ata: move *sata_set_spd*() to libata-sata.c

* move *sata_set_spd*() to libata-sata.c

* add static inlines for CONFIG_SATA_HOST=n case

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32842     572      40   33458    82ae drivers/ata/libata-core.o
after:
  32812     572      40   33428    8290 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 0 insertions, 81 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ba1e5c4d3c09..13214ebd0e5c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3050,87 +3050,6 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
 	return 0;
 }
 
-static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
-{
-	struct ata_link *host_link = &link->ap->link;
-	u32 limit, target, spd;
-
-	limit = link->sata_spd_limit;
-
-	/* Don't configure downstream link faster than upstream link.
-	 * It doesn't speed up anything and some PMPs choke on such
-	 * configuration.
-	 */
-	if (!ata_is_host_link(link) && host_link->sata_spd)
-		limit &= (1 << host_link->sata_spd) - 1;
-
-	if (limit == UINT_MAX)
-		target = 0;
-	else
-		target = fls(limit);
-
-	spd = (*scontrol >> 4) & 0xf;
-	*scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
-
-	return spd != target;
-}
-
-/**
- *	sata_set_spd_needed - is SATA spd configuration needed
- *	@link: Link in question
- *
- *	Test whether the spd limit in SControl matches
- *	@link->sata_spd_limit.  This function is used to determine
- *	whether hardreset is necessary to apply SATA spd
- *	configuration.
- *
- *	LOCKING:
- *	Inherited from caller.
- *
- *	RETURNS:
- *	1 if SATA spd configuration is needed, 0 otherwise.
- */
-static int sata_set_spd_needed(struct ata_link *link)
-{
-	u32 scontrol;
-
-	if (sata_scr_read(link, SCR_CONTROL, &scontrol))
-		return 1;
-
-	return __sata_set_spd_needed(link, &scontrol);
-}
-
-/**
- *	sata_set_spd - set SATA spd according to spd limit
- *	@link: Link to set SATA spd for
- *
- *	Set SATA spd of @link according to sata_spd_limit.
- *
- *	LOCKING:
- *	Inherited from caller.
- *
- *	RETURNS:
- *	0 if spd doesn't need to be changed, 1 if spd has been
- *	changed.  Negative errno if SCR registers are inaccessible.
- */
-int sata_set_spd(struct ata_link *link)
-{
-	u32 scontrol;
-	int rc;
-
-	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-		return rc;
-
-	if (!__sata_set_spd_needed(link, &scontrol))
-		return 0;
-
-	if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
-		return rc;
-
-	return 1;
-}
-EXPORT_SYMBOL_GPL(sata_set_spd);
-
 #ifdef CONFIG_ATA_ACPI
 /**
  *	ata_timing_cycle2mode - find xfer mode for the specified cycle duration