Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanups for the 6.4 cycle.

New device support
* bosch,bmp280
  - Add support for BMP580 - includes significant refactoring and general
    driver cleanup + support for non-volatile memory for trimming and config
    parameters.
* rohm BU27034
  - New driver for this 3 channel ambient light sensor.
  - New support library for devices where both integration time and
    amplifier gain are configurable.  In these cases a scale change
    may require changing bother underlying values. This library module
    provides code to help with this.
* st,accel
  - Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
  - Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
  - New driver for these 16 bit ADCs.
* ti,tmp117
  - Add support for older tmp116 device. Includes some general driver cleanup.

Staging driver drops
* adi,ade7854
  - Driver was a very long way from compliant with IIO infrastructure and ABI.
    If anyone wants a non staging version of this driver they are better off
    starting from scratch. Hence drop it and the associated meter.h header.

Features
* adi,ad7441r
  - Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
  - Support older register mapping from firmware designed for windows.

Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
  on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
  as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
  making them consistent and clear.

Cleanups and minor fixes:
* adi,ad5592r
  - Add GPIO names - useful for debug.
* adi,ad7441r
  - Fix current input, loop powered mode configuration setup.
* adi,adis16475
  - Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
  - Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
  - Fix wrong bits for writing config register (late fix and has
    been broken a long time so not rushed upstream)
* amlogic,meson-saradc
  - Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
  - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
    retries.
  - Add local mutex to close various races.
  - Use define U16_MAX rather than value for limit.
  - Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
  - Drop trivial dead code.
* kionix,kx022a
  - Drop unused structure element.
* linear,ltc2983
  - Reorganize bindings doc to enable unevaluatedProperties to be set
    in one place for all child nodes.
  - Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
  - Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
  - Missing static
* measurement-computing,cio-dac
  - Fix wrong part name in comments.
  - Migrate to regmap.
  - Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
  - Remove a check that can never fail.
* renesas,rcar-gyroadc
  - DT binding documentation improvements.
  - Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
  - Drop docs for a structure element that doesn't exist.
* semtech,sx9500
  - Drop ACPI_PTR() and of_match_ptr() protections that just complicate
    the code / block some firmware registration types that would otherwise
    work.
* sensiron,sps30
  - Comment formatting tidy up.
* st,sensors
  - Drop duplicate text in DT binding.
* st,stm32-adc
  - Add some missing static markings.
* ti,ads1100
  - Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
  - General code cleanup / minor refactoring for better readabilty of code.
  - Switch from boolean value to mask for adc_en2 field to avoid hard coding
    a mask that will be different in AXP192

* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
  MAINTAINERS: Add ROHM BU27034
  iio: light: ROHM BU27034 Ambient Light Sensor
  dt-bindings: iio: light: Support ROHM BU27034
  MAINTAINERS: Add IIO gain-time-scale helpers
  iio: light: Add gain-time-scale helpers
  doc: Make sysfs-bus-iio doc more exact
  iio: dac: set variable max5522_channels storage-class-specifier to static
  dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
  dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
  iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  iio: addac: stx104: Migrate to the regmap API
  iio: addac: stx104: Improve indentation in stx104_write_raw()
  iio: addac: stx104: Use define rather than hardcoded limit for write val
  iio: addac: stx104: Fix race condition when converting analog-to-digital
  iio: addac: stx104: Fix race condition for stx104_write_raw()
  dt-bindings: iio: st-sensors: Fix repeated text
  staging: iio: resolver: ads1210: fix config mode
  iio: adc: ti-ads1100: fix error code in probe()
  iio: accel: add support for IIS328DQ variant
  dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  ...

1 files changed, 272 insertions, 1 deletions

diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index c791325c7416..5c0563ce7572 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -1,7 +1,114 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/bitops.h>
 #include <linux/device.h>
+#include <linux/iio/iio.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+
+/* BMP580 specific registers */
+#define BMP580_REG_CMD			0x7E
+#define BMP580_REG_EFF_OSR		0x38
+#define BMP580_REG_ODR_CONFIG		0x37
+#define BMP580_REG_OSR_CONFIG		0x36
+#define BMP580_REG_IF_CONFIG		0x13
+#define BMP580_REG_REV_ID		0x02
+#define BMP580_REG_CHIP_ID		0x01
+/* OOR allows to configure a pressure alarm */
+#define BMP580_REG_OOR_CONFIG		0x35
+#define BMP580_REG_OOR_RANGE		0x34
+#define BMP580_REG_OOR_THR_MSB		0x33
+#define BMP580_REG_OOR_THR_LSB		0x32
+/* DSP registers (IIR filters) */
+#define BMP580_REG_DSP_IIR		0x31
+#define BMP580_REG_DSP_CONFIG		0x30
+/* NVM access registers */
+#define BMP580_REG_NVM_DATA_MSB		0x2D
+#define BMP580_REG_NVM_DATA_LSB		0x2C
+#define BMP580_REG_NVM_ADDR		0x2B
+/* Status registers */
+#define BMP580_REG_STATUS		0x28
+#define BMP580_REG_INT_STATUS		0x27
+#define BMP580_REG_CHIP_STATUS		0x11
+/* Data registers */
+#define BMP580_REG_FIFO_DATA		0x29
+#define BMP580_REG_PRESS_MSB		0x22
+#define BMP580_REG_PRESS_LSB		0x21
+#define BMP580_REG_PRESS_XLSB		0x20
+#define BMP580_REG_TEMP_MSB		0x1F
+#define BMP580_REG_TEMP_LSB		0x1E
+#define BMP580_REG_TEMP_XLSB		0x1D
+/* FIFO config registers */
+#define BMP580_REG_FIFO_SEL		0x18
+#define BMP580_REG_FIFO_COUNT		0x17
+#define BMP580_REG_FIFO_CONFIG		0x16
+/* Interruptions config registers */
+#define BMP580_REG_INT_SOURCE		0x15
+#define BMP580_REG_INT_CONFIG		0x14
+
+#define BMP580_CMD_NOOP			0x00
+#define BMP580_CMD_EXTMODE_SEQ_0	0x73
+#define BMP580_CMD_EXTMODE_SEQ_1	0xB4
+#define BMP580_CMD_EXTMODE_SEQ_2	0x69
+#define BMP580_CMD_NVM_OP_SEQ_0		0x5D
+#define BMP580_CMD_NVM_READ_SEQ_1	0xA5
+#define BMP580_CMD_NVM_WRITE_SEQ_1	0xA0
+#define BMP580_CMD_SOFT_RESET		0xB6
+
+#define BMP580_INT_STATUS_POR_MASK	BIT(4)
+
+#define BMP580_STATUS_CORE_RDY_MASK	BIT(0)
+#define BMP580_STATUS_NVM_RDY_MASK	BIT(1)
+#define BMP580_STATUS_NVM_ERR_MASK	BIT(2)
+#define BMP580_STATUS_NVM_CMD_ERR_MASK	BIT(3)
+
+#define BMP580_OSR_PRESS_MASK		GENMASK(5, 3)
+#define BMP580_OSR_TEMP_MASK		GENMASK(2, 0)
+#define BMP580_OSR_PRESS_EN		BIT(6)
+#define BMP580_EFF_OSR_PRESS_MASK	GENMASK(5, 3)
+#define BMP580_EFF_OSR_TEMP_MASK	GENMASK(2, 0)
+#define BMP580_EFF_OSR_VALID_ODR	BIT(7)
+
+#define BMP580_ODR_MASK			GENMASK(6, 2)
+#define BMP580_MODE_MASK		GENMASK(1, 0)
+#define BMP580_MODE_SLEEP		0
+#define BMP580_MODE_NORMAL		1
+#define BMP580_MODE_FORCED		2
+#define BMP580_MODE_CONTINOUS		3
+#define BMP580_ODR_DEEPSLEEP_DIS	BIT(7)
+
+#define BMP580_DSP_COMP_MASK		GENMASK(1, 0)
+#define BMP580_DSP_COMP_DIS		0
+#define BMP580_DSP_TEMP_COMP_EN		1
+/*
+ * In section 7.27 of datasheet, modes 2 and 3 are technically the same.
+ * Pressure compensation means also enabling temperature compensation
+ */
+#define BMP580_DSP_PRESS_COMP_EN	2
+#define BMP580_DSP_PRESS_TEMP_COMP_EN	3
+#define BMP580_DSP_IIR_FORCED_FLUSH	BIT(2)
+#define BMP580_DSP_SHDW_IIR_TEMP_EN	BIT(3)
+#define BMP580_DSP_FIFO_IIR_TEMP_EN	BIT(4)
+#define BMP580_DSP_SHDW_IIR_PRESS_EN	BIT(5)
+#define BMP580_DSP_FIFO_IIR_PRESS_EN	BIT(6)
+#define BMP580_DSP_OOR_IIR_PRESS_EN	BIT(7)
+
+#define BMP580_DSP_IIR_PRESS_MASK	GENMASK(5, 3)
+#define BMP580_DSP_IIR_TEMP_MASK	GENMASK(2, 0)
+#define BMP580_FILTER_OFF		0
+#define BMP580_FILTER_1X		1
+#define BMP580_FILTER_3X		2
+#define BMP580_FILTER_7X		3
+#define BMP580_FILTER_15X		4
+#define BMP580_FILTER_31X		5
+#define BMP580_FILTER_63X		6
+#define BMP580_FILTER_127X		7
+
+#define BMP580_NVM_ROW_ADDR_MASK	GENMASK(5, 0)
+#define BMP580_NVM_PROG_EN		BIT(6)
+
+#define BMP580_TEMP_SKIPPED		0x7f7f7f
+#define BMP580_PRESS_SKIPPED		0x7f7f7f
 
 /* BMP380 specific registers */
 #define BMP380_REG_CMD			0x7E
@@ -181,6 +288,8 @@
 #define BMP280_REG_ID			0xD0
 
 #define BMP380_CHIP_ID			0x50
+#define BMP580_CHIP_ID			0x50
+#define BMP580_CHIP_ID_ALT		0x51
 #define BMP180_CHIP_ID			0x55
 #define BMP280_CHIP_ID			0x58
 #define BME280_CHIP_ID			0x60
@@ -191,15 +300,177 @@
 #define BMP280_PRESS_SKIPPED		0x80000
 #define BMP280_HUMIDITY_SKIPPED		0x8000
 
+/* Core exported structs */
+
+static const char *const bmp280_supply_names[] = {
+	"vddd", "vdda"
+};
+
+#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+
+struct bmp180_calib {
+	s16 AC1;
+	s16 AC2;
+	s16 AC3;
+	u16 AC4;
+	u16 AC5;
+	u16 AC6;
+	s16 B1;
+	s16 B2;
+	s16 MB;
+	s16 MC;
+	s16 MD;
+};
+
+/* See datasheet Section 4.2.2. */
+struct bmp280_calib {
+	u16 T1;
+	s16 T2;
+	s16 T3;
+	u16 P1;
+	s16 P2;
+	s16 P3;
+	s16 P4;
+	s16 P5;
+	s16 P6;
+	s16 P7;
+	s16 P8;
+	s16 P9;
+	u8  H1;
+	s16 H2;
+	u8  H3;
+	s16 H4;
+	s16 H5;
+	s8  H6;
+};
+
+/* See datasheet Section 3.11.1. */
+struct bmp380_calib {
+	u16 T1;
+	u16 T2;
+	s8  T3;
+	s16 P1;
+	s16 P2;
+	s8  P3;
+	s8  P4;
+	u16 P5;
+	u16 P6;
+	s8  P7;
+	s8  P8;
+	s16 P9;
+	s8  P10;
+	s8  P11;
+};
+
+struct bmp280_data {
+	struct device *dev;
+	struct mutex lock;
+	struct regmap *regmap;
+	struct completion done;
+	bool use_eoc;
+	const struct bmp280_chip_info *chip_info;
+	union {
+		struct bmp180_calib bmp180;
+		struct bmp280_calib bmp280;
+		struct bmp380_calib bmp380;
+	} calib;
+	struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
+	unsigned int start_up_time; /* in microseconds */
+
+	/* log of base 2 of oversampling rate */
+	u8 oversampling_press;
+	u8 oversampling_temp;
+	u8 oversampling_humid;
+	u8 iir_filter_coeff;
+
+	/*
+	 * BMP380 devices introduce sampling frequency configuration. See
+	 * datasheet sections 3.3.3. and 4.3.19 for more details.
+	 *
+	 * BMx280 devices allowed indirect configuration of sampling frequency
+	 * changing the t_standby duration between measurements, as detailed on
+	 * section 3.6.3 of the datasheet.
+	 */
+	int sampling_freq;
+
+	/*
+	 * Carryover value from temperature conversion, used in pressure
+	 * calculation.
+	 */
+	s32 t_fine;
+
+	/*
+	 * DMA (thus cache coherency maintenance) may require the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	union {
+		/* Sensor data buffer */
+		u8 buf[3];
+		/* Calibration data buffers */
+		__le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
+		__be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
+		u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT];
+		/* Miscellaneous, endianess-aware data buffers */
+		__le16 le16;
+		__be16 be16;
+	} __aligned(IIO_DMA_MINALIGN);
+};
+
+struct bmp280_chip_info {
+	unsigned int id_reg;
+	const unsigned int chip_id;
+
+	const struct regmap_config *regmap_config;
+
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	unsigned int start_up_time;
+
+	const int *oversampling_temp_avail;
+	int num_oversampling_temp_avail;
+	int oversampling_temp_default;
+
+	const int *oversampling_press_avail;
+	int num_oversampling_press_avail;
+	int oversampling_press_default;
+
+	const int *oversampling_humid_avail;
+	int num_oversampling_humid_avail;
+	int oversampling_humid_default;
+
+	const int *iir_filter_coeffs_avail;
+	int num_iir_filter_coeffs_avail;
+	int iir_filter_coeff_default;
+
+	const int (*sampling_freq_avail)[2];
+	int num_sampling_freq_avail;
+	int sampling_freq_default;
+
+	int (*chip_config)(struct bmp280_data *);
+	int (*read_temp)(struct bmp280_data *, int *, int *);
+	int (*read_press)(struct bmp280_data *, int *, int *);
+	int (*read_humid)(struct bmp280_data *, int *, int *);
+	int (*read_calib)(struct bmp280_data *);
+	int (*preinit)(struct bmp280_data *);
+};
+
+/* Chip infos for each variant */
+extern const struct bmp280_chip_info bmp180_chip_info;
+extern const struct bmp280_chip_info bmp280_chip_info;
+extern const struct bmp280_chip_info bme280_chip_info;
+extern const struct bmp280_chip_info bmp380_chip_info;
+extern const struct bmp280_chip_info bmp580_chip_info;
+
 /* Regmap configurations */
 extern const struct regmap_config bmp180_regmap_config;
 extern const struct regmap_config bmp280_regmap_config;
 extern const struct regmap_config bmp380_regmap_config;
+extern const struct regmap_config bmp580_regmap_config;
 
 /* Probe called from different transports */
 int bmp280_common_probe(struct device *dev,
 			struct regmap *regmap,
-			unsigned int chip,
+			const struct bmp280_chip_info *,
 			const char *name,
 			int irq);