diff options
author | Andi Shyti <andi.shyti@intel.com> | 2019-09-27 12:08:49 +0100 |
---|---|---|
committer | Chris Wilson <chris@chris-wilson.co.uk> | 2019-09-27 13:01:57 +0100 |
commit | c113236718e89561f309705f1a78126b3df93a21 (patch) | |
tree | 87faf34a4ecbc91f639025e804ba7bac09ecd5d7 /drivers/gpu/drm/i915/intel_pm.c | |
parent | a3f56e7da5231c902925711940835b6716f63f73 (diff) | |
download | linux-stable-c113236718e89561f309705f1a78126b3df93a21.tar.gz linux-stable-c113236718e89561f309705f1a78126b3df93a21.tar.bz2 linux-stable-c113236718e89561f309705f1a78126b3df93a21.zip |
drm/i915: Extract GT render sleep (rc6) management
Continuing the theme of breaking intel_pm.c up in a reasonable chunk of
powermanagement utilities, pull out the rc6 setup into its GT handler.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919143840.20384-1-andi.shyti@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190927110849.28734-1-chris@chris-wilson.co.uk
Diffstat (limited to 'drivers/gpu/drm/i915/intel_pm.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_pm.c | 794 |
1 files changed, 3 insertions, 791 deletions
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 6bed2ed14574..bfcf03ab5245 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -45,26 +45,6 @@ #include "intel_sideband.h" #include "../../../platform/x86/intel_ips.h" -/** - * DOC: RC6 - * - * RC6 is a special power stage which allows the GPU to enter an very - * low-voltage mode when idle, using down to 0V while at this stage. This - * stage is entered automatically when the GPU is idle when RC6 support is - * enabled, and as soon as new workload arises GPU wakes up automatically as well. - * - * There are different RC6 modes available in Intel GPU, which differentiate - * among each other with the latency required to enter and leave RC6 and - * voltage consumed by the GPU in different states. - * - * The combination of the following flags define which states GPU is allowed - * to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and - * RC6pp is deepest RC6. Their support by hardware varies according to the - * GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one - * which brings the most power savings; deeper states save more power, but - * require higher latency to switch to and wake up. - */ - static void gen9_init_clock_gating(struct drm_i915_private *dev_priv) { if (HAS_LLC(dev_priv)) { @@ -6918,142 +6898,27 @@ int intel_set_rps(struct drm_i915_private *dev_priv, u8 val) return err; } -static void gen9_disable_rc6(struct drm_i915_private *dev_priv) -{ - I915_WRITE(GEN6_RC_CONTROL, 0); - I915_WRITE(GEN9_PG_ENABLE, 0); -} - static void gen9_disable_rps(struct drm_i915_private *dev_priv) { I915_WRITE(GEN6_RP_CONTROL, 0); } -static void gen6_disable_rc6(struct drm_i915_private *dev_priv) -{ - I915_WRITE(GEN6_RC_CONTROL, 0); -} - static void gen6_disable_rps(struct drm_i915_private *dev_priv) { I915_WRITE(GEN6_RPNSWREQ, 1 << 31); I915_WRITE(GEN6_RP_CONTROL, 0); } -static void cherryview_disable_rc6(struct drm_i915_private *dev_priv) -{ - I915_WRITE(GEN6_RC_CONTROL, 0); -} - static void cherryview_disable_rps(struct drm_i915_private *dev_priv) { I915_WRITE(GEN6_RP_CONTROL, 0); } -static void valleyview_disable_rc6(struct drm_i915_private *dev_priv) -{ - /* We're doing forcewake before Disabling RC6, - * This what the BIOS expects when going into suspend */ - intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); - - I915_WRITE(GEN6_RC_CONTROL, 0); - - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); -} - static void valleyview_disable_rps(struct drm_i915_private *dev_priv) { I915_WRITE(GEN6_RP_CONTROL, 0); } -static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv) -{ - bool enable_rc6 = true; - unsigned long rc6_ctx_base; - u32 rc_ctl; - int rc_sw_target; - - rc_ctl = I915_READ(GEN6_RC_CONTROL); - rc_sw_target = (I915_READ(GEN6_RC_STATE) & RC_SW_TARGET_STATE_MASK) >> - RC_SW_TARGET_STATE_SHIFT; - DRM_DEBUG_DRIVER("BIOS enabled RC states: " - "HW_CTRL %s HW_RC6 %s SW_TARGET_STATE %x\n", - onoff(rc_ctl & GEN6_RC_CTL_HW_ENABLE), - onoff(rc_ctl & GEN6_RC_CTL_RC6_ENABLE), - rc_sw_target); - - if (!(I915_READ(RC6_LOCATION) & RC6_CTX_IN_DRAM)) { - DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n"); - enable_rc6 = false; - } - - /* - * The exact context size is not known for BXT, so assume a page size - * for this check. - */ - rc6_ctx_base = I915_READ(RC6_CTX_BASE) & RC6_CTX_BASE_MASK; - if (!((rc6_ctx_base >= dev_priv->dsm_reserved.start) && - (rc6_ctx_base + PAGE_SIZE < dev_priv->dsm_reserved.end))) { - DRM_DEBUG_DRIVER("RC6 Base address not as expected.\n"); - enable_rc6 = false; - } - - if (!(((I915_READ(PWRCTX_MAXCNT_RCSUNIT) & IDLE_TIME_MASK) > 1) && - ((I915_READ(PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1) && - ((I915_READ(PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1) && - ((I915_READ(PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1))) { - DRM_DEBUG_DRIVER("Engine Idle wait time not set properly.\n"); - enable_rc6 = false; - } - - if (!I915_READ(GEN8_PUSHBUS_CONTROL) || - !I915_READ(GEN8_PUSHBUS_ENABLE) || - !I915_READ(GEN8_PUSHBUS_SHIFT)) { - DRM_DEBUG_DRIVER("Pushbus not setup properly.\n"); - enable_rc6 = false; - } - - if (!I915_READ(GEN6_GFXPAUSE)) { - DRM_DEBUG_DRIVER("GFX pause not setup properly.\n"); - enable_rc6 = false; - } - - if (!I915_READ(GEN8_MISC_CTRL0)) { - DRM_DEBUG_DRIVER("GPM control not setup properly.\n"); - enable_rc6 = false; - } - - return enable_rc6; -} - -static bool sanitize_rc6(struct drm_i915_private *i915) -{ - struct intel_device_info *info = mkwrite_device_info(i915); - - /* Powersaving is controlled by the host when inside a VM */ - if (intel_vgpu_active(i915)) { - info->has_rc6 = 0; - info->has_rps = false; - } - - if (info->has_rc6 && - IS_GEN9_LP(i915) && !bxt_check_bios_rc6_setup(i915)) { - DRM_INFO("RC6 disabled by BIOS\n"); - info->has_rc6 = 0; - } - - /* - * We assume that we do not have any deep rc6 levels if we don't have - * have the previous rc6 level supported, i.e. we use HAS_RC6() - * as the initial coarse check for rc6 in general, moving on to - * progressively finer/deeper levels. - */ - if (!info->has_rc6 && info->has_rc6p) - info->has_rc6p = 0; - - return info->has_rc6; -} - static void gen6_init_rps_frequencies(struct drm_i915_private *dev_priv) { struct intel_rps *rps = &dev_priv->gt_pm.rps; @@ -7140,203 +7005,6 @@ static void gen9_enable_rps(struct drm_i915_private *dev_priv) intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); } -static void gen11_enable_rc6(struct drm_i915_private *dev_priv) -{ - struct intel_engine_cs *engine; - enum intel_engine_id id; - - /* 1a: Software RC state - RC0 */ - I915_WRITE(GEN6_RC_STATE, 0); - - /* - * 1b: Get forcewake during program sequence. Although the driver - * hasn't enabled a state yet where we need forcewake, BIOS may have. - */ - intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); - - /* 2a: Disable RC states. */ - I915_WRITE(GEN6_RC_CONTROL, 0); - - /* 2b: Program RC6 thresholds.*/ - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16 | 85); - I915_WRITE(GEN10_MEDIA_WAKE_RATE_LIMIT, 150); - - I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ - I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ - for_each_engine(engine, dev_priv, id) - I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10); - - if (HAS_GT_UC(dev_priv)) - I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA); - - I915_WRITE(GEN6_RC_SLEEP, 0); - - I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */ - - /* - * 2c: Program Coarse Power Gating Policies. - * - * Bspec's guidance is to use 25us (really 25 * 1280ns) here. What we - * use instead is a more conservative estimate for the maximum time - * it takes us to service a CS interrupt and submit a new ELSP - that - * is the time which the GPU is idle waiting for the CPU to select the - * next request to execute. If the idle hysteresis is less than that - * interrupt service latency, the hardware will automatically gate - * the power well and we will then incur the wake up cost on top of - * the service latency. A similar guide from plane_state is that we - * do not want the enable hysteresis to less than the wakeup latency. - * - * igt/gem_exec_nop/sequential provides a rough estimate for the - * service latency, and puts it around 10us for Broadwell (and other - * big core) and around 40us for Broxton (and other low power cores). - * [Note that for legacy ringbuffer submission, this is less than 1us!] - * However, the wakeup latency on Broxton is closer to 100us. To be - * conservative, we have to factor in a context switch on top (due - * to ksoftirqd). - */ - I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 250); - I915_WRITE(GEN9_RENDER_PG_IDLE_HYSTERESIS, 250); - - /* 3a: Enable RC6 */ - I915_WRITE(GEN6_RC_CONTROL, - GEN6_RC_CTL_HW_ENABLE | - GEN6_RC_CTL_RC6_ENABLE | - GEN6_RC_CTL_EI_MODE(1)); - - /* 3b: Enable Coarse Power Gating only when RC6 is enabled. */ - I915_WRITE(GEN9_PG_ENABLE, - GEN9_RENDER_PG_ENABLE | - GEN9_MEDIA_PG_ENABLE | - GEN11_MEDIA_SAMPLER_PG_ENABLE); - - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); -} - -static void gen9_enable_rc6(struct drm_i915_private *dev_priv) -{ - struct intel_engine_cs *engine; - enum intel_engine_id id; - u32 rc6_mode; - - /* 1a: Software RC state - RC0 */ - I915_WRITE(GEN6_RC_STATE, 0); - - /* 1b: Get forcewake during program sequence. Although the driver - * hasn't enabled a state yet where we need forcewake, BIOS may have.*/ - intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); - - /* 2a: Disable RC states. */ - I915_WRITE(GEN6_RC_CONTROL, 0); - - /* 2b: Program RC6 thresholds.*/ - if (INTEL_GEN(dev_priv) >= 10) { - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16 | 85); - I915_WRITE(GEN10_MEDIA_WAKE_RATE_LIMIT, 150); - } else if (IS_SKYLAKE(dev_priv)) { - /* - * WaRsDoubleRc6WrlWithCoarsePowerGating:skl Doubling WRL only - * when CPG is enabled - */ - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 108 << 16); - } else { - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16); - } - - I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ - I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ - for_each_engine(engine, dev_priv, id) - I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10); - - if (HAS_GT_UC(dev_priv)) - I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA); - - I915_WRITE(GEN6_RC_SLEEP, 0); - - /* - * 2c: Program Coarse Power Gating Policies. - * - * Bspec's guidance is to use 25us (really 25 * 1280ns) here. What we - * use instead is a more conservative estimate for the maximum time - * it takes us to service a CS interrupt and submit a new ELSP - that - * is the time which the GPU is idle waiting for the CPU to select the - * next request to execute. If the idle hysteresis is less than that - * interrupt service latency, the hardware will automatically gate - * the power well and we will then incur the wake up cost on top of - * the service latency. A similar guide from plane_state is that we - * do not want the enable hysteresis to less than the wakeup latency. - * - * igt/gem_exec_nop/sequential provides a rough estimate for the - * service latency, and puts it around 10us for Broadwell (and other - * big core) and around 40us for Broxton (and other low power cores). - * [Note that for legacy ringbuffer submission, this is less than 1us!] - * However, the wakeup latency on Broxton is closer to 100us. To be - * conservative, we have to factor in a context switch on top (due - * to ksoftirqd). - */ - I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 250); - I915_WRITE(GEN9_RENDER_PG_IDLE_HYSTERESIS, 250); - - /* 3a: Enable RC6 */ - I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ - - /* WaRsUseTimeoutMode:cnl (pre-prod) */ - if (IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_C0)) - rc6_mode = GEN7_RC_CTL_TO_MODE; - else - rc6_mode = GEN6_RC_CTL_EI_MODE(1); - - I915_WRITE(GEN6_RC_CONTROL, - GEN6_RC_CTL_HW_ENABLE | - GEN6_RC_CTL_RC6_ENABLE | - rc6_mode); - - /* - * 3b: Enable Coarse Power Gating only when RC6 is enabled. - * WaRsDisableCoarsePowerGating:skl,cnl - Render/Media PG need to be disabled with RC6. - */ - if (NEEDS_WaRsDisableCoarsePowerGating(dev_priv)) - I915_WRITE(GEN9_PG_ENABLE, 0); - else - I915_WRITE(GEN9_PG_ENABLE, - GEN9_RENDER_PG_ENABLE | GEN9_MEDIA_PG_ENABLE); - - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); -} - -static void gen8_enable_rc6(struct drm_i915_private *dev_priv) -{ - struct intel_engine_cs *engine; - enum intel_engine_id id; - - /* 1a: Software RC state - RC0 */ - I915_WRITE(GEN6_RC_STATE, 0); - - /* 1b: Get forcewake during program sequence. Although the driver - * hasn't enabled a state yet where we need forcewake, BIOS may have.*/ - intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); - - /* 2a: Disable RC states. */ - I915_WRITE(GEN6_RC_CONTROL, 0); - - /* 2b: Program RC6 thresholds.*/ - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16); - I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ - I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ - for_each_engine(engine, dev_priv, id) - I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10); - I915_WRITE(GEN6_RC_SLEEP, 0); - I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us/1.28 for TO */ - - /* 3: Enable RC6 */ - - I915_WRITE(GEN6_RC_CONTROL, - GEN6_RC_CTL_HW_ENABLE | - GEN7_RC_CTL_TO_MODE | - GEN6_RC_CTL_RC6_ENABLE); - - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); -} - static void gen8_enable_rps(struct drm_i915_private *dev_priv) { struct intel_rps *rps = &dev_priv->gt_pm.rps; @@ -7377,75 +7045,6 @@ static void gen8_enable_rps(struct drm_i915_private *dev_priv) intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); } -static void gen6_enable_rc6(struct drm_i915_private *dev_priv) -{ - struct intel_engine_cs *engine; - enum intel_engine_id id; - u32 rc6vids, rc6_mask; - u32 gtfifodbg; - int ret; - - I915_WRITE(GEN6_RC_STATE, 0); - - /* Clear the DBG now so we don't confuse earlier errors */ - gtfifodbg = I915_READ(GTFIFODBG); - if (gtfifodbg) { - DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg); - I915_WRITE(GTFIFODBG, gtfifodbg); - } - - intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); - - /* disable the counters and set deterministic thresholds */ - I915_WRITE(GEN6_RC_CONTROL, 0); - - I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16); - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30); - I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30); - I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); - I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); - - for_each_engine(engine, dev_priv, id) - I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10); - - I915_WRITE(GEN6_RC_SLEEP, 0); - I915_WRITE(GEN6_RC1e_THRESHOLD, 1000); - if (IS_IVYBRIDGE(dev_priv)) - I915_WRITE(GEN6_RC6_THRESHOLD, 125000); - else - I915_WRITE(GEN6_RC6_THRESHOLD, 50000); - I915_WRITE(GEN6_RC6p_THRESHOLD, 150000); - I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ - - /* We don't use those on Haswell */ - rc6_mask = GEN6_RC_CTL_RC6_ENABLE; - if (HAS_RC6p(dev_priv)) - rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE; - if (HAS_RC6pp(dev_priv)) - rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE; - I915_WRITE(GEN6_RC_CONTROL, - rc6_mask | - GEN6_RC_CTL_EI_MODE(1) | - GEN6_RC_CTL_HW_ENABLE); - - rc6vids = 0; - ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, - &rc6vids, NULL); - if (IS_GEN(dev_priv, 6) && ret) { - DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n"); - } else if (IS_GEN(dev_priv, 6) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) { - DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n", - GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450); - rc6vids &= 0xffff00; - rc6vids |= GEN6_ENCODE_RC6_VID(450); - ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_RC6VIDS, rc6vids); - if (ret) - DRM_ERROR("Couldn't fix incorrect rc6 voltage\n"); - } - - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); -} - static void gen6_enable_rps(struct drm_i915_private *dev_priv) { /* Here begins a magic sequence of register writes to enable @@ -7662,100 +7261,6 @@ static int valleyview_rps_min_freq(struct drm_i915_private *dev_priv) return max_t(u32, val, 0xc0); } -/* Check that the pctx buffer wasn't move under us. */ -static void valleyview_check_pctx(struct drm_i915_private *dev_priv) -{ - unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095; - - WARN_ON(pctx_addr != dev_priv->dsm.start + - dev_priv->vlv_pctx->stolen->start); -} - - -/* Check that the pcbr address is not empty. */ -static void cherryview_check_pctx(struct drm_i915_private *dev_priv) -{ - unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095; - - WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0); -} - -static void cherryview_setup_pctx(struct drm_i915_private *dev_priv) -{ - resource_size_t pctx_paddr, paddr; - resource_size_t pctx_size = 32*1024; - u32 pcbr; - - pcbr = I915_READ(VLV_PCBR); - if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) { - DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n"); - paddr = dev_priv->dsm.end + 1 - pctx_size; - GEM_BUG_ON(paddr > U32_MAX); - - pctx_paddr = (paddr & (~4095)); - I915_WRITE(VLV_PCBR, pctx_paddr); - } - - DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR)); -} - -static void valleyview_setup_pctx(struct drm_i915_private *dev_priv) -{ - struct drm_i915_gem_object *pctx; - resource_size_t pctx_paddr; - resource_size_t pctx_size = 24*1024; - u32 pcbr; - - pcbr = I915_READ(VLV_PCBR); - if (pcbr) { - /* BIOS set it up already, grab the pre-alloc'd space */ - resource_size_t pcbr_offset; - - pcbr_offset = (pcbr & (~4095)) - dev_priv->dsm.start; - pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv, - pcbr_offset, - I915_GTT_OFFSET_NONE, - pctx_size); - goto out; - } - - DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n"); - - /* - * From the Gunit register HAS: - * The Gfx driver is expected to program this register and ensure - * proper allocation within Gfx stolen memory. For example, this - * register should be programmed such than the PCBR range does not - * overlap with other ranges, such as the frame buffer, protected - * memory, or any other relevant ranges. - */ - pctx = i915_gem_object_create_stolen(dev_priv, pctx_size); - if (!pctx) { - DRM_DEBUG("not enough stolen space for PCTX, disabling\n"); - goto out; - } - - GEM_BUG_ON(range_overflows_t(u64, - dev_priv->dsm.start, - pctx->stolen->start, - U32_MAX)); - pctx_paddr = dev_priv->dsm.start + pctx->stolen->start; - I915_WRITE(VLV_PCBR, pctx_paddr); - -out: - DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR)); - dev_priv->vlv_pctx = pctx; -} - -static void valleyview_cleanup_pctx(struct drm_i915_private *dev_priv) -{ - struct drm_i915_gem_object *pctx; - - pctx = fetch_and_zero(&dev_priv->vlv_pctx); - if (pctx) - i915_gem_object_put(pctx); -} - static void vlv_init_gpll_ref_freq(struct drm_i915_private *dev_priv) { dev_priv->gt_pm.rps.gpll_ref_freq = @@ -7772,8 +7277,6 @@ static void valleyview_init_gt_powersave(struct drm_i915_private *dev_priv) struct intel_rps *rps = &dev_priv->gt_pm.rps; u32 val; - valleyview_setup_pctx(dev_priv); - vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_PUNIT) | BIT(VLV_IOSF_SB_NC) | @@ -7828,8 +7331,6 @@ static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv) struct intel_rps *rps = &dev_priv->gt_pm.rps; u32 val; - cherryview_setup_pctx(dev_priv); - vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_PUNIT) | BIT(VLV_IOSF_SB_NC) | @@ -7880,64 +7381,6 @@ static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv) "Odd GPU freq values\n"); } -static void valleyview_cleanup_gt_powersave(struct drm_i915_private *dev_priv) -{ - valleyview_cleanup_pctx(dev_priv); -} - -static void cherryview_enable_rc6(struct drm_i915_private *dev_priv) -{ - struct intel_engine_cs *engine; - enum intel_engine_id id; - u32 gtfifodbg, rc6_mode, pcbr; - - gtfifodbg = I915_READ(GTFIFODBG) & ~(GT_FIFO_SBDEDICATE_FREE_ENTRY_CHV | - GT_FIFO_FREE_ENTRIES_CHV); - if (gtfifodbg) { - DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n", - gtfifodbg); - I915_WRITE(GTFIFODBG, gtfifodbg); - } - - cherryview_check_pctx(dev_priv); - - /* 1a & 1b: Get forcewake during program sequence. Although the driver - * hasn't enabled a state yet where we need forcewake, BIOS may have.*/ - intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); - - /* Disable RC states. */ - I915_WRITE(GEN6_RC_CONTROL, 0); - - /* 2a: Program RC6 thresholds.*/ - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16); - I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */ - I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */ - - for_each_engine(engine, dev_priv, id) - I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10); - I915_WRITE(GEN6_RC_SLEEP, 0); - - /* TO threshold set to 500 us ( 0x186 * 1.28 us) */ - I915_WRITE(GEN6_RC6_THRESHOLD, 0x186); - - /* Allows RC6 residency counter to work */ - I915_WRITE(VLV_COUNTER_CONTROL, - _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH | - VLV_MEDIA_RC6_COUNT_EN | - VLV_RENDER_RC6_COUNT_EN)); - - /* For now we assume BIOS is allocating and populating the PCBR */ - pcbr = I915_READ(VLV_PCBR); - - /* 3: Enable RC6 */ - rc6_mode = 0; - if (pcbr >> VLV_PCBR_ADDR_SHIFT) - rc6_mode = GEN7_RC_CTL_TO_MODE; - I915_WRITE(GEN6_RC_CONTROL, rc6_mode); - - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); -} - static void cherryview_enable_rps(struct drm_i915_private *dev_priv) { u32 val; @@ -7982,49 +7425,6 @@ static void cherryview_enable_rps(struct drm_i915_private *dev_priv) intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); } -static void valleyview_enable_rc6(struct drm_i915_private *dev_priv) -{ - struct intel_engine_cs *engine; - enum intel_engine_id id; - u32 gtfifodbg; - - valleyview_check_pctx(dev_priv); - - gtfifodbg = I915_READ(GTFIFODBG); - if (gtfifodbg) { - DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n", - gtfifodbg); - I915_WRITE(GTFIFODBG, gtfifodbg); - } - - intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); - - /* Disable RC states. */ - I915_WRITE(GEN6_RC_CONTROL, 0); - - I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000); - I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); - I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); - - for_each_engine(engine, dev_priv, id) - I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10); - - I915_WRITE(GEN6_RC6_THRESHOLD, 0x557); - - /* Allows RC6 residency counter to work */ - I915_WRITE(VLV_COUNTER_CONTROL, - _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH | - VLV_MEDIA_RC0_COUNT_EN | - VLV_RENDER_RC0_COUNT_EN | - VLV_MEDIA_RC6_COUNT_EN | - VLV_RENDER_RC6_COUNT_EN)); - - I915_WRITE(GEN6_RC_CONTROL, - GEN7_RC_CTL_TO_MODE | VLV_RC_CTL_CTX_RST_PARALLEL); - - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); -} - static void valleyview_enable_rps(struct drm_i915_private *dev_priv) { u32 val; @@ -8551,14 +7951,9 @@ void intel_init_gt_powersave(struct drm_i915_private *dev_priv) { struct intel_rps *rps = &dev_priv->gt_pm.rps; - /* - * RPM depends on RC6 to save restore the GT HW context, so make RC6 a - * requirement. - */ - if (!sanitize_rc6(dev_priv)) { - DRM_INFO("RC6 disabled, disabling runtime PM support\n"); - pm_runtime_get(&dev_priv->drm.pdev->dev); - } + /* Powersaving is controlled by the host when inside a VM */ + if (intel_vgpu_active(dev_priv)) + mkwrite_device_info(dev_priv)->has_rps = false; /* Initialize RPS limits (for userspace) */ if (IS_CHERRYVIEW(dev_priv)) @@ -8593,19 +7988,9 @@ void intel_init_gt_powersave(struct drm_i915_private *dev_priv) rps->cur_freq = rps->idle_freq; } -void intel_cleanup_gt_powersave(struct drm_i915_private *dev_priv) -{ - if (IS_VALLEYVIEW(dev_priv)) - valleyview_cleanup_gt_powersave(dev_priv); - - if (!HAS_RC6(dev_priv)) - pm_runtime_put(&dev_priv->drm.pdev->dev); -} - void intel_sanitize_gt_powersave(struct drm_i915_private *dev_priv) { dev_priv->gt_pm.rps.enabled = true; /* force RPS disabling */ - dev_priv->gt_pm.rc6.enabled = true; /* force RC6 disabling */ intel_disable_gt_powersave(dev_priv); if (INTEL_GEN(dev_priv) >= 11) @@ -8626,25 +8011,6 @@ static inline void intel_disable_llc_pstate(struct drm_i915_private *i915) i915->gt_pm.llc_pstate.enabled = false; } -static void intel_disable_rc6(struct drm_i915_private *dev_priv) -{ - lockdep_assert_held(&dev_priv->gt_pm.rps.lock); - - if (!dev_priv->gt_pm.rc6.enabled) - return; - - if (INTEL_GEN(dev_priv) >= 9) - gen9_disable_rc6(dev_priv); - else if (IS_CHERRYVIEW(dev_priv)) - cherryview_disable_rc6(dev_priv); - else if (IS_VALLEYVIEW(dev_priv)) - valleyview_disable_rc6(dev_priv); - else if (INTEL_GEN(dev_priv) >= 6) - gen6_disable_rc6(dev_priv); - - dev_priv->gt_pm.rc6.enabled = false; -} - static void intel_disable_rps(struct drm_i915_private *dev_priv) { lockdep_assert_held(&dev_priv->gt_pm.rps.lock); @@ -8670,8 +8036,6 @@ void intel_disable_gt_powersave(struct drm_i915_private *dev_priv) { mutex_lock(&dev_priv->gt_pm.rps.lock); - intel_disable_rc6(dev_priv); - intel_disable_rps(dev_priv); if (HAS_LLC(dev_priv)) intel_disable_llc_pstate(dev_priv); @@ -8691,29 +8055,6 @@ static inline void intel_enable_llc_pstate(struct drm_i915_private *i915) i915->gt_pm.llc_pstate.enabled = true; } -static void intel_enable_rc6(struct drm_i915_private *dev_priv) -{ - lockdep_assert_held(&dev_priv->gt_pm.rps.lock); - - if (dev_priv->gt_pm.rc6.enabled) - return; - - if (IS_CHERRYVIEW(dev_priv)) - cherryview_enable_rc6(dev_priv); - else if (IS_VALLEYVIEW(dev_priv)) - valleyview_enable_rc6(dev_priv); - else if (INTEL_GEN(dev_priv) >= 11) - gen11_enable_rc6(dev_priv); - else if (INTEL_GEN(dev_priv) >= 9) - gen9_enable_rc6(dev_priv); - else if (IS_BROADWELL(dev_priv)) - gen8_enable_rc6(dev_priv); - else if (INTEL_GEN(dev_priv) >= 6) - gen6_enable_rc6(dev_priv); - - dev_priv->gt_pm.rc6.enabled = true; -} - static void intel_enable_rps(struct drm_i915_private *dev_priv) { struct intel_rps *rps = &dev_priv->gt_pm.rps; @@ -8755,8 +8096,6 @@ void intel_enable_gt_powersave(struct drm_i915_private *dev_priv) mutex_lock(&dev_priv->gt_pm.rps.lock); - if (HAS_RC6(dev_priv)) - intel_enable_rc6(dev_priv); if (HAS_RPS(dev_priv)) intel_enable_rps(dev_priv); if (HAS_LLC(dev_priv)) @@ -9818,133 +9157,6 @@ void intel_pm_setup(struct drm_i915_private *dev_priv) atomic_set(&dev_priv->runtime_pm.wakeref_count, 0); } -static u64 vlv_residency_raw(struct drm_i915_private *dev_priv, - const i915_reg_t reg) -{ - u32 lower, upper, tmp; - int loop = 2; - - /* - * The register accessed do not need forcewake. We borrow - * uncore lock to prevent concurrent access to range reg. - */ - lockdep_assert_held(&dev_priv->uncore.lock); - - /* - * vlv and chv residency counters are 40 bits in width. - * With a control bit, we can choose between upper or lower - * 32bit window into this counter. - * - * Although we always use the counter in high-range mode elsewhere, - * userspace may attempt to read the value before rc6 is initialised, - * before we have set the default VLV_COUNTER_CONTROL value. So always - * set the high bit to be safe. - */ - I915_WRITE_FW(VLV_COUNTER_CONTROL, - _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH)); - upper = I915_READ_FW(reg); - do { - tmp = upper; - - I915_WRITE_FW(VLV_COUNTER_CONTROL, - _MASKED_BIT_DISABLE(VLV_COUNT_RANGE_HIGH)); - lower = I915_READ_FW(reg); - - I915_WRITE_FW(VLV_COUNTER_CONTROL, - _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH)); - upper = I915_READ_FW(reg); - } while (upper != tmp && --loop); - - /* - * Everywhere else we always use VLV_COUNTER_CONTROL with the - * VLV_COUNT_RANGE_HIGH bit set - so it is safe to leave it set - * now. - */ - - return lower | (u64)upper << 8; -} - -u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv, - const i915_reg_t reg) -{ - struct intel_uncore *uncore = &dev_priv->uncore; - u64 time_hw, prev_hw, overflow_hw; - unsigned int fw_domains; - unsigned long flags; - unsigned int i; - u32 mul, div; - - if (!HAS_RC6(dev_priv)) - return 0; - - /* - * Store previous hw counter values for counter wrap-around handling. - * - * There are only four interesting registers and they live next to each - * other so we can use the relative address, compared to the smallest - * one as the index into driver storage. - */ - i = (i915_mmio_reg_offset(reg) - - i915_mmio_reg_offset(GEN6_GT_GFX_RC6_LOCKED)) / sizeof(u32); - if (WARN_ON_ONCE(i >= ARRAY_SIZE(dev_priv->gt_pm.rc6.cur_residency))) - return 0; - - fw_domains = intel_uncore_forcewake_for_reg(uncore, reg, FW_REG_READ); - - spin_lock_irqsave(&uncore->lock, flags); - intel_uncore_forcewake_get__locked(uncore, fw_domains); - - /* On VLV and CHV, residency time is in CZ units rather than 1.28us */ - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { - mul = 1000000; - div = dev_priv->czclk_freq; - overflow_hw = BIT_ULL(40); - time_hw = vlv_residency_raw(dev_priv, reg); - } else { - /* 833.33ns units on Gen9LP, 1.28us elsewhere. */ - if (IS_GEN9_LP(dev_priv)) { - mul = 10000; - div = 12; - } else { - mul = 1280; - div = 1; - } - - overflow_hw = BIT_ULL(32); - time_hw = intel_uncore_read_fw(uncore, reg); - } - - /* - * Counter wrap handling. - * - * But relying on a sufficient frequency of queries otherwise counters - * can still wrap. - */ - prev_hw = dev_priv->gt_pm.rc6.prev_hw_residency[i]; - dev_priv->gt_pm.rc6.prev_hw_residency[i] = time_hw; - - /* RC6 delta from last sample. */ - if (time_hw >= prev_hw) - time_hw -= prev_hw; - else - time_hw += overflow_hw - prev_hw; - - /* Add delta to RC6 extended raw driver copy. */ - time_hw += dev_priv->gt_pm.rc6.cur_residency[i]; - dev_priv->gt_pm.rc6.cur_residency[i] = time_hw; - - intel_uncore_forcewake_put__locked(uncore, fw_domains); - spin_unlock_irqrestore(&uncore->lock, flags); - - return mul_u64_u32_div(time_hw, mul, div); -} - -u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv, - i915_reg_t reg) -{ - return DIV_ROUND_UP_ULL(intel_rc6_residency_ns(dev_priv, reg), 1000); -} - u32 intel_get_cagf(struct drm_i915_private *dev_priv, u32 rpstat) { u32 cagf; |