Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...

4 files changed, 65 insertions, 17 deletions

diff --git a/drivers/clk/sprd/gate.c b/drivers/clk/sprd/gate.c
index 574cfc116bbc..56e1714b541e 100644
--- a/drivers/clk/sprd/gate.c
+++ b/drivers/clk/sprd/gate.c
@@ -94,8 +94,15 @@ static int sprd_gate_is_enabled(struct clk_hw *hw)
 {
 	struct sprd_gate *sg = hw_to_sprd_gate(hw);
 	struct sprd_clk_common *common = &sg->common;
+	struct clk_hw *parent;
 	unsigned int reg;
 
+	if (sg->flags & SPRD_GATE_NON_AON) {
+		parent = clk_hw_get_parent(hw);
+		if (!parent || !clk_hw_is_enabled(parent))
+			return 0;
+	}
+
 	regmap_read(common->regmap, common->reg, &reg);
 
 	if (sg->flags & CLK_GATE_SET_TO_DISABLE)
diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
index b55817869367..e738dafa4fe9 100644
--- a/drivers/clk/sprd/gate.h
+++ b/drivers/clk/sprd/gate.h
@@ -19,6 +19,15 @@ struct sprd_gate {
 	struct sprd_clk_common	common;
 };
 
+/*
+ * sprd_gate->flags is used for:
+ * CLK_GATE_SET_TO_DISABLE	BIT(0)
+ * CLK_GATE_HIWORD_MASK		BIT(1)
+ * CLK_GATE_BIG_ENDIAN		BIT(2)
+ * so we define new flags from	BIT(3)
+ */
+#define SPRD_GATE_NON_AON BIT(3) /* not alway powered on, check before read */
+
 #define SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
 				    _sc_offset, _enable_mask, _flags,	\
 				    _gate_flags, _udelay, _ops, _fn)	\
diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c
index 15791484388f..13a322b2535a 100644
--- a/drivers/clk/sprd/pll.c
+++ b/drivers/clk/sprd/pll.c
@@ -106,7 +106,7 @@ static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
 
 	cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
 	if (!cfg)
-		return -ENOMEM;
+		return parent_rate;
 
 	for (i = 0; i < regs_num; i++)
 		cfg[i] = sprd_pll_read(pll, i);
diff --git a/drivers/clk/sprd/sc9863a-clk.c b/drivers/clk/sprd/sc9863a-clk.c
index 2e2dfb2d48ff..ad2e0f9f8563 100644
--- a/drivers/clk/sprd/sc9863a-clk.c
+++ b/drivers/clk/sprd/sc9863a-clk.c
@@ -23,22 +23,22 @@
 #include "pll.h"
 
 /* mpll*_gate clocks control cpu cores, they were enabled by default */
-SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
-			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
-			     0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
-			     0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
-			     0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
-			     0x1000, BIT(0), 0, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
-			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
-			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
-SPRD_PLL_SC_GATE_CLK_FW_NAME(isppll_gate, "isppll-gate", "ext-26m", 0x1e8,
-			     0x1000, BIT(0), 0, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
+				    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
+				    0x1000, BIT(0), 0, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
+				    0x1000, BIT(0), 0, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
+				    0x1000, BIT(0), 0, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
+				    0x1000, BIT(0), 0, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
+				    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
+				    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+static SPRD_PLL_SC_GATE_CLK_FW_NAME(isppll_gate, "isppll-gate", "ext-26m",
+				    0x1e8, 0x1000, BIT(0), 0, 0, 240);
 
 static struct sprd_clk_common *sc9863a_pmu_gate_clks[] = {
 	/* address base is 0x402b0000 */
@@ -1615,6 +1615,36 @@ static const struct sprd_clk_desc sc9863a_mm_gate_desc = {
 	.hw_clks	= &sc9863a_mm_gate_hws,
 };
 
+/* camera sensor clocks */
+static SPRD_GATE_CLK_HW(mipi_csi_clk, "mipi-csi-clk", &mahb_ckg_eb.common.hw,
+			0x20, BIT(16), 0, SPRD_GATE_NON_AON);
+static SPRD_GATE_CLK_HW(mipi_csi_s_clk, "mipi-csi-s-clk", &mahb_ckg_eb.common.hw,
+			0x24, BIT(16), 0, SPRD_GATE_NON_AON);
+static SPRD_GATE_CLK_HW(mipi_csi_m_clk, "mipi-csi-m-clk", &mahb_ckg_eb.common.hw,
+			0x28, BIT(16), 0, SPRD_GATE_NON_AON);
+
+static struct sprd_clk_common *sc9863a_mm_clk_clks[] = {
+	/* address base is 0x60900000 */
+	&mipi_csi_clk.common,
+	&mipi_csi_s_clk.common,
+	&mipi_csi_m_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mm_clk_hws = {
+	.hws	= {
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+		[CLK_MIPI_CSI_S]	= &mipi_csi_s_clk.common.hw,
+		[CLK_MIPI_CSI_M]	= &mipi_csi_m_clk.common.hw,
+	},
+	.num	= CLK_MM_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mm_clk_desc = {
+	.clk_clks	= sc9863a_mm_clk_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mm_clk_clks),
+	.hw_clks	= &sc9863a_mm_clk_hws,
+};
+
 static SPRD_SC_GATE_CLK_FW_NAME(sim0_eb,	"sim0-eb",	"ext-26m", 0x0,
 				0x1000, BIT(0), 0, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(iis0_eb,	"iis0-eb",	"ext-26m", 0x0,
@@ -1738,6 +1768,8 @@ static const struct of_device_id sprd_sc9863a_clk_ids[] = {
 	  .data = &sc9863a_aonapb_gate_desc },
 	{ .compatible = "sprd,sc9863a-mm-gate",	/* 0x60800000 */
 	  .data = &sc9863a_mm_gate_desc },
+	{ .compatible = "sprd,sc9863a-mm-clk",	/* 0x60900000 */
+	  .data = &sc9863a_mm_clk_desc },
 	{ .compatible = "sprd,sc9863a-apapb-gate",	/* 0x71300000 */
 	  .data = &sc9863a_apapb_gate_desc },
 	{ }