Bluetooth: btmtk: introduce btmtk reset work

Introduce btmtk_reset_work which can be called whenever the firmware abort,
HCI command timeout, other fatal error happen.

Co-developed-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

1 files changed, 74 insertions, 71 deletions

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2122e86f13cf..2d3e2cb7963f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3040,6 +3040,78 @@ static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
 	return val & MTK_BT_RST_DONE;
 }
 
+static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct btmediatek_data *mediatek;
+	u32 val;
+	int err;
+
+	/* It's MediaTek specific bluetooth reset mechanism via USB */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return -EBUSY;
+	}
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		return err;
+
+	btusb_stop_traffic(data);
+	usb_kill_anchored_urbs(&data->tx_anchor);
+	mediatek = hci_get_priv(hdev);
+
+	if (mediatek->dev_id == 0x7925) {
+		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+		val |= (1 << 5);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+		val &= 0xFFFF00FF;
+		val |= (1 << 13);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+		val |= (1 << 0);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+		msleep(100);
+	} else {
+		/* It's Device EndPoint Reset Option Register */
+		bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
+		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
+
+		/* Reset the bluetooth chip via USB interface. */
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+		/* MT7921 need to delay 20ms between toggle reset bit */
+		msleep(20);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+	}
+
+	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+				 val & MTK_BT_RST_DONE, 20000, 1000000);
+	if (err < 0)
+		bt_dev_err(hdev, "Reset timeout");
+
+	btusb_mtk_id_get(data, 0x70010200, &val);
+	if (!val)
+		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
+
+	usb_queue_reset_device(data->intf);
+
+	clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
+
+	return err;
+}
+
 static int btusb_mtk_setup(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -3079,6 +3151,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 
 	mediatek = hci_get_priv(hdev);
 	mediatek->dev_id = dev_id;
+	mediatek->reset_sync = btusb_mtk_reset;
 
 	switch (dev_id) {
 	case 0x7663:
@@ -3236,76 +3309,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
 	return 0;
 }
 
-static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
-{
-	struct btusb_data *data = hci_get_drvdata(hdev);
-	u32 val;
-	int err;
-	struct btmediatek_data *mediatek;
-
-	/* It's MediaTek specific bluetooth reset mechanism via USB */
-	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
-		bt_dev_err(hdev, "last reset failed? Not resetting again");
-		return;
-	}
-
-	err = usb_autopm_get_interface(data->intf);
-	if (err < 0)
-		return;
-
-	btusb_stop_traffic(data);
-	usb_kill_anchored_urbs(&data->tx_anchor);
-	mediatek = hci_get_priv(hdev);
-
-	if (mediatek->dev_id == 0x7925) {
-		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
-		val |= (1 << 5);
-		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
-		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
-		val &= 0xFFFF00FF;
-		val |= (1 << 13);
-		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
-		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
-		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
-		val |= (1 << 0);
-		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
-		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
-		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
-		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
-		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
-		msleep(100);
-	} else {
-		/* It's Device EndPoint Reset Option Register */
-		bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
-		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
-		btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
-
-		/* Reset the bluetooth chip via USB interface. */
-		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
-		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
-		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
-		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
-		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
-		/* MT7921 need to delay 20ms between toggle reset bit */
-		msleep(20);
-		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
-		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
-	}
-
-	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
-				 val & MTK_BT_RST_DONE, 20000, 1000000);
-	if (err < 0)
-		bt_dev_err(hdev, "Reset timeout");
-
-	btusb_mtk_id_get(data, 0x70010200, &val);
-	if (!val)
-		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
-
-	usb_queue_reset_device(data->intf);
-
-	clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
-}
-
 static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -4433,7 +4436,7 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->setup = btusb_mtk_setup;
 		hdev->shutdown = btusb_mtk_shutdown;
 		hdev->manufacturer = 70;
-		hdev->cmd_timeout = btusb_mtk_cmd_timeout;
+		hdev->cmd_timeout = btmtk_reset_sync;
 		hdev->set_bdaddr = btmtk_set_bdaddr;
 		set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);