drm/amd/display: Add helper for blanking all dp displays

[Why & How]
1. The code to blank all dp display have been called many times,
so add helpers in dc_link to make it more concise.
2. Add some check to fix the dmesg errors at boot and resume from S3
on dcn3.1 during DQE's promotion test.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

6 files changed, 66 insertions, 129 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 60544788e911..01c1f518eab0 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1999,6 +1999,57 @@ static enum dc_status enable_link_dp_mst(
 	return enable_link_dp(state, pipe_ctx);
 }
 
+void dc_link_blank_all_dp_displays(struct dc *dc)
+{
+	unsigned int i;
+	uint8_t dpcd_power_state = '\0';
+	enum dc_status status = DC_ERROR_UNEXPECTED;
+
+	for (i = 0; i < dc->link_count; i++) {
+		if ((dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT) ||
+			(dc->links[i]->priv == NULL) || (dc->links[i]->local_sink == NULL))
+			continue;
+
+		/* DP 2.0 spec requires that we read LTTPR caps first */
+		dp_retrieve_lttpr_cap(dc->links[i]);
+		/* if any of the displays are lit up turn them off */
+		status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+							&dpcd_power_state, sizeof(dpcd_power_state));
+
+		if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0)
+			dc_link_blank_dp_stream(dc->links[i], true);
+	}
+
+}
+
+void dc_link_blank_dp_stream(struct dc_link *link, bool hw_init)
+{
+	unsigned int j;
+	struct dc  *dc = link->ctx->dc;
+	enum signal_type signal = link->connector_signal;
+
+	if ((signal == SIGNAL_TYPE_EDP) ||
+		(signal == SIGNAL_TYPE_DISPLAY_PORT)) {
+		if (link->ep_type == DISPLAY_ENDPOINT_PHY &&
+			link->link_enc->funcs->get_dig_frontend &&
+			link->link_enc->funcs->is_dig_enabled(link->link_enc)) {
+			unsigned int fe = link->link_enc->funcs->get_dig_frontend(link->link_enc);
+
+			if (fe != ENGINE_ID_UNKNOWN)
+				for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+					if (fe == dc->res_pool->stream_enc[j]->id) {
+						dc->res_pool->stream_enc[j]->funcs->dp_blank(link,
+									dc->res_pool->stream_enc[j]);
+						break;
+					}
+				}
+		}
+
+		if ((!link->wa_flags.dp_keep_receiver_powered) || hw_init)
+			dp_receiver_power_ctrl(link, false);
+	}
+}
+
 static bool get_ext_hdmi_settings(struct pipe_ctx *pipe_ctx,
 		enum engine_id eng_id,
 		struct ext_hdmi_settings *settings)
diff --git a/drivers/gpu/drm/amd/display/dc/dc_link.h b/drivers/gpu/drm/amd/display/dc/dc_link.h
index 180ecd860296..669c162c0c02 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_link.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_link.h
@@ -287,6 +287,10 @@ bool dc_link_setup_psr(struct dc_link *dc_link,
 
 void dc_link_get_psr_residency(const struct dc_link *link, uint32_t *residency);
 
+void dc_link_blank_all_dp_displays(struct dc *dc);
+
+void dc_link_blank_dp_stream(struct dc_link *link, bool hw_init);
+
 /* Request DC to detect if there is a Panel connected.
  * boot - If this call is during initial boot.
  * Return false for any type of detection failure or MST detection
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 24e47df526f6..e7e2aa46218d 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1655,30 +1655,12 @@ static enum dc_status apply_single_controller_ctx_to_hw(
 
 static void power_down_encoders(struct dc *dc)
 {
-	int i, j;
+	int i;
 
 	for (i = 0; i < dc->link_count; i++) {
 		enum signal_type signal = dc->links[i]->connector_signal;
 
-		if ((signal == SIGNAL_TYPE_EDP) ||
-			(signal == SIGNAL_TYPE_DISPLAY_PORT)) {
-			if (dc->links[i]->link_enc->funcs->get_dig_frontend &&
-				dc->links[i]->link_enc->funcs->is_dig_enabled(dc->links[i]->link_enc)) {
-				unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
-									dc->links[i]->link_enc);
-
-				for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
-					if (fe == dc->res_pool->stream_enc[j]->id) {
-						dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
-									dc->res_pool->stream_enc[j]);
-						break;
-					}
-				}
-			}
-
-			if (!dc->links[i]->wa_flags.dp_keep_receiver_powered)
-				dp_receiver_power_ctrl(dc->links[i], false);
-		}
+		dc_link_blank_dp_stream(dc->links[i], false);
 
 		if (signal != SIGNAL_TYPE_EDP)
 			signal = SIGNAL_TYPE_NONE;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 0b788d794fb3..135e2b58cc73 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1366,7 +1366,7 @@ void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
 
 void dcn10_init_hw(struct dc *dc)
 {
-	int i, j;
+	int i;
 	struct abm *abm = dc->res_pool->abm;
 	struct dmcu *dmcu = dc->res_pool->dmcu;
 	struct dce_hwseq *hws = dc->hwseq;
@@ -1468,43 +1468,8 @@ void dcn10_init_hw(struct dc *dc)
 		dmub_enable_outbox_notification(dc);
 
 	/* we want to turn off all dp displays before doing detection */
-	if (dc->config.power_down_display_on_boot) {
-		uint8_t dpcd_power_state = '\0';
-		enum dc_status status = DC_ERROR_UNEXPECTED;
-
-		for (i = 0; i < dc->link_count; i++) {
-			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
-				continue;
-
-			/* DP 2.0 requires that LTTPR Caps be read first */
-			dp_retrieve_lttpr_cap(dc->links[i]);
-
-			/*
-			 * If any of the displays are lit up turn them off.
-			 * The reason is that some MST hubs cannot be turned off
-			 * completely until we tell them to do so.
-			 * If not turned off, then displays connected to MST hub
-			 * won't light up.
-			 */
-			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
-							&dpcd_power_state, sizeof(dpcd_power_state));
-			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
-				/* blank dp stream before power off receiver*/
-				if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
-					unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
-
-					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
-						if (fe == dc->res_pool->stream_enc[j]->id) {
-							dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
-										dc->res_pool->stream_enc[j]);
-							break;
-						}
-					}
-				}
-				dp_receiver_power_ctrl(dc->links[i], false);
-			}
-		}
-	}
+	if (dc->config.power_down_display_on_boot)
+		dc_link_blank_all_dp_displays(dc);
 
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index df2717116604..3e99bb9c70ab 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -437,7 +437,7 @@ void dcn30_init_hw(struct dc *dc)
 	struct dce_hwseq *hws = dc->hwseq;
 	struct dc_bios *dcb = dc->ctx->dc_bios;
 	struct resource_pool *res_pool = dc->res_pool;
-	int i, j;
+	int i;
 	int edp_num;
 	uint32_t backlight = MAX_BACKLIGHT_LEVEL;
 
@@ -534,41 +534,8 @@ void dcn30_init_hw(struct dc *dc)
 			hws->funcs.dsc_pg_control(hws, res_pool->dscs[i]->inst, false);
 
 	/* we want to turn off all dp displays before doing detection */
-	if (dc->config.power_down_display_on_boot) {
-		uint8_t dpcd_power_state = '\0';
-		enum dc_status status = DC_ERROR_UNEXPECTED;
-
-		for (i = 0; i < dc->link_count; i++) {
-			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
-				continue;
-			/* DP 2.0 states that LTTPR regs must be read first */
-			dp_retrieve_lttpr_cap(dc->links[i]);
-
-			/* if any of the displays are lit up turn them off */
-			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
-						     &dpcd_power_state, sizeof(dpcd_power_state));
-			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
-				/* blank dp stream before power off receiver*/
-				if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
-					unsigned int fe;
-
-					fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
-										dc->links[i]->link_enc);
-					if (fe == ENGINE_ID_UNKNOWN)
-						continue;
-
-					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
-						if (fe == dc->res_pool->stream_enc[j]->id) {
-							dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
-										dc->res_pool->stream_enc[j]);
-							break;
-						}
-					}
-				}
-				dp_receiver_power_ctrl(dc->links[i], false);
-			}
-		}
-	}
+	if (dc->config.power_down_display_on_boot)
+		dc_link_blank_all_dp_displays(dc);
 
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
index 5dd1ce9ddb53..bdaeb6ebdacb 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
@@ -112,7 +112,7 @@ void dcn31_init_hw(struct dc *dc)
 	struct dc_bios *dcb = dc->ctx->dc_bios;
 	struct resource_pool *res_pool = dc->res_pool;
 	uint32_t backlight = MAX_BACKLIGHT_LEVEL;
-	int i, j;
+	int i;
 
 	if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks)
 		dc->clk_mgr->funcs->init_clocks(dc->clk_mgr);
@@ -202,40 +202,8 @@ void dcn31_init_hw(struct dc *dc)
 		dmub_enable_outbox_notification(dc);
 
 	/* we want to turn off all dp displays before doing detection */
-	if (dc->config.power_down_display_on_boot) {
-		uint8_t dpcd_power_state = '\0';
-		enum dc_status status = DC_ERROR_UNEXPECTED;
-
-		for (i = 0; i < dc->link_count; i++) {
-			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
-				continue;
-
-			/* if any of the displays are lit up turn them off */
-			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
-						     &dpcd_power_state, sizeof(dpcd_power_state));
-			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
-				/* blank dp stream before power off receiver*/
-				if (dc->links[i]->ep_type == DISPLAY_ENDPOINT_PHY &&
-						dc->links[i]->link_enc->funcs->get_dig_frontend) {
-					unsigned int fe;
-
-					fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
-										dc->links[i]->link_enc);
-					if (fe == ENGINE_ID_UNKNOWN)
-						continue;
-
-					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
-						if (fe == dc->res_pool->stream_enc[j]->id) {
-							dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
-										dc->res_pool->stream_enc[j]);
-							break;
-						}
-					}
-				}
-				dp_receiver_power_ctrl(dc->links[i], false);
-			}
-		}
-	}
+	if (dc->config.power_down_display_on_boot)
+		dc_link_blank_all_dp_displays(dc);
 
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which