drm: stm: implement get_scanout_position function

Hardware allow to read the position in scanout buffer so
we can use this information to make wait of vblank more accurate.

Active area bounds (start, end, total height) have already been
computed and written in ltdc registers, read them and get the
current line position to compute vpos value.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629130140.16004-1-benjamin.gaignard@linaro.org

1 files changed, 45 insertions, 0 deletions

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 808d9fb627e9..61dd661aa0ac 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -148,6 +148,8 @@
 #define IER_TERRIE	BIT(2)		/* Transfer ERRor Interrupt Enable */
 #define IER_RRIE	BIT(3)		/* Register Reload Interrupt enable */
 
+#define CPSR_CYPOS	GENMASK(15, 0)	/* Current Y position */
+
 #define ISR_LIF		BIT(0)		/* Line Interrupt Flag */
 #define ISR_FUIF	BIT(1)		/* Fifo Underrun Interrupt Flag */
 #define ISR_TERRIF	BIT(2)		/* Transfer ERRor Interrupt Flag */
@@ -626,6 +628,49 @@ static void ltdc_crtc_disable_vblank(struct drm_crtc *crtc)
 	reg_clear(ldev->regs, LTDC_IER, IER_LIE);
 }
 
+bool ltdc_crtc_scanoutpos(struct drm_device *ddev, unsigned int pipe,
+			  bool in_vblank_irq, int *vpos, int *hpos,
+			  ktime_t *stime, ktime_t *etime,
+			  const struct drm_display_mode *mode)
+{
+	struct ltdc_device *ldev = ddev->dev_private;
+	int line, vactive_start, vactive_end, vtotal;
+
+	if (stime)
+		*stime = ktime_get();
+
+	/* The active area starts after vsync + front porch and ends
+	 * at vsync + front porc + display size.
+	 * The total height also include back porch.
+	 * We have 3 possible cases to handle:
+	 * - line < vactive_start: vpos = line - vactive_start and will be
+	 * negative
+	 * - vactive_start < line < vactive_end: vpos = line - vactive_start
+	 * and will be positive
+	 * - line > vactive_end: vpos = line - vtotal - vactive_start
+	 * and will negative
+	 *
+	 * Computation for the two first cases are identical so we can
+	 * simplify the code and only test if line > vactive_end
+	 */
+	line = reg_read(ldev->regs, LTDC_CPSR) & CPSR_CYPOS;
+	vactive_start = reg_read(ldev->regs, LTDC_BPCR) & BPCR_AVBP;
+	vactive_end = reg_read(ldev->regs, LTDC_AWCR) & AWCR_AAH;
+	vtotal = reg_read(ldev->regs, LTDC_TWCR) & TWCR_TOTALH;
+
+	if (line > vactive_end)
+		*vpos = line - vtotal - vactive_start;
+	else
+		*vpos = line - vactive_start;
+
+	*hpos = 0;
+
+	if (etime)
+		*etime = ktime_get();
+
+	return true;
+}
+
 static const struct drm_crtc_funcs ltdc_crtc_funcs = {
 	.destroy = drm_crtc_cleanup,
 	.set_config = drm_atomic_helper_set_config,