summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2014-01-11 00:23:59 +0100
committerWolfram Sang <wsa@the-dreams.de>2014-01-13 13:56:56 +0100
commit83e53a8f120f2f273cf0ad717f5372ab79ac24fe (patch)
tree6c5934ce87dec5a66f618b2631d421b386555216 /drivers/i2c
parente5c6e7f296e17011848732b5a26b8251db59595b (diff)
downloadlinux-stable-83e53a8f120f2f273cf0ad717f5372ab79ac24fe.tar.gz
linux-stable-83e53a8f120f2f273cf0ad717f5372ab79ac24fe.tar.bz2
linux-stable-83e53a8f120f2f273cf0ad717f5372ab79ac24fe.zip
i2c: Add bus driver for for OSIF USB i2c device.
OSIF, Open Source InterFace, is a USB based i2c bus master. The origional design was based on i2c-tiny-usb, but more modern versions of the firmware running on the MegaAVR microcontroller use a different protocol over the USB. This code is based on Barry Carter <barry.carter@gmail.com> driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-robotfuzz-osif.c202
3 files changed, 213 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 98a3f1ffc3b7..6bcdea5856af 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -874,6 +874,16 @@ config I2C_PARPORT_LIGHT
This support is also available as a module. If so, the module
will be called i2c-parport-light.
+config I2C_ROBOTFUZZ_OSIF
+ tristate "RobotFuzz Open Source InterFace USB adapter"
+ depends on USB
+ help
+ If you say yes to this option, support will be included for the
+ RobotFuzz Open Source InterFace USB to I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-osif.
+
config I2C_TAOS_EVM
tristate "TAOS evaluation module"
depends on TTY
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index dca041b1b99d..a08931fe73e1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
+obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
new file mode 100644
index 000000000000..ced9c6a308d1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -0,0 +1,202 @@
+/*
+ * Driver for RobotFuzz OSIF
+ *
+ * Copyright (c) 2013 Andrew Lunn <andrew@lunn.ch>
+ * Copyright (c) 2007 Barry Carter <Barry.Carter@robotfuzz.com>
+ *
+ * Based on the i2c-tiny-usb by
+ *
+ * Copyright (C) 2006 Til Harbaum (Till@Harbaum.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#define OSIFI2C_READ 20
+#define OSIFI2C_WRITE 21
+#define OSIFI2C_STOP 22
+#define OSIFI2C_STATUS 23
+#define OSIFI2C_SET_BIT_RATE 24
+
+#define STATUS_ADDRESS_ACK 0
+#define STATUS_ADDRESS_NAK 2
+
+struct osif_priv {
+ struct usb_device *usb_dev;
+ struct usb_interface *interface;
+ struct i2c_adapter adapter;
+ unsigned char status;
+};
+
+static int osif_usb_read(struct i2c_adapter *adapter, int cmd,
+ int value, int index, void *data, int len)
+{
+ struct osif_priv *priv = adapter->algo_data;
+
+ return usb_control_msg(priv->usb_dev, usb_rcvctrlpipe(priv->usb_dev, 0),
+ cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_IN, value, index, data, len, 2000);
+}
+
+static int osif_usb_write(struct i2c_adapter *adapter, int cmd,
+ int value, int index, void *data, int len)
+{
+
+ struct osif_priv *priv = adapter->algo_data;
+
+ return usb_control_msg(priv->usb_dev, usb_sndctrlpipe(priv->usb_dev, 0),
+ cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ value, index, data, len, 2000);
+}
+
+static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
+ int num)
+{
+ struct osif_priv *priv = adapter->algo_data;
+ struct i2c_msg *pmsg;
+ int ret = 0;
+ int i, cmd;
+
+ for (i = 0; ret >= 0 && i < num; i++) {
+ pmsg = &msgs[i];
+
+ if (pmsg->flags & I2C_M_RD) {
+ cmd = OSIFI2C_READ;
+
+ ret = osif_usb_read(adapter, cmd, pmsg->flags,
+ pmsg->addr, pmsg->buf,
+ pmsg->len);
+ if (ret != pmsg->len) {
+ dev_err(&adapter->dev, "failure reading data\n");
+ return -EREMOTEIO;
+ }
+ } else {
+ cmd = OSIFI2C_WRITE;
+
+ ret = osif_usb_write(adapter, cmd, pmsg->flags,
+ pmsg->addr, pmsg->buf, pmsg->len);
+ if (ret != pmsg->len) {
+ dev_err(&adapter->dev, "failure writing data\n");
+ return -EREMOTEIO;
+ }
+ }
+
+ ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
+ if (ret) {
+ dev_err(&adapter->dev, "failure sending STOP\n");
+ return -EREMOTEIO;
+ }
+
+ /* read status */
+ ret = osif_usb_read(adapter, OSIFI2C_STATUS, 0, 0,
+ &priv->status, 1);
+ if (ret != 1) {
+ dev_err(&adapter->dev, "failure reading status\n");
+ return -EREMOTEIO;
+ }
+
+ if (priv->status != STATUS_ADDRESS_ACK) {
+ dev_dbg(&adapter->dev, "status = %d\n", priv->status);
+ return -EREMOTEIO;
+ }
+ }
+
+ return i;
+}
+
+static u32 osif_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm osif_algorithm = {
+ .master_xfer = osif_xfer,
+ .functionality = osif_func,
+};
+
+#define USB_OSIF_VENDOR_ID 0x1964
+#define USB_OSIF_PRODUCT_ID 0x0001
+
+static struct usb_device_id osif_table[] = {
+ { USB_DEVICE(USB_OSIF_VENDOR_ID, USB_OSIF_PRODUCT_ID) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, osif_table);
+
+static int osif_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct osif_priv *priv;
+ u16 version;
+
+ priv = devm_kzalloc(&interface->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+ priv->interface = interface;
+
+ usb_set_intfdata(interface, priv);
+
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.class = I2C_CLASS_HWMON;
+ priv->adapter.algo = &osif_algorithm;
+ priv->adapter.algo_data = priv;
+ snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+ "OSIF at bus %03d device %03d",
+ priv->usb_dev->bus->busnum, priv->usb_dev->devnum);
+
+ /*
+ * Set bus frequency. The frequency is:
+ * 120,000,000 / ( 16 + 2 * div * 4^prescale).
+ * Using dev = 52, prescale = 0 give 100KHz */
+ ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
+ NULL, 0);
+ if (ret) {
+ dev_err(&interface->dev, "failure sending bit rate");
+ usb_put_dev(priv->usb_dev);
+ return ret;
+ }
+
+ i2c_add_adapter(&(priv->adapter));
+
+ version = le16_to_cpu(priv->usb_dev->descriptor.bcdDevice);
+ dev_info(&interface->dev,
+ "version %x.%02x found at bus %03d address %03d",
+ version >> 8, version & 0xff,
+ priv->usb_dev->bus->busnum, priv->usb_dev->devnum);
+
+ return 0;
+}
+
+static void osif_disconnect(struct usb_interface *interface)
+{
+ struct osif_priv *priv = usb_get_intfdata(interface);
+
+ i2c_del_adapter(&(priv->adapter));
+ usb_set_intfdata(interface, NULL);
+ usb_put_dev(priv->usb_dev);
+}
+
+static struct usb_driver osif_driver = {
+ .name = "RobotFuzz Open Source InterFace, OSIF",
+ .probe = osif_probe,
+ .disconnect = osif_disconnect,
+ .id_table = osif_table,
+};
+
+module_usb_driver(osif_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_AUTHOR("Barry Carter <barry.carter@robotfuzz.com>");
+MODULE_DESCRIPTION("RobotFuzz OSIF driver");
+MODULE_LICENSE("GPL v2");