iio: imu: st_lsm6dsx: add support to LSM6DSO16IS

Add support to STM LSM6DSO16IS (accelerometer and gyroscope) Mems sensor.

Datasheet: https://www.st.com/resource/en/datasheet/lsm6dso16is.pdf
Tested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/df6a9d4653cd69f7204190f8b6a9b618fd48bd23.1668605631.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

1 files changed, 127 insertions, 1 deletions

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b680682f9833..57a79bf35bba 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -27,7 +27,7 @@
  *   - FIFO size: 4KB
  *
  * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
- *   LSM6DSTX:
+ *   LSM6DSTX/LSM6DSO16IS:
  *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
  *     833
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
@@ -1375,6 +1375,132 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.wakeup_src_x_mask = BIT(2),
 		},
 	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DSO16IS_ID,
+				.name = ST_LSM6DSO16IS_DEV_NAME,
+				.wai = 0x22,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.shub_settings = {
+			.page_mux = {
+				.addr = 0x01,
+				.mask = BIT(6),
+			},
+			.master_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(2),
+			},
+			.pullup_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(3),
+			},
+			.aux_sens = {
+				.addr = 0x14,
+				.mask = GENMASK(1, 0),
+			},
+			.wr_once = {
+				.addr = 0x14,
+				.mask = BIT(6),
+			},
+			.num_ext_dev = 3,
+			.shub_out = {
+				.sec_page = true,
+				.addr = 0x02,
+			},
+			.slv0_addr = 0x15,
+			.dw_slv0_addr = 0x21,
+		},
+	},
 };
 
 int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)