Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 76 insertions, 1 deletions

diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 53c6a8a58859..0856189c065f 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -213,16 +213,26 @@ static int bcma_host_pci_probe(struct pci_dev *dev,
 	/* Initialize struct, detect chip */
 	bcma_init_bus(bus);
 
+	/* Scan bus to find out generation of PCIe core */
+	err = bcma_bus_scan(bus);
+	if (err)
+		goto err_pci_unmap_mmio;
+
+	if (bcma_find_core(bus, BCMA_CORE_PCIE2))
+		bus->host_is_pcie2 = true;
+
 	/* Register */
 	err = bcma_bus_register(bus);
 	if (err)
-		goto err_pci_unmap_mmio;
+		goto err_unregister_cores;
 
 	pci_set_drvdata(dev, bus);
 
 out:
 	return err;
 
+err_unregister_cores:
+	bcma_unregister_cores(bus);
 err_pci_unmap_mmio:
 	pci_iounmap(dev, bus->mmio);
 err_pci_release_regions:
@@ -283,9 +293,12 @@ static const struct pci_device_id bcma_pci_bridge_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) },	/* 0xa8db, BCM43217 (sic!) */
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) },	/* 0xa8dc */
@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void)
 {
 	pci_unregister_driver(&bcma_pci_bridge_driver);
 }
+
+/**************************************************
+ * Runtime ops for drivers.
+ **************************************************/
+
+/* See also pcicore_up */
+void bcma_host_pci_up(struct bcma_bus *bus)
+{
+	if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+		return;
+
+	if (bus->host_is_pcie2)
+		bcma_core_pcie2_up(&bus->drv_pcie2);
+	else
+		bcma_core_pci_up(&bus->drv_pci[0]);
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_up);
+
+/* See also pcicore_down */
+void bcma_host_pci_down(struct bcma_bus *bus)
+{
+	if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+		return;
+
+	if (!bus->host_is_pcie2)
+		bcma_core_pci_down(&bus->drv_pci[0]);
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_down);
+
+/* See also si_pci_setup */
+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
+			  bool enable)
+{
+	struct pci_dev *pdev;
+	u32 coremask, tmp;
+	int err = 0;
+
+	if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
+		/* This bcma device is not on a PCI host-bus. So the IRQs are
+		 * not routed through the PCI core.
+		 * So we must not enable routing through the PCI core. */
+		goto out;
+	}
+
+	pdev = bus->host_pci;
+
+	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
+	if (err)
+		goto out;
+
+	coremask = BIT(core->core_index) << 8;
+	if (enable)
+		tmp |= coremask;
+	else
+		tmp &= ~coremask;
+
+	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);