Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanups for the 6.4 cycle.

New device support
* bosch,bmp280
  - Add support for BMP580 - includes significant refactoring and general
    driver cleanup + support for non-volatile memory for trimming and config
    parameters.
* rohm BU27034
  - New driver for this 3 channel ambient light sensor.
  - New support library for devices where both integration time and
    amplifier gain are configurable.  In these cases a scale change
    may require changing bother underlying values. This library module
    provides code to help with this.
* st,accel
  - Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
  - Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
  - New driver for these 16 bit ADCs.
* ti,tmp117
  - Add support for older tmp116 device. Includes some general driver cleanup.

Staging driver drops
* adi,ade7854
  - Driver was a very long way from compliant with IIO infrastructure and ABI.
    If anyone wants a non staging version of this driver they are better off
    starting from scratch. Hence drop it and the associated meter.h header.

Features
* adi,ad7441r
  - Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
  - Support older register mapping from firmware designed for windows.

Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
  on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
  as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
  making them consistent and clear.

Cleanups and minor fixes:
* adi,ad5592r
  - Add GPIO names - useful for debug.
* adi,ad7441r
  - Fix current input, loop powered mode configuration setup.
* adi,adis16475
  - Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
  - Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
  - Fix wrong bits for writing config register (late fix and has
    been broken a long time so not rushed upstream)
* amlogic,meson-saradc
  - Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
  - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
    retries.
  - Add local mutex to close various races.
  - Use define U16_MAX rather than value for limit.
  - Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
  - Drop trivial dead code.
* kionix,kx022a
  - Drop unused structure element.
* linear,ltc2983
  - Reorganize bindings doc to enable unevaluatedProperties to be set
    in one place for all child nodes.
  - Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
  - Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
  - Missing static
* measurement-computing,cio-dac
  - Fix wrong part name in comments.
  - Migrate to regmap.
  - Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
  - Remove a check that can never fail.
* renesas,rcar-gyroadc
  - DT binding documentation improvements.
  - Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
  - Drop docs for a structure element that doesn't exist.
* semtech,sx9500
  - Drop ACPI_PTR() and of_match_ptr() protections that just complicate
    the code / block some firmware registration types that would otherwise
    work.
* sensiron,sps30
  - Comment formatting tidy up.
* st,sensors
  - Drop duplicate text in DT binding.
* st,stm32-adc
  - Add some missing static markings.
* ti,ads1100
  - Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
  - General code cleanup / minor refactoring for better readabilty of code.
  - Switch from boolean value to mask for adc_en2 field to avoid hard coding
    a mask that will be different in AXP192

* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
  MAINTAINERS: Add ROHM BU27034
  iio: light: ROHM BU27034 Ambient Light Sensor
  dt-bindings: iio: light: Support ROHM BU27034
  MAINTAINERS: Add IIO gain-time-scale helpers
  iio: light: Add gain-time-scale helpers
  doc: Make sysfs-bus-iio doc more exact
  iio: dac: set variable max5522_channels storage-class-specifier to static
  dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
  dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
  iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  iio: addac: stx104: Migrate to the regmap API
  iio: addac: stx104: Improve indentation in stx104_write_raw()
  iio: addac: stx104: Use define rather than hardcoded limit for write val
  iio: addac: stx104: Fix race condition when converting analog-to-digital
  iio: addac: stx104: Fix race condition for stx104_write_raw()
  dt-bindings: iio: st-sensors: Fix repeated text
  staging: iio: resolver: ads1210: fix config mode
  iio: adc: ti-ads1100: fix error code in probe()
  iio: accel: add support for IIS328DQ variant
  dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  ...

1 files changed, 39 insertions, 38 deletions

diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
index 53bf7d4899d2..75bda94dbce1 100644
--- a/drivers/iio/adc/axp20x_adc.c
+++ b/drivers/iio/adc/axp20x_adc.c
@@ -5,6 +5,7 @@
  *	Quentin Schulz <quentin.schulz@free-electrons.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -22,20 +23,20 @@
 #include <linux/mfd/axp20x.h>
 
 #define AXP20X_ADC_EN1_MASK			GENMASK(7, 0)
-
 #define AXP20X_ADC_EN2_MASK			(GENMASK(3, 2) | BIT(7))
+
 #define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
 
 #define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
 #define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
-#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x)	((x) & BIT(0))
-#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x)	(((x) & BIT(0)) << 1)
 
 #define AXP20X_ADC_RATE_MASK			GENMASK(7, 6)
-#define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
-#define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
 #define AXP20X_ADC_RATE_HZ(x)			((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
+
 #define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
+
+#define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
+#define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
 #define AXP813_TS_GPIO0_ADC_RATE_HZ(x)		AXP20X_ADC_RATE_HZ(x)
 #define AXP813_V_I_ADC_RATE_HZ(x)		((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
 #define AXP813_ADC_RATE_HZ(x)			(AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
@@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan, int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
-	int size = 12;
+	int ret, size;
 
 	/*
 	 * N.B.:  Unlike the Chinese datasheets tell, the charging current is
@@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
 	else
 		size = 12;
 
-	*val = axp20x_read_variable_width(info->regmap, chan->address, size);
-	if (*val < 0)
-		return *val;
+	ret = axp20x_read_variable_width(info->regmap, chan->address, size);
+	if (ret < 0)
+		return ret;
 
+	*val = ret;
 	return IIO_VAL_INT;
 }
 
@@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan, int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
+	int ret;
 
-	*val = axp20x_read_variable_width(info->regmap, chan->address, 12);
-	if (*val < 0)
-		return *val;
+	ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
+	if (ret < 0)
+		return ret;
 
+	*val = ret;
 	return IIO_VAL_INT;
 }
 
@@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan, int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
+	int ret;
 
-	*val = axp20x_read_variable_width(info->regmap, chan->address, 12);
-	if (*val < 0)
-		return *val;
+	ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
+	if (ret < 0)
+		return ret;
 
+	*val = ret;
 	return IIO_VAL_INT;
 }
 
@@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
 				     int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
+	unsigned int regval;
 	int ret;
 
-	ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
+	ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, &regval);
 	if (ret < 0)
 		return ret;
 
 	switch (channel) {
 	case AXP20X_GPIO0_V:
-		*val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
+		regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO0, regval);
 		break;
 
 	case AXP20X_GPIO1_V:
-		*val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
+		regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO1, regval);
 		break;
 
 	default:
 		return -EINVAL;
 	}
 
-	*val = *val ? 700000 : 0;
-
+	*val = regval ? 700000 : 0;
 	return IIO_VAL_INT;
 }
 
@@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
-	unsigned int reg, regval;
+	unsigned int regmask, regval;
 
 	/*
 	 * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
@@ -560,25 +566,22 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
 	if (val != 0 && val != 700000)
 		return -EINVAL;
 
-	val = val ? 1 : 0;
-
 	switch (chan->channel) {
 	case AXP20X_GPIO0_V:
-		reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
-		regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val);
+		regmask = AXP20X_GPIO10_IN_RANGE_GPIO0;
+		regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, !!val);
 		break;
 
 	case AXP20X_GPIO1_V:
-		reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
-		regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val);
+		regmask = AXP20X_GPIO10_IN_RANGE_GPIO1;
+		regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, !!val);
 		break;
 
 	default:
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
-				  regval);
+	return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval);
 }
 
 static const struct iio_info axp20x_adc_iio_info = {
@@ -620,9 +623,9 @@ struct axp_data {
 	int				num_channels;
 	struct iio_chan_spec const	*channels;
 	unsigned long			adc_en1_mask;
+	unsigned long			adc_en2_mask;
 	int				(*adc_rate)(struct axp20x_adc_iio *info,
 						    int rate);
-	bool				adc_en2;
 	struct iio_map			*maps;
 };
 
@@ -631,8 +634,8 @@ static const struct axp_data axp20x_data = {
 	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
 	.channels = axp20x_adc_channels,
 	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
+	.adc_en2_mask = AXP20X_ADC_EN2_MASK,
 	.adc_rate = axp20x_adc_rate,
-	.adc_en2 = true,
 	.maps = axp20x_maps,
 };
 
@@ -642,7 +645,6 @@ static const struct axp_data axp22x_data = {
 	.channels = axp22x_adc_channels,
 	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
 	.adc_rate = axp22x_adc_rate,
-	.adc_en2 = false,
 	.maps = axp22x_maps,
 };
 
@@ -652,7 +654,6 @@ static const struct axp_data axp813_data = {
 	.channels = axp813_adc_channels,
 	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
 	.adc_rate = axp813_adc_rate,
-	.adc_en2 = false,
 	.maps = axp22x_maps,
 };
 
@@ -710,10 +711,10 @@ static int axp20x_probe(struct platform_device *pdev)
 	/* Enable the ADCs on IP */
 	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
 
-	if (info->data->adc_en2)
-		/* Enable GPIO0/1 and internal temperature ADCs */
+	if (info->data->adc_en2_mask)
 		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
-				   AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
+				   info->data->adc_en2_mask,
+				   info->data->adc_en2_mask);
 
 	/* Configure ADCs rate */
 	info->data->adc_rate(info, 100);
@@ -738,7 +739,7 @@ fail_register:
 fail_map:
 	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
 
-	if (info->data->adc_en2)
+	if (info->data->adc_en2_mask)
 		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
 
 	return ret;
@@ -754,7 +755,7 @@ static int axp20x_remove(struct platform_device *pdev)
 
 	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
 
-	if (info->data->adc_en2)
+	if (info->data->adc_en2_mask)
 		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
 
 	return 0;