Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanups for the 6.4 cycle.

New device support
* bosch,bmp280
  - Add support for BMP580 - includes significant refactoring and general
    driver cleanup + support for non-volatile memory for trimming and config
    parameters.
* rohm BU27034
  - New driver for this 3 channel ambient light sensor.
  - New support library for devices where both integration time and
    amplifier gain are configurable.  In these cases a scale change
    may require changing bother underlying values. This library module
    provides code to help with this.
* st,accel
  - Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
  - Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
  - New driver for these 16 bit ADCs.
* ti,tmp117
  - Add support for older tmp116 device. Includes some general driver cleanup.

Staging driver drops
* adi,ade7854
  - Driver was a very long way from compliant with IIO infrastructure and ABI.
    If anyone wants a non staging version of this driver they are better off
    starting from scratch. Hence drop it and the associated meter.h header.

Features
* adi,ad7441r
  - Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
  - Support older register mapping from firmware designed for windows.

Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
  on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
  as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
  making them consistent and clear.

Cleanups and minor fixes:
* adi,ad5592r
  - Add GPIO names - useful for debug.
* adi,ad7441r
  - Fix current input, loop powered mode configuration setup.
* adi,adis16475
  - Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
  - Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
  - Fix wrong bits for writing config register (late fix and has
    been broken a long time so not rushed upstream)
* amlogic,meson-saradc
  - Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
  - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
    retries.
  - Add local mutex to close various races.
  - Use define U16_MAX rather than value for limit.
  - Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
  - Drop trivial dead code.
* kionix,kx022a
  - Drop unused structure element.
* linear,ltc2983
  - Reorganize bindings doc to enable unevaluatedProperties to be set
    in one place for all child nodes.
  - Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
  - Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
  - Missing static
* measurement-computing,cio-dac
  - Fix wrong part name in comments.
  - Migrate to regmap.
  - Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
  - Remove a check that can never fail.
* renesas,rcar-gyroadc
  - DT binding documentation improvements.
  - Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
  - Drop docs for a structure element that doesn't exist.
* semtech,sx9500
  - Drop ACPI_PTR() and of_match_ptr() protections that just complicate
    the code / block some firmware registration types that would otherwise
    work.
* sensiron,sps30
  - Comment formatting tidy up.
* st,sensors
  - Drop duplicate text in DT binding.
* st,stm32-adc
  - Add some missing static markings.
* ti,ads1100
  - Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
  - General code cleanup / minor refactoring for better readabilty of code.
  - Switch from boolean value to mask for adc_en2 field to avoid hard coding
    a mask that will be different in AXP192

* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
  MAINTAINERS: Add ROHM BU27034
  iio: light: ROHM BU27034 Ambient Light Sensor
  dt-bindings: iio: light: Support ROHM BU27034
  MAINTAINERS: Add IIO gain-time-scale helpers
  iio: light: Add gain-time-scale helpers
  doc: Make sysfs-bus-iio doc more exact
  iio: dac: set variable max5522_channels storage-class-specifier to static
  dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
  dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
  iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  iio: addac: stx104: Migrate to the regmap API
  iio: addac: stx104: Improve indentation in stx104_write_raw()
  iio: addac: stx104: Use define rather than hardcoded limit for write val
  iio: addac: stx104: Fix race condition when converting analog-to-digital
  iio: addac: stx104: Fix race condition for stx104_write_raw()
  dt-bindings: iio: st-sensors: Fix repeated text
  staging: iio: resolver: ads1210: fix config mode
  iio: adc: ti-ads1100: fix error code in probe()
  iio: accel: add support for IIS328DQ variant
  dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  ...

1 files changed, 18 insertions, 27 deletions

diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 14eab086d24a..567b945e6427 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -8,25 +8,14 @@
 static int bmp280_i2c_probe(struct i2c_client *client)
 {
 	struct regmap *regmap;
-	const struct regmap_config *regmap_config;
+	const struct bmp280_chip_info *chip_info;
 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 
-	switch (id->driver_data) {
-	case BMP180_CHIP_ID:
-		regmap_config = &bmp180_regmap_config;
-		break;
-	case BMP280_CHIP_ID:
-	case BME280_CHIP_ID:
-		regmap_config = &bmp280_regmap_config;
-		break;
-	case BMP380_CHIP_ID:
-		regmap_config = &bmp380_regmap_config;
-		break;
-	default:
-		return -EINVAL;
-	}
+	chip_info = device_get_match_data(&client->dev);
+	if (!chip_info)
+		chip_info = (const struct bmp280_chip_info *) id->driver_data;
 
-	regmap = devm_regmap_init_i2c(client, regmap_config);
+	regmap = devm_regmap_init_i2c(client, chip_info->regmap_config);
 	if (IS_ERR(regmap)) {
 		dev_err(&client->dev, "failed to allocate register map\n");
 		return PTR_ERR(regmap);
@@ -34,27 +23,29 @@ static int bmp280_i2c_probe(struct i2c_client *client)
 
 	return bmp280_common_probe(&client->dev,
 				   regmap,
-				   id->driver_data,
+				   chip_info,
 				   id->name,
 				   client->irq);
 }
 
 static const struct of_device_id bmp280_of_i2c_match[] = {
-	{ .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID },
-	{ .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
-	{ .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
-	{ .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
-	{ .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID },
+	{ .compatible = "bosch,bmp085", .data = &bmp180_chip_info },
+	{ .compatible = "bosch,bmp180", .data = &bmp180_chip_info },
+	{ .compatible = "bosch,bmp280", .data = &bmp280_chip_info },
+	{ .compatible = "bosch,bme280", .data = &bme280_chip_info },
+	{ .compatible = "bosch,bmp380", .data = &bmp380_chip_info },
+	{ .compatible = "bosch,bmp580", .data = &bmp580_chip_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
 
 static const struct i2c_device_id bmp280_i2c_id[] = {
-	{"bmp085", BMP180_CHIP_ID },
-	{"bmp180", BMP180_CHIP_ID },
-	{"bmp280", BMP280_CHIP_ID },
-	{"bme280", BME280_CHIP_ID },
-	{"bmp380", BMP380_CHIP_ID },
+	{"bmp085", (kernel_ulong_t)&bmp180_chip_info },
+	{"bmp180", (kernel_ulong_t)&bmp180_chip_info },
+	{"bmp280", (kernel_ulong_t)&bmp280_chip_info },
+	{"bme280", (kernel_ulong_t)&bme280_chip_info },
+	{"bmp380", (kernel_ulong_t)&bmp380_chip_info },
+	{"bmp580", (kernel_ulong_t)&bmp580_chip_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id);