, lr_<exception> (parent PC) and bsr_<exception>
-	@ (parent ASR)
-	@
-	stw	r0, [sp]
-	stw	lr, [sp+], #4		@ save r0, lr
-	mov	lr, bsr
-	stw	lr, [sp+], #8		@ save bsr
-
-	@
-	@ Prepare for PRIV mode.  INTRs remain disabled.
-	@
-	mov	r0, asr
-	xor	r0, r0, #(\mode ^ PRIV_MODE)
-	mov.a	bsr, r0
-
-	@
-	@ the branch table must immediately follow this code
-	@
-	and	lr, lr, #0x03
-	add	lr, lr, #1
-	mov	r0, sp
-	ldw	lr, [pc+], lr << #2
-	mov.a	pc, lr			@ branch to handler in PRIV mode
-ENDPROC(vector_\name)
-	.align	2
-	@ handler addresses follow this label
-	.endm
-
-	.globl	__stubs_start
-__stubs_start:
-/*
- * Interrupt dispatcher
- */
-	vector_stub	intr, INTR_MODE
-
-	.long	__intr_user			@  0  (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2
-	.long	__intr_priv			@  3  (PRIV)
-
-/*
- * Data abort dispatcher
- * Enter in ABT mode, bsr = USER ASR, lr = USER PC
- */
-	vector_stub	dabt, ABRT_MODE
-
-	.long	__dabt_user			@  0  (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2  (INTR)
-	.long	__dabt_priv			@  3  (PRIV)
-
-/*
- * Prefetch abort dispatcher
- * Enter in ABT mode, bsr = USER ASR, lr = USER PC
- */
-	vector_stub	pabt, ABRT_MODE
-
-	.long	__pabt_user			@  0 (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2 (INTR)
-	.long	__pabt_priv			@  3 (PRIV)
-
-/*
- * Undef instr entry dispatcher
- * Enter in EXTN mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
- */
-	vector_stub	extn, EXTN_MODE
-
-	.long	__extn_user			@  0 (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2 (INTR)
-	.long	__extn_priv			@  3 (PRIV)
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
-	.align	5
-
-.LCvswi:
-	.word	vector_swi
-
-	.globl	__stubs_end
-__stubs_end:
-
-	.equ	stubs_offset, __vectors_start + 0x200 - __stubs_start
-
-	.globl	__vectors_start
-__vectors_start:
-	jepriv	SYS_ERROR0
-	b	vector_extn + stubs_offset
-	ldw	pc, .LCvswi + stubs_offset
-	b	vector_pabt + stubs_offset
-	b	vector_dabt + stubs_offset
-	jepriv	SYS_ERROR0
-	b	vector_intr + stubs_offset
-	jepriv	SYS_ERROR0
-
-	.globl	__vectors_end
-__vectors_end:
-
-	.data
-
-	.globl	cr_alignment
-	.globl	cr_no_alignment
-cr_alignment:
-	.space	4
-cr_no_alignment:
-	.space	4
diff --git a/arch/unicore32/kernel/fpu-ucf64.c b/arch/unicore32/kernel/fpu-ucf64.c
deleted file mode 100644
index 85f0af29d29b..000000000000
--- a/arch/unicore32/kernel/fpu-ucf64.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/fpu-ucf64.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <linux/init.h>
-
-#include <asm/fpu-ucf64.h>
-
-/*
- * A special flag to tell the normalisation code not to normalise.
- */
-#define F64_NAN_FLAG	0x100
-
-/*
- * A bit pattern used to indicate the initial (unset) value of the
- * exception mask, in case nothing handles an instruction.  This
- * doesn't include the NAN flag, which get masked out before
- * we check for an error.
- */
-#define F64_EXCEPTION_ERROR	((u32)-1 & ~F64_NAN_FLAG)
-
-/*
- * Since we aren't building with -mfpu=f64, we need to code
- * these instructions using their MRC/MCR equivalents.
- */
-#define f64reg(_f64_) #_f64_
-
-#define cff(_f64_) ({			\
-	u32 __v;			\
-	asm("cff %0, " f64reg(_f64_) "@ fmrx	%0, " #_f64_	\
-	    : "=r" (__v) : : "cc");	\
-	__v;				\
-	})
-
-#define ctf(_f64_, _var_)		\
-	asm("ctf %0, " f64reg(_f64_) "@ fmxr	" #_f64_ ", %0"	\
-	   : : "r" (_var_) : "cc")
-
-/*
- * Raise a SIGFPE for the current process.
- * sicode describes the signal being raised.
- */
-void ucf64_raise_sigfpe(struct pt_regs *regs)
-{
-	/*
-	 * This is the same as NWFPE, because it's not clear what
-	 * this is used for
-	 */
-	current->thread.error_code = 0;
-	current->thread.trap_no = 6;
-
-	send_sig_fault(SIGFPE, FPE_FLTUNK,
-		       (void __user *)(instruction_pointer(regs) - 4),
-		       current);
-}
-
-/*
- * Handle exceptions of UniCore-F64.
- */
-void ucf64_exchandler(u32 inst, u32 fpexc, struct pt_regs *regs)
-{
-	u32 tmp = fpexc;
-	u32 exc = F64_EXCEPTION_ERROR & fpexc;
-
-	pr_debug("UniCore-F64: instruction %08x fpscr %08x\n",
-			inst, fpexc);
-
-	if (exc & FPSCR_CMPINSTR_BIT) {
-		if (exc & FPSCR_CON)
-			tmp |= FPSCR_CON;
-		else
-			tmp &= ~(FPSCR_CON);
-		exc &= ~(FPSCR_CMPINSTR_BIT | FPSCR_CON);
-	} else {
-		pr_debug("UniCore-F64 Error: unhandled exceptions\n");
-		pr_debug("UniCore-F64 FPSCR 0x%08x INST 0x%08x\n",
-				cff(FPSCR), inst);
-
-		ucf64_raise_sigfpe(regs);
-		return;
-	}
-
-	/*
-	 * Update the FPSCR with the additional exception flags.
-	 * Comparison instructions always return at least one of
-	 * these flags set.
-	 */
-	tmp &= ~(FPSCR_TRAP | FPSCR_IOS | FPSCR_OFS | FPSCR_UFS |
-			FPSCR_IXS | FPSCR_HIS | FPSCR_IOC | FPSCR_OFC |
-			FPSCR_UFC | FPSCR_IXC | FPSCR_HIC);
-
-	tmp |= exc;
-	ctf(FPSCR, tmp);
-}
-
-/*
- * F64 support code initialisation.
- */
-static int __init ucf64_init(void)
-{
-	ctf(FPSCR, 0x0);     /* FPSCR_UFE | FPSCR_NDE perhaps better */
-
-	printk(KERN_INFO "Enable UniCore-F64 support.\n");
-
-	return 0;
-}
-
-late_initcall(ucf64_init);
diff --git a/arch/unicore32/kernel/gpio.c b/arch/unicore32/kernel/gpio.c
deleted file mode 100644
index 36d395b54b7c..000000000000
--- a/arch/unicore32/kernel/gpio.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/gpio.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-/* in FPGA, no GPIO support */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio/driver.h>
-/* FIXME: needed for gpio_set_value() - convert to use descriptors or hogs */
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_LEDS
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-static const struct gpio_led puv3_gpio_leds[] = {
-	{ .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0,
-		.default_trigger = "heartbeat",	},
-	{ .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1,
-		.default_trigger = "disk-activity", },
-};
-
-static const struct gpio_led_platform_data puv3_gpio_led_data = {
-	.num_leds =	ARRAY_SIZE(puv3_gpio_leds),
-	.leds =		(void *) puv3_gpio_leds,
-};
-
-static struct platform_device puv3_gpio_gpio_leds = {
-	.name =		"leds-gpio",
-	.id =		-1,
-	.dev = {
-		.platform_data = (void *) &puv3_gpio_led_data,
-	}
-};
-
-static int __init puv3_gpio_leds_init(void)
-{
-	platform_device_register(&puv3_gpio_gpio_leds);
-	return 0;
-}
-
-device_initcall(puv3_gpio_leds_init);
-#endif
-
-static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	return !!(readl(GPIO_GPLR) & GPIO_GPIO(offset));
-}
-
-static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (value)
-		writel(GPIO_GPIO(offset), GPIO_GPSR);
-	else
-		writel(GPIO_GPIO(offset), GPIO_GPCR);
-}
-
-static int puv3_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	writel(readl(GPIO_GPDR) & ~GPIO_GPIO(offset), GPIO_GPDR);
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int puv3_direction_output(struct gpio_chip *chip, unsigned offset,
-		int value)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	puv3_gpio_set(chip, offset, value);
-	writel(readl(GPIO_GPDR) | GPIO_GPIO(offset), GPIO_GPDR);
-	local_irq_restore(flags);
-	return 0;
-}
-
-static struct gpio_chip puv3_gpio_chip = {
-	.label			= "gpio",
-	.direction_input	= puv3_direction_input,
-	.direction_output	= puv3_direction_output,
-	.set			= puv3_gpio_set,
-	.get			= puv3_gpio_get,
-	.base			= 0,
-	.ngpio			= GPIO_MAX + 1,
-};
-
-void __init puv3_init_gpio(void)
-{
-	writel(GPIO_DIR, GPIO_GPDR);
-#if	defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)	\
-	|| defined(CONFIG_PUV3_DB0913)
-	gpio_set_value(GPO_WIFI_EN, 1);
-	gpio_set_value(GPO_HDD_LED, 1);
-	gpio_set_value(GPO_VGA_EN, 1);
-	gpio_set_value(GPO_LCD_EN, 1);
-	gpio_set_value(GPO_CAM_PWR_EN, 0);
-	gpio_set_value(GPO_LCD_VCC_EN, 1);
-	gpio_set_value(GPO_SOFT_OFF, 1);
-	gpio_set_value(GPO_BT_EN, 1);
-	gpio_set_value(GPO_FAN_ON, 0);
-	gpio_set_value(GPO_SPKR, 0);
-	gpio_set_value(GPO_CPU_HEALTH, 1);
-	gpio_set_value(GPO_LAN_SEL, 1);
-/*
- * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel
- *	gpio_set_value(GPO_SET_V1, 1);
- *	gpio_set_value(GPO_SET_V2, 1);
- */
-#endif
-	gpiochip_add_data(&puv3_gpio_chip, NULL);
-}
diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S
deleted file mode 100644
index 9bbb8668f9f7..000000000000
--- a/arch/unicore32/kernel/head.S
+++ /dev/null
@@ -1,249 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/head.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/assembler.h>
-#include <asm/ptrace.h>
-#include <generated/asm-offsets.h>
-#include <asm/memory.h>
-#include <asm/thread_info.h>
-#include <asm/hwdef-copro.h>
-#include <asm/pgtable-hwdef.h>
-
-#if (PHYS_OFFSET & 0x003fffff)
-#error "PHYS_OFFSET must be at an even 4MiB boundary!"
-#endif
-
-#define KERNEL_RAM_VADDR	(PAGE_OFFSET + KERNEL_IMAGE_START)
-#define KERNEL_RAM_PADDR	(PHYS_OFFSET + KERNEL_IMAGE_START)
-
-#define KERNEL_PGD_PADDR	(KERNEL_RAM_PADDR - 0x1000)
-#define KERNEL_PGD_VADDR	(KERNEL_RAM_VADDR - 0x1000)
-
-#define KERNEL_START		KERNEL_RAM_VADDR
-#define KERNEL_END		_end
-
-/*
- * swapper_pg_dir is the virtual address of the initial page table.
- * We place the page tables 4K below KERNEL_RAM_VADDR.  Therefore, we must
- * make sure that KERNEL_RAM_VADDR is correctly set.  Currently, we expect
- * the least significant 16 bits to be 0x8000, but we could probably
- * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x1000.
- */
-#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
-#error KERNEL_RAM_VADDR must start at 0xXXXX8000
-#endif
-
-	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - 0x1000
-
-/*
- * Kernel startup entry point.
- * ---------------------------
- *
- * This is normally called from the decompressor code.  The requirements
- * are: MMU = off, D-cache = off, I-cache = dont care
- *
- * This code is mostly position independent, so if you link the kernel at
- * 0xc0008000, you call this at __pa(0xc0008000).
- */
-	__HEAD
-ENTRY(stext)
-	@ set asr
-	mov	r0, #PRIV_MODE			@ ensure priv mode
-	or	r0, #PSR_R_BIT | PSR_I_BIT	@ disable irqs
-	mov.a	asr, r0
-
-	@ process identify
-	movc	r0, p0.c0, #0			@ cpuid
-	movl	r1, 0xff00ffff			@ mask
-	movl	r2, 0x4d000863			@ value
-	and	r0, r1, r0
-	cxor.a	r0, r2
-	bne	__error_p			@ invalid processor id
-
-	/*
-	 * Clear the 4K level 1 swapper page table
-	 */
-	movl	r0, #KERNEL_PGD_PADDR		@ page table address
-	mov	r1, #0
-	add	r2, r0, #0x1000
-101:	stw.w	r1, [r0]+, #4
-	stw.w	r1, [r0]+, #4
-	stw.w	r1, [r0]+, #4
-	stw.w	r1, [r0]+, #4
-	cxor.a	r0, r2
-	bne	101b
-
-	movl	r4, #KERNEL_PGD_PADDR		@ page table address
-	mov	r7, #PMD_TYPE_SECT | PMD_PRESENT	@ page size: section
-	or	r7, r7, #PMD_SECT_CACHEABLE		@ cacheable
-	or	r7, r7, #PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC
-
-	/*
-	 * Create identity mapping for first 4MB of kernel to
-	 * cater for the MMU enable.  This identity mapping
-	 * will be removed by paging_init().  We use our current program
-	 * counter to determine corresponding section base address.
-	 */
-	mov	r6, pc
-	mov	r6, r6 >> #22			@ start of kernel section
-	or	r1, r7, r6 << #22		@ flags + kernel base
-	stw	r1, [r4+], r6 << #2		@ identity mapping
-
-	/*
-	 * Now setup the pagetables for our kernel direct
-	 * mapped region.
-	 */
-	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 20
-	stw.w	r1, [r0+], #(KERNEL_START & 0x00c00000) >> 20
-	movl	r6, #(KERNEL_END - 1)
-	add	r0, r0, #4
-	add	r6, r4, r6 >> #20
-102:	csub.a	r0, r6
-	add	r1, r1, #1 << 22
-	bua	103f
-	stw.w	r1, [r0]+, #4
-	b	102b
-103:
-	/*
-	 * Then map first 4MB of ram in case it contains our boot params.
-	 */
-	add	r0, r4, #PAGE_OFFSET >> 20
-	or	r6, r7, #(PHYS_OFFSET & 0xffc00000)
-	stw	r6, [r0]
-
-	ldw	r15, __switch_data		@ address to jump to after
-
-	/*
-	 * Initialise TLB, Caches, and MMU state ready to switch the MMU
-	 * on.
-	 */
-	mov	r0, #0
-	movc	p0.c5, r0, #28			@ cache invalidate all
-	nop8
-	movc	p0.c6, r0, #6			@ TLB invalidate all
-	nop8
-
-	/*
-	 * ..V. .... ..TB IDAM
-	 * ..1. .... ..01 1111
-	 */
-	movl	r0, #0x201f			@ control register setting
-
-	/*
-	 * Setup common bits before finally enabling the MMU.  Essentially
-	 * this is just loading the page table pointer and domain access
-	 * registers.
-	 */
-	#ifndef CONFIG_ALIGNMENT_TRAP
-		andn	r0, r0, #CR_A
-	#endif
-	#ifdef CONFIG_CPU_DCACHE_DISABLE
-		andn	r0, r0, #CR_D
-	#endif
-	#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		andn	r0, r0, #CR_B
-	#endif
-	#ifdef CONFIG_CPU_ICACHE_DISABLE
-		andn	r0, r0, #CR_I
-	#endif
-
-	movc	p0.c2, r4, #0			@ set pgd
-	b	__turn_mmu_on
-ENDPROC(stext)
-
-/*
- * Enable the MMU.  This completely changes the structure of the visible
- * memory space.  You will not be able to trace execution through this.
- *
- *  r0  = cp#0 control register
- *  r15 = *virtual* address to jump to upon completion
- */
-	.align	5
-__turn_mmu_on:
-	mov	r0, r0
-	movc	p0.c1, r0, #0			@ write control reg
-	nop					@ fetch inst by phys addr
-	mov	pc, r15
-	nop8					@ fetch inst by phys addr
-ENDPROC(__turn_mmu_on)
-
-/*
- * Setup the initial page tables.  We only setup the barest
- * amount which are required to get the kernel running, which
- * generally means mapping in the kernel code.
- *
- * r9  = cpuid
- * r10 = procinfo
- *
- * Returns:
- *  r0, r3, r6, r7 corrupted
- *  r4 = physical page table address
- */
-	.ltorg
-
-	.align	2
-	.type	__switch_data, %object
-__switch_data:
-	.long	__mmap_switched
-	.long	__bss_start			@ r6
-	.long	_end				@ r7
-	.long	cr_alignment			@ r8
-	.long	init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- *
- *  r0  = cp#0 control register
- */
-__mmap_switched:
-	adr	r3, __switch_data + 4
-
-	ldm.w	(r6, r7, r8), [r3]+
-	ldw	sp, [r3]
-
-	mov	fp, #0				@ Clear BSS (and zero fp)
-203:	csub.a	r6, r7
-	bea	204f
-	stw.w	fp, [r6]+,#4
-	b	203b
-204:
-	andn	r1, r0, #CR_A			@ Clear 'A' bit
-	stm	(r0, r1), [r8]+			@ Save control register values
-	b	start_kernel
-ENDPROC(__mmap_switched)
-
-/*
- * Exception handling.  Something went wrong and we can't proceed.  We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-	adr	r0, str_p1
-	b.l	printascii
-	mov	r0, r9
-	b.l	printhex8
-	adr	r0, str_p2
-	b.l	printascii
-901:	nop8
-	b	901b
-str_p1:	.asciz	"\nError: unrecognized processor variant (0x"
-str_p2:	.asciz	").\n"
-	.align
-#endif
-ENDPROC(__error_p)
-
diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c
deleted file mode 100644
index 4cdf3c846a2d..000000000000
--- a/arch/unicore32/kernel/hibernate.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/unicore32/kernel/hibernate.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/gfp.h>
-#include <linux/suspend.h>
-#include <linux/memblock.h>
-#include <linux/pgtable.h>
-
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/sections.h>
-#include <asm/suspend.h>
-
-#include "mach/pm.h"
-
-/* Pointer to the temporary resume page tables */
-pgd_t *resume_pg_dir;
-
-struct swsusp_arch_regs swsusp_arch_regs_cpu0;
-
-/*
- * Create a middle page table on a resume-safe page and put a pointer to it in
- * the given global directory entry.  This only returns the gd entry
- * in non-PAE compilation mode, since the middle layer is folded.
- */
-static pmd_t *resume_one_md_table_init(pgd_t *pgd)
-{
-	pud_t *pud;
-	p4d_t *p4d;
-	pmd_t *pmd_table;
-
-	p4d = p4d_offset(pgd, 0);
-	pud = pud_offset(p4d, 0);
-	pmd_table = pmd_offset(pud, 0);
-
-	return pmd_table;
-}
-
-/*
- * Create a page table on a resume-safe page and place a pointer to it in
- * a middle page directory entry.
- */
-static pte_t *resume_one_page_table_init(pmd_t *pmd)
-{
-	if (pmd_none(*pmd)) {
-		pte_t *page_table = (pte_t *)get_safe_page(GFP_ATOMIC);
-		if (!page_table)
-			return NULL;
-
-		set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_KERNEL_TABLE));
-
-		BUG_ON(page_table != pte_offset_kernel(pmd, 0));
-
-		return page_table;
-	}
-
-	return pte_offset_kernel(pmd, 0);
-}
-
-/*
- * This maps the physical memory to kernel virtual address space, a total
- * of max_low_pfn pages, by creating page tables starting from address
- * PAGE_OFFSET.  The page tables are allocated out of resume-safe pages.
- */
-static int resume_physical_mapping_init(pgd_t *pgd_base)
-{
-	unsigned long pfn;
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int pgd_idx, pmd_idx;
-
-	pgd_idx = pgd_index(PAGE_OFFSET);
-	pgd = pgd_base + pgd_idx;
-	pfn = 0;
-
-	for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
-		pmd = resume_one_md_table_init(pgd);
-		if (!pmd)
-			return -ENOMEM;
-
-		if (pfn >= max_low_pfn)
-			continue;
-
-		for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD; pmd++, pmd_idx++) {
-			pte_t *max_pte;
-
-			if (pfn >= max_low_pfn)
-				break;
-
-			/* Map with normal page tables.
-			 * NOTE: We can mark everything as executable here
-			 */
-			pte = resume_one_page_table_init(pmd);
-			if (!pte)
-				return -ENOMEM;
-
-			max_pte = pte + PTRS_PER_PTE;
-			for (; pte < max_pte; pte++, pfn++) {
-				if (pfn >= max_low_pfn)
-					break;
-
-				set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
-			}
-		}
-	}
-
-	return 0;
-}
-
-static inline void resume_init_first_level_page_table(pgd_t *pg_dir)
-{
-}
-
-int swsusp_arch_resume(void)
-{
-	int error;
-
-	resume_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
-	if (!resume_pg_dir)
-		return -ENOMEM;
-
-	resume_init_first_level_page_table(resume_pg_dir);
-	error = resume_physical_mapping_init(resume_pg_dir);
-	if (error)
-		return error;
-
-	/* We have got enough memory and from now on we cannot recover */
-	restore_image(resume_pg_dir, restore_pblist);
-	return 0;
-}
-
-/*
- *	pfn_is_nosave - check if given pfn is in the 'nosave' section
- */
-
-int pfn_is_nosave(unsigned long pfn)
-{
-	unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
-	unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
-
-	return (pfn >= begin_pfn) && (pfn < end_pfn);
-}
-
-void save_processor_state(void)
-{
-}
-
-void restore_processor_state(void)
-{
-	local_flush_tlb_all();
-}
diff --git a/arch/unicore32/kernel/hibernate_asm.S b/arch/unicore32/kernel/hibernate_asm.S
deleted file mode 100644
index a589bc189e24..000000000000
--- a/arch/unicore32/kernel/hibernate_asm.S
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/hibernate_asm.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <linux/pgtable.h>
-#include <generated/asm-offsets.h>
-#include <asm/page.h>
-#include <asm/assembler.h>
-
-@ restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist)
-@ r0: resume_pg_dir
-@ r1: restore_pblist
-@ copy restore_pblist pages
-@ restore registers from swsusp_arch_regs_cpu0
-@
-ENTRY(restore_image)
-	sub	r0, r0, #PAGE_OFFSET
-	mov	r5, #0
-	movc	p0.c6, r5, #6	@invalidate ITLB & DTLB
-	movc	p0.c2, r0, #0
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	.p2align 4,,7
-101:
-	csub.a	r1, #0
-	beq	109f
-
-	ldw	r6, [r1+], #PBE_ADDRESS
-	ldw	r7, [r1+], #PBE_ORIN_ADDRESS
-
-	movl	ip, #128
-102:	ldm.w	(r8 - r15), [r6]+
-	stm.w	(r8 - r15), [r7]+
-	sub.a	ip, ip, #1
-	bne	102b
-
-	ldw	r1, [r1+], #PBE_NEXT
-	b	101b
-
-	.p2align 4,,7
-109:
-	/* go back to the original page tables */
-	ldw	r0, =swapper_pg_dir
-	sub	r0, r0, #PAGE_OFFSET
-	mov	r5, #0
-	movc	p0.c6, r5, #6
-	movc	p0.c2, r0, #0
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_FPSTATE
-	lfm.w	(f0  - f7 ), [ip]+
-	lfm.w	(f8  - f15), [ip]+
-	lfm.w	(f16 - f23), [ip]+
-	lfm.w	(f24 - f31), [ip]+
-	ldw	r4, [ip]
-	ctf	r4, s31
-#endif
-	mov	r0, #0x0
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_CPU
-	ldm.w	(r4 - r15), [ip]+
-	ldm	(r16 - r27, sp, pc), [ip]+	@ Load all regs saved previously
-
-	.align	2
-1:	.long	swsusp_arch_regs_cpu0
-
-
-@ swsusp_arch_suspend()
-@ - prepare pc for resume, return from function without swsusp_save on resume
-@ - save registers in swsusp_arch_regs_cpu0
-@ - call swsusp_save write suspend image
-
-ENTRY(swsusp_arch_suspend)
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_CPU
-	stm.w	(r4 - r15), [ip]+
-	stm.w	(r16 - r27, sp, lr), [ip]+
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_FPSTATE
-	sfm.w	(f0  - f7 ), [ip]+
-	sfm.w	(f8  - f15), [ip]+
-	sfm.w	(f16 - f23), [ip]+
-	sfm.w	(f24 - f31), [ip]+
-	cff	r4, s31
-	stw	r4, [ip]
-#endif
-	b	swsusp_save			@ no return
-
-1:	.long	swsusp_arch_regs_cpu0
diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c
deleted file mode 100644
index c014ae3c3e48..000000000000
--- a/arch/unicore32/kernel/irq.c
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/irq.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/kallsyms.h>
-#include <linux/proc_fs.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-
-#include "setup.h"
-
-/*
- * PKUnity GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-static int GPIO_IRQ_mask = 0;
-
-#define GPIO_MASK(irq)		(1 << (irq - IRQ_GPIO0))
-
-static int puv3_gpio_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int mask;
-
-	if (d->irq < IRQ_GPIOHIGH)
-		mask = 1 << d->irq;
-	else
-		mask = GPIO_MASK(d->irq);
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-			return 0;
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= mask;
-	else
-		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= mask;
-	else
-		GPIO_IRQ_falling_edge &= ~mask;
-
-	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
-	return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.  This is for IRQs from 0 to 7.
- */
-static void puv3_low_gpio_ack(struct irq_data *d)
-{
-	writel((1 << d->irq), GPIO_GEDR);
-}
-
-static void puv3_low_gpio_mask(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_low_gpio_unmask(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		writel(readl(PM_PWER) | (1 << d->irq), PM_PWER);
-	else
-		writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER);
-	return 0;
-}
-
-static struct irq_chip puv3_low_gpio_chip = {
-	.name		= "GPIO-low",
-	.irq_ack	= puv3_low_gpio_ack,
-	.irq_mask	= puv3_low_gpio_mask,
-	.irq_unmask	= puv3_low_gpio_unmask,
-	.irq_set_type	= puv3_gpio_type,
-	.irq_set_wake	= puv3_low_gpio_wake,
-};
-
-/*
- * IRQ8 (GPIO0 through 27) handler.  We enter here with the
- * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
- * and call the handler.
- */
-static void puv3_gpio_handler(struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = readl(GPIO_GEDR);
-	do {
-		/*
-		 * clear down all currently active IRQ sources.
-		 * We will be processing them all.
-		 */
-		writel(mask, GPIO_GEDR);
-
-		irq = IRQ_GPIO0;
-		do {
-			if (mask & 1)
-				generic_handle_irq(irq);
-			mask >>= 1;
-			irq++;
-		} while (mask);
-		mask = readl(GPIO_GEDR);
-	} while (mask);
-}
-
-/*
- * GPIO0-27 edge IRQs need to be handled specially.
- * In addition, the IRQs are all collected up into one bit in the
- * interrupt controller registers.
- */
-static void puv3_high_gpio_ack(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	writel(mask, GPIO_GEDR);
-}
-
-static void puv3_high_gpio_mask(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	GPIO_IRQ_mask &= ~mask;
-
-	writel(readl(GPIO_GRER) & ~mask, GPIO_GRER);
-	writel(readl(GPIO_GFER) & ~mask, GPIO_GFER);
-}
-
-static void puv3_high_gpio_unmask(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	GPIO_IRQ_mask |= mask;
-
-	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-}
-
-static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER);
-	else
-		writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER);
-	return 0;
-}
-
-static struct irq_chip puv3_high_gpio_chip = {
-	.name		= "GPIO-high",
-	.irq_ack	= puv3_high_gpio_ack,
-	.irq_mask	= puv3_high_gpio_mask,
-	.irq_unmask	= puv3_high_gpio_unmask,
-	.irq_set_type	= puv3_gpio_type,
-	.irq_set_wake	= puv3_high_gpio_wake,
-};
-
-/*
- * We don't need to ACK IRQs on the PKUnity unless they're GPIOs
- * this is for internal IRQs i.e. from 8 to 31.
- */
-static void puv3_mask_irq(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_unmask_irq(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
-static int puv3_set_wake(struct irq_data *d, unsigned int on)
-{
-	if (d->irq == IRQ_RTCAlarm) {
-		if (on)
-			writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER);
-		else
-			writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct irq_chip puv3_normal_chip = {
-	.name		= "PKUnity-v3",
-	.irq_ack	= puv3_mask_irq,
-	.irq_mask	= puv3_mask_irq,
-	.irq_unmask	= puv3_unmask_irq,
-	.irq_set_wake	= puv3_set_wake,
-};
-
-static struct resource irq_resource = {
-	.name	= "irqs",
-	.start	= io_v2p(PKUNITY_INTC_BASE),
-	.end	= io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
-};
-
-static struct puv3_irq_state {
-	unsigned int	saved;
-	unsigned int	icmr;
-	unsigned int	iclr;
-	unsigned int	iccr;
-} puv3_irq_state;
-
-static int puv3_irq_suspend(void)
-{
-	struct puv3_irq_state *st = &puv3_irq_state;
-
-	st->saved = 1;
-	st->icmr = readl(INTC_ICMR);
-	st->iclr = readl(INTC_ICLR);
-	st->iccr = readl(INTC_ICCR);
-
-	/*
-	 * Disable all GPIO-based interrupts.
-	 */
-	writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR);
-
-	/*
-	 * Set the appropriate edges for wakeup.
-	 */
-	writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER);
-	writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER);
-
-	/*
-	 * Clear any pending GPIO interrupts.
-	 */
-	writel(readl(GPIO_GEDR), GPIO_GEDR);
-
-	return 0;
-}
-
-static void puv3_irq_resume(void)
-{
-	struct puv3_irq_state *st = &puv3_irq_state;
-
-	if (st->saved) {
-		writel(st->iccr, INTC_ICCR);
-		writel(st->iclr, INTC_ICLR);
-
-		writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-		writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
-		writel(st->icmr, INTC_ICMR);
-	}
-}
-
-static struct syscore_ops puv3_irq_syscore_ops = {
-	.suspend	= puv3_irq_suspend,
-	.resume		= puv3_irq_resume,
-};
-
-static int __init puv3_irq_init_syscore(void)
-{
-	register_syscore_ops(&puv3_irq_syscore_ops);
-	return 0;
-}
-
-device_initcall(puv3_irq_init_syscore);
-
-void __init init_IRQ(void)
-{
-	unsigned int irq;
-
-	request_resource(&iomem_resource, &irq_resource);
-
-	/* disable all IRQs */
-	writel(0, INTC_ICMR);
-
-	/* all IRQs are IRQ, not REAL */
-	writel(0, INTC_ICLR);
-
-	/* clear all GPIO edge detects */
-	writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR);
-	writel(0, GPIO_GFER);
-	writel(0, GPIO_GRER);
-	writel(0x0FFFFFFF, GPIO_GEDR);
-
-	writel(1, INTC_ICCR);
-
-	for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
-		irq_set_chip(irq, &puv3_low_gpio_chip);
-		irq_set_handler(irq, handle_edge_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
-			0);
-	}
-
-	for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
-		irq_set_chip(irq, &puv3_normal_chip);
-		irq_set_handler(irq, handle_level_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOAUTOEN,
-			IRQ_NOPROBE);
-	}
-
-	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
-		irq_set_chip(irq, &puv3_high_gpio_chip);
-		irq_set_handler(irq, handle_edge_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
-			0);
-	}
-
-	/*
-	 * Install handler for GPIO 0-27 edge detect interrupts
-	 */
-	irq_set_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
-	irq_set_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
-
-#ifdef CONFIG_PUV3_GPIO
-	puv3_init_gpio();
-#endif
-}
-
-/*
- * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
- */
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (unlikely(irq >= nr_irqs)) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Bad IRQ%u\n", irq);
-		ack_bad_irq(irq);
-	} else {
-		generic_handle_irq(irq);
-	}
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c
deleted file mode 100644
index 731445008932..000000000000
--- a/arch/unicore32/kernel/ksyms.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/ksyms.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/in6.h>
-#include <linux/syscalls.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <asm/checksum.h>
-
-#include "ksyms.h"
-
-EXPORT_SYMBOL(find_first_bit);
-EXPORT_SYMBOL(find_first_zero_bit);
-EXPORT_SYMBOL(find_next_zero_bit);
-EXPORT_SYMBOL(find_next_bit);
-
-	/* platform dependent support */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__const_udelay);
-
-	/* string / mem functions */
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memchr);
-
-	/* user mem (segment) */
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-
-EXPORT_SYMBOL(copy_page);
-
-EXPORT_SYMBOL(raw_copy_from_user);
-EXPORT_SYMBOL(raw_copy_to_user);
-EXPORT_SYMBOL(__clear_user);
-
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umodsi3);
-
diff --git a/arch/unicore32/kernel/ksyms.h b/arch/unicore32/kernel/ksyms.h
deleted file mode 100644
index 5d2d5ba324ac..000000000000
--- a/arch/unicore32/kernel/ksyms.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __modsi3(void);
-extern void __ucmpdi2(void);
-extern void __udivsi3(void);
-extern void __umodsi3(void);
diff --git a/arch/unicore32/kernel/module.c b/arch/unicore32/kernel/module.c
deleted file mode 100644
index 67c89ef2d6ee..000000000000
--- a/arch/unicore32/kernel/module.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/module.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/moduleloader.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/gfp.h>
-
-#include <asm/sections.h>
-
-void *module_alloc(unsigned long size)
-{
-	return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
-				GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
-				__builtin_return_address(0));
-}
-
-int
-apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
-	       unsigned int relindex, struct module *module)
-{
-	Elf32_Shdr *symsec = sechdrs + symindex;
-	Elf32_Shdr *relsec = sechdrs + relindex;
-	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
-	Elf32_Rel *rel = (void *)relsec->sh_addr;
-	unsigned int i;
-
-	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
-		unsigned long loc;
-		Elf32_Sym *sym;
-		s32 offset;
-
-		offset = ELF32_R_SYM(rel->r_info);
-		if (offset < 0 || offset >
-				(symsec->sh_size / sizeof(Elf32_Sym))) {
-			printk(KERN_ERR "%s: bad relocation, "
-					"section %d reloc %d\n",
-					module->name, relindex, i);
-			return -ENOEXEC;
-		}
-
-		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
-
-		if (rel->r_offset < 0 || rel->r_offset >
-				dstsec->sh_size - sizeof(u32)) {
-			printk(KERN_ERR "%s: out of bounds relocation, "
-				"section %d reloc %d offset %d size %d\n",
-				module->name, relindex, i, rel->r_offset,
-				dstsec->sh_size);
-			return -ENOEXEC;
-		}
-
-		loc = dstsec->sh_addr + rel->r_offset;
-
-		switch (ELF32_R_TYPE(rel->r_info)) {
-		case R_UNICORE_NONE:
-			/* ignore */
-			break;
-
-		case R_UNICORE_ABS32:
-			*(u32 *)loc += sym->st_value;
-			break;
-
-		case R_UNICORE_PC24:
-		case R_UNICORE_CALL:
-		case R_UNICORE_JUMP24:
-			offset = (*(u32 *)loc & 0x00ffffff) << 2;
-			if (offset & 0x02000000)
-				offset -= 0x04000000;
-
-			offset += sym->st_value - loc;
-			if (offset & 3 ||
-			    offset <= (s32)0xfe000000 ||
-			    offset >= (s32)0x02000000) {
-				printk(KERN_ERR
-				       "%s: relocation out of range, section "
-				       "%d reloc %d sym '%s'\n", module->name,
-				       relindex, i, strtab + sym->st_name);
-				return -ENOEXEC;
-			}
-
-			offset >>= 2;
-
-			*(u32 *)loc &= 0xff000000;
-			*(u32 *)loc |= offset & 0x00ffffff;
-			break;
-
-		default:
-			printk(KERN_ERR "%s: unknown relocation: %u\n",
-			       module->name, ELF32_R_TYPE(rel->r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
deleted file mode 100644
index 0d098aa05b47..000000000000
--- a/arch/unicore32/kernel/pci.c
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pci.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  PCI bios-type initialisation for PCI machines
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-static int debug_pci;
-
-#define CONFIG_CMD(bus, devfn, where)	\
-	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 *value)
-{
-	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
-	switch (size) {
-	case 1:
-		*value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
-		break;
-	case 2:
-		*value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
-		break;
-	case 4:
-		*value = readl(PCICFG_DATA);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 value)
-{
-	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
-	switch (size) {
-	case 1:
-		writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
-			| FIELD(value, 8, (where&3)*8), PCICFG_DATA);
-		break;
-	case 2:
-		writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
-			| FIELD(value, 16, (where&2)*8), PCICFG_DATA);
-		break;
-	case 4:
-		writel(value, PCICFG_DATA);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops pci_puv3_ops = {
-	.read  = puv3_read_config,
-	.write = puv3_write_config,
-};
-
-void pci_puv3_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
-	/* config PCI bridge base */
-	writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
-
-	writel(0, PCIBRI_AHBCTL0);
-	writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
-	writel(0xFFFF0000, PCIBRI_AHBAMR0);
-	writel(0, PCIBRI_AHBTAR0);
-
-	writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
-	writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
-	writel(0xFFFF0000, PCIBRI_AHBAMR1);
-	writel(0x00000000, PCIBRI_AHBTAR1);
-
-	writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
-	writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
-	writel(0xF8000000, PCIBRI_AHBAMR2);
-	writel(0, PCIBRI_AHBTAR2);
-
-	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
-
-	writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
-	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
-	writel(0xF8000000, PCIBRI_PCIAMR0);
-	writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
-
-	writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
-}
-
-static int pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0) {
-#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
-		if      (dev->devfn == 0x00)
-			return IRQ_PCIINTA;
-		else if (dev->devfn == 0x08)
-			return IRQ_PCIINTB;
-		else if (dev->devfn == 0x10)
-			return IRQ_PCIINTC;
-		else if (dev->devfn == 0x18)
-			return IRQ_PCIINTD;
-#endif
-#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
-		if      (dev->devfn == 0x30)
-			return IRQ_PCIINTB;
-		else if (dev->devfn == 0x60)
-			return IRQ_PCIINTC;
-		else if (dev->devfn == 0x58)
-			return IRQ_PCIINTD;
-#endif
-#if	defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
-		/* only support 2 pci devices */
-		if      (dev->devfn == 0x00)
-			return IRQ_PCIINTC; /* sata */
-#endif
-	}
-	return -1;
-}
-
-/*
- * Only first 128MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init puv3_pci_adjust_zones(unsigned long max_zone_pfn)
-{
-	unsigned int sz = SZ_128M >> PAGE_SHIFT;
-
-	max_zone_pfn[ZONE_DMA] = sz;
-}
-
-/*
- * If the bus contains any of these devices, then we must not turn on
- * parity checking of any kind.
- */
-static inline int pdev_bad_for_parity(struct pci_dev *dev)
-{
-	return 0;
-}
-
-/*
- * pcibios_fixup_bus - Called after each bus is probed,
- * but before its children are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	u16 features = PCI_COMMAND_SERR
-		| PCI_COMMAND_PARITY
-		| PCI_COMMAND_FAST_BACK;
-
-	bus->resource[0] = &ioport_resource;
-	bus->resource[1] = &iomem_resource;
-
-	/*
-	 * Walk the devices on this bus, working out what we can
-	 * and can't support.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 status;
-
-		pci_read_config_word(dev, PCI_STATUS, &status);
-
-		/*
-		 * If any device on this bus does not support fast back
-		 * to back transfers, then the bus as a whole is not able
-		 * to support them.  Having fast back to back transfers
-		 * on saves us one PCI cycle per transaction.
-		 */
-		if (!(status & PCI_STATUS_FAST_BACK))
-			features &= ~PCI_COMMAND_FAST_BACK;
-
-		if (pdev_bad_for_parity(dev))
-			features &= ~(PCI_COMMAND_SERR
-					| PCI_COMMAND_PARITY);
-
-		switch (dev->class >> 8) {
-		case PCI_CLASS_BRIDGE_PCI:
-			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
-			status |= PCI_BRIDGE_CTL_PARITY
-				| PCI_BRIDGE_CTL_MASTER_ABORT;
-			status &= ~(PCI_BRIDGE_CTL_BUS_RESET
-				| PCI_BRIDGE_CTL_FAST_BACK);
-			pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
-			break;
-
-		case PCI_CLASS_BRIDGE_CARDBUS:
-			pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-					&status);
-			status |= PCI_CB_BRIDGE_CTL_PARITY
-				| PCI_CB_BRIDGE_CTL_MASTER_ABORT;
-			pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-					status);
-			break;
-		}
-	}
-
-	/*
-	 * Now walk the devices again, this time setting them up.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 cmd;
-
-		pci_read_config_word(dev, PCI_COMMAND, &cmd);
-		cmd |= features;
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-				      L1_CACHE_BYTES >> 2);
-	}
-
-	/*
-	 * Propagate the flags to the PCI bridge.
-	 */
-	if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		if (features & PCI_COMMAND_FAST_BACK)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
-		if (features & PCI_COMMAND_PARITY)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
-	}
-
-	/*
-	 * Report what we did for this bus
-	 */
-	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
-		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
-}
-EXPORT_SYMBOL(pcibios_fixup_bus);
-
-static struct resource busn_resource = {
-	.name	= "PCI busn",
-	.start	= 0,
-	.end	= 255,
-	.flags	= IORESOURCE_BUS,
-};
-
-static int __init pci_common_init(void)
-{
-	struct pci_bus *puv3_bus;
-	struct pci_host_bridge *bridge;
-	int ret;
-
-	bridge = pci_alloc_host_bridge(0);
-	if (!bridge)
-		return -ENOMEM;
-
-	pci_puv3_preinit();
-
-	pci_add_resource(&bridge->windows, &ioport_resource);
-	pci_add_resource(&bridge->windows, &iomem_resource);
-	pci_add_resource(&bridge->windows, &busn_resource);
-	bridge->sysdata = NULL;
-	bridge->busnr = 0;
-	bridge->ops = &pci_puv3_ops;
-	bridge->swizzle_irq = pci_common_swizzle;
-	bridge->map_irq = pci_puv3_map_irq;
-
-	/* Scan our single hose.  */
-	ret = pci_scan_root_bus_bridge(bridge);
-	if (ret) {
-		pci_free_host_bridge(bridge);
-		return;
-	}
-
-	puv3_bus = bridge->bus;
-
-	if (!puv3_bus)
-		panic("PCI: unable to scan bus!");
-
-	pci_bus_size_bridges(puv3_bus);
-	pci_bus_assign_resources(puv3_bus);
-	pci_bus_add_devices(puv3_bus);
-	return 0;
-}
-subsys_initcall(pci_common_init);
-
-char * __init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "debug")) {
-		debug_pci = 1;
-		return NULL;
-	}
-	return str;
-}
-
-void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-/*
- * From arch/i386/kernel/pci-i386.c:
- *
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might be mirrored at 0x0100-0x03ff..
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO && start & 0x300)
-		start = (start + 0x3ff) & ~0x3ff;
-
-	start = (start + align - 1) & ~(align - 1);
-
-	return start;
-}
-
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	/*
-	 * Bridges (eg, cardbus bridges) need to be fully enabled
-	 */
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
-		cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
-	if (cmd != old_cmd) {
-		printk("PCI: enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
diff --git a/arch/unicore32/kernel/pm.c b/arch/unicore32/kernel/pm.c
deleted file mode 100644
index 94b7f9df6c1a..000000000000
--- a/arch/unicore32/kernel/pm.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pm.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-
-#include "setup.h"
-
-struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
-static unsigned long *sleep_save;
-
-int puv3_pm_enter(suspend_state_t state)
-{
-	unsigned long sleep_save_checksum = 0, checksum = 0;
-	int i;
-
-	/* skip registers saving for standby */
-	if (state != PM_SUSPEND_STANDBY) {
-		puv3_cpu_pm_fns->save(sleep_save);
-		/* before sleeping, calculate and save a checksum */
-		for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
-			sleep_save_checksum += sleep_save[i];
-	}
-
-	/* *** go zzz *** */
-	puv3_cpu_pm_fns->enter(state);
-	cpu_init();
-#ifdef CONFIG_INPUT_KEYBOARD
-	puv3_ps2_init();
-#endif
-#ifdef CONFIG_PCI
-	pci_puv3_preinit();
-#endif
-	if (state != PM_SUSPEND_STANDBY) {
-		/* after sleeping, validate the checksum */
-		for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
-			checksum += sleep_save[i];
-
-		/* if invalid, display message and wait for a hardware reset */
-		if (checksum != sleep_save_checksum) {
-			while (1)
-				puv3_cpu_pm_fns->enter(state);
-		}
-		puv3_cpu_pm_fns->restore(sleep_save);
-	}
-
-	pr_debug("*** made it back from resume\n");
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(puv3_pm_enter);
-
-unsigned long sleep_phys_sp(void *sp)
-{
-	return virt_to_phys(sp);
-}
-
-static int puv3_pm_valid(suspend_state_t state)
-{
-	if (puv3_cpu_pm_fns)
-		return puv3_cpu_pm_fns->valid(state);
-
-	return -EINVAL;
-}
-
-static int puv3_pm_prepare(void)
-{
-	int ret = 0;
-
-	if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->prepare)
-		ret = puv3_cpu_pm_fns->prepare();
-
-	return ret;
-}
-
-static void puv3_pm_finish(void)
-{
-	if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->finish)
-		puv3_cpu_pm_fns->finish();
-}
-
-static struct platform_suspend_ops puv3_pm_ops = {
-	.valid		= puv3_pm_valid,
-	.enter		= puv3_pm_enter,
-	.prepare	= puv3_pm_prepare,
-	.finish		= puv3_pm_finish,
-};
-
-static int __init puv3_pm_init(void)
-{
-	if (!puv3_cpu_pm_fns) {
-		printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n");
-		return -EINVAL;
-	}
-
-	sleep_save = kmalloc_array(puv3_cpu_pm_fns->save_count,
-				   sizeof(unsigned long),
-				   GFP_KERNEL);
-	if (!sleep_save) {
-		printk(KERN_ERR "failed to alloc memory for pm save\n");
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&puv3_pm_ops);
-	return 0;
-}
-
-device_initcall(puv3_pm_init);
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
deleted file mode 100644
index b4fd3a604a18..000000000000
--- a/arch/unicore32/kernel/process.c
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/process.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <stdarg.h>
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/elfcore.h>
-#include <linux/pm.h>
-#include <linux/tick.h>
-#include <linux/utsname.h>
-#include <linux/uaccess.h>
-#include <linux/random.h>
-#include <linux/gpio.h>
-#include <linux/stacktrace.h>
-
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/stacktrace.h>
-
-#include "setup.h"
-
-static const char * const processor_modes[] = {
-	"UK00", "UK01", "UK02", "UK03", "UK04", "UK05", "UK06", "UK07",
-	"UK08", "UK09", "UK0A", "UK0B", "UK0C", "UK0D", "UK0E", "UK0F",
-	"USER", "REAL", "INTR", "PRIV", "UK14", "UK15", "UK16", "ABRT",
-	"UK18", "UK19", "UK1A", "EXTN", "UK1C", "UK1D", "UK1E", "SUSR"
-};
-
-void arch_cpu_idle(void)
-{
-	cpu_do_idle();
-	local_irq_enable();
-}
-
-void machine_halt(void)
-{
-	gpio_set_value(GPO_SOFT_OFF, 0);
-}
-
-/*
- * Function pointers to optional machine specific functions
- */
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-void machine_power_off(void)
-{
-	if (pm_power_off)
-		pm_power_off();
-	machine_halt();
-}
-
-void machine_restart(char *cmd)
-{
-	/* Disable interrupts first */
-	local_irq_disable();
-
-	/*
-	 * Tell the mm system that we are going to reboot -
-	 * we may need it to insert some 1:1 mappings so that
-	 * soft boot works.
-	 */
-	setup_mm_for_reboot();
-
-	/* Clean and invalidate caches */
-	flush_cache_all();
-
-	/* Turn off caching */
-	cpu_proc_fin();
-
-	/* Push out any further dirty data, and ensure cache is empty */
-	flush_cache_all();
-
-	/*
-	 * Now handle reboot code.
-	 */
-	if (reboot_mode == REBOOT_SOFT) {
-		/* Jump into ROM at address 0xffff0000 */
-		cpu_reset(VECTORS_BASE);
-	} else {
-		writel(0x00002001, PM_PLLSYSCFG); /* cpu clk = 250M */
-		writel(0x00100800, PM_PLLDDRCFG); /* ddr clk =  44M */
-		writel(0x00002001, PM_PLLVGACFG); /* vga clk = 250M */
-
-		/* Use on-chip reset capability */
-		/* following instructions must be in one icache line */
-		__asm__ __volatile__(
-			"	.align 5\n\t"
-			"	stw	%1, [%0]\n\t"
-			"201:	ldw	r0, [%0]\n\t"
-			"	cmpsub.a	r0, #0\n\t"
-			"	bne	201b\n\t"
-			"	stw	%3, [%2]\n\t"
-			"	nop; nop; nop\n\t"
-			/* prefetch 3 instructions at most */
-			:
-			: "r" (PM_PMCR),
-			  "r" (PM_PMCR_CFBSYS | PM_PMCR_CFBDDR
-				| PM_PMCR_CFBVGA),
-			  "r" (RESETC_SWRR),
-			  "r" (RESETC_SWRR_SRB)
-			: "r0", "memory");
-	}
-
-	/*
-	 * Whoops - the architecture was unable to reboot.
-	 * Tell the user!
-	 */
-	mdelay(1000);
-	printk(KERN_EMERG "Reboot failed -- System halted\n");
-	do { } while (1);
-}
-
-void __show_regs(struct pt_regs *regs)
-{
-	unsigned long flags;
-	char buf[64];
-
-	show_regs_print_info(KERN_DEFAULT);
-	printk("PC is at %pS\n", (void *)instruction_pointer(regs));
-	printk("LR is at %pS\n", (void *)regs->UCreg_lr);
-	printk(KERN_DEFAULT "pc : [<%08lx>]    lr : [<%08lx>]    psr: %08lx\n"
-	       "sp : %08lx  ip : %08lx  fp : %08lx\n",
-		regs->UCreg_pc, regs->UCreg_lr, regs->UCreg_asr,
-		regs->UCreg_sp, regs->UCreg_ip, regs->UCreg_fp);
-	printk(KERN_DEFAULT "r26: %08lx  r25: %08lx  r24: %08lx\n",
-		regs->UCreg_26, regs->UCreg_25,
-		regs->UCreg_24);
-	printk(KERN_DEFAULT "r23: %08lx  r22: %08lx  r21: %08lx  r20: %08lx\n",
-		regs->UCreg_23, regs->UCreg_22,
-		regs->UCreg_21, regs->UCreg_20);
-	printk(KERN_DEFAULT "r19: %08lx  r18: %08lx  r17: %08lx  r16: %08lx\n",
-		regs->UCreg_19, regs->UCreg_18,
-		regs->UCreg_17, regs->UCreg_16);
-	printk(KERN_DEFAULT "r15: %08lx  r14: %08lx  r13: %08lx  r12: %08lx\n",
-		regs->UCreg_15, regs->UCreg_14,
-		regs->UCreg_13, regs->UCreg_12);
-	printk(KERN_DEFAULT "r11: %08lx  r10: %08lx  r9 : %08lx  r8 : %08lx\n",
-		regs->UCreg_11, regs->UCreg_10,
-		regs->UCreg_09, regs->UCreg_08);
-	printk(KERN_DEFAULT "r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
-		regs->UCreg_07, regs->UCreg_06,
-		regs->UCreg_05, regs->UCreg_04);
-	printk(KERN_DEFAULT "r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
-		regs->UCreg_03, regs->UCreg_02,
-		regs->UCreg_01, regs->UCreg_00);
-
-	flags = regs->UCreg_asr;
-	buf[0] = flags & PSR_S_BIT ? 'S' : 's';
-	buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z';
-	buf[2] = flags & PSR_C_BIT ? 'C' : 'c';
-	buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
-	buf[4] = '\0';
-
-	printk(KERN_DEFAULT "Flags: %s  INTR o%s  REAL o%s  Mode %s  Segment %s\n",
-		buf, interrupts_enabled(regs) ? "n" : "ff",
-		fast_interrupts_enabled(regs) ? "n" : "ff",
-		processor_modes[processor_mode(regs)],
-		uaccess_kernel() ? "kernel" : "user");
-	{
-		unsigned int ctrl;
-
-		buf[0] = '\0';
-		{
-			unsigned int transbase;
-			asm("movc %0, p0.c2, #0\n"
-			    : "=r" (transbase));
-			snprintf(buf, sizeof(buf), "  Table: %08x", transbase);
-		}
-		asm("movc %0, p0.c1, #0\n" : "=r" (ctrl));
-
-		printk(KERN_DEFAULT "Control: %08x%s\n", ctrl, buf);
-	}
-}
-
-void show_regs(struct pt_regs *regs)
-{
-	printk(KERN_DEFAULT "\n");
-	printk(KERN_DEFAULT "Pid: %d, comm: %20s\n",
-			task_pid_nr(current), current->comm);
-	__show_regs(regs);
-	__backtrace();
-}
-
-void flush_thread(void)
-{
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = current;
-
-	memset(thread->used_cp, 0, sizeof(thread->used_cp));
-	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
-#ifdef CONFIG_UNICORE_FPU_F64
-	memset(&thread->fpstate, 0, sizeof(struct fp_state));
-#endif
-}
-
-void release_thread(struct task_struct *dead_task)
-{
-}
-
-asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
-
-int
-copy_thread(unsigned long clone_flags, unsigned long stack_start,
-	    unsigned long stk_sz, struct task_struct *p)
-{
-	struct thread_info *thread = task_thread_info(p);
-	struct pt_regs *childregs = task_pt_regs(p);
-
-	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
-	thread->cpu_context.sp = (unsigned long)childregs;
-	if (unlikely(p->flags & PF_KTHREAD)) {
-		thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread;
-		thread->cpu_context.r4 = stack_start;
-		thread->cpu_context.r5 = stk_sz;
-		memset(childregs, 0, sizeof(struct pt_regs));
-	} else {
-		thread->cpu_context.pc = (unsigned long)ret_from_fork;
-		*childregs = *current_pt_regs();
-		childregs->UCreg_00 = 0;
-		if (stack_start)
-			childregs->UCreg_sp = stack_start;
-
-		if (clone_flags & CLONE_SETTLS)
-			childregs->UCreg_16 = childregs->UCreg_03;
-	}
-	return 0;
-}
-
-/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
-	elf_core_copy_regs(elfregs, task_pt_regs(t));
-	return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fp)
-{
-	struct thread_info *thread = current_thread_info();
-	int used_math = thread->used_cp[1] | thread->used_cp[2];
-
-#ifdef CONFIG_UNICORE_FPU_F64
-	if (used_math)
-		memcpy(fp, &thread->fpstate, sizeof(*fp));
-#endif
-	return used_math != 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	struct stackframe frame;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	frame.fp = thread_saved_fp(p);
-	frame.sp = thread_saved_sp(p);
-	frame.lr = 0;			/* recovered from the stack */
-	frame.pc = thread_saved_pc(p);
-	do {
-		int ret = unwind_frame(&frame);
-		if (ret < 0)
-			return 0;
-		if (!in_sched_functions(frame.pc))
-			return frame.pc;
-	} while ((count++) < 16);
-	return 0;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
-	return randomize_page(mm->brk, 0x02000000);
-}
-
-/*
- * The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code.  Let's declare a mapping
- * for it so it is visible through ptrace and /proc/<pid>/mem.
- */
-
-int vectors_user_mapping(void)
-{
-	struct mm_struct *mm = current->mm;
-	return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
-				       VM_READ | VM_EXEC |
-				       VM_MAYREAD | VM_MAYEXEC |
-				       VM_DONTEXPAND | VM_DONTDUMP,
-				       NULL);
-}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
-	return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
-}
diff --git a/arch/unicore32/kernel/ptrace.c b/arch/unicore32/kernel/ptrace.c
deleted file mode 100644
index 0f216567b90a..000000000000
--- a/arch/unicore32/kernel/ptrace.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/ptrace.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * By Ross Biro 1/23/92
- */
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-#include <linux/uaccess.h>
-#include <linux/sched/task_stack.h>
-
-/*
- * this routine will get a word off of the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline long get_user_reg(struct task_struct *task, int offset)
-{
-	return task_pt_regs(task)->uregs[offset];
-}
-
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline int
-put_user_reg(struct task_struct *task, int offset, long data)
-{
-	struct pt_regs newregs, *regs = task_pt_regs(task);
-	int ret = -EINVAL;
-
-	newregs = *regs;
-	newregs.uregs[offset] = data;
-
-	if (valid_user_regs(&newregs)) {
-		regs->uregs[offset] = data;
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- */
-void ptrace_disable(struct task_struct *child)
-{
-}
-
-/*
- * We actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
-			    unsigned long __user *ret)
-{
-	unsigned long tmp;
-
-	tmp = 0;
-	if (off < sizeof(struct pt_regs))
-		tmp = get_user_reg(tsk, off >> 2);
-
-	return put_user(tmp, ret);
-}
-
-/*
- * We actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
-			     unsigned long val)
-{
-	if (off >= sizeof(struct pt_regs))
-		return 0;
-
-	return put_user_reg(tsk, off >> 2, val);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret;
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-	case PTRACE_PEEKUSR:
-		ret = ptrace_read_user(child, addr, datap);
-		break;
-
-	case PTRACE_POKEUSR:
-		ret = ptrace_write_user(child, addr, data);
-		break;
-
-	case PTRACE_GET_THREAD_AREA:
-		ret = put_user(task_pt_regs(child)->UCreg_16,
-			       datap);
-		break;
-
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-}
-
-asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
-{
-	unsigned long ip;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return scno;
-	if (!(current->ptrace & PT_PTRACED))
-		return scno;
-
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->UCreg_ip;
-	regs->UCreg_ip = why;
-
-	current_thread_info()->syscall = scno;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-	regs->UCreg_ip = ip;
-
-	return current_thread_info()->syscall;
-}
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
deleted file mode 100644
index 78f12e627365..000000000000
--- a/arch/unicore32/kernel/puv3-core.c
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/unicore32/kernel/puv3-core.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/cnt32_to_63.h>
-#include <linux/usb/musb.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/pm.h>
-
-/*
- * This is the PKUnity sched_clock implementation.  This has
- * a resolution of 271ns, and a maximum value of 32025597s (370 days).
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to this function.
- *
- *  ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v = cnt32_to_63(readl(OST_OSCR));
-
-	/* original conservative method, but overflow frequently
-	 * v *= NSEC_PER_SEC >> 12;
-	 * do_div(v, CLOCK_TICK_RATE >> 12);
-	 */
-	v = ((v & 0x7fffffffffffffffULL) * 2235) >> 5;
-
-	return v;
-}
-
-static struct resource puv3_usb_resources[] = {
-	/* order is significant! */
-	{
-		.start		= io_v2p(PKUNITY_USB_BASE),
-		.end		= io_v2p(PKUNITY_USB_BASE) + 0x3ff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_USB,
-		.flags		= IORESOURCE_IRQ,
-	}, {
-		.start		= IRQ_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct musb_hdrc_config	puv3_usb_config[] = {
-	{
-		.num_eps = 16,
-		.multipoint = 1,
-#ifdef CONFIG_USB_INVENTRA_DMA
-		.dma = 1,
-		.dma_channels = 8,
-#endif
-	},
-};
-
-static struct musb_hdrc_platform_data puv3_usb_plat = {
-	.mode		= MUSB_HOST,
-	.min_power	= 100,
-	.clock		= 0,
-	.config		= puv3_usb_config,
-};
-
-static struct resource puv3_mmc_resources[] = {
-	[0] = {
-		.start	= io_v2p(PKUNITY_SDC_BASE),
-		.end	= io_v2p(PKUNITY_SDC_BASE) + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SDC,
-		.end	= IRQ_SDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource puv3_unigfx_resources[] = {
-	[0] = {
-		.start	= io_v2p(PKUNITY_UNIGFX_BASE),
-		.end	= io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource puv3_rtc_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_RTC_BASE),
-		.end   = io_v2p(PKUNITY_RTC_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTCAlarm,
-		.end   = IRQ_RTCAlarm,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource puv3_pwm_resources[] = {
-	[0] = {
-		.start	= io_v2p(PKUNITY_OST_BASE) + 0x80,
-		.end	= io_v2p(PKUNITY_OST_BASE) + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource puv3_uart0_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_UART0_BASE),
-		.end   = io_v2p(PKUNITY_UART0_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_UART0,
-		.end   = IRQ_UART0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource puv3_uart1_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_UART1_BASE),
-		.end   = io_v2p(PKUNITY_UART1_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_UART1,
-		.end   = IRQ_UART1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource puv3_umal_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_UMAL_BASE),
-		.end   = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_UMAL,
-		.end   = IRQ_UMAL,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-#ifdef CONFIG_PUV3_PM
-
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum {
-	SLEEP_SAVE_PM_PLLDDRCFG,
-	SLEEP_SAVE_COUNT
-};
-
-
-static void puv3_cpu_pm_save(unsigned long *sleep_save)
-{
-/*	SAVE(PM_PLLDDRCFG); */
-}
-
-static void puv3_cpu_pm_restore(unsigned long *sleep_save)
-{
-/*	RESTORE(PM_PLLDDRCFG); */
-}
-
-static int puv3_cpu_pm_prepare(void)
-{
-	/* set resume return address */
-	writel(virt_to_phys(puv3_cpu_resume), PM_DIVCFG);
-	return 0;
-}
-
-static void puv3_cpu_pm_enter(suspend_state_t state)
-{
-	/* Clear reset status */
-	writel(RESETC_RSSR_HWR | RESETC_RSSR_WDR
-			| RESETC_RSSR_SMR | RESETC_RSSR_SWR, RESETC_RSSR);
-
-	switch (state) {
-/*	case PM_SUSPEND_ON:
-		puv3_cpu_idle();
-		break; */
-	case PM_SUSPEND_MEM:
-		puv3_cpu_pm_prepare();
-		puv3_cpu_suspend(PM_PMCR_SFB);
-		break;
-	}
-}
-
-static int puv3_cpu_pm_valid(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM;
-}
-
-static void puv3_cpu_pm_finish(void)
-{
-	/* ensure not to come back here if it wasn't intended */
-	/* PSPR = 0; */
-}
-
-static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.valid		= puv3_cpu_pm_valid,
-	.save		= puv3_cpu_pm_save,
-	.restore	= puv3_cpu_pm_restore,
-	.enter		= puv3_cpu_pm_enter,
-	.prepare	= puv3_cpu_pm_prepare,
-	.finish		= puv3_cpu_pm_finish,
-};
-
-static void __init puv3_init_pm(void)
-{
-	puv3_cpu_pm_fns = &puv3_cpu_pm_fnss;
-}
-#else
-static inline void puv3_init_pm(void) {}
-#endif
-
-void puv3_ps2_init(void)
-{
-	struct clk *bclk32;
-
-	bclk32 = clk_get(NULL, "BUS32_CLK");
-	writel(clk_get_rate(bclk32) / 200000, PS2_CNT); /* should > 5us */
-}
-
-void __init puv3_core_init(void)
-{
-	puv3_init_pm();
-	puv3_ps2_init();
-
-	platform_device_register_simple("PKUnity-v3-RTC", -1,
-			puv3_rtc_resources, ARRAY_SIZE(puv3_rtc_resources));
-	platform_device_register_simple("PKUnity-v3-UMAL", -1,
-			puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources));
-	platform_device_register_simple("PKUnity-v3-MMC", -1,
-			puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources));
-	platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
-			puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources));
-	platform_device_register_simple("PKUnity-v3-PWM", -1,
-			puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources));
-	platform_device_register_simple("PKUnity-v3-UART", 0,
-			puv3_uart0_resources, ARRAY_SIZE(puv3_uart0_resources));
-	platform_device_register_simple("PKUnity-v3-UART", 1,
-			puv3_uart1_resources, ARRAY_SIZE(puv3_uart1_resources));
-	platform_device_register_simple("PKUnity-v3-AC97", -1, NULL, 0);
-	platform_device_register_resndata(NULL, "musb_hdrc", -1,
-			puv3_usb_resources, ARRAY_SIZE(puv3_usb_resources),
-			&puv3_usb_plat, sizeof(puv3_usb_plat));
-}
-
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
deleted file mode 100644
index e251f5028396..000000000000
--- a/arch/unicore32/kernel/puv3-nb0916.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/puv3-nb0916.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <mach/hardware.h>
-
-static struct physmap_flash_data physmap_flash_data = {
-	.width		= 1,
-};
-
-static struct resource physmap_flash_resource = {
-	.start		= 0xFFF80000,
-	.end		= 0xFFFFFFFF,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct resource puv3_i2c_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_I2C_BASE),
-		.end   = io_v2p(PKUNITY_I2C_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_I2C,
-		.end   = IRQ_I2C,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct pwm_lookup nb0916_pwm_lookup[] = {
-	PWM_LOOKUP("PKUnity-v3-PWM", 0, "pwm-backlight", NULL, 70 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data nb0916_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-};
-
-static struct gpio_keys_button nb0916_gpio_keys[] = {
-	{
-		.type	= EV_KEY,
-		.code	= KEY_POWER,
-		.gpio	= GPI_SOFF_REQ,
-		.desc	= "Power Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= BTN_TOUCH,
-		.gpio	= GPI_BTN_TOUCH,
-		.desc	= "Touchpad Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_keys_platform_data nb0916_gpio_button_data = {
-	.buttons	= nb0916_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(nb0916_gpio_keys),
-};
-
-static irqreturn_t nb0916_lcdcaseoff_handler(int irq, void *dev_id)
-{
-	if (gpio_get_value(GPI_LCD_CASE_OFF))
-		gpio_set_value(GPO_LCD_EN, 1);
-	else
-		gpio_set_value(GPO_LCD_EN, 0);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t nb0916_overheat_handler(int irq, void *dev_id)
-{
-	machine_halt();
-	/* SYSTEM HALT, NO RETURN */
-	return IRQ_HANDLED;
-}
-
-static struct i2c_board_info __initdata puv3_i2c_devices[] = {
-	{	I2C_BOARD_INFO("lm75",		I2C_TAR_THERMAL),	},
-	{	I2C_BOARD_INFO("bq27200",	I2C_TAR_PWIC),		},
-	{	I2C_BOARD_INFO("24c02",		I2C_TAR_EEPROM),	},
-};
-
-int __init mach_nb0916_init(void)
-{
-	i2c_register_board_info(0, puv3_i2c_devices,
-			ARRAY_SIZE(puv3_i2c_devices));
-
-	platform_device_register_simple("PKUnity-v3-I2C", -1,
-			puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources));
-
-	pwm_add_table(nb0916_pwm_lookup, ARRAY_SIZE(nb0916_pwm_lookup));
-
-	platform_device_register_data(NULL, "pwm-backlight", -1,
-			&nb0916_backlight_data, sizeof(nb0916_backlight_data));
-
-	platform_device_register_data(NULL, "gpio-keys", -1,
-			&nb0916_gpio_button_data, sizeof(nb0916_gpio_button_data));
-
-	platform_device_register_resndata(NULL, "physmap-flash", -1,
-			&physmap_flash_resource, 1,
-			&physmap_flash_data, sizeof(physmap_flash_data));
-
-	if (request_irq(gpio_to_irq(GPI_LCD_CASE_OFF),
-		&nb0916_lcdcaseoff_handler,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"NB0916 lcd case off", NULL) < 0) {
-
-		printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n",
-			gpio_to_irq(GPI_LCD_CASE_OFF));
-	}
-
-	if (request_irq(gpio_to_irq(GPI_OTP_INT), &nb0916_overheat_handler,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"NB0916 overheating protection", NULL) < 0) {
-
-		printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n",
-			gpio_to_irq(GPI_OTP_INT));
-	}
-
-	return 0;
-}
-
-subsys_initcall_sync(mach_nb0916_init);
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
deleted file mode 100644
index 0c4242a5ee1d..000000000000
--- a/arch/unicore32/kernel/setup.c
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/setup.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/utsname.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/memblock.h>
-#include <linux/seq_file.h>
-#include <linux/screen_info.h>
-#include <linux/init.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/elf.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-#include <asm/memblock.h>
-
-#include "setup.h"
-
-#ifndef MEM_SIZE
-#define MEM_SIZE	(16*1024*1024)
-#endif
-
-struct stack {
-	u32 irq[3];
-	u32 abt[3];
-	u32 und[3];
-} ____cacheline_aligned;
-
-static struct stack stacks[NR_CPUS];
-
-#ifdef CONFIG_VGA_CONSOLE
-struct screen_info screen_info;
-#endif
-
-char elf_platform[ELF_PLATFORM_SIZE];
-EXPORT_SYMBOL(elf_platform);
-
-static char __initdata cmd_line[COMMAND_LINE_SIZE];
-
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-
-/*
- * Standard memory resources
- */
-static struct resource mem_res[] = {
-	{
-		.name = "Kernel code",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_SYSTEM_RAM
-	},
-	{
-		.name = "Kernel data",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_SYSTEM_RAM
-	}
-};
-
-#define kernel_code mem_res[0]
-#define kernel_data mem_res[1]
-
-/*
- * These functions re-use the assembly code in head.S, which
- * already provide the required functionality.
- */
-static void __init setup_processor(void)
-{
-	printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n",
-	       uc32_cpuid, (int)(uc32_cpuid >> 16) & 15, cr_alignment);
-
-	sprintf(init_utsname()->machine, "puv3");
-	sprintf(elf_platform, "ucv2");
-}
-
-/*
- * cpu_init - initialise one CPU.
- *
- * cpu_init sets up the per-CPU stacks.
- */
-void cpu_init(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct stack *stk = &stacks[cpu];
-
-	/*
-	 * setup stacks for re-entrant exception handlers
-	 */
-	__asm__ (
-	"mov.a	asr, %1\n\t"
-	"add	sp, %0, %2\n\t"
-	"mov.a	asr, %3\n\t"
-	"add	sp, %0, %4\n\t"
-	"mov.a	asr, %5\n\t"
-	"add	sp, %0, %6\n\t"
-	"mov.a	asr, %7"
-	    :
-	    : "r" (stk),
-	      "r" (PSR_R_BIT | PSR_I_BIT | INTR_MODE),
-	      "I" (offsetof(struct stack, irq[0])),
-	      "r" (PSR_R_BIT | PSR_I_BIT | ABRT_MODE),
-	      "I" (offsetof(struct stack, abt[0])),
-	      "r" (PSR_R_BIT | PSR_I_BIT | EXTN_MODE),
-	      "I" (offsetof(struct stack, und[0])),
-	      "r" (PSR_R_BIT | PSR_I_BIT | PRIV_MODE)
-	: "r30", "cc");
-}
-
-static int __init uc32_add_memory(unsigned long start, unsigned long size)
-{
-	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
-
-	if (meminfo.nr_banks >= NR_BANKS) {
-		printk(KERN_CRIT "NR_BANKS too low, "
-			"ignoring memory at %#lx\n", start);
-		return -EINVAL;
-	}
-
-	/*
-	 * Ensure that start/size are aligned to a page boundary.
-	 * Size is appropriately rounded down, start is rounded up.
-	 */
-	size -= start & ~PAGE_MASK;
-
-	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
-
-	/*
-	 * Check whether this memory region has non-zero size or
-	 * invalid node number.
-	 */
-	if (bank->size == 0)
-		return -EINVAL;
-
-	meminfo.nr_banks++;
-	return 0;
-}
-
-/*
- * Pick out the memory size.  We look for mem=size@start,
- * where start and size are "size[KkMm]"
- */
-static int __init early_mem(char *p)
-{
-	static int usermem __initdata = 1;
-	unsigned long size, start;
-	char *endp;
-
-	/*
-	 * If the user specifies memory size, we
-	 * blow away any automatically generated
-	 * size.
-	 */
-	if (usermem) {
-		usermem = 0;
-		meminfo.nr_banks = 0;
-	}
-
-	start = PHYS_OFFSET;
-	size  = memparse(p, &endp);
-	if (*endp == '@')
-		start = memparse(endp + 1, NULL);
-
-	uc32_add_memory(start, size);
-
-	return 0;
-}
-early_param("mem", early_mem);
-
-static void __init
-request_standard_resources(struct meminfo *mi)
-{
-	struct resource *res;
-	int i;
-
-	kernel_code.start   = virt_to_phys(_stext);
-	kernel_code.end     = virt_to_phys(_etext - 1);
-	kernel_data.start   = virt_to_phys(_sdata);
-	kernel_data.end     = virt_to_phys(_end - 1);
-
-	for (i = 0; i < mi->nr_banks; i++) {
-		if (mi->bank[i].size == 0)
-			continue;
-
-		res = memblock_alloc_low(sizeof(*res), SMP_CACHE_BYTES);
-		if (!res)
-			panic("%s: Failed to allocate %zu bytes align=%x\n",
-			      __func__, sizeof(*res), SMP_CACHE_BYTES);
-
-		res->name  = "System RAM";
-		res->start = mi->bank[i].start;
-		res->end   = mi->bank[i].start + mi->bank[i].size - 1;
-		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-
-		request_resource(&iomem_resource, res);
-
-		if (kernel_code.start >= res->start &&
-		    kernel_code.end <= res->end)
-			request_resource(res, &kernel_code);
-		if (kernel_data.start >= res->start &&
-		    kernel_data.end <= res->end)
-			request_resource(res, &kernel_data);
-	}
-}
-
-static void (*init_machine)(void) __initdata;
-
-static int __init customize_machine(void)
-{
-	/* customizes platform devices, or adds new ones */
-	if (init_machine)
-		init_machine();
-	return 0;
-}
-arch_initcall(customize_machine);
-
-void __init setup_arch(char **cmdline_p)
-{
-	char *from = default_command_line;
-
-	setup_processor();
-
-	init_mm.start_code = (unsigned long) _stext;
-	init_mm.end_code   = (unsigned long) _etext;
-	init_mm.end_data   = (unsigned long) _edata;
-	init_mm.brk	   = (unsigned long) _end;
-
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
-	/* populate cmd_line too for later use, preserving boot_command_line */
-	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = cmd_line;
-
-	parse_early_param();
-
-	uc32_memblock_init(&meminfo);
-
-	paging_init();
-	request_standard_resources(&meminfo);
-
-	cpu_init();
-
-	/*
-	 * Set up various architecture-specific pointers
-	 */
-	init_machine = puv3_core_init;
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-#endif
-#endif
-	early_trap_init();
-}
-
-static struct cpu cpuinfo_unicore;
-
-static int __init topology_init(void)
-{
-	int i;
-
-	for_each_possible_cpu(i)
-		register_cpu(&cpuinfo_unicore, i);
-
-	return 0;
-}
-subsys_initcall(topology_init);
-
-#ifdef CONFIG_HAVE_PROC_CPU
-static int __init proc_cpu_init(void)
-{
-	struct proc_dir_entry *res;
-
-	res = proc_mkdir("cpu", NULL);
-	if (!res)
-		return -ENOMEM;
-	return 0;
-}
-fs_initcall(proc_cpu_init);
-#endif
-
-static int c_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "Processor\t: UniCore-II rev %d (%s)\n",
-		   (int)(uc32_cpuid >> 16) & 15, elf_platform);
-
-	seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-		   loops_per_jiffy / (500000/HZ),
-		   (loops_per_jiffy / (5000/HZ)) % 100);
-
-	/* dump out the processor features */
-	seq_puts(m, "Features\t: CMOV UC-F64");
-
-	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", uc32_cpuid >> 24);
-	seq_printf(m, "CPU architecture: 2\n");
-	seq_printf(m, "CPU revision\t: %d\n", (uc32_cpuid >> 16) & 15);
-
-	seq_printf(m, "Cache type\t: write-back\n"
-			"Cache clean\t: cp0 c5 ops\n"
-			"Cache lockdown\t: not support\n"
-			"Cache format\t: Harvard\n");
-
-	seq_puts(m, "\n");
-
-	seq_printf(m, "Hardware\t: PKUnity v3\n");
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < 1 ? (void *)1 : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return NULL;
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= c_show
-};
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
deleted file mode 100644
index 967352323185..000000000000
--- a/arch/unicore32/kernel/setup.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/setup.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_KERNEL_SETUP_H__
-#define __UNICORE_KERNEL_SETUP_H__
-
-#include <asm/hwdef-copro.h>
-
-extern void paging_init(void);
-extern void puv3_core_init(void);
-extern void cpu_init(void);
-
-extern void puv3_ps2_init(void);
-extern void pci_puv3_preinit(void);
-extern void __init puv3_init_gpio(void);
-
-extern void setup_mm_for_reboot(void);
-
-extern char __stubs_start[], __stubs_end[];
-extern char __vectors_start[], __vectors_end[];
-
-extern void kernel_thread_helper(void);
-
-extern void __init early_signal_init(void);
-
-extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, const char *loglvl);
-
-extern void __show_regs(struct pt_regs *);
-
-#endif
diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
deleted file mode 100644
index 3946182a835d..000000000000
--- a/arch/unicore32/kernel/signal.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/signal.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/personality.h>
-#include <linux/uaccess.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/unistd.h>
-
-#include <asm/cacheflush.h>
-#include <asm/ucontext.h>
-
-/*
- * For UniCore syscalls, we encode the syscall number into the instruction.
- */
-#define SWI_SYS_SIGRETURN	(0xff000000) /* error number for new abi */
-#define SWI_SYS_RT_SIGRETURN	(0xff000000 | (__NR_rt_sigreturn))
-#define SWI_SYS_RESTART		(0xff000000 | (__NR_restart_syscall))
-
-#define KERN_SIGRETURN_CODE	(KUSER_VECPAGE_BASE + 0x00000500)
-#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
-
-const unsigned long sigreturn_codes[3] = {
-	SWI_SYS_SIGRETURN, SWI_SYS_RT_SIGRETURN,
-};
-
-const unsigned long syscall_restart_code[2] = {
-	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
-	0x69efc004,		/* ldr	pc, [sp], #4 */
-};
-
-/*
- * Do a signal return; undo the signal stack.  These are aligned to 64-bit.
- */
-struct sigframe {
-	struct ucontext uc;
-	unsigned long retcode[2];
-};
-
-struct rt_sigframe {
-	struct siginfo info;
-	struct sigframe sig;
-};
-
-static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
-{
-	sigset_t set;
-	int err;
-
-	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
-	if (err == 0)
-		set_current_blocked(&set);
-
-	err |= __get_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
-	err |= __get_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
-	err |= __get_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
-	err |= __get_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
-	err |= __get_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
-	err |= __get_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
-	err |= __get_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
-	err |= __get_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
-	err |= __get_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
-	err |= __get_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
-	err |= __get_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
-	err |= __get_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
-	err |= __get_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
-	err |= __get_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
-	err |= __get_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
-	err |= __get_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
-	err |= __get_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
-	err |= __get_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
-	err |= __get_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
-	err |= __get_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
-	err |= __get_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
-	err |= __get_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
-	err |= __get_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
-	err |= __get_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
-	err |= __get_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
-	err |= __get_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
-	err |= __get_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
-	err |= __get_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
-	err |= __get_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
-	err |= __get_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
-	err |= __get_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
-	err |= __get_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
-	err |= __get_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
-
-	err |= !valid_user_regs(regs);
-
-	return err;
-}
-
-asmlinkage int __sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current->restart_block.fn = do_no_restart_syscall;
-
-	/*
-	 * Since we stacked the signal on a 64-bit boundary,
-	 * then 'sp' should be word aligned here.  If it's
-	 * not, then the user is trying to mess with us.
-	 */
-	if (regs->UCreg_sp & 7)
-		goto badframe;
-
-	frame = (struct rt_sigframe __user *)regs->UCreg_sp;
-
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-
-	if (restore_sigframe(regs, &frame->sig))
-		goto badframe;
-
-	if (restore_altstack(&frame->sig.uc.uc_stack))
-		goto badframe;
-
-	return regs->UCreg_00;
-
-badframe:
-	force_sig(SIGSEGV);
-	return 0;
-}
-
-static int setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs,
-		sigset_t *set)
-{
-	int err = 0;
-
-	err |= __put_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
-	err |= __put_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
-	err |= __put_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
-	err |= __put_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
-	err |= __put_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
-	err |= __put_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
-	err |= __put_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
-	err |= __put_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
-	err |= __put_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
-	err |= __put_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
-	err |= __put_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
-	err |= __put_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
-	err |= __put_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
-	err |= __put_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
-	err |= __put_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
-	err |= __put_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
-	err |= __put_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
-	err |= __put_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
-	err |= __put_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
-	err |= __put_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
-	err |= __put_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
-	err |= __put_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
-	err |= __put_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
-	err |= __put_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
-	err |= __put_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
-	err |= __put_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
-	err |= __put_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
-	err |= __put_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
-	err |= __put_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
-	err |= __put_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
-	err |= __put_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
-	err |= __put_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
-	err |= __put_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
-
-	err |= __put_user(current->thread.trap_no,
-			&sf->uc.uc_mcontext.trap_no);
-	err |= __put_user(current->thread.error_code,
-			&sf->uc.uc_mcontext.error_code);
-	err |= __put_user(current->thread.address,
-			&sf->uc.uc_mcontext.fault_address);
-	err |= __put_user(set->sig[0], &sf->uc.uc_mcontext.oldmask);
-
-	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
-
-	return err;
-}
-
-static inline void __user *get_sigframe(struct k_sigaction *ka,
-		struct pt_regs *regs, int framesize)
-{
-	unsigned long sp = regs->UCreg_sp;
-	void __user *frame;
-
-	/*
-	 * This is the X/Open sanctioned signal stack switching.
-	 */
-	if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	/*
-	 * ATPCS B01 mandates 8-byte alignment
-	 */
-	frame = (void __user *)((sp - framesize) & ~7);
-
-	/*
-	 * Check that we can actually write to the signal frame.
-	 */
-	if (!access_ok(frame, framesize))
-		frame = NULL;
-
-	return frame;
-}
-
-static int setup_return(struct pt_regs *regs, struct k_sigaction *ka,
-	     unsigned long __user *rc, void __user *frame, int usig)
-{
-	unsigned long handler = (unsigned long)ka->sa.sa_handler;
-	unsigned long retcode;
-	unsigned long asr = regs->UCreg_asr & ~PSR_f;
-
-	unsigned int idx = 0;
-
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		idx += 1;
-
-	if (__put_user(sigreturn_codes[idx],   rc) ||
-	    __put_user(sigreturn_codes[idx+1], rc+1))
-		return 1;
-
-	retcode = KERN_SIGRETURN_CODE + (idx << 2);
-
-	regs->UCreg_00 = usig;
-	regs->UCreg_sp = (unsigned long)frame;
-	regs->UCreg_lr = retcode;
-	regs->UCreg_pc = handler;
-	regs->UCreg_asr = asr;
-
-	return 0;
-}
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set,
-		       struct pt_regs *regs)
-{
-	struct sigframe __user *frame = get_sigframe(&ksig->ka, regs, sizeof(*frame));
-	int err = 0;
-
-	if (!frame)
-		return 1;
-
-	/*
-	 * Set uc.uc_flags to a value which sc.trap_no would never have.
-	 */
-	err |= __put_user(0x5ac3c35a, &frame->uc.uc_flags);
-
-	err |= setup_sigframe(frame, regs, set);
-	if (err == 0)
-		err |= setup_return(regs, &ksig->ka, frame->retcode, frame,
-				    ksig->sig);
-
-	return err;
-}
-
-static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
-			  struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame =
-			get_sigframe(&ksig->ka, regs, sizeof(*frame));
-	int err = 0;
-
-	if (!frame)
-		return 1;
-
-	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
-	err |= __put_user(0, &frame->sig.uc.uc_flags);
-	err |= __put_user(NULL, &frame->sig.uc.uc_link);
-	err |= __save_altstack(&frame->sig.uc.uc_stack, regs->UCreg_sp);
-	err |= setup_sigframe(&frame->sig, regs, set);
-	if (err == 0)
-		err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame,
-				    ksig->sig);
-
-	if (err == 0) {
-		/*
-		 * For realtime signals we must also set the second and third
-		 * arguments for the signal handler.
-		 */
-		regs->UCreg_01 = (unsigned long)&frame->info;
-		regs->UCreg_02 = (unsigned long)&frame->sig.uc;
-	}
-
-	return err;
-}
-
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
-	regs->UCreg_00 = regs->UCreg_ORIG_00;
-	regs->UCreg_pc -= 4;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void handle_signal(struct ksignal *ksig, struct pt_regs *regs,
-			  int syscall)
-{
-	struct thread_info *thread = current_thread_info();
-	sigset_t *oldset = sigmask_to_save();
-	int usig = ksig->sig;
-	int ret;
-
-	/*
-	 * If we were from a system call, check for system call restarting...
-	 */
-	if (syscall) {
-		switch (regs->UCreg_00) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			regs->UCreg_00 = -EINTR;
-			break;
-		case -ERESTARTSYS:
-			if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
-				regs->UCreg_00 = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			setup_syscall_restart(regs);
-		}
-	}
-
-	/*
-	 * Set up the stack frame
-	 */
-	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(ksig, oldset, regs);
-	else
-		ret = setup_frame(ksig, oldset, regs);
-
-	/*
-	 * Check that the resulting registers are actually sane.
-	 */
-	ret |= !valid_user_regs(regs);
-
-	signal_setup_done(ret, ksig, 0);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs, int syscall)
-{
-	struct ksignal ksig;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (get_signal(&ksig)) {
-		handle_signal(&ksig, regs, syscall);
-		return;
-	}
-
-	/*
-	 * No signal to deliver to the process - restart the syscall.
-	 */
-	if (syscall) {
-		if (regs->UCreg_00 == -ERESTART_RESTARTBLOCK) {
-				u32 __user *usp;
-
-				regs->UCreg_sp -= 4;
-				usp = (u32 __user *)regs->UCreg_sp;
-
-				if (put_user(regs->UCreg_pc, usp) == 0) {
-					regs->UCreg_pc = KERN_RESTART_CODE;
-				} else {
-					regs->UCreg_sp += 4;
-					force_sigsegv(0);
-				}
-		}
-		if (regs->UCreg_00 == -ERESTARTNOHAND ||
-		    regs->UCreg_00 == -ERESTARTSYS ||
-		    regs->UCreg_00 == -ERESTARTNOINTR) {
-			setup_syscall_restart(regs);
-		}
-	}
-	/* If there's no signal to deliver, we just put the saved
-	 * sigmask back.
-	 */
-	restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs,
-		unsigned int thread_flags, int syscall)
-{
-	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(regs, syscall);
-
-	if (thread_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
-}
-
-/*
- * Copy signal return handlers into the vector page, and
- * set sigreturn to be a pointer to these.
- */
-void __init early_signal_init(void)
-{
-	memcpy((void *)kuser_vecpage_to_vectors(KERN_SIGRETURN_CODE),
-			sigreturn_codes, sizeof(sigreturn_codes));
-	memcpy((void *)kuser_vecpage_to_vectors(KERN_RESTART_CODE),
-			syscall_restart_code, sizeof(syscall_restart_code));
-	/* Need not to flush icache, since early_trap_init will do it last. */
-}
diff --git a/arch/unicore32/kernel/sleep.S b/arch/unicore32/kernel/sleep.S
deleted file mode 100644
index 23151abe53c6..000000000000
--- a/arch/unicore32/kernel/sleep.S
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/sleep.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-		.text
-
-pkunity_cpu_save_cp:
-
-	@ get coprocessor registers
-
-	movc	r3, p0.c7, #0			@ PID
-	movc	r4, p0.c2, #0			@ translation table base addr
-	movc	r5, p0.c1, #0			@ control reg
-
-
-	@ store them plus current virtual stack ptr on stack
-	mov	r6, sp
-	stm.w	(r3 - r6), [sp-]
-
-	mov	pc, lr
-
-pkunity_cpu_save_sp:
-	@ preserve phys address of stack
-	mov	r0, sp
-	stw.w	lr, [sp+], #-4
-	b.l	sleep_phys_sp
-	ldw	r1, =sleep_save_sp
-	stw	r0, [r1]
-	ldw.w	pc, [sp]+, #4
-
-/*
- * puv3_cpu_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-
-ENTRY(puv3_cpu_suspend)
-	stm.w	(r16 - r27, lr), [sp-]		@ save registers on stack
-	stm.w	(r4 - r15), [sp-]		@ save registers on stack
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	sfm.w	(f0  - f7 ), [sp-]
-	sfm.w	(f8  - f15), [sp-]
-	sfm.w	(f16 - f23), [sp-]
-	sfm.w	(f24 - f31), [sp-]
-	cff	r4, s31
-	stm.w	(r4), [sp-]
-#endif
-	b.l	pkunity_cpu_save_cp
-
-	b.l	pkunity_cpu_save_sp
-
-	@ clean data cache
-	mov	r1, #0
-	movc	p0.c5, r1, #14
-	nop
-	nop
-	nop
-	nop
-
-
-
-	@ DDR2 BaseAddr
-	ldw	r0, =(PKUNITY_DDR2CTRL_BASE)
-
-	@ PM BaseAddr
-	ldw	r1, =(PKUNITY_PM_BASE)
-
-	@ set PLL_SYS_CFG reg, 275
-	movl	r6, #0x00002401
-	stw	r6, [r1+], #0x18
-	@ set PLL_DDR_CFG reg, 66MHz
-	movl	r6, #0x00100c00
-	stw	r6, [r1+], #0x1c
-
-	@ set wake up source
-	movl	r8, #0x800001ff		@ epip4d
-	stw	r8, [r1+], #0xc
-
-	@ set PGSR
-	movl	r5, #0x40000
-	stw	r5, [r1+], #0x10
-
-	@ prepare DDR2 refresh settings
-	ldw	r5, [r0+], #0x24
-	or	r5, r5, #0x00000001
-
-	@ prepare PMCR for PLL changing
-	movl	r6, #0xc
-
-	@ prepare for closing PLL
-	movl	r7, #0x1
-
-	@ prepare sleep mode
-	mov	r8, #0x1
-
-@	movl	r0, 0x11111111
-@	put_word_ocd r0
-	b	pkunity_cpu_do_suspend
-
-	.ltorg
-	.align	5
-pkunity_cpu_do_suspend:
-	b	101f
-	@ put DDR2 into self-refresh
-100:	stw	r5, [r0+], #0x24
-	@ change PLL
-	stw	r6, [r1]
-	b	1f
-
-	.ltorg
-	.align	5
-101:	b	102f
-	@ wait for PLL changing complete
-1:	ldw	r6, [r1+], #0x44
-	csub.a	r6, #0x1
-	bne	1b
-	b	2f
-
-	.ltorg
-	.align	5
-102:	b	100b
-	@ close PLL
-2:	stw	r7, [r1+], #0x4
-	@ enter sleep mode
-	stw	r8, [r1]
-3:	b	3b
-
-
-
-
-/*
- * puv3_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow sleep_save_sp to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-
-	.data
-	.align 5
-ENTRY(puv3_cpu_resume)
-@	movl	r0, 0x20202020
-@	put_word_ocd r0
-
-	ldw	r0, sleep_save_sp		@ stack phys addr
-	ldw	r2, =resume_after_mmu		@ its absolute virtual address
-	ldm	(r3 - r6), [r0]+		@ CP regs + virt stack ptr
-	mov	sp, r6				@ CP regs + virt stack ptr
-
-	mov	r1, #0
-	movc	p0.c6, r1, #6			@ invalidate I & D TLBs
-	movc	p0.c5, r1, #28			@ invalidate I & D caches, BTB
-
-	movc	p0.c7, r3, #0			@ PID
-	movc	p0.c2, r4, #0			@ translation table base addr
-	movc	p0.c1, r5, #0			@ control reg, turn on mmu
-	nop
-	jump	r2
-	nop
-	nop
-	nop
-	nop
-	nop
-
-sleep_save_sp:
-	.word	0				@ preserve stack phys ptr here
-
-	.text
-resume_after_mmu:
-@	movl	r0, 0x30303030
-@	put_word_ocd r0
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	lfm.w	(f0  - f7 ), [sp]+
-	lfm.w	(f8  - f15), [sp]+
-	lfm.w	(f16 - f23), [sp]+
-	lfm.w	(f24 - f31), [sp]+
-	ldm.w	(r4), [sp]+
-	ctf	r4, s31
-#endif
-	ldm.w	(r4 - r15), [sp]+		@ restore registers from stack
-	ldm.w	(r16 - r27, pc), [sp]+		@ return to caller
diff --git a/arch/unicore32/kernel/stacktrace.c b/arch/unicore32/kernel/stacktrace.c
deleted file mode 100644
index c9d8650e9d78..000000000000
--- a/arch/unicore32/kernel/stacktrace.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/stacktrace.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/stacktrace.h>
-
-#include <asm/stacktrace.h>
-
-#if defined(CONFIG_FRAME_POINTER)
-/*
- * Unwind the current stack frame and store the new register values in the
- * structure passed as argument. Unwinding is equivalent to a function return,
- * hence the new PC value rather than LR should be used for backtrace.
- *
- * With framepointer enabled, a simple function prologue looks like this:
- *	mov	ip, sp
- *	stmdb	sp!, {fp, ip, lr, pc}
- *	sub	fp, ip, #4
- *
- * A simple function epilogue looks like this:
- *	ldm	sp, {fp, sp, pc}
- *
- * Note that with framepointer enabled, even the leaf functions have the same
- * prologue and epilogue, therefore we can ignore the LR value in this case.
- */
-int notrace unwind_frame(struct stackframe *frame)
-{
-	unsigned long high, low;
-	unsigned long fp = frame->fp;
-
-	/* only go to a higher address on the stack */
-	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE);
-
-	/* check current frame pointer is within bounds */
-	if (fp < (low + 12) || fp + 4 >= high)
-		return -EINVAL;
-
-	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
-
-	return 0;
-}
-#endif
-
-void notrace walk_stackframe(struct stackframe *frame,
-		     int (*fn)(struct stackframe *, void *), void *data)
-{
-	while (1) {
-		int ret;
-
-		if (fn(frame, data))
-			break;
-		ret = unwind_frame(frame);
-		if (ret < 0)
-			break;
-	}
-}
-EXPORT_SYMBOL(walk_stackframe);
-
-#ifdef CONFIG_STACKTRACE
-struct stack_trace_data {
-	struct stack_trace *trace;
-	unsigned int no_sched_functions;
-	unsigned int skip;
-};
-
-static int save_trace(struct stackframe *frame, void *d)
-{
-	struct stack_trace_data *data = d;
-	struct stack_trace *trace = data->trace;
-	unsigned long addr = frame->pc;
-
-	if (data->no_sched_functions && in_sched_functions(addr))
-		return 0;
-	if (data->skip) {
-		data->skip--;
-		return 0;
-	}
-
-	trace->entries[trace->nr_entries++] = addr;
-
-	return trace->nr_entries >= trace->max_entries;
-}
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
-	struct stack_trace_data data;
-	struct stackframe frame;
-
-	data.trace = trace;
-	data.skip = trace->skip;
-
-	if (tsk != current) {
-		data.no_sched_functions = 1;
-		frame.fp = thread_saved_fp(tsk);
-		frame.sp = thread_saved_sp(tsk);
-		frame.lr = 0;		/* recovered from the stack */
-		frame.pc = thread_saved_pc(tsk);
-	} else {
-		register unsigned long current_sp asm("sp");
-
-		data.no_sched_functions = 0;
-		frame.fp = (unsigned long)__builtin_frame_address(0);
-		frame.sp = current_sp;
-		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)save_stack_trace_tsk;
-	}
-
-	walk_stackframe(&frame, save_trace, &data);
-}
-
-void save_stack_trace(struct stack_trace *trace)
-{
-	save_stack_trace_tsk(current, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-#endif
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
deleted file mode 100644
index 256fb4082296..000000000000
--- a/arch/unicore32/kernel/sys.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/sys.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/ipc.h>
-#include <linux/uaccess.h>
-
-#include <asm/syscalls.h>
-#include <asm/cacheflush.h>
-
-/* Provide the actual syscall number to call mapping. */
-#undef __SYSCALL
-#define __SYSCALL(nr, call)	[nr] = (call),
-
-#define sys_mmap2 sys_mmap_pgoff
-/* Note that we don't include <linux/unistd.h> but <asm/unistd.h> */
-void *sys_call_table[__NR_syscalls] = {
-	[0 ... __NR_syscalls-1] = sys_ni_syscall,
-#include <asm/unistd.h>
-};
diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
deleted file mode 100644
index c3a37edf4d40..000000000000
--- a/arch/unicore32/kernel/time.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/time.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-
-#include <mach/hardware.h>
-
-#define MIN_OSCR_DELTA 2
-
-static irqreturn_t puv3_ost0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/* Disarm the compare/match, signal the event. */
-	writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
-	writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static int
-puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
-{
-	unsigned long next, oscr;
-
-	writel(readl(OST_OIER) | OST_OIER_E0, OST_OIER);
-	next = readl(OST_OSCR) + delta;
-	writel(next, OST_OSMR0);
-	oscr = readl(OST_OSCR);
-
-	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
-}
-
-static int puv3_osmr0_shutdown(struct clock_event_device *evt)
-{
-	writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
-	writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
-	return 0;
-}
-
-static struct clock_event_device ckevt_puv3_osmr0 = {
-	.name			= "osmr0",
-	.features		= CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 200,
-	.set_next_event		= puv3_osmr0_set_next_event,
-	.set_state_shutdown	= puv3_osmr0_shutdown,
-	.set_state_oneshot	= puv3_osmr0_shutdown,
-};
-
-static u64 puv3_read_oscr(struct clocksource *cs)
-{
-	return readl(OST_OSCR);
-}
-
-static struct clocksource cksrc_puv3_oscr = {
-	.name		= "oscr",
-	.rating		= 200,
-	.read		= puv3_read_oscr,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init time_init(void)
-{
-	writel(0, OST_OIER);		/* disable any timer interrupts */
-	writel(0, OST_OSSR);		/* clear status on all timers */
-
-	clockevents_calc_mult_shift(&ckevt_puv3_osmr0, CLOCK_TICK_RATE, 5);
-
-	ckevt_puv3_osmr0.max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, &ckevt_puv3_osmr0);
-	ckevt_puv3_osmr0.max_delta_ticks = 0x7fffffff;
-	ckevt_puv3_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_puv3_osmr0) + 1;
-	ckevt_puv3_osmr0.min_delta_ticks = MIN_OSCR_DELTA * 2;
-	ckevt_puv3_osmr0.cpumask = cpumask_of(0);
-
-	if (request_irq(IRQ_TIMER0, puv3_ost0_interrupt,
-			IRQF_TIMER | IRQF_IRQPOLL, "ost0", &ckevt_puv3_osmr0))
-		pr_err("Failed to register ost0 interrupt\n");
-
-	clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE);
-	clockevents_register_device(&ckevt_puv3_osmr0);
-}
-
-#ifdef CONFIG_PM
-unsigned long osmr[4], oier;
-
-void puv3_timer_suspend(void)
-{
-	osmr[0] = readl(OST_OSMR0);
-	osmr[1] = readl(OST_OSMR1);
-	osmr[2] = readl(OST_OSMR2);
-	osmr[3] = readl(OST_OSMR3);
-	oier = readl(OST_OIER);
-}
-
-void puv3_timer_resume(void)
-{
-	writel(0, OST_OSSR);
-	writel(osmr[0], OST_OSMR0);
-	writel(osmr[1], OST_OSMR1);
-	writel(osmr[2], OST_OSMR2);
-	writel(osmr[3], OST_OSMR3);
-	writel(oier, OST_OIER);
-
-	/*
-	 * OSMR0 is the system timer: make sure OSCR is sufficiently behind
-	 */
-	writel(readl(OST_OSMR0) - LATCH, OST_OSCR);
-}
-#else
-void puv3_timer_suspend(void) { };
-void puv3_timer_resume(void) { };
-#endif
-
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
deleted file mode 100644
index a3ac01df1a2e..000000000000
--- a/arch/unicore32/kernel/traps.c
+++ /dev/null
@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/traps.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  'traps.c' handles hardware exceptions after we have saved some state.
- *  Mostly a debugging aid, but will probably kill the offending process.
- */
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/spinlock.h>
-#include <linux/personality.h>
-#include <linux/kallsyms.h>
-#include <linux/kdebug.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/atomic.h>
-#include <linux/unistd.h>
-
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-#include "setup.h"
-
-static void dump_mem(const char *, const char *, unsigned long, unsigned long);
-
-void dump_backtrace_entry(unsigned long where,
-		unsigned long from, unsigned long frame)
-{
-#ifdef CONFIG_KALLSYMS
-	printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n",
-			where, (void *)where, from, (void *)from);
-#else
-	printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n",
-			where, from);
-#endif
-}
-
-/*
- * Stack pointers should always be within the kernels view of
- * physical memory.  If it is not there, then we can't dump
- * out any information relating to the stack.
- */
-static int verify_stack(unsigned long sp)
-{
-	if (sp < PAGE_OFFSET ||
-	    (sp > (unsigned long)high_memory && high_memory != NULL))
-		return -EFAULT;
-
-	return 0;
-}
-
-/*
- * Dump out the contents of some memory nicely...
- */
-static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
-		     unsigned long top)
-{
-	unsigned long first;
-	mm_segment_t fs;
-	int i;
-
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n",
-			lvl, str, bottom, top);
-
-	for (first = bottom & ~31; first < top; first += 32) {
-		unsigned long p;
-		char str[sizeof(" 12345678") * 8 + 1];
-
-		memset(str, ' ', sizeof(str));
-		str[sizeof(str) - 1] = '\0';
-
-		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
-			if (p >= bottom && p < top) {
-				unsigned long val;
-				if (__get_user(val, (unsigned long *)p) == 0)
-					sprintf(str + i * 9, " %08lx", val);
-				else
-					sprintf(str + i * 9, " ????????");
-			}
-		}
-		printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str);
-	}
-
-	set_fs(fs);
-}
-
-static void dump_instr(const char *lvl, struct pt_regs *regs)
-{
-	unsigned long addr = instruction_pointer(regs);
-	const int width = 8;
-	mm_segment_t fs;
-	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
-	int i;
-
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	for (i = -4; i < 1; i++) {
-		unsigned int val, bad;
-
-		bad = __get_user(val, &((u32 *)addr)[i]);
-
-		if (!bad)
-			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
-					width, val);
-		else {
-			p += sprintf(p, "bad PC value");
-			break;
-		}
-	}
-	printk(KERN_DEFAULT "%sCode: %s\n", lvl, str);
-
-	set_fs(fs);
-}
-
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-			   const char *loglvl)
-{
-	unsigned int fp;
-	int ok = 1;
-
-	printk("%sBacktrace: ", loglvl);
-
-	if (!tsk)
-		tsk = current;
-
-	if (regs)
-		fp = regs->UCreg_fp;
-	else if (tsk != current)
-		fp = thread_saved_fp(tsk);
-	else
-		asm("mov %0, fp" : "=r" (fp) : : "cc");
-
-	if (!fp) {
-		printk("%sno frame pointer", loglvl);
-		ok = 0;
-	} else if (verify_stack(fp)) {
-		printk("%sinvalid frame pointer 0x%08x", loglvl, fp);
-		ok = 0;
-	} else if (fp < (unsigned long)end_of_stack(tsk))
-		printk("%sframe pointer underflow", loglvl);
-	printk("%s\n", loglvl);
-
-	if (ok)
-		c_backtrace(fp, loglvl);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp,
-		       const char *loglvl)
-{
-	dump_backtrace(NULL, tsk, loglvl);
-	barrier();
-}
-
-static int __die(const char *str, int err, struct thread_info *thread,
-		struct pt_regs *regs)
-{
-	struct task_struct *tsk = thread->task;
-	static int die_counter;
-	int ret;
-
-	printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
-	       str, err, ++die_counter);
-
-	/* trap and error numbers are mostly meaningless on UniCore */
-	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
-			SIGSEGV);
-	if (ret == NOTIFY_STOP)
-		return ret;
-
-	print_modules();
-	__show_regs(regs);
-	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
-		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
-
-	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp,
-			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
-		dump_backtrace(regs, tsk, KERN_EMERG);
-		dump_instr(KERN_EMERG, regs);
-	}
-
-	return ret;
-}
-
-DEFINE_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-void die(const char *str, struct pt_regs *regs, int err)
-{
-	struct thread_info *thread = current_thread_info();
-	int ret;
-
-	oops_enter();
-
-	spin_lock_irq(&die_lock);
-	console_verbose();
-	bust_spinlocks(1);
-	ret = __die(str, err, thread, regs);
-
-	bust_spinlocks(0);
-	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
-	spin_unlock_irq(&die_lock);
-	oops_exit();
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-	if (panic_on_oops)
-		panic("Fatal exception");
-	if (ret != NOTIFY_STOP)
-		do_exit(SIGSEGV);
-}
-
-void uc32_notify_die(const char *str, struct pt_regs *regs,
-		int sig, int code, void __user *addr,
-		unsigned long err, unsigned long trap)
-{
-	if (user_mode(regs)) {
-		current->thread.error_code = err;
-		current->thread.trap_no = trap;
-
-		force_sig_fault(sig, code, addr);
-	} else
-		die(str, regs, err);
-}
-
-/*
- * bad_mode handles the impossible case in the vectors.  If you see one of
- * these, then it's extremely serious, and could mean you have buggy hardware.
- * It never returns, and never tries to sync.  We hope that we can at least
- * dump out some state information...
- */
-asmlinkage void bad_mode(struct pt_regs *regs, unsigned int reason)
-{
-	console_verbose();
-
-	printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason);
-
-	die("Oops - bad mode", regs, 0);
-	local_irq_disable();
-	panic("bad mode");
-}
-
-void __pte_error(const char *file, int line, unsigned long val)
-{
-	printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val);
-}
-
-void __pmd_error(const char *file, int line, unsigned long val)
-{
-	printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val);
-}
-
-void __pgd_error(const char *file, int line, unsigned long val)
-{
-	printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val);
-}
-
-asmlinkage void __div0(void)
-{
-	printk(KERN_DEFAULT "Division by zero in kernel.\n");
-	dump_stack();
-}
-EXPORT_SYMBOL(__div0);
-
-void abort(void)
-{
-	BUG();
-
-	/* if that doesn't kill us, halt */
-	panic("Oops failed to kill thread");
-}
-
-void __init trap_init(void)
-{
-	return;
-}
-
-void __init early_trap_init(void)
-{
-	unsigned long vectors = VECTORS_BASE;
-
-	/*
-	 * Copy the vectors, stubs (in entry-unicore.S)
-	 * into the vector page, mapped at 0xffff0000, and ensure these
-	 * are visible to the instruction stream.
-	 */
-	memcpy((void *)vectors,
-			__vectors_start,
-			__vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x200,
-			__stubs_start,
-			__stubs_end - __stubs_start);
-
-	early_signal_init();
-
-	flush_icache_range(vectors, vectors + PAGE_SIZE);
-}
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
deleted file mode 100644
index 6fb320b337ef..000000000000
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/vmlinux.lds.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-OUTPUT_ARCH(unicore32)
-ENTRY(stext)
-
-jiffies = jiffies_64;
-
-SECTIONS
-{
-	. = PAGE_OFFSET + KERNEL_IMAGE_START;
-
-	_text = .;
-	__init_begin = .;
-	HEAD_TEXT_SECTION
-	INIT_TEXT_SECTION(PAGE_SIZE)
-	INIT_DATA_SECTION(16)
-	PERCPU_SECTION(L1_CACHE_BYTES)
-	__init_end = .;
-
-	_stext = .;
-	.text : {		/* Real text segment */
-		TEXT_TEXT
-		SCHED_TEXT
-		CPUIDLE_TEXT
-		LOCK_TEXT
-
-		*(.fixup)
-		*(.gnu.warning)
-	}
-	_etext = .;
-
-	_sdata = .;
-	RO_DATA(PAGE_SIZE)
-	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
-	_edata = .;
-
-	EXCEPTION_TABLE(L1_CACHE_BYTES)
-
-	BSS_SECTION(0, 0, 0)
-	_end = .;
-
-	STABS_DEBUG
-	DWARF_DEBUG
-
-	DISCARDS		/* Exit code and data */
-}