Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2022-10-08 08:56:37 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2022-10-08 08:56:37 -0700
commit: a09476668e3016ea4a7b0a7ebd02f44e0546c12c (patch)
tree: 0a2e435d40b1785bc3df0c455fbf858adc28d36c /drivers/iio
parent: e8bc52cb8df80c31c73c726ab58ea9746e9ff734 (diff)
parent: 7cd04013fbf3e6dcb67ca6b59aa813269a2ad9ce (diff)
download: linux-stable-a09476668e3016ea4a7b0a7ebd02f44e0546c12c.tar.gz
linux-stable-a09476668e3016ea4a7b0a7ebd02f44e0546c12c.tar.bz2
linux-stable-a09476668e3016ea4a7b0a7ebd02f44e0546c12c.zip
110 files changed, 10350 insertions, 1339 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 35798712f811..ffac66db7ac9 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -541,6 +541,19 @@ config MMA9553
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma9553.
 
+config MSA311
+	tristate "MEMSensing Digital 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for the MEMSensing MSA311
+	  accelerometer driver.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called msa311.
+
 config MXC4005
 	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
 	depends on I2C
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 4d8792668838..5e45b5fa5ab5 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -58,6 +58,8 @@ obj-$(CONFIG_MMA9551_CORE)	+= mma9551_core.o
 obj-$(CONFIG_MMA9551)		+= mma9551.o
 obj-$(CONFIG_MMA9553)		+= mma9553.o
 
+obj-$(CONFIG_MSA311)		+= msa311.o
+
 obj-$(CONFIG_MXC4005)		+= mxc4005.o
 obj-$(CONFIG_MXC6255)		+= mxc6255.o
 
diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
index 4415f2fc07e1..72f624af4686 100644
--- a/drivers/iio/accel/adxl313.h
+++ b/drivers/iio/accel/adxl313.h
@@ -8,6 +8,8 @@
 #ifndef _ADXL313_H_
 #define _ADXL313_H_
 
+#include <linux/iio/iio.h>
+
 /* ADXL313 register definitions */
 #define ADXL313_REG_DEVID0		0x00
 #define ADXL313_REG_DEVID1		0x01
@@ -26,6 +28,7 @@
 #define ADXL313_REG_FIFO_STATUS		0x39
 
 #define ADXL313_DEVID0			0xAD
+#define ADXL313_DEVID0_ADXL312_314	0xE5
 #define ADXL313_DEVID1			0x1D
 #define ADXL313_PARTID			0xCB
 #define ADXL313_SOFT_RESET		0x52
@@ -37,18 +40,46 @@
 #define ADXL313_MEASUREMENT_MODE	BIT(3)
 
 #define ADXL313_RANGE_MSK		GENMASK(1, 0)
-#define ADXL313_RANGE_4G		3
+#define ADXL313_RANGE_MAX		3
 
 #define ADXL313_FULL_RES		BIT(3)
 #define ADXL313_SPI_3WIRE		BIT(6)
 #define ADXL313_I2C_DISABLE		BIT(6)
 
+extern const struct regmap_access_table adxl312_readable_regs_table;
 extern const struct regmap_access_table adxl313_readable_regs_table;
+extern const struct regmap_access_table adxl314_readable_regs_table;
 
+extern const struct regmap_access_table adxl312_writable_regs_table;
 extern const struct regmap_access_table adxl313_writable_regs_table;
+extern const struct regmap_access_table adxl314_writable_regs_table;
+
+enum adxl313_device_type {
+	ADXL312,
+	ADXL313,
+	ADXL314,
+};
+
+struct adxl313_data {
+	struct regmap	*regmap;
+	const struct adxl313_chip_info *chip_info;
+	struct mutex	lock; /* lock to protect transf_buf */
+	__le16		transf_buf __aligned(IIO_DMA_MINALIGN);
+};
+
+struct adxl313_chip_info {
+	const char			*name;
+	enum adxl313_device_type	type;
+	int				scale_factor;
+	bool				variable_range;
+	bool				soft_reset;
+	int (*check_id)(struct device *dev, struct adxl313_data *data);
+};
+
+extern const struct adxl313_chip_info adxl31x_chip_info[];
 
 int adxl313_core_probe(struct device *dev,
 		       struct regmap *regmap,
-		       const char *name,
+		       const struct adxl313_chip_info *chip_info,
 		       int (*setup)(struct device *, struct regmap *));
 #endif /* _ADXL313_H_ */
diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
index afeef779e1d0..4de0a41bd679 100644
--- a/drivers/iio/accel/adxl313_core.c
+++ b/drivers/iio/accel/adxl313_core.c
@@ -8,12 +8,18 @@
  */
 
 #include <linux/bitfield.h>
-#include <linux/iio/iio.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
 
 #include "adxl313.h"
 
+static const struct regmap_range adxl312_readable_reg_range[] = {
+	regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_DEVID0),
+	regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
+	regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
+	regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS),
+};
+
 static const struct regmap_range adxl313_readable_reg_range[] = {
 	regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID),
 	regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
@@ -22,12 +28,109 @@ static const struct regmap_range adxl313_readable_reg_range[] = {
 	regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS),
 };
 
+const struct regmap_access_table adxl312_readable_regs_table = {
+	.yes_ranges = adxl312_readable_reg_range,
+	.n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl312_readable_regs_table, IIO_ADXL313);
+
 const struct regmap_access_table adxl313_readable_regs_table = {
 	.yes_ranges = adxl313_readable_reg_range,
 	.n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range),
 };
 EXPORT_SYMBOL_NS_GPL(adxl313_readable_regs_table, IIO_ADXL313);
 
+const struct regmap_access_table adxl314_readable_regs_table = {
+	.yes_ranges = adxl312_readable_reg_range,
+	.n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl314_readable_regs_table, IIO_ADXL313);
+
+static int adxl312_check_id(struct device *dev,
+			    struct adxl313_data *data)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, &regval);
+	if (ret)
+		return ret;
+
+	if (regval != ADXL313_DEVID0_ADXL312_314)
+		dev_warn(dev, "Invalid manufacturer ID: %#02x\n", regval);
+
+	return 0;
+}
+
+static int adxl313_check_id(struct device *dev,
+			    struct adxl313_data *data)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, &regval);
+	if (ret)
+		return ret;
+
+	if (regval != ADXL313_DEVID0)
+		dev_warn(dev, "Invalid manufacturer ID: 0x%02x\n", regval);
+
+	/* Check DEVID1 and PARTID */
+	if (regval == ADXL313_DEVID0) {
+		ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, &regval);
+		if (ret)
+			return ret;
+
+		if (regval != ADXL313_DEVID1)
+			dev_warn(dev, "Invalid mems ID: 0x%02x\n", regval);
+
+		ret = regmap_read(data->regmap, ADXL313_REG_PARTID, &regval);
+		if (ret)
+			return ret;
+
+		if (regval != ADXL313_PARTID)
+			dev_warn(dev, "Invalid device ID: 0x%02x\n", regval);
+	}
+
+	return 0;
+}
+
+const struct adxl313_chip_info adxl31x_chip_info[] = {
+	[ADXL312] = {
+		.name = "adxl312",
+		.type = ADXL312,
+		.scale_factor = 28425072,
+		.variable_range = true,
+		.soft_reset = false,
+		.check_id = &adxl312_check_id,
+	},
+	[ADXL313] = {
+		.name = "adxl313",
+		.type = ADXL313,
+		.scale_factor = 9576806,
+		.variable_range = true,
+		.soft_reset = true,
+		.check_id = &adxl313_check_id,
+	},
+	[ADXL314] = {
+		.name = "adxl314",
+		.type = ADXL314,
+		.scale_factor = 478858719,
+		.variable_range = false,
+		.soft_reset = false,
+		.check_id = &adxl312_check_id,
+	},
+};
+EXPORT_SYMBOL_NS_GPL(adxl31x_chip_info, IIO_ADXL313);
+
+static const struct regmap_range adxl312_writable_reg_range[] = {
+	regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
+	regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
+	regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP),
+	regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT),
+	regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL),
+};
+
 static const struct regmap_range adxl313_writable_reg_range[] = {
 	regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
 	regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
@@ -37,17 +140,23 @@ static const struct regmap_range adxl313_writable_reg_range[] = {
 	regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL),
 };
 
+const struct regmap_access_table adxl312_writable_regs_table = {
+	.yes_ranges = adxl312_writable_reg_range,
+	.n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl312_writable_regs_table, IIO_ADXL313);
+
 const struct regmap_access_table adxl313_writable_regs_table = {
 	.yes_ranges = adxl313_writable_reg_range,
 	.n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range),
 };
 EXPORT_SYMBOL_NS_GPL(adxl313_writable_regs_table, IIO_ADXL313);
 
-struct adxl313_data {
-	struct regmap	*regmap;
-	struct mutex	lock; /* lock to protect transf_buf */
-	__le16		transf_buf __aligned(IIO_DMA_MINALIGN);
+const struct regmap_access_table adxl314_writable_regs_table = {
+	.yes_ranges = adxl312_writable_reg_range,
+	.n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range),
 };
+EXPORT_SYMBOL_NS_GPL(adxl314_writable_regs_table, IIO_ADXL313);
 
 static const int adxl313_odr_freqs[][2] = {
 	[0] = { 6, 250000 },
@@ -156,12 +265,10 @@ static int adxl313_read_raw(struct iio_dev *indio_dev,
 		*val = sign_extend32(ret, chan->scan_type.realbits - 1);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		/*
-		 * Scale for any g range is given in datasheet as
-		 * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2
-		 */
 		*val = 0;
-		*val2 = 9576806;
+
+		*val2 = data->chip_info->scale_factor;
+
 		return IIO_VAL_INT_PLUS_NANO;
 	case IIO_CHAN_INFO_CALIBBIAS:
 		ret = regmap_read(data->regmap,
@@ -170,7 +277,7 @@ static int adxl313_read_raw(struct iio_dev *indio_dev,
 			return ret;
 
 		/*
-		 * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
+		 * 8-bit resolution at minimum range, that is 4x accel data scale
 		 * factor at full resolution
 		 */
 		*val = sign_extend32(regval, 7) * 4;
@@ -198,7 +305,7 @@ static int adxl313_write_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
 		/*
-		 * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
+		 * 8-bit resolution at minimum range, that is 4x accel data scale
 		 * factor at full resolution
 		 */
 		if (clamp_val(val, -128 * 4, 127 * 4) != val)
@@ -223,14 +330,18 @@ static const struct iio_info adxl313_info = {
 static int adxl313_setup(struct device *dev, struct adxl313_data *data,
 			 int (*setup)(struct device *, struct regmap *))
 {
-	unsigned int regval;
 	int ret;
 
-	/* Ensures the device is in a consistent state after start up */
-	ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET,
-			   ADXL313_SOFT_RESET);
-	if (ret)
-		return ret;
+	/*
+	 * If sw reset available, ensures the device is in a consistent
+	 * state after start up
+	 */
+	if (data->chip_info->soft_reset) {
+		ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET,
+				   ADXL313_SOFT_RESET);
+		if (ret)
+			return ret;
+	}
 
 	if (setup) {
 		ret = setup(dev, data->regmap);
@@ -238,46 +349,25 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
 			return ret;
 	}
 
-	ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, &regval);
+	ret = data->chip_info->check_id(dev, data);
 	if (ret)
 		return ret;
 
-	if (regval != ADXL313_DEVID0) {
-		dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval);
-		return -ENODEV;
-	}
-
-	ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, &regval);
-	if (ret)
-		return ret;
-
-	if (regval != ADXL313_DEVID1) {
-		dev_err(dev, "Invalid mems ID: 0x%02x\n", regval);
-		return -ENODEV;
-	}
-
-	ret = regmap_read(data->regmap, ADXL313_REG_PARTID, &regval);
-	if (ret)
-		return ret;
+	/* Sets the range to maximum, full resolution, if applicable */
+	if (data->chip_info->variable_range) {
+		ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
+					 ADXL313_RANGE_MSK,
+					 FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_MAX));
+		if (ret)
+			return ret;
 
-	if (regval != ADXL313_PARTID) {
-		dev_err(dev, "Invalid device ID: 0x%02x\n", regval);
-		return -ENODEV;
+		/* Enables full resolution */
+		ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
+					 ADXL313_FULL_RES, ADXL313_FULL_RES);
+		if (ret)
+			return ret;
 	}
 
-	/* Sets the range to +/- 4g */
-	ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
-				 ADXL313_RANGE_MSK,
-				 FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_4G));
-	if (ret)
-		return ret;
-
-	/* Enables full resolution */
-	ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
-				 ADXL313_FULL_RES, ADXL313_FULL_RES);
-	if (ret)
-		return ret;
-
 	/* Enables measurement mode */
 	return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL,
 				  ADXL313_POWER_CTL_MSK,
@@ -288,7 +378,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
  * adxl313_core_probe() - probe and setup for adxl313 accelerometer
  * @dev:	Driver model representation of the device
  * @regmap:	Register map of the device
- * @name:	Device name buffer reference
+ * @chip_info:	Structure containing device specific data
  * @setup:	Setup routine to be executed right before the standard device
  *		setup, can also be set to NULL if not required
  *
@@ -296,7 +386,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
  */
 int adxl313_core_probe(struct device *dev,
 		       struct regmap *regmap,
-		       const char *name,
+		       const struct adxl313_chip_info *chip_info,
 		       int (*setup)(struct device *, struct regmap *))
 {
 	struct adxl313_data *data;
@@ -309,9 +399,11 @@ int adxl313_core_probe(struct device *dev,
 
 	data = iio_priv(indio_dev);
 	data->regmap = regmap;
+	data->chip_info = chip_info;
+
 	mutex_init(&data->lock);
 
-	indio_dev->name = name;
+	indio_dev->name = chip_info->name;
 	indio_dev->info = &adxl313_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = adxl313_channels;
diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c
index c329765dbf60..99cc7fc29488 100644
--- a/drivers/iio/accel/adxl313_i2c.c
+++ b/drivers/iio/accel/adxl313_i2c.c
@@ -14,42 +14,72 @@
 
 #include "adxl313.h"
 
-static const struct regmap_config adxl313_i2c_regmap_config = {
-	.reg_bits	= 8,
-	.val_bits	= 8,
-	.rd_table	= &adxl313_readable_regs_table,
-	.wr_table	= &adxl313_writable_regs_table,
-	.max_register	= 0x39,
+static const struct regmap_config adxl31x_i2c_regmap_config[] = {
+	[ADXL312] = {
+		.reg_bits	= 8,
+		.val_bits	= 8,
+		.rd_table	= &adxl312_readable_regs_table,
+		.wr_table	= &adxl312_writable_regs_table,
+		.max_register	= 0x39,
+	},
+	[ADXL313] = {
+		.reg_bits	= 8,
+		.val_bits	= 8,
+		.rd_table	= &adxl313_readable_regs_table,
+		.wr_table	= &adxl313_writable_regs_table,
+		.max_register	= 0x39,
+	},
+	[ADXL314] = {
+		.reg_bits	= 8,
+		.val_bits	= 8,
+		.rd_table	= &adxl314_readable_regs_table,
+		.wr_table	= &adxl314_writable_regs_table,
+		.max_register	= 0x39,
+	},
 };
 
-static int adxl313_i2c_probe(struct i2c_client *client)
-{
-	struct regmap *regmap;
-
-	regmap = devm_regmap_init_i2c(client, &adxl313_i2c_regmap_config);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
-			PTR_ERR(regmap));
-		return PTR_ERR(regmap);
-	}
-
-	return adxl313_core_probe(&client->dev, regmap, client->name, NULL);
-}
-
 static const struct i2c_device_id adxl313_i2c_id[] = {
-	{ "adxl313" },
+	{ .name = "adxl312", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
+	{ .name = "adxl313", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
+	{ .name = "adxl314", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
 	{ }
 };
 
 MODULE_DEVICE_TABLE(i2c, adxl313_i2c_id);
 
 static const struct of_device_id adxl313_of_match[] = {
-	{ .compatible = "adi,adxl313" },
+	{ .compatible = "adi,adxl312", .data = &adxl31x_chip_info[ADXL312] },
+	{ .compatible = "adi,adxl313", .data = &adxl31x_chip_info[ADXL313] },
+	{ .compatible = "adi,adxl314", .data = &adxl31x_chip_info[ADXL314] },
 	{ }
 };
 
 MODULE_DEVICE_TABLE(of, adxl313_of_match);
 
+static int adxl313_i2c_probe(struct i2c_client *client)
+{
+	const struct adxl313_chip_info *chip_data;
+	struct regmap *regmap;
+
+	/*
+	 * Retrieves device specific data as a pointer to a
+	 * adxl313_chip_info structure
+	 */
+	chip_data = device_get_match_data(&client->dev);
+	if (!chip_data)
+		chip_data = (const struct adxl313_chip_info *)i2c_match_id(adxl313_i2c_id, client)->driver_data;
+
+	regmap = devm_regmap_init_i2c(client,
+				      &adxl31x_i2c_regmap_config[chip_data->type]);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return adxl313_core_probe(&client->dev, regmap, chip_data, NULL);
+}
+
 static struct i2c_driver adxl313_i2c_driver = {
 	.driver = {
 		.name	= "adxl313_i2c",
diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c
index a3c6d553462d..b7cc15678a2b 100644
--- a/drivers/iio/accel/adxl313_spi.c
+++ b/drivers/iio/accel/adxl313_spi.c
@@ -11,17 +11,38 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
+#include <linux/property.h>
 
 #include "adxl313.h"
 
-static const struct regmap_config adxl313_spi_regmap_config = {
-	.reg_bits	= 8,
-	.val_bits	= 8,
-	.rd_table	= &adxl313_readable_regs_table,
-	.wr_table	= &adxl313_writable_regs_table,
-	.max_register	= 0x39,
-	 /* Setting bits 7 and 6 enables multiple-byte read */
-	.read_flag_mask	= BIT(7) | BIT(6),
+static const struct regmap_config adxl31x_spi_regmap_config[] = {
+	[ADXL312] = {
+		.reg_bits	= 8,
+		.val_bits	= 8,
+		.rd_table	= &adxl312_readable_regs_table,
+		.wr_table	= &adxl312_writable_regs_table,
+		.max_register	= 0x39,
+		/* Setting bits 7 and 6 enables multiple-byte read */
+		.read_flag_mask	= BIT(7) | BIT(6),
+	},
+	[ADXL313] = {
+		.reg_bits	= 8,
+		.val_bits	= 8,
+		.rd_table	= &adxl313_readable_regs_table,
+		.wr_table	= &adxl313_writable_regs_table,
+		.max_register	= 0x39,
+		/* Setting bits 7 and 6 enables multiple-byte read */
+		.read_flag_mask	= BIT(7) | BIT(6),
+	},
+	[ADXL314] = {
+		.reg_bits	= 8,
+		.val_bits	= 8,
+		.rd_table	= &adxl314_readable_regs_table,
+		.wr_table	= &adxl314_writable_regs_table,
+		.max_register	= 0x39,
+		/* Setting bits 7 and 6 enables multiple-byte read */
+		.read_flag_mask	= BIT(7) | BIT(6),
+	},
 };
 
 static int adxl313_spi_setup(struct device *dev, struct regmap *regmap)
@@ -42,7 +63,7 @@ static int adxl313_spi_setup(struct device *dev, struct regmap *regmap)
 
 static int adxl313_spi_probe(struct spi_device *spi)
 {
-	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct adxl313_chip_info *chip_data;
 	struct regmap *regmap;
 	int ret;
 
@@ -51,26 +72,40 @@ static int adxl313_spi_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config);
+	/*
+	 * Retrieves device specific data as a pointer to a
+	 * adxl313_chip_info structure
+	 */
+	chip_data = device_get_match_data(&spi->dev);
+	if (!chip_data)
+		chip_data = (const struct adxl313_chip_info *)spi_get_device_id(spi)->driver_data;
+
+	regmap = devm_regmap_init_spi(spi,
+				      &adxl31x_spi_regmap_config[chip_data->type]);
+
 	if (IS_ERR(regmap)) {
 		dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
 			PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
-	return adxl313_core_probe(&spi->dev, regmap, id->name,
-				  &adxl313_spi_setup);
+	return adxl313_core_probe(&spi->dev, regmap,
+				  chip_data, &adxl313_spi_setup);
 }
 
 static const struct spi_device_id adxl313_spi_id[] = {
-	{ "adxl313" },
+	{ .name = "adxl312", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
+	{ .name = "adxl313", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL313] },
+	{ .name = "adxl314", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL314] },
 	{ }
 };
 
 MODULE_DEVICE_TABLE(spi, adxl313_spi_id);
 
 static const struct of_device_id adxl313_of_match[] = {
-	{ .compatible = "adi,adxl313" },
+	{ .compatible = "adi,adxl312", .data = &adxl31x_chip_info[ADXL312] },
+	{ .compatible = "adi,adxl313", .data = &adxl31x_chip_info[ADXL313] },
+	{ .compatible = "adi,adxl314", .data = &adxl31x_chip_info[ADXL314] },
 	{ }
 };
 
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 370bfec1275a..1919e0089c11 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
+#include <linux/units.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -32,7 +33,6 @@
 
 #define ADXL345_BW_RATE			GENMASK(3, 0)
 #define ADXL345_BASE_RATE_NANO_HZ	97656250LL
-#define NHZ_PER_HZ			1000000000LL
 
 #define ADXL345_POWER_CTL_MEASURE	BIT(3)
 #define ADXL345_POWER_CTL_STANDBY	0x00
@@ -139,7 +139,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 
 		samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ <<
 				(regval & ADXL345_BW_RATE);
-		*val = div_s64_rem(samp_freq_nhz, NHZ_PER_HZ, val2);
+		*val = div_s64_rem(samp_freq_nhz, NANOHZ_PER_HZ, val2);
 
 		return IIO_VAL_INT_PLUS_NANO;
 	}
@@ -164,7 +164,8 @@ static int adxl345_write_raw(struct iio_dev *indio_dev,
 				    ADXL345_REG_OFS_AXIS(chan->address),
 				    val / 4);
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		n = div_s64(val * NHZ_PER_HZ + val2, ADXL345_BASE_RATE_NANO_HZ);
+		n = div_s64(val * NANOHZ_PER_HZ + val2,
+			    ADXL345_BASE_RATE_NANO_HZ);
 
 		return regmap_update_bits(data->regmap, ADXL345_REG_BW_RATE,
 					  ADXL345_BW_RATE,
diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
index e8f802a82300..36edbaff4f7f 100644
--- a/drivers/iio/accel/bma400.h
+++ b/drivers/iio/accel/bma400.h
@@ -40,6 +40,7 @@
 #define BMA400_INT_STAT1_REG        0x0f
 #define BMA400_INT_STAT2_REG        0x10
 #define BMA400_INT12_MAP_REG        0x23
+#define BMA400_INT_ENG_OVRUN_MSK    BIT(4)
 
 /* Temperature register */
 #define BMA400_TEMP_DATA_REG        0x11
@@ -105,6 +106,19 @@
 #define BMA400_INT_GEN2_MSK         BIT(3)
 #define BMA400_GEN_HYST_MSK         GENMASK(1, 0)
 
+/* TAP config registers */
+#define BMA400_TAP_CONFIG           0x57
+#define BMA400_TAP_CONFIG1          0x58
+#define BMA400_S_TAP_MSK            BIT(2)
+#define BMA400_D_TAP_MSK            BIT(3)
+#define BMA400_INT_S_TAP_MSK        BIT(10)
+#define BMA400_INT_D_TAP_MSK        BIT(11)
+#define BMA400_TAP_SEN_MSK          GENMASK(2, 0)
+#define BMA400_TAP_TICSTH_MSK       GENMASK(1, 0)
+#define BMA400_TAP_QUIET_MSK        GENMASK(3, 2)
+#define BMA400_TAP_QUIETDT_MSK      GENMASK(5, 4)
+#define BMA400_TAP_TIM_LIST_LEN     4
+
 /*
  * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before
  * converting to micro values for +-2g range.
diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
index c31bdd9b168e..ad8fce3e08cd 100644
--- a/drivers/iio/accel/bma400_core.c
+++ b/drivers/iio/accel/bma400_core.c
@@ -26,6 +26,7 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/events.h>
+#include <linux/iio/sysfs.h>
 #include <linux/iio/trigger.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
@@ -47,6 +48,27 @@ static int bma400_sample_freqs[14];
 
 static const int bma400_osr_range[] = { 0, 1, 3 };
 
+static int tap_reset_timeout[BMA400_TAP_TIM_LIST_LEN] = {
+	300000,
+	400000,
+	500000,
+	600000
+};
+
+static int tap_max2min_time[BMA400_TAP_TIM_LIST_LEN] = {
+	30000,
+	45000,
+	60000,
+	90000
+};
+
+static int double_tap2_min_delay[BMA400_TAP_TIM_LIST_LEN] = {
+	20000,
+	40000,
+	60000,
+	80000
+};
+
 /* See the ACC_CONFIG0 section of the datasheet */
 enum bma400_power_mode {
 	POWER_MODE_SLEEP   = 0x00,
@@ -88,6 +110,7 @@ struct bma400_data {
 	bool step_event_en;
 	bool activity_event_en;
 	unsigned int generic_event_en;
+	unsigned int tap_event_en_bitmask;
 	/* Correct time stamp alignment */
 	struct {
 		__le16 buff[3];
@@ -216,6 +239,115 @@ static const struct iio_event_spec bma400_accel_event[] = {
 				       BIT(IIO_EV_INFO_HYSTERESIS) |
 				       BIT(IIO_EV_INFO_ENABLE),
 	},
+	{
+		.type = IIO_EV_TYPE_GESTURE,
+		.dir = IIO_EV_DIR_SINGLETAP,
+		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+				       BIT(IIO_EV_INFO_ENABLE) |
+				       BIT(IIO_EV_INFO_RESET_TIMEOUT),
+	},
+	{
+		.type = IIO_EV_TYPE_GESTURE,
+		.dir = IIO_EV_DIR_DOUBLETAP,
+		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+				       BIT(IIO_EV_INFO_ENABLE) |
+				       BIT(IIO_EV_INFO_RESET_TIMEOUT) |
+				       BIT(IIO_EV_INFO_TAP2_MIN_DELAY),
+	},
+};
+
+static int usec_to_tapreg_raw(int usec, const int *time_list)
+{
+	int index;
+
+	for (index = 0; index < BMA400_TAP_TIM_LIST_LEN; index++) {
+		if (usec == time_list[index])
+			return index;
+	}
+	return -EINVAL;
+}
+
+static ssize_t in_accel_gesture_tap_maxtomin_time_show(struct device *dev,
+						       struct device_attribute *attr,
+						       char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bma400_data *data = iio_priv(indio_dev);
+	int ret, reg_val, raw, vals[2];
+
+	ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, &reg_val);
+	if (ret)
+		return ret;
+
+	raw = FIELD_GET(BMA400_TAP_TICSTH_MSK, reg_val);
+	vals[0] = 0;
+	vals[1] = tap_max2min_time[raw];
+
+	return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals);
+}
+
+static ssize_t in_accel_gesture_tap_maxtomin_time_store(struct device *dev,
+							struct device_attribute *attr,
+							const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bma400_data *data = iio_priv(indio_dev);
+	int ret, val_int, val_fract, raw;
+
+	ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract);
+	if (ret)
+		return ret;
+
+	raw = usec_to_tapreg_raw(val_fract, tap_max2min_time);
+	if (raw < 0)
+		return -EINVAL;
+
+	ret = regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1,
+				 BMA400_TAP_TICSTH_MSK,
+				 FIELD_PREP(BMA400_TAP_TICSTH_MSK, raw));
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_maxtomin_time, 0);
+
+/*
+ * Tap interrupts works with 200 Hz input data rate and the time based tap
+ * controls are in the terms of data samples so the below calculation is
+ * used to convert the configuration values into seconds.
+ * e.g.:
+ * 60 data samples * 0.005 ms = 0.3 seconds.
+ * 80 data samples * 0.005 ms = 0.4 seconds.
+ */
+
+/* quiet configuration values in seconds */
+static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available,
+		      "0.3 0.4 0.5 0.6");
+
+/* tics_th configuration values in seconds */
+static IIO_CONST_ATTR(in_accel_gesture_tap_maxtomin_time_available,
+		      "0.03 0.045 0.06 0.09");
+
+/* quiet_dt configuration values in seconds */
+static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available,
+		      "0.02 0.04 0.06 0.08");
+
+/* List of sensitivity values available to configure tap interrupts */
+static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "0 1 2 3 4 5 6 7");
+
+static struct attribute *bma400_event_attributes[] = {
+	&iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr,
+	&iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr,
+	&iio_const_attr_in_accel_gesture_tap_maxtomin_time_available.dev_attr.attr,
+	&iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_gesture_tap_maxtomin_time.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group bma400_event_attribute_group = {
+	.attrs = bma400_event_attributes,
 };
 
 #define BMA400_ACC_CHANNEL(_index, _axis) { \
@@ -1012,6 +1144,12 @@ static int bma400_read_event_config(struct iio_dev *indio_dev,
 		case IIO_EV_DIR_FALLING:
 			return FIELD_GET(BMA400_INT_GEN2_MSK,
 					 data->generic_event_en);
+		case IIO_EV_DIR_SINGLETAP:
+			return FIELD_GET(BMA400_S_TAP_MSK,
+					 data->tap_event_en_bitmask);
+		case IIO_EV_DIR_DOUBLETAP:
+			return FIELD_GET(BMA400_D_TAP_MSK,
+					 data->tap_event_en_bitmask);
 		default:
 			return -EINVAL;
 		}
@@ -1046,7 +1184,8 @@ static int bma400_activity_event_en(struct bma400_data *data,
 				    enum iio_event_direction dir,
 				    int state)
 {
-	int ret, reg, msk, value, field_value;
+	int ret, reg, msk, value;
+	int field_value = 0;
 
 	switch (dir) {
 	case IIO_EV_DIR_RISING:
@@ -1101,6 +1240,80 @@ static int bma400_activity_event_en(struct bma400_data *data,
 	return 0;
 }
 
+static int bma400_tap_event_en(struct bma400_data *data,
+			       enum iio_event_direction dir, int state)
+{
+	unsigned int mask, field_value;
+	int ret;
+
+	/*
+	 * Tap interrupts can be configured only in normal mode.
+	 * See table in section 4.3 "Power modes - performance modes" of
+	 * datasheet v1.2.
+	 */
+	if (data->power_mode != POWER_MODE_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * Tap interrupts are operating with a data rate of 200Hz.
+	 * See section 4.7 "Tap sensing interrupt" in datasheet v1.2.
+	 */
+	if (data->sample_freq.hz != 200 && state) {
+		dev_err(data->dev, "Invalid data rate for tap interrupts.\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG,
+				 BMA400_S_TAP_MSK,
+				 FIELD_PREP(BMA400_S_TAP_MSK, state));
+	if (ret)
+		return ret;
+
+	switch (dir) {
+	case IIO_EV_DIR_SINGLETAP:
+		mask = BMA400_S_TAP_MSK;
+		set_mask_bits(&field_value, BMA400_S_TAP_MSK,
+			      FIELD_PREP(BMA400_S_TAP_MSK, state));
+		break;
+	case IIO_EV_DIR_DOUBLETAP:
+		mask = BMA400_D_TAP_MSK;
+		set_mask_bits(&field_value, BMA400_D_TAP_MSK,
+			      FIELD_PREP(BMA400_D_TAP_MSK, state));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, mask,
+				 field_value);
+	if (ret)
+		return ret;
+
+	set_mask_bits(&data->tap_event_en_bitmask, mask, field_value);
+
+	return 0;
+}
+
+static int bma400_disable_adv_interrupt(struct bma400_data *data)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, BMA400_INT_CONFIG0_REG, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(data->regmap, BMA400_INT_CONFIG1_REG, 0);
+	if (ret)
+		return ret;
+
+	data->tap_event_en_bitmask = 0;
+	data->generic_event_en = 0;
+	data->step_event_en = false;
+	data->activity_event_en = false;
+
+	return 0;
+}
+
 static int bma400_write_event_config(struct iio_dev *indio_dev,
 				     const struct iio_chan_spec *chan,
 				     enum iio_event_type type,
@@ -1111,10 +1324,20 @@ static int bma400_write_event_config(struct iio_dev *indio_dev,
 
 	switch (chan->type) {
 	case IIO_ACCEL:
-		mutex_lock(&data->mutex);
-		ret = bma400_activity_event_en(data, dir, state);
-		mutex_unlock(&data->mutex);
-		return ret;
+		switch (type) {
+		case IIO_EV_TYPE_MAG:
+			mutex_lock(&data->mutex);
+			ret = bma400_activity_event_en(data, dir, state);
+			mutex_unlock(&data->mutex);
+			return ret;
+		case IIO_EV_TYPE_GESTURE:
+			mutex_lock(&data->mutex);
+			ret = bma400_tap_event_en(data, dir, state);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
 	case IIO_STEPS:
 		mutex_lock(&data->mutex);
 		ret = bma400_steps_event_enable(data, state);
@@ -1157,10 +1380,13 @@ static int bma400_read_event_value(struct iio_dev *indio_dev,
 				   int *val, int *val2)
 {
 	struct bma400_data *data = iio_priv(indio_dev);
-	int ret, reg;
+	int ret, reg, reg_val, raw;
 
-	switch (chan->type) {
-	case IIO_ACCEL:
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (type) {
+	case IIO_EV_TYPE_MAG:
 		reg = get_gen_config_reg(dir);
 		if (reg < 0)
 			return -EINVAL;
@@ -1196,6 +1422,39 @@ static int bma400_read_event_value(struct iio_dev *indio_dev,
 		default:
 			return -EINVAL;
 		}
+	case IIO_EV_TYPE_GESTURE:
+		switch (info) {
+		case IIO_EV_INFO_VALUE:
+			ret = regmap_read(data->regmap, BMA400_TAP_CONFIG,
+					  &reg_val);
+			if (ret)
+				return ret;
+
+			*val = FIELD_GET(BMA400_TAP_SEN_MSK, reg_val);
+			return IIO_VAL_INT;
+		case IIO_EV_INFO_RESET_TIMEOUT:
+			ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1,
+					  &reg_val);
+			if (ret)
+				return ret;
+
+			raw = FIELD_GET(BMA400_TAP_QUIET_MSK, reg_val);
+			*val = 0;
+			*val2 = tap_reset_timeout[raw];
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_EV_INFO_TAP2_MIN_DELAY:
+			ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1,
+					  &reg_val);
+			if (ret)
+				return ret;
+
+			raw = FIELD_GET(BMA400_TAP_QUIETDT_MSK, reg_val);
+			*val = 0;
+			*val2 = double_tap2_min_delay[raw];
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
 	default:
 		return -EINVAL;
 	}
@@ -1209,10 +1468,13 @@ static int bma400_write_event_value(struct iio_dev *indio_dev,
 				    int val, int val2)
 {
 	struct bma400_data *data = iio_priv(indio_dev);
-	int reg, ret;
+	int reg, ret, raw;
 
-	switch (chan->type) {
-	case IIO_ACCEL:
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (type) {
+	case IIO_EV_TYPE_MAG:
 		reg = get_gen_config_reg(dir);
 		if (reg < 0)
 			return -EINVAL;
@@ -1248,6 +1510,40 @@ static int bma400_write_event_value(struct iio_dev *indio_dev,
 		default:
 			return -EINVAL;
 		}
+	case IIO_EV_TYPE_GESTURE:
+		switch (info) {
+		case IIO_EV_INFO_VALUE:
+			if (val < 0 || val > 7)
+				return -EINVAL;
+
+			return regmap_update_bits(data->regmap,
+						  BMA400_TAP_CONFIG,
+						  BMA400_TAP_SEN_MSK,
+						  FIELD_PREP(BMA400_TAP_SEN_MSK,
+							     val));
+		case IIO_EV_INFO_RESET_TIMEOUT:
+			raw = usec_to_tapreg_raw(val2, tap_reset_timeout);
+			if (raw < 0)
+				return -EINVAL;
+
+			return regmap_update_bits(data->regmap,
+						  BMA400_TAP_CONFIG1,
+						  BMA400_TAP_QUIET_MSK,
+						  FIELD_PREP(BMA400_TAP_QUIET_MSK,
+							     raw));
+		case IIO_EV_INFO_TAP2_MIN_DELAY:
+			raw = usec_to_tapreg_raw(val2, double_tap2_min_delay);
+			if (raw < 0)
+				return -EINVAL;
+
+			return regmap_update_bits(data->regmap,
+						  BMA400_TAP_CONFIG1,
+						  BMA400_TAP_QUIETDT_MSK,
+						  FIELD_PREP(BMA400_TAP_QUIETDT_MSK,
+							     raw));
+		default:
+			return -EINVAL;
+		}
 	default:
 		return -EINVAL;
 	}
@@ -1287,6 +1583,7 @@ static const struct iio_info bma400_info = {
 	.write_event_config = bma400_write_event_config,
 	.write_event_value = bma400_write_event_value,
 	.read_event_value = bma400_read_event_value,
+	.event_attrs = &bma400_event_attribute_group,
 };
 
 static const struct iio_trigger_ops bma400_trigger_ops = {
@@ -1350,6 +1647,32 @@ static irqreturn_t bma400_interrupt(int irq, void *private)
 	if (ret || !data->status)
 		goto unlock_err;
 
+	/*
+	 * Disable all advance interrupts if interrupt engine overrun occurs.
+	 * See section 4.7 "Interrupt engine overrun" in datasheet v1.2.
+	 */
+	if (FIELD_GET(BMA400_INT_ENG_OVRUN_MSK, le16_to_cpu(data->status))) {
+		bma400_disable_adv_interrupt(data);
+		dev_err(data->dev, "Interrupt engine overrun\n");
+		goto unlock_err;
+	}
+
+	if (FIELD_GET(BMA400_INT_S_TAP_MSK, le16_to_cpu(data->status)))
+		iio_push_event(indio_dev,
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+						  IIO_MOD_X_OR_Y_OR_Z,
+						  IIO_EV_TYPE_GESTURE,
+						  IIO_EV_DIR_SINGLETAP),
+			       timestamp);
+
+	if (FIELD_GET(BMA400_INT_D_TAP_MSK, le16_to_cpu(data->status)))
+		iio_push_event(indio_dev,
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+						  IIO_MOD_X_OR_Y_OR_Z,
+						  IIO_EV_TYPE_GESTURE,
+						  IIO_EV_DIR_DOUBLETAP),
+			       timestamp);
+
 	if (FIELD_GET(BMA400_INT_GEN1_MSK, le16_to_cpu(data->status)))
 		ev_dir = IIO_EV_DIR_RISING;
 
@@ -1467,5 +1790,6 @@ int bma400_probe(struct device *dev, struct regmap *regmap, int irq,
 EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400);
 
 MODULE_AUTHOR("Dan Robertson <dan@dlrobertson.com>");
+MODULE_AUTHOR("Jagath Jog J <jagathjog1996@gmail.com>");
 MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
index bca4cf98bf4d..84edcc78d796 100644
--- a/drivers/iio/accel/bmi088-accel-core.c
+++ b/drivers/iio/accel/bmi088-accel-core.c
@@ -606,7 +606,7 @@ void bmi088_accel_core_remove(struct device *dev)
 }
 EXPORT_SYMBOL_NS_GPL(bmi088_accel_core_remove, IIO_BMI088);
 
-static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev)
+static int bmi088_accel_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmi088_accel_data *data = iio_priv(indio_dev);
@@ -614,7 +614,7 @@ static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev)
 	return bmi088_accel_power_down(data);
 }
 
-static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev)
+static int bmi088_accel_runtime_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmi088_accel_data *data = iio_priv(indio_dev);
@@ -622,13 +622,10 @@ static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev)
 	return bmi088_accel_power_up(data);
 }
 
-const struct dev_pm_ops bmi088_accel_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
-	SET_RUNTIME_PM_OPS(bmi088_accel_runtime_suspend,
-			   bmi088_accel_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_NS_GPL(bmi088_accel_pm_ops, IIO_BMI088);
+EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS(bmi088_accel_pm_ops,
+				 bmi088_accel_runtime_suspend,
+				 bmi088_accel_runtime_resume, NULL,
+				 IIO_BMI088);
 
 MODULE_AUTHOR("Niek van Agt <niek.van.agt@topicproducts.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/bmi088-accel-spi.c b/drivers/iio/accel/bmi088-accel-spi.c
index 9e2ed3bd5661..ee540edd8412 100644
--- a/drivers/iio/accel/bmi088-accel-spi.c
+++ b/drivers/iio/accel/bmi088-accel-spi.c
@@ -80,7 +80,7 @@ MODULE_DEVICE_TABLE(spi, bmi088_accel_id);
 static struct spi_driver bmi088_accel_driver = {
 	.driver = {
 		.name	= "bmi088_accel_spi",
-		.pm	= &bmi088_accel_pm_ops,
+		.pm	= pm_ptr(&bmi088_accel_pm_ops),
 		.of_match_table = bmi088_of_match,
 	},
 	.probe		= bmi088_accel_probe,
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 94f7b6ac5c87..adc66b3615c0 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1064,7 +1064,7 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
 
 	/*
 	 * We will expect the enable and disable to do operation in
-	 * in reverse order. This will happen here anyway as our
+	 * reverse order. This will happen here anyway as our
 	 * resume operation uses sync mode runtime pm calls, the
 	 * suspend operation will be delayed by autosuspend delay
 	 * So the disable operation will still happen in reverse of
diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c
new file mode 100644
index 000000000000..2fded3759171
--- /dev/null
+++ b/drivers/iio/accel/msa311.c
@@ -0,0 +1,1321 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MEMSensing digital 3-Axis accelerometer
+ *
+ * MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+ * sensitivity consumer applications. It has dynamic user-selectable full
+ * scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+ * with output data rates from 1Hz to 1000Hz.
+ *
+ * MSA311 is available in an ultra small (2mm x 2mm, height 0.95mm) LGA package
+ * and is guaranteed to operate over -40C to +85C.
+ *
+ * This driver supports following MSA311 features:
+ *     - IIO interface
+ *     - Different power modes: NORMAL, SUSPEND
+ *     - ODR (Output Data Rate) selection
+ *     - Scale selection
+ *     - IIO triggered buffer
+ *     - NEW_DATA interrupt + trigger
+ *
+ * Below features to be done:
+ *     - Motion Events: ACTIVE, TAP, ORIENT, FREEFALL
+ *     - Low Power mode
+ *
+ * Copyright (c) 2022, SberDevices. All Rights Reserved.
+ *
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/string_helpers.h>
+#include <linux/units.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define MSA311_SOFT_RESET_REG     0x00
+#define MSA311_PARTID_REG         0x01
+#define MSA311_ACC_X_REG          0x02
+#define MSA311_ACC_Y_REG          0x04
+#define MSA311_ACC_Z_REG          0x06
+#define MSA311_MOTION_INT_REG     0x09
+#define MSA311_DATA_INT_REG       0x0A
+#define MSA311_TAP_ACTIVE_STS_REG 0x0B
+#define MSA311_ORIENT_STS_REG     0x0C
+#define MSA311_RANGE_REG          0x0F
+#define MSA311_ODR_REG            0x10
+#define MSA311_PWR_MODE_REG       0x11
+#define MSA311_SWAP_POLARITY_REG  0x12
+#define MSA311_INT_SET_0_REG      0x16
+#define MSA311_INT_SET_1_REG      0x17
+#define MSA311_INT_MAP_0_REG      0x19
+#define MSA311_INT_MAP_1_REG      0x1A
+#define MSA311_INT_CONFIG_REG     0x20
+#define MSA311_INT_LATCH_REG      0x21
+#define MSA311_FREEFALL_DUR_REG   0x22
+#define MSA311_FREEFALL_TH_REG    0x23
+#define MSA311_FREEFALL_HY_REG    0x24
+#define MSA311_ACTIVE_DUR_REG     0x27
+#define MSA311_ACTIVE_TH_REG      0x28
+#define MSA311_TAP_DUR_REG        0x2A
+#define MSA311_TAP_TH_REG         0x2B
+#define MSA311_ORIENT_HY_REG      0x2C
+#define MSA311_Z_BLOCK_REG        0x2D
+#define MSA311_OFFSET_X_REG       0x38
+#define MSA311_OFFSET_Y_REG       0x39
+#define MSA311_OFFSET_Z_REG       0x3A
+
+enum msa311_fields {
+	/* Soft_Reset */
+	F_SOFT_RESET_I2C, F_SOFT_RESET_SPI,
+	/* Motion_Interrupt */
+	F_ORIENT_INT, F_S_TAP_INT, F_D_TAP_INT, F_ACTIVE_INT, F_FREEFALL_INT,
+	/* Data_Interrupt */
+	F_NEW_DATA_INT,
+	/* Tap_Active_Status */
+	F_TAP_SIGN, F_TAP_FIRST_X, F_TAP_FIRST_Y, F_TAP_FIRST_Z, F_ACTV_SIGN,
+	F_ACTV_FIRST_X, F_ACTV_FIRST_Y, F_ACTV_FIRST_Z,
+	/* Orientation_Status */
+	F_ORIENT_Z, F_ORIENT_X_Y,
+	/* Range */
+	F_FS,
+	/* ODR */
+	F_X_AXIS_DIS, F_Y_AXIS_DIS, F_Z_AXIS_DIS, F_ODR,
+	/* Power Mode/Bandwidth */
+	F_PWR_MODE, F_LOW_POWER_BW,
+	/* Swap_Polarity */
+	F_X_POLARITY, F_Y_POLARITY, F_Z_POLARITY, F_X_Y_SWAP,
+	/* Int_Set_0 */
+	F_ORIENT_INT_EN, F_S_TAP_INT_EN, F_D_TAP_INT_EN, F_ACTIVE_INT_EN_Z,
+	F_ACTIVE_INT_EN_Y, F_ACTIVE_INT_EN_X,
+	/* Int_Set_1 */
+	F_NEW_DATA_INT_EN, F_FREEFALL_INT_EN,
+	/* Int_Map_0 */
+	F_INT1_ORIENT, F_INT1_S_TAP, F_INT1_D_TAP, F_INT1_ACTIVE,
+	F_INT1_FREEFALL,
+	/* Int_Map_1 */
+	F_INT1_NEW_DATA,
+	/* Int_Config */
+	F_INT1_OD, F_INT1_LVL,
+	/* Int_Latch */
+	F_RESET_INT, F_LATCH_INT,
+	/* Freefall_Hy */
+	F_FREEFALL_MODE, F_FREEFALL_HY,
+	/* Active_Dur */
+	F_ACTIVE_DUR,
+	/* Tap_Dur */
+	F_TAP_QUIET, F_TAP_SHOCK, F_TAP_DUR,
+	/* Tap_Th */
+	F_TAP_TH,
+	/* Orient_Hy */
+	F_ORIENT_HYST, F_ORIENT_BLOCKING, F_ORIENT_MODE,
+	/* Z_Block */
+	F_Z_BLOCKING,
+	/* End of register map */
+	F_MAX_FIELDS,
+};
+
+static const struct reg_field msa311_reg_fields[] = {
+	/* Soft_Reset */
+	[F_SOFT_RESET_I2C] = REG_FIELD(MSA311_SOFT_RESET_REG, 2, 2),
+	[F_SOFT_RESET_SPI] = REG_FIELD(MSA311_SOFT_RESET_REG, 5, 5),
+	/* Motion_Interrupt */
+	[F_ORIENT_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 6, 6),
+	[F_S_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 5, 5),
+	[F_D_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 4, 4),
+	[F_ACTIVE_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 2, 2),
+	[F_FREEFALL_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 0, 0),
+	/* Data_Interrupt */
+	[F_NEW_DATA_INT] = REG_FIELD(MSA311_DATA_INT_REG, 0, 0),
+	/* Tap_Active_Status */
+	[F_TAP_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 7, 7),
+	[F_TAP_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 6, 6),
+	[F_TAP_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 5, 5),
+	[F_TAP_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 4, 4),
+	[F_ACTV_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 3, 3),
+	[F_ACTV_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 2, 2),
+	[F_ACTV_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 1, 1),
+	[F_ACTV_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 0, 0),
+	/* Orientation_Status */
+	[F_ORIENT_Z] = REG_FIELD(MSA311_ORIENT_STS_REG, 6, 6),
+	[F_ORIENT_X_Y] = REG_FIELD(MSA311_ORIENT_STS_REG, 4, 5),
+	/* Range */
+	[F_FS] = REG_FIELD(MSA311_RANGE_REG, 0, 1),
+	/* ODR */
+	[F_X_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 7, 7),
+	[F_Y_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 6, 6),
+	[F_Z_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 5, 5),
+	[F_ODR] = REG_FIELD(MSA311_ODR_REG, 0, 3),
+	/* Power Mode/Bandwidth */
+	[F_PWR_MODE] = REG_FIELD(MSA311_PWR_MODE_REG, 6, 7),
+	[F_LOW_POWER_BW] = REG_FIELD(MSA311_PWR_MODE_REG, 1, 4),
+	/* Swap_Polarity */
+	[F_X_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 3, 3),
+	[F_Y_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 2, 2),
+	[F_Z_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 1, 1),
+	[F_X_Y_SWAP] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 0, 0),
+	/* Int_Set_0 */
+	[F_ORIENT_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 6, 6),
+	[F_S_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 5, 5),
+	[F_D_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 4, 4),
+	[F_ACTIVE_INT_EN_Z] = REG_FIELD(MSA311_INT_SET_0_REG, 2, 2),
+	[F_ACTIVE_INT_EN_Y] = REG_FIELD(MSA311_INT_SET_0_REG, 1, 1),
+	[F_ACTIVE_INT_EN_X] = REG_FIELD(MSA311_INT_SET_0_REG, 0, 0),
+	/* Int_Set_1 */
+	[F_NEW_DATA_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 4, 4),
+	[F_FREEFALL_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 3, 3),
+	/* Int_Map_0 */
+	[F_INT1_ORIENT] = REG_FIELD(MSA311_INT_MAP_0_REG, 6, 6),
+	[F_INT1_S_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 5, 5),
+	[F_INT1_D_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 4, 4),
+	[F_INT1_ACTIVE] = REG_FIELD(MSA311_INT_MAP_0_REG, 2, 2),
+	[F_INT1_FREEFALL] = REG_FIELD(MSA311_INT_MAP_0_REG, 0, 0),
+	/* Int_Map_1 */
+	[F_INT1_NEW_DATA] = REG_FIELD(MSA311_INT_MAP_1_REG, 0, 0),
+	/* Int_Config */
+	[F_INT1_OD] = REG_FIELD(MSA311_INT_CONFIG_REG, 1, 1),
+	[F_INT1_LVL] = REG_FIELD(MSA311_INT_CONFIG_REG, 0, 0),
+	/* Int_Latch */
+	[F_RESET_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 7, 7),
+	[F_LATCH_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 0, 3),
+	/* Freefall_Hy */
+	[F_FREEFALL_MODE] = REG_FIELD(MSA311_FREEFALL_HY_REG, 2, 2),
+	[F_FREEFALL_HY] = REG_FIELD(MSA311_FREEFALL_HY_REG, 0, 1),
+	/* Active_Dur */
+	[F_ACTIVE_DUR] = REG_FIELD(MSA311_ACTIVE_DUR_REG, 0, 1),
+	/* Tap_Dur */
+	[F_TAP_QUIET] = REG_FIELD(MSA311_TAP_DUR_REG, 7, 7),
+	[F_TAP_SHOCK] = REG_FIELD(MSA311_TAP_DUR_REG, 6, 6),
+	[F_TAP_DUR] = REG_FIELD(MSA311_TAP_DUR_REG, 0, 2),
+	/* Tap_Th */
+	[F_TAP_TH] = REG_FIELD(MSA311_TAP_TH_REG, 0, 4),
+	/* Orient_Hy */
+	[F_ORIENT_HYST] = REG_FIELD(MSA311_ORIENT_HY_REG, 4, 6),
+	[F_ORIENT_BLOCKING] = REG_FIELD(MSA311_ORIENT_HY_REG, 2, 3),
+	[F_ORIENT_MODE] = REG_FIELD(MSA311_ORIENT_HY_REG, 0, 1),
+	/* Z_Block */
+	[F_Z_BLOCKING] = REG_FIELD(MSA311_Z_BLOCK_REG, 0, 3),
+};
+
+#define MSA311_WHO_AM_I 0x13
+
+/*
+ * Possible Full Scale ranges
+ *
+ * Axis data is 12-bit signed value, so
+ *
+ * fs0 = (2 + 2) * 9.81 / (2^11) = 0.009580
+ * fs1 = (4 + 4) * 9.81 / (2^11) = 0.019160
+ * fs2 = (8 + 8) * 9.81 / (2^11) = 0.038320
+ * fs3 = (16 + 16) * 9.81 / (2^11) = 0.076641
+ */
+enum {
+	MSA311_FS_2G,
+	MSA311_FS_4G,
+	MSA311_FS_8G,
+	MSA311_FS_16G,
+};
+
+struct iio_decimal_fract {
+	int integral;
+	int microfract;
+};
+
+static const struct iio_decimal_fract msa311_fs_table[] = {
+	{0, 9580}, {0, 19160}, {0, 38320}, {0, 76641},
+};
+
+/* Possible Output Data Rate values */
+enum {
+	MSA311_ODR_1_HZ,
+	MSA311_ODR_1_95_HZ,
+	MSA311_ODR_3_9_HZ,
+	MSA311_ODR_7_81_HZ,
+	MSA311_ODR_15_63_HZ,
+	MSA311_ODR_31_25_HZ,
+	MSA311_ODR_62_5_HZ,
+	MSA311_ODR_125_HZ,
+	MSA311_ODR_250_HZ,
+	MSA311_ODR_500_HZ,
+	MSA311_ODR_1000_HZ,
+};
+
+static const struct iio_decimal_fract msa311_odr_table[] = {
+	{1, 0}, {1, 950000}, {3, 900000}, {7, 810000}, {15, 630000},
+	{31, 250000}, {62, 500000}, {125, 0}, {250, 0}, {500, 0}, {1000, 0},
+};
+
+/* All supported power modes */
+#define MSA311_PWR_MODE_NORMAL  0b00
+#define MSA311_PWR_MODE_LOW     0b01
+#define MSA311_PWR_MODE_UNKNOWN 0b10
+#define MSA311_PWR_MODE_SUSPEND 0b11
+static const char * const msa311_pwr_modes[] = {
+	[MSA311_PWR_MODE_NORMAL] = "normal",
+	[MSA311_PWR_MODE_LOW] = "low",
+	[MSA311_PWR_MODE_UNKNOWN] = "unknown",
+	[MSA311_PWR_MODE_SUSPEND] = "suspend",
+};
+
+/* Autosuspend delay */
+#define MSA311_PWR_SLEEP_DELAY_MS 2000
+
+/* Possible INT1 types and levels */
+enum {
+	MSA311_INT1_OD_PUSH_PULL,
+	MSA311_INT1_OD_OPEN_DRAIN,
+};
+
+enum {
+	MSA311_INT1_LVL_LOW,
+	MSA311_INT1_LVL_HIGH,
+};
+
+/* Latch INT modes */
+#define MSA311_LATCH_INT_NOT_LATCHED 0b0000
+#define MSA311_LATCH_INT_250MS       0b0001
+#define MSA311_LATCH_INT_500MS       0b0010
+#define MSA311_LATCH_INT_1S          0b0011
+#define MSA311_LATCH_INT_2S          0b0100
+#define MSA311_LATCH_INT_4S          0b0101
+#define MSA311_LATCH_INT_8S          0b0110
+#define MSA311_LATCH_INT_1MS         0b1010
+#define MSA311_LATCH_INT_2MS         0b1011
+#define MSA311_LATCH_INT_25MS        0b1100
+#define MSA311_LATCH_INT_50MS        0b1101
+#define MSA311_LATCH_INT_100MS       0b1110
+#define MSA311_LATCH_INT_LATCHED     0b0111
+
+static const struct regmap_range msa311_readonly_registers[] = {
+	regmap_reg_range(MSA311_PARTID_REG, MSA311_ORIENT_STS_REG),
+};
+
+static const struct regmap_access_table msa311_writeable_table = {
+	.no_ranges = msa311_readonly_registers,
+	.n_no_ranges = ARRAY_SIZE(msa311_readonly_registers),
+};
+
+static const struct regmap_range msa311_writeonly_registers[] = {
+	regmap_reg_range(MSA311_SOFT_RESET_REG, MSA311_SOFT_RESET_REG),
+};
+
+static const struct regmap_access_table msa311_readable_table = {
+	.no_ranges = msa311_writeonly_registers,
+	.n_no_ranges = ARRAY_SIZE(msa311_writeonly_registers),
+};
+
+static const struct regmap_range msa311_volatile_registers[] = {
+	regmap_reg_range(MSA311_ACC_X_REG, MSA311_ORIENT_STS_REG),
+};
+
+static const struct regmap_access_table msa311_volatile_table = {
+	.yes_ranges = msa311_volatile_registers,
+	.n_yes_ranges = ARRAY_SIZE(msa311_volatile_registers),
+};
+
+static const struct regmap_config msa311_regmap_config = {
+	.name = "msa311",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MSA311_OFFSET_Z_REG,
+	.wr_table = &msa311_writeable_table,
+	.rd_table = &msa311_readable_table,
+	.volatile_table = &msa311_volatile_table,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+#define MSA311_GENMASK(field) ({                \
+	typeof(&(msa311_reg_fields)[0]) _field; \
+	_field = &msa311_reg_fields[(field)];   \
+	GENMASK(_field->msb, _field->lsb);      \
+})
+
+/**
+ * struct msa311_priv - MSA311 internal private state
+ * @regs: Underlying I2C bus adapter used to abstract slave
+ *        register accesses
+ * @fields: Abstract objects for each registers fields access
+ * @dev: Device handler associated with appropriate bus client
+ * @lock: Protects msa311 device state between setup and data access routines
+ *        (power transitions, samp_freq/scale tune, retrieving axes data, etc)
+ * @chip_name: Chip name in the format "msa311-%02x" % partid
+ * @new_data_trig: Optional NEW_DATA interrupt driven trigger used
+ *                 to notify external consumers a new sample is ready
+ * @vdd: Optional external voltage regulator for the device power supply
+ */
+struct msa311_priv {
+	struct regmap *regs;
+	struct regmap_field *fields[F_MAX_FIELDS];
+
+	struct device *dev;
+	struct mutex lock;
+	char *chip_name;
+
+	struct iio_trigger *new_data_trig;
+	struct regulator *vdd;
+};
+
+enum msa311_si {
+	MSA311_SI_X,
+	MSA311_SI_Y,
+	MSA311_SI_Z,
+	MSA311_SI_TIMESTAMP,
+};
+
+#define MSA311_ACCEL_CHANNEL(axis) {                                        \
+	.type = IIO_ACCEL,                                                  \
+	.modified = 1,                                                      \
+	.channel2 = IIO_MOD_##axis,                                         \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),                       \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |              \
+				    BIT(IIO_CHAN_INFO_SAMP_FREQ),           \
+	.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE) |    \
+					      BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_index = MSA311_SI_##axis,                                     \
+	.scan_type = {                                                      \
+		.sign = 's',                                                \
+		.realbits = 12,                                             \
+		.storagebits = 16,                                          \
+		.shift = 4,                                                 \
+		.endianness = IIO_LE,                                       \
+	},                                                                  \
+	.datasheet_name = "ACC_"#axis,                                      \
+}
+
+static const struct iio_chan_spec msa311_channels[] = {
+	MSA311_ACCEL_CHANNEL(X),
+	MSA311_ACCEL_CHANNEL(Y),
+	MSA311_ACCEL_CHANNEL(Z),
+	IIO_CHAN_SOFT_TIMESTAMP(MSA311_SI_TIMESTAMP),
+};
+
+/**
+ * msa311_get_odr() - Read Output Data Rate (ODR) value from MSA311 accel
+ * @msa311: MSA311 internal private state
+ * @odr: output ODR value
+ *
+ * This function should be called under msa311->lock.
+ *
+ * Return: 0 on success, -ERRNO in other failures
+ */
+static int msa311_get_odr(struct msa311_priv *msa311, unsigned int *odr)
+{
+	int err;
+
+	err = regmap_field_read(msa311->fields[F_ODR], odr);
+	if (err)
+		return err;
+
+	/*
+	 * Filter the same 1000Hz ODR register values based on datasheet info.
+	 * ODR can be equal to 1010-1111 for 1000Hz, but function returns 1010
+	 * all the time.
+	 */
+	if (*odr > MSA311_ODR_1000_HZ)
+		*odr = MSA311_ODR_1000_HZ;
+
+	return 0;
+}
+
+/**
+ * msa311_set_odr() - Setup Output Data Rate (ODR) value for MSA311 accel
+ * @msa311: MSA311 internal private state
+ * @odr: requested ODR value
+ *
+ * This function should be called under msa311->lock. Possible ODR values:
+ *     - 1Hz (not available in normal mode)
+ *     - 1.95Hz (not available in normal mode)
+ *     - 3.9Hz
+ *     - 7.81Hz
+ *     - 15.63Hz
+ *     - 31.25Hz
+ *     - 62.5Hz
+ *     - 125Hz
+ *     - 250Hz
+ *     - 500Hz
+ *     - 1000Hz
+ *
+ * Return: 0 on success, -EINVAL for bad ODR value in the certain power mode,
+ *         -ERRNO in other failures
+ */
+static int msa311_set_odr(struct msa311_priv *msa311, unsigned int odr)
+{
+	struct device *dev = msa311->dev;
+	unsigned int pwr_mode;
+	bool good_odr;
+	int err;
+
+	err = regmap_field_read(msa311->fields[F_PWR_MODE], &pwr_mode);
+	if (err)
+		return err;
+
+	/* Filter bad ODR values */
+	if (pwr_mode == MSA311_PWR_MODE_NORMAL)
+		good_odr = (odr > MSA311_ODR_1_95_HZ);
+	else
+		good_odr = false;
+
+	if (!good_odr) {
+		dev_err(dev,
+			"can't set odr %u.%06uHz, not available in %s mode\n",
+			msa311_odr_table[odr].integral,
+			msa311_odr_table[odr].microfract,
+			msa311_pwr_modes[pwr_mode]);
+		return -EINVAL;
+	}
+
+	return regmap_field_write(msa311->fields[F_ODR], odr);
+}
+
+/**
+ * msa311_wait_for_next_data() - Wait next accel data available after resume
+ * @msa311: MSA311 internal private state
+ *
+ * Return: 0 on success, -EINTR if msleep() was interrupted,
+ *         -ERRNO in other failures
+ */
+static int msa311_wait_for_next_data(struct msa311_priv *msa311)
+{
+	static const unsigned int unintr_thresh_ms = 20;
+	struct device *dev = msa311->dev;
+	unsigned long freq_uhz;
+	unsigned long wait_ms;
+	unsigned int odr;
+	int err;
+
+	err = msa311_get_odr(msa311, &odr);
+	if (err) {
+		dev_err(dev, "can't get actual frequency (%pe)\n",
+			ERR_PTR(err));
+		return err;
+	}
+
+	/*
+	 * After msa311 resuming is done, we need to wait for data
+	 * to be refreshed by accel logic.
+	 * A certain timeout is calculated based on the current ODR value.
+	 * If requested timeout isn't so long (let's assume 20ms),
+	 * we can wait for next data in uninterruptible sleep.
+	 */
+	freq_uhz = msa311_odr_table[odr].integral * MICROHZ_PER_HZ +
+		   msa311_odr_table[odr].microfract;
+	wait_ms = (MICROHZ_PER_HZ / freq_uhz) * MSEC_PER_SEC;
+
+	if (wait_ms < unintr_thresh_ms)
+		usleep_range(wait_ms * USEC_PER_MSEC,
+			     unintr_thresh_ms * USEC_PER_MSEC);
+	else if (msleep_interruptible(wait_ms))
+		return -EINTR;
+
+	return 0;
+}
+
+/**
+ * msa311_set_pwr_mode() - Install certain MSA311 power mode
+ * @msa311: MSA311 internal private state
+ * @mode: Power mode can be equal to NORMAL or SUSPEND
+ *
+ * This function should be called under msa311->lock.
+ *
+ * Return: 0 on success, -ERRNO on failure
+ */
+static int msa311_set_pwr_mode(struct msa311_priv *msa311, unsigned int mode)
+{
+	struct device *dev = msa311->dev;
+	unsigned int prev_mode;
+	int err;
+
+	if (mode >= ARRAY_SIZE(msa311_pwr_modes))
+		return -EINVAL;
+
+	dev_dbg(dev, "transition to %s mode\n", msa311_pwr_modes[mode]);
+
+	err = regmap_field_read(msa311->fields[F_PWR_MODE], &prev_mode);
+	if (err)
+		return err;
+
+	err = regmap_field_write(msa311->fields[F_PWR_MODE], mode);
+	if (err)
+		return err;
+
+	/* Wait actual data if we wake up */
+	if (prev_mode == MSA311_PWR_MODE_SUSPEND &&
+	    mode == MSA311_PWR_MODE_NORMAL)
+		return msa311_wait_for_next_data(msa311);
+
+	return 0;
+}
+
+/**
+ * msa311_get_axis() - Read MSA311 accel data for certain IIO channel axis spec
+ * @msa311: MSA311 internal private state
+ * @chan: IIO channel specification
+ * @axis: Output accel axis data for requested IIO channel spec
+ *
+ * This function should be called under msa311->lock.
+ *
+ * Return: 0 on success, -EINVAL for unknown IIO channel specification,
+ *         -ERRNO in other failures
+ */
+static int msa311_get_axis(struct msa311_priv *msa311,
+			   const struct iio_chan_spec * const chan,
+			   __le16 *axis)
+{
+	struct device *dev = msa311->dev;
+	unsigned int axis_reg;
+
+	if (chan->scan_index < MSA311_SI_X || chan->scan_index > MSA311_SI_Z) {
+		dev_err(dev, "invalid scan_index value [%d]\n",
+			chan->scan_index);
+		return -EINVAL;
+	}
+
+	/* Axes data layout has 2 byte gap for each axis starting from X axis */
+	axis_reg = MSA311_ACC_X_REG + (chan->scan_index << 1);
+
+	return regmap_bulk_read(msa311->regs, axis_reg, axis, sizeof(*axis));
+}
+
+static int msa311_read_raw_data(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+	__le16 axis;
+	int err;
+
+	err = pm_runtime_resume_and_get(dev);
+	if (err)
+		return err;
+
+	err = iio_device_claim_direct_mode(indio_dev);
+	if (err)
+		return err;
+
+	mutex_lock(&msa311->lock);
+	err = msa311_get_axis(msa311, chan, &axis);
+	mutex_unlock(&msa311->lock);
+
+	iio_device_release_direct_mode(indio_dev);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	if (err) {
+		dev_err(dev, "can't get axis %s (%pe)\n",
+			chan->datasheet_name, ERR_PTR(err));
+		return err;
+	}
+
+	/*
+	 * Axis data format is:
+	 * ACC_X = (ACC_X_MSB[7:0] << 4) | ACC_X_LSB[7:4]
+	 */
+	*val = sign_extend32(le16_to_cpu(axis) >> chan->scan_type.shift,
+			     chan->scan_type.realbits - 1);
+
+	return IIO_VAL_INT;
+}
+
+static int msa311_read_scale(struct iio_dev *indio_dev, int *val, int *val2)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+	unsigned int fs;
+	int err;
+
+	mutex_lock(&msa311->lock);
+	err = regmap_field_read(msa311->fields[F_FS], &fs);
+	mutex_unlock(&msa311->lock);
+	if (err) {
+		dev_err(dev, "can't get actual scale (%pe)\n", ERR_PTR(err));
+		return err;
+	}
+
+	*val = msa311_fs_table[fs].integral;
+	*val2 = msa311_fs_table[fs].microfract;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int msa311_read_samp_freq(struct iio_dev *indio_dev,
+				 int *val, int *val2)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+	unsigned int odr;
+	int err;
+
+	mutex_lock(&msa311->lock);
+	err = msa311_get_odr(msa311, &odr);
+	mutex_unlock(&msa311->lock);
+	if (err) {
+		dev_err(dev, "can't get actual frequency (%pe)\n",
+			ERR_PTR(err));
+		return err;
+	}
+
+	*val = msa311_odr_table[odr].integral;
+	*val2 = msa311_odr_table[odr].microfract;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int msa311_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return msa311_read_raw_data(indio_dev, chan, val, val2);
+
+	case IIO_CHAN_INFO_SCALE:
+		return msa311_read_scale(indio_dev, val, val2);
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return msa311_read_samp_freq(indio_dev, val, val2);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int msa311_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type,
+			     int *length, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (int *)msa311_odr_table;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		/* ODR value has 2 ints (integer and fractional parts) */
+		*length = ARRAY_SIZE(msa311_odr_table) * 2;
+		return IIO_AVAIL_LIST;
+
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (int *)msa311_fs_table;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		/* FS value has 2 ints (integer and fractional parts) */
+		*length = ARRAY_SIZE(msa311_fs_table) * 2;
+		return IIO_AVAIL_LIST;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int msa311_write_scale(struct iio_dev *indio_dev, int val, int val2)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+	unsigned int fs;
+	int err;
+
+	/* We do not have fs >= 1, so skip such values */
+	if (val)
+		return 0;
+
+	err = pm_runtime_resume_and_get(dev);
+	if (err)
+		return err;
+
+	err = -EINVAL;
+	for (fs = 0; fs < ARRAY_SIZE(msa311_fs_table); fs++)
+		/* Do not check msa311_fs_table[fs].integral, it's always 0 */
+		if (val2 == msa311_fs_table[fs].microfract) {
+			mutex_lock(&msa311->lock);
+			err = regmap_field_write(msa311->fields[F_FS], fs);
+			mutex_unlock(&msa311->lock);
+			break;
+		}
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	if (err)
+		dev_err(dev, "can't update scale (%pe)\n", ERR_PTR(err));
+
+	return err;
+}
+
+static int msa311_write_samp_freq(struct iio_dev *indio_dev, int val, int val2)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+	unsigned int odr;
+	int err;
+
+	err = pm_runtime_resume_and_get(dev);
+	if (err)
+		return err;
+
+	/*
+	 * Sampling frequency changing is prohibited when buffer mode is
+	 * enabled, because sometimes MSA311 chip returns outliers during
+	 * frequency values growing up in the read operation moment.
+	 */
+	err = iio_device_claim_direct_mode(indio_dev);
+	if (err)
+		return err;
+
+	err = -EINVAL;
+	for (odr = 0; odr < ARRAY_SIZE(msa311_odr_table); odr++)
+		if (val == msa311_odr_table[odr].integral &&
+		    val2 == msa311_odr_table[odr].microfract) {
+			mutex_lock(&msa311->lock);
+			err = msa311_set_odr(msa311, odr);
+			mutex_unlock(&msa311->lock);
+			break;
+		}
+
+	iio_device_release_direct_mode(indio_dev);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	if (err)
+		dev_err(dev, "can't update frequency (%pe)\n", ERR_PTR(err));
+
+	return err;
+}
+
+static int msa311_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return msa311_write_scale(indio_dev, val, val2);
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return msa311_write_samp_freq(indio_dev, val, val2);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int msa311_debugfs_reg_access(struct iio_dev *indio_dev,
+				     unsigned int reg, unsigned int writeval,
+				     unsigned int *readval)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+	int err;
+
+	if (reg > regmap_get_max_register(msa311->regs))
+		return -EINVAL;
+
+	err = pm_runtime_resume_and_get(dev);
+	if (err)
+		return err;
+
+	mutex_lock(&msa311->lock);
+
+	if (readval)
+		err = regmap_read(msa311->regs, reg, readval);
+	else
+		err = regmap_write(msa311->regs, reg, writeval);
+
+	mutex_unlock(&msa311->lock);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	if (err)
+		dev_err(dev, "can't %s register %u from debugfs (%pe)\n",
+			str_read_write(readval), reg, ERR_PTR(err));
+
+	return err;
+}
+
+static int msa311_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+
+	return pm_runtime_resume_and_get(dev);
+}
+
+static int msa311_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static int msa311_set_new_data_trig_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	struct device *dev = msa311->dev;
+	int err;
+
+	mutex_lock(&msa311->lock);
+	err = regmap_field_write(msa311->fields[F_NEW_DATA_INT_EN], state);
+	mutex_unlock(&msa311->lock);
+	if (err)
+		dev_err(dev,
+			"can't %s buffer due to new_data_int failure (%pe)\n",
+			str_enable_disable(state), ERR_PTR(err));
+
+	return err;
+}
+
+static int msa311_validate_device(struct iio_trigger *trig,
+				  struct iio_dev *indio_dev)
+{
+	return iio_trigger_get_drvdata(trig) == indio_dev ? 0 : -EINVAL;
+}
+
+static irqreturn_t msa311_buffer_thread(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct msa311_priv *msa311 = iio_priv(pf->indio_dev);
+	struct iio_dev *indio_dev = pf->indio_dev;
+	const struct iio_chan_spec *chan;
+	struct device *dev = msa311->dev;
+	int bit, err, i = 0;
+	__le16 axis;
+	struct {
+		__le16 channels[MSA311_SI_Z + 1];
+		s64 ts __aligned(8);
+	} buf;
+
+	memset(&buf, 0, sizeof(buf));
+
+	mutex_lock(&msa311->lock);
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		chan = &msa311_channels[bit];
+
+		err = msa311_get_axis(msa311, chan, &axis);
+		if (err) {
+			mutex_unlock(&msa311->lock);
+			dev_err(dev, "can't get axis %s (%pe)\n",
+				chan->datasheet_name, ERR_PTR(err));
+			goto notify_done;
+		}
+
+		buf.channels[i++] = axis;
+	}
+
+	mutex_unlock(&msa311->lock);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &buf,
+					   iio_get_time_ns(indio_dev));
+
+notify_done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t msa311_irq_thread(int irq, void *p)
+{
+	struct msa311_priv *msa311 = iio_priv(p);
+	unsigned int new_data_int_enabled;
+	struct device *dev = msa311->dev;
+	int err;
+
+	mutex_lock(&msa311->lock);
+
+	/*
+	 * We do not check NEW_DATA int status, because based on the
+	 * specification it's cleared automatically after a fixed time.
+	 * So just check that is enabled by driver logic.
+	 */
+	err = regmap_field_read(msa311->fields[F_NEW_DATA_INT_EN],
+				&new_data_int_enabled);
+
+	mutex_unlock(&msa311->lock);
+	if (err) {
+		dev_err(dev, "can't read new_data interrupt state (%pe)\n",
+			ERR_PTR(err));
+		return IRQ_NONE;
+	}
+
+	if (new_data_int_enabled)
+		iio_trigger_poll_chained(msa311->new_data_trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info msa311_info = {
+	.read_raw = msa311_read_raw,
+	.read_avail = msa311_read_avail,
+	.write_raw = msa311_write_raw,
+	.debugfs_reg_access = msa311_debugfs_reg_access,
+};
+
+static const struct iio_buffer_setup_ops msa311_buffer_setup_ops = {
+	.preenable = msa311_buffer_preenable,
+	.postdisable = msa311_buffer_postdisable,
+};
+
+static const struct iio_trigger_ops msa311_new_data_trig_ops = {
+	.set_trigger_state = msa311_set_new_data_trig_state,
+	.validate_device = msa311_validate_device,
+};
+
+static int msa311_check_partid(struct msa311_priv *msa311)
+{
+	struct device *dev = msa311->dev;
+	unsigned int partid;
+	int err;
+
+	err = regmap_read(msa311->regs, MSA311_PARTID_REG, &partid);
+	if (err)
+		return dev_err_probe(dev, err, "failed to read partid\n");
+
+	if (partid != MSA311_WHO_AM_I)
+		dev_warn(dev, "invalid partid (%#x), expected (%#x)\n",
+			 partid, MSA311_WHO_AM_I);
+
+	msa311->chip_name = devm_kasprintf(dev, GFP_KERNEL,
+					   "msa311-%02x", partid);
+	if (!msa311->chip_name)
+		return dev_err_probe(dev, -ENOMEM, "can't alloc chip name\n");
+
+	return 0;
+}
+
+static int msa311_soft_reset(struct msa311_priv *msa311)
+{
+	struct device *dev = msa311->dev;
+	int err;
+
+	err = regmap_write(msa311->regs, MSA311_SOFT_RESET_REG,
+			   MSA311_GENMASK(F_SOFT_RESET_I2C) |
+			   MSA311_GENMASK(F_SOFT_RESET_SPI));
+	if (err)
+		return dev_err_probe(dev, err, "can't soft reset all logic\n");
+
+	return 0;
+}
+
+static int msa311_chip_init(struct msa311_priv *msa311)
+{
+	struct device *dev = msa311->dev;
+	const char zero_bulk[2] = { };
+	int err;
+
+	err = regmap_write(msa311->regs, MSA311_RANGE_REG, MSA311_FS_16G);
+	if (err)
+		return dev_err_probe(dev, err, "failed to setup accel range\n");
+
+	/* Disable all interrupts by default */
+	err = regmap_bulk_write(msa311->regs, MSA311_INT_SET_0_REG,
+				zero_bulk, sizeof(zero_bulk));
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't disable set0/set1 interrupts\n");
+
+	/* Unmap all INT1 interrupts by default */
+	err = regmap_bulk_write(msa311->regs, MSA311_INT_MAP_0_REG,
+				zero_bulk, sizeof(zero_bulk));
+	if (err)
+		return dev_err_probe(dev, err,
+				     "failed to unmap map0/map1 interrupts\n");
+
+	/* Disable all axes by default */
+	err = regmap_update_bits(msa311->regs, MSA311_ODR_REG,
+				 MSA311_GENMASK(F_X_AXIS_DIS) |
+				 MSA311_GENMASK(F_Y_AXIS_DIS) |
+				 MSA311_GENMASK(F_Z_AXIS_DIS), 0);
+	if (err)
+		return dev_err_probe(dev, err, "can't enable all axes\n");
+
+	err = msa311_set_odr(msa311, MSA311_ODR_125_HZ);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "failed to set accel frequency\n");
+
+	return 0;
+}
+
+static int msa311_setup_interrupts(struct msa311_priv *msa311)
+{
+	struct device *dev = msa311->dev;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct iio_dev *indio_dev = i2c_get_clientdata(i2c);
+	struct iio_trigger *trig;
+	int err;
+
+	/* Keep going without interrupts if no initialized I2C IRQ */
+	if (i2c->irq <= 0)
+		return 0;
+
+	err = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+					msa311_irq_thread, IRQF_ONESHOT,
+					msa311->chip_name, indio_dev);
+	if (err)
+		return dev_err_probe(dev, err, "failed to request IRQ\n");
+
+	trig = devm_iio_trigger_alloc(dev, "%s-new-data", msa311->chip_name);
+	if (!trig)
+		return dev_err_probe(dev, -ENOMEM,
+				     "can't allocate newdata trigger\n");
+
+	msa311->new_data_trig = trig;
+	msa311->new_data_trig->ops = &msa311_new_data_trig_ops;
+	iio_trigger_set_drvdata(msa311->new_data_trig, indio_dev);
+
+	err = devm_iio_trigger_register(dev, msa311->new_data_trig);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't register newdata trigger\n");
+
+	err = regmap_field_write(msa311->fields[F_INT1_OD],
+				 MSA311_INT1_OD_PUSH_PULL);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't enable push-pull interrupt\n");
+
+	err = regmap_field_write(msa311->fields[F_INT1_LVL],
+				 MSA311_INT1_LVL_HIGH);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't set active interrupt level\n");
+
+	err = regmap_field_write(msa311->fields[F_LATCH_INT],
+				 MSA311_LATCH_INT_LATCHED);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't latch interrupt\n");
+
+	err = regmap_field_write(msa311->fields[F_RESET_INT], 1);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't reset interrupt\n");
+
+	err = regmap_field_write(msa311->fields[F_INT1_NEW_DATA], 1);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't map new data interrupt\n");
+
+	return 0;
+}
+
+static int msa311_regmap_init(struct msa311_priv *msa311)
+{
+	struct regmap_field **fields = msa311->fields;
+	struct device *dev = msa311->dev;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct regmap *regmap;
+	int i;
+
+	regmap = devm_regmap_init_i2c(i2c, &msa311_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "failed to register i2c regmap\n");
+
+	msa311->regs = regmap;
+
+	for (i = 0; i < F_MAX_FIELDS; i++) {
+		fields[i] = devm_regmap_field_alloc(dev,
+						    msa311->regs,
+						    msa311_reg_fields[i]);
+		if (IS_ERR(msa311->fields[i]))
+			return dev_err_probe(dev, PTR_ERR(msa311->fields[i]),
+					     "can't alloc field[%d]\n", i);
+	}
+
+	return 0;
+}
+
+static void msa311_powerdown(void *msa311)
+{
+	msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND);
+}
+
+static void msa311_vdd_disable(void *vdd)
+{
+	regulator_disable(vdd);
+}
+
+static int msa311_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct msa311_priv *msa311;
+	struct iio_dev *indio_dev;
+	int err;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*msa311));
+	if (!indio_dev)
+		return dev_err_probe(dev, -ENOMEM,
+				     "IIO device allocation failed\n");
+
+	msa311 = iio_priv(indio_dev);
+	msa311->dev = dev;
+	i2c_set_clientdata(i2c, indio_dev);
+
+	err = msa311_regmap_init(msa311);
+	if (err)
+		return err;
+
+	mutex_init(&msa311->lock);
+
+	msa311->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(msa311->vdd))
+		return dev_err_probe(dev, PTR_ERR(msa311->vdd),
+				     "can't get vdd supply\n");
+
+	err = regulator_enable(msa311->vdd);
+	if (err)
+		return dev_err_probe(dev, err, "can't enable vdd supply\n");
+
+	err = devm_add_action_or_reset(dev, msa311_vdd_disable, msa311->vdd);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't add vdd disable action\n");
+
+	err = msa311_check_partid(msa311);
+	if (err)
+		return err;
+
+	err = msa311_soft_reset(msa311);
+	if (err)
+		return err;
+
+	err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL);
+	if (err)
+		return dev_err_probe(dev, err, "failed to power on device\n");
+
+	/*
+	 * Register powerdown deferred callback which suspends the chip
+	 * after module unloaded.
+	 *
+	 * MSA311 should be in SUSPEND mode in the two cases:
+	 * 1) When driver is loaded, but we do not have any data or
+	 *    configuration requests to it (we are solving it using
+	 *    autosuspend feature).
+	 * 2) When driver is unloaded and device is not used (devm action is
+	 *    used in this case).
+	 */
+	err = devm_add_action_or_reset(dev, msa311_powerdown, msa311);
+	if (err)
+		return dev_err_probe(dev, err, "can't add powerdown action\n");
+
+	err = pm_runtime_set_active(dev);
+	if (err)
+		return err;
+
+	err = devm_pm_runtime_enable(dev);
+	if (err)
+		return err;
+
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_autosuspend_delay(dev, MSA311_PWR_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+
+	err = msa311_chip_init(msa311);
+	if (err)
+		return err;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = msa311_channels;
+	indio_dev->num_channels = ARRAY_SIZE(msa311_channels);
+	indio_dev->name = msa311->chip_name;
+	indio_dev->info = &msa311_info;
+
+	err = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      msa311_buffer_thread,
+					      &msa311_buffer_setup_ops);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "can't setup IIO trigger buffer\n");
+
+	err = msa311_setup_interrupts(msa311);
+	if (err)
+		return err;
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	err = devm_iio_device_register(dev, indio_dev);
+	if (err)
+		return dev_err_probe(dev, err, "IIO device register failed\n");
+
+	return 0;
+}
+
+static int msa311_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	int err;
+
+	mutex_lock(&msa311->lock);
+	err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND);
+	mutex_unlock(&msa311->lock);
+	if (err)
+		dev_err(dev, "failed to power off device (%pe)\n",
+			ERR_PTR(err));
+
+	return err;
+}
+
+static int msa311_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct msa311_priv *msa311 = iio_priv(indio_dev);
+	int err;
+
+	mutex_lock(&msa311->lock);
+	err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL);
+	mutex_unlock(&msa311->lock);
+	if (err)
+		dev_err(dev, "failed to power on device (%pe)\n",
+			ERR_PTR(err));
+
+	return err;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(msa311_pm_ops, msa311_runtime_suspend,
+				 msa311_runtime_resume, NULL);
+
+static const struct i2c_device_id msa311_i2c_id[] = {
+	{ .name = "msa311" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, msa311_i2c_id);
+
+static const struct of_device_id msa311_of_match[] = {
+	{ .compatible = "memsensing,msa311" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, msa311_of_match);
+
+static struct i2c_driver msa311_driver = {
+	.driver = {
+		.name = "msa311",
+		.of_match_table = msa311_of_match,
+		.pm = pm_ptr(&msa311_pm_ops),
+	},
+	.probe_new	= msa311_probe,
+	.id_table	= msa311_i2c_id,
+};
+module_i2c_driver(msa311_driver);
+
+MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
+MODULE_DESCRIPTION("MEMSensing MSA311 3-axis accelerometer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7fe5930891e0..791612ca6012 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -653,6 +653,20 @@ config MAX1118
 	  To compile this driver as a module, choose M here: the module will be
 	  called max1118.
 
+config MAX11205
+	tristate "Maxim max11205 ADC driver"
+	depends on SPI
+	select AD_SIGMA_DELTA
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+	help
+	  Say yes here to build support for Maxim max11205 16-bit, single-channel
+	  ultra-low power delta-sigma ADC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max11205.
+
 config MAX1241
 	tristate "Maxim max1241 ADC driver"
 	depends on SPI_MASTER
@@ -718,6 +732,8 @@ config MCP3422
 config MCP3911
 	tristate "Microchip Technology MCP3911 driver"
 	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Microchip Technology's MCP3911
 	  analog to digital converter.
@@ -919,6 +935,21 @@ config ROCKCHIP_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rockchip_saradc.
 
+config RICHTEK_RTQ6056
+	tristate "Richtek RTQ6056 Current and Power Monitor ADC"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to enable RQT6056 ADC support.
+	  RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+	  compatible interface, and the device provides full information for
+	  system by reading out the load current and power.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called rtq6056.
+
 config RZG2L_ADC
 	tristate "Renesas RZ/G2L ADC driver"
 	depends on ARCH_RZG2L || COMPILE_TEST
@@ -1022,22 +1053,6 @@ config STMPE_ADC
 	  Say yes here to build support for ST Microelectronics STMPE
 	  built-in ADC block (stmpe811).
 
-config STX104
-	tristate "Apex Embedded Systems STX104 driver"
-	depends on PC104 && X86
-	select ISA_BUS_API
-	select GPIOLIB
-	help
-	  Say yes here to build support for the Apex Embedded Systems STX104
-	  integrated analog PC/104 card.
-
-	  This driver supports the 16 channels of single-ended (8 channels of
-	  differential) analog inputs, 2 channels of analog output, 4 digital
-	  inputs, and 4 digital outputs provided by the STX104.
-
-	  The base port addresses for the devices may be configured via the base
-	  array module parameter.
-
 config SUN4I_GPADC
 	tristate "Support for the Allwinner SoCs GPADC"
 	depends on IIO
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 1772a549a3c8..46caba7a010c 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o
 obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX11100) += max11100.o
 obj-$(CONFIG_MAX1118) += max1118.o
+obj-$(CONFIG_MAX11205) += max11205.o
 obj-$(CONFIG_MAX1241) += max1241.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MAX9611) += max9611.o
@@ -85,10 +86,10 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
 obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
 obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
+obj-$(CONFIG_RICHTEK_RTQ6056) += rtq6056.o
 obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
 obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
-obj-$(CONFIG_STX104) += stx104.o
 obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
 obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
 obj-$(CONFIG_STM32_ADC) += stm32-adc.o
diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c
index 930ce96e6ff5..4fa2126a354b 100644
--- a/drivers/iio/adc/ab8500-gpadc.c
+++ b/drivers/iio/adc/ab8500-gpadc.c
@@ -925,8 +925,8 @@ static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
-static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev,
-				 const struct of_phandle_args *iiospec)
+static int ab8500_gpadc_fwnode_xlate(struct iio_dev *indio_dev,
+				     const struct fwnode_reference_args *iiospec)
 {
 	int i;
 
@@ -938,7 +938,7 @@ static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev,
 }
 
 static const struct iio_info ab8500_gpadc_info = {
-	.of_xlate = ab8500_gpadc_of_xlate,
+	.fwnode_xlate = ab8500_gpadc_fwnode_xlate,
 	.read_raw = ab8500_gpadc_read_raw,
 };
 
@@ -968,7 +968,7 @@ static int ab8500_gpadc_runtime_resume(struct device *dev)
 /**
  * ab8500_gpadc_parse_channel() - process devicetree channel configuration
  * @dev: pointer to containing device
- * @np: device tree node for the channel to configure
+ * @fwnode: fw node for the channel to configure
  * @ch: channel info to fill in
  * @iio_chan: IIO channel specification to fill in
  *
@@ -976,15 +976,15 @@ static int ab8500_gpadc_runtime_resume(struct device *dev)
  * and define usage for things like AUX GPADC inputs more precisely.
  */
 static int ab8500_gpadc_parse_channel(struct device *dev,
-				      struct device_node *np,
+				      struct fwnode_handle *fwnode,
 				      struct ab8500_gpadc_chan_info *ch,
 				      struct iio_chan_spec *iio_chan)
 {
-	const char *name = np->name;
+	const char *name = fwnode_get_name(fwnode);
 	u32 chan;
 	int ret;
 
-	ret = of_property_read_u32(np, "reg", &chan);
+	ret = fwnode_property_read_u32(fwnode, "reg", &chan);
 	if (ret) {
 		dev_err(dev, "invalid channel number %s\n", name);
 		return ret;
@@ -1021,22 +1021,20 @@ static int ab8500_gpadc_parse_channel(struct device *dev,
 /**
  * ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT
  * @gpadc: the GPADC to configure the channels for
- * @np: device tree node containing the channel configurations
  * @chans: the IIO channels we parsed
  * @nchans: the number of IIO channels we parsed
  */
 static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
-				       struct device_node *np,
 				       struct iio_chan_spec **chans_parsed,
 				       unsigned int *nchans_parsed)
 {
-	struct device_node *child;
+	struct fwnode_handle *child;
 	struct ab8500_gpadc_chan_info *ch;
 	struct iio_chan_spec *iio_chans;
 	unsigned int nchans;
 	int i;
 
-	nchans = of_get_available_child_count(np);
+	nchans = device_get_child_node_count(gpadc->dev);
 	if (!nchans) {
 		dev_err(gpadc->dev, "no channel children\n");
 		return -ENODEV;
@@ -1054,7 +1052,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
 		return -ENOMEM;
 
 	i = 0;
-	for_each_available_child_of_node(np, child) {
+	device_for_each_child_node(gpadc->dev, child) {
 		struct iio_chan_spec *iio_chan;
 		int ret;
 
@@ -1064,7 +1062,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
 		ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch,
 						 iio_chan);
 		if (ret) {
-			of_node_put(child);
+			fwnode_handle_put(child);
 			return ret;
 		}
 		i++;
@@ -1081,7 +1079,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	struct ab8500_gpadc *gpadc;
 	struct iio_dev *indio_dev;
 	struct device *dev = &pdev->dev;
-	struct device_node *np = pdev->dev.of_node;
 	struct iio_chan_spec *iio_chans;
 	unsigned int n_iio_chans;
 	int ret;
@@ -1096,7 +1093,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	gpadc->dev = dev;
 	gpadc->ab8500 = dev_get_drvdata(dev->parent);
 
-	ret = ab8500_gpadc_parse_channels(gpadc, np, &iio_chans, &n_iio_chans);
+	ret = ab8500_gpadc_parse_channels(gpadc, &iio_chans, &n_iio_chans);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index c5b785d8b241..4088786e1026 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -936,11 +936,6 @@ static void ad7124_reg_disable(void *r)
 	regulator_disable(r);
 }
 
-static void ad7124_clk_disable(void *c)
-{
-	clk_disable_unprepare(c);
-}
-
 static int ad7124_probe(struct spi_device *spi)
 {
 	const struct ad7124_chip_info *info;
@@ -993,18 +988,10 @@ static int ad7124_probe(struct spi_device *spi)
 			return ret;
 	}
 
-	st->mclk = devm_clk_get(&spi->dev, "mclk");
+	st->mclk = devm_clk_get_enabled(&spi->dev, "mclk");
 	if (IS_ERR(st->mclk))
 		return PTR_ERR(st->mclk);
 
-	ret = clk_prepare_enable(st->mclk);
-	if (ret < 0)
-		return ret;
-
-	ret = devm_add_action_or_reset(&spi->dev, ad7124_clk_disable, st->mclk);
-	if (ret)
-		return ret;
-
 	ret = ad7124_soft_reset(st);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
index 652db768ef37..70a25949142c 100644
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -539,13 +539,6 @@ static void ad7768_regulator_disable(void *data)
 	regulator_disable(st->vref);
 }
 
-static void ad7768_clk_disable(void *data)
-{
-	struct ad7768_state *st = data;
-
-	clk_disable_unprepare(st->mclk);
-}
-
 static int ad7768_set_channel_label(struct iio_dev *indio_dev,
 						int num_channels)
 {
@@ -600,18 +593,10 @@ static int ad7768_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	st->mclk = devm_clk_get(&spi->dev, "mclk");
+	st->mclk = devm_clk_get_enabled(&spi->dev, "mclk");
 	if (IS_ERR(st->mclk))
 		return PTR_ERR(st->mclk);
 
-	ret = clk_prepare_enable(st->mclk);
-	if (ret < 0)
-		return ret;
-
-	ret = devm_add_action_or_reset(&spi->dev, ad7768_clk_disable, st);
-	if (ret)
-		return ret;
-
 	st->mclk_freq = clk_get_rate(st->mclk);
 
 	mutex_init(&st->lock);
diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
index edad1f30121d..9d6bf6d0927a 100644
--- a/drivers/iio/adc/ad7923.c
+++ b/drivers/iio/adc/ad7923.c
@@ -8,6 +8,7 @@
 
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/spi/spi.h>
@@ -93,6 +94,7 @@ enum ad7923_id {
 			.sign = 'u',					\
 			.realbits = (bits),				\
 			.storagebits = 16,				\
+			.shift = 12 - (bits),				\
 			.endianness = IIO_BE,				\
 		},							\
 	}
@@ -268,7 +270,8 @@ static int ad7923_read_raw(struct iio_dev *indio_dev,
 			return ret;
 
 		if (chan->address == EXTRACT(ret, 12, 4))
-			*val = EXTRACT(ret, 0, 12);
+			*val = EXTRACT(ret, chan->scan_type.shift,
+				       chan->scan_type.realbits);
 		else
 			return -EIO;
 
@@ -298,6 +301,7 @@ static void ad7923_regulator_disable(void *data)
 
 static int ad7923_probe(struct spi_device *spi)
 {
+	u32 ad7923_range = AD7923_RANGE;
 	struct ad7923_state *st;
 	struct iio_dev *indio_dev;
 	const struct ad7923_chip_info *info;
@@ -309,8 +313,11 @@ static int ad7923_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 
+	if (device_property_read_bool(&spi->dev, "adi,range-double"))
+		ad7923_range = 0;
+
 	st->spi = spi;
-	st->settings = AD7923_CODING | AD7923_RANGE |
+	st->settings = AD7923_CODING | ad7923_range |
 			AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS);
 
 	info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data];
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
index 5a5f33f7bc8f..7534572f7475 100644
--- a/drivers/iio/adc/ad9467.c
+++ b/drivers/iio/adc/ad9467.c
@@ -378,13 +378,6 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
 	return ad9467_outputmode_set(st->spi, st->output_mode);
 }
 
-static void ad9467_clk_disable(void *data)
-{
-	struct ad9467_state *st = data;
-
-	clk_disable_unprepare(st->clk);
-}
-
 static int ad9467_probe(struct spi_device *spi)
 {
 	const struct ad9467_chip_info *info;
@@ -404,18 +397,10 @@ static int ad9467_probe(struct spi_device *spi)
 	st = adi_axi_adc_conv_priv(conv);
 	st->spi = spi;
 
-	st->clk = devm_clk_get(&spi->dev, "adc-clk");
+	st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
 	if (IS_ERR(st->clk))
 		return PTR_ERR(st->clk);
 
-	ret = clk_prepare_enable(st->clk);
-	if (ret < 0)
-		return ret;
-
-	ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st);
-	if (ret)
-		return ret;
-
 	st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
 						   GPIOD_OUT_LOW);
 	if (IS_ERR(st->pwrdown_gpio))
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 279430c1d88c..4294d6539cdb 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -16,9 +16,11 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/sched.h>
+#include <linux/units.h>
 #include <linux/wait.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -26,9 +28,13 @@
 #include <linux/iio/trigger.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
 struct at91_adc_reg_layout {
 /* Control Register */
 	u16				CR;
@@ -73,11 +79,14 @@ struct at91_adc_reg_layout {
 /* Startup Time */
 #define	AT91_SAMA5D2_MR_STARTUP(v)	((v) << 16)
 #define AT91_SAMA5D2_MR_STARTUP_MASK	GENMASK(19, 16)
+/* Minimum startup time for temperature sensor */
+#define AT91_SAMA5D2_MR_STARTUP_TS_MIN	(50)
 /* Analog Change */
 #define	AT91_SAMA5D2_MR_ANACH		BIT(23)
 /* Tracking Time */
 #define	AT91_SAMA5D2_MR_TRACKTIM(v)	((v) << 24)
-#define	AT91_SAMA5D2_MR_TRACKTIM_MAX	0xff
+#define	AT91_SAMA5D2_MR_TRACKTIM_TS	6
+#define	AT91_SAMA5D2_MR_TRACKTIM_MAX	0xf
 /* Transfer Time */
 #define	AT91_SAMA5D2_MR_TRANSFER(v)	((v) << 28)
 #define	AT91_SAMA5D2_MR_TRANSFER_MAX	0x3
@@ -138,11 +147,19 @@ struct at91_adc_reg_layout {
 /* Extended Mode Register */
 	u16				EMR;
 /* Extended Mode Register - Oversampling rate */
-#define AT91_SAMA5D2_EMR_OSR(V)			((V) << 16)
-#define AT91_SAMA5D2_EMR_OSR_MASK		GENMASK(17, 16)
+#define AT91_SAMA5D2_EMR_OSR(V, M)		(((V) << 16) & (M))
 #define AT91_SAMA5D2_EMR_OSR_1SAMPLES		0
 #define AT91_SAMA5D2_EMR_OSR_4SAMPLES		1
 #define AT91_SAMA5D2_EMR_OSR_16SAMPLES		2
+#define AT91_SAMA5D2_EMR_OSR_64SAMPLES		3
+#define AT91_SAMA5D2_EMR_OSR_256SAMPLES		4
+
+/* Extended Mode Register - TRACKX */
+#define AT91_SAMA5D2_TRACKX_MASK		GENMASK(23, 22)
+#define AT91_SAMA5D2_TRACKX(x)			(((x) << 22) & \
+						 AT91_SAMA5D2_TRACKX_MASK)
+/* TRACKX for temperature sensor. */
+#define AT91_SAMA5D2_TRACKX_TS			(1)
 
 /* Extended Mode Register - Averaging on single trigger event */
 #define AT91_SAMA5D2_EMR_ASTE(V)		((V) << 20)
@@ -159,6 +176,8 @@ struct at91_adc_reg_layout {
 	u16				ACR;
 /* Analog Control Register - Pen detect sensitivity mask */
 #define AT91_SAMA5D2_ACR_PENDETSENS_MASK        GENMASK(1, 0)
+/* Analog Control Register - Source last channel */
+#define AT91_SAMA5D2_ACR_SRCLCH		BIT(16)
 
 /* Touchscreen Mode Register */
 	u16				TSMR;
@@ -226,6 +245,10 @@ struct at91_adc_reg_layout {
 	u16				WPSR;
 /* Version Register */
 	u16				VERSION;
+/* Temperature Sensor Mode Register */
+	u16				TEMPMR;
+/* Temperature Sensor Mode - Temperature sensor on */
+#define AT91_SAMA5D2_TEMPMR_TEMPON	BIT(0)
 };
 
 static const struct at91_adc_reg_layout sama5d2_layout = {
@@ -280,6 +303,7 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
 	.EOC_IDR =		0x38,
 	.EOC_IMR =		0x3c,
 	.EOC_ISR =		0x40,
+	.TEMPMR =		0x44,
 	.OVER =			0x4c,
 	.EMR =			0x50,
 	.CWR =			0x54,
@@ -305,11 +329,6 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
 #define AT91_HWFIFO_MAX_SIZE_STR	"128"
 #define AT91_HWFIFO_MAX_SIZE		128
 
-/* Possible values for oversampling ratio */
-#define AT91_OSR_1SAMPLES		1
-#define AT91_OSR_4SAMPLES		4
-#define AT91_OSR_16SAMPLES		16
-
 #define AT91_SAMA5D2_CHAN_SINGLE(index, num, addr)			\
 	{								\
 		.type = IIO_VOLTAGE,					\
@@ -325,6 +344,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
 				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.info_mask_shared_by_all_available =			\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = "CH"#num,				\
 		.indexed = 1,						\
 	}
@@ -346,6 +367,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
 				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.info_mask_shared_by_all_available =			\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = "CH"#num"-CH"#num2,			\
 		.indexed = 1,						\
 	}
@@ -365,6 +388,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
 				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.info_mask_shared_by_all_available =			\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = name,					\
 	}
 #define AT91_SAMA5D2_CHAN_PRESSURE(num, name)				\
@@ -380,6 +405,23 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
 				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.info_mask_shared_by_all_available =			\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.datasheet_name = name,					\
+	}
+
+#define AT91_SAMA5D2_CHAN_TEMP(num, name, addr)				\
+	{								\
+		.type = IIO_TEMP,					\
+		.channel = num,						\
+		.address =  addr,					\
+		.scan_index = num,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),	\
+		.info_mask_shared_by_all =				\
+				BIT(IIO_CHAN_INFO_PROCESSED) |		\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.info_mask_shared_by_all_available =			\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = name,					\
 	}
 
@@ -403,6 +445,12 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
  * @max_index:		highest channel index (highest index may be higher
  *			than the total channel number)
  * @hw_trig_cnt:	number of possible hardware triggers
+ * @osr_mask:		oversampling ratio bitmask on EMR register
+ * @oversampling_avail:	available oversampling values
+ * @oversampling_avail_no: number of available oversampling values
+ * @chan_realbits:	realbits for registered channels
+ * @temp_chan:		temperature channel index
+ * @temp_sensor:	temperature sensor supported
  */
 struct at91_adc_platform {
 	const struct at91_adc_reg_layout	*layout;
@@ -414,20 +462,58 @@ struct at91_adc_platform {
 	unsigned int				max_channels;
 	unsigned int				max_index;
 	unsigned int				hw_trig_cnt;
+	unsigned int				osr_mask;
+	unsigned int				oversampling_avail[5];
+	unsigned int				oversampling_avail_no;
+	unsigned int				chan_realbits;
+	unsigned int				temp_chan;
+	bool					temp_sensor;
+};
+
+/**
+ * struct at91_adc_temp_sensor_clb - at91-sama5d2 temperature sensor
+ * calibration data structure
+ * @p1: P1 calibration temperature
+ * @p4: P4 calibration voltage
+ * @p6: P6 calibration voltage
+ */
+struct at91_adc_temp_sensor_clb {
+	u32 p1;
+	u32 p4;
+	u32 p6;
+};
+
+/**
+ * enum at91_adc_ts_clb_idx - calibration indexes in NVMEM buffer
+ * @AT91_ADC_TS_CLB_IDX_P1: index for P1
+ * @AT91_ADC_TS_CLB_IDX_P4: index for P4
+ * @AT91_ADC_TS_CLB_IDX_P6: index for P6
+ * @AT91_ADC_TS_CLB_IDX_MAX: max index for temperature calibration packet in OTP
+ */
+enum at91_adc_ts_clb_idx {
+	AT91_ADC_TS_CLB_IDX_P1 = 2,
+	AT91_ADC_TS_CLB_IDX_P4 = 5,
+	AT91_ADC_TS_CLB_IDX_P6 = 7,
+	AT91_ADC_TS_CLB_IDX_MAX = 19,
 };
 
+/* Temperature sensor calibration - Vtemp voltage sensitivity to temperature. */
+#define AT91_ADC_TS_VTEMP_DT		(2080U)
+
 /**
  * struct at91_adc_soc_info - at91-sama5d2 soc information struct
  * @startup_time:	device startup time
  * @min_sample_rate:	minimum sample rate in Hz
  * @max_sample_rate:	maximum sample rate in Hz
  * @platform:		pointer to the platform structure
+ * @temp_sensor_clb:	temperature sensor calibration data structure
  */
 struct at91_adc_soc_info {
 	unsigned			startup_time;
 	unsigned			min_sample_rate;
 	unsigned			max_sample_rate;
 	const struct at91_adc_platform	*platform;
+	struct at91_adc_temp_sensor_clb	temp_sensor_clb;
 };
 
 struct at91_adc_trigger {
@@ -475,6 +561,18 @@ struct at91_adc_touch {
 	struct work_struct		workq;
 };
 
+/**
+ * struct at91_adc_temp - at91-sama5d2 temperature information structure
+ * @sample_period_val:	sample period value
+ * @saved_sample_rate:	saved sample rate
+ * @saved_oversampling:	saved oversampling
+ */
+struct at91_adc_temp {
+	u16				sample_period_val;
+	u16				saved_sample_rate;
+	u16				saved_oversampling;
+};
+
 /*
  * Buffer size requirements:
  * No channels * bytes_per_channel(2) + timestamp bytes (8)
@@ -502,7 +600,9 @@ struct at91_adc_state {
 	wait_queue_head_t		wq_data_available;
 	struct at91_adc_dma		dma_st;
 	struct at91_adc_touch		touch_st;
+	struct at91_adc_temp		temp_st;
 	struct iio_dev			*indio_dev;
+	struct device			*dev;
 	/* Ensure naturally aligned timestamp */
 	u16				buffer[AT91_BUFFER_MAX_HWORDS] __aligned(8);
 	/*
@@ -591,6 +691,7 @@ static const struct iio_chan_spec at91_sama7g5_adc_channels[] = {
 	AT91_SAMA5D2_CHAN_DIFF(22, 12, 13, 0x90),
 	AT91_SAMA5D2_CHAN_DIFF(23, 14, 15, 0x98),
 	IIO_CHAN_SOFT_TIMESTAMP(24),
+	AT91_SAMA5D2_CHAN_TEMP(AT91_SAMA7G5_ADC_TEMP_CHANNEL, "temp", 0xdc),
 };
 
 static const struct at91_adc_platform sama5d2_platform = {
@@ -612,6 +713,10 @@ static const struct at91_adc_platform sama5d2_platform = {
 	.max_index = AT91_SAMA5D2_MAX_CHAN_IDX,
 #define AT91_SAMA5D2_HW_TRIG_CNT	3
 	.hw_trig_cnt = AT91_SAMA5D2_HW_TRIG_CNT,
+	.osr_mask = GENMASK(17, 16),
+	.oversampling_avail = { 1, 4, 16, },
+	.oversampling_avail_no = 3,
+	.chan_realbits = 14,
 };
 
 static const struct at91_adc_platform sama7g5_platform = {
@@ -619,14 +724,23 @@ static const struct at91_adc_platform sama7g5_platform = {
 	.adc_channels = &at91_sama7g5_adc_channels,
 #define AT91_SAMA7G5_SINGLE_CHAN_CNT	16
 #define AT91_SAMA7G5_DIFF_CHAN_CNT	8
+#define AT91_SAMA7G5_TEMP_CHAN_CNT	1
 	.nr_channels = AT91_SAMA7G5_SINGLE_CHAN_CNT +
-		       AT91_SAMA7G5_DIFF_CHAN_CNT,
+		       AT91_SAMA7G5_DIFF_CHAN_CNT +
+		       AT91_SAMA7G5_TEMP_CHAN_CNT,
 #define AT91_SAMA7G5_MAX_CHAN_IDX	(AT91_SAMA7G5_SINGLE_CHAN_CNT + \
-					AT91_SAMA7G5_DIFF_CHAN_CNT)
+					AT91_SAMA7G5_DIFF_CHAN_CNT + \
+					AT91_SAMA7G5_TEMP_CHAN_CNT)
 	.max_channels = ARRAY_SIZE(at91_sama7g5_adc_channels),
 	.max_index = AT91_SAMA7G5_MAX_CHAN_IDX,
 #define AT91_SAMA7G5_HW_TRIG_CNT	3
 	.hw_trig_cnt = AT91_SAMA7G5_HW_TRIG_CNT,
+	.osr_mask = GENMASK(18, 16),
+	.oversampling_avail = { 1, 4, 16, 64, 256, },
+	.oversampling_avail_no = 5,
+	.chan_realbits = 16,
+	.temp_sensor = true,
+	.temp_chan = AT91_SAMA7G5_ADC_TEMP_CHANNEL,
 };
 
 static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
@@ -650,8 +764,8 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan)
 	return indio_dev->channels + index;
 }
 
-static inline int at91_adc_of_xlate(struct iio_dev *indio_dev,
-				    const struct of_phandle_args *iiospec)
+static inline int at91_adc_fwnode_xlate(struct iio_dev *indio_dev,
+					const struct fwnode_reference_args *iiospec)
 {
 	return at91_adc_chan_xlate(indio_dev, iiospec->args[0]);
 }
@@ -725,51 +839,91 @@ static void at91_adc_eoc_ena(struct at91_adc_state *st, unsigned int channel)
 		at91_adc_writel(st, EOC_IER, BIT(channel));
 }
 
-static void at91_adc_config_emr(struct at91_adc_state *st)
+static int at91_adc_config_emr(struct at91_adc_state *st,
+			       u32 oversampling_ratio, u32 trackx)
 {
 	/* configure the extended mode register */
-	unsigned int emr = at91_adc_readl(st, EMR);
-
-	/* select oversampling per single trigger event */
-	emr |= AT91_SAMA5D2_EMR_ASTE(1);
+	unsigned int emr, osr;
+	unsigned int osr_mask = st->soc_info.platform->osr_mask;
+	int i, ret;
 
-	/* delete leftover content if it's the case */
-	emr &= ~AT91_SAMA5D2_EMR_OSR_MASK;
+	/* Check against supported oversampling values. */
+	for (i = 0; i < st->soc_info.platform->oversampling_avail_no; i++) {
+		if (oversampling_ratio == st->soc_info.platform->oversampling_avail[i])
+			break;
+	}
+	if (i == st->soc_info.platform->oversampling_avail_no)
+		return -EINVAL;
 
 	/* select oversampling ratio from configuration */
-	switch (st->oversampling_ratio) {
-	case AT91_OSR_1SAMPLES:
-		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) &
-		       AT91_SAMA5D2_EMR_OSR_MASK;
+	switch (oversampling_ratio) {
+	case 1:
+		osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES,
+					   osr_mask);
 		break;
-	case AT91_OSR_4SAMPLES:
-		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) &
-		       AT91_SAMA5D2_EMR_OSR_MASK;
+	case 4:
+		osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES,
+					   osr_mask);
 		break;
-	case AT91_OSR_16SAMPLES:
-		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) &
-		       AT91_SAMA5D2_EMR_OSR_MASK;
+	case 16:
+		osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES,
+					   osr_mask);
+		break;
+	case 64:
+		osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_64SAMPLES,
+					   osr_mask);
+		break;
+	case 256:
+		osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_256SAMPLES,
+					   osr_mask);
 		break;
 	}
 
+	ret = pm_runtime_resume_and_get(st->dev);
+	if (ret < 0)
+		return ret;
+
+	emr = at91_adc_readl(st, EMR);
+	/* select oversampling per single trigger event */
+	emr |= AT91_SAMA5D2_EMR_ASTE(1);
+	/* delete leftover content if it's the case */
+	emr &= ~(osr_mask | AT91_SAMA5D2_TRACKX_MASK);
+	/* Update osr and trackx. */
+	emr |= osr | AT91_SAMA5D2_TRACKX(trackx);
 	at91_adc_writel(st, EMR, emr);
+
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
+
+	st->oversampling_ratio = oversampling_ratio;
+
+	return 0;
 }
 
 static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val)
 {
-	if (st->oversampling_ratio == AT91_OSR_1SAMPLES) {
-		/*
-		 * in this case we only have 12 bits of real data, but channel
-		 * is registered as 14 bits, so shift left two bits
-		 */
-		*val <<= 2;
-	} else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) {
-		/*
-		 * in this case we have 13 bits of real data, but channel
-		 * is registered as 14 bits, so left shift one bit
-		 */
-		*val <<= 1;
-	}
+	int nbits, diff;
+
+	if (st->oversampling_ratio == 1)
+		nbits = 12;
+	else if (st->oversampling_ratio == 4)
+		nbits = 13;
+	else if (st->oversampling_ratio == 16)
+		nbits = 14;
+	else if (st->oversampling_ratio == 64)
+		nbits = 15;
+	else if (st->oversampling_ratio == 256)
+		nbits = 16;
+	else
+		/* Should not happen. */
+		return -EINVAL;
+
+	/*
+	 * We have nbits of real data and channel is registered as
+	 * st->soc_info.platform->chan_realbits, so shift left diff bits.
+	 */
+	diff = st->soc_info.platform->chan_realbits - nbits;
+	*val <<= diff;
 
 	return IIO_VAL_INT;
 }
@@ -799,15 +953,22 @@ static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf,
 static int at91_adc_configure_touch(struct at91_adc_state *st, bool state)
 {
 	u32 clk_khz = st->current_sample_rate / 1000;
-	int i = 0;
+	int i = 0, ret;
 	u16 pendbc;
 	u32 tsmr, acr;
 
-	if (!state) {
+	if (state) {
+		ret = pm_runtime_resume_and_get(st->dev);
+		if (ret < 0)
+			return ret;
+	} else {
 		/* disabling touch IRQs and setting mode to no touch enabled */
 		at91_adc_writel(st, IDR,
 				AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN);
 		at91_adc_writel(st, TSMR, 0);
+
+		pm_runtime_mark_last_busy(st->dev);
+		pm_runtime_put_autosuspend(st->dev);
 		return 0;
 	}
 	/*
@@ -948,10 +1109,9 @@ static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val)
 	return IIO_VAL_INT;
 }
 
-static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
+static void at91_adc_configure_trigger_registers(struct at91_adc_state *st,
+						 bool state)
 {
-	struct iio_dev *indio = iio_trigger_get_drvdata(trig);
-	struct at91_adc_state *st = iio_priv(indio);
 	u32 status = at91_adc_readl(st, TRGR);
 
 	/* clear TRGMOD */
@@ -962,6 +1122,26 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 
 	/* set/unset hw trigger */
 	at91_adc_writel(st, TRGR, status);
+}
+
+static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio = iio_trigger_get_drvdata(trig);
+	struct at91_adc_state *st = iio_priv(indio);
+	int ret;
+
+	if (state) {
+		ret = pm_runtime_resume_and_get(st->dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	at91_adc_configure_trigger_registers(st, state);
+
+	if (!state) {
+		pm_runtime_mark_last_busy(st->dev);
+		pm_runtime_put_autosuspend(st->dev);
+	}
 
 	return 0;
 }
@@ -1120,11 +1300,15 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev)
 	if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES))
 		return -EINVAL;
 
+	ret = pm_runtime_resume_and_get(st->dev);
+	if (ret < 0)
+		return ret;
+
 	/* we continue with the triggered buffer */
 	ret = at91_adc_dma_start(indio_dev);
 	if (ret) {
 		dev_err(&indio_dev->dev, "buffer prepare failed\n");
-		return ret;
+		goto pm_runtime_put;
 	}
 
 	for_each_set_bit(bit, indio_dev->active_scan_mask,
@@ -1135,7 +1319,8 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev)
 			continue;
 		/* these channel types cannot be handled by this trigger */
 		if (chan->type == IIO_POSITIONRELATIVE ||
-		    chan->type == IIO_PRESSURE)
+		    chan->type == IIO_PRESSURE ||
+		    chan->type == IIO_TEMP)
 			continue;
 
 		at91_adc_cor(st, chan);
@@ -1146,12 +1331,16 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev)
 	if (at91_adc_buffer_check_use_irq(indio_dev, st))
 		at91_adc_writel(st, IER, AT91_SAMA5D2_IER_DRDY);
 
-	return 0;
+pm_runtime_put:
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
+	return ret;
 }
 
 static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
+	int ret;
 	u8 bit;
 
 	/* check if we are disabling triggered buffer or the touchscreen */
@@ -1162,6 +1351,10 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
 	if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES))
 		return -EINVAL;
 
+	ret = pm_runtime_resume_and_get(st->dev);
+	if (ret < 0)
+		return ret;
+
 	/*
 	 * For each enable channel we must disable it in hardware.
 	 * In the case of DMA, we must read the last converted value
@@ -1177,7 +1370,8 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
 			continue;
 		/* these channel types are virtual, no need to do anything */
 		if (chan->type == IIO_POSITIONRELATIVE ||
-		    chan->type == IIO_PRESSURE)
+		    chan->type == IIO_PRESSURE ||
+		    chan->type == IIO_TEMP)
 			continue;
 
 		at91_adc_writel(st, CHDR, BIT(chan->channel));
@@ -1196,6 +1390,9 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
 	if (st->dma_st.dma_chan)
 		dmaengine_terminate_sync(st->dma_st.dma_chan);
 
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
+
 	return 0;
 }
 
@@ -1224,6 +1421,7 @@ static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio,
 
 	return trig;
 }
+
 static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
 					   struct iio_poll_func *pf)
 {
@@ -1377,25 +1575,35 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min,
 	return i;
 }
 
-static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq)
+static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq,
+				     unsigned int startup_time,
+				     unsigned int tracktim)
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	unsigned f_per, prescal, startup, mr;
+	int ret;
 
 	f_per = clk_get_rate(st->per_clk);
 	prescal = (f_per / (2 * freq)) - 1;
 
-	startup = at91_adc_startup_time(st->soc_info.startup_time,
-					freq / 1000);
+	startup = at91_adc_startup_time(startup_time, freq / 1000);
+
+	ret = pm_runtime_resume_and_get(st->dev);
+	if (ret < 0)
+		return;
 
 	mr = at91_adc_readl(st, MR);
 	mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK);
 	mr |= AT91_SAMA5D2_MR_STARTUP(startup);
 	mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
+	mr |= AT91_SAMA5D2_MR_TRACKTIM(tracktim);
 	at91_adc_writel(st, MR, mr);
 
-	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
-		freq, startup, prescal);
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
+
+	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u, tracktim=%u\n",
+		freq, startup, prescal, tracktim);
 	st->current_sample_rate = freq;
 }
 
@@ -1522,6 +1730,7 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
+/* This needs to be called with direct mode claimed and st->lock locked. */
 static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 				  struct iio_chan_spec const *chan, int *val)
 {
@@ -1529,50 +1738,46 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 	u16 tmp_val;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(st->dev);
+	if (ret < 0)
+		return ret;
+
 	/*
 	 * Keep in mind that we cannot use software trigger or touchscreen
 	 * if external trigger is enabled
 	 */
 	if (chan->type == IIO_POSITIONRELATIVE) {
-		ret = iio_device_claim_direct_mode(indio_dev);
-		if (ret)
-			return ret;
-		mutex_lock(&st->lock);
-
 		ret = at91_adc_read_position(st, chan->channel,
 					     &tmp_val);
 		*val = tmp_val;
-		mutex_unlock(&st->lock);
-		iio_device_release_direct_mode(indio_dev);
+		if (ret > 0)
+			ret = at91_adc_adjust_val_osr(st, val);
 
-		return at91_adc_adjust_val_osr(st, val);
+		goto pm_runtime_put;
 	}
 	if (chan->type == IIO_PRESSURE) {
-		ret = iio_device_claim_direct_mode(indio_dev);
-		if (ret)
-			return ret;
-		mutex_lock(&st->lock);
-
 		ret = at91_adc_read_pressure(st, chan->channel,
 					     &tmp_val);
 		*val = tmp_val;
-		mutex_unlock(&st->lock);
-		iio_device_release_direct_mode(indio_dev);
+		if (ret > 0)
+			ret = at91_adc_adjust_val_osr(st, val);
 
-		return at91_adc_adjust_val_osr(st, val);
+		goto pm_runtime_put;
 	}
 
-	/* in this case we have a voltage channel */
-
-	ret = iio_device_claim_direct_mode(indio_dev);
-	if (ret)
-		return ret;
-	mutex_lock(&st->lock);
+	/* in this case we have a voltage or temperature channel */
 
 	st->chan = chan;
 
 	at91_adc_cor(st, chan);
 	at91_adc_writel(st, CHER, BIT(chan->channel));
+	/*
+	 * TEMPMR.TEMPON needs to update after CHER otherwise if none
+	 * of the channels are enabled and TEMPMR.TEMPON = 1 will
+	 * trigger DRDY interruption while preparing for temperature read.
+	 */
+	if (chan->type == IIO_TEMP)
+		at91_adc_writel(st, TEMPMR, AT91_SAMA5D2_TEMPMR_TEMPON);
 	at91_adc_eoc_ena(st, chan->channel);
 	at91_adc_writel(st, CR, AT91_SAMA5D2_CR_START);
 
@@ -1592,14 +1797,125 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 	}
 
 	at91_adc_eoc_dis(st, st->chan->channel);
+	if (chan->type == IIO_TEMP)
+		at91_adc_writel(st, TEMPMR, 0U);
 	at91_adc_writel(st, CHDR, BIT(chan->channel));
 
 	/* Needed to ACK the DRDY interruption */
 	at91_adc_readl(st, LCDR);
 
+pm_runtime_put:
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
+	return ret;
+}
+
+static int at91_adc_read_info_locked(struct iio_dev *indio_dev,
+				     struct iio_chan_spec const *chan, int *val)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	mutex_lock(&st->lock);
+	ret = at91_adc_read_info_raw(indio_dev, chan, val);
 	mutex_unlock(&st->lock);
 
 	iio_device_release_direct_mode(indio_dev);
+
+	return ret;
+}
+
+static void at91_adc_temp_sensor_configure(struct at91_adc_state *st,
+					   bool start)
+{
+	u32 sample_rate, oversampling_ratio;
+	u32 startup_time, tracktim, trackx;
+
+	if (start) {
+		/*
+		 * Configure the sensor for best accuracy: 10MHz frequency,
+		 * oversampling rate of 256, tracktim=0xf and trackx=1.
+		 */
+		sample_rate = 10 * MEGA;
+		oversampling_ratio = 256;
+		startup_time = AT91_SAMA5D2_MR_STARTUP_TS_MIN;
+		tracktim = AT91_SAMA5D2_MR_TRACKTIM_TS;
+		trackx = AT91_SAMA5D2_TRACKX_TS;
+
+		st->temp_st.saved_sample_rate = st->current_sample_rate;
+		st->temp_st.saved_oversampling = st->oversampling_ratio;
+	} else {
+		/* Go back to previous settings. */
+		sample_rate = st->temp_st.saved_sample_rate;
+		oversampling_ratio = st->temp_st.saved_oversampling;
+		startup_time = st->soc_info.startup_time;
+		tracktim = 0;
+		trackx = 0;
+	}
+
+	at91_adc_setup_samp_freq(st->indio_dev, sample_rate, startup_time,
+				 tracktim);
+	at91_adc_config_emr(st, oversampling_ratio, trackx);
+}
+
+static int at91_adc_read_temp(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan, int *val)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+	struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb;
+	u64 div1, div2;
+	u32 tmp;
+	int ret, vbg, vtemp;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+	mutex_lock(&st->lock);
+
+	ret = pm_runtime_resume_and_get(st->dev);
+	if (ret < 0)
+		goto unlock;
+
+	at91_adc_temp_sensor_configure(st, true);
+
+	/* Read VBG. */
+	tmp = at91_adc_readl(st, ACR);
+	tmp |= AT91_SAMA5D2_ACR_SRCLCH;
+	at91_adc_writel(st, ACR, tmp);
+	ret = at91_adc_read_info_raw(indio_dev, chan, &vbg);
+	if (ret < 0)
+		goto restore_config;
+
+	/* Read VTEMP. */
+	tmp &= ~AT91_SAMA5D2_ACR_SRCLCH;
+	at91_adc_writel(st, ACR, tmp);
+	ret = at91_adc_read_info_raw(indio_dev, chan, &vtemp);
+
+restore_config:
+	/* Revert previous settings. */
+	at91_adc_temp_sensor_configure(st, false);
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
+unlock:
+	mutex_unlock(&st->lock);
+	iio_device_release_direct_mode(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Temp[milli] = p1[milli] + (vtemp * clb->p6 - clb->p4 * vbg)/
+	 *			     (vbg * AT91_ADC_TS_VTEMP_DT)
+	 */
+	div1 = DIV_ROUND_CLOSEST_ULL(((u64)vtemp * clb->p6), vbg);
+	div1 = DIV_ROUND_CLOSEST_ULL((div1 * 1000), AT91_ADC_TS_VTEMP_DT);
+	div2 = DIV_ROUND_CLOSEST_ULL((u64)clb->p4, AT91_ADC_TS_VTEMP_DT);
+	div2 *= 1000;
+	*val = clb->p1 + (int)div1 - (int)div2;
+
 	return ret;
 }
 
@@ -1611,7 +1927,8 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		return at91_adc_read_info_raw(indio_dev, chan, val);
+		return at91_adc_read_info_locked(indio_dev, chan, val);
+
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_uv / 1000;
 		if (chan->differential)
@@ -1619,6 +1936,11 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 		*val2 = chan->scan_type.realbits;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
+	case IIO_CHAN_INFO_PROCESSED:
+		if (chan->type != IIO_TEMP)
+			return -EINVAL;
+		return at91_adc_read_temp(indio_dev, chan, val);
+
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*val = at91_adc_get_sample_freq(st);
 		return IIO_VAL_INT;
@@ -1637,31 +1959,60 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
 			      int val, int val2, long mask)
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
+	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
-		if ((val != AT91_OSR_1SAMPLES) && (val != AT91_OSR_4SAMPLES) &&
-		    (val != AT91_OSR_16SAMPLES))
-			return -EINVAL;
 		/* if no change, optimize out */
 		if (val == st->oversampling_ratio)
 			return 0;
-		st->oversampling_ratio = val;
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		mutex_lock(&st->lock);
 		/* update ratio */
-		at91_adc_config_emr(st);
-		return 0;
+		ret = at91_adc_config_emr(st, val, 0);
+		mutex_unlock(&st->lock);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		if (val < st->soc_info.min_sample_rate ||
 		    val > st->soc_info.max_sample_rate)
 			return -EINVAL;
 
-		at91_adc_setup_samp_freq(indio_dev, val);
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		mutex_lock(&st->lock);
+		at91_adc_setup_samp_freq(indio_dev, val,
+					 st->soc_info.startup_time, 0);
+		mutex_unlock(&st->lock);
+		iio_device_release_direct_mode(indio_dev);
 		return 0;
 	default:
 		return -EINVAL;
 	}
 }
 
+static int at91_adc_read_avail(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length,
+			       long mask)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*vals = (int *)st->soc_info.platform->oversampling_avail;
+		*type = IIO_VAL_INT;
+		*length = st->soc_info.platform->oversampling_avail_no;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
 static void at91_adc_dma_init(struct at91_adc_state *st)
 {
 	struct device *dev = &st->indio_dev->dev;
@@ -1817,10 +2168,11 @@ static void at91_adc_hw_init(struct iio_dev *indio_dev)
 	at91_adc_writel(st, MR,
 			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
 
-	at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate);
+	at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate,
+				 st->soc_info.startup_time, 0);
 
 	/* configure extended mode register */
-	at91_adc_config_emr(st);
+	at91_adc_config_emr(st, st->oversampling_ratio, 0);
 }
 
 static ssize_t at91_adc_get_fifo_state(struct device *dev,
@@ -1849,20 +2201,6 @@ static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
 static IIO_CONST_ATTR(hwfifo_watermark_min, "2");
 static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR);
 
-static IIO_CONST_ATTR(oversampling_ratio_available,
-		      __stringify(AT91_OSR_1SAMPLES) " "
-		      __stringify(AT91_OSR_4SAMPLES) " "
-		      __stringify(AT91_OSR_16SAMPLES));
-
-static struct attribute *at91_adc_attributes[] = {
-	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group at91_adc_attribute_group = {
-	.attrs = at91_adc_attributes,
-};
-
 static const struct attribute *at91_adc_fifo_attributes[] = {
 	&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
 	&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
@@ -1872,11 +2210,11 @@ static const struct attribute *at91_adc_fifo_attributes[] = {
 };
 
 static const struct iio_info at91_adc_info = {
-	.attrs = &at91_adc_attribute_group,
+	.read_avail = &at91_adc_read_avail,
 	.read_raw = &at91_adc_read_raw,
 	.write_raw = &at91_adc_write_raw,
 	.update_scan_mode = &at91_adc_update_scan_mode,
-	.of_xlate = &at91_adc_of_xlate,
+	.fwnode_xlate = &at91_adc_fwnode_xlate,
 	.hwfifo_set_watermark = &at91_adc_set_watermark,
 };
 
@@ -1918,12 +2256,62 @@ static int at91_adc_buffer_and_trigger_init(struct device *dev,
 	return 0;
 }
 
+static int at91_adc_temp_sensor_init(struct at91_adc_state *st,
+				     struct device *dev)
+{
+	struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb;
+	struct nvmem_cell *temp_calib;
+	u32 *buf;
+	size_t len;
+	int ret = 0;
+
+	if (!st->soc_info.platform->temp_sensor)
+		return 0;
+
+	/* Get the calibration data from NVMEM. */
+	temp_calib = devm_nvmem_cell_get(dev, "temperature_calib");
+	if (IS_ERR(temp_calib)) {
+		ret = PTR_ERR(temp_calib);
+		if (ret != -ENOENT)
+			dev_err(dev, "Failed to get temperature_calib cell!\n");
+		return ret;
+	}
+
+	buf = nvmem_cell_read(temp_calib, &len);
+	if (IS_ERR(buf)) {
+		dev_err(dev, "Failed to read calibration data!\n");
+		return PTR_ERR(buf);
+	}
+	if (len < AT91_ADC_TS_CLB_IDX_MAX * 4) {
+		dev_err(dev, "Invalid calibration data!\n");
+		ret = -EINVAL;
+		goto free_buf;
+	}
+
+	/* Store calibration data for later use. */
+	clb->p1 = buf[AT91_ADC_TS_CLB_IDX_P1];
+	clb->p4 = buf[AT91_ADC_TS_CLB_IDX_P4];
+	clb->p6 = buf[AT91_ADC_TS_CLB_IDX_P6];
+
+	/*
+	 * We prepare here the conversion to milli and also add constant
+	 * factor (5 degrees Celsius) to p1 here to avoid doing it on
+	 * hotpath.
+	 */
+	clb->p1 = clb->p1 * 1000 + 5000;
+
+free_buf:
+	kfree(buf);
+	return ret;
+}
+
 static int at91_adc_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	struct at91_adc_state *st;
 	struct resource	*res;
-	int ret, i;
+	int ret, i, num_channels;
 	u32 edge_type = IRQ_TYPE_NONE;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
@@ -1933,13 +2321,20 @@ static int at91_adc_probe(struct platform_device *pdev)
 	st = iio_priv(indio_dev);
 	st->indio_dev = indio_dev;
 
-	st->soc_info.platform = of_device_get_match_data(&pdev->dev);
+	st->soc_info.platform = device_get_match_data(dev);
+
+	ret = at91_adc_temp_sensor_init(st, &pdev->dev);
+	/* Don't register temperature channel if initialization failed. */
+	if (ret)
+		num_channels = st->soc_info.platform->max_channels - 1;
+	else
+		num_channels = st->soc_info.platform->max_channels;
 
 	indio_dev->name = dev_name(&pdev->dev);
 	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
 	indio_dev->info = &at91_adc_info;
 	indio_dev->channels = *st->soc_info.platform->adc_channels;
-	indio_dev->num_channels = st->soc_info.platform->max_channels;
+	indio_dev->num_channels = num_channels;
 
 	bitmap_set(&st->touch_st.channels_bitmask,
 		   st->soc_info.platform->touch_chan_x, 1);
@@ -1948,36 +2343,34 @@ static int at91_adc_probe(struct platform_device *pdev)
 	bitmap_set(&st->touch_st.channels_bitmask,
 		   st->soc_info.platform->touch_chan_p, 1);
 
-	st->oversampling_ratio = AT91_OSR_1SAMPLES;
+	st->oversampling_ratio = 1;
 
-	ret = of_property_read_u32(pdev->dev.of_node,
-				   "atmel,min-sample-rate-hz",
-				   &st->soc_info.min_sample_rate);
+	ret = device_property_read_u32(dev, "atmel,min-sample-rate-hz",
+				       &st->soc_info.min_sample_rate);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"invalid or missing value for atmel,min-sample-rate-hz\n");
 		return ret;
 	}
 
-	ret = of_property_read_u32(pdev->dev.of_node,
-				   "atmel,max-sample-rate-hz",
-				   &st->soc_info.max_sample_rate);
+	ret = device_property_read_u32(dev, "atmel,max-sample-rate-hz",
+				       &st->soc_info.max_sample_rate);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"invalid or missing value for atmel,max-sample-rate-hz\n");
 		return ret;
 	}
 
-	ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms",
-				   &st->soc_info.startup_time);
+	ret = device_property_read_u32(dev, "atmel,startup-time-ms",
+				       &st->soc_info.startup_time);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"invalid or missing value for atmel,startup-time-ms\n");
 		return ret;
 	}
 
-	ret = of_property_read_u32(pdev->dev.of_node,
-				   "atmel,trigger-edge-type", &edge_type);
+	ret = device_property_read_u32(dev, "atmel,trigger-edge-type",
+				       &edge_type);
 	if (ret) {
 		dev_dbg(&pdev->dev,
 			"atmel,trigger-edge-type not specified, only software trigger available\n");
@@ -2051,13 +2444,19 @@ static int at91_adc_probe(struct platform_device *pdev)
 	if (ret)
 		goto vref_disable;
 
-	at91_adc_hw_init(indio_dev);
-
 	platform_set_drvdata(pdev, indio_dev);
+	st->dev = &pdev->dev;
+	pm_runtime_set_autosuspend_delay(st->dev, 500);
+	pm_runtime_use_autosuspend(st->dev);
+	pm_runtime_set_active(st->dev);
+	pm_runtime_enable(st->dev);
+	pm_runtime_get_noresume(st->dev);
+
+	at91_adc_hw_init(indio_dev);
 
 	ret = at91_adc_buffer_and_trigger_init(&pdev->dev, indio_dev);
 	if (ret < 0)
-		goto per_clk_disable_unprepare;
+		goto err_pm_disable;
 
 	if (dma_coerce_mask_and_coherent(&indio_dev->dev, DMA_BIT_MASK(32)))
 		dev_info(&pdev->dev, "cannot set DMA mask to 32-bit\n");
@@ -2073,11 +2472,18 @@ static int at91_adc_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "version: %x\n",
 		 readl_relaxed(st->base + st->soc_info.platform->layout->VERSION));
 
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
+
 	return 0;
 
 dma_disable:
 	at91_adc_dma_disable(st);
-per_clk_disable_unprepare:
+err_pm_disable:
+	pm_runtime_put_noidle(st->dev);
+	pm_runtime_disable(st->dev);
+	pm_runtime_set_suspended(st->dev);
+	pm_runtime_dont_use_autosuspend(st->dev);
 	clk_disable_unprepare(st->per_clk);
 vref_disable:
 	regulator_disable(st->vref);
@@ -2095,6 +2501,8 @@ static int at91_adc_remove(struct platform_device *pdev)
 
 	at91_adc_dma_disable(st);
 
+	pm_runtime_disable(st->dev);
+	pm_runtime_set_suspended(st->dev);
 	clk_disable_unprepare(st->per_clk);
 
 	regulator_disable(st->vref);
@@ -2107,6 +2515,14 @@ static int at91_adc_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct at91_adc_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(st->dev);
+	if (ret < 0)
+		return ret;
+
+	if (iio_buffer_enabled(indio_dev))
+		at91_adc_buffer_postdisable(indio_dev);
 
 	/*
 	 * Do a sofware reset of the ADC before we go to suspend.
@@ -2116,6 +2532,8 @@ static int at91_adc_suspend(struct device *dev)
 	 */
 	at91_adc_writel(st, CR, AT91_SAMA5D2_CR_SWRST);
 
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_noidle(st->dev);
 	clk_disable_unprepare(st->per_clk);
 	regulator_disable(st->vref);
 	regulator_disable(st->reg);
@@ -2145,21 +2563,28 @@ static int at91_adc_resume(struct device *dev)
 	if (ret)
 		goto vref_disable_resume;
 
+	pm_runtime_get_noresume(st->dev);
+
 	at91_adc_hw_init(indio_dev);
 
 	/* reconfiguring trigger hardware state */
-	if (!iio_buffer_enabled(indio_dev))
-		return 0;
+	if (iio_buffer_enabled(indio_dev)) {
+		ret = at91_adc_buffer_prepare(indio_dev);
+		if (ret)
+			goto pm_runtime_put;
 
-	/* check if we are enabling triggered buffer or the touchscreen */
-	if (at91_adc_current_chan_is_touch(indio_dev))
-		return at91_adc_configure_touch(st, true);
-	else
-		return at91_adc_configure_trigger(st->trig, true);
+		at91_adc_configure_trigger_registers(st, true);
+	}
+
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_autosuspend(st->dev);
 
-	/* not needed but more explicit */
 	return 0;
 
+pm_runtime_put:
+	pm_runtime_mark_last_busy(st->dev);
+	pm_runtime_put_noidle(st->dev);
+	clk_disable_unprepare(st->per_clk);
 vref_disable_resume:
 	regulator_disable(st->vref);
 reg_disable_resume:
@@ -2169,8 +2594,29 @@ resume_failed:
 	return ret;
 }
 
-static DEFINE_SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend,
-				at91_adc_resume);
+static int at91_adc_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	clk_disable(st->per_clk);
+
+	return 0;
+}
+
+static int at91_adc_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	return clk_enable(st->per_clk);
+}
+
+static const struct dev_pm_ops at91_adc_pm_ops = {
+	SYSTEM_SLEEP_PM_OPS(at91_adc_suspend, at91_adc_resume)
+	RUNTIME_PM_OPS(at91_adc_runtime_suspend, at91_adc_runtime_resume,
+		       NULL)
+};
 
 static const struct of_device_id at91_adc_dt_match[] = {
 	{
@@ -2191,7 +2637,7 @@ static struct platform_driver at91_adc_driver = {
 	.driver = {
 		.name = "at91-sama5d2_adc",
 		.of_match_table = at91_adc_dt_match,
-		.pm = pm_sleep_ptr(&at91_adc_pm_ops),
+		.pm = pm_ptr(&at91_adc_pm_ops),
 	},
 };
 module_platform_driver(at91_adc_driver)
diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c
index e48446784a0a..36777b827165 100644
--- a/drivers/iio/adc/imx8qxp-adc.c
+++ b/drivers/iio/adc/imx8qxp-adc.c
@@ -202,7 +202,7 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev,
 	struct imx8qxp_adc *adc = iio_priv(indio_dev);
 	struct device *dev = adc->dev;
 
-	u32 ctrl, vref_uv;
+	u32 ctrl;
 	long ret;
 
 	switch (mask) {
@@ -245,8 +245,10 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
-		vref_uv = regulator_get_voltage(adc->vref);
-		*val = vref_uv / 1000;
+		ret = regulator_get_voltage(adc->vref);
+		if (ret < 0)
+			return ret;
+		*val = ret / 1000;
 		*val2 = 12;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index bf5c03c34f84..a7325dbbb99a 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -719,12 +719,12 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev,
 	}
 }
 
-static int ingenic_adc_of_xlate(struct iio_dev *iio_dev,
-				const struct of_phandle_args *iiospec)
+static int ingenic_adc_fwnode_xlate(struct iio_dev *iio_dev,
+				    const struct fwnode_reference_args *iiospec)
 {
 	int i;
 
-	if (!iiospec->args_count)
+	if (!iiospec->nargs)
 		return -EINVAL;
 
 	for (i = 0; i < iio_dev->num_channels; ++i)
@@ -734,16 +734,11 @@ static int ingenic_adc_of_xlate(struct iio_dev *iio_dev,
 	return -EINVAL;
 }
 
-static void ingenic_adc_clk_cleanup(void *data)
-{
-	clk_unprepare(data);
-}
-
 static const struct iio_info ingenic_adc_info = {
 	.write_raw = ingenic_adc_write_raw,
 	.read_raw = ingenic_adc_read_raw,
 	.read_avail = ingenic_adc_read_avail,
-	.of_xlate = ingenic_adc_of_xlate,
+	.fwnode_xlate = ingenic_adc_fwnode_xlate,
 };
 
 static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
@@ -858,13 +853,13 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(adc->base))
 		return PTR_ERR(adc->base);
 
-	adc->clk = devm_clk_get(dev, "adc");
+	adc->clk = devm_clk_get_prepared(dev, "adc");
 	if (IS_ERR(adc->clk)) {
 		dev_err(dev, "Unable to get clock\n");
 		return PTR_ERR(adc->clk);
 	}
 
-	ret = clk_prepare_enable(adc->clk);
+	ret = clk_enable(adc->clk);
 	if (ret) {
 		dev_err(dev, "Failed to enable clock\n");
 		return ret;
@@ -893,12 +888,6 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	usleep_range(2000, 3000); /* Must wait at least 2ms. */
 	clk_disable(adc->clk);
 
-	ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk);
-	if (ret) {
-		dev_err(dev, "Unable to add action\n");
-		return ret;
-	}
-
 	iio_dev->name = "jz-adc";
 	iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
 	iio_dev->setup_ops = &ingenic_buffer_setup_ops;
diff --git a/drivers/iio/adc/lpc18xx_adc.c b/drivers/iio/adc/lpc18xx_adc.c
index 42e6cd6fa6f7..450a243d1f7c 100644
--- a/drivers/iio/adc/lpc18xx_adc.c
+++ b/drivers/iio/adc/lpc18xx_adc.c
@@ -121,11 +121,6 @@ static void lpc18xx_clear_cr_reg(void *data)
 	writel(0, adc->base + LPC18XX_ADC_CR);
 }
 
-static void lpc18xx_clk_disable(void *clk)
-{
-	clk_disable_unprepare(clk);
-}
-
 static void lpc18xx_regulator_disable(void *vref)
 {
 	regulator_disable(vref);
@@ -151,7 +146,7 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(adc->base))
 		return PTR_ERR(adc->base);
 
-	adc->clk = devm_clk_get(&pdev->dev, NULL);
+	adc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(adc->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(adc->clk),
 				     "error getting clock\n");
@@ -177,17 +172,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = clk_prepare_enable(adc->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable clock\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(&pdev->dev, lpc18xx_clk_disable,
-				       adc->clk);
-	if (ret)
-		return ret;
-
 	rate = clk_get_rate(adc->clk);
 	clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET);
 
diff --git a/drivers/iio/adc/ltc2496.c b/drivers/iio/adc/ltc2496.c
index dfb3bb5997e5..2593fa4322eb 100644
--- a/drivers/iio/adc/ltc2496.c
+++ b/drivers/iio/adc/ltc2496.c
@@ -15,6 +15,7 @@
 #include <linux/iio/driver.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/property.h>
 
 #include "ltc2497.h"
 
@@ -74,6 +75,7 @@ static int ltc2496_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, indio_dev);
 	st->spi = spi;
 	st->common_ddata.result_and_measure = ltc2496_result_and_measure;
+	st->common_ddata.chip_info = device_get_match_data(dev);
 
 	return ltc2497core_probe(dev, indio_dev);
 }
@@ -85,8 +87,13 @@ static void ltc2496_remove(struct spi_device *spi)
 	ltc2497core_remove(indio_dev);
 }
 
+static const struct ltc2497_chip_info ltc2496_info = {
+	.resolution = 16,
+	.name = NULL,
+};
+
 static const struct of_device_id ltc2496_of_match[] = {
-	{ .compatible = "lltc,ltc2496", },
+	{ .compatible = "lltc,ltc2496", .data = &ltc2496_info, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ltc2496_of_match);
diff --git a/drivers/iio/adc/ltc2497-core.c b/drivers/iio/adc/ltc2497-core.c
index 2a485c8a1940..f52d37af4d1f 100644
--- a/drivers/iio/adc/ltc2497-core.c
+++ b/drivers/iio/adc/ltc2497-core.c
@@ -95,7 +95,7 @@ static int ltc2497core_read_raw(struct iio_dev *indio_dev,
 			return ret;
 
 		*val = ret / 1000;
-		*val2 = 17;
+		*val2 = ddata->chip_info->resolution + 1;
 
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -169,7 +169,15 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev)
 	struct ltc2497core_driverdata *ddata = iio_priv(indio_dev);
 	int ret;
 
-	indio_dev->name = dev_name(dev);
+	/*
+	 * Keep using dev_name() for the iio_dev's name on some of the parts,
+	 * since updating it would result in a ABI breakage.
+	 */
+	if (ddata->chip_info->name)
+		indio_dev->name = ddata->chip_info->name;
+	else
+		indio_dev->name = dev_name(dev);
+
 	indio_dev->info = &ltc2497core_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = ltc2497core_channel;
diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c
index d58a432bafe1..556f10dfb502 100644
--- a/drivers/iio/adc/ltc2497.c
+++ b/drivers/iio/adc/ltc2497.c
@@ -12,18 +12,31 @@
 #include <linux/iio/driver.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/property.h>
+
+#include <asm/unaligned.h>
 
 #include "ltc2497.h"
 
+enum ltc2497_chip_type {
+	TYPE_LTC2497,
+	TYPE_LTC2499,
+};
+
 struct ltc2497_driverdata {
 	/* this must be the first member */
 	struct ltc2497core_driverdata common_ddata;
 	struct i2c_client *client;
+	u32 recv_size;
+	u32 sub_lsb;
 	/*
 	 * DMA (thus cache coherency maintenance) may require the
 	 * transfer buffers to live in their own cache lines.
 	 */
-	__be32 buf __aligned(IIO_DMA_MINALIGN);
+	union {
+		__be32 d32;
+		u8 d8[3];
+	} data __aligned(IIO_DMA_MINALIGN);
 };
 
 static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
@@ -34,13 +47,43 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
 	int ret;
 
 	if (val) {
-		ret = i2c_master_recv(st->client, (char *)&st->buf, 3);
+		if (st->recv_size == 3)
+			ret = i2c_master_recv(st->client, (char *)&st->data.d8,
+					      st->recv_size);
+		else
+			ret = i2c_master_recv(st->client, (char *)&st->data.d32,
+					      st->recv_size);
 		if (ret < 0) {
 			dev_err(&st->client->dev, "i2c_master_recv failed\n");
 			return ret;
 		}
 
-		*val = (be32_to_cpu(st->buf) >> 14) - (1 << 17);
+		/*
+		 * The data format is 16/24 bit 2s complement, but with an upper sign bit on the
+		 * resolution + 1 position, which is set for positive values only. Given this
+		 * bit's value, subtracting BIT(resolution + 1) from the ADC's result is
+		 * equivalent to a sign extension.
+		 */
+		if (st->recv_size == 3) {
+			*val = (get_unaligned_be24(st->data.d8) >> st->sub_lsb)
+				- BIT(ddata->chip_info->resolution + 1);
+		} else {
+			*val = (be32_to_cpu(st->data.d32) >> st->sub_lsb)
+				- BIT(ddata->chip_info->resolution + 1);
+		}
+
+		/*
+		 * The part started a new conversion at the end of the above i2c
+		 * transfer, so if the address didn't change since the last call
+		 * everything is fine and we can return early.
+		 * If not (which should only happen when some sort of bulk
+		 * conversion is implemented) we have to program the new
+		 * address. Note that this probably fails as the conversion that
+		 * was triggered above is like not complete yet and the two
+		 * operations have to be done in a single transfer.
+		 */
+		if (ddata->addr_prev == address)
+			return 0;
 	}
 
 	ret = i2c_smbus_write_byte(st->client,
@@ -54,9 +97,11 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
 static int ltc2497_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	const struct ltc2497_chip_info *chip_info;
 	struct iio_dev *indio_dev;
 	struct ltc2497_driverdata *st;
 	struct device *dev = &client->dev;
+	u32 resolution;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
 				     I2C_FUNC_SMBUS_WRITE_BYTE))
@@ -71,6 +116,15 @@ static int ltc2497_probe(struct i2c_client *client,
 	st->client = client;
 	st->common_ddata.result_and_measure = ltc2497_result_and_measure;
 
+	chip_info = device_get_match_data(dev);
+	if (!chip_info)
+		chip_info = (const struct ltc2497_chip_info *)id->driver_data;
+	st->common_ddata.chip_info = chip_info;
+
+	resolution = chip_info->resolution;
+	st->sub_lsb = 31 - (resolution + 1);
+	st->recv_size = BITS_TO_BYTES(resolution) + 1;
+
 	return ltc2497core_probe(dev, indio_dev);
 }
 
@@ -81,14 +135,27 @@ static void ltc2497_remove(struct i2c_client *client)
 	ltc2497core_remove(indio_dev);
 }
 
+static const struct ltc2497_chip_info ltc2497_info[] = {
+	[TYPE_LTC2497] = {
+		.resolution = 16,
+		.name = NULL,
+	},
+	[TYPE_LTC2499] = {
+		.resolution = 24,
+		.name = "ltc2499",
+	},
+};
+
 static const struct i2c_device_id ltc2497_id[] = {
-	{ "ltc2497", 0 },
+	{ "ltc2497", (kernel_ulong_t)&ltc2497_info[TYPE_LTC2497] },
+	{ "ltc2499", (kernel_ulong_t)&ltc2497_info[TYPE_LTC2499] },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltc2497_id);
 
 static const struct of_device_id ltc2497_of_match[] = {
-	{ .compatible = "lltc,ltc2497", },
+	{ .compatible = "lltc,ltc2497", .data = &ltc2497_info[TYPE_LTC2497] },
+	{ .compatible = "lltc,ltc2499", .data = &ltc2497_info[TYPE_LTC2499] },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ltc2497_of_match);
diff --git a/drivers/iio/adc/ltc2497.h b/drivers/iio/adc/ltc2497.h
index d0b42dd6b8ad..e023de0d88c4 100644
--- a/drivers/iio/adc/ltc2497.h
+++ b/drivers/iio/adc/ltc2497.h
@@ -4,9 +4,15 @@
 #define LTC2497_CONFIG_DEFAULT		LTC2497_ENABLE
 #define LTC2497_CONVERSION_TIME_MS	150ULL
 
+struct ltc2497_chip_info {
+	u32 resolution;
+	const char *name;
+};
+
 struct ltc2497core_driverdata {
 	struct regulator *ref;
 	ktime_t	time_prev;
+	const struct ltc2497_chip_info	*chip_info;
 	u8 addr_prev;
 	int (*result_and_measure)(struct ltc2497core_driverdata *ddata,
 				  u8 address, int *val);
diff --git a/drivers/iio/adc/max11205.c b/drivers/iio/adc/max11205.c
new file mode 100644
index 000000000000..65fc32971ba5
--- /dev/null
+++ b/drivers/iio/adc/max11205.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim MAX11205 16-Bit Delta-Sigma ADC
+ *
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-max11205.pdf
+ * Copyright (C) 2022 Analog Devices, Inc.
+ * Author: Ramona Bolboaca <ramona.bolboaca@analog.com>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+#define MAX11205_BIT_SCALE	15
+#define MAX11205A_OUT_DATA_RATE	116
+#define MAX11205B_OUT_DATA_RATE	13
+
+enum max11205_chip_type {
+	TYPE_MAX11205A,
+	TYPE_MAX11205B,
+};
+
+struct max11205_chip_info {
+	unsigned int	out_data_rate;
+	const char	*name;
+};
+
+struct max11205_state {
+	const struct max11205_chip_info	*chip_info;
+	struct regulator		*vref;
+	struct ad_sigma_delta		sd;
+};
+
+static const struct ad_sigma_delta_info max11205_sigma_delta_info = {
+	.has_registers = false,
+};
+
+static int max11205_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct max11205_state *st = iio_priv(indio_dev);
+	int reg_mv;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
+	case IIO_CHAN_INFO_SCALE:
+		reg_mv = regulator_get_voltage(st->vref);
+		if (reg_mv < 0)
+			return reg_mv;
+		reg_mv /= 1000;
+		*val = reg_mv;
+		*val2 = MAX11205_BIT_SCALE;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = st->chip_info->out_data_rate;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info max11205_iio_info = {
+	.read_raw = max11205_read_raw,
+	.validate_trigger = ad_sd_validate_trigger,
+};
+
+static const struct iio_chan_spec max11205_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static const struct max11205_chip_info max11205_chip_info[] = {
+	[TYPE_MAX11205A] = {
+		.out_data_rate = MAX11205A_OUT_DATA_RATE,
+		.name = "max11205a",
+	},
+	[TYPE_MAX11205B] = {
+		.out_data_rate = MAX11205B_OUT_DATA_RATE,
+		.name = "max11205b",
+	},
+};
+
+static void max11205_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
+static int max11205_probe(struct spi_device *spi)
+{
+	struct max11205_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	ad_sd_init(&st->sd, indio_dev, spi, &max11205_sigma_delta_info);
+
+	st->chip_info = device_get_match_data(&spi->dev);
+	if (!st->chip_info)
+		st->chip_info =
+			(const struct max11205_chip_info *)spi_get_device_id(spi)->driver_data;
+
+	indio_dev->name = st->chip_info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = max11205_channels;
+	indio_dev->num_channels = 1;
+	indio_dev->info = &max11205_iio_info;
+
+	st->vref = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(st->vref))
+		return dev_err_probe(&spi->dev, PTR_ERR(st->vref),
+				     "Failed to get vref regulator\n");
+
+	ret = regulator_enable(st->vref);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, max11205_reg_disable, st->vref);
+	if (ret)
+		return ret;
+
+	ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id max11205_spi_ids[] = {
+	{ "max11205a", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205A] },
+	{ "max11205b", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205B] },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, max11205_spi_ids);
+
+static const struct of_device_id max11205_dt_ids[] = {
+	{
+		.compatible = "maxim,max11205a",
+		.data = &max11205_chip_info[TYPE_MAX11205A],
+	},
+	{
+		.compatible = "maxim,max11205b",
+		.data = &max11205_chip_info[TYPE_MAX11205B],
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max11205_dt_ids);
+
+static struct spi_driver max11205_spi_driver = {
+	.driver = {
+		.name = "max11205",
+		.of_match_table = max11205_dt_ids,
+	},
+	.probe = max11205_probe,
+	.id_table = max11205_spi_ids,
+};
+module_spi_driver(max11205_spi_driver);
+
+MODULE_AUTHOR("Ramona Bolboaca <ramona.bolboaca@analog.com>");
+MODULE_DESCRIPTION("MAX11205 ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index eef55ed4814a..a28cf86cdce8 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -29,7 +29,6 @@
 #include <linux/iio/sysfs.h>
 #include <linux/iio/events.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/driver.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
@@ -1595,11 +1594,6 @@ static int max1363_probe(struct i2c_client *client,
 	if (!indio_dev)
 		return -ENOMEM;
 
-	ret = devm_iio_map_array_register(&client->dev, indio_dev,
-					  client->dev.platform_data);
-	if (ret < 0)
-		return ret;
-
 	st = iio_priv(indio_dev);
 
 	mutex_init(&st->lock);
diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 890af7dca62d..b35fd2c9c3c0 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -5,16 +5,25 @@
  * Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com>
  * Copyright (C) 2018 Kent Gustavsson <kent@minoris.se>
  */
+#include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/iio/iio.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/trigger.h>
+
+#include <asm/unaligned.h>
+
 #define MCP3911_REG_CHANNEL0		0x00
 #define MCP3911_REG_CHANNEL1		0x03
 #define MCP3911_REG_MOD			0x06
@@ -22,6 +31,8 @@
 #define MCP3911_REG_GAIN		0x09
 
 #define MCP3911_REG_STATUSCOM		0x0a
+#define MCP3911_STATUSCOM_DRHIZ         BIT(12)
+#define MCP3911_STATUSCOM_READ		GENMASK(7, 6)
 #define MCP3911_STATUSCOM_CH1_24WIDTH	BIT(4)
 #define MCP3911_STATUSCOM_CH0_24WIDTH	BIT(3)
 #define MCP3911_STATUSCOM_EN_OFFCAL	BIT(2)
@@ -30,6 +41,7 @@
 #define MCP3911_REG_CONFIG		0x0c
 #define MCP3911_CONFIG_CLKEXT		BIT(1)
 #define MCP3911_CONFIG_VREFEXT		BIT(2)
+#define MCP3911_CONFIG_OSR		GENMASK(13, 11)
 
 #define MCP3911_REG_OFFCAL_CH0		0x0e
 #define MCP3911_REG_GAINCAL_CH0		0x11
@@ -48,12 +60,22 @@
 
 #define MCP3911_NUM_CHANNELS		2
 
+static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 };
+
 struct mcp3911 {
 	struct spi_device *spi;
 	struct mutex lock;
 	struct regulator *vref;
 	struct clk *clki;
 	u32 dev_addr;
+	struct iio_trigger *trig;
+	struct {
+		u32 channels[MCP3911_NUM_CHANNELS];
+		s64 ts __aligned(8);
+	} scan;
+
+	u8 tx_buf __aligned(IIO_DMA_MINALIGN);
+	u8 rx_buf[MCP3911_NUM_CHANNELS * 3];
 };
 
 static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len)
@@ -98,6 +120,36 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
 	return mcp3911_write(adc, reg, val, len);
 }
 
+static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		return IIO_VAL_INT;
+	default:
+		return IIO_VAL_INT_PLUS_NANO;
+	}
+}
+
+static int mcp3911_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*type = IIO_VAL_INT;
+		*vals = mcp3911_osr_table;
+		*length = ARRAY_SIZE(mcp3911_osr_table);
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
 static int mcp3911_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *channel, int *val,
 			    int *val2, long mask)
@@ -126,6 +178,15 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
 
 		ret = IIO_VAL_INT;
 		break;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
+		if (ret)
+			goto out;
+
+		*val = FIELD_GET(MCP3911_CONFIG_OSR, *val);
+		*val = 32 << *val;
+		ret = IIO_VAL_INT;
+		break;
 
 	case IIO_CHAN_INFO_SCALE:
 		if (adc->vref) {
@@ -185,6 +246,17 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
 				MCP3911_STATUSCOM_EN_OFFCAL,
 				MCP3911_STATUSCOM_EN_OFFCAL, 2);
 		break;
+
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		for (int i = 0; i < sizeof(mcp3911_osr_table); i++) {
+			if (val == mcp3911_osr_table[i]) {
+				val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
+				ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR,
+						val, 2);
+				break;
+			}
+		}
+		break;
 	}
 
 out:
@@ -196,25 +268,80 @@ out:
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
 		.channel = idx,					\
+		.scan_index = idx,				\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
 			BIT(IIO_CHAN_INFO_OFFSET) |		\
 			BIT(IIO_CHAN_INFO_SCALE),		\
+		.info_mask_shared_by_type_available =		\
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 24,				\
+			.storagebits = 32,			\
+			.endianness = IIO_BE,			\
+		},						\
 }
 
 static const struct iio_chan_spec mcp3911_channels[] = {
 	MCP3911_CHAN(0),
 	MCP3911_CHAN(1),
+	IIO_CHAN_SOFT_TIMESTAMP(2),
 };
 
+static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mcp3911 *adc = iio_priv(indio_dev);
+	struct spi_transfer xfer[] = {
+		{
+			.tx_buf = &adc->tx_buf,
+			.len = 1,
+		}, {
+			.rx_buf = adc->rx_buf,
+			.len = sizeof(adc->rx_buf),
+		},
+	};
+	int scan_index;
+	int i = 0;
+	int ret;
+
+	mutex_lock(&adc->lock);
+	adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr);
+	ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer));
+	if (ret < 0) {
+		dev_warn(&adc->spi->dev,
+				"failed to get conversion data\n");
+		goto out;
+	}
+
+	for_each_set_bit(scan_index, indio_dev->active_scan_mask, indio_dev->masklength) {
+		const struct iio_chan_spec *scan_chan = &indio_dev->channels[scan_index];
+
+		adc->scan.channels[i] = get_unaligned_be24(&adc->rx_buf[scan_chan->channel * 3]);
+		i++;
+	}
+	iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan,
+					   iio_get_time_ns(indio_dev));
+out:
+	mutex_unlock(&adc->lock);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
 static const struct iio_info mcp3911_info = {
 	.read_raw = mcp3911_read_raw,
 	.write_raw = mcp3911_write_raw,
+	.read_avail = mcp3911_read_avail,
+	.write_raw_get_fmt = mcp3911_write_raw_get_fmt,
 };
 
 static int mcp3911_config(struct mcp3911 *adc)
 {
 	struct device *dev = &adc->spi->dev;
-	u32 configreg;
+	u32 regval;
 	int ret;
 
 	ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
@@ -233,31 +360,67 @@ static int mcp3911_config(struct mcp3911 *adc)
 	}
 	dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
 
-	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &configreg, 2);
+	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &regval, 2);
 	if (ret)
 		return ret;
 
+	regval &= ~MCP3911_CONFIG_VREFEXT;
 	if (adc->vref) {
 		dev_dbg(&adc->spi->dev, "use external voltage reference\n");
-		configreg |= MCP3911_CONFIG_VREFEXT;
+		regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 1);
 	} else {
 		dev_dbg(&adc->spi->dev,
 			"use internal voltage reference (1.2V)\n");
-		configreg &= ~MCP3911_CONFIG_VREFEXT;
+		regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 0);
 	}
 
+	regval &= ~MCP3911_CONFIG_CLKEXT;
 	if (adc->clki) {
 		dev_dbg(&adc->spi->dev, "use external clock as clocksource\n");
-		configreg |= MCP3911_CONFIG_CLKEXT;
+		regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 1);
 	} else {
 		dev_dbg(&adc->spi->dev,
 			"use crystal oscillator as clocksource\n");
-		configreg &= ~MCP3911_CONFIG_CLKEXT;
+		regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 0);
 	}
 
-	return  mcp3911_write(adc, MCP3911_REG_CONFIG, configreg, 2);
+	ret = mcp3911_write(adc, MCP3911_REG_CONFIG, regval, 2);
+	if (ret)
+		return ret;
+
+	ret = mcp3911_read(adc, MCP3911_REG_STATUSCOM, &regval, 2);
+	if (ret)
+		return ret;
+
+	/* Address counter incremented, cycle through register types */
+	regval &= ~MCP3911_STATUSCOM_READ;
+	regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02);
+
+	return  mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2);
 }
 
+static void mcp3911_cleanup_regulator(void *vref)
+{
+	regulator_disable(vref);
+}
+
+static int mcp3911_set_trigger_state(struct iio_trigger *trig, bool enable)
+{
+	struct mcp3911 *adc = iio_trigger_get_drvdata(trig);
+
+	if (enable)
+		enable_irq(adc->spi->irq);
+	else
+		disable_irq(adc->spi->irq);
+
+	return 0;
+}
+
+static const struct iio_trigger_ops mcp3911_trigger_ops = {
+	.validate_device = iio_trigger_validate_own_device,
+	.set_trigger_state = mcp3911_set_trigger_state,
+};
+
 static int mcp3911_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -286,9 +449,14 @@ static int mcp3911_probe(struct spi_device *spi)
 		ret = regulator_enable(adc->vref);
 		if (ret)
 			return ret;
+
+		ret = devm_add_action_or_reset(&spi->dev,
+				mcp3911_cleanup_regulator, adc->vref);
+		if (ret)
+			return ret;
 	}
 
-	adc->clki = devm_clk_get(&adc->spi->dev, NULL);
+	adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL);
 	if (IS_ERR(adc->clki)) {
 		if (PTR_ERR(adc->clki) == -ENOENT) {
 			adc->clki = NULL;
@@ -296,21 +464,22 @@ static int mcp3911_probe(struct spi_device *spi)
 			dev_err(&adc->spi->dev,
 				"failed to get adc clk (%ld)\n",
 				PTR_ERR(adc->clki));
-			ret = PTR_ERR(adc->clki);
-			goto reg_disable;
-		}
-	} else {
-		ret = clk_prepare_enable(adc->clki);
-		if (ret < 0) {
-			dev_err(&adc->spi->dev,
-				"Failed to enable clki: %d\n", ret);
-			goto reg_disable;
+			return PTR_ERR(adc->clki);
 		}
 	}
 
 	ret = mcp3911_config(adc);
 	if (ret)
-		goto clk_disable;
+		return ret;
+
+	if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz"))
+		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
+				0, 2);
+	else
+		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
+				MCP3911_STATUSCOM_DRHIZ, 2);
+	if (ret)
+		return ret;
 
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -322,31 +491,38 @@ static int mcp3911_probe(struct spi_device *spi)
 
 	mutex_init(&adc->lock);
 
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto clk_disable;
-
-	return ret;
-
-clk_disable:
-	clk_disable_unprepare(adc->clki);
-reg_disable:
-	if (adc->vref)
-		regulator_disable(adc->vref);
+	if (spi->irq > 0) {
+		adc->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
+				indio_dev->name,
+				iio_device_id(indio_dev));
+		if (!adc->trig)
+			return PTR_ERR(adc->trig);
 
-	return ret;
-}
+		adc->trig->ops = &mcp3911_trigger_ops;
+		iio_trigger_set_drvdata(adc->trig, adc);
+		ret = devm_iio_trigger_register(&spi->dev, adc->trig);
+		if (ret)
+			return ret;
 
-static void mcp3911_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct mcp3911 *adc = iio_priv(indio_dev);
+		/*
+		 * The device generates interrupts as long as it is powered up.
+		 * Some platforms might not allow the option to power it down so
+		 * don't enable the interrupt to avoid extra load on the system.
+		 */
+		ret = devm_request_irq(&spi->dev, spi->irq,
+				&iio_trigger_generic_data_rdy_poll, IRQF_NO_AUTOEN | IRQF_ONESHOT,
+				indio_dev->name, adc->trig);
+		if (ret)
+			return ret;
+	}
 
-	iio_device_unregister(indio_dev);
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+			NULL,
+			mcp3911_trigger_handler, NULL);
+	if (ret)
+		return ret;
 
-	clk_disable_unprepare(adc->clki);
-	if (adc->vref)
-		regulator_disable(adc->vref);
+	return devm_iio_device_register(&adc->spi->dev, indio_dev);
 }
 
 static const struct of_device_id mcp3911_dt_ids[] = {
@@ -367,7 +543,6 @@ static struct spi_driver mcp3911_driver = {
 		.of_match_table = mcp3911_dt_ids,
 	},
 	.probe = mcp3911_probe,
-	.remove = mcp3911_remove,
 	.id_table = mcp3911_id,
 };
 module_spi_driver(mcp3911_driver);
diff --git a/drivers/iio/adc/mt6360-adc.c b/drivers/iio/adc/mt6360-adc.c
index 35260d9e4e47..3710473e526f 100644
--- a/drivers/iio/adc/mt6360-adc.c
+++ b/drivers/iio/adc/mt6360-adc.c
@@ -353,7 +353,7 @@ static int mt6360_adc_probe(struct platform_device *pdev)
 	return devm_iio_device_register(&pdev->dev, indio_dev);
 }
 
-static const struct of_device_id __maybe_unused mt6360_adc_of_id[] = {
+static const struct of_device_id mt6360_adc_of_id[] = {
 	{ .compatible = "mediatek,mt6360-adc", },
 	{}
 };
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 5e9e56821075..eb424496ee1d 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -14,9 +14,9 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -694,8 +694,8 @@ static int pm8xxx_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
-static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
-			   const struct of_phandle_args *iiospec)
+static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev,
+			       const struct fwnode_reference_args *iiospec)
 {
 	struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
 	u8 pre_scale_mux;
@@ -706,10 +706,10 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
 	 * First cell is prescaler or premux, second cell is analog
 	 * mux.
 	 */
-	if (iiospec->args_count != 2) {
-		dev_err(&indio_dev->dev, "wrong number of arguments for %pOFn need 2 got %d\n",
-			iiospec->np,
-			iiospec->args_count);
+	if (iiospec->nargs != 2) {
+		dev_err(&indio_dev->dev, "wrong number of arguments for %pfwP need 2 got %d\n",
+			iiospec->fwnode,
+			iiospec->nargs);
 		return -EINVAL;
 	}
 	pre_scale_mux = (u8)iiospec->args[0];
@@ -727,34 +727,34 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
 }
 
 static const struct iio_info pm8xxx_xoadc_info = {
-	.of_xlate = pm8xxx_of_xlate,
+	.fwnode_xlate = pm8xxx_fwnode_xlate,
 	.read_raw = pm8xxx_read_raw,
 };
 
 static int pm8xxx_xoadc_parse_channel(struct device *dev,
-				      struct device_node *np,
+				      struct fwnode_handle *fwnode,
 				      const struct xoadc_channel *hw_channels,
 				      struct iio_chan_spec *iio_chan,
 				      struct pm8xxx_chan_info *ch)
 {
-	const char *name = np->name;
+	const char *name = fwnode_get_name(fwnode);
 	const struct xoadc_channel *hwchan;
-	u32 pre_scale_mux, amux_channel;
+	u32 pre_scale_mux, amux_channel, reg[2];
 	u32 rsv, dec;
 	int ret;
 	int chid;
 
-	ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux);
+	ret = fwnode_property_read_u32_array(fwnode, "reg", reg,
+					     ARRAY_SIZE(reg));
 	if (ret) {
-		dev_err(dev, "invalid pre scale/mux number %s\n", name);
-		return ret;
-	}
-	ret = of_property_read_u32_index(np, "reg", 1, &amux_channel);
-	if (ret) {
-		dev_err(dev, "invalid amux channel number %s\n", name);
+		dev_err(dev, "invalid pre scale/mux or amux channel number %s\n",
+			name);
 		return ret;
 	}
 
+	pre_scale_mux = reg[0];
+	amux_channel = reg[1];
+
 	/* Find the right channel setting */
 	chid = 0;
 	hwchan = &hw_channels[0];
@@ -778,7 +778,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
 	/* Everyone seems to use default ("type 2") decimation */
 	ch->decimation = VADC_DEF_DECIMATION;
 
-	if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) {
+	if (!fwnode_property_read_u32(fwnode, "qcom,ratiometric", &rsv)) {
 		ch->calibration = VADC_CALIB_RATIOMETRIC;
 		if (rsv > XOADC_RSV_MAX) {
 			dev_err(dev, "%s too large RSV value %d\n", name, rsv);
@@ -791,7 +791,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
 	}
 
 	/* Optional decimation, if omitted we use the default */
-	ret = of_property_read_u32(np, "qcom,decimation", &dec);
+	ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &dec);
 	if (!ret) {
 		ret = qcom_vadc_decimation_from_dt(dec);
 		if (ret < 0) {
@@ -820,15 +820,14 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
 	return 0;
 }
 
-static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc,
-				       struct device_node *np)
+static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc)
 {
-	struct device_node *child;
+	struct fwnode_handle *child;
 	struct pm8xxx_chan_info *ch;
 	int ret;
 	int i;
 
-	adc->nchans = of_get_available_child_count(np);
+	adc->nchans = device_get_child_node_count(adc->dev);
 	if (!adc->nchans) {
 		dev_err(adc->dev, "no channel children\n");
 		return -ENODEV;
@@ -846,14 +845,14 @@ static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc,
 		return -ENOMEM;
 
 	i = 0;
-	for_each_available_child_of_node(np, child) {
+	device_for_each_child_node(adc->dev, child) {
 		ch = &adc->chans[i];
 		ret = pm8xxx_xoadc_parse_channel(adc->dev, child,
 						 adc->variant->channels,
 						 &adc->iio_chans[i],
 						 ch);
 		if (ret) {
-			of_node_put(child);
+			fwnode_handle_put(child);
 			return ret;
 		}
 		i++;
@@ -884,12 +883,11 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev)
 	const struct xoadc_variant *variant;
 	struct pm8xxx_xoadc *adc;
 	struct iio_dev *indio_dev;
-	struct device_node *np = pdev->dev.of_node;
 	struct regmap *map;
 	struct device *dev = &pdev->dev;
 	int ret;
 
-	variant = of_device_get_match_data(dev);
+	variant = device_get_match_data(dev);
 	if (!variant)
 		return -ENODEV;
 
@@ -904,7 +902,7 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev)
 	init_completion(&adc->complete);
 	mutex_init(&adc->lock);
 
-	ret = pm8xxx_xoadc_parse_channels(adc, np);
+	ret = pm8xxx_xoadc_parse_channels(adc);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index 87438d1e5c0b..821fee60a765 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -14,9 +14,9 @@
 #include <linux/log2.h>
 #include <linux/math64.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
@@ -403,8 +403,8 @@ static irqreturn_t adc5_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int adc5_of_xlate(struct iio_dev *indio_dev,
-				const struct of_phandle_args *iiospec)
+static int adc5_fwnode_xlate(struct iio_dev *indio_dev,
+			     const struct fwnode_reference_args *iiospec)
 {
 	struct adc5_chip *adc = iio_priv(indio_dev);
 	int i;
@@ -416,8 +416,8 @@ static int adc5_of_xlate(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
-static int adc7_of_xlate(struct iio_dev *indio_dev,
-				const struct of_phandle_args *iiospec)
+static int adc7_fwnode_xlate(struct iio_dev *indio_dev,
+			     const struct fwnode_reference_args *iiospec)
 {
 	struct adc5_chip *adc = iio_priv(indio_dev);
 	int i, v_channel;
@@ -481,12 +481,12 @@ static int adc7_read_raw(struct iio_dev *indio_dev,
 
 static const struct iio_info adc5_info = {
 	.read_raw = adc5_read_raw,
-	.of_xlate = adc5_of_xlate,
+	.fwnode_xlate = adc5_fwnode_xlate,
 };
 
 static const struct iio_info adc7_info = {
 	.read_raw = adc7_read_raw,
-	.of_xlate = adc7_of_xlate,
+	.fwnode_xlate = adc7_fwnode_xlate,
 };
 
 struct adc5_channels {
@@ -526,6 +526,8 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
 					SCALE_HW_CALIB_DEFAULT)
 	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
 					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_VCOIN]		= ADC5_CHAN_VOLT("vcoin", 1,
+					SCALE_HW_CALIB_DEFAULT)
 	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
 					SCALE_HW_CALIB_PMIC_THERM)
 	[ADC5_USB_IN_I]		= ADC5_CHAN_VOLT("usb_in_i_uv", 0,
@@ -549,6 +551,12 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
 	[ADC5_AMUX_THM2]	= ADC5_CHAN_TEMP("amux_thm2", 0,
 					SCALE_HW_CALIB_PM5_SMB_TEMP)
+	[ADC5_GPIO1_100K_PU]	= ADC5_CHAN_TEMP("gpio1_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_GPIO3_100K_PU]	= ADC5_CHAN_TEMP("gpio3_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_GPIO4_100K_PU]	= ADC5_CHAN_TEMP("gpio4_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
 };
 
 static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = {
@@ -589,6 +597,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
 					SCALE_HW_CALIB_DEFAULT)
 	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
 					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_VREF_VADC]	= ADC5_CHAN_VOLT("vref_vadc", 0,
+					SCALE_HW_CALIB_DEFAULT)
 	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
 					SCALE_HW_CALIB_DEFAULT)
 	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
@@ -611,18 +621,18 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
 };
 
-static int adc5_get_dt_channel_data(struct adc5_chip *adc,
+static int adc5_get_fw_channel_data(struct adc5_chip *adc,
 				    struct adc5_channel_prop *prop,
-				    struct device_node *node,
+				    struct fwnode_handle *fwnode,
 				    const struct adc5_data *data)
 {
-	const char *name = node->name, *channel_name;
+	const char *name = fwnode_get_name(fwnode), *channel_name;
 	u32 chan, value, varr[2];
 	u32 sid = 0;
 	int ret;
 	struct device *dev = adc->dev;
 
-	ret = of_property_read_u32(node, "reg", &chan);
+	ret = fwnode_property_read_u32(fwnode, "reg", &chan);
 	if (ret) {
 		dev_err(dev, "invalid channel number %s\n", name);
 		return ret;
@@ -647,15 +657,13 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 	prop->channel = chan;
 	prop->sid = sid;
 
-	channel_name = of_get_property(node,
-				"label", NULL) ? : node->name;
-	if (!channel_name) {
-		dev_err(dev, "Invalid channel name\n");
-		return -EINVAL;
-	}
+	ret = fwnode_property_read_string(fwnode, "label", &channel_name);
+	if (ret)
+		channel_name = name;
+
 	prop->datasheet_name = channel_name;
 
-	ret = of_property_read_u32(node, "qcom,decimation", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value);
 	if (!ret) {
 		ret = qcom_adc5_decimation_from_dt(value, data->decimation);
 		if (ret < 0) {
@@ -668,7 +676,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 		prop->decimation = ADC5_DECIMATION_DEFAULT;
 	}
 
-	ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+	ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2);
 	if (!ret) {
 		ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]);
 		if (ret < 0) {
@@ -682,7 +690,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 			adc->data->adc_chans[prop->channel].prescale_index;
 	}
 
-	ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value);
 	if (!ret) {
 		u8 dig_version[2];
 
@@ -713,7 +721,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 		prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
 	}
 
-	ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value);
 	if (!ret) {
 		ret = qcom_adc5_avg_samples_from_dt(value);
 		if (ret < 0) {
@@ -726,7 +734,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 		prop->avg_samples = VADC_DEF_AVG_SAMPLES;
 	}
 
-	if (of_property_read_bool(node, "qcom,ratiometric"))
+	if (fwnode_property_read_bool(fwnode, "qcom,ratiometric"))
 		prop->cal_method = ADC5_RATIOMETRIC_CAL;
 	else
 		prop->cal_method = ADC5_ABSOLUTE_CAL;
@@ -801,16 +809,16 @@ static const struct of_device_id adc5_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, adc5_match_table);
 
-static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
+static int adc5_get_fw_data(struct adc5_chip *adc)
 {
 	const struct adc5_channels *adc_chan;
 	struct iio_chan_spec *iio_chan;
 	struct adc5_channel_prop prop, *chan_props;
-	struct device_node *child;
+	struct fwnode_handle *child;
 	unsigned int index = 0;
 	int ret;
 
-	adc->nchannels = of_get_available_child_count(node);
+	adc->nchannels = device_get_child_node_count(adc->dev);
 	if (!adc->nchannels)
 		return -EINVAL;
 
@@ -826,14 +834,14 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
 
 	chan_props = adc->chan_props;
 	iio_chan = adc->iio_chans;
-	adc->data = of_device_get_match_data(adc->dev);
+	adc->data = device_get_match_data(adc->dev);
 	if (!adc->data)
 		adc->data = &adc5_data_pmic;
 
-	for_each_available_child_of_node(node, child) {
-		ret = adc5_get_dt_channel_data(adc, &prop, child, adc->data);
+	device_for_each_child_node(adc->dev, child) {
+		ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data);
 		if (ret) {
-			of_node_put(child);
+			fwnode_handle_put(child);
 			return ret;
 		}
 
@@ -858,7 +866,6 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
 
 static int adc5_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	struct adc5_chip *adc;
@@ -870,7 +877,7 @@ static int adc5_probe(struct platform_device *pdev)
 	if (!regmap)
 		return -ENODEV;
 
-	ret = of_property_read_u32(node, "reg", &reg);
+	ret = device_property_read_u32(dev, "reg", &reg);
 	if (ret < 0)
 		return ret;
 
@@ -886,7 +893,7 @@ static int adc5_probe(struct platform_device *pdev)
 	init_completion(&adc->complete);
 	mutex_init(&adc->lock);
 
-	ret = adc5_get_dt_data(adc, node);
+	ret = adc5_get_fw_data(adc);
 	if (ret) {
 		dev_err(dev, "adc get dt data failed\n");
 		return ret;
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index 34202ba52469..bcff0f62b70e 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -13,8 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/math64.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/log2.h>
@@ -481,8 +482,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static int vadc_of_xlate(struct iio_dev *indio_dev,
-			 const struct of_phandle_args *iiospec)
+static int vadc_fwnode_xlate(struct iio_dev *indio_dev,
+			     const struct fwnode_reference_args *iiospec)
 {
 	struct vadc_priv *vadc = iio_priv(indio_dev);
 	unsigned int i;
@@ -496,7 +497,7 @@ static int vadc_of_xlate(struct iio_dev *indio_dev,
 
 static const struct iio_info vadc_info = {
 	.read_raw = vadc_read_raw,
-	.of_xlate = vadc_of_xlate,
+	.fwnode_xlate = vadc_fwnode_xlate,
 };
 
 struct vadc_channels {
@@ -647,15 +648,15 @@ static const struct vadc_channels vadc_chans[] = {
 	VADC_CHAN_NO_SCALE(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0)
 };
 
-static int vadc_get_dt_channel_data(struct device *dev,
+static int vadc_get_fw_channel_data(struct device *dev,
 				    struct vadc_channel_prop *prop,
-				    struct device_node *node)
+				    struct fwnode_handle *fwnode)
 {
-	const char *name = node->name;
+	const char *name = fwnode_get_name(fwnode);
 	u32 chan, value, varr[2];
 	int ret;
 
-	ret = of_property_read_u32(node, "reg", &chan);
+	ret = fwnode_property_read_u32(fwnode, "reg", &chan);
 	if (ret) {
 		dev_err(dev, "invalid channel number %s\n", name);
 		return ret;
@@ -669,7 +670,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
 	/* the channel has DT description */
 	prop->channel = chan;
 
-	ret = of_property_read_u32(node, "qcom,decimation", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value);
 	if (!ret) {
 		ret = qcom_vadc_decimation_from_dt(value);
 		if (ret < 0) {
@@ -682,7 +683,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
 		prop->decimation = VADC_DEF_DECIMATION;
 	}
 
-	ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+	ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2);
 	if (!ret) {
 		ret = vadc_prescaling_from_dt(varr[0], varr[1]);
 		if (ret < 0) {
@@ -695,7 +696,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
 		prop->prescale = vadc_chans[prop->channel].prescale_index;
 	}
 
-	ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value);
 	if (!ret) {
 		ret = vadc_hw_settle_time_from_dt(value);
 		if (ret < 0) {
@@ -708,7 +709,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
 		prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
 	}
 
-	ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+	ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value);
 	if (!ret) {
 		ret = vadc_avg_samples_from_dt(value);
 		if (ret < 0) {
@@ -721,7 +722,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
 		prop->avg_samples = VADC_DEF_AVG_SAMPLES;
 	}
 
-	if (of_property_read_bool(node, "qcom,ratiometric"))
+	if (fwnode_property_read_bool(fwnode, "qcom,ratiometric"))
 		prop->calibration = VADC_CALIB_RATIOMETRIC;
 	else
 		prop->calibration = VADC_CALIB_ABSOLUTE;
@@ -731,16 +732,16 @@ static int vadc_get_dt_channel_data(struct device *dev,
 	return 0;
 }
 
-static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
+static int vadc_get_fw_data(struct vadc_priv *vadc)
 {
 	const struct vadc_channels *vadc_chan;
 	struct iio_chan_spec *iio_chan;
 	struct vadc_channel_prop prop;
-	struct device_node *child;
+	struct fwnode_handle *child;
 	unsigned int index = 0;
 	int ret;
 
-	vadc->nchannels = of_get_available_child_count(node);
+	vadc->nchannels = device_get_child_node_count(vadc->dev);
 	if (!vadc->nchannels)
 		return -EINVAL;
 
@@ -756,10 +757,10 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
 
 	iio_chan = vadc->iio_chans;
 
-	for_each_available_child_of_node(node, child) {
-		ret = vadc_get_dt_channel_data(vadc->dev, &prop, child);
+	device_for_each_child_node(vadc->dev, child) {
+		ret = vadc_get_fw_channel_data(vadc->dev, &prop, child);
 		if (ret) {
-			of_node_put(child);
+			fwnode_handle_put(child);
 			return ret;
 		}
 
@@ -848,7 +849,6 @@ static int vadc_check_revision(struct vadc_priv *vadc)
 
 static int vadc_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	struct vadc_priv *vadc;
@@ -860,7 +860,7 @@ static int vadc_probe(struct platform_device *pdev)
 	if (!regmap)
 		return -ENODEV;
 
-	ret = of_property_read_u32(node, "reg", &reg);
+	ret = device_property_read_u32(dev, "reg", &reg);
 	if (ret < 0)
 		return ret;
 
@@ -880,7 +880,7 @@ static int vadc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = vadc_get_dt_data(vadc, node);
+	ret = vadc_get_fw_data(vadc);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c
new file mode 100644
index 000000000000..c1b2e8dc9a26
--- /dev/null
+++ b/drivers/iio/adc/rtq6056.c
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Richtek Technology Corp.
+ *
+ * ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define RTQ6056_REG_CONFIG	0x00
+#define RTQ6056_REG_SHUNTVOLT	0x01
+#define RTQ6056_REG_BUSVOLT	0x02
+#define RTQ6056_REG_POWER	0x03
+#define RTQ6056_REG_CURRENT	0x04
+#define RTQ6056_REG_CALIBRATION	0x05
+#define RTQ6056_REG_MASKENABLE	0x06
+#define RTQ6056_REG_ALERTLIMIT	0x07
+#define RTQ6056_REG_MANUFACTID	0xFE
+#define RTQ6056_REG_DIEID	0xFF
+
+#define RTQ6056_VENDOR_ID	0x1214
+#define RTQ6056_DEFAULT_CONFIG	0x4127
+#define RTQ6056_CONT_ALLON	7
+
+enum {
+	RTQ6056_CH_VSHUNT = 0,
+	RTQ6056_CH_VBUS,
+	RTQ6056_CH_POWER,
+	RTQ6056_CH_CURRENT,
+	RTQ6056_MAX_CHANNEL
+};
+
+enum {
+	F_OPMODE = 0,
+	F_VSHUNTCT,
+	F_VBUSCT,
+	F_AVG,
+	F_RESET,
+	F_MAX_FIELDS
+};
+
+struct rtq6056_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct regmap_field *rm_fields[F_MAX_FIELDS];
+	u32 shunt_resistor_uohm;
+	int vshuntct_us;
+	int vbusct_us;
+	int avg_sample;
+};
+
+static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = {
+	[F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2),
+	[F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5),
+	[F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8),
+	[F_AVG]	= REG_FIELD(RTQ6056_REG_CONFIG, 9, 11),
+	[F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15),
+};
+
+static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = {
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.address = RTQ6056_REG_SHUNTVOLT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+	},
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.address = RTQ6056_REG_BUSVOLT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+	},
+	{
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 2,
+		.address = RTQ6056_REG_POWER,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.scan_index = 2,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+	},
+	{
+		.type = IIO_CURRENT,
+		.indexed = 1,
+		.channel = 3,
+		.address = RTQ6056_REG_CURRENT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.scan_index = 3,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL),
+};
+
+static int rtq6056_adc_read_channel(struct rtq6056_priv *priv,
+				    struct iio_chan_spec const *ch,
+				    int *val)
+{
+	struct device *dev = priv->dev;
+	unsigned int addr = ch->address;
+	unsigned int regval;
+	int ret;
+
+	pm_runtime_get_sync(dev);
+	ret = regmap_read(priv->regmap, addr, &regval);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put(dev);
+	if (ret)
+		return ret;
+
+	/* Power and VBUS is unsigned 16-bit, others are signed 16-bit */
+	if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER)
+		*val = regval;
+	else
+		*val = sign_extend32(regval, 16);
+
+	return IIO_VAL_INT;
+}
+
+static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val,
+				  int *val2)
+{
+	switch (ch->address) {
+	case RTQ6056_REG_SHUNTVOLT:
+		/* VSHUNT lsb  2.5uV */
+		*val = 2500;
+		*val2 = 1000000;
+		return IIO_VAL_FRACTIONAL;
+	case RTQ6056_REG_BUSVOLT:
+		/* VBUS lsb 1.25mV */
+		*val = 1250;
+		*val2 = 1000;
+		return IIO_VAL_FRACTIONAL;
+	case RTQ6056_REG_POWER:
+		/* Power lsb 25mW */
+		*val = 25;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * Sample frequency for channel VSHUNT and VBUS. The indices correspond
+ * with the bit value expected by the chip. And it can be found at
+ * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+ */
+static const int rtq6056_samp_freq_list[] = {
+	7194, 4926, 3717, 1904, 964, 485, 243, 122,
+};
+
+static int rtq6056_adc_set_samp_freq(struct rtq6056_priv *priv,
+				     struct iio_chan_spec const *ch, int val)
+{
+	struct regmap_field *rm_field;
+	unsigned int selector;
+	int *ct, ret;
+
+	if (val > 7194 || val < 122)
+		return -EINVAL;
+
+	if (ch->address == RTQ6056_REG_SHUNTVOLT) {
+		rm_field = priv->rm_fields[F_VSHUNTCT];
+		ct = &priv->vshuntct_us;
+	} else if (ch->address == RTQ6056_REG_BUSVOLT) {
+		rm_field = priv->rm_fields[F_VBUSCT];
+		ct = &priv->vbusct_us;
+	} else
+		return -EINVAL;
+
+	selector = find_closest_descending(val, rtq6056_samp_freq_list,
+					   ARRAY_SIZE(rtq6056_samp_freq_list));
+
+	ret = regmap_field_write(rm_field, selector);
+	if (ret)
+		return ret;
+
+	*ct = 1000000 / rtq6056_samp_freq_list[selector];
+
+	return 0;
+}
+
+/*
+ * Available averaging rate for rtq6056. The indices correspond with the bit
+ * value expected by the chip. And it can be found at
+ * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+ */
+static const int rtq6056_avg_sample_list[] = {
+	1, 4, 16, 64, 128, 256, 512, 1024,
+};
+
+static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val)
+{
+	unsigned int selector;
+	int ret;
+
+	if (val > 1024 || val < 1)
+		return -EINVAL;
+
+	selector = find_closest(val, rtq6056_avg_sample_list,
+				ARRAY_SIZE(rtq6056_avg_sample_list));
+
+	ret = regmap_field_write(priv->rm_fields[F_AVG], selector);
+	if (ret)
+		return ret;
+
+	priv->avg_sample = rtq6056_avg_sample_list[selector];
+
+	return 0;
+}
+
+static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv,
+				       struct iio_chan_spec const *ch, int *val)
+{
+	int sample_time;
+
+	if (ch->address == RTQ6056_REG_SHUNTVOLT)
+		sample_time = priv->vshuntct_us;
+	else if (ch->address == RTQ6056_REG_BUSVOLT)
+		sample_time = priv->vbusct_us;
+	else {
+		sample_time = priv->vshuntct_us + priv->vbusct_us;
+		sample_time *= priv->avg_sample;
+	}
+
+	*val = 1000000 / sample_time;
+
+	return IIO_VAL_INT;
+}
+
+static int rtq6056_adc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int *val,
+				int *val2, long mask)
+{
+	struct rtq6056_priv *priv = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return rtq6056_adc_read_channel(priv, chan, val);
+	case IIO_CHAN_INFO_SCALE:
+		return rtq6056_adc_read_scale(chan, val, val2);
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = priv->avg_sample;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return rtq6056_adc_get_sample_freq(priv, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rtq6056_adc_read_avail(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  const int **vals, int *type, int *length,
+				  long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = rtq6056_samp_freq_list;
+		*type = IIO_VAL_INT;
+		*length = ARRAY_SIZE(rtq6056_samp_freq_list);
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*vals = rtq6056_avg_sample_list;
+		*type = IIO_VAL_INT;
+		*length = ARRAY_SIZE(rtq6056_avg_sample_list);
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rtq6056_adc_write_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan, int val,
+				 int val2, long mask)
+{
+	struct rtq6056_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = rtq6056_adc_set_samp_freq(priv, chan, val);
+		break;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		ret = rtq6056_adc_set_average(priv, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	iio_device_release_direct_mode(indio_dev);
+
+	return ret;
+}
+
+static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = {
+	[RTQ6056_CH_VSHUNT] = "Vshunt",
+	[RTQ6056_CH_VBUS] = "Vbus",
+	[RTQ6056_CH_POWER] = "Power",
+	[RTQ6056_CH_CURRENT] = "Current",
+};
+
+static int rtq6056_adc_read_label(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  char *label)
+{
+	return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]);
+}
+
+static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv,
+				      int resistor_uohm)
+{
+	unsigned int calib_val;
+	int ret;
+
+	if (resistor_uohm <= 0) {
+		dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm);
+		return -EINVAL;
+	}
+
+	/* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */
+	calib_val = 5120000 / resistor_uohm;
+	ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val);
+	if (ret)
+		return ret;
+
+	priv->shunt_resistor_uohm = resistor_uohm;
+
+	return 0;
+}
+
+static ssize_t shunt_resistor_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int vals[2] = { priv->shunt_resistor_uohm, 1000000 };
+
+	return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals);
+}
+
+static ssize_t shunt_resistor_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct rtq6056_priv *priv = iio_priv(indio_dev);
+	int val, val_fract, ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract);
+	if (ret)
+		goto out_store;
+
+	ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract);
+
+out_store:
+	iio_device_release_direct_mode(indio_dev);
+
+	return ret ?: len;
+}
+
+static IIO_DEVICE_ATTR_RW(shunt_resistor, 0);
+
+static struct attribute *rtq6056_attributes[] = {
+	&iio_dev_attr_shunt_resistor.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group rtq6056_attribute_group = {
+	.attrs = rtq6056_attributes,
+};
+
+static const struct iio_info rtq6056_info = {
+	.attrs = &rtq6056_attribute_group,
+	.read_raw = rtq6056_adc_read_raw,
+	.read_avail = rtq6056_adc_read_avail,
+	.write_raw = rtq6056_adc_write_raw,
+	.read_label = rtq6056_adc_read_label,
+};
+
+static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct rtq6056_priv *priv = iio_priv(indio_dev);
+	struct device *dev = priv->dev;
+	struct {
+		u16 vals[RTQ6056_MAX_CHANNEL];
+		s64 timestamp __aligned(8);
+	} data;
+	unsigned int raw;
+	int i = 0, bit, ret;
+
+	memset(&data, 0, sizeof(data));
+
+	pm_runtime_get_sync(dev);
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
+		unsigned int addr = rtq6056_channels[bit].address;
+
+		ret = regmap_read(priv->regmap, addr, &raw);
+		if (ret)
+			goto out;
+
+		data.vals[i++] = raw;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev));
+
+out:
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put(dev);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static void rtq6056_enter_shutdown_state(void *dev)
+{
+	struct rtq6056_priv *priv = dev_get_drvdata(dev);
+
+	/* Enter shutdown state */
+	regmap_field_write(priv->rm_fields[F_OPMODE], 0);
+}
+
+static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT:
+	case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RTQ6056_REG_CONFIG:
+	case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config rtq6056_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+	.max_register = RTQ6056_REG_DIEID,
+	.readable_reg = rtq6056_is_readable_reg,
+	.writeable_reg = rtq6056_is_writeable_reg,
+};
+
+static int rtq6056_probe(struct i2c_client *i2c)
+{
+	struct iio_dev *indio_dev;
+	struct rtq6056_priv *priv;
+	struct device *dev = &i2c->dev;
+	struct regmap *regmap;
+	unsigned int vendor_id, shunt_resistor_uohm;
+	int ret;
+
+	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EOPNOTSUPP;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	priv = iio_priv(indio_dev);
+	priv->dev = dev;
+	priv->vshuntct_us = priv->vbusct_us = 1037;
+	priv->avg_sample = 1;
+	i2c_set_clientdata(i2c, priv);
+
+	regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Failed to init regmap\n");
+
+	priv->regmap = regmap;
+
+	ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to get manufacturer info\n");
+
+	if (vendor_id != RTQ6056_VENDOR_ID)
+		return dev_err_probe(dev, -ENODEV,
+				     "Invalid vendor id 0x%04x\n", vendor_id);
+
+	ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields,
+					   rtq6056_reg_fields, F_MAX_FIELDS);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init regmap field\n");
+
+	/*
+	 * By default, configure average sample as 1, bus and shunt conversion
+	 * time as 1037 microsecond, and operating mode to all on.
+	 */
+	ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to enable continuous sensing\n");
+
+	ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev);
+	if (ret)
+		return ret;
+
+	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_mark_last_busy(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n");
+
+	/* By default, use 2000 micro-Ohm resistor */
+	shunt_resistor_uohm = 2000;
+	device_property_read_u32(dev, "shunt-resistor-micro-ohms",
+				 &shunt_resistor_uohm);
+
+	ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to init shunt resistor\n");
+
+	indio_dev->name = "rtq6056";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = rtq6056_channels;
+	indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels);
+	indio_dev->info = &rtq6056_info;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      rtq6056_buffer_trigger_handler,
+					      NULL);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to allocate iio trigger buffer\n");
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int rtq6056_runtime_suspend(struct device *dev)
+{
+	struct rtq6056_priv *priv = dev_get_drvdata(dev);
+
+	/* Configure to shutdown mode */
+	return regmap_field_write(priv->rm_fields[F_OPMODE], 0);
+}
+
+static int rtq6056_runtime_resume(struct device *dev)
+{
+	struct rtq6056_priv *priv = dev_get_drvdata(dev);
+	int sample_rdy_time_us, ret;
+
+	ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON);
+	if (ret)
+		return ret;
+
+	sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us;
+	sample_rdy_time_us *= priv->avg_sample;
+
+	usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100);
+
+	return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend,
+				 rtq6056_runtime_resume, NULL);
+
+static const struct of_device_id rtq6056_device_match[] = {
+	{ .compatible = "richtek,rtq6056" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rtq6056_device_match);
+
+static struct i2c_driver rtq6056_driver = {
+	.driver = {
+		.name = "rtq6056",
+		.of_match_table = rtq6056_device_match,
+		.pm = pm_ptr(&rtq6056_pm_ops),
+	},
+	.probe_new = rtq6056_probe,
+};
+module_i2c_driver(rtq6056_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RTQ6056 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 1ce52af3fe8b..81d5db91c67b 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -9,6 +9,7 @@
  *
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/interrupt.h>
 #include <linux/irqchip/chained_irq.h>
@@ -62,6 +63,7 @@ struct stm32_adc_priv;
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
+ * @ipid:	adc identification number
  * @has_syscfg: SYSCFG capability flags
  * @num_irqs:	number of interrupt lines
  * @num_adcs:   maximum number of ADC instances in the common registers
@@ -70,6 +72,7 @@ struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
 	u32 max_clk_rate_hz;
+	u32 ipid;
 	unsigned int has_syscfg;
 	unsigned int num_irqs;
 	unsigned int num_adcs;
@@ -78,6 +81,7 @@ struct stm32_adc_priv_cfg {
 /**
  * struct stm32_adc_priv - stm32 ADC core private data
  * @irq:		irq(s) for ADC block
+ * @nb_adc_max:		actual maximum number of instance per ADC block
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
@@ -95,6 +99,7 @@ struct stm32_adc_priv_cfg {
  */
 struct stm32_adc_priv {
 	int				irq[STM32_ADC_MAX_ADCS];
+	unsigned int			nb_adc_max;
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
@@ -354,7 +359,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	 * before invoking the interrupt handler (e.g. call ISR only for
 	 * IRQ-enabled ADCs).
 	 */
-	for (i = 0; i < priv->cfg->num_adcs; i++) {
+	for (i = 0; i < priv->nb_adc_max; i++) {
 		if ((status & priv->cfg->regs->eoc_msk[i] &&
 		     stm32_adc_eoc_enabled(priv, i)) ||
 		     (status & priv->cfg->regs->ovr_msk[i]))
@@ -424,7 +429,7 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
 	int hwirq;
 	unsigned int i;
 
-	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
+	for (hwirq = 0; hwirq < priv->nb_adc_max; hwirq++)
 		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
 	irq_domain_remove(priv->domain);
 
@@ -642,6 +647,49 @@ static int stm32_adc_core_switches_probe(struct device *dev,
 	return 0;
 }
 
+static int stm32_adc_probe_identification(struct platform_device *pdev,
+					  struct stm32_adc_priv *priv)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+	const char *compat;
+	int ret, count = 0;
+	u32 id, val;
+
+	if (!priv->cfg->ipid)
+		return 0;
+
+	id = FIELD_GET(STM32MP1_IPIDR_MASK,
+		       readl_relaxed(priv->common.base + STM32MP1_ADC_IPDR));
+	if (id != priv->cfg->ipid) {
+		dev_err(&pdev->dev, "Unexpected IP version: 0x%x", id);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(np, child) {
+		ret = of_property_read_string(child, "compatible", &compat);
+		if (ret)
+			continue;
+		/* Count child nodes with stm32 adc compatible */
+		if (strstr(compat, "st,stm32") && strstr(compat, "adc"))
+			count++;
+	}
+
+	val = readl_relaxed(priv->common.base + STM32MP1_ADC_HWCFGR0);
+	priv->nb_adc_max = FIELD_GET(STM32MP1_ADCNUM_MASK, val);
+	if (count > priv->nb_adc_max) {
+		dev_err(&pdev->dev, "Unexpected child number: %d", count);
+		return -EINVAL;
+	}
+
+	val = readl_relaxed(priv->common.base + STM32MP1_ADC_VERR);
+	dev_dbg(&pdev->dev, "ADC version: %lu.%lu\n",
+		FIELD_GET(STM32MP1_MAJREV_MASK, val),
+		FIELD_GET(STM32MP1_MINREV_MASK, val));
+
+	return 0;
+}
+
 static int stm32_adc_probe(struct platform_device *pdev)
 {
 	struct stm32_adc_priv *priv;
@@ -661,6 +709,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 
 	priv->cfg = (const struct stm32_adc_priv_cfg *)
 		of_match_device(dev->driver->of_match_table, dev)->data;
+	priv->nb_adc_max = priv->cfg->num_adcs;
 	spin_lock_init(&priv->common.lock);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -703,6 +752,10 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_pm_stop;
 
+	ret = stm32_adc_probe_identification(pdev, priv);
+	if (ret < 0)
+		goto err_hw_stop;
+
 	ret = regulator_get_voltage(priv->vref);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
@@ -811,8 +864,8 @@ static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
 	.clk_sel = stm32h7_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
 	.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
+	.ipid = STM32MP15_IPIDR_NUMBER,
 	.num_irqs = 2,
-	.num_adcs = 2,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {
diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
index faedf7a49555..2118ef63843d 100644
--- a/drivers/iio/adc/stm32-adc-core.h
+++ b/drivers/iio/adc/stm32-adc-core.h
@@ -24,6 +24,7 @@
  * | 0x300  |         Master & Slave common regs          |
  * --------------------------------------------------------
  */
+/* Maximum ADC instances number per ADC block for all supported SoCs */
 #define STM32_ADC_MAX_ADCS		3
 #define STM32_ADC_OFFSET		0x100
 #define STM32_ADCX_COMN_OFFSET		0x300
@@ -105,6 +106,12 @@
 /* STM32MP1 - ADC2 instance option register */
 #define STM32MP1_ADC2_OR		0xD0
 
+/* STM32MP1 - Identification registers */
+#define STM32MP1_ADC_HWCFGR0		0x3F0
+#define STM32MP1_ADC_VERR		0x3F4
+#define STM32MP1_ADC_IPDR		0x3F8
+#define STM32MP1_ADC_SIDR		0x3FC
+
 /* STM32H7 - common registers for all ADC instances */
 #define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
 #define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
@@ -181,6 +188,30 @@ enum stm32h7_adc_dmngt {
 /* STM32MP1_ADC2_OR - bit fields */
 #define STM32MP1_VDDCOREEN		BIT(0)
 
+/* STM32MP1_ADC_HWCFGR0 - bit fields */
+#define STM32MP1_ADCNUM_SHIFT		0
+#define STM32MP1_ADCNUM_MASK		GENMASK(3, 0)
+#define STM32MP1_MULPIPE_SHIFT		4
+#define STM32MP1_MULPIPE_MASK		GENMASK(7, 4)
+#define STM32MP1_OPBITS_SHIFT		8
+#define STM32MP1_OPBITS_MASK		GENMASK(11, 8)
+#define STM32MP1_IDLEVALUE_SHIFT	12
+#define STM32MP1_IDLEVALUE_MASK	GENMASK(15, 12)
+
+/* STM32MP1_ADC_VERR - bit fields */
+#define STM32MP1_MINREV_SHIFT		0
+#define STM32MP1_MINREV_MASK		GENMASK(3, 0)
+#define STM32MP1_MAJREV_SHIFT		4
+#define STM32MP1_MAJREV_MASK		GENMASK(7, 4)
+
+/* STM32MP1_ADC_IPDR - bit fields */
+#define STM32MP1_IPIDR_MASK		GENMASK(31, 0)
+
+/* STM32MP1_ADC_SIDR - bit fields */
+#define STM32MP1_SIDR_MASK		GENMASK(31, 0)
+
+#define STM32MP15_IPIDR_NUMBER		0x00110005
+
 /**
  * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
  * @base:		control registers base cpu addr
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 130e8dd6f0c8..6256977eb7f7 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -21,11 +21,11 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
 
 #include "stm32-adc-core.h"
 
@@ -241,6 +241,7 @@ struct stm32_adc_cfg {
  * @chan_name:		channel name array
  * @num_diff:		number of differential channels
  * @int_ch:		internal channel indexes array
+ * @nsmps:		number of channels with optional sample time
  */
 struct stm32_adc {
 	struct stm32_adc_common	*common;
@@ -267,6 +268,7 @@ struct stm32_adc {
 	char			chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ];
 	u32			num_diff;
 	int			int_ch[STM32_ADC_INT_CH_NB];
+	int			nsmps;
 };
 
 struct stm32_adc_diff_channel {
@@ -1520,8 +1522,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
-			      const struct of_phandle_args *iiospec)
+static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
+				  const struct fwnode_reference_args *iiospec)
 {
 	int i;
 
@@ -1575,7 +1577,7 @@ static const struct iio_info stm32_adc_iio_info = {
 	.hwfifo_set_watermark = stm32_adc_set_watermark,
 	.update_scan_mode = stm32_adc_update_scan_mode,
 	.debugfs_reg_access = stm32_adc_debugfs_reg_access,
-	.of_xlate = stm32_adc_of_xlate,
+	.fwnode_xlate = stm32_adc_fwnode_xlate,
 };
 
 static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
@@ -1772,14 +1774,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
 	{},
 };
 
-static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
+static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
 {
-	struct device_node *node = indio_dev->dev.of_node;
+	struct device *dev = &indio_dev->dev;
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	unsigned int i;
 	u32 res;
 
-	if (of_property_read_u32(node, "assigned-resolution-bits", &res))
+	if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
 		res = adc->cfg->adc_info->resolutions[0];
 
 	for (i = 0; i < adc->cfg->adc_info->num_res; i++)
@@ -1863,11 +1865,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
 
 static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
 {
-	struct device_node *node = indio_dev->dev.of_node;
+	struct device *dev = &indio_dev->dev;
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	int num_channels = 0, ret;
 
-	ret = of_property_count_u32_elems(node, "st,adc-channels");
+	ret = device_property_count_u32(dev, "st,adc-channels");
 	if (ret > adc_info->max_channels) {
 		dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
 		return -EINVAL;
@@ -1875,8 +1877,15 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 		num_channels += ret;
 	}
 
-	ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
-					      sizeof(struct stm32_adc_diff_channel));
+	/*
+	 * each st,adc-diff-channels is a group of 2 u32 so we divide @ret
+	 * to get the *real* number of channels.
+	 */
+	ret = device_property_count_u32(dev, "st,adc-diff-channels");
+	if (ret < 0)
+		return ret;
+
+	ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
 	if (ret > adc_info->max_channels) {
 		dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
 		return -EINVAL;
@@ -1886,8 +1895,8 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 	}
 
 	/* Optional sample time is provided either for each, or all channels */
-	ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
-	if (ret > 1 && ret != num_channels) {
+	adc->nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
+	if (adc->nsmps > 1 && adc->nsmps != num_channels) {
 		dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
 		return -EINVAL;
 	}
@@ -1897,21 +1906,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 
 static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
 				      struct stm32_adc *adc,
-				      struct iio_chan_spec *channels)
+				      struct iio_chan_spec *channels,
+				      int nchans)
 {
-	struct device_node *node = indio_dev->dev.of_node;
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
+	struct device *dev = &indio_dev->dev;
 	u32 num_diff = adc->num_diff;
 	int size = num_diff * sizeof(*diff) / sizeof(u32);
-	int scan_index = 0, val, ret, i;
-	struct property *prop;
-	const __be32 *cur;
-	u32 smp = 0;
+	int scan_index = 0, ret, i, c;
+	u32 smp = 0, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
 
 	if (num_diff) {
-		ret = of_property_read_u32_array(node, "st,adc-diff-channels",
-						 (u32 *)diff, size);
+		ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
+						     (u32 *)diff, size);
 		if (ret) {
 			dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
 			return ret;
@@ -1932,32 +1940,47 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
 		}
 	}
 
-	of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
-		if (val >= adc_info->max_channels) {
-			dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
+	ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
+					     nchans);
+	if (ret)
+		return ret;
+
+	for (c = 0; c < nchans; c++) {
+		if (chans[c] >= adc_info->max_channels) {
+			dev_err(&indio_dev->dev, "Invalid channel %d\n",
+				chans[c]);
 			return -EINVAL;
 		}
 
 		/* Channel can't be configured both as single-ended & diff */
 		for (i = 0; i < num_diff; i++) {
-			if (val == diff[i].vinp) {
-				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	val);
+			if (chans[c] == diff[i].vinp) {
+				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	chans[c]);
 				return -EINVAL;
 			}
 		}
-		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
-					0, scan_index, false);
+		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
+					chans[c], 0, scan_index, false);
 		scan_index++;
 	}
 
+	if (adc->nsmps > 0) {
+		ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
+						     smps, adc->nsmps);
+		if (ret)
+			return ret;
+	}
+
 	for (i = 0; i < scan_index; i++) {
 		/*
-		 * Using of_property_read_u32_index(), smp value will only be
-		 * modified if valid u32 value can be decoded. This allows to
-		 * get either no value, 1 shared value for all indexes, or one
-		 * value per channel.
+		 * This check is used with the above logic so that smp value
+		 * will only be modified if valid u32 value can be decoded. This
+		 * allows to get either no value, 1 shared value for all indexes,
+		 * or one value per channel. The point is to have the same
+		 * behavior as 'of_property_read_u32_index()'.
 		 */
-		of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
+		if (i < adc->nsmps)
+			smp = smps[i];
 
 		/* Prepare sampling time settings */
 		stm32_adc_smpr_init(adc, channels[i].channel, smp);
@@ -2005,22 +2028,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 				       struct stm32_adc *adc,
 				       struct iio_chan_spec *channels)
 {
-	struct device_node *node = indio_dev->dev.of_node;
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
-	struct device_node *child;
+	struct fwnode_handle *child;
 	const char *name;
 	int val, scan_index = 0, ret;
 	bool differential;
 	u32 vin[2];
 
-	for_each_available_child_of_node(node, child) {
-		ret = of_property_read_u32(child, "reg", &val);
+	device_for_each_child_node(&indio_dev->dev, child) {
+		ret = fwnode_property_read_u32(child, "reg", &val);
 		if (ret) {
 			dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
 			goto err;
 		}
 
-		ret = of_property_read_string(child, "label", &name);
+		ret = fwnode_property_read_string(child, "label", &name);
 		/* label is optional */
 		if (!ret) {
 			if (strlen(name) >= STM32_ADC_CH_SZ) {
@@ -2047,7 +2069,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 		}
 
 		differential = false;
-		ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
+		ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
 		/* diff-channels is optional */
 		if (!ret) {
 			differential = true;
@@ -2064,7 +2086,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
 					vin[1], scan_index, differential);
 
-		ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
+		ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
 		/* st,min-sample-time-ns is optional */
 		if (!ret) {
 			stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
@@ -2082,14 +2104,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 	return scan_index;
 
 err:
-	of_node_put(child);
+	fwnode_handle_put(child);
 
 	return ret;
 }
 
-static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
+static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
 {
-	struct device_node *node = indio_dev->dev.of_node;
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
 	struct iio_chan_spec *channels;
@@ -2099,7 +2120,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
 	for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
 		adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
 
-	num_channels = of_get_available_child_count(node);
+	num_channels = device_get_child_node_count(&indio_dev->dev);
 	/* If no channels have been found, fallback to channels legacy properties. */
 	if (!num_channels) {
 		legacy = true;
@@ -2130,7 +2151,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
 		return -ENOMEM;
 
 	if (legacy)
-		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
+		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
+						 num_channels);
 	else
 		ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
 	if (ret < 0)
@@ -2212,9 +2234,6 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	bool timestamping = false;
 	int ret;
 
-	if (!pdev->dev.of_node)
-		return -ENODEV;
-
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -2223,17 +2242,16 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	adc->common = dev_get_drvdata(pdev->dev.parent);
 	spin_lock_init(&adc->lock);
 	init_completion(&adc->completion);
-	adc->cfg = (const struct stm32_adc_cfg *)
-		of_match_device(dev->driver->of_match_table, dev)->data;
+	adc->cfg = device_get_match_data(dev);
 
 	indio_dev->name = dev_name(&pdev->dev);
-	indio_dev->dev.of_node = pdev->dev.of_node;
+	device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
 	indio_dev->info = &stm32_adc_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
 
 	platform_set_drvdata(pdev, indio_dev);
 
-	ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
+	ret = device_property_read_u32(dev, "reg", &adc->offset);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "missing reg property\n");
 		return -EINVAL;
@@ -2262,7 +2280,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = stm32_adc_of_get_resolution(indio_dev);
+	ret = stm32_adc_fw_get_resolution(indio_dev);
 	if (ret < 0)
 		return ret;
 
@@ -2279,7 +2297,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 		timestamping = true;
 	}
 
-	ret = stm32_adc_chan_of_init(indio_dev, timestamping);
+	ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
 	if (ret < 0)
 		goto err_dma_disable;
 
diff --git a/drivers/iio/adc/ti-ads131e08.c b/drivers/iio/adc/ti-ads131e08.c
index 32237cacc9a3..5235a93f28bc 100644
--- a/drivers/iio/adc/ti-ads131e08.c
+++ b/drivers/iio/adc/ti-ads131e08.c
@@ -797,13 +797,6 @@ static void ads131e08_regulator_disable(void *data)
 	regulator_disable(st->vref_reg);
 }
 
-static void ads131e08_clk_disable(void *data)
-{
-	struct ads131e08_state *st = data;
-
-	clk_disable_unprepare(st->adc_clk);
-}
-
 static int ads131e08_probe(struct spi_device *spi)
 {
 	const struct ads131e08_info *info;
@@ -896,21 +889,11 @@ static int ads131e08_probe(struct spi_device *spi)
 		st->vref_reg = NULL;
 	}
 
-	st->adc_clk = devm_clk_get(&spi->dev, "adc-clk");
+	st->adc_clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
 	if (IS_ERR(st->adc_clk))
 		return dev_err_probe(&spi->dev, PTR_ERR(st->adc_clk),
 				     "failed to get the ADC clock\n");
 
-	ret = clk_prepare_enable(st->adc_clk);
-	if (ret) {
-		dev_err(&spi->dev, "failed to prepare/enable the ADC clock\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(&spi->dev, ads131e08_clk_disable, st);
-	if (ret)
-		return ret;
-
 	adc_clk_hz = clk_get_rate(st->adc_clk);
 	if (!adc_clk_hz) {
 		dev_err(&spi->dev, "failed to get the ADC clock rate\n");
diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
index 0d9436a69cbf..1bbb51a6683c 100644
--- a/drivers/iio/adc/ti-tsc2046.c
+++ b/drivers/iio/adc/ti-tsc2046.c
@@ -8,7 +8,9 @@
 #include <linux/bitfield.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
+#include <linux/units.h>
 
 #include <asm/unaligned.h>
 
@@ -139,6 +141,7 @@ enum tsc2046_state {
 struct tsc2046_adc_priv {
 	struct spi_device *spi;
 	const struct tsc2046_adc_dcfg *dcfg;
+	struct regulator *vref_reg;
 
 	struct iio_trigger *trig;
 	struct hrtimer trig_timer;
@@ -173,6 +176,7 @@ struct tsc2046_adc_priv {
 	u32 scan_interval_us;
 	u32 time_per_scan_us;
 	u32 time_per_bit_ns;
+	unsigned int vref_mv;
 
 	struct tsc2046_adc_ch_cfg ch_cfg[TI_TSC2046_MAX_CHAN];
 };
@@ -252,7 +256,9 @@ static u8 tsc2046_adc_get_cmd(struct tsc2046_adc_priv *priv, int ch_idx,
 	case TI_TSC2046_ADDR_AUX:
 	case TI_TSC2046_ADDR_VBAT:
 	case TI_TSC2046_ADDR_TEMP0:
-		pd |= TI_TSC2046_SER | TI_TSC2046_PD1_VREF_ON;
+		pd |= TI_TSC2046_SER;
+		if (!priv->vref_reg)
+			pd |= TI_TSC2046_PD1_VREF_ON;
 	}
 
 	return TI_TSC2046_START | FIELD_PREP(TI_TSC2046_ADDR, ch_idx) | pd;
@@ -468,7 +474,7 @@ static int tsc2046_adc_read_raw(struct iio_dev *indio_dev,
 		 * So, it is better to use external voltage-divider driver
 		 * instead, which is calculating complete chain.
 		 */
-		*val = TI_TSC2046_INT_VREF;
+		*val = priv->vref_mv;
 		*val2 = chan->scan_type.realbits;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	}
@@ -740,6 +746,49 @@ static void tsc2046_adc_parse_fwnode(struct tsc2046_adc_priv *priv)
 	}
 }
 
+static void tsc2046_adc_regulator_disable(void *data)
+{
+	struct tsc2046_adc_priv *priv = data;
+
+	regulator_disable(priv->vref_reg);
+}
+
+static int tsc2046_adc_configure_regulator(struct tsc2046_adc_priv *priv)
+{
+	struct device *dev = &priv->spi->dev;
+	int ret;
+
+	priv->vref_reg = devm_regulator_get_optional(dev, "vref");
+	if (IS_ERR(priv->vref_reg)) {
+		/* If regulator exists but can't be get, return an error */
+		if (PTR_ERR(priv->vref_reg) != -ENODEV)
+			return PTR_ERR(priv->vref_reg);
+		priv->vref_reg = NULL;
+	}
+	if (!priv->vref_reg) {
+		/* Use internal reference */
+		priv->vref_mv = TI_TSC2046_INT_VREF;
+		return 0;
+	}
+
+	ret = regulator_enable(priv->vref_reg);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, tsc2046_adc_regulator_disable,
+				       priv);
+	if (ret)
+		return ret;
+
+	ret = regulator_get_voltage(priv->vref_reg);
+	if (ret < 0)
+		return ret;
+
+	priv->vref_mv = ret / MILLI;
+
+	return 0;
+}
+
 static int tsc2046_adc_probe(struct spi_device *spi)
 {
 	const struct tsc2046_adc_dcfg *dcfg;
@@ -756,6 +805,11 @@ static int tsc2046_adc_probe(struct spi_device *spi)
 	}
 
 	dcfg = device_get_match_data(dev);
+	if (!dcfg) {
+		const struct spi_device_id *id = spi_get_device_id(spi);
+
+		dcfg = (const struct tsc2046_adc_dcfg *)id->driver_data;
+	}
 	if (!dcfg)
 		return -EINVAL;
 
@@ -781,6 +835,10 @@ static int tsc2046_adc_probe(struct spi_device *spi)
 	indio_dev->num_channels = dcfg->num_channels;
 	indio_dev->info = &tsc2046_adc_info;
 
+	ret = tsc2046_adc_configure_regulator(priv);
+	if (ret)
+		return ret;
+
 	tsc2046_adc_parse_fwnode(priv);
 
 	ret = tsc2046_adc_setup_spi_msg(priv);
@@ -833,11 +891,18 @@ static const struct of_device_id ads7950_of_table[] = {
 };
 MODULE_DEVICE_TABLE(of, ads7950_of_table);
 
+static const struct spi_device_id tsc2046_adc_spi_ids[] = {
+	{ "tsc2046e-adc", (unsigned long)&tsc2046_adc_dcfg_tsc2046e },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, tsc2046_adc_spi_ids);
+
 static struct spi_driver tsc2046_adc_driver = {
 	.driver = {
 		.name = "tsc2046",
 		.of_match_table = ads7950_of_table,
 	},
+	.id_table = tsc2046_adc_spi_ids,
 	.probe = tsc2046_adc_probe,
 };
 module_spi_driver(tsc2046_adc_driver);
diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c
index 9cd2713146e5..5b4bdf3a26bb 100644
--- a/drivers/iio/adc/xilinx-ams.c
+++ b/drivers/iio/adc/xilinx-ams.c
@@ -1351,11 +1351,6 @@ static const struct of_device_id ams_of_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, ams_of_match_table);
 
-static void ams_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int ams_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
@@ -1380,18 +1375,10 @@ static int ams_probe(struct platform_device *pdev)
 	if (IS_ERR(ams->base))
 		return PTR_ERR(ams->base);
 
-	ams->clk = devm_clk_get(&pdev->dev, NULL);
+	ams->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(ams->clk))
 		return PTR_ERR(ams->clk);
 
-	ret = clk_prepare_enable(ams->clk);
-	if (ret < 0)
-		return ret;
-
-	ret = devm_add_action_or_reset(&pdev->dev, ams_clk_disable_unprepare, ams->clk);
-	if (ret < 0)
-		return ret;
-
 	ret = devm_delayed_work_autocancel(&pdev->dev, &ams->ams_unmask_work,
 					   ams_unmask_worker);
 	if (ret < 0)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 1b247722ba25..292f2892d223 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1296,13 +1296,6 @@ static const char * const xadc_type_names[] = {
 	[XADC_TYPE_US] = "xilinx-system-monitor",
 };
 
-static void xadc_clk_disable_unprepare(void *data)
-{
-	struct clk *clk = data;
-
-	clk_disable_unprepare(clk);
-}
-
 static void xadc_cancel_delayed_work(void *data)
 {
 	struct delayed_work *work = data;
@@ -1374,19 +1367,10 @@ static int xadc_probe(struct platform_device *pdev)
 		}
 	}
 
-	xadc->clk = devm_clk_get(dev, NULL);
+	xadc->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(xadc->clk))
 		return PTR_ERR(xadc->clk);
 
-	ret = clk_prepare_enable(xadc->clk);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(dev,
-				       xadc_clk_disable_unprepare, xadc->clk);
-	if (ret)
-		return ret;
-
 	/*
 	 * Make sure not to exceed the maximum samplerate since otherwise the
 	 * resulting interrupt storm will soft-lock the system.
diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
index 138492362f20..fcf6d2269bfc 100644
--- a/drivers/iio/addac/Kconfig
+++ b/drivers/iio/addac/Kconfig
@@ -17,4 +17,20 @@ config AD74413R
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad74413r.
 
+config STX104
+	tristate "Apex Embedded Systems STX104 driver"
+	depends on PC104 && X86
+	select ISA_BUS_API
+	select GPIOLIB
+	help
+	  Say yes here to build support for the Apex Embedded Systems STX104
+	  integrated analog PC/104 card.
+
+	  This driver supports the 16 channels of single-ended (8 channels of
+	  differential) analog inputs, 2 channels of analog output, 4 digital
+	  inputs, and 4 digital outputs provided by the STX104.
+
+	  The base port addresses for the devices may be configured via the base
+	  array module parameter.
+
 endmenu
diff --git a/drivers/iio/addac/Makefile b/drivers/iio/addac/Makefile
index cfd4bbe64ad3..17de20ef0d8e 100644
--- a/drivers/iio/addac/Makefile
+++ b/drivers/iio/addac/Makefile
@@ -5,3 +5,4 @@
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD74413R) += ad74413r.o
+obj-$(CONFIG_STX104) += stx104.o
diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/addac/stx104.c
index 48a91a95e597..48a91a95e597 100644
--- a/drivers/iio/adc/stx104.c
+++ b/drivers/iio/addac/stx104.c
diff --git a/drivers/iio/cdc/Kconfig b/drivers/iio/cdc/Kconfig
index 5e3319a3ff48..e0a5ce66a984 100644
--- a/drivers/iio/cdc/Kconfig
+++ b/drivers/iio/cdc/Kconfig
@@ -14,4 +14,14 @@ config AD7150
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7150.
 
+config AD7746
+	tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
+	depends on I2C
+	help
+	  Say yes here to build support for Analog Devices capacitive sensors.
+	  (AD7745, AD7746, AD7747) Provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7746.
+
 endmenu
diff --git a/drivers/iio/cdc/Makefile b/drivers/iio/cdc/Makefile
index ee490637b032..41db756d8020 100644
--- a/drivers/iio/cdc/Makefile
+++ b/drivers/iio/cdc/Makefile
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_AD7150) += ad7150.o
+obj-$(CONFIG_AD7746) += ad7746.o
diff --git a/drivers/iio/cdc/ad7746.c b/drivers/iio/cdc/ad7746.c
new file mode 100644
index 000000000000..b266f5328140
--- /dev/null
+++ b/drivers/iio/cdc/ad7746.c
@@ -0,0 +1,820 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/sysfs.h>
+
+#include <asm/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* AD7746 Register Definition */
+
+#define AD7746_REG_STATUS		0
+#define AD7746_REG_CAP_DATA_HIGH	1
+#define AD7746_REG_VT_DATA_HIGH		4
+#define AD7746_REG_CAP_SETUP		7
+#define AD7746_REG_VT_SETUP		8
+#define AD7746_REG_EXC_SETUP		9
+#define AD7746_REG_CFG			10
+#define AD7746_REG_CAPDACA		11
+#define AD7746_REG_CAPDACB		12
+#define AD7746_REG_CAP_OFFH		13
+#define AD7746_REG_CAP_GAINH		15
+#define AD7746_REG_VOLT_GAINH		17
+
+/* Status Register Bit Designations (AD7746_REG_STATUS) */
+#define AD7746_STATUS_EXCERR		BIT(3)
+#define AD7746_STATUS_RDY		BIT(2)
+#define AD7746_STATUS_RDYVT		BIT(1)
+#define AD7746_STATUS_RDYCAP		BIT(0)
+
+/* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
+#define AD7746_CAPSETUP_CAPEN		BIT(7)
+#define AD7746_CAPSETUP_CIN2		BIT(6) /* AD7746 only */
+#define AD7746_CAPSETUP_CAPDIFF		BIT(5)
+#define AD7746_CAPSETUP_CACHOP		BIT(0)
+
+/* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
+#define AD7746_VTSETUP_VTEN		BIT(7)
+#define AD7746_VTSETUP_VTMD_MASK	GENMASK(6, 5)
+#define AD7746_VTSETUP_VTMD_INT_TEMP	0
+#define AD7746_VTSETUP_VTMD_EXT_TEMP	1
+#define AD7746_VTSETUP_VTMD_VDD_MON	2
+#define AD7746_VTSETUP_VTMD_EXT_VIN	3
+#define AD7746_VTSETUP_EXTREF		BIT(4)
+#define AD7746_VTSETUP_VTSHORT		BIT(1)
+#define AD7746_VTSETUP_VTCHOP		BIT(0)
+
+/* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
+#define AD7746_EXCSETUP_CLKCTRL		BIT(7)
+#define AD7746_EXCSETUP_EXCON		BIT(6)
+#define AD7746_EXCSETUP_EXCB		BIT(5)
+#define AD7746_EXCSETUP_NEXCB		BIT(4)
+#define AD7746_EXCSETUP_EXCA		BIT(3)
+#define AD7746_EXCSETUP_NEXCA		BIT(2)
+#define AD7746_EXCSETUP_EXCLVL_MASK	GENMASK(1, 0)
+
+/* Config Register Bit Designations (AD7746_REG_CFG) */
+#define AD7746_CONF_VTFS_MASK		GENMASK(7, 6)
+#define AD7746_CONF_CAPFS_MASK		GENMASK(5, 3)
+#define AD7746_CONF_MODE_MASK		GENMASK(2, 0)
+#define AD7746_CONF_MODE_IDLE		0
+#define AD7746_CONF_MODE_CONT_CONV	1
+#define AD7746_CONF_MODE_SINGLE_CONV	2
+#define AD7746_CONF_MODE_PWRDN		3
+#define AD7746_CONF_MODE_OFFS_CAL	5
+#define AD7746_CONF_MODE_GAIN_CAL	6
+
+/* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
+#define AD7746_CAPDAC_DACEN		BIT(7)
+#define AD7746_CAPDAC_DACP_MASK		GENMASK(6, 0)
+
+struct ad7746_chip_info {
+	struct i2c_client *client;
+	struct mutex lock; /* protect sensor state */
+	/*
+	 * Capacitive channel digital filter setup;
+	 * conversion time/update rate setup per channel
+	 */
+	u8	config;
+	u8	cap_setup;
+	u8	vt_setup;
+	u8	capdac[2][2];
+	s8	capdac_set;
+};
+
+enum ad7746_chan {
+	VIN,
+	VIN_VDD,
+	TEMP_INT,
+	TEMP_EXT,
+	CIN1,
+	CIN1_DIFF,
+	CIN2,
+	CIN2_DIFF,
+};
+
+struct ad7746_chan_info {
+	u8 addr;
+	union {
+		u8 vtmd;
+		struct { /* CAP SETUP fields */
+			unsigned int cin2 : 1;
+			unsigned int capdiff : 1;
+		};
+	};
+};
+
+static const struct ad7746_chan_info ad7746_chan_info[] = {
+	[VIN] = {
+		.addr = AD7746_REG_VT_DATA_HIGH,
+		.vtmd = AD7746_VTSETUP_VTMD_EXT_VIN,
+	},
+	[VIN_VDD] = {
+		.addr = AD7746_REG_VT_DATA_HIGH,
+		.vtmd = AD7746_VTSETUP_VTMD_VDD_MON,
+	},
+	[TEMP_INT] = {
+		.addr = AD7746_REG_VT_DATA_HIGH,
+		.vtmd = AD7746_VTSETUP_VTMD_INT_TEMP,
+	},
+	[TEMP_EXT] = {
+		.addr = AD7746_REG_VT_DATA_HIGH,
+		.vtmd = AD7746_VTSETUP_VTMD_EXT_TEMP,
+	},
+	[CIN1] = {
+		.addr = AD7746_REG_CAP_DATA_HIGH,
+	},
+	[CIN1_DIFF] = {
+		.addr =  AD7746_REG_CAP_DATA_HIGH,
+		.capdiff = 1,
+	},
+	[CIN2] = {
+		.addr = AD7746_REG_CAP_DATA_HIGH,
+		.cin2 = 1,
+	},
+	[CIN2_DIFF] = {
+		.addr = AD7746_REG_CAP_DATA_HIGH,
+		.cin2 = 1,
+		.capdiff = 1,
+	},
+};
+
+static const struct iio_chan_spec ad7746_channels[] = {
+	[VIN] = {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = VIN,
+	},
+	[VIN_VDD] = {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "supply",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = VIN_VDD,
+	},
+	[TEMP_INT] = {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.address = TEMP_INT,
+	},
+	[TEMP_EXT] = {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.address = TEMP_EXT,
+	},
+	[CIN1] = {
+		.type = IIO_CAPACITANCE,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = CIN1,
+	},
+	[CIN1_DIFF] = {
+		.type = IIO_CAPACITANCE,
+		.differential = 1,
+		.indexed = 1,
+		.channel = 0,
+		.channel2 = 2,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = CIN1_DIFF,
+	},
+	[CIN2] = {
+		.type = IIO_CAPACITANCE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = CIN2,
+	},
+	[CIN2_DIFF] = {
+		.type = IIO_CAPACITANCE,
+		.differential = 1,
+		.indexed = 1,
+		.channel = 1,
+		.channel2 = 3,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = CIN2_DIFF,
+	}
+};
+
+/* Values are Update Rate (Hz), Conversion Time (ms) + 1*/
+static const unsigned char ad7746_vt_filter_rate_table[][2] = {
+	{ 50, 20 + 1 }, { 31, 32 + 1 }, { 16, 62 + 1 }, { 8, 122 + 1 },
+};
+
+static const unsigned char ad7746_cap_filter_rate_table[][2] = {
+	{ 91, 11 + 1 }, { 84, 12 + 1 }, { 50, 20 + 1 }, { 26, 38 + 1 },
+	{ 16, 62 + 1 }, { 13, 77 + 1 }, { 11, 92 + 1 }, { 9, 110 + 1 },
+};
+
+static int ad7746_set_capdac(struct ad7746_chip_info *chip, int channel)
+{
+	int ret = i2c_smbus_write_byte_data(chip->client,
+					    AD7746_REG_CAPDACA,
+					    chip->capdac[channel][0]);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(chip->client,
+					  AD7746_REG_CAPDACB,
+					  chip->capdac[channel][1]);
+}
+
+static int ad7746_select_channel(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan)
+{
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	u8 vt_setup, cap_setup;
+	int ret, delay, idx;
+
+	switch (chan->type) {
+	case IIO_CAPACITANCE:
+		cap_setup = FIELD_PREP(AD7746_CAPSETUP_CIN2,
+				       ad7746_chan_info[chan->address].cin2) |
+			FIELD_PREP(AD7746_CAPSETUP_CAPDIFF,
+				   ad7746_chan_info[chan->address].capdiff) |
+			FIELD_PREP(AD7746_CAPSETUP_CAPEN, 1);
+		vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN;
+		idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config);
+		delay = ad7746_cap_filter_rate_table[idx][1];
+
+		ret = ad7746_set_capdac(chip, chan->channel);
+		if (ret < 0)
+			return ret;
+
+		if (chip->capdac_set != chan->channel)
+			chip->capdac_set = chan->channel;
+		break;
+	case IIO_VOLTAGE:
+	case IIO_TEMP:
+		vt_setup = FIELD_PREP(AD7746_VTSETUP_VTMD_MASK,
+				      ad7746_chan_info[chan->address].vtmd) |
+			FIELD_PREP(AD7746_VTSETUP_VTEN, 1);
+		cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN;
+		idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config);
+		delay = ad7746_cap_filter_rate_table[idx][1];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (chip->cap_setup != cap_setup) {
+		ret = i2c_smbus_write_byte_data(chip->client,
+						AD7746_REG_CAP_SETUP,
+						cap_setup);
+		if (ret < 0)
+			return ret;
+
+		chip->cap_setup = cap_setup;
+	}
+
+	if (chip->vt_setup != vt_setup) {
+		ret = i2c_smbus_write_byte_data(chip->client,
+						AD7746_REG_VT_SETUP,
+						vt_setup);
+		if (ret < 0)
+			return ret;
+
+		chip->vt_setup = vt_setup;
+	}
+
+	return delay;
+}
+
+static inline ssize_t ad7746_start_calib(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len,
+					 u8 regval)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	int ret, timeout = 10;
+	bool doit;
+
+	ret = kstrtobool(buf, &doit);
+	if (ret < 0)
+		return ret;
+
+	if (!doit)
+		return 0;
+
+	mutex_lock(&chip->lock);
+	regval |= chip->config;
+	ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
+	if (ret < 0)
+		goto unlock;
+
+	do {
+		msleep(20);
+		ret = i2c_smbus_read_byte_data(chip->client, AD7746_REG_CFG);
+		if (ret < 0)
+			goto unlock;
+
+	} while ((ret == regval) && timeout--);
+
+	mutex_unlock(&chip->lock);
+
+	return len;
+
+unlock:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static ssize_t ad7746_start_offset_calib(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	int ret = ad7746_select_channel(indio_dev,
+			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
+	if (ret < 0)
+		return ret;
+
+	return ad7746_start_calib(dev, attr, buf, len,
+				  FIELD_PREP(AD7746_CONF_MODE_MASK,
+					     AD7746_CONF_MODE_OFFS_CAL));
+}
+
+static ssize_t ad7746_start_gain_calib(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	int ret = ad7746_select_channel(indio_dev,
+			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
+	if (ret < 0)
+		return ret;
+
+	return ad7746_start_calib(dev, attr, buf, len,
+				  FIELD_PREP(AD7746_CONF_MODE_MASK,
+					     AD7746_CONF_MODE_GAIN_CAL));
+}
+
+static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration,
+		       0200, NULL, ad7746_start_offset_calib, CIN1);
+static IIO_DEVICE_ATTR(in_capacitance1_calibbias_calibration,
+		       0200, NULL, ad7746_start_offset_calib, CIN2);
+static IIO_DEVICE_ATTR(in_capacitance0_calibscale_calibration,
+		       0200, NULL, ad7746_start_gain_calib, CIN1);
+static IIO_DEVICE_ATTR(in_capacitance1_calibscale_calibration,
+		       0200, NULL, ad7746_start_gain_calib, CIN2);
+static IIO_DEVICE_ATTR(in_voltage0_calibscale_calibration,
+		       0200, NULL, ad7746_start_gain_calib, VIN);
+
+static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip,
+					      int val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ad7746_cap_filter_rate_table); i++)
+		if (val >= ad7746_cap_filter_rate_table[i][0])
+			break;
+
+	if (i >= ARRAY_SIZE(ad7746_cap_filter_rate_table))
+		i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1;
+
+	chip->config &= ~AD7746_CONF_CAPFS_MASK;
+	chip->config |= FIELD_PREP(AD7746_CONF_CAPFS_MASK, i);
+
+	return 0;
+}
+
+static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip,
+					     int val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ad7746_vt_filter_rate_table); i++)
+		if (val >= ad7746_vt_filter_rate_table[i][0])
+			break;
+
+	if (i >= ARRAY_SIZE(ad7746_vt_filter_rate_table))
+		i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1;
+
+	chip->config &= ~AD7746_CONF_VTFS_MASK;
+	chip->config |= FIELD_PREP(AD7746_CONF_VTFS_MASK, i);
+
+	return 0;
+}
+
+static struct attribute *ad7746_attributes[] = {
+	&iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr,
+	&iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr,
+	&iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr,
+	&iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr,
+	&iio_dev_attr_in_voltage0_calibscale_calibration.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7746_attribute_group = {
+	.attrs = ad7746_attributes,
+};
+
+static int ad7746_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	int ret, reg;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (val != 1)
+			return -EINVAL;
+
+		val = (val2 * 1024) / 15625;
+
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			reg = AD7746_REG_CAP_GAINH;
+			break;
+		case IIO_VOLTAGE:
+			reg = AD7746_REG_VOLT_GAINH;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		mutex_lock(&chip->lock);
+		ret = i2c_smbus_write_word_swapped(chip->client, reg, val);
+		mutex_unlock(&chip->lock);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (val < 0 || val > 0xFFFF)
+			return -EINVAL;
+
+		mutex_lock(&chip->lock);
+		ret = i2c_smbus_write_word_swapped(chip->client,
+						   AD7746_REG_CAP_OFFH, val);
+		mutex_unlock(&chip->lock);
+		if (ret < 0)
+			return ret;
+
+		return 0;
+	case IIO_CHAN_INFO_OFFSET:
+	case IIO_CHAN_INFO_ZEROPOINT:
+		if (val < 0 || val > 43008000) /* 21pF */
+			return -EINVAL;
+
+		/*
+		 * CAPDAC Scale = 21pF_typ / 127
+		 * CIN Scale = 8.192pF / 2^24
+		 * Offset Scale = CAPDAC Scale / CIN Scale = 338646
+		 */
+
+		val /= 338646;
+		mutex_lock(&chip->lock);
+		chip->capdac[chan->channel][chan->differential] = val > 0 ?
+			FIELD_PREP(AD7746_CAPDAC_DACP_MASK, val) | AD7746_CAPDAC_DACEN : 0;
+
+		ret = ad7746_set_capdac(chip, chan->channel);
+		if (ret < 0) {
+			mutex_unlock(&chip->lock);
+			return ret;
+		}
+
+		chip->capdac_set = chan->channel;
+		mutex_unlock(&chip->lock);
+
+		return 0;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			mutex_lock(&chip->lock);
+			ret = ad7746_store_cap_filter_rate_setup(chip, val);
+			mutex_unlock(&chip->lock);
+			return ret;
+		case IIO_VOLTAGE:
+			mutex_lock(&chip->lock);
+			ret = ad7746_store_vt_filter_rate_setup(chip, val);
+			mutex_unlock(&chip->lock);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const int ad7746_v_samp_freq[] = { 50, 31, 16, 8, };
+static const int ad7746_cap_samp_freq[] = { 91, 84, 50, 26, 16, 13, 11, 9, };
+
+static int ad7746_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, const int **vals,
+			     int *type, int *length, long mask)
+{
+	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+		return -EINVAL;
+
+	switch (chan->type) {
+	case IIO_VOLTAGE:
+		*vals = ad7746_v_samp_freq;
+		*length = ARRAY_SIZE(ad7746_v_samp_freq);
+		break;
+	case IIO_CAPACITANCE:
+		*vals = ad7746_cap_samp_freq;
+		*length = ARRAY_SIZE(ad7746_cap_samp_freq);
+		break;
+	default:
+		return -EINVAL;
+	}
+	*type = IIO_VAL_INT;
+	return IIO_AVAIL_LIST;
+}
+
+static int ad7746_read_channel(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val)
+{
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	int ret, delay;
+	u8 data[3];
+	u8 regval;
+
+	ret = ad7746_select_channel(indio_dev, chan);
+	if (ret < 0)
+		return ret;
+	delay = ret;
+
+	regval = chip->config | FIELD_PREP(AD7746_CONF_MODE_MASK,
+					   AD7746_CONF_MODE_SINGLE_CONV);
+	ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
+	if (ret < 0)
+		return ret;
+
+	msleep(delay);
+	/* Now read the actual register */
+	ret = i2c_smbus_read_i2c_block_data(chip->client,
+					    ad7746_chan_info[chan->address].addr,
+					    sizeof(data), data);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Offset applied internally becaue the _offset userspace interface is
+	 * needed for the CAP DACs which apply a controllable offset.
+	 */
+	*val = get_unaligned_be24(data) - 0x800000;
+
+	return 0;
+}
+
+static int ad7746_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2,
+			   long mask)
+{
+	struct ad7746_chip_info *chip = iio_priv(indio_dev);
+	int ret, idx;
+	u8 reg;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&chip->lock);
+		ret = ad7746_read_channel(indio_dev, chan, val);
+		mutex_unlock(&chip->lock);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			reg = AD7746_REG_CAP_GAINH;
+			break;
+		case IIO_VOLTAGE:
+			reg = AD7746_REG_VOLT_GAINH;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		mutex_lock(&chip->lock);
+		ret = i2c_smbus_read_word_swapped(chip->client, reg);
+		mutex_unlock(&chip->lock);
+		if (ret < 0)
+			return ret;
+		/* 1 + gain_val / 2^16 */
+		*val = 1;
+		*val2 = (15625 * ret) / 1024;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		mutex_lock(&chip->lock);
+		ret = i2c_smbus_read_word_swapped(chip->client,
+						  AD7746_REG_CAP_OFFH);
+		mutex_unlock(&chip->lock);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+	case IIO_CHAN_INFO_ZEROPOINT:
+		*val = FIELD_GET(AD7746_CAPDAC_DACP_MASK,
+				 chip->capdac[chan->channel][chan->differential]) * 338646;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			/* 8.192pf / 2^24 */
+			*val =  0;
+			*val2 = 488;
+			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_VOLTAGE:
+			/* 1170mV / 2^23 */
+			*val = 1170;
+			if (chan->channel == 1)
+				*val *= 6;
+			*val2 = 23;
+			return IIO_VAL_FRACTIONAL_LOG2;
+		case IIO_TEMP:
+			*val = 125;
+			*val2 = 8;
+			return IIO_VAL_FRACTIONAL_LOG2;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_CAPACITANCE:
+			idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config);
+			*val = ad7746_cap_filter_rate_table[idx][0];
+			return IIO_VAL_INT;
+		case IIO_VOLTAGE:
+			idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config);
+			*val = ad7746_vt_filter_rate_table[idx][0];
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ad7746_info = {
+	.attrs = &ad7746_attribute_group,
+	.read_raw = ad7746_read_raw,
+	.read_avail = ad7746_read_avail,
+	.write_raw = ad7746_write_raw,
+};
+
+static int ad7746_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ad7746_chip_info *chip;
+	struct iio_dev *indio_dev;
+	unsigned char regval = 0;
+	unsigned int vdd_permille;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	mutex_init(&chip->lock);
+
+	chip->client = client;
+	chip->capdac_set = -1;
+
+	indio_dev->name = id->name;
+	indio_dev->info = &ad7746_info;
+	indio_dev->channels = ad7746_channels;
+	if (id->driver_data == 7746)
+		indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
+	else
+		indio_dev->num_channels =  ARRAY_SIZE(ad7746_channels) - 2;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (device_property_read_bool(dev, "adi,exca-output-en")) {
+		if (device_property_read_bool(dev, "adi,exca-output-invert"))
+			regval |= AD7746_EXCSETUP_NEXCA;
+		else
+			regval |= AD7746_EXCSETUP_EXCA;
+	}
+
+	if (device_property_read_bool(dev, "adi,excb-output-en")) {
+		if (device_property_read_bool(dev, "adi,excb-output-invert"))
+			regval |= AD7746_EXCSETUP_NEXCB;
+		else
+			regval |= AD7746_EXCSETUP_EXCB;
+	}
+
+	ret = device_property_read_u32(dev, "adi,excitation-vdd-permille",
+				       &vdd_permille);
+	if (!ret) {
+		switch (vdd_permille) {
+		case 125:
+			regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 0);
+			break;
+		case 250:
+			regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 1);
+			break;
+		case 375:
+			regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 2);
+			break;
+		case 500:
+			regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 3);
+			break;
+		default:
+			break;
+		}
+	}
+
+	ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_EXC_SETUP,
+					regval);
+	if (ret < 0)
+		return ret;
+
+	return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+}
+
+static const struct i2c_device_id ad7746_id[] = {
+	{ "ad7745", 7745 },
+	{ "ad7746", 7746 },
+	{ "ad7747", 7747 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad7746_id);
+
+static const struct of_device_id ad7746_of_match[] = {
+	{ .compatible = "adi,ad7745" },
+	{ .compatible = "adi,ad7746" },
+	{ .compatible = "adi,ad7747" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7746_of_match);
+
+static struct i2c_driver ad7746_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = ad7746_of_match,
+	},
+	.probe = ad7746_probe,
+	.id_table = ad7746_id,
+};
+module_i2c_driver(ad7746_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7746/5/7 capacitive sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c
index 793d628db55f..54ccf19ab2bb 100644
--- a/drivers/iio/common/scmi_sensors/scmi_iio.c
+++ b/drivers/iio/common/scmi_sensors/scmi_iio.c
@@ -18,6 +18,7 @@
 #include <linux/scmi_protocol.h>
 #include <linux/time.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 #define SCMI_IIO_NUM_OF_AXIS 3
 
@@ -130,7 +131,6 @@ static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = {
 static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2)
 {
 	struct scmi_iio_priv *sensor = iio_priv(iio_dev);
-	const unsigned long UHZ_PER_HZ = 1000000UL;
 	u64 sec, mult, uHz, sf;
 	u32 sensor_config;
 	char buf[32];
@@ -145,7 +145,7 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2)
 		return err;
 	}
 
-	uHz = val * UHZ_PER_HZ + val2;
+	uHz = val * MICROHZ_PER_HZ + val2;
 
 	/*
 	 * The seconds field in the sensor interval in SCMI is 16 bits long
@@ -156,10 +156,10 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2)
 	 * count the number of characters
 	 */
 	sf = (u64)uHz * 0xFFFF;
-	do_div(sf,  UHZ_PER_HZ);
+	do_div(sf,  MICROHZ_PER_HZ);
 	mult = scnprintf(buf, sizeof(buf), "%llu", sf) - 1;
 
-	sec = int_pow(10, mult) * UHZ_PER_HZ;
+	sec = int_pow(10, mult) * MICROHZ_PER_HZ;
 	do_div(sec, uHz);
 	if (sec == 0) {
 		dev_err(&iio_dev->dev,
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 9910ba1da085..35720c64fea8 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -354,7 +354,7 @@ void st_sensors_dev_name_probe(struct device *dev, char *name, int len)
 		return;
 
 	/* The name from the match takes precedence if present */
-	strlcpy(name, match, len);
+	strscpy(name, match, len);
 }
 EXPORT_SYMBOL_NS(st_sensors_dev_name_probe, IIO_ST_SENSORS);
 
diff --git a/drivers/iio/dac/ad5593r.c b/drivers/iio/dac/ad5593r.c
index 92be661034a6..8e5e014e0c28 100644
--- a/drivers/iio/dac/ad5593r.c
+++ b/drivers/iio/dac/ad5593r.c
@@ -13,6 +13,8 @@
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 
+#include <asm/unaligned.h>
+
 #define AD5593R_MODE_CONF		(0 << 4)
 #define AD5593R_MODE_DAC_WRITE		(1 << 4)
 #define AD5593R_MODE_ADC_READBACK	(4 << 4)
@@ -20,6 +22,24 @@
 #define AD5593R_MODE_GPIO_READBACK	(6 << 4)
 #define AD5593R_MODE_REG_READBACK	(7 << 4)
 
+static int ad5593r_read_word(struct i2c_client *i2c, u8 reg, u16 *value)
+{
+	int ret;
+	u8 buf[2];
+
+	ret = i2c_smbus_write_byte(i2c, reg);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(i2c, buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+
+	*value = get_unaligned_be16(buf);
+
+	return 0;
+}
+
 static int ad5593r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value)
 {
 	struct i2c_client *i2c = to_i2c_client(st->dev);
@@ -38,13 +58,7 @@ static int ad5593r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value)
 	if (val < 0)
 		return (int) val;
 
-	val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_ADC_READBACK);
-	if (val < 0)
-		return (int) val;
-
-	*value = (u16) val;
-
-	return 0;
+	return ad5593r_read_word(i2c, AD5593R_MODE_ADC_READBACK, value);
 }
 
 static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value)
@@ -58,25 +72,19 @@ static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value)
 static int ad5593r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value)
 {
 	struct i2c_client *i2c = to_i2c_client(st->dev);
-	s32 val;
-
-	val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_REG_READBACK | reg);
-	if (val < 0)
-		return (int) val;
 
-	*value = (u16) val;
-
-	return 0;
+	return ad5593r_read_word(i2c, AD5593R_MODE_REG_READBACK | reg, value);
 }
 
 static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value)
 {
 	struct i2c_client *i2c = to_i2c_client(st->dev);
-	s32 val;
+	u16 val;
+	int ret;
 
-	val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_GPIO_READBACK);
-	if (val < 0)
-		return (int) val;
+	ret = ad5593r_read_word(i2c, AD5593R_MODE_GPIO_READBACK, &val);
+	if (ret)
+		return ret;
 
 	*value = (u8) val;
 
@@ -94,6 +102,10 @@ static const struct ad5592r_rw_ops ad5593r_rw_ops = {
 static int ad5593r_i2c_probe(struct i2c_client *i2c,
 		const struct i2c_device_id *id)
 {
+	if (!i2c_check_functionality(i2c->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
 	return ad5592r_probe(&i2c->dev, id->name, &ad5593r_rw_ops);
 }
 
diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c
index 135c8cedc33d..b27088464826 100644
--- a/drivers/iio/frequency/adf4371.c
+++ b/drivers/iio/frequency/adf4371.c
@@ -540,13 +540,6 @@ static int adf4371_setup(struct adf4371_state *st)
 	return regmap_bulk_write(st->regmap, ADF4371_REG(0x30), st->buf, 5);
 }
 
-static void adf4371_clk_disable(void *data)
-{
-	struct adf4371_state *st = data;
-
-	clk_disable_unprepare(st->clkin);
-}
-
 static int adf4371_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
@@ -579,18 +572,10 @@ static int adf4371_probe(struct spi_device *spi)
 	indio_dev->channels = st->chip_info->channels;
 	indio_dev->num_channels = st->chip_info->num_channels;
 
-	st->clkin = devm_clk_get(&spi->dev, "clkin");
+	st->clkin = devm_clk_get_enabled(&spi->dev, "clkin");
 	if (IS_ERR(st->clkin))
 		return PTR_ERR(st->clkin);
 
-	ret = clk_prepare_enable(st->clkin);
-	if (ret < 0)
-		return ret;
-
-	ret = devm_add_action_or_reset(&spi->dev, adf4371_clk_disable, st);
-	if (ret)
-		return ret;
-
 	st->clkin_freq = clk_get_rate(st->clkin);
 
 	ret = adf4371_setup(st);
diff --git a/drivers/iio/frequency/admv1014.c b/drivers/iio/frequency/admv1014.c
index 865addd10db4..bb5e1feef42b 100644
--- a/drivers/iio/frequency/admv1014.c
+++ b/drivers/iio/frequency/admv1014.c
@@ -669,8 +669,7 @@ static int admv1014_init(struct admv1014_state *st)
 	chip_id = FIELD_GET(ADMV1014_CHIP_ID_MSK, chip_id);
 	if (chip_id != ADMV1014_CHIP_ID) {
 		dev_err(&spi->dev, "Invalid Chip ID.\n");
-		ret = -EINVAL;
-		return ret;
+		return -EINVAL;
 	}
 
 	ret = __admv1014_spi_update_bits(st, ADMV1014_REG_QUAD,
diff --git a/drivers/iio/frequency/adrf6780.c b/drivers/iio/frequency/adrf6780.c
index 21878bad0909..b4defb82f37e 100644
--- a/drivers/iio/frequency/adrf6780.c
+++ b/drivers/iio/frequency/adrf6780.c
@@ -441,11 +441,6 @@ static void adrf6780_properties_parse(struct adrf6780_state *st)
 	st->vdet_out_en = device_property_read_bool(&spi->dev, "adi,vdet-out-en");
 }
 
-static void adrf6780_clk_disable(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static void adrf6780_powerdown(void *data)
 {
 	/* Disable all components in the Enable Register */
@@ -473,20 +468,11 @@ static int adrf6780_probe(struct spi_device *spi)
 
 	adrf6780_properties_parse(st);
 
-	st->clkin = devm_clk_get(&spi->dev, "lo_in");
+	st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in");
 	if (IS_ERR(st->clkin))
 		return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
 				     "failed to get the LO input clock\n");
 
-	ret = clk_prepare_enable(st->clkin);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(&spi->dev, adrf6780_clk_disable,
-				       st->clkin);
-	if (ret)
-		return ret;
-
 	mutex_init(&st->lock);
 
 	ret = adrf6780_init(st);
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 001ca2c3ff95..f1d7d4b5e222 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -52,6 +52,7 @@ config ADIS16480
 	  ADIS16485, ADIS16488 inertial sensors.
 
 source "drivers/iio/imu/bmi160/Kconfig"
+source "drivers/iio/imu/bno055/Kconfig"
 
 config FXOS8700
 	tristate
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index c82748096c77..6eb612034722 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -15,6 +15,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
 obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
 
 obj-y += bmi160/
+obj-y += bno055/
 
 obj-$(CONFIG_FXOS8700) += fxos8700_core.o
 obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c
index ff2b0fab840a..aec55f7e1f26 100644
--- a/drivers/iio/imu/adis16475.c
+++ b/drivers/iio/imu/adis16475.c
@@ -1120,11 +1120,6 @@ check_burst32:
 	return IRQ_HANDLED;
 }
 
-static void adis16475_disable_clk(void *data)
-{
-	clk_disable_unprepare((struct clk *)data);
-}
-
 static int adis16475_config_sync_mode(struct adis16475 *st)
 {
 	int ret;
@@ -1150,19 +1145,11 @@ static int adis16475_config_sync_mode(struct adis16475 *st)
 
 	/* All the other modes require external input signal */
 	if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) {
-		struct clk *clk = devm_clk_get(dev, NULL);
+		struct clk *clk = devm_clk_get_enabled(dev, NULL);
 
 		if (IS_ERR(clk))
 			return PTR_ERR(clk);
 
-		ret = clk_prepare_enable(clk);
-		if (ret)
-			return ret;
-
-		ret = devm_add_action_or_reset(dev, adis16475_disable_clk, clk);
-		if (ret)
-			return ret;
-
 		st->clk_freq = clk_get_rate(clk);
 		if (st->clk_freq < sync->min_rate ||
 		    st->clk_freq > sync->max_rate) {
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
new file mode 100644
index 000000000000..fa79b1ac4f85
--- /dev/null
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config BOSCH_BNO055
+	tristate
+
+config BOSCH_BNO055_SERIAL
+	tristate "Bosch BNO055 attached via UART"
+	depends on SERIAL_DEV_BUS
+	select BOSCH_BNO055
+	help
+	  Enable this to support Bosch BNO055 IMUs attached via UART.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bno055_sl.
+
+config BOSCH_BNO055_I2C
+	tristate "Bosch BNO055 attached via I2C bus"
+	depends on I2C
+	select REGMAP_I2C
+	select BOSCH_BNO055
+	help
+	  Enable this to support Bosch BNO055 IMUs attached via I2C bus.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called bno055_i2c.
diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
new file mode 100644
index 000000000000..98c624730dae
--- /dev/null
+++ b/drivers/iio/imu/bno055/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_BOSCH_BNO055) += bno055.o
+obj-$(CONFIG_BOSCH_BNO055_SERIAL) += bno055_ser.o
+bno055_ser-y := bno055_ser_core.o
+# define_trace.h needs to know how to find our header
+CFLAGS_bno055_ser_trace.o := -I$(src)
+bno055_ser-$(CONFIG_TRACING) += bno055_ser_trace.o
+
+obj-$(CONFIG_BOSCH_BNO055_I2C) += bno055_i2c.o
diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c
new file mode 100644
index 000000000000..307557a609e3
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.c
@@ -0,0 +1,1685 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IIO driver for Bosch BNO055 IMU
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ *
+ * Portions of this driver are taken from the BNO055 driver patch
+ * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation.
+ *
+ * This driver is also based on BMI160 driver, which is:
+ *	Copyright (c) 2016, Intel Corporation.
+ *	Copyright (c) 2019, Martin Kelly.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "bno055.h"
+
+#define BNO055_FW_UID_FMT "bno055-caldata-%*phN.dat"
+#define BNO055_FW_GENERIC_NAME "bno055-caldata.dat"
+
+/* common registers */
+#define BNO055_PAGESEL_REG		0x7
+
+/* page 0 registers */
+#define BNO055_CHIP_ID_REG		0x0
+#define BNO055_CHIP_ID_MAGIC 0xA0
+#define BNO055_SW_REV_LSB_REG		0x4
+#define BNO055_SW_REV_MSB_REG		0x5
+#define BNO055_ACC_DATA_X_LSB_REG	0x8
+#define BNO055_ACC_DATA_Y_LSB_REG	0xA
+#define BNO055_ACC_DATA_Z_LSB_REG	0xC
+#define BNO055_MAG_DATA_X_LSB_REG	0xE
+#define BNO055_MAG_DATA_Y_LSB_REG	0x10
+#define BNO055_MAG_DATA_Z_LSB_REG	0x12
+#define BNO055_GYR_DATA_X_LSB_REG	0x14
+#define BNO055_GYR_DATA_Y_LSB_REG	0x16
+#define BNO055_GYR_DATA_Z_LSB_REG	0x18
+#define BNO055_EUL_DATA_X_LSB_REG	0x1A
+#define BNO055_EUL_DATA_Y_LSB_REG	0x1C
+#define BNO055_EUL_DATA_Z_LSB_REG	0x1E
+#define BNO055_QUAT_DATA_W_LSB_REG	0x20
+#define BNO055_LIA_DATA_X_LSB_REG	0x28
+#define BNO055_LIA_DATA_Y_LSB_REG	0x2A
+#define BNO055_LIA_DATA_Z_LSB_REG	0x2C
+#define BNO055_GRAVITY_DATA_X_LSB_REG	0x2E
+#define BNO055_GRAVITY_DATA_Y_LSB_REG	0x30
+#define BNO055_GRAVITY_DATA_Z_LSB_REG	0x32
+#define BNO055_SCAN_CH_COUNT ((BNO055_GRAVITY_DATA_Z_LSB_REG - BNO055_ACC_DATA_X_LSB_REG) / 2)
+#define BNO055_TEMP_REG			0x34
+#define BNO055_CALIB_STAT_REG		0x35
+#define BNO055_CALIB_STAT_MAGN_SHIFT 0
+#define BNO055_CALIB_STAT_ACCEL_SHIFT 2
+#define BNO055_CALIB_STAT_GYRO_SHIFT 4
+#define BNO055_CALIB_STAT_SYS_SHIFT 6
+#define BNO055_SYS_ERR_REG		0x3A
+#define BNO055_POWER_MODE_REG		0x3E
+#define BNO055_POWER_MODE_NORMAL 0
+#define BNO055_SYS_TRIGGER_REG		0x3F
+#define BNO055_SYS_TRIGGER_RST_SYS BIT(5)
+#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7)
+#define BNO055_OPR_MODE_REG		0x3D
+#define BNO055_OPR_MODE_CONFIG 0x0
+#define BNO055_OPR_MODE_AMG 0x7
+#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB
+#define BNO055_OPR_MODE_FUSION 0xC
+#define BNO055_UNIT_SEL_REG		0x3B
+/* Android orientation mode means: pitch value decreases turning clockwise */
+#define BNO055_UNIT_SEL_ANDROID BIT(7)
+#define BNO055_UNIT_SEL_GYR_RPS BIT(1)
+#define BNO055_CALDATA_START		0x55
+#define BNO055_CALDATA_END		0x6A
+#define BNO055_CALDATA_LEN 22
+
+/*
+ * The difference in address between the register that contains the
+ * value and the register that contains the offset.  This applies for
+ * accel, gyro and magn channels.
+ */
+#define BNO055_REG_OFFSET_ADDR		0x4D
+
+/* page 1 registers */
+#define BNO055_PG1(x) ((x) | 0x80)
+#define BNO055_ACC_CONFIG_REG		BNO055_PG1(0x8)
+#define BNO055_ACC_CONFIG_LPF_MASK GENMASK(4, 2)
+#define BNO055_ACC_CONFIG_RANGE_MASK GENMASK(1, 0)
+#define BNO055_MAG_CONFIG_REG		BNO055_PG1(0x9)
+#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18
+#define BNO055_MAG_CONFIG_ODR_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_REG		BNO055_PG1(0xA)
+#define BNO055_GYR_CONFIG_RANGE_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_LPF_MASK GENMASK(5, 3)
+#define BNO055_GYR_AM_SET_REG		BNO055_PG1(0x1F)
+#define BNO055_UID_LOWER_REG		BNO055_PG1(0x50)
+#define BNO055_UID_HIGHER_REG		BNO055_PG1(0x5F)
+#define BNO055_UID_LEN 16
+
+struct bno055_sysfs_attr {
+	int *vals;
+	int len;
+	int *fusion_vals;
+	int *hw_xlate;
+	int type;
+};
+
+static int bno055_acc_lpf_vals[] = {
+	7, 810000, 15, 630000, 31, 250000, 62, 500000,
+	125, 0, 250, 0, 500, 0, 1000, 0,
+};
+
+static struct bno055_sysfs_attr bno055_acc_lpf = {
+	.vals = bno055_acc_lpf_vals,
+	.len = ARRAY_SIZE(bno055_acc_lpf_vals),
+	.fusion_vals = (int[]){62, 500000},
+	.type = IIO_VAL_INT_PLUS_MICRO,
+};
+
+static int bno055_acc_range_vals[] = {
+  /* G:    2,    4,    8,    16 */
+	1962, 3924, 7848, 15696
+};
+
+static struct bno055_sysfs_attr bno055_acc_range = {
+	.vals = bno055_acc_range_vals,
+	.len = ARRAY_SIZE(bno055_acc_range_vals),
+	.fusion_vals = (int[]){3924}, /* 4G */
+	.type = IIO_VAL_INT,
+};
+
+/*
+ * Theoretically the IMU should return data in a given (i.e. fixed) unit
+ * regardless of the range setting. This happens for the accelerometer, but not
+ * for the gyroscope; the gyroscope range setting affects the scale.
+ * This is probably due to this[0] bug.
+ * For this reason we map the internal range setting onto the standard IIO scale
+ * attribute for gyro.
+ * Since the bug[0] may be fixed in future, we check for the IMU FW version and
+ * eventually warn the user.
+ * Currently we just don't care about "range" attributes for gyro.
+ *
+ * [0]  https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BNO055-Wrong-sensitivity-resolution-in-datasheet/td-p/10266
+ */
+
+/*
+ * dps = hwval * (dps_range/2^15)
+ * rps = hwval * (rps_range/2^15)
+ *     = hwval * (dps_range/(2^15 * k))
+ * where k is rad-to-deg factor
+ */
+static int bno055_gyr_scale_vals[] = {
+	125, 1877467, 250, 1877467, 500, 1877467,
+	1000, 1877467, 2000, 1877467,
+};
+
+static struct bno055_sysfs_attr bno055_gyr_scale = {
+	.vals = bno055_gyr_scale_vals,
+	.len = ARRAY_SIZE(bno055_gyr_scale_vals),
+	.fusion_vals = (int[]){1, 900},
+	.hw_xlate = (int[]){4, 3, 2, 1, 0},
+	.type = IIO_VAL_FRACTIONAL,
+};
+
+static int bno055_gyr_lpf_vals[] = {12, 23, 32, 47, 64, 116, 230, 523};
+static struct bno055_sysfs_attr bno055_gyr_lpf = {
+	.vals = bno055_gyr_lpf_vals,
+	.len = ARRAY_SIZE(bno055_gyr_lpf_vals),
+	.fusion_vals = (int[]){32},
+	.hw_xlate = (int[]){5, 4, 7, 3, 6, 2, 1, 0},
+	.type = IIO_VAL_INT,
+};
+
+static int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30};
+static struct bno055_sysfs_attr bno055_mag_odr = {
+	.vals = bno055_mag_odr_vals,
+	.len =  ARRAY_SIZE(bno055_mag_odr_vals),
+	.fusion_vals = (int[]){20},
+	.type = IIO_VAL_INT,
+};
+
+struct bno055_priv {
+	struct regmap *regmap;
+	struct device *dev;
+	struct clk *clk;
+	int operation_mode;
+	int xfer_burst_break_thr;
+	struct mutex lock;
+	u8 uid[BNO055_UID_LEN];
+	struct gpio_desc *reset_gpio;
+	bool sw_reset;
+	struct {
+		__le16 chans[BNO055_SCAN_CH_COUNT];
+		s64 timestamp __aligned(8);
+	} buf;
+	struct dentry *debugfs;
+};
+
+static bool bno055_regmap_volatile(struct device *dev, unsigned int reg)
+{
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return true;
+
+	/* when in fusion mode, config is updated by chip */
+	if (reg == BNO055_MAG_CONFIG_REG ||
+	    reg == BNO055_ACC_CONFIG_REG ||
+	    reg == BNO055_GYR_CONFIG_REG)
+		return true;
+
+	/* calibration data may be updated by the IMU */
+	if (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END)
+		return true;
+
+	return false;
+}
+
+static bool bno055_regmap_readable(struct device *dev, unsigned int reg)
+{
+	/* unnamed PG0 reserved areas */
+	if ((reg < BNO055_PG1(0) && reg > BNO055_CALDATA_END) ||
+	    reg == 0x3C)
+		return false;
+
+	/* unnamed PG1 reserved areas */
+	if (reg > BNO055_PG1(BNO055_UID_HIGHER_REG) ||
+	    (reg < BNO055_PG1(BNO055_UID_LOWER_REG) && reg > BNO055_PG1(BNO055_GYR_AM_SET_REG)) ||
+	    reg == BNO055_PG1(0xE) ||
+	    (reg < BNO055_PG1(BNO055_PAGESEL_REG) && reg >= BNO055_PG1(0x0)))
+		return false;
+	return true;
+}
+
+static bool bno055_regmap_writeable(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Unreadable registers are indeed reserved; there are no WO regs
+	 * (except for a single bit in SYS_TRIGGER register)
+	 */
+	if (!bno055_regmap_readable(dev, reg))
+		return false;
+
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return false;
+
+	/* ID areas */
+	if (reg < BNO055_PAGESEL_REG ||
+	    (reg <= BNO055_UID_HIGHER_REG && reg >= BNO055_UID_LOWER_REG))
+		return false;
+
+	return true;
+}
+
+static const struct regmap_range_cfg bno055_regmap_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 0x7f * 2,
+		.selector_reg = BNO055_PAGESEL_REG,
+		.selector_mask = GENMASK(7, 0),
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 0x80,
+	},
+};
+
+const struct regmap_config bno055_regmap_config = {
+	.name = "bno055",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.ranges = bno055_regmap_ranges,
+	.num_ranges = 1,
+	.volatile_reg = bno055_regmap_volatile,
+	.max_register = 0x80 * 2,
+	.writeable_reg = bno055_regmap_writeable,
+	.readable_reg = bno055_regmap_readable,
+	.cache_type = REGCACHE_RBTREE,
+};
+EXPORT_SYMBOL_NS_GPL(bno055_regmap_config, IIO_BNO055);
+
+/* must be called in configuration mode */
+static int bno055_calibration_load(struct bno055_priv *priv, const u8 *data, int len)
+{
+	if (len != BNO055_CALDATA_LEN) {
+		dev_dbg(priv->dev, "Invalid calibration file size %d (expected %d)",
+			len, BNO055_CALDATA_LEN);
+		return -EINVAL;
+	}
+
+	dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, data);
+	return regmap_bulk_write(priv->regmap, BNO055_CALDATA_START,
+				 data, BNO055_CALDATA_LEN);
+}
+
+static int bno055_operation_mode_do_set(struct bno055_priv *priv,
+					int operation_mode)
+{
+	int ret;
+
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   operation_mode);
+	if (ret)
+		return ret;
+
+	/* Following datasheet specifications: sensor takes 7mS up to 19 mS to switch mode */
+	msleep(20);
+
+	return 0;
+}
+
+static int bno055_system_reset(struct bno055_priv *priv)
+{
+	int ret;
+
+	if (priv->reset_gpio) {
+		gpiod_set_value_cansleep(priv->reset_gpio, 0);
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(priv->reset_gpio, 1);
+	} else if (priv->sw_reset) {
+		ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+				   BNO055_SYS_TRIGGER_RST_SYS);
+		if (ret)
+			return ret;
+	} else {
+		return 0;
+	}
+
+	regcache_drop_region(priv->regmap, 0x0, 0xff);
+	usleep_range(650000, 700000);
+
+	return 0;
+}
+
+static int bno055_init(struct bno055_priv *priv, const u8 *caldata, int len)
+{
+	int ret;
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(priv->regmap, BNO055_POWER_MODE_REG,
+			   BNO055_POWER_MODE_NORMAL);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+			   priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0);
+	if (ret)
+		return ret;
+
+	/* use standard SI units */
+	ret = regmap_write(priv->regmap, BNO055_UNIT_SEL_REG,
+			   BNO055_UNIT_SEL_ANDROID | BNO055_UNIT_SEL_GYR_RPS);
+	if (ret)
+		return ret;
+
+	if (caldata) {
+		ret = bno055_calibration_load(priv, caldata, len);
+		if (ret)
+			dev_warn(priv->dev, "failed to load calibration data with error %d\n",
+				 ret);
+	}
+
+	return 0;
+}
+
+static ssize_t bno055_operation_mode_set(struct bno055_priv *priv,
+					 int operation_mode)
+{
+	u8 caldata[BNO055_CALDATA_LEN];
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		goto exit_unlock;
+
+	if (operation_mode == BNO055_OPR_MODE_FUSION ||
+	    operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF) {
+		/* for entering fusion mode, reset the chip to clear the algo state */
+		ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, caldata,
+				       BNO055_CALDATA_LEN);
+		if (ret)
+			goto exit_unlock;
+
+		ret = bno055_system_reset(priv);
+		if (ret)
+			goto exit_unlock;
+
+		ret = bno055_init(priv, caldata, BNO055_CALDATA_LEN);
+		if (ret)
+			goto exit_unlock;
+	}
+
+	ret = bno055_operation_mode_do_set(priv, operation_mode);
+	if (ret)
+		goto exit_unlock;
+
+	priv->operation_mode = operation_mode;
+
+exit_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static void bno055_uninit(void *arg)
+{
+	struct bno055_priv *priv = arg;
+
+	/* stop the IMU */
+	bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+}
+
+#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh, _avail) {	\
+	.address = _address,							\
+	.type = _type,								\
+	.modified = 1,								\
+	.channel2 = IIO_MOD_##_axis,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh),		\
+	.info_mask_shared_by_type_available = _avail,				\
+	.scan_index = _index,							\
+	.scan_type = {								\
+		.sign = 's',							\
+		.realbits = 16,							\
+		.storagebits = 16,						\
+		.endianness = IIO_LE,						\
+		.repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0,        \
+	},									\
+}
+
+/* scan indexes follow DATA register order */
+enum bno055_scan_axis {
+	BNO055_SCAN_ACCEL_X,
+	BNO055_SCAN_ACCEL_Y,
+	BNO055_SCAN_ACCEL_Z,
+	BNO055_SCAN_MAGN_X,
+	BNO055_SCAN_MAGN_Y,
+	BNO055_SCAN_MAGN_Z,
+	BNO055_SCAN_GYRO_X,
+	BNO055_SCAN_GYRO_Y,
+	BNO055_SCAN_GYRO_Z,
+	BNO055_SCAN_YAW,
+	BNO055_SCAN_ROLL,
+	BNO055_SCAN_PITCH,
+	BNO055_SCAN_QUATERNION,
+	BNO055_SCAN_LIA_X,
+	BNO055_SCAN_LIA_Y,
+	BNO055_SCAN_LIA_Z,
+	BNO055_SCAN_GRAVITY_X,
+	BNO055_SCAN_GRAVITY_Y,
+	BNO055_SCAN_GRAVITY_Z,
+	BNO055_SCAN_TIMESTAMP,
+	_BNO055_SCAN_MAX
+};
+
+static const struct iio_chan_spec bno055_channels[] = {
+	/* accelerometer */
+	BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X,
+		       BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y,
+		       BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z,
+		       BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	/* gyroscope */
+	BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X,
+		       BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y,
+		       BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z,
+		       BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	/* magnetometer */
+	BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X,
+		       BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y,
+		       BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z,
+		       BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	/* euler angle */
+	BNO055_CHANNEL(IIO_ROT, YAW, BNO055_SCAN_YAW,
+		       BNO055_EUL_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, ROLL, BNO055_SCAN_ROLL,
+		       BNO055_EUL_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, PITCH, BNO055_SCAN_PITCH,
+		       BNO055_EUL_DATA_Z_LSB_REG, 0, 0, 0),
+	/* quaternion */
+	BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION,
+		       BNO055_QUAT_DATA_W_LSB_REG, 0, 0, 0),
+
+	/* linear acceleration */
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_X, BNO055_SCAN_LIA_X,
+		       BNO055_LIA_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_Y, BNO055_SCAN_LIA_Y,
+		       BNO055_LIA_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_Z, BNO055_SCAN_LIA_Z,
+		       BNO055_LIA_DATA_Z_LSB_REG, 0, 0, 0),
+
+	/* gravity vector */
+	BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X,
+		       BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y,
+		       BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z,
+		       BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0, 0),
+
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = -1,
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP),
+};
+
+static int bno055_get_regmask(struct bno055_priv *priv, int *val, int *val2,
+			      int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+	const int shift = __ffs(mask);
+	int hwval, idx;
+	int ret;
+	int i;
+
+	ret = regmap_read(priv->regmap, reg, &hwval);
+	if (ret)
+		return ret;
+
+	idx = (hwval & mask) >> shift;
+	if (attr->hw_xlate)
+		for (i = 0; i < attr->len; i++)
+			if (attr->hw_xlate[i] == idx) {
+				idx = i;
+				break;
+			}
+	if (attr->type == IIO_VAL_INT) {
+		*val = attr->vals[idx];
+	} else { /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL */
+		*val = attr->vals[idx * 2];
+		*val2 = attr->vals[idx * 2 + 1];
+	}
+
+	return attr->type;
+}
+
+static int bno055_set_regmask(struct bno055_priv *priv, int val, int val2,
+			      int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+	const int shift = __ffs(mask);
+	int best_delta;
+	int req_val;
+	int tbl_val;
+	bool first;
+	int delta;
+	int hwval;
+	int ret;
+	int len;
+	int i;
+
+	/*
+	 * The closest value the HW supports is only one in fusion mode,
+	 * and it is autoselected, so don't do anything, just return OK,
+	 * as the closest possible value has been (virtually) selected
+	 */
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return 0;
+
+	len = attr->len;
+
+	/*
+	 * We always get a request in INT_PLUS_MICRO, but we
+	 * take care of the micro part only when we really have
+	 * non-integer tables. This prevents 32-bit overflow with
+	 * larger integers contained in integer tables.
+	 */
+	req_val = val;
+	if (attr->type != IIO_VAL_INT) {
+		len /= 2;
+		req_val = min(val, 2147) * 1000000 + val2;
+	}
+
+	first = true;
+	for (i = 0; i < len; i++) {
+		switch (attr->type) {
+		case IIO_VAL_INT:
+			tbl_val = attr->vals[i];
+			break;
+		case IIO_VAL_INT_PLUS_MICRO:
+			WARN_ON(attr->vals[i * 2] > 2147);
+			tbl_val = attr->vals[i * 2] * 1000000 +
+				attr->vals[i * 2 + 1];
+			break;
+		case IIO_VAL_FRACTIONAL:
+			WARN_ON(attr->vals[i * 2] > 4294);
+			tbl_val = attr->vals[i * 2] * 1000000 /
+				attr->vals[i * 2 + 1];
+			break;
+		default:
+			return -EINVAL;
+		}
+		delta = abs(tbl_val - req_val);
+		if (delta < best_delta || first) {
+			best_delta = delta;
+			hwval = i;
+			first = false;
+		}
+	}
+
+	if (attr->hw_xlate)
+		hwval = attr->hw_xlate[hwval];
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap, reg, mask, hwval << shift);
+	if (ret)
+		return ret;
+
+	return bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_AMG);
+}
+
+static int bno055_read_simple_chan(struct iio_dev *indio_dev,
+				   struct iio_chan_spec const *chan,
+				   int *val, int *val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_val;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_bulk_read(priv->regmap, chan->address,
+				       &raw_val, sizeof(raw_val));
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(le16_to_cpu(raw_val), 15);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+		if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+			*val = 0;
+		} else {
+			ret = regmap_bulk_read(priv->regmap,
+					       chan->address +
+					       BNO055_REG_OFFSET_ADDR,
+					       &raw_val, sizeof(raw_val));
+			if (ret < 0)
+				return ret;
+			/*
+			 * IMU reports sensor offsets; IIO wants correction
+			 * offsets, thus we need the 'minus' here.
+			 */
+			*val = -sign_extend32(le16_to_cpu(raw_val), 15);
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1;
+		switch (chan->type) {
+		case IIO_GRAVITY:
+			/* Table 3-35: 1 m/s^2 = 100 LSB */
+		case IIO_ACCEL:
+			/* Table 3-17: 1 m/s^2 = 100 LSB */
+			*val2 = 100;
+			break;
+		case IIO_MAGN:
+			/*
+			 * Table 3-19: 1 uT = 16 LSB.  But we need
+			 * Gauss: 1G = 0.1 uT.
+			 */
+			*val2 = 160;
+			break;
+		case IIO_ANGL_VEL:
+			/*
+			 * Table 3-22: 1 Rps = 900 LSB
+			 * .. but this is not exactly true. See comment at the
+			 * beginning of this file.
+			 */
+			if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+				*val = bno055_gyr_scale.fusion_vals[0];
+				*val2 = bno055_gyr_scale.fusion_vals[1];
+				return IIO_VAL_FRACTIONAL;
+			}
+
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_RANGE_MASK,
+						  &bno055_gyr_scale);
+			break;
+		case IIO_ROT:
+			/* Table 3-28: 1 degree = 16 LSB */
+			*val2 = 16;
+			break;
+		default:
+			return -EINVAL;
+		}
+		return IIO_VAL_FRACTIONAL;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_MAGN)
+			return -EINVAL;
+
+		return bno055_get_regmask(priv, val, val2,
+					  BNO055_MAG_CONFIG_REG,
+					  BNO055_MAG_CONFIG_ODR_MASK,
+					  &bno055_mag_odr);
+
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_LPF_MASK,
+						  &bno055_gyr_lpf);
+		case IIO_ACCEL:
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_ACC_CONFIG_REG,
+						  BNO055_ACC_CONFIG_LPF_MASK,
+						  &bno055_acc_lpf);
+		default:
+			return -EINVAL;
+		}
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_sysfs_attr_avail(struct bno055_priv *priv, struct bno055_sysfs_attr *attr,
+				   const int **vals, int *length)
+{
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+		/* locked when fusion enabled */
+		*vals = attr->fusion_vals;
+		if (attr->type == IIO_VAL_INT)
+			*length = 1;
+		else
+			*length = 2; /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL*/
+	} else {
+		*vals = attr->vals;
+		*length = attr->len;
+	}
+
+	return attr->type;
+}
+
+static int bno055_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_gyr_scale,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_gyr_lpf,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		case IIO_ACCEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_acc_lpf,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_MAGN:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_mag_odr,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	unsigned int raw_val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C.
+	 * ABI wants milliC.
+	 */
+	*val = raw_val * 1000;
+
+	return IIO_VAL_INT;
+}
+
+static int bno055_read_quaternion(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_vals[4];
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (size < 4)
+			return -EINVAL;
+		ret = regmap_bulk_read(priv->regmap,
+				       BNO055_QUAT_DATA_W_LSB_REG,
+				       raw_vals, sizeof(raw_vals));
+		if (ret < 0)
+			return ret;
+		for (i = 0; i < 4; i++)
+			vals[i] = sign_extend32(le16_to_cpu(raw_vals[i]), 15);
+		*val_len = 4;
+		return IIO_VAL_INT_MULTIPLE;
+	case IIO_CHAN_INFO_SCALE:
+		/* Table 3-31: 1 quaternion = 2^14 LSB */
+		if (size < 2)
+			return -EINVAL;
+		vals[0] = 1;
+		vals[1] = 14;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static bool bno055_is_chan_readable(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return true;
+
+	switch (chan->type) {
+	case IIO_GRAVITY:
+	case IIO_ROT:
+		return false;
+	case IIO_ACCEL:
+		if (chan->channel2 == IIO_MOD_LINEAR_X ||
+		    chan->channel2 == IIO_MOD_LINEAR_Y ||
+		    chan->channel2 == IIO_MOD_LINEAR_Z)
+			return false;
+		return true;
+	default:
+		return true;
+	}
+}
+
+static int _bno055_read_raw_multi(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	if (!bno055_is_chan_readable(indio_dev, chan))
+		return -EBUSY;
+
+	switch (chan->type) {
+	case IIO_MAGN:
+	case IIO_ACCEL:
+	case IIO_ANGL_VEL:
+	case IIO_GRAVITY:
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	case IIO_TEMP:
+		*val_len = 1;
+		return bno055_read_temp_chan(indio_dev, &vals[0]);
+	case IIO_ROT:
+		/*
+		 * Rotation is exposed as either a quaternion or three
+		 * Euler angles.
+		 */
+		if (chan->channel2 == IIO_MOD_QUATERNION)
+			return bno055_read_quaternion(indio_dev, chan,
+						      size, vals,
+						      val_len, mask);
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_raw_multi(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int size, int *vals, int *val_len,
+				 long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_read_raw_multi(indio_dev, chan, size,
+				     vals, val_len, mask);
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int _bno055_write_raw(struct iio_dev *iio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	switch (chan->type) {
+	case IIO_MAGN:
+		switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_MAG_CONFIG_REG,
+						  BNO055_MAG_CONFIG_ODR_MASK,
+						  &bno055_mag_odr);
+		default:
+			return -EINVAL;
+		}
+	case IIO_ACCEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_ACC_CONFIG_REG,
+						  BNO055_ACC_CONFIG_LPF_MASK,
+						  &bno055_acc_lpf);
+
+		default:
+			return -EINVAL;
+		}
+	case IIO_ANGL_VEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_LPF_MASK,
+						  &bno055_gyr_lpf);
+		case IIO_CHAN_INFO_SCALE:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_RANGE_MASK,
+						  &bno055_gyr_scale);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_write_raw(struct iio_dev *iio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_write_raw(iio_dev, chan, val, val2, mask);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static ssize_t in_accel_range_raw_available_show(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int len = 0;
+	int i;
+
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return sysfs_emit(buf, "%d\n", bno055_acc_range.fusion_vals[0]);
+
+	for (i = 0; i < bno055_acc_range.len; i++)
+		len += sysfs_emit_at(buf, len, "%d ", bno055_acc_range.vals[i]);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t fusion_enable_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode != BNO055_OPR_MODE_AMG);
+}
+
+static ssize_t fusion_enable_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	bool en;
+	int ret;
+
+	if (indio_dev->active_scan_mask &&
+	    !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+		return -EBUSY;
+
+	ret = kstrtobool(buf, &en);
+	if (ret)
+		return -EINVAL;
+
+	if (!en)
+		return bno055_operation_mode_set(priv, BNO055_OPR_MODE_AMG) ?: len;
+
+	/*
+	 * Coming from AMG means the FMC was off, just switch to fusion but
+	 * don't change anything that doesn't belong to us (i.e let FMC stay off).
+	 * Coming from any other fusion mode means we don't need to do anything.
+	 */
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+		return  bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF) ?: len;
+
+	return len;
+}
+
+static ssize_t in_magn_calibration_fast_enable_show(struct device *dev,
+						    struct device_attribute *attr,
+						    char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode == BNO055_OPR_MODE_FUSION);
+}
+
+static ssize_t in_magn_calibration_fast_enable_store(struct device *dev,
+						     struct device_attribute *attr,
+						     const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	if (indio_dev->active_scan_mask &&
+	    !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+		return -EBUSY;
+
+	if (sysfs_streq(buf, "0")) {
+		if (priv->operation_mode == BNO055_OPR_MODE_FUSION) {
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF);
+			if (ret)
+				return ret;
+		}
+	} else {
+		if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+			return -EINVAL;
+
+		if (priv->operation_mode != BNO055_OPR_MODE_FUSION) {
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return len;
+}
+
+static ssize_t in_accel_range_raw_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int val;
+	int ret;
+
+	ret = bno055_get_regmask(priv, &val, NULL,
+				 BNO055_ACC_CONFIG_REG,
+				 BNO055_ACC_CONFIG_RANGE_MASK,
+				 &bno055_acc_range);
+	if (ret < 0)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t in_accel_range_raw_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_set_regmask(priv, val, 0,
+				 BNO055_ACC_CONFIG_REG,
+				 BNO055_ACC_CONFIG_RANGE_MASK,
+				 &bno055_acc_range);
+	mutex_unlock(&priv->lock);
+
+	return ret ?: len;
+}
+
+static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int calib;
+	int ret;
+	int val;
+
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG ||
+	    (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF &&
+	     which == BNO055_CALIB_STAT_MAGN_SHIFT)) {
+		calib = 0;
+	} else {
+		mutex_lock(&priv->lock);
+		ret = regmap_read(priv->regmap, BNO055_CALIB_STAT_REG, &val);
+		mutex_unlock(&priv->lock);
+
+		if (ret)
+			return -EIO;
+
+		calib = ((val >> which) & GENMASK(1, 0)) + 1;
+	}
+
+	return sysfs_emit(buf, "%d\n", calib);
+}
+
+static ssize_t serialnumber_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%*ph\n", BNO055_UID_LEN, priv->uid);
+}
+
+static ssize_t calibration_data_read(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr, char *buf,
+				     loff_t pos, size_t count)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(kobj_to_dev(kobj)));
+	u8 data[BNO055_CALDATA_LEN];
+	int ret;
+
+	/*
+	 * Calibration data is volatile; reading it in chunks will possibly
+	 * results in inconsistent data. We require the user to read the whole
+	 * blob in a single chunk
+	 */
+	if (count < BNO055_CALDATA_LEN || pos)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		goto exit_unlock;
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data,
+			       BNO055_CALDATA_LEN);
+	if (ret)
+		goto exit_unlock;
+
+	ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+	if (ret)
+		goto exit_unlock;
+
+	memcpy(buf, data, BNO055_CALDATA_LEN);
+
+	ret = BNO055_CALDATA_LEN;
+exit_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static ssize_t sys_calibration_auto_status_show(struct device *dev,
+						struct device_attribute *a,
+						char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT);
+}
+
+static ssize_t in_accel_calibration_auto_status_show(struct device *dev,
+						     struct device_attribute *a,
+						     char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT);
+}
+
+static ssize_t in_gyro_calibration_auto_status_show(struct device *dev,
+						    struct device_attribute *a,
+						    char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT);
+}
+
+static ssize_t in_magn_calibration_auto_status_show(struct device *dev,
+						    struct device_attribute *a,
+						    char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT);
+}
+
+static int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg,
+				     unsigned int writeval, unsigned int *readval)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	if (readval)
+		return regmap_read(priv->regmap, reg, readval);
+	else
+		return regmap_write(priv->regmap, reg, writeval);
+}
+
+static ssize_t bno055_show_fw_version(struct file *file, char __user *userbuf,
+				      size_t count, loff_t *ppos)
+{
+	struct bno055_priv *priv = file->private_data;
+	int rev, ver;
+	char *buf;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+	if (ret)
+		return ret;
+
+	buf = kasprintf(GFP_KERNEL, "ver: 0x%x, rev: 0x%x\n", ver, rev);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations bno055_fw_version_ops = {
+	.open = simple_open,
+	.read = bno055_show_fw_version,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static void bno055_debugfs_remove(void *_priv)
+{
+	struct bno055_priv *priv = _priv;
+
+	debugfs_remove(priv->debugfs);
+	priv->debugfs = NULL;
+}
+
+static void bno055_debugfs_init(struct iio_dev *iio_dev)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	priv->debugfs = debugfs_create_file("firmware_version", 0400,
+					    iio_get_debugfs_dentry(iio_dev),
+					    priv, &bno055_fw_version_ops);
+	if (!IS_ERR(priv->debugfs))
+		devm_add_action_or_reset(priv->dev, bno055_debugfs_remove,
+					 priv);
+	if (IS_ERR_OR_NULL(priv->debugfs))
+		dev_warn(priv->dev, "failed to setup debugfs");
+}
+
+static IIO_DEVICE_ATTR_RW(fusion_enable, 0);
+static IIO_DEVICE_ATTR_RW(in_magn_calibration_fast_enable, 0);
+static IIO_DEVICE_ATTR_RW(in_accel_range_raw, 0);
+
+static IIO_DEVICE_ATTR_RO(in_accel_range_raw_available, 0);
+static IIO_DEVICE_ATTR_RO(sys_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_accel_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_gyro_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_magn_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(serialnumber, 0);
+
+static struct attribute *bno055_attrs[] = {
+	&iio_dev_attr_in_accel_range_raw_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_range_raw.dev_attr.attr,
+	&iio_dev_attr_fusion_enable.dev_attr.attr,
+	&iio_dev_attr_in_magn_calibration_fast_enable.dev_attr.attr,
+	&iio_dev_attr_sys_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_accel_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_gyro_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_magn_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_serialnumber.dev_attr.attr,
+	NULL
+};
+
+static BIN_ATTR_RO(calibration_data, BNO055_CALDATA_LEN);
+
+static struct bin_attribute *bno055_bin_attrs[] = {
+	&bin_attr_calibration_data,
+	NULL
+};
+
+static const struct attribute_group bno055_attrs_group = {
+	.attrs = bno055_attrs,
+	.bin_attrs = bno055_bin_attrs,
+};
+
+static const struct iio_info bno055_info = {
+	.read_raw_multi = bno055_read_raw_multi,
+	.read_avail = bno055_read_avail,
+	.write_raw = bno055_write_raw,
+	.attrs = &bno055_attrs_group,
+	.debugfs_reg_access = bno055_debugfs_reg_access,
+};
+
+/*
+ * Reads len samples from the HW, stores them in buf starting from buf_idx,
+ * and applies mask to cull (skip) unneeded samples.
+ * Updates buf_idx incrementing with the number of stored samples.
+ * Samples from HW are transferred into buf, then in-place copy on buf is
+ * performed in order to cull samples that need to be skipped.
+ * This avoids copies of the first samples until we hit the 1st sample to skip,
+ * and also avoids having an extra bounce buffer.
+ * buf must be able to contain len elements in spite of how many samples we are
+ * going to cull.
+ */
+static int bno055_scan_xfer(struct bno055_priv *priv,
+			    int start_ch, int len, unsigned long mask,
+			    __le16 *buf, int *buf_idx)
+{
+	const int base = BNO055_ACC_DATA_X_LSB_REG;
+	bool quat_in_read = false;
+	int buf_base = *buf_idx;
+	__le16 *dst, *src;
+	int offs_fixup = 0;
+	int xfer_len = len;
+	int ret;
+	int i, n;
+
+	if (!mask)
+		return 0;
+
+	/*
+	 * All channels are made up 1 16-bit sample, except for quaternion that
+	 * is made up 4 16-bit values.
+	 * For us the quaternion CH is just like 4 regular CHs.
+	 * If our read starts past the quaternion make sure to adjust the
+	 * starting offset; if the quaternion is contained in our scan then make
+	 * sure to adjust the read len.
+	 */
+	if (start_ch > BNO055_SCAN_QUATERNION) {
+		start_ch += 3;
+	} else if ((start_ch <= BNO055_SCAN_QUATERNION) &&
+		 ((start_ch + len) > BNO055_SCAN_QUATERNION)) {
+		quat_in_read = true;
+		xfer_len += 3;
+	}
+
+	ret = regmap_bulk_read(priv->regmap,
+			       base + start_ch * sizeof(__le16),
+			       buf + buf_base,
+			       xfer_len * sizeof(__le16));
+	if (ret)
+		return ret;
+
+	for_each_set_bit(i, &mask, len) {
+		if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION))
+			offs_fixup = 3;
+
+		dst = buf + *buf_idx;
+		src = buf + buf_base + offs_fixup + i;
+
+		n = (start_ch + i == BNO055_SCAN_QUATERNION) ? 4 : 1;
+
+		if (dst != src)
+			memcpy(dst, src, n * sizeof(__le16));
+
+		*buf_idx += n;
+	}
+	return 0;
+}
+
+static irqreturn_t bno055_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio_dev = pf->indio_dev;
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int xfer_start, start, end, prev_end;
+	unsigned long mask;
+	int quat_extra_len;
+	bool first = true;
+	int buf_idx = 0;
+	bool thr_hit;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Walk the bitmap and eventually perform several transfers.
+	 * Bitmap ones-fields that are separated by gaps <= xfer_burst_break_thr
+	 * will be included in same transfer.
+	 * Every time the bitmap contains a gap wider than xfer_burst_break_thr
+	 * then we split the transfer, skipping the gap.
+	 */
+	for_each_set_bitrange(start, end, iio_dev->active_scan_mask,
+			      iio_dev->masklength) {
+		/*
+		 * First transfer will start from the beginning of the first
+		 * ones-field in the bitmap
+		 */
+		if (first) {
+			xfer_start = start;
+		} else {
+			/*
+			 * We found the next ones-field; check whether to
+			 * include it in * the current transfer or not (i.e.
+			 * let's perform the current * transfer and prepare for
+			 * another one).
+			 */
+
+			/*
+			 * In case the zeros-gap contains the quaternion bit,
+			 * then its length is actually 4 words instead of 1
+			 * (i.e. +3 wrt other channels).
+			 */
+			quat_extra_len = ((start > BNO055_SCAN_QUATERNION) &&
+					  (prev_end <= BNO055_SCAN_QUATERNION)) ? 3 : 0;
+
+			/* If the gap is wider than xfer_burst_break_thr then.. */
+			thr_hit = (start - prev_end + quat_extra_len) >
+				priv->xfer_burst_break_thr;
+
+			/*
+			 * .. transfer all the data up to the gap. Then set the
+			 * next transfer start index at right after the gap
+			 * (i.e. at the start of this ones-field).
+			 */
+			if (thr_hit) {
+				mask = *iio_dev->active_scan_mask >> xfer_start;
+				ret = bno055_scan_xfer(priv, xfer_start,
+						       prev_end - xfer_start,
+						       mask, priv->buf.chans, &buf_idx);
+				if (ret)
+					goto done;
+				xfer_start = start;
+			}
+		}
+		first = false;
+		prev_end = end;
+	}
+
+	/*
+	 * We finished walking the bitmap; no more gaps to check for. Just
+	 * perform the current transfer.
+	 */
+	mask = *iio_dev->active_scan_mask >> xfer_start;
+	ret = bno055_scan_xfer(priv, xfer_start,
+			       prev_end - xfer_start,
+			       mask, priv->buf.chans, &buf_idx);
+
+	if (!ret)
+		iio_push_to_buffers_with_timestamp(iio_dev,
+						   &priv->buf, pf->timestamp);
+done:
+	mutex_unlock(&priv->lock);
+	iio_trigger_notify_done(iio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int bno055_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	const unsigned long fusion_mask =
+		BIT(BNO055_SCAN_YAW) |
+		BIT(BNO055_SCAN_ROLL) |
+		BIT(BNO055_SCAN_PITCH) |
+		BIT(BNO055_SCAN_QUATERNION) |
+		BIT(BNO055_SCAN_LIA_X) |
+		BIT(BNO055_SCAN_LIA_Y) |
+		BIT(BNO055_SCAN_LIA_Z) |
+		BIT(BNO055_SCAN_GRAVITY_X) |
+		BIT(BNO055_SCAN_GRAVITY_Y) |
+		BIT(BNO055_SCAN_GRAVITY_Z);
+
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG &&
+	    bitmap_intersects(indio_dev->active_scan_mask, &fusion_mask,
+			      _BNO055_SCAN_MAX))
+		return -EBUSY;
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops bno055_buffer_setup_ops = {
+	.preenable = bno055_buffer_preenable,
+};
+
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr, bool sw_reset)
+{
+	const struct firmware *caldata = NULL;
+	struct bno055_priv *priv;
+	struct iio_dev *iio_dev;
+	char *fw_name_buf;
+	unsigned int val;
+	int rev, ver;
+	int ret;
+
+	iio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	iio_dev->name = "bno055";
+	priv = iio_priv(iio_dev);
+	mutex_init(&priv->lock);
+	priv->regmap = regmap;
+	priv->dev = dev;
+	priv->xfer_burst_break_thr = xfer_burst_break_thr;
+	priv->sw_reset = sw_reset;
+
+	priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n");
+
+	priv->clk = devm_clk_get_optional_enabled(dev, "clk");
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get CLK\n");
+
+	if (priv->reset_gpio) {
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(priv->reset_gpio, 1);
+		usleep_range(650000, 750000);
+	} else if (!sw_reset) {
+		dev_warn(dev, "No usable reset method; IMU may be unreliable\n");
+	}
+
+	ret = regmap_read(priv->regmap, BNO055_CHIP_ID_REG, &val);
+	if (ret)
+		return ret;
+
+	if (val != BNO055_CHIP_ID_MAGIC)
+		dev_warn(dev, "Unrecognized chip ID 0x%x\n", val);
+
+	/*
+	 * In case we haven't a HW reset pin, we can still reset the chip via
+	 * register write. This is probably nonsense in case we can't even
+	 * communicate with the chip or the chip isn't the one we expect (i.e.
+	 * we don't write to unknown chips), so we perform SW reset only after
+	 * chip magic ID check
+	 */
+	if (!priv->reset_gpio) {
+		ret = bno055_system_reset(priv);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+	if (ret)
+		return ret;
+
+	/*
+	 * The stock FW version contains a bug (see comment at the beginning of
+	 * this file) that causes the anglvel scale to be changed depending on
+	 * the chip range setting. We workaround this, but we don't know what
+	 * other FW versions might do.
+	 */
+	if (ver != 0x3 || rev != 0x11)
+		dev_warn(dev, "Untested firmware version. Anglvel scale may not work as expected\n");
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_UID_LOWER_REG,
+			       priv->uid, BNO055_UID_LEN);
+	if (ret)
+		return ret;
+
+	/* Sensor calibration data */
+	fw_name_buf = kasprintf(GFP_KERNEL, BNO055_FW_UID_FMT,
+				BNO055_UID_LEN, priv->uid);
+	if (!fw_name_buf)
+		return -ENOMEM;
+
+	ret = request_firmware(&caldata, fw_name_buf, dev);
+	kfree(fw_name_buf);
+	if (ret)
+		ret = request_firmware(&caldata, BNO055_FW_GENERIC_NAME, dev);
+	if (ret) {
+		dev_notice(dev, "Calibration file load failed. See instruction in kernel Documentation/iio/bno055.rst\n");
+		ret = bno055_init(priv, NULL, 0);
+	} else {
+		ret = bno055_init(priv, caldata->data, caldata->size);
+		release_firmware(caldata);
+	}
+	if (ret)
+		return ret;
+
+	priv->operation_mode = BNO055_OPR_MODE_FUSION;
+	ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bno055_uninit, priv);
+	if (ret)
+		return ret;
+
+	iio_dev->channels = bno055_channels;
+	iio_dev->num_channels = ARRAY_SIZE(bno055_channels);
+	iio_dev->info = &bno055_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = devm_iio_triggered_buffer_setup(dev, iio_dev,
+					      iio_pollfunc_store_time,
+					      bno055_trigger_handler,
+					      &bno055_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, iio_dev);
+	if (ret)
+		return ret;
+
+	bno055_debugfs_init(iio_dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(bno055_probe, IIO_BNO055);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
+MODULE_DESCRIPTION("Bosch BNO055 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055.h b/drivers/iio/imu/bno055/bno055.h
new file mode 100644
index 000000000000..64f9fc95cebc
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __BNO055_H__
+#define __BNO055_H__
+
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct device;
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr, bool sw_reset);
+extern const struct regmap_config bno055_regmap_config;
+
+#endif
diff --git a/drivers/iio/imu/bno055/bno055_i2c.c b/drivers/iio/imu/bno055/bno055_i2c.c
new file mode 100644
index 000000000000..c1bbc0fe34f9
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_i2c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for I2C-interfaced Bosch BNO055 IMU.
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bno055.h"
+
+#define BNO055_I2C_XFER_BURST_BREAK_THRESHOLD 3
+
+static int bno055_i2c_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &bno055_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap),
+				     "Unable to init register map");
+
+	return bno055_probe(&client->dev, regmap,
+			    BNO055_I2C_XFER_BURST_BREAK_THRESHOLD, true);
+}
+
+static const struct i2c_device_id bno055_i2c_id[] = {
+	{"bno055", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bno055_i2c_id);
+
+static const struct of_device_id __maybe_unused bno055_i2c_of_match[] = {
+	{ .compatible = "bosch,bno055" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bno055_i2c_of_match);
+
+static struct i2c_driver bno055_driver = {
+	.driver = {
+		.name = "bno055-i2c",
+		.of_match_table = bno055_i2c_of_match,
+	},
+	.probe_new = bno055_i2c_probe,
+	.id_table = bno055_i2c_id,
+};
+module_i2c_driver(bno055_driver);
+
+MODULE_AUTHOR("Andrea Merello");
+MODULE_DESCRIPTION("Bosch BNO055 I2C interface");
+MODULE_IMPORT_NS(IIO_BNO055);
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055_ser_core.c b/drivers/iio/imu/bno055/bno055_ser_core.c
new file mode 100644
index 000000000000..57728a568471
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_core.c
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Serial line interface for Bosh BNO055 IMU (via serdev).
+ * This file implements serial communication up to the register read/write
+ * level.
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ *
+ * This driver is based on
+ *	Plantower PMS7003 particulate matter sensor driver
+ *	Which is
+ *	Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/serdev.h>
+
+#include "bno055_ser_trace.h"
+#include "bno055.h"
+
+/*
+ * Register writes cmd have the following format
+ * +------+------+-----+-----+----- ... ----+
+ * | 0xAA | 0xOO | REG | LEN | payload[LEN] |
+ * +------+------+-----+-----+----- ... ----+
+ *
+ * Register write responses have the following format
+ * +------+----------+
+ * | 0xEE | ERROCODE |
+ * +------+----------+
+ *
+ * .. except when writing the SYS_RST bit (i.e. triggering a system reset); in
+ * case the IMU accepts the command, then it resets without responding. We don't
+ * handle this (yet) here (so we inform the common bno055 code not to perform
+ * sw resets - bno055 on serial bus basically requires the hw reset pin).
+ *
+ * Register read have the following format
+ * +------+------+-----+-----+
+ * | 0xAA | 0xO1 | REG | LEN |
+ * +------+------+-----+-----+
+ *
+ * Successful register read response have the following format
+ * +------+-----+----- ... ----+
+ * | 0xBB | LEN | payload[LEN] |
+ * +------+-----+----- ... ----+
+ *
+ * Failed register read response have the following format
+ * +------+--------+
+ * | 0xEE | ERRCODE|  (ERRCODE always > 1)
+ * +------+--------+
+ *
+ * Error codes are
+ * 01: OK
+ * 02: read/write FAIL
+ * 04: invalid address
+ * 05: write on RO
+ * 06: wrong start byte
+ * 07: bus overrun
+ * 08: len too high
+ * 09: len too low
+ * 10: bus RX byte timeout (timeout is 30mS)
+ *
+ *
+ * **WORKAROUND ALERT**
+ *
+ * Serial communication seems very fragile: the BNO055 buffer seems to overflow
+ * very easy; BNO055 seems able to sink few bytes, then it needs a brief pause.
+ * On the other hand, it is also picky on timeout: if there is a pause > 30mS in
+ * between two bytes then the transaction fails (IMU internal RX FSM resets).
+ *
+ * BNO055 has been seen also failing to process commands in case we send them
+ * too close each other (or if it is somehow busy?)
+ *
+ * In particular I saw these scenarios:
+ * 1) If we send 2 bytes per time, then the IMU never(?) overflows.
+ * 2) If we send 4 bytes per time (i.e. the full header), then the IMU could
+ *    overflow, but it seem to sink all 4 bytes, then it returns error.
+ * 3) If we send more than 4 bytes, the IMU could overflow, and I saw it sending
+ *    error after 4 bytes are sent; we have troubles in synchronizing again,
+ *    because we are still sending data, and the IMU interprets it as the 1st
+ *    byte of a new command.
+ *
+ * While we must avoid case 3, we could send 4 bytes per time and eventually
+ * retry in case of failure; this seemed convenient for reads (which requires
+ * TXing exactly 4 bytes), however it has been seen that, depending by the IMU
+ * settings (e.g. LPF), failures became less or more frequent; in certain IMU
+ * configurations they are very rare, but in certain others we keeps failing
+ * even after like 30 retries.
+ *
+ * So, we just split TXes in [2-bytes + delay] steps, and still keep an eye on
+ * the IMU response; in case it overflows (which is now unlikely), we retry.
+ */
+
+/*
+ * Read operation overhead:
+ *  4 bytes req + 2byte resp hdr.
+ *  6 bytes = 60 bit (considering 1start + 1stop bits).
+ *  60/115200 = ~520uS + about 2500mS delay -> ~3mS
+ * In 3mS we could read back about 34 bytes that means 17 samples, this means
+ * that in case of scattered reads in which the gap is 17 samples or less it is
+ * still convenient to go for a burst.
+ * We have to take into account also IMU response time - IMU seems to be often
+ * reasonably quick to respond, but sometimes it seems to be in some "critical
+ * section" in which it delays handling of serial protocol. Because of this we
+ * round-up to 22, which is the max number of samples, always bursting indeed.
+ */
+#define BNO055_SER_XFER_BURST_BREAK_THRESHOLD 22
+
+struct bno055_ser_priv {
+	enum {
+		CMD_NONE,
+		CMD_READ,
+		CMD_WRITE,
+	} expect_response;
+	int expected_data_len;
+	u8 *response_buf;
+
+	/**
+	 * enum cmd_status - represent the status of a command sent to the HW.
+	 * @STATUS_CRIT: The command failed: the serial communication failed.
+	 * @STATUS_OK:   The command executed successfully.
+	 * @STATUS_FAIL: The command failed: HW responded with an error.
+	 */
+	enum {
+		STATUS_CRIT = -1,
+		STATUS_OK = 0,
+		STATUS_FAIL = 1,
+	} cmd_status;
+
+	/*
+	 * Protects all the above fields, which are accessed in behalf of both
+	 * the serdev RX callback and the regmap side
+	 */
+	struct mutex lock;
+
+	/* Only accessed in serdev RX callback context*/
+	struct {
+		enum {
+			RX_IDLE,
+			RX_START,
+			RX_DATA,
+		} state;
+		int databuf_count;
+		int expected_len;
+		int type;
+	} rx;
+
+	/* Never accessed in behalf of serdev RX callback context */
+	bool cmd_stale;
+
+	struct completion cmd_complete;
+	struct serdev_device *serdev;
+};
+
+static int bno055_ser_send_chunk(struct bno055_ser_priv *priv, const u8 *data, int len)
+{
+	int ret;
+
+	trace_send_chunk(len, data);
+	ret = serdev_device_write(priv->serdev, data, len, msecs_to_jiffies(25));
+	if (ret < 0)
+		return ret;
+
+	if (ret < len)
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Send a read or write command.
+ * 'data' can be NULL (used in read case). 'len' parameter is always valid; in
+ * case 'data' is non-NULL then it must match 'data' size.
+ */
+static int bno055_ser_do_send_cmd(struct bno055_ser_priv *priv,
+				  bool read, int addr, int len, const u8 *data)
+{
+	u8 hdr[] = {0xAA, read, addr, len};
+	int chunk_len;
+	int ret;
+
+	ret = bno055_ser_send_chunk(priv, hdr, 2);
+	if (ret)
+		goto fail;
+	usleep_range(2000, 3000);
+	ret = bno055_ser_send_chunk(priv, hdr + 2, 2);
+	if (ret)
+		goto fail;
+
+	if (read)
+		return 0;
+
+	while (len) {
+		chunk_len = min(len, 2);
+		usleep_range(2000, 3000);
+		ret = bno055_ser_send_chunk(priv, data, chunk_len);
+		if (ret)
+			goto fail;
+		data += chunk_len;
+		len -= chunk_len;
+	}
+
+	return 0;
+fail:
+	/* waiting more than 30mS should clear the BNO055 internal state */
+	usleep_range(40000, 50000);
+	return ret;
+}
+
+static int bno055_ser_send_cmd(struct bno055_ser_priv *priv,
+			       bool read, int addr, int len, const u8 *data)
+{
+	const int retry_max = 5;
+	int retry = retry_max;
+	int ret = 0;
+
+	/*
+	 * In case previous command was interrupted we still need to wait it to
+	 * complete before we can issue new commands
+	 */
+	if (priv->cmd_stale) {
+		ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete,
+								msecs_to_jiffies(100));
+		if (ret == -ERESTARTSYS)
+			return -ERESTARTSYS;
+
+		priv->cmd_stale = false;
+		/* if serial protocol broke, bail out */
+		if (priv->cmd_status == STATUS_CRIT)
+			return -EIO;
+	}
+
+	/*
+	 * Try to convince the IMU to cooperate.. as explained in the comments
+	 * at the top of this file, the IMU could also refuse the command (i.e.
+	 * it is not ready yet); retry in this case.
+	 */
+	do {
+		mutex_lock(&priv->lock);
+		priv->expect_response = read ? CMD_READ : CMD_WRITE;
+		reinit_completion(&priv->cmd_complete);
+		mutex_unlock(&priv->lock);
+
+		if (retry != retry_max)
+			trace_cmd_retry(read, addr, retry_max - retry);
+		ret = bno055_ser_do_send_cmd(priv, read, addr, len, data);
+		if (ret)
+			continue;
+
+		ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete,
+								msecs_to_jiffies(100));
+		if (ret == -ERESTARTSYS) {
+			priv->cmd_stale = true;
+			return -ERESTARTSYS;
+		}
+
+		if (!ret)
+			return -ETIMEDOUT;
+
+		if (priv->cmd_status == STATUS_OK)
+			return 0;
+		if (priv->cmd_status == STATUS_CRIT)
+			return -EIO;
+
+		/* loop in case priv->cmd_status == STATUS_FAIL */
+	} while (--retry);
+
+	if (ret < 0)
+		return ret;
+	if (priv->cmd_status == STATUS_FAIL)
+		return -EINVAL;
+	return 0;
+}
+
+static int bno055_ser_write_reg(void *context, const void *_data, size_t count)
+{
+	const u8 *data = _data;
+	struct bno055_ser_priv *priv = context;
+
+	if (count < 2) {
+		dev_err(&priv->serdev->dev, "Invalid write count %zu", count);
+		return -EINVAL;
+	}
+
+	trace_write_reg(data[0], data[1]);
+	return bno055_ser_send_cmd(priv, 0, data[0], count - 1, data + 1);
+}
+
+static int bno055_ser_read_reg(void *context,
+			       const void *_reg, size_t reg_size,
+			       void *val, size_t val_size)
+{
+	int ret;
+	int reg_addr;
+	const u8 *reg = _reg;
+	struct bno055_ser_priv *priv = context;
+
+	if (val_size > 128) {
+		dev_err(&priv->serdev->dev, "Invalid read valsize %zu", val_size);
+		return -EINVAL;
+	}
+
+	reg_addr = *reg;
+	trace_read_reg(reg_addr, val_size);
+	mutex_lock(&priv->lock);
+	priv->expected_data_len = val_size;
+	priv->response_buf = val;
+	mutex_unlock(&priv->lock);
+
+	ret = bno055_ser_send_cmd(priv, 1, reg_addr, val_size, NULL);
+
+	mutex_lock(&priv->lock);
+	priv->response_buf = NULL;
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+/*
+ * Handler for received data; this is called from the receiver callback whenever
+ * it got some packet from the serial bus. The status tells us whether the
+ * packet is valid (i.e. header ok && received payload len consistent wrt the
+ * header). It's now our responsibility to check whether this is what we
+ * expected, of whether we got some unexpected, yet valid, packet.
+ */
+static void bno055_ser_handle_rx(struct bno055_ser_priv *priv, int status)
+{
+	mutex_lock(&priv->lock);
+	switch (priv->expect_response) {
+	case CMD_NONE:
+		dev_warn(&priv->serdev->dev, "received unexpected, yet valid, data from sensor");
+		mutex_unlock(&priv->lock);
+		return;
+
+	case CMD_READ:
+		priv->cmd_status = status;
+		if (status == STATUS_OK &&
+		    priv->rx.databuf_count != priv->expected_data_len) {
+			/*
+			 * If we got here, then the lower layer serial protocol
+			 * seems consistent with itself; if we got an unexpected
+			 * amount of data then signal it as a non critical error
+			 */
+			priv->cmd_status = STATUS_FAIL;
+			dev_warn(&priv->serdev->dev,
+				 "received an unexpected amount of, yet valid, data from sensor");
+		}
+		break;
+
+	case CMD_WRITE:
+		priv->cmd_status = status;
+		break;
+	}
+
+	priv->expect_response = CMD_NONE;
+	mutex_unlock(&priv->lock);
+	complete(&priv->cmd_complete);
+}
+
+/*
+ * Serdev receiver FSM. This tracks the serial communication and parse the
+ * header. It pushes packets to bno055_ser_handle_rx(), eventually communicating
+ * failures (i.e. malformed packets).
+ * Ideally it doesn't know anything about upper layer (i.e. if this is the
+ * packet we were really expecting), but since we copies the payload into the
+ * receiver buffer (that is not valid when i.e. we don't expect data), we
+ * snoop a bit in the upper layer..
+ * Also, we assume to RX one pkt per time (i.e. the HW doesn't send anything
+ * unless we require to AND we don't queue more than one request per time).
+ */
+static int bno055_ser_receive_buf(struct serdev_device *serdev,
+				  const unsigned char *buf, size_t size)
+{
+	int status;
+	struct bno055_ser_priv *priv = serdev_device_get_drvdata(serdev);
+	int remaining = size;
+
+	if (size == 0)
+		return 0;
+
+	trace_recv(size, buf);
+	switch (priv->rx.state) {
+	case RX_IDLE:
+		/*
+		 * New packet.
+		 * Check for its 1st byte that identifies the pkt type.
+		 */
+		if (buf[0] != 0xEE && buf[0] != 0xBB) {
+			dev_err(&priv->serdev->dev,
+				"Invalid packet start %x", buf[0]);
+			bno055_ser_handle_rx(priv, STATUS_CRIT);
+			break;
+		}
+		priv->rx.type = buf[0];
+		priv->rx.state = RX_START;
+		remaining--;
+		buf++;
+		priv->rx.databuf_count = 0;
+		fallthrough;
+
+	case RX_START:
+		/*
+		 * Packet RX in progress, we expect either 1-byte len or 1-byte
+		 * status depending by the packet type.
+		 */
+		if (remaining == 0)
+			break;
+
+		if (priv->rx.type == 0xEE) {
+			if (remaining > 1) {
+				dev_err(&priv->serdev->dev, "EE pkt. Extra data received");
+				status = STATUS_CRIT;
+			} else {
+				status = (buf[0] == 1) ? STATUS_OK : STATUS_FAIL;
+			}
+			bno055_ser_handle_rx(priv, status);
+			priv->rx.state = RX_IDLE;
+			break;
+
+		} else {
+			/*priv->rx.type == 0xBB */
+			priv->rx.state = RX_DATA;
+			priv->rx.expected_len = buf[0];
+			remaining--;
+			buf++;
+		}
+		fallthrough;
+
+	case RX_DATA:
+		/* Header parsed; now receiving packet data payload */
+		if (remaining == 0)
+			break;
+
+		if (priv->rx.databuf_count + remaining > priv->rx.expected_len) {
+			/*
+			 * This is an inconsistency in serial protocol, we lost
+			 * sync and we don't know how to handle further data
+			 */
+			dev_err(&priv->serdev->dev, "BB pkt. Extra data received");
+			bno055_ser_handle_rx(priv, STATUS_CRIT);
+			priv->rx.state = RX_IDLE;
+			break;
+		}
+
+		mutex_lock(&priv->lock);
+		/*
+		 * NULL e.g. when read cmd is stale or when no read cmd is
+		 * actually pending.
+		 */
+		if (priv->response_buf &&
+		    /*
+		     * Snoop on the upper layer protocol stuff to make sure not
+		     * to write to an invalid memory. Apart for this, let's the
+		     * upper layer manage any inconsistency wrt expected data
+		     * len (as long as the serial protocol is consistent wrt
+		     * itself (i.e. response header is consistent with received
+		     * response len.
+		     */
+		    (priv->rx.databuf_count + remaining <= priv->expected_data_len))
+			memcpy(priv->response_buf + priv->rx.databuf_count,
+			       buf, remaining);
+		mutex_unlock(&priv->lock);
+
+		priv->rx.databuf_count += remaining;
+
+		/*
+		 * Reached expected len advertised by the IMU for the current
+		 * packet. Pass it to the upper layer (for us it is just valid).
+		 */
+		if (priv->rx.databuf_count == priv->rx.expected_len) {
+			bno055_ser_handle_rx(priv, STATUS_OK);
+			priv->rx.state = RX_IDLE;
+		}
+		break;
+	}
+
+	return size;
+}
+
+static const struct serdev_device_ops bno055_ser_serdev_ops = {
+	.receive_buf = bno055_ser_receive_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static struct regmap_bus bno055_ser_regmap_bus = {
+	.write = bno055_ser_write_reg,
+	.read = bno055_ser_read_reg,
+};
+
+static int bno055_ser_probe(struct serdev_device *serdev)
+{
+	struct bno055_ser_priv *priv;
+	struct regmap *regmap;
+	int ret;
+
+	priv = devm_kzalloc(&serdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	serdev_device_set_drvdata(serdev, priv);
+	priv->serdev = serdev;
+	mutex_init(&priv->lock);
+	init_completion(&priv->cmd_complete);
+
+	serdev_device_set_client_ops(serdev, &bno055_ser_serdev_ops);
+	ret = devm_serdev_device_open(&serdev->dev, serdev);
+	if (ret)
+		return ret;
+
+	if (serdev_device_set_baudrate(serdev, 115200) != 115200) {
+		dev_err(&serdev->dev, "Cannot set required baud rate");
+		return -EIO;
+	}
+
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret) {
+		dev_err(&serdev->dev, "Cannot set required parity setting");
+		return ret;
+	}
+	serdev_device_set_flow_control(serdev, false);
+
+	regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
+				  priv, &bno055_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&serdev->dev, PTR_ERR(regmap),
+				     "Unable to init register map");
+
+	return bno055_probe(&serdev->dev, regmap,
+			    BNO055_SER_XFER_BURST_BREAK_THRESHOLD, false);
+}
+
+static const struct of_device_id bno055_ser_of_match[] = {
+	{ .compatible = "bosch,bno055" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bno055_ser_of_match);
+
+static struct serdev_device_driver bno055_ser_driver = {
+	.driver = {
+		.name = "bno055-ser",
+		.of_match_table = bno055_ser_of_match,
+	},
+	.probe = bno055_ser_probe,
+};
+module_serdev_device_driver(bno055_ser_driver);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
+MODULE_DESCRIPTION("Bosch BNO055 serdev interface");
+MODULE_IMPORT_NS(IIO_BNO055);
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.c b/drivers/iio/imu/bno055/bno055_ser_trace.c
new file mode 100644
index 000000000000..48397b66daef
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_trace.c
@@ -0,0 +1,14 @@
+//SPDX-License-Identifier: GPL-2.0
+
+/*
+ * bno055_ser Trace Support
+ * Copyright (C) 2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ *
+ * Based on:
+ *   Device core Trace Support
+ *   Copyright (C) 2021, Intel Corporation
+ */
+
+#define CREATE_TRACE_POINTS
+#include "bno055_ser_trace.h"
diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.h b/drivers/iio/imu/bno055/bno055_ser_trace.h
new file mode 100644
index 000000000000..7d9eae166eec
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_trace.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#if !defined(__BNO055_SERDEV_TRACE_H__) || defined(TRACE_HEADER_MULTI_READ)
+#define __BNO055_SERDEV_TRACE_H__
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM bno055_ser
+
+TRACE_EVENT(send_chunk,
+	    TP_PROTO(int len, const u8 *data),
+	    TP_ARGS(len, data),
+	    TP_STRUCT__entry(
+		    __field(int, len)
+		    __dynamic_array(u8, chunk, len)
+	    ),
+	    TP_fast_assign(
+		    __entry->len = len;
+		    memcpy(__get_dynamic_array(chunk),
+			   data, __entry->len);
+	    ),
+	    TP_printk("len: %d, data: = %*ph",
+		      __entry->len, __entry->len, __get_dynamic_array(chunk)
+	    )
+);
+
+TRACE_EVENT(cmd_retry,
+	    TP_PROTO(bool read, int addr, int retry),
+	    TP_ARGS(read, addr, retry),
+	    TP_STRUCT__entry(
+		    __field(bool, read)
+		    __field(int, addr)
+		    __field(int, retry)
+	    ),
+	    TP_fast_assign(
+		    __entry->read = read;
+		    __entry->addr = addr;
+		    __entry->retry = retry;
+	    ),
+	    TP_printk("%s addr 0x%x retry #%d",
+		      __entry->read ? "read" : "write",
+		      __entry->addr, __entry->retry
+	    )
+);
+
+TRACE_EVENT(write_reg,
+	    TP_PROTO(u8 addr, u8 value),
+	    TP_ARGS(addr, value),
+	    TP_STRUCT__entry(
+		    __field(u8, addr)
+		    __field(u8, value)
+	    ),
+	    TP_fast_assign(
+		    __entry->addr = addr;
+		    __entry->value = value;
+	    ),
+	    TP_printk("reg 0x%x = 0x%x",
+		      __entry->addr, __entry->value
+	    )
+);
+
+TRACE_EVENT(read_reg,
+	    TP_PROTO(int addr, size_t len),
+	    TP_ARGS(addr, len),
+	    TP_STRUCT__entry(
+		    __field(int, addr)
+		    __field(size_t, len)
+	    ),
+	    TP_fast_assign(
+		    __entry->addr = addr;
+		    __entry->len = len;
+	    ),
+	    TP_printk("reg 0x%x (len %zu)",
+		      __entry->addr, __entry->len
+	    )
+);
+
+TRACE_EVENT(recv,
+	    TP_PROTO(size_t len, const unsigned char *buf),
+	    TP_ARGS(len, buf),
+	    TP_STRUCT__entry(
+		    __field(size_t, len)
+		    __dynamic_array(unsigned char, buf, len)
+	    ),
+	    TP_fast_assign(
+		    __entry->len = len;
+		    memcpy(__get_dynamic_array(buf),
+			   buf, __entry->len);
+	    ),
+	    TP_printk("len: %zu, data: = %*ph",
+		      __entry->len, (int)__entry->len, __get_dynamic_array(buf)
+	    )
+);
+
+#endif /* __BNO055_SERDEV_TRACE_H__ || TRACE_HEADER_MULTI_READ */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE bno055_ser_trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
index 9b4298095d3f..f7bce428d9eb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -65,7 +65,7 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev,
 
 			sub_elem = &elem->package.elements[j];
 			if (sub_elem->type == ACPI_TYPE_STRING)
-				strlcpy(info->type, sub_elem->string.pointer,
+				strscpy(info->type, sub_elem->string.pointer,
 					sizeof(info->type));
 			else if (sub_elem->type == ACPI_TYPE_INTEGER) {
 				if (sub_elem->integer.value != client->addr) {
@@ -158,7 +158,7 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
 				char *name;
 
 				info.addr = secondary;
-				strlcpy(info.type, dev_name(&adev->dev),
+				strscpy(info.type, dev_name(&adev->dev),
 					sizeof(info.type));
 				name = strchr(info.type, ':');
 				if (name)
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index fefd0b939100..2ed2b3f40c0b 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
 	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
-	  lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop,
+	  lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
 	  the accelerometer/gyroscope of lsm9ds1 and lsm6dst.
 
 	  To compile this driver as a module, choose M here: the module
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index a86dd29a4738..6b57d47be69e 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -32,6 +32,7 @@
 #define ST_LSM6DST_DEV_NAME	"lsm6dst"
 #define ST_LSM6DSOP_DEV_NAME	"lsm6dsop"
 #define ST_ASM330LHHX_DEV_NAME	"asm330lhhx"
+#define ST_LSM6DSTX_DEV_NAME	"lsm6dstx"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,
@@ -51,6 +52,7 @@ enum st_lsm6dsx_hw_id {
 	ST_LSM6DST_ID,
 	ST_LSM6DSOP_ID,
 	ST_ASM330LHHX_ID,
+	ST_LSM6DSTX_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index c7d3730ab1c5..e49f2d120ed3 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -15,7 +15,7 @@
  * value of the decimation factor and ODR set for each FIFO data set.
  *
  * LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/
- * LSM6DST/LSM6DSOP:
+ * LSM6DST/LSM6DSOP/LSM6DSTX:
  * The FIFO buffer can be configured to store data from gyroscope and
  * accelerometer. Each sample is queued with a tag (1B) indicating data
  * source (gyroscope, accelerometer, hw timer).
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b5e4a4113652..f8bbb005718e 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -26,7 +26,8 @@
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 4KB
  *
- * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP:
+ * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
+ *   LSM6DSTX:
  *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
  *     833
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
@@ -791,6 +792,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.hw_id = ST_ASM330LHHX_ID,
 				.name = ST_ASM330LHHX_DEV_NAME,
 				.wai = 0x6b,
+			}, {
+				.hw_id = ST_LSM6DSTX_ID,
+				.name = ST_LSM6DSTX_DEV_NAME,
+				.wai = 0x6d,
 			},
 		},
 		.channels = {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 2ea34c0d3a8c..307c8c436862 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,asm330lhhx",
 		.data = (void *)ST_ASM330LHHX_ID,
 	},
+	{
+		.compatible = "st,lsm6dstx",
+		.data = (void *)ST_LSM6DSTX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -127,6 +131,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
 	{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
 	{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 6a8883f022a8..6a4eecf4bb05 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,asm330lhhx",
 		.data = (void *)ST_ASM330LHHX_ID,
 	},
+	{
+		.compatible = "st,lsm6dstx",
+		.data = (void *)ST_LSM6DSTX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -127,6 +131,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
 	{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
 	{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index acc2b6c05d57..228598b82a2f 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -843,8 +843,8 @@ static int iio_verify_update(struct iio_dev *indio_dev,
 	 * to verify.
 	 */
 	if (remove_buffer && !insert_buffer &&
-		list_is_singular(&iio_dev_opaque->buffer_list))
-			return 0;
+	    list_is_singular(&iio_dev_opaque->buffer_list))
+		return 0;
 
 	modes = indio_dev->modes;
 
@@ -940,6 +940,7 @@ struct iio_demux_table {
 static void iio_buffer_demux_free(struct iio_buffer *buffer)
 {
 	struct iio_demux_table *p, *q;
+
 	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
 		list_del(&p->l);
 		kfree(p);
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 0f4dbda3b9d3..151ff3993354 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -134,6 +134,12 @@ static const char * const iio_modifier_names[] = {
 	[IIO_MOD_ETHANOL] = "ethanol",
 	[IIO_MOD_H2] = "h2",
 	[IIO_MOD_O2] = "o2",
+	[IIO_MOD_LINEAR_X] = "linear_x",
+	[IIO_MOD_LINEAR_Y] = "linear_y",
+	[IIO_MOD_LINEAR_Z] = "linear_z",
+	[IIO_MOD_PITCH] = "pitch",
+	[IIO_MOD_YAW] = "yaw",
+	[IIO_MOD_ROLL] = "roll",
 };
 
 /* relies on pairs of these shared then separate */
@@ -168,6 +174,7 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio",
 	[IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type",
 	[IIO_CHAN_INFO_CALIBAMBIENT] = "calibambient",
+	[IIO_CHAN_INFO_ZEROPOINT] = "zeropoint",
 };
 /**
  * iio_device_id() - query the unique ID for the device
@@ -236,6 +243,7 @@ static int iio_sysfs_match_string_with_gaps(const char * const *array, size_t n,
 struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
+
 	return iio_dev_opaque->debugfs_dentry;
 }
 EXPORT_SYMBOL_GPL(iio_get_debugfs_dentry);
@@ -447,6 +455,7 @@ static const struct file_operations iio_debugfs_reg_fops = {
 static void iio_device_unregister_debugfs(struct iio_dev *indio_dev)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
+
 	debugfs_remove_recursive(iio_dev_opaque->debugfs_dentry);
 }
 
@@ -1021,6 +1030,7 @@ int __iio_device_attr_init(struct device_attribute *dev_attr,
 	int ret = 0;
 	char *name = NULL;
 	char *full_postfix;
+
 	sysfs_attr_init(&dev_attr->attr);
 
 	/* Build up postfix of <extend_name>_<modifier>_postfix */
@@ -1299,8 +1309,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
 
 	ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
 						  IIO_SEPARATE,
-						  &chan->
-						  info_mask_separate_available);
+						  &chan->info_mask_separate_available);
 	if (ret < 0)
 		return ret;
 	attrcount += ret;
@@ -1314,8 +1323,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
 
 	ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
 						  IIO_SHARED_BY_TYPE,
-						  &chan->
-						  info_mask_shared_by_type_available);
+						  &chan->info_mask_shared_by_type_available);
 	if (ret < 0)
 		return ret;
 	attrcount += ret;
@@ -1355,6 +1363,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
 
 	if (chan->ext_info) {
 		unsigned int i = 0;
+
 		for (ext_info = chan->ext_info; ext_info->name; ext_info++) {
 			ret = __iio_add_chan_devattr(ext_info->name,
 					chan,
@@ -1403,6 +1412,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+
 	return sysfs_emit(buf, "%s\n", indio_dev->name);
 }
 
@@ -1412,6 +1422,7 @@ static ssize_t label_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+
 	return sysfs_emit(buf, "%s\n", indio_dev->label);
 }
 
@@ -1565,7 +1576,7 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
 		ret = -ENOMEM;
 		goto error_clear_attrs;
 	}
-	/* Copy across original attributes */
+	/* Copy across original attributes, and point to original binary attributes */
 	if (indio_dev->info->attrs) {
 		memcpy(iio_dev_opaque->chan_attr_group.attrs,
 		       indio_dev->info->attrs->attrs,
@@ -1573,6 +1584,8 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
 		       *attrcount_orig);
 		iio_dev_opaque->chan_attr_group.is_visible =
 			indio_dev->info->attrs->is_visible;
+		iio_dev_opaque->chan_attr_group.bin_attrs =
+			indio_dev->info->attrs->bin_attrs;
 	}
 	attrn = attrcount_orig;
 	/* Add all elements from the list. */
@@ -1621,6 +1634,8 @@ static void iio_dev_release(struct device *device)
 
 	iio_device_detach_buffers(indio_dev);
 
+	lockdep_unregister_key(&iio_dev_opaque->mlock_key);
+
 	ida_free(&iio_ida, iio_dev_opaque->id);
 	kfree(iio_dev_opaque);
 }
@@ -1680,6 +1695,9 @@ struct iio_dev *iio_device_alloc(struct device *parent, int sizeof_priv)
 	INIT_LIST_HEAD(&iio_dev_opaque->buffer_list);
 	INIT_LIST_HEAD(&iio_dev_opaque->ioctl_handlers);
 
+	lockdep_register_key(&iio_dev_opaque->mlock_key);
+	lockdep_set_class(&indio_dev->mlock, &iio_dev_opaque->mlock_key);
+
 	return indio_dev;
 }
 EXPORT_SYMBOL(iio_device_alloc);
@@ -1777,6 +1795,7 @@ static int iio_chrdev_release(struct inode *inode, struct file *filp)
 	struct iio_dev_opaque *iio_dev_opaque =
 		container_of(inode->i_cdev, struct iio_dev_opaque, chrdev);
 	struct iio_dev *indio_dev = &iio_dev_opaque->indio_dev;
+
 	kfree(ib);
 	clear_bit(IIO_BUSY_BIT_POS, &iio_dev_opaque->flags);
 	iio_device_put(indio_dev);
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index b5e059e15b0a..3d78da2531a9 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -231,12 +231,15 @@ static const char * const iio_ev_type_text[] = {
 	[IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
 	[IIO_EV_TYPE_CHANGE] = "change",
 	[IIO_EV_TYPE_MAG_REFERENCED] = "mag_referenced",
+	[IIO_EV_TYPE_GESTURE] = "gesture",
 };
 
 static const char * const iio_ev_dir_text[] = {
 	[IIO_EV_DIR_EITHER] = "either",
 	[IIO_EV_DIR_RISING] = "rising",
-	[IIO_EV_DIR_FALLING] = "falling"
+	[IIO_EV_DIR_FALLING] = "falling",
+	[IIO_EV_DIR_SINGLETAP] = "singletap",
+	[IIO_EV_DIR_DOUBLETAP] = "doubletap",
 };
 
 static const char * const iio_ev_info_text[] = {
@@ -247,6 +250,8 @@ static const char * const iio_ev_info_text[] = {
 	[IIO_EV_INFO_HIGH_PASS_FILTER_3DB] = "high_pass_filter_3db",
 	[IIO_EV_INFO_LOW_PASS_FILTER_3DB] = "low_pass_filter_3db",
 	[IIO_EV_INFO_TIMEOUT] = "timeout",
+	[IIO_EV_INFO_RESET_TIMEOUT] = "reset_timeout",
+	[IIO_EV_INFO_TAP2_MIN_DELAY] = "tap2_min_delay",
 };
 
 static enum iio_event_direction iio_ev_attr_dir(struct iio_dev_attr *attr)
@@ -354,9 +359,10 @@ static int iio_device_add_event(struct iio_dev *indio_dev,
 	enum iio_shared_by shared_by, const unsigned long *mask)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
-	ssize_t (*show)(struct device *, struct device_attribute *, char *);
-	ssize_t (*store)(struct device *, struct device_attribute *,
-		const char *, size_t);
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+		char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t len);
 	unsigned int attrcount = 0;
 	unsigned int i;
 	char *postfix;
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index b78814d869b7..6885a186fe27 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -50,6 +50,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
 	struct iio_trigger *trig = to_iio_trigger(dev);
+
 	return sysfs_emit(buf, "%s\n", trig->name);
 }
 
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index df74765d33dc..872fd5c24147 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -5,9 +5,9 @@
  */
 #include <linux/err.h>
 #include <linux/export.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/iio-opaque.h>
@@ -45,13 +45,13 @@ int iio_map_array_register(struct iio_dev *indio_dev, struct iio_map *maps)
 	int i = 0, ret = 0;
 	struct iio_map_internal *mapi;
 
-	if (maps == NULL)
+	if (!maps)
 		return 0;
 
 	mutex_lock(&iio_map_list_lock);
-	while (maps[i].consumer_dev_name != NULL) {
+	while (maps[i].consumer_dev_name) {
 		mapi = kzalloc(sizeof(*mapi), GFP_KERNEL);
-		if (mapi == NULL) {
+		if (!mapi) {
 			ret = -ENOMEM;
 			goto error_ret;
 		}
@@ -69,7 +69,6 @@ error_ret:
 }
 EXPORT_SYMBOL_GPL(iio_map_array_register);
 
-
 /*
  * Remove all map entries associated with the given iio device
  */
@@ -117,15 +116,8 @@ static const struct iio_chan_spec
 	return chan;
 }
 
-#ifdef CONFIG_OF
-
-static int iio_dev_node_match(struct device *dev, const void *data)
-{
-	return dev->of_node == data && dev->type == &iio_device_type;
-}
-
 /**
- * __of_iio_simple_xlate - translate iiospec to the IIO channel index
+ * __fwnode_iio_simple_xlate - translate iiospec to the IIO channel index
  * @indio_dev:	pointer to the iio_dev structure
  * @iiospec:	IIO specifier as found in the device tree
  *
@@ -134,14 +126,14 @@ static int iio_dev_node_match(struct device *dev, const void *data)
  * whether IIO index is less than num_channels (that is specified in the
  * iio_dev).
  */
-static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
-				const struct of_phandle_args *iiospec)
+static int __fwnode_iio_simple_xlate(struct iio_dev *indio_dev,
+				     const struct fwnode_reference_args *iiospec)
 {
-	if (!iiospec->args_count)
+	if (!iiospec->nargs)
 		return 0;
 
 	if (iiospec->args[0] >= indio_dev->num_channels) {
-		dev_err(&indio_dev->dev, "invalid channel index %u\n",
+		dev_err(&indio_dev->dev, "invalid channel index %llu\n",
 			iiospec->args[0]);
 		return -EINVAL;
 	}
@@ -149,32 +141,33 @@ static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
 	return iiospec->args[0];
 }
 
-static int __of_iio_channel_get(struct iio_channel *channel,
-				struct device_node *np, int index)
+static int __fwnode_iio_channel_get(struct iio_channel *channel,
+				    struct fwnode_handle *fwnode, int index)
 {
+	struct fwnode_reference_args iiospec;
 	struct device *idev;
 	struct iio_dev *indio_dev;
 	int err;
-	struct of_phandle_args iiospec;
 
-	err = of_parse_phandle_with_args(np, "io-channels",
-					 "#io-channel-cells",
-					 index, &iiospec);
+	err = fwnode_property_get_reference_args(fwnode, "io-channels",
+						 "#io-channel-cells", 0,
+						 index, &iiospec);
 	if (err)
 		return err;
 
-	idev = bus_find_device(&iio_bus_type, NULL, iiospec.np,
-			       iio_dev_node_match);
-	of_node_put(iiospec.np);
-	if (idev == NULL)
+	idev = bus_find_device_by_fwnode(&iio_bus_type, iiospec.fwnode);
+	if (!idev) {
+		fwnode_handle_put(iiospec.fwnode);
 		return -EPROBE_DEFER;
+	}
 
 	indio_dev = dev_to_iio_dev(idev);
 	channel->indio_dev = indio_dev;
-	if (indio_dev->info->of_xlate)
-		index = indio_dev->info->of_xlate(indio_dev, &iiospec);
+	if (indio_dev->info->fwnode_xlate)
+		index = indio_dev->info->fwnode_xlate(indio_dev, &iiospec);
 	else
-		index = __of_iio_simple_xlate(indio_dev, &iiospec);
+		index = __fwnode_iio_simple_xlate(indio_dev, &iiospec);
+	fwnode_handle_put(iiospec.fwnode);
 	if (index < 0)
 		goto err_put;
 	channel->channel = &indio_dev->channels[index];
@@ -186,7 +179,8 @@ err_put:
 	return index;
 }
 
-static struct iio_channel *of_iio_channel_get(struct device_node *np, int index)
+static struct iio_channel *fwnode_iio_channel_get(struct fwnode_handle *fwnode,
+						  int index)
 {
 	struct iio_channel *channel;
 	int err;
@@ -195,10 +189,10 @@ static struct iio_channel *of_iio_channel_get(struct device_node *np, int index)
 		return ERR_PTR(-EINVAL);
 
 	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
-	if (channel == NULL)
+	if (!channel)
 		return ERR_PTR(-ENOMEM);
 
-	err = __of_iio_channel_get(channel, np, index);
+	err = __fwnode_iio_channel_get(channel, fwnode, index);
 	if (err)
 		goto err_free_channel;
 
@@ -209,74 +203,116 @@ err_free_channel:
 	return ERR_PTR(err);
 }
 
-struct iio_channel *of_iio_channel_get_by_name(struct device_node *np,
-					       const char *name)
+static struct iio_channel *
+__fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, const char *name)
 {
-	struct iio_channel *chan = NULL;
-
-	/* Walk up the tree of devices looking for a matching iio channel */
-	while (np) {
-		int index = 0;
-
+	struct iio_channel *chan;
+	int index = 0;
+
+	/*
+	 * For named iio channels, first look up the name in the
+	 * "io-channel-names" property.  If it cannot be found, the
+	 * index will be an error code, and fwnode_iio_channel_get()
+	 * will fail.
+	 */
+	if (name)
+		index = fwnode_property_match_string(fwnode, "io-channel-names",
+						     name);
+
+	chan = fwnode_iio_channel_get(fwnode, index);
+	if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
+		return chan;
+	if (name) {
+		if (index >= 0) {
+			pr_err("ERROR: could not get IIO channel %pfw:%s(%i)\n",
+			       fwnode, name, index);
+			/*
+			 * In this case, we found 'name' in 'io-channel-names'
+			 * but somehow we still fail so that we should not proceed
+			 * with any other lookup. Hence, explicitly return -EINVAL
+			 * (maybe not the better error code) so that the caller
+			 * won't do a system lookup.
+			 */
+			return ERR_PTR(-EINVAL);
+		}
 		/*
-		 * For named iio channels, first look up the name in the
-		 * "io-channel-names" property.  If it cannot be found, the
-		 * index will be an error code, and of_iio_channel_get()
-		 * will fail.
+		 * If index < 0, then fwnode_property_get_reference_args() fails
+		 * with -EINVAL or -ENOENT (ACPI case) which is expected. We
+		 * should not proceed if we get any other error.
 		 */
-		if (name)
-			index = of_property_match_string(np, "io-channel-names",
-							 name);
-		chan = of_iio_channel_get(np, index);
-		if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
-			break;
-		else if (name && index >= 0) {
-			pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n",
-				np, name ? name : "", index);
-			return NULL;
-		}
-
+		if (PTR_ERR(chan) != -EINVAL && PTR_ERR(chan) != -ENOENT)
+			return chan;
+	} else if (PTR_ERR(chan) != -ENOENT) {
 		/*
-		 * No matching IIO channel found on this node.
-		 * If the parent node has a "io-channel-ranges" property,
-		 * then we can try one of its channels.
+		 * if !name, then we should only proceed the lookup if
+		 * fwnode_property_get_reference_args() returns -ENOENT.
 		 */
-		np = np->parent;
-		if (np && !of_get_property(np, "io-channel-ranges", NULL))
-			return NULL;
+		return chan;
 	}
 
-	return chan;
+	/* so we continue the lookup */
+	return ERR_PTR(-ENODEV);
 }
-EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name);
 
-static struct iio_channel *of_iio_channel_get_all(struct device *dev)
+struct iio_channel *fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode,
+						   const char *name)
 {
+	struct fwnode_handle *parent;
+	struct iio_channel *chan;
+
+	/* Walk up the tree of devices looking for a matching iio channel */
+	chan = __fwnode_iio_channel_get_by_name(fwnode, name);
+	if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV)
+		return chan;
+
+	/*
+	 * No matching IIO channel found on this node.
+	 * If the parent node has a "io-channel-ranges" property,
+	 * then we can try one of its channels.
+	 */
+	fwnode_for_each_parent_node(fwnode, parent) {
+		if (!fwnode_property_present(parent, "io-channel-ranges")) {
+			fwnode_handle_put(parent);
+			return ERR_PTR(-ENODEV);
+		}
+
+		chan = __fwnode_iio_channel_get_by_name(fwnode, name);
+		if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) {
+			fwnode_handle_put(parent);
+ 			return chan;
+		}
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(fwnode_iio_channel_get_by_name);
+
+static struct iio_channel *fwnode_iio_channel_get_all(struct device *dev)
+{
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
 	struct iio_channel *chans;
 	int i, mapind, nummaps = 0;
 	int ret;
 
 	do {
-		ret = of_parse_phandle_with_args(dev->of_node,
-						 "io-channels",
-						 "#io-channel-cells",
-						 nummaps, NULL);
+		ret = fwnode_property_get_reference_args(fwnode, "io-channels",
+							 "#io-channel-cells", 0,
+							 nummaps, NULL);
 		if (ret < 0)
 			break;
 	} while (++nummaps);
 
-	if (nummaps == 0)	/* no error, return NULL to search map table */
-		return NULL;
+	if (nummaps == 0)
+		return ERR_PTR(-ENODEV);
 
 	/* NULL terminated array to save passing size */
 	chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL);
-	if (chans == NULL)
+	if (!chans)
 		return ERR_PTR(-ENOMEM);
 
-	/* Search for OF matches */
+	/* Search for FW matches */
 	for (mapind = 0; mapind < nummaps; mapind++) {
-		ret = __of_iio_channel_get(&chans[mapind], dev->of_node,
-					   mapind);
+		ret = __fwnode_iio_channel_get(&chans[mapind], fwnode, mapind);
 		if (ret)
 			goto error_free_chans;
 	}
@@ -289,15 +325,6 @@ error_free_chans:
 	return ERR_PTR(ret);
 }
 
-#else /* CONFIG_OF */
-
-static inline struct iio_channel *of_iio_channel_get_all(struct device *dev)
-{
-	return NULL;
-}
-
-#endif /* CONFIG_OF */
-
 static struct iio_channel *iio_channel_get_sys(const char *name,
 					       const char *channel_name)
 {
@@ -305,7 +332,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name,
 	struct iio_channel *channel;
 	int err;
 
-	if (name == NULL && channel_name == NULL)
+	if (!(name || channel_name))
 		return ERR_PTR(-ENODEV);
 
 	/* first find matching entry the channel map */
@@ -320,11 +347,11 @@ static struct iio_channel *iio_channel_get_sys(const char *name,
 		break;
 	}
 	mutex_unlock(&iio_map_list_lock);
-	if (c == NULL)
+	if (!c)
 		return ERR_PTR(-ENODEV);
 
 	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
-	if (channel == NULL) {
+	if (!channel) {
 		err = -ENOMEM;
 		goto error_no_mem;
 	}
@@ -336,7 +363,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name,
 			iio_chan_spec_from_name(channel->indio_dev,
 						c->map->adc_channel_label);
 
-		if (channel->channel == NULL) {
+		if (!channel->channel) {
 			err = -EINVAL;
 			goto error_no_chan;
 		}
@@ -358,9 +385,9 @@ struct iio_channel *iio_channel_get(struct device *dev,
 	struct iio_channel *channel;
 
 	if (dev) {
-		channel = of_iio_channel_get_by_name(dev->of_node,
-						     channel_name);
-		if (channel != NULL)
+		channel = fwnode_iio_channel_get_by_name(dev_fwnode(dev),
+							 channel_name);
+		if (!IS_ERR(channel) || PTR_ERR(channel) != -ENODEV)
 			return channel;
 	}
 
@@ -400,14 +427,14 @@ struct iio_channel *devm_iio_channel_get(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_iio_channel_get);
 
-struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev,
-						    struct device_node *np,
-						    const char *channel_name)
+struct iio_channel *devm_fwnode_iio_channel_get_by_name(struct device *dev,
+							struct fwnode_handle *fwnode,
+							const char *channel_name)
 {
 	struct iio_channel *channel;
 	int ret;
 
-	channel = of_iio_channel_get_by_name(np, channel_name);
+	channel = fwnode_iio_channel_get_by_name(fwnode, channel_name);
 	if (IS_ERR(channel))
 		return channel;
 
@@ -417,7 +444,7 @@ struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev,
 
 	return channel;
 }
-EXPORT_SYMBOL_GPL(devm_of_iio_channel_get_by_name);
+EXPORT_SYMBOL_GPL(devm_fwnode_iio_channel_get_by_name);
 
 struct iio_channel *iio_channel_get_all(struct device *dev)
 {
@@ -428,11 +455,15 @@ struct iio_channel *iio_channel_get_all(struct device *dev)
 	int mapind = 0;
 	int i, ret;
 
-	if (dev == NULL)
+	if (!dev)
 		return ERR_PTR(-EINVAL);
 
-	chans = of_iio_channel_get_all(dev);
-	if (chans)
+	chans = fwnode_iio_channel_get_all(dev);
+	/*
+	 * We only want to carry on if the error is -ENODEV.  Anything else
+	 * should be reported up the stack.
+	 */
+	if (!IS_ERR(chans) || PTR_ERR(chans) != -ENODEV)
 		return chans;
 
 	name = dev_name(dev);
@@ -452,7 +483,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev)
 
 	/* NULL terminated array to save passing size */
 	chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL);
-	if (chans == NULL) {
+	if (!chans) {
 		ret = -ENOMEM;
 		goto error_ret;
 	}
@@ -466,7 +497,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev)
 		chans[mapind].channel =
 			iio_chan_spec_from_name(chans[mapind].indio_dev,
 						c->map->adc_channel_label);
-		if (chans[mapind].channel == NULL) {
+		if (!chans[mapind].channel) {
 			ret = -EINVAL;
 			goto error_free_chans;
 		}
@@ -528,14 +559,14 @@ struct iio_channel *devm_iio_channel_get_all(struct device *dev)
 EXPORT_SYMBOL_GPL(devm_iio_channel_get_all);
 
 static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
-	enum iio_chan_info_enum info)
+			    enum iio_chan_info_enum info)
 {
 	int unused;
 	int vals[INDIO_MAX_RAW_ELEMENTS];
 	int ret;
 	int val_len = 2;
 
-	if (val2 == NULL)
+	if (!val2)
 		val2 = &unused;
 
 	if (!iio_channel_has_info(chan->channel, info))
@@ -547,9 +578,10 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
 					vals, &val_len, info);
 		*val = vals[0];
 		*val2 = vals[1];
-	} else
+	} else {
 		ret = chan->indio_dev->info->read_raw(chan->indio_dev,
 					chan->channel, val, val2, info);
+	}
 
 	return ret;
 }
@@ -560,7 +592,7 @@ int iio_read_channel_raw(struct iio_channel *chan, int *val)
 	int ret;
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
-	if (chan->indio_dev->info == NULL) {
+	if (!chan->indio_dev->info) {
 		ret = -ENODEV;
 		goto err_unlock;
 	}
@@ -579,7 +611,7 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val)
 	int ret;
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
-	if (chan->indio_dev->info == NULL) {
+	if (!chan->indio_dev->info) {
 		ret = -ENODEV;
 		goto err_unlock;
 	}
@@ -593,7 +625,8 @@ err_unlock:
 EXPORT_SYMBOL_GPL(iio_read_channel_average_raw);
 
 static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
-	int raw, int *processed, unsigned int scale)
+						 int raw, int *processed,
+						 unsigned int scale)
 {
 	int scale_type, scale_val, scale_val2;
 	int offset_type, offset_val, offset_val2;
@@ -626,7 +659,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 	}
 
 	scale_type = iio_channel_read(chan, &scale_val, &scale_val2,
-					IIO_CHAN_INFO_SCALE);
+				      IIO_CHAN_INFO_SCALE);
 	if (scale_type < 0) {
 		/*
 		 * If no channel scaling is available apply consumer scale to
@@ -671,19 +704,19 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 }
 
 int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
-	int *processed, unsigned int scale)
+				 int *processed, unsigned int scale)
 {
 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(chan->indio_dev);
 	int ret;
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
-	if (chan->indio_dev->info == NULL) {
+	if (!chan->indio_dev->info) {
 		ret = -ENODEV;
 		goto err_unlock;
 	}
 
 	ret = iio_convert_raw_to_processed_unlocked(chan, raw, processed,
-							scale);
+						    scale);
 err_unlock:
 	mutex_unlock(&iio_dev_opaque->info_exist_lock);
 
@@ -698,7 +731,7 @@ int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2,
 	int ret;
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
-	if (chan->indio_dev->info == NULL) {
+	if (!chan->indio_dev->info) {
 		ret = -ENODEV;
 		goto err_unlock;
 	}
@@ -724,7 +757,7 @@ int iio_read_channel_processed_scale(struct iio_channel *chan, int *val,
 	int ret;
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
-	if (chan->indio_dev->info == NULL) {
+	if (!chan->indio_dev->info) {
 		ret = -ENODEV;
 		goto err_unlock;
 	}
@@ -802,7 +835,7 @@ int iio_read_avail_channel_raw(struct iio_channel *chan,
 	int type;
 
 	ret = iio_read_avail_channel_attribute(chan, vals, &type, length,
-					 IIO_CHAN_INFO_RAW);
+					       IIO_CHAN_INFO_RAW);
 
 	if (ret >= 0 && type != IIO_VAL_INT)
 		/* raw values are assumed to be IIO_VAL_INT */
@@ -886,7 +919,7 @@ int iio_get_channel_type(struct iio_channel *chan, enum iio_chan_type *type)
 	/* Need to verify underlying driver has not gone away */
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
-	if (chan->indio_dev->info == NULL) {
+	if (!chan->indio_dev->info) {
 		ret = -ENODEV;
 		goto err_unlock;
 	}
@@ -913,7 +946,7 @@ int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2,
 	int ret;
 
 	mutex_lock(&iio_dev_opaque->info_exist_lock);
-	if (chan->indio_dev->info == NULL) {
+	if (!chan->indio_dev->info) {
 		ret = -ENODEV;
 		goto err_unlock;
 	}
@@ -947,9 +980,8 @@ unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan)
 }
 EXPORT_SYMBOL_GPL(iio_get_channel_ext_info_count);
 
-static const struct iio_chan_spec_ext_info *iio_lookup_ext_info(
-						const struct iio_channel *chan,
-						const char *attr)
+static const struct iio_chan_spec_ext_info *
+iio_lookup_ext_info(const struct iio_channel *chan, const char *attr)
 {
 	const struct iio_chan_spec_ext_info *ext_info;
 
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 8537e88f02e3..7cf6e8490123 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -331,6 +331,17 @@ config LTR501
 	  This driver can also be built as a module.  If so, the module
 	  will be called ltr501.
 
+config LTRF216A
+	tristate "Liteon LTRF216A Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say Y or M here, you get support for Liteon LTRF216A
+	  Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  ltrf216a.
+
 config LV0104CS
 	tristate "LV0104CS Ambient Light Sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index d10912faf964..6f23817fae6f 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_ISL29125)		+= isl29125.o
 obj-$(CONFIG_JSA1212)		+= jsa1212.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
+obj-$(CONFIG_LTRF216A)		+= ltrf216a.o
 obj-$(CONFIG_LV0104CS)		+= lv0104cs.o
 obj-$(CONFIG_MAX44000)		+= max44000.o
 obj-$(CONFIG_MAX44009)		+= max44009.o
diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c
new file mode 100644
index 000000000000..4b8ef36b6912
--- /dev/null
+++ b/drivers/iio/light/ltrf216a.c
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LTRF216A Ambient Light Sensor
+ *
+ * Copyright (C) 2022 Collabora, Ltd.
+ * Author: Shreeya Patel <shreeya.patel@collabora.com>
+ *
+ * Copyright (C) 2021 Lite-On Technology Corp (Singapore)
+ * Author: Shi Zhigang <Zhigang.Shi@liteon.com>
+ *
+ * IIO driver for LTRF216A (7-bit I2C slave address 0x53).
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+
+#include <asm/unaligned.h>
+
+#define LTRF216A_ALS_RESET_MASK		BIT(4)
+#define LTRF216A_ALS_DATA_STATUS	BIT(3)
+#define LTRF216A_ALS_ENABLE_MASK	BIT(1)
+#define LTRF216A_MAIN_CTRL		0x00
+#define LTRF216A_ALS_MEAS_RES		0x04
+#define LTRF216A_ALS_GAIN		0x05
+#define LTRF216A_PART_ID		0x06
+#define LTRF216A_MAIN_STATUS		0x07
+#define LTRF216A_ALS_CLEAR_DATA_0	0x0a
+#define LTRF216A_ALS_CLEAR_DATA_1	0x0b
+#define LTRF216A_ALS_CLEAR_DATA_2	0x0c
+#define LTRF216A_ALS_DATA_0		0x0d
+#define LTRF216A_ALS_DATA_1		0x0e
+#define LTRF216A_ALS_DATA_2		0x0f
+#define LTRF216A_INT_CFG		0x19
+#define LTRF216A_INT_PST		0x1a
+#define LTRF216A_ALS_THRES_UP_0		0x21
+#define LTRF216A_ALS_THRES_UP_1		0x22
+#define LTRF216A_ALS_THRES_UP_2		0x23
+#define LTRF216A_ALS_THRES_LOW_0	0x24
+#define LTRF216A_ALS_THRES_LOW_1	0x25
+#define LTRF216A_ALS_THRES_LOW_2	0x26
+#define LTRF216A_ALS_READ_DATA_DELAY_US	20000
+
+static const int ltrf216a_int_time_available[][2] = {
+	{ 0, 400000 },
+	{ 0, 200000 },
+	{ 0, 100000 },
+	{ 0,  50000 },
+	{ 0,  25000 },
+};
+
+static const int ltrf216a_int_time_reg[][2] = {
+	{ 400, 0x03 },
+	{ 200, 0x13 },
+	{ 100, 0x22 },
+	{  50, 0x31 },
+	{  25, 0x40 },
+};
+
+/*
+ * Window Factor is needed when the device is under Window glass
+ * with coated tinted ink. This is to compensate for the light loss
+ * due to the lower transmission rate of the window glass and helps
+ * in calculating lux.
+ */
+#define LTRF216A_WIN_FAC	1
+
+struct ltrf216a_data {
+	struct regmap *regmap;
+	struct i2c_client *client;
+	u32 int_time;
+	u16 int_time_fac;
+	u8 als_gain_fac;
+	/*
+	 * Protects regmap accesses and makes sure integration time
+	 * remains constant during the measurement of lux.
+	 */
+	struct mutex lock;
+};
+
+static const struct iio_chan_spec ltrf216a_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_separate_available =
+			BIT(IIO_CHAN_INFO_INT_TIME),
+	},
+};
+
+static void ltrf216a_reset(struct iio_dev *indio_dev)
+{
+	struct ltrf216a_data *data = iio_priv(indio_dev);
+
+	/* reset sensor, chip fails to respond to this, so ignore any errors */
+	regmap_write(data->regmap, LTRF216A_MAIN_CTRL, LTRF216A_ALS_RESET_MASK);
+
+	/* reset time */
+	usleep_range(1000, 2000);
+}
+
+static int ltrf216a_enable(struct iio_dev *indio_dev)
+{
+	struct ltrf216a_data *data = iio_priv(indio_dev);
+	struct device *dev = &data->client->dev;
+	int ret;
+
+	/* enable sensor */
+	ret = regmap_set_bits(data->regmap,
+			      LTRF216A_MAIN_CTRL, LTRF216A_ALS_ENABLE_MASK);
+	if (ret) {
+		dev_err(dev, "failed to enable sensor: %d\n", ret);
+		return ret;
+	}
+
+	/* sleep for one integration cycle after enabling the device */
+	msleep(ltrf216a_int_time_reg[0][0]);
+
+	return 0;
+}
+
+static int ltrf216a_disable(struct iio_dev *indio_dev)
+{
+	struct ltrf216a_data *data = iio_priv(indio_dev);
+	struct device *dev = &data->client->dev;
+	int ret;
+
+	ret = regmap_write(data->regmap, LTRF216A_MAIN_CTRL, 0);
+	if (ret)
+		dev_err(dev, "failed to disable sensor: %d\n", ret);
+
+	return ret;
+}
+
+static void ltrf216a_cleanup(void *data)
+{
+	struct iio_dev *indio_dev = data;
+
+	ltrf216a_disable(indio_dev);
+}
+
+static int ltrf216a_set_int_time(struct ltrf216a_data *data, int itime)
+{
+	struct device *dev = &data->client->dev;
+	unsigned int i;
+	u8 reg_val;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(ltrf216a_int_time_available); i++) {
+		if (ltrf216a_int_time_available[i][1] == itime)
+			break;
+	}
+	if (i == ARRAY_SIZE(ltrf216a_int_time_available))
+		return -EINVAL;
+
+	reg_val = ltrf216a_int_time_reg[i][1];
+
+	ret = regmap_write(data->regmap, LTRF216A_ALS_MEAS_RES, reg_val);
+	if (ret) {
+		dev_err(dev, "failed to set integration time: %d\n", ret);
+		return ret;
+	}
+
+	data->int_time_fac = ltrf216a_int_time_reg[i][0];
+	data->int_time = itime;
+
+	return 0;
+}
+
+static int ltrf216a_get_int_time(struct ltrf216a_data *data,
+				 int *val, int *val2)
+{
+	*val = 0;
+	*val2 = data->int_time;
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ltrf216a_set_power_state(struct ltrf216a_data *data, bool on)
+{
+	struct device *dev = &data->client->dev;
+	int ret = 0;
+
+	if (on) {
+		ret = pm_runtime_resume_and_get(dev);
+		if (ret) {
+			dev_err(dev, "failed to resume runtime PM: %d\n", ret);
+			return ret;
+		}
+	} else {
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
+	}
+
+	return ret;
+}
+
+static int ltrf216a_read_data(struct ltrf216a_data *data, u8 addr)
+{
+	struct device *dev = &data->client->dev;
+	int ret, val;
+	u8 buf[3];
+
+	ret = regmap_read_poll_timeout(data->regmap, LTRF216A_MAIN_STATUS,
+				       val, val & LTRF216A_ALS_DATA_STATUS,
+				       LTRF216A_ALS_READ_DATA_DELAY_US,
+				       LTRF216A_ALS_READ_DATA_DELAY_US * 50);
+	if (ret) {
+		dev_err(dev, "failed to wait for measurement data: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_bulk_read(data->regmap, addr, buf, sizeof(buf));
+	if (ret) {
+		dev_err(dev, "failed to read measurement data: %d\n", ret);
+		return ret;
+	}
+
+	return get_unaligned_le24(&buf[0]);
+}
+
+static int ltrf216a_get_lux(struct ltrf216a_data *data)
+{
+	int ret, greendata;
+	u64 lux, div;
+
+	ret = ltrf216a_set_power_state(data, true);
+	if (ret)
+		return ret;
+
+	greendata = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0);
+	if (greendata < 0)
+		return greendata;
+
+	ltrf216a_set_power_state(data, false);
+
+	lux = greendata * 45 * LTRF216A_WIN_FAC * 100;
+	div = data->als_gain_fac * data->int_time_fac * 100;
+
+	return div_u64(lux, div);
+}
+
+static int ltrf216a_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	struct ltrf216a_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ltrf216a_set_power_state(data, true);
+		if (ret)
+			return ret;
+		mutex_lock(&data->lock);
+		ret = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0);
+		mutex_unlock(&data->lock);
+		ltrf216a_set_power_state(data, false);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_PROCESSED:
+		mutex_lock(&data->lock);
+		ret = ltrf216a_get_lux(data);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		mutex_lock(&data->lock);
+		ret = ltrf216a_get_int_time(data, val, val2);
+		mutex_unlock(&data->lock);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltrf216a_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan, int val,
+			      int val2, long mask)
+{
+	struct ltrf216a_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val != 0)
+			return -EINVAL;
+		mutex_lock(&data->lock);
+		ret = ltrf216a_set_int_time(data, val2);
+		mutex_unlock(&data->lock);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltrf216a_read_available(struct iio_dev *indio_dev,
+				   struct iio_chan_spec const *chan,
+				   const int **vals, int *type, int *length,
+				   long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(ltrf216a_int_time_available) * 2;
+		*vals = (const int *)ltrf216a_int_time_available;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ltrf216a_info = {
+	.read_raw = ltrf216a_read_raw,
+	.write_raw = ltrf216a_write_raw,
+	.read_avail = ltrf216a_read_available,
+};
+
+static bool ltrf216a_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTRF216A_MAIN_CTRL:
+	case LTRF216A_ALS_MEAS_RES:
+	case LTRF216A_ALS_GAIN:
+	case LTRF216A_PART_ID:
+	case LTRF216A_MAIN_STATUS:
+	case LTRF216A_ALS_CLEAR_DATA_0:
+	case LTRF216A_ALS_CLEAR_DATA_1:
+	case LTRF216A_ALS_CLEAR_DATA_2:
+	case LTRF216A_ALS_DATA_0:
+	case LTRF216A_ALS_DATA_1:
+	case LTRF216A_ALS_DATA_2:
+	case LTRF216A_INT_CFG:
+	case LTRF216A_INT_PST:
+	case LTRF216A_ALS_THRES_UP_0:
+	case LTRF216A_ALS_THRES_UP_1:
+	case LTRF216A_ALS_THRES_UP_2:
+	case LTRF216A_ALS_THRES_LOW_0:
+	case LTRF216A_ALS_THRES_LOW_1:
+	case LTRF216A_ALS_THRES_LOW_2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool ltrf216a_writable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTRF216A_MAIN_CTRL:
+	case LTRF216A_ALS_MEAS_RES:
+	case LTRF216A_ALS_GAIN:
+	case LTRF216A_INT_CFG:
+	case LTRF216A_INT_PST:
+	case LTRF216A_ALS_THRES_UP_0:
+	case LTRF216A_ALS_THRES_UP_1:
+	case LTRF216A_ALS_THRES_UP_2:
+	case LTRF216A_ALS_THRES_LOW_0:
+	case LTRF216A_ALS_THRES_LOW_1:
+	case LTRF216A_ALS_THRES_LOW_2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool ltrf216a_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTRF216A_MAIN_STATUS:
+	case LTRF216A_ALS_CLEAR_DATA_0:
+	case LTRF216A_ALS_CLEAR_DATA_1:
+	case LTRF216A_ALS_CLEAR_DATA_2:
+	case LTRF216A_ALS_DATA_0:
+	case LTRF216A_ALS_DATA_1:
+	case LTRF216A_ALS_DATA_2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool ltrf216a_precious_reg(struct device *dev, unsigned int reg)
+{
+	return reg == LTRF216A_MAIN_STATUS;
+}
+
+static const struct regmap_config ltrf216a_regmap_config = {
+	.name = "ltrf216a",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = LTRF216A_ALS_THRES_LOW_2,
+	.readable_reg = ltrf216a_readable_reg,
+	.writeable_reg = ltrf216a_writable_reg,
+	.volatile_reg = ltrf216a_volatile_reg,
+	.precious_reg = ltrf216a_precious_reg,
+	.disable_locking = true,
+};
+
+static int ltrf216a_probe(struct i2c_client *client)
+{
+	struct ltrf216a_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+
+	data->regmap = devm_regmap_init_i2c(client, &ltrf216a_regmap_config);
+	if (IS_ERR(data->regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(data->regmap),
+				     "regmap initialization failed\n");
+
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	mutex_init(&data->lock);
+
+	indio_dev->info = &ltrf216a_info;
+	indio_dev->name = "ltrf216a";
+	indio_dev->channels = ltrf216a_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ltrf216a_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		return ret;
+
+	/* reset sensor, chip fails to respond to this, so ignore any errors */
+	ltrf216a_reset(indio_dev);
+
+	ret = regmap_reinit_cache(data->regmap, &ltrf216a_regmap_config);
+	if (ret)
+		return dev_err_probe(&client->dev, ret,
+				     "failed to reinit regmap cache\n");
+
+	ret = ltrf216a_enable(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&client->dev, ltrf216a_cleanup,
+				       indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_pm_runtime_enable(&client->dev);
+	if (ret)
+		return dev_err_probe(&client->dev, ret,
+				     "failed to enable runtime PM\n");
+
+	pm_runtime_set_autosuspend_delay(&client->dev, 1000);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	data->int_time = 100000;
+	data->int_time_fac = 100;
+	data->als_gain_fac = 3;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int ltrf216a_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct ltrf216a_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = ltrf216a_disable(indio_dev);
+	if (ret)
+		return ret;
+
+	regcache_cache_only(data->regmap, true);
+
+	return 0;
+}
+
+static int ltrf216a_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct ltrf216a_data *data = iio_priv(indio_dev);
+	int ret;
+
+	regcache_cache_only(data->regmap, false);
+	regcache_mark_dirty(data->regmap);
+	ret = regcache_sync(data->regmap);
+	if (ret)
+		goto cache_only;
+
+	ret = ltrf216a_enable(indio_dev);
+	if (ret)
+		goto cache_only;
+
+	return 0;
+
+cache_only:
+	regcache_cache_only(data->regmap, true);
+
+	return ret;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(ltrf216a_pm_ops, ltrf216a_runtime_suspend,
+				 ltrf216a_runtime_resume, NULL);
+
+static const struct i2c_device_id ltrf216a_id[] = {
+	{ "ltrf216a" },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ltrf216a_id);
+
+static const struct of_device_id ltrf216a_of_match[] = {
+	{ .compatible = "liteon,ltrf216a" },
+	{ .compatible = "ltr,ltrf216a" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ltrf216a_of_match);
+
+static struct i2c_driver ltrf216a_driver = {
+	.driver = {
+		.name = "ltrf216a",
+		.pm = pm_ptr(&ltrf216a_pm_ops),
+		.of_match_table = ltrf216a_of_match,
+	},
+	.probe_new = ltrf216a_probe,
+	.id_table = ltrf216a_id,
+};
+module_i2c_driver(ltrf216a_driver);
+
+MODULE_AUTHOR("Shreeya Patel <shreeya.patel@collabora.com>");
+MODULE_AUTHOR("Shi Zhigang <Zhigang.Shi@liteon.com>");
+MODULE_DESCRIPTION("LTRF216A ambient light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c
index 3d4cc1180b6a..c737d3e193ae 100644
--- a/drivers/iio/light/st_uvis25_core.c
+++ b/drivers/iio/light/st_uvis25_core.c
@@ -325,7 +325,7 @@ int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap)
 }
 EXPORT_SYMBOL_NS(st_uvis25_probe, IIO_UVIS25);
 
-static int __maybe_unused st_uvis25_suspend(struct device *dev)
+static int st_uvis25_suspend(struct device *dev)
 {
 	struct iio_dev *iio_dev = dev_get_drvdata(dev);
 	struct st_uvis25_hw *hw = iio_priv(iio_dev);
@@ -334,7 +334,7 @@ static int __maybe_unused st_uvis25_suspend(struct device *dev)
 				  ST_UVIS25_REG_ODR_MASK, 0);
 }
 
-static int __maybe_unused st_uvis25_resume(struct device *dev)
+static int st_uvis25_resume(struct device *dev)
 {
 	struct iio_dev *iio_dev = dev_get_drvdata(dev);
 	struct st_uvis25_hw *hw = iio_priv(iio_dev);
@@ -346,10 +346,7 @@ static int __maybe_unused st_uvis25_resume(struct device *dev)
 	return 0;
 }
 
-const struct dev_pm_ops st_uvis25_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume)
-};
-EXPORT_SYMBOL_NS(st_uvis25_pm_ops, IIO_UVIS25);
+EXPORT_NS_SIMPLE_DEV_PM_OPS(st_uvis25_pm_ops, st_uvis25_suspend, st_uvis25_resume, IIO_UVIS25);
 
 MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>");
 MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver");
diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c
index b06d09af28a3..c982b0b255cf 100644
--- a/drivers/iio/light/st_uvis25_i2c.c
+++ b/drivers/iio/light/st_uvis25_i2c.c
@@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(i2c, st_uvis25_i2c_id_table);
 static struct i2c_driver st_uvis25_driver = {
 	.driver = {
 		.name = "st_uvis25_i2c",
-		.pm = &st_uvis25_pm_ops,
+		.pm = pm_sleep_ptr(&st_uvis25_pm_ops),
 		.of_match_table = st_uvis25_i2c_of_match,
 	},
 	.probe = st_uvis25_i2c_probe,
diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c
index 3a4dc6d7180c..86a232320d7d 100644
--- a/drivers/iio/light/st_uvis25_spi.c
+++ b/drivers/iio/light/st_uvis25_spi.c
@@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(spi, st_uvis25_spi_id_table);
 static struct spi_driver st_uvis25_driver = {
 	.driver = {
 		.name = "st_uvis25_spi",
-		.pm = &st_uvis25_pm_ops,
+		.pm = pm_sleep_ptr(&st_uvis25_pm_ops),
 		.of_match_table = st_uvis25_spi_of_match,
 	},
 	.probe = st_uvis25_spi_probe,
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 07eb619bcfe8..b91fc5e6a26e 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -216,8 +216,8 @@ config YAMAHA_YAS530
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to add support for the Yamaha YAS530 series of
-	  3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are
-	  fully supported.
+	  3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
+	  supported.
 
 	  This driver can also be compiled as a module.
 	  To compile this driver as a module, choose M here: the module
diff --git a/drivers/iio/magnetometer/hmc5843.h b/drivers/iio/magnetometer/hmc5843.h
index 9120c8bbf3dd..60fbb5431c88 100644
--- a/drivers/iio/magnetometer/hmc5843.h
+++ b/drivers/iio/magnetometer/hmc5843.h
@@ -52,16 +52,5 @@ int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
 			 enum hmc5843_ids id, const char *name);
 void hmc5843_common_remove(struct device *dev);
 
-int hmc5843_common_suspend(struct device *dev);
-int hmc5843_common_resume(struct device *dev);
-
-#ifdef CONFIG_PM_SLEEP
-static __maybe_unused SIMPLE_DEV_PM_OPS(hmc5843_pm_ops,
-					hmc5843_common_suspend,
-					hmc5843_common_resume);
-#define HMC5843_PM_OPS (&hmc5843_pm_ops)
-#else
-#define HMC5843_PM_OPS NULL
-#endif
-
+extern const struct dev_pm_ops hmc5843_pm_ops;
 #endif /* HMC5843_CORE_H */
diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c
index 4a63b2da9df0..c5521d61da29 100644
--- a/drivers/iio/magnetometer/hmc5843_core.c
+++ b/drivers/iio/magnetometer/hmc5843_core.c
@@ -603,19 +603,19 @@ static const struct iio_info hmc5843_info = {
 
 static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
 
-int hmc5843_common_suspend(struct device *dev)
+static int hmc5843_common_suspend(struct device *dev)
 {
 	return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
 				HMC5843_MODE_SLEEP);
 }
-EXPORT_SYMBOL_NS(hmc5843_common_suspend, IIO_HMC5843);
 
-int hmc5843_common_resume(struct device *dev)
+static int hmc5843_common_resume(struct device *dev)
 {
 	return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
 		HMC5843_MODE_CONVERSION_CONTINUOUS);
 }
-EXPORT_SYMBOL_NS(hmc5843_common_resume, IIO_HMC5843);
+EXPORT_NS_SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_common_suspend,
+			    hmc5843_common_resume, IIO_HMC5843);
 
 int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
 			 enum hmc5843_ids id, const char *name)
diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c
index fe5e8415b2f2..18a13dd51296 100644
--- a/drivers/iio/magnetometer/hmc5843_i2c.c
+++ b/drivers/iio/magnetometer/hmc5843_i2c.c
@@ -91,7 +91,7 @@ MODULE_DEVICE_TABLE(of, hmc5843_of_match);
 static struct i2c_driver hmc5843_driver = {
 	.driver = {
 		.name	= "hmc5843",
-		.pm	= HMC5843_PM_OPS,
+		.pm	= pm_sleep_ptr(&hmc5843_pm_ops),
 		.of_match_table = hmc5843_of_match,
 	},
 	.id_table	= hmc5843_id,
diff --git a/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c
index 8403f09aba39..c42d2e2a6a6c 100644
--- a/drivers/iio/magnetometer/hmc5843_spi.c
+++ b/drivers/iio/magnetometer/hmc5843_spi.c
@@ -86,13 +86,13 @@ static const struct spi_device_id hmc5843_id[] = {
 MODULE_DEVICE_TABLE(spi, hmc5843_id);
 
 static struct spi_driver hmc5843_driver = {
-		.driver = {
-				.name = "hmc5843",
-				.pm = HMC5843_PM_OPS,
-		},
-		.id_table = hmc5843_id,
-		.probe = hmc5843_spi_probe,
-		.remove = hmc5843_spi_remove,
+	.driver = {
+		.name = "hmc5843",
+		.pm = pm_sleep_ptr(&hmc5843_pm_ops),
+	},
+	.id_table = hmc5843_id,
+	.probe = hmc5843_spi_probe,
+	.remove = hmc5843_spi_remove,
 };
 
 module_spi_driver(hmc5843_driver);
diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index c3a10942654e..801c760feb4d 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -10,13 +10,16 @@
  * (YAS534 is a magnetic switch, not handled)
  * YAS535 MS-6C
  * YAS536 MS-3W
- * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Xiaomi)
+ * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Galaxy S7)
  * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN)
  *
  * Code functions found in the MPU3050 YAS530 and YAS532 drivers
  * named "inv_compass" in the Tegra Android kernel tree.
  * Copyright (C) 2012 InvenSense Corporation
  *
+ * Code functions for YAS537 based on Yamaha Android kernel driver.
+ * Copyright (c) 2014 Yamaha Corporation
+ *
  * Author: Linus Walleij <linus.walleij@linaro.org>
  */
 #include <linux/bitfield.h>
@@ -29,9 +32,11 @@
 #include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/random.h>
+#include <linux/units.h>
 
 #include <linux/iio/buffer.h>
 #include <linux/iio/iio.h>
@@ -40,20 +45,39 @@
 
 #include <asm/unaligned.h>
 
-/* This register map covers YAS530 and YAS532 but differs in YAS 537 and YAS539 */
+/* Commonly used registers */
 #define YAS5XX_DEVICE_ID		0x80
-#define YAS5XX_ACTUATE_INIT_COIL	0x81
-#define YAS5XX_MEASURE			0x82
-#define YAS5XX_CONFIG			0x83
-#define YAS5XX_MEASURE_INTERVAL		0x84
-#define YAS5XX_OFFSET_X			0x85 /* [-31 .. 31] */
-#define YAS5XX_OFFSET_Y1		0x86 /* [-31 .. 31] */
-#define YAS5XX_OFFSET_Y2		0x87 /* [-31 .. 31] */
-#define YAS5XX_TEST1			0x88
-#define YAS5XX_TEST2			0x89
-#define YAS5XX_CAL			0x90
 #define YAS5XX_MEASURE_DATA		0xB0
 
+/* These registers are used by YAS530, YAS532 and YAS533 */
+#define YAS530_ACTUATE_INIT_COIL	0x81
+#define YAS530_MEASURE			0x82
+#define YAS530_CONFIG			0x83
+#define YAS530_MEASURE_INTERVAL		0x84
+#define YAS530_OFFSET_X			0x85 /* [-31 .. 31] */
+#define YAS530_OFFSET_Y1		0x86 /* [-31 .. 31] */
+#define YAS530_OFFSET_Y2		0x87 /* [-31 .. 31] */
+#define YAS530_TEST1			0x88
+#define YAS530_TEST2			0x89
+#define YAS530_CAL			0x90
+
+/* Registers used by YAS537 */
+#define YAS537_MEASURE			0x81 /* Originally YAS537_REG_CMDR */
+#define YAS537_CONFIG			0x82 /* Originally YAS537_REG_CONFR */
+#define YAS537_MEASURE_INTERVAL		0x83 /* Originally YAS537_REG_INTRVLR */
+#define YAS537_OFFSET_X			0x84 /* Originally YAS537_REG_OXR */
+#define YAS537_OFFSET_Y1		0x85 /* Originally YAS537_REG_OY1R */
+#define YAS537_OFFSET_Y2		0x86 /* Originally YAS537_REG_OY2R */
+#define YAS537_AVR			0x87
+#define YAS537_HCK			0x88
+#define YAS537_LCK			0x89
+#define YAS537_SRST			0x90
+#define YAS537_ADCCAL			0x91
+#define YAS537_MTC			0x93
+#define YAS537_OC			0x9E
+#define YAS537_TRM			0x9F
+#define YAS537_CAL			0xC0
+
 /* Bits in the YAS5xx config register */
 #define YAS5XX_CONFIG_INTON		BIT(0) /* Interrupt on? */
 #define YAS5XX_CONFIG_INTHACT		BIT(1) /* Interrupt active high? */
@@ -65,6 +89,7 @@
 #define YAS5XX_MEASURE_LDTC		BIT(1)
 #define YAS5XX_MEASURE_FORS		BIT(2)
 #define YAS5XX_MEASURE_DLYMES		BIT(4)
+#define YAS5XX_MEASURE_CONT		BIT(5)
 
 /* Bits in the measure data register */
 #define YAS5XX_MEASURE_DATA_BUSY	BIT(7)
@@ -88,33 +113,101 @@
 #define YAS532_DATA_BITS		13
 #define YAS532_DATA_CENTER		BIT(YAS532_DATA_BITS - 1)
 #define YAS532_DATA_OVERFLOW		(BIT(YAS532_DATA_BITS) - 1)
-#define YAS532_20DEGREES		390 /* Looks like Kelvin */
 
-/* These variant IDs are known from code dumps */
 #define YAS537_DEVICE_ID		0x07 /* YAS537 (MS-3T) */
-#define YAS539_DEVICE_ID		0x08 /* YAS539 (MS-3S) */
+#define YAS537_VERSION_0		0 /* Version naming unknown */
+#define YAS537_VERSION_1		1 /* Version naming unknown */
+#define YAS537_MAG_AVERAGE_32_MASK	GENMASK(6, 4)
+#define YAS537_MEASURE_TIME_WORST_US	1500
+#define YAS537_DEFAULT_SENSOR_DELAY_MS	50
+#define YAS537_MAG_RCOIL_TIME_US	65
+#define YAS537_MTC3_MASK_PREP		GENMASK(7, 0)
+#define YAS537_MTC3_MASK_GET		GENMASK(7, 5)
+#define YAS537_MTC3_ADD_BIT		BIT(4)
+#define YAS537_HCK_MASK_PREP		GENMASK(4, 0)
+#define YAS537_HCK_MASK_GET		GENMASK(7, 4)
+#define YAS537_LCK_MASK_PREP		GENMASK(4, 0)
+#define YAS537_LCK_MASK_GET		GENMASK(3, 0)
+#define YAS537_OC_MASK_GET		GENMASK(5, 0)
 
 /* Turn off device regulators etc after 5 seconds of inactivity */
 #define YAS5XX_AUTOSUSPEND_DELAY_MS	5000
 
+enum chip_ids {
+	yas530,
+	yas532,
+	yas533,
+	yas537,
+};
+
+static const int yas530_volatile_reg[] = {
+	YAS530_ACTUATE_INIT_COIL,
+	YAS530_MEASURE,
+};
+
+static const int yas537_volatile_reg[] = {
+	YAS537_MEASURE,
+};
+
 struct yas5xx_calibration {
 	/* Linearization calibration x, y1, y2 */
 	s32 r[3];
 	u32 f[3];
 	/* Temperature compensation calibration */
-	s32 Cx, Cy1, Cy2;
+	s16 Cx, Cy1, Cy2;
 	/* Misc calibration coefficients */
-	s32 a2, a3, a4, a5, a6, a7, a8, a9, k;
+	s8  a2, a3, a4, a6, a7, a8;
+	s16 a5, a9;
+	u8  k;
 	/* clock divider */
 	u8 dck;
 };
 
+struct yas5xx;
+
+/**
+ * struct yas5xx_chip_info - device-specific data and function pointers
+ * @devid: device ID number
+ * @product_name: product name of the YAS variant
+ * @version_names: version letters or namings
+ * @volatile_reg: device-specific volatile registers
+ * @volatile_reg_qty: quantity of device-specific volatile registers
+ * @scaling_val2: scaling value for IIO_CHAN_INFO_SCALE
+ * @t_ref: number of counts at reference temperature 20 °C
+ * @min_temp_x10: starting point of temperature counting in 1/10:s degrees Celsius
+ * @get_measure: function pointer to get a measurement
+ * @get_calibration_data: function pointer to get calibration data
+ * @dump_calibration: function pointer to dump calibration for debugging
+ * @measure_offsets: function pointer to measure the offsets
+ * @power_on: function pointer to power-on procedure
+ *
+ * The "t_ref" value for YAS532/533 is known from the Android driver.
+ * For YAS530 and YAS537 it was approximately measured.
+ *
+ * The temperatures "min_temp_x10" are derived from the temperature resolutions
+ * given in the data sheets.
+ */
+struct yas5xx_chip_info {
+	unsigned int devid;
+	const char *product_name;
+	const char *version_names[2];
+	const int *volatile_reg;
+	int volatile_reg_qty;
+	u32 scaling_val2;
+	u16 t_ref;
+	s16 min_temp_x10;
+	int (*get_measure)(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo);
+	int (*get_calibration_data)(struct yas5xx *yas5xx);
+	void (*dump_calibration)(struct yas5xx *yas5xx);
+	int (*measure_offsets)(struct yas5xx *yas5xx);
+	int (*power_on)(struct yas5xx *yas5xx);
+};
+
 /**
  * struct yas5xx - state container for the YAS5xx driver
  * @dev: parent device pointer
- * @devid: device ID number
+ * @chip_info: device-specific data and function pointers
  * @version: device version
- * @name: device name
  * @calibration: calibration settings from the OTP storage
  * @hard_offsets: offsets for each axis measured with initcoil actuated
  * @orientation: mounting matrix, flipped axis etc
@@ -128,11 +221,10 @@ struct yas5xx_calibration {
  */
 struct yas5xx {
 	struct device *dev;
-	unsigned int devid;
+	const struct yas5xx_chip_info *chip_info;
 	unsigned int version;
-	char name[16];
 	struct yas5xx_calibration calibration;
-	u8 hard_offsets[3];
+	s8 hard_offsets[3];
 	struct iio_mount_matrix orientation;
 	struct regmap *map;
 	struct regulator_bulk_data regs[2];
@@ -179,23 +271,26 @@ static u16 yas532_extract_axis(u8 *data)
 }
 
 /**
- * yas5xx_measure() - Make a measure from the hardware
+ * yas530_measure() - Make a measure from the hardware
  * @yas5xx: The device state
  * @t: the raw temperature measurement
  * @x: the raw x axis measurement
  * @y1: the y1 axis measurement
  * @y2: the y2 axis measurement
  * @return: 0 on success or error code
+ *
+ * Used by YAS530, YAS532 and YAS533.
  */
-static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
+static int yas530_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
 {
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
 	unsigned int busy;
 	u8 data[8];
 	int ret;
 	u16 val;
 
 	mutex_lock(&yas5xx->lock);
-	ret = regmap_write(yas5xx->map, YAS5XX_MEASURE, YAS5XX_MEASURE_START);
+	ret = regmap_write(yas5xx->map, YAS530_MEASURE, YAS5XX_MEASURE_START);
 	if (ret < 0)
 		goto out_unlock;
 
@@ -219,7 +314,7 @@ static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 
 	mutex_unlock(&yas5xx->lock);
 
-	switch (yas5xx->devid) {
+	switch (ci->devid) {
 	case YAS530_DEVICE_ID:
 		/*
 		 * The t value is 9 bits in big endian format
@@ -261,8 +356,81 @@ out_unlock:
 	return ret;
 }
 
-static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
+/**
+ * yas537_measure() - Make a measure from the hardware
+ * @yas5xx: The device state
+ * @t: the raw temperature measurement
+ * @x: the raw x axis measurement
+ * @y1: the y1 axis measurement
+ * @y2: the y2 axis measurement
+ * @return: 0 on success or error code
+ */
+static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
+{
+	struct yas5xx_calibration *c = &yas5xx->calibration;
+	unsigned int busy;
+	u8 data[8];
+	u16 xy1y2[3];
+	s32 h[3], s[3];
+	int i, ret;
+
+	mutex_lock(&yas5xx->lock);
+
+	/* Contrary to YAS530/532, also a "cont" bit is set, meaning unknown */
+	ret = regmap_write(yas5xx->map, YAS537_MEASURE, YAS5XX_MEASURE_START |
+			   YAS5XX_MEASURE_CONT);
+	if (ret < 0)
+		goto out_unlock;
+
+	/* Use same timeout like YAS530/532 but the bit is in data row 2 */
+	ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA + 2, busy,
+				       !(busy & YAS5XX_MEASURE_DATA_BUSY),
+				       500, 20000);
+	if (ret) {
+		dev_err(yas5xx->dev, "timeout waiting for measurement\n");
+		goto out_unlock;
+	}
+
+	ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA,
+			       data, sizeof(data));
+	if (ret)
+		goto out_unlock;
+
+	mutex_unlock(&yas5xx->lock);
+
+	*t = get_unaligned_be16(&data[0]);
+	xy1y2[0] = FIELD_GET(GENMASK(13, 0), get_unaligned_be16(&data[2]));
+	xy1y2[1] = get_unaligned_be16(&data[4]);
+	xy1y2[2] = get_unaligned_be16(&data[6]);
+
+	/* The second version of YAS537 needs to include calibration coefficients */
+	if (yas5xx->version == YAS537_VERSION_1) {
+		for (i = 0; i < 3; i++)
+			s[i] = xy1y2[i] - BIT(13);
+		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13);
+		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13);
+		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13);
+		for (i = 0; i < 3; i++) {
+			clamp_val(h[i], -BIT(13), BIT(13) - 1);
+			xy1y2[i] = h[i] + BIT(13);
+		}
+	}
+
+	*x = xy1y2[0];
+	*y1 = xy1y2[1];
+	*y2 = xy1y2[2];
+
+	return 0;
+
+out_unlock:
+	mutex_unlock(&yas5xx->lock);
+	return ret;
+}
+
+/* Used by YAS530, YAS532 and YAS533 */
+static s32 yas530_linearize(struct yas5xx *yas5xx, u16 val, int axis)
 {
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
 	struct yas5xx_calibration *c = &yas5xx->calibration;
 	static const s32 yas532ac_coef[] = {
 		YAS532_VERSION_AC_COEF_X,
@@ -272,7 +440,7 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
 	s32 coef;
 
 	/* Select coefficients */
-	switch (yas5xx->devid) {
+	switch (ci->devid) {
 	case YAS530_DEVICE_ID:
 		if (yas5xx->version == YAS530_VERSION_A)
 			coef = YAS530_VERSION_A_COEF;
@@ -302,8 +470,24 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
 		(yas5xx->hard_offsets[axis] - c->r[axis]) * coef;
 }
 
+static s32 yas5xx_calc_temperature(struct yas5xx *yas5xx, u16 t)
+{
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
+	s32 to;
+	u16 t_ref;
+	s16 min_temp_x10;
+	int ref_temp_x10;
+
+	t_ref = ci->t_ref;
+	min_temp_x10 = ci->min_temp_x10;
+	ref_temp_x10 = 200;
+
+	to = (min_temp_x10 + ((ref_temp_x10 - min_temp_x10) * t / t_ref)) * 100;
+	return to;
+}
+
 /**
- * yas5xx_get_measure() - Measure a sample of all axis and process
+ * yas530_get_measure() - Measure a sample of all axis and process
  * @yas5xx: The device state
  * @to: Temperature out
  * @xo: X axis out
@@ -311,36 +495,50 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
  * @zo: Z axis out
  * @return: 0 on success or error code
  *
- * Returned values are in nanotesla according to some code.
+ * Used by YAS530, YAS532 and YAS533.
  */
-static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
+static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
 {
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
 	struct yas5xx_calibration *c = &yas5xx->calibration;
-	u16 t, x, y1, y2;
-	/* These are "signed x, signed y1 etc */
+	u16 t_ref, t_comp, t, x, y1, y2;
+	/* These are signed x, signed y1 etc */
 	s32 sx, sy1, sy2, sy, sz;
 	int ret;
 
 	/* We first get raw data that needs to be translated to [x,y,z] */
-	ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2);
+	ret = yas530_measure(yas5xx, &t, &x, &y1, &y2);
 	if (ret)
 		return ret;
 
 	/* Do some linearization if available */
-	sx = yas5xx_linearize(yas5xx, x, 0);
-	sy1 = yas5xx_linearize(yas5xx, y1, 1);
-	sy2 = yas5xx_linearize(yas5xx, y2, 2);
+	sx = yas530_linearize(yas5xx, x, 0);
+	sy1 = yas530_linearize(yas5xx, y1, 1);
+	sy2 = yas530_linearize(yas5xx, y2, 2);
+
+	/*
+	 * Set the temperature for compensation (unit: counts):
+	 * YAS532/YAS533 version AC uses the temperature deviation as a
+	 * multiplier. YAS530 and YAS532 version AB use solely the t value.
+	 */
+	t_ref = ci->t_ref;
+	if (ci->devid == YAS532_DEVICE_ID &&
+	    yas5xx->version == YAS532_VERSION_AC) {
+		t_comp = t - t_ref;
+	} else {
+		t_comp = t;
+	}
 
 	/*
 	 * Temperature compensation for x, y1, y2 respectively:
 	 *
-	 *          Cx * t
-	 * x' = x - ------
-	 *           100
+	 *          Cx * t_comp
+	 * x' = x - -----------
+	 *              100
 	 */
-	sx = sx - (c->Cx * t) / 100;
-	sy1 = sy1 - (c->Cy1 * t) / 100;
-	sy2 = sy2 - (c->Cy2 * t) / 100;
+	sx = sx - (c->Cx * t_comp) / 100;
+	sy1 = sy1 - (c->Cy1 * t_comp) / 100;
+	sy2 = sy2 - (c->Cy2 * t_comp) / 100;
 
 	/*
 	 * Break y1 and y2 into y and z, y1 and y2 are apparently encoding
@@ -349,11 +547,9 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo,
 	sy = sy1 - sy2;
 	sz = -sy1 - sy2;
 
-	/*
-	 * FIXME: convert to Celsius? Just guessing this is given
-	 * as 1/10:s of degrees so multiply by 100 to get millicentigrades.
-	 */
-	*to = t * 100;
+	/* Calculate temperature readout */
+	*to = yas5xx_calc_temperature(yas5xx, t);
+
 	/*
 	 * Calibrate [x,y,z] with some formulas like this:
 	 *
@@ -376,19 +572,56 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo,
 	return 0;
 }
 
+/**
+ * yas537_get_measure() - Measure a sample of all axis and process
+ * @yas5xx: The device state
+ * @to: Temperature out
+ * @xo: X axis out
+ * @yo: Y axis out
+ * @zo: Z axis out
+ * @return: 0 on success or error code
+ */
+static int yas537_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
+{
+	u16 t, x, y1, y2;
+	int ret;
+
+	/* We first get raw data that needs to be translated to [x,y,z] */
+	ret = yas537_measure(yas5xx, &t, &x, &y1, &y2);
+	if (ret)
+		return ret;
+
+	/* Calculate temperature readout */
+	*to = yas5xx_calc_temperature(yas5xx, t);
+
+	/*
+	 * Unfortunately, no linearization or temperature compensation formulas
+	 * are known for YAS537.
+	 */
+
+	/* Calculate x, y, z from x, y1, y2 */
+	*xo = (x - BIT(13)) * 300;
+	*yo = (y1 - y2) * 1732 / 10;
+	*zo = (-y1 - y2 + BIT(14)) * 300;
+
+	return 0;
+}
+
 static int yas5xx_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
 			   int *val, int *val2,
 			   long mask)
 {
 	struct yas5xx *yas5xx = iio_priv(indio_dev);
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
 	s32 t, x, y, z;
 	int ret;
 
 	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
 	case IIO_CHAN_INFO_RAW:
 		pm_runtime_get_sync(yas5xx->dev);
-		ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z);
+		ret = ci->get_measure(yas5xx, &t, &x, &y, &z);
 		pm_runtime_mark_last_busy(yas5xx->dev);
 		pm_runtime_put_autosuspend(yas5xx->dev);
 		if (ret)
@@ -412,19 +645,8 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev,
 		}
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		if (chan->address == 0) {
-			/* Temperature is unscaled */
-			*val = 1;
-			return IIO_VAL_INT;
-		}
-		/*
-		 * The axis values are in nanotesla according to the vendor
-		 * drivers, but is clearly in microtesla according to
-		 * experiments. Since 1 uT = 0.01 Gauss, we need to divide
-		 * by 100000000 (10^8) to get to Gauss from the raw value.
-		 */
 		*val = 1;
-		*val2 = 100000000;
+		*val2 = ci->scaling_val2;
 		return IIO_VAL_FRACTIONAL;
 	default:
 		/* Unknown request */
@@ -435,11 +657,12 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev,
 static void yas5xx_fill_buffer(struct iio_dev *indio_dev)
 {
 	struct yas5xx *yas5xx = iio_priv(indio_dev);
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
 	s32 t, x, y, z;
 	int ret;
 
 	pm_runtime_get_sync(yas5xx->dev);
-	ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z);
+	ret = ci->get_measure(yas5xx, &t, &x, &y, &z);
 	pm_runtime_mark_last_busy(yas5xx->dev);
 	pm_runtime_put_autosuspend(yas5xx->dev);
 	if (ret) {
@@ -505,7 +728,7 @@ static const struct iio_chan_spec yas5xx_channels[] = {
 		.address = 0,
 		.scan_index = 0,
 		.scan_type = {
-			.sign = 'u',
+			.sign = 's',
 			.realbits = 32,
 			.storagebits = 32,
 			.endianness = IIO_CPU,
@@ -525,9 +748,26 @@ static const struct iio_info yas5xx_info = {
 
 static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg)
 {
-	return reg == YAS5XX_ACTUATE_INIT_COIL ||
-		reg == YAS5XX_MEASURE ||
-		(reg >= YAS5XX_MEASURE_DATA && reg <= YAS5XX_MEASURE_DATA + 8);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct yas5xx *yas5xx = iio_priv(indio_dev);
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
+	int reg_qty;
+	int i;
+
+	if (reg >= YAS5XX_MEASURE_DATA && reg < YAS5XX_MEASURE_DATA + 8)
+		return true;
+
+	/*
+	 * YAS versions share different registers on the same address,
+	 * need to differentiate.
+	 */
+	reg_qty = ci->volatile_reg_qty;
+	for (i = 0; i < reg_qty; i++) {
+		if (reg == ci->volatile_reg[i])
+			return true;
+	}
+
+	return false;
 }
 
 /* TODO: enable regmap cache, using mark dirty and sync at runtime resume */
@@ -539,11 +779,13 @@ static const struct regmap_config yas5xx_regmap_config = {
 };
 
 /**
- * yas53x_extract_calibration() - extracts the a2-a9 and k calibration
+ * yas530_extract_calibration() - extracts the a2-a9 and k calibration
  * @data: the bitfield to use
  * @c: the calibration to populate
+ *
+ * Used by YAS530, YAS532 and YAS533.
  */
-static void yas53x_extract_calibration(u8 *data, struct yas5xx_calibration *c)
+static void yas530_extract_calibration(u8 *data, struct yas5xx_calibration *c)
 {
 	u64 val = get_unaligned_be64(data);
 
@@ -581,24 +823,27 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx)
 	int ret;
 
 	/* Dummy read, first read is ALWAYS wrong */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
 
 	/* Actual calibration readout */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
-	dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
+	dev_dbg(yas5xx->dev, "calibration data: %16ph\n", data);
 
+	/* Contribute calibration data to the input pool for kernel entropy */
 	add_device_randomness(data, sizeof(data));
+
+	/* Extract version */
 	yas5xx->version = data[15] & GENMASK(1, 0);
 
 	/* Extract the calibration from the bitfield */
 	c->Cx = data[0] * 6 - 768;
 	c->Cy1 = data[1] * 6 - 768;
 	c->Cy2 = data[2] * 6 - 768;
-	yas53x_extract_calibration(&data[3], c);
+	yas530_extract_calibration(&data[3], c);
 
 	/*
 	 * Extract linearization:
@@ -618,6 +863,7 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx)
 	c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5);
 	c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5);
 	c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5);
+
 	return 0;
 }
 
@@ -629,22 +875,22 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	int ret;
 
 	/* Dummy read, first read is ALWAYS wrong */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
 	/* Actual calibration readout */
-	ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+	ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
 	if (ret)
 		return ret;
-	dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
+	dev_dbg(yas5xx->dev, "calibration data: %14ph\n", data);
 
 	/* Sanity check, is this all zeroes? */
-	if (memchr_inv(data, 0x00, 13) == NULL) {
-		if (!(data[13] & BIT(7)))
-			dev_warn(yas5xx->dev, "calibration is blank!\n");
-	}
+	if (!memchr_inv(data, 0x00, 13) && !(data[13] & BIT(7)))
+		dev_warn(yas5xx->dev, "calibration is blank!\n");
 
+	/* Contribute calibration data to the input pool for kernel entropy */
 	add_device_randomness(data, sizeof(data));
+
 	/* Only one bit of version info reserved here as far as we know */
 	yas5xx->version = data[13] & BIT(0);
 
@@ -652,7 +898,8 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	c->Cx = data[0] * 10 - 1280;
 	c->Cy1 = data[1] * 10 - 1280;
 	c->Cy2 = data[2] * 10 - 1280;
-	yas53x_extract_calibration(&data[3], c);
+	yas530_extract_calibration(&data[3], c);
+
 	/*
 	 * Extract linearization:
 	 * Linearization layout in the 32 bits at byte 10:
@@ -675,7 +922,204 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	return 0;
 }
 
-static void yas5xx_dump_calibration(struct yas5xx *yas5xx)
+static int yas537_get_calibration_data(struct yas5xx *yas5xx)
+{
+	struct yas5xx_calibration *c = &yas5xx->calibration;
+	u8 data[17];
+	u32 val1, val2, val3, val4;
+	int i, ret;
+
+	/* Writing SRST register */
+	ret = regmap_write(yas5xx->map, YAS537_SRST, BIT(1));
+	if (ret)
+		return ret;
+
+	/* Calibration readout, YAS537 needs one readout only */
+	ret = regmap_bulk_read(yas5xx->map, YAS537_CAL, data, sizeof(data));
+	if (ret)
+		return ret;
+	dev_dbg(yas5xx->dev, "calibration data: %17ph\n", data);
+
+	/* Sanity check, is this all zeroes? */
+	if (!memchr_inv(data, 0x00, 16) && !FIELD_GET(GENMASK(5, 0), data[16]))
+		dev_warn(yas5xx->dev, "calibration is blank!\n");
+
+	/* Contribute calibration data to the input pool for kernel entropy */
+	add_device_randomness(data, sizeof(data));
+
+	/* Extract version information */
+	yas5xx->version = FIELD_GET(GENMASK(7, 6), data[16]);
+
+	/* There are two versions of YAS537 behaving differently */
+	switch (yas5xx->version) {
+	case YAS537_VERSION_0:
+		/*
+		 * The first version simply writes data back into registers:
+		 *
+		 * data[0]  YAS537_MTC		0x93
+		 * data[1]			0x94
+		 * data[2]			0x95
+		 * data[3]			0x96
+		 * data[4]			0x97
+		 * data[5]			0x98
+		 * data[6]			0x99
+		 * data[7]			0x9a
+		 * data[8]			0x9b
+		 * data[9]			0x9c
+		 * data[10]			0x9d
+		 * data[11] YAS537_OC		0x9e
+		 *
+		 * data[12] YAS537_OFFSET_X	0x84
+		 * data[13] YAS537_OFFSET_Y1	0x85
+		 * data[14] YAS537_OFFSET_Y2	0x86
+		 *
+		 * data[15] YAS537_HCK		0x88
+		 * data[16] YAS537_LCK		0x89
+		 */
+		for (i = 0; i < 12; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_MTC + i,
+					   data[i]);
+			if (ret)
+				return ret;
+		}
+		for (i = 0; i < 3; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
+					   data[i + 12]);
+			if (ret)
+				return ret;
+			yas5xx->hard_offsets[i] = data[i + 12];
+		}
+		for (i = 0; i < 2; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_HCK + i,
+					   data[i + 15]);
+			if (ret)
+				return ret;
+		}
+		break;
+	case YAS537_VERSION_1:
+		/*
+		 * The second version writes some data into registers but also
+		 * extracts calibration coefficients.
+		 *
+		 * Registers being written:
+		 *
+		 * data[0]  YAS537_MTC			0x93
+		 * data[1]  YAS537_MTC+1		0x94
+		 * data[2]  YAS537_MTC+2		0x95
+		 * data[3]  YAS537_MTC+3 (partially)	0x96
+		 *
+		 * data[12] YAS537_OFFSET_X		0x84
+		 * data[13] YAS537_OFFSET_Y1		0x85
+		 * data[14] YAS537_OFFSET_Y2		0x86
+		 *
+		 * data[15] YAS537_HCK (partially)	0x88
+		 *          YAS537_LCK (partially)	0x89
+		 * data[16] YAS537_OC  (partially)	0x9e
+		 */
+		for (i = 0; i < 3; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_MTC + i,
+					   data[i]);
+			if (ret)
+				return ret;
+		}
+		for (i = 0; i < 3; i++) {
+			ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
+					   data[i + 12]);
+			if (ret)
+				return ret;
+			yas5xx->hard_offsets[i] = data[i + 12];
+		}
+		/*
+		 * Visualization of partially taken data:
+		 *
+		 * data[3]       n 7 6 5 4 3 2 1 0
+		 * YAS537_MTC+3    x x x 1 0 0 0 0
+		 *
+		 * data[15]      n 7 6 5 4 3 2 1 0
+		 * YAS537_HCK      x x x x 0
+		 *
+		 * data[15]      n 7 6 5 4 3 2 1 0
+		 * YAS537_LCK              x x x x 0
+		 *
+		 * data[16]      n 7 6 5 4 3 2 1 0
+		 * YAS537_OC           x x x x x x
+		 */
+		ret = regmap_write(yas5xx->map, YAS537_MTC + 3,
+				   FIELD_PREP(YAS537_MTC3_MASK_PREP,
+				   FIELD_GET(YAS537_MTC3_MASK_GET, data[3])) |
+				   YAS537_MTC3_ADD_BIT);
+		if (ret)
+			return ret;
+		ret = regmap_write(yas5xx->map, YAS537_HCK,
+				   FIELD_PREP(YAS537_HCK_MASK_PREP,
+				   FIELD_GET(YAS537_HCK_MASK_GET, data[15])));
+		if (ret)
+			return ret;
+		ret = regmap_write(yas5xx->map, YAS537_LCK,
+				   FIELD_PREP(YAS537_LCK_MASK_PREP,
+				   FIELD_GET(YAS537_LCK_MASK_GET, data[15])));
+		if (ret)
+			return ret;
+		ret = regmap_write(yas5xx->map, YAS537_OC,
+				   FIELD_GET(YAS537_OC_MASK_GET, data[16]));
+		if (ret)
+			return ret;
+		/*
+		 * For data extraction, build some blocks. Four 32-bit blocks
+		 * look appropriate.
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[0]   0 [ Cx Cx Cx Cx Cx Cx Cx Cx ] bits 31 .. 24
+		 *  data[1]   1 [ Cx C1 C1 C1 C1 C1 C1 C1 ] bits 23 .. 16
+		 *  data[2]   2 [ C1 C1 C2 C2 C2 C2 C2 C2 ] bits 15 .. 8
+		 *  data[3]   3 [ C2 C2 C2                ] bits  7 .. 0
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[3]   0 [          a2 a2 a2 a2 a2 ] bits 31 .. 24
+		 *  data[4]   1 [ a2 a2 a3 a3 a3 a3 a3 a3 ] bits 23 .. 16
+		 *  data[5]   2 [ a3 a4 a4 a4 a4 a4 a4 a4 ] bits 15 .. 8
+		 *  data[6]   3 [ a4                      ] bits  7 .. 0
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[6]   0 [    a5 a5 a5 a5 a5 a5 a5 ] bits 31 .. 24
+		 *  data[7]   1 [ a5 a5 a6 a6 a6 a6 a6 a6 ] bits 23 .. 16
+		 *  data[8]   2 [ a6 a7 a7 a7 a7 a7 a7 a7 ] bits 15 .. 8
+		 *  data[9]   3 [ a7                      ] bits  7 .. 0
+		 *
+		 *            n    7  6  5  4  3  2  1  0
+		 *  data[9]   0 [    a8 a8 a8 a8 a8 a8 a8 ] bits 31 .. 24
+		 *  data[10]  1 [ a9 a9 a9 a9 a9 a9 a9 a9 ] bits 23 .. 16
+		 *  data[11]  2 [ a9  k  k  k  k  k  k  k ] bits 15 .. 8
+		 *  data[12]  3 [                         ] bits  7 .. 0
+		 */
+		val1 = get_unaligned_be32(&data[0]);
+		val2 = get_unaligned_be32(&data[3]);
+		val3 = get_unaligned_be32(&data[6]);
+		val4 = get_unaligned_be32(&data[9]);
+		/* Extract calibration coefficients and modify */
+		c->Cx  = FIELD_GET(GENMASK(31, 23), val1) - 256;
+		c->Cy1 = FIELD_GET(GENMASK(22, 14), val1) - 256;
+		c->Cy2 = FIELD_GET(GENMASK(13,  5), val1) - 256;
+		c->a2  = FIELD_GET(GENMASK(28, 22), val2) -  64;
+		c->a3  = FIELD_GET(GENMASK(21, 15), val2) -  64;
+		c->a4  = FIELD_GET(GENMASK(14,  7), val2) - 128;
+		c->a5  = FIELD_GET(GENMASK(30, 22), val3) - 112;
+		c->a6  = FIELD_GET(GENMASK(21, 15), val3) -  64;
+		c->a7  = FIELD_GET(GENMASK(14,  7), val3) - 128;
+		c->a8  = FIELD_GET(GENMASK(30, 24), val4) -  64;
+		c->a9  = FIELD_GET(GENMASK(23, 15), val4) - 112;
+		c->k   = FIELD_GET(GENMASK(14,  8), val4);
+		break;
+	default:
+		dev_err(yas5xx->dev, "unknown version of YAS537\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Used by YAS530, YAS532 and YAS533 */
+static void yas530_dump_calibration(struct yas5xx *yas5xx)
 {
 	struct yas5xx_calibration *c = &yas5xx->calibration;
 
@@ -698,20 +1142,42 @@ static void yas5xx_dump_calibration(struct yas5xx *yas5xx)
 	dev_dbg(yas5xx->dev, "dck = %d\n", c->dck);
 }
 
-static int yas5xx_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
+static void yas537_dump_calibration(struct yas5xx *yas5xx)
+{
+	struct yas5xx_calibration *c = &yas5xx->calibration;
+
+	if (yas5xx->version == YAS537_VERSION_1) {
+		dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx);
+		dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1);
+		dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2);
+		dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2);
+		dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3);
+		dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4);
+		dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5);
+		dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6);
+		dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7);
+		dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8);
+		dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9);
+		dev_dbg(yas5xx->dev, "k = %d\n", c->k);
+	}
+}
+
+/* Used by YAS530, YAS532 and YAS533 */
+static int yas530_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
 {
 	int ret;
 
-	ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_X, ox);
+	ret = regmap_write(yas5xx->map, YAS530_OFFSET_X, ox);
 	if (ret)
 		return ret;
-	ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_Y1, oy1);
+	ret = regmap_write(yas5xx->map, YAS530_OFFSET_Y1, oy1);
 	if (ret)
 		return ret;
-	return regmap_write(yas5xx->map, YAS5XX_OFFSET_Y2, oy2);
+	return regmap_write(yas5xx->map, YAS530_OFFSET_Y2, oy2);
 }
 
-static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure)
+/* Used by YAS530, YAS532 and YAS533 */
+static s8 yas530_adjust_offset(s8 old, int bit, u16 center, u16 measure)
 {
 	if (measure > center)
 		return old + BIT(bit);
@@ -720,8 +1186,10 @@ static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure)
 	return old;
 }
 
-static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
+/* Used by YAS530, YAS532 and YAS533 */
+static int yas530_measure_offsets(struct yas5xx *yas5xx)
 {
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
 	int ret;
 	u16 center;
 	u16 t, x, y1, y2;
@@ -729,12 +1197,12 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
 	int i;
 
 	/* Actuate the init coil and measure offsets */
-	ret = regmap_write(yas5xx->map, YAS5XX_ACTUATE_INIT_COIL, 0);
+	ret = regmap_write(yas5xx->map, YAS530_ACTUATE_INIT_COIL, 0);
 	if (ret)
 		return ret;
 
 	/* When the initcoil is active this should be around the center */
-	switch (yas5xx->devid) {
+	switch (ci->devid) {
 	case YAS530_DEVICE_ID:
 		center = YAS530_DATA_CENTER;
 		break;
@@ -763,26 +1231,26 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
 	oy2 = 0;
 
 	for (i = 4; i >= 0; i--) {
-		ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2);
+		ret = yas530_set_offsets(yas5xx, ox, oy1, oy2);
 		if (ret)
 			return ret;
 
-		ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2);
+		ret = yas530_measure(yas5xx, &t, &x, &y1, &y2);
 		if (ret)
 			return ret;
 		dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n",
 			5-i, x, y1, y2);
 
-		ox = yas5xx_adjust_offset(ox, i, center, x);
-		oy1 = yas5xx_adjust_offset(oy1, i, center, y1);
-		oy2 = yas5xx_adjust_offset(oy2, i, center, y2);
+		ox = yas530_adjust_offset(ox, i, center, x);
+		oy1 = yas530_adjust_offset(oy1, i, center, y1);
+		oy2 = yas530_adjust_offset(oy2, i, center, y2);
 	}
 
 	/* Needed for calibration algorithm */
 	yas5xx->hard_offsets[0] = ox;
 	yas5xx->hard_offsets[1] = oy1;
 	yas5xx->hard_offsets[2] = oy2;
-	ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2);
+	ret = yas530_set_offsets(yas5xx, ox, oy1, oy2);
 	if (ret)
 		return ret;
 
@@ -791,35 +1259,139 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
 	return 0;
 }
 
-static int yas5xx_power_on(struct yas5xx *yas5xx)
+/* Used by YAS530, YAS532 and YAS533 */
+static int yas530_power_on(struct yas5xx *yas5xx)
 {
 	unsigned int val;
 	int ret;
 
 	/* Zero the test registers */
-	ret = regmap_write(yas5xx->map, YAS5XX_TEST1, 0);
+	ret = regmap_write(yas5xx->map, YAS530_TEST1, 0);
 	if (ret)
 		return ret;
-	ret = regmap_write(yas5xx->map, YAS5XX_TEST2, 0);
+	ret = regmap_write(yas5xx->map, YAS530_TEST2, 0);
 	if (ret)
 		return ret;
 
 	/* Set up for no interrupts, calibrated clock divider */
 	val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck);
-	ret = regmap_write(yas5xx->map, YAS5XX_CONFIG, val);
+	ret = regmap_write(yas5xx->map, YAS530_CONFIG, val);
 	if (ret)
 		return ret;
 
 	/* Measure interval 0 (back-to-back?)  */
-	return regmap_write(yas5xx->map, YAS5XX_MEASURE_INTERVAL, 0);
+	return regmap_write(yas5xx->map, YAS530_MEASURE_INTERVAL, 0);
 }
 
+static int yas537_power_on(struct yas5xx *yas5xx)
+{
+	__be16 buf;
+	int ret;
+	u8 intrvl;
+
+	/* Writing ADCCAL and TRM registers */
+	buf = cpu_to_be16(GENMASK(9, 3));
+	ret = regmap_bulk_write(yas5xx->map, YAS537_ADCCAL, &buf, sizeof(buf));
+	if (ret)
+		return ret;
+	ret = regmap_write(yas5xx->map, YAS537_TRM, GENMASK(7, 0));
+	if (ret)
+		return ret;
+
+	/* The interval value is static in regular operation */
+	intrvl = (YAS537_DEFAULT_SENSOR_DELAY_MS * MILLI
+		 - YAS537_MEASURE_TIME_WORST_US) / 4100;
+	ret = regmap_write(yas5xx->map, YAS537_MEASURE_INTERVAL, intrvl);
+	if (ret)
+		return ret;
+
+	/* The average value is also static in regular operation */
+	ret = regmap_write(yas5xx->map, YAS537_AVR, YAS537_MAG_AVERAGE_32_MASK);
+	if (ret)
+		return ret;
+
+	/* Perform the "rcoil" part but skip the "last_after_rcoil" read */
+	ret = regmap_write(yas5xx->map, YAS537_CONFIG, BIT(3));
+	if (ret)
+		return ret;
+
+	/* Wait until the coil has ramped up */
+	usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100);
+
+	return 0;
+}
+
+static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = {
+	[yas530] = {
+		.devid = YAS530_DEVICE_ID,
+		.product_name = "YAS530 MS-3E",
+		.version_names = { "A", "B" },
+		.volatile_reg = yas530_volatile_reg,
+		.volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
+		.scaling_val2 = 100000000, /* picotesla to Gauss */
+		.t_ref = 182, /* counts */
+		.min_temp_x10 = -620, /* 1/10:s degrees Celsius */
+		.get_measure = yas530_get_measure,
+		.get_calibration_data = yas530_get_calibration_data,
+		.dump_calibration = yas530_dump_calibration,
+		.measure_offsets = yas530_measure_offsets,
+		.power_on = yas530_power_on,
+	},
+	[yas532] = {
+		.devid = YAS532_DEVICE_ID,
+		.product_name = "YAS532 MS-3R",
+		.version_names = { "AB", "AC" },
+		.volatile_reg = yas530_volatile_reg,
+		.volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
+		.scaling_val2 = 100000, /* nanotesla to Gauss */
+		.t_ref = 390, /* counts */
+		.min_temp_x10 = -500, /* 1/10:s degrees Celsius */
+		.get_measure = yas530_get_measure,
+		.get_calibration_data = yas532_get_calibration_data,
+		.dump_calibration = yas530_dump_calibration,
+		.measure_offsets = yas530_measure_offsets,
+		.power_on = yas530_power_on,
+	},
+	[yas533] = {
+		.devid = YAS532_DEVICE_ID,
+		.product_name = "YAS533 MS-3F",
+		.version_names = { "AB", "AC" },
+		.volatile_reg = yas530_volatile_reg,
+		.volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
+		.scaling_val2 = 100000, /* nanotesla to Gauss */
+		.t_ref = 390, /* counts */
+		.min_temp_x10 = -500, /* 1/10:s degrees Celsius */
+		.get_measure = yas530_get_measure,
+		.get_calibration_data = yas532_get_calibration_data,
+		.dump_calibration = yas530_dump_calibration,
+		.measure_offsets = yas530_measure_offsets,
+		.power_on = yas530_power_on,
+	},
+	[yas537] = {
+		.devid = YAS537_DEVICE_ID,
+		.product_name = "YAS537 MS-3T",
+		.version_names = { "v0", "v1" }, /* version naming unknown */
+		.volatile_reg = yas537_volatile_reg,
+		.volatile_reg_qty = ARRAY_SIZE(yas537_volatile_reg),
+		.scaling_val2 = 100000, /* nanotesla to Gauss */
+		.t_ref = 8120, /* counts */
+		.min_temp_x10 = -3860, /* 1/10:s degrees Celsius */
+		.get_measure = yas537_get_measure,
+		.get_calibration_data = yas537_get_calibration_data,
+		.dump_calibration = yas537_dump_calibration,
+		/* .measure_offets is not needed for yas537 */
+		.power_on = yas537_power_on,
+	},
+};
+
 static int yas5xx_probe(struct i2c_client *i2c,
 			const struct i2c_device_id *id)
 {
 	struct iio_dev *indio_dev;
 	struct device *dev = &i2c->dev;
 	struct yas5xx *yas5xx;
+	const struct yas5xx_chip_info *ci;
+	int id_check;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*yas5xx));
@@ -843,10 +1415,8 @@ static int yas5xx_probe(struct i2c_client *i2c,
 		return dev_err_probe(dev, ret, "cannot get regulators\n");
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
-	if (ret) {
-		dev_err(dev, "cannot enable regulators\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "cannot enable regulators\n");
 
 	/* See comment in runtime resume callback */
 	usleep_range(31000, 40000);
@@ -854,57 +1424,55 @@ static int yas5xx_probe(struct i2c_client *i2c,
 	/* This will take the device out of reset if need be */
 	yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(yas5xx->reset)) {
-		ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset),
-				    "failed to get reset line\n");
+		ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), "failed to get reset line\n");
 		goto reg_off;
 	}
 
 	yas5xx->map = devm_regmap_init_i2c(i2c, &yas5xx_regmap_config);
 	if (IS_ERR(yas5xx->map)) {
-		dev_err(dev, "failed to allocate register map\n");
-		ret = PTR_ERR(yas5xx->map);
+		ret = dev_err_probe(dev, PTR_ERR(yas5xx->map), "failed to allocate register map\n");
 		goto assert_reset;
 	}
 
-	ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &yas5xx->devid);
+	ci = device_get_match_data(dev);
+	if (!ci)
+		ci = (const struct yas5xx_chip_info *)id->driver_data;
+	yas5xx->chip_info = ci;
+
+	ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check);
 	if (ret)
 		goto assert_reset;
 
-	switch (yas5xx->devid) {
-	case YAS530_DEVICE_ID:
-		ret = yas530_get_calibration_data(yas5xx);
-		if (ret)
-			goto assert_reset;
-		dev_info(dev, "detected YAS530 MS-3E %s",
-			 yas5xx->version ? "B" : "A");
-		strncpy(yas5xx->name, "yas530", sizeof(yas5xx->name));
-		break;
-	case YAS532_DEVICE_ID:
-		ret = yas532_get_calibration_data(yas5xx);
-		if (ret)
-			goto assert_reset;
-		dev_info(dev, "detected YAS532/YAS533 MS-3R/F %s",
-			 yas5xx->version ? "AC" : "AB");
-		strncpy(yas5xx->name, "yas532", sizeof(yas5xx->name));
-		break;
-	default:
-		ret = -ENODEV;
-		dev_err(dev, "unhandled device ID %02x\n", yas5xx->devid);
+	if (id_check != ci->devid) {
+		ret = dev_err_probe(dev, -ENODEV,
+				    "device ID %02x doesn't match %s\n",
+				    id_check, id->name);
 		goto assert_reset;
 	}
 
-	yas5xx_dump_calibration(yas5xx);
-	ret = yas5xx_power_on(yas5xx);
+	ret = ci->get_calibration_data(yas5xx);
 	if (ret)
 		goto assert_reset;
-	ret = yas5xx_meaure_offsets(yas5xx);
+
+	dev_info(dev, "detected %s %s\n", ci->product_name,
+		 ci->version_names[yas5xx->version]);
+
+	ci->dump_calibration(yas5xx);
+
+	ret = ci->power_on(yas5xx);
 	if (ret)
 		goto assert_reset;
 
+	if (ci->measure_offsets) {
+		ret = ci->measure_offsets(yas5xx);
+		if (ret)
+			goto assert_reset;
+	}
+
 	indio_dev->info = &yas5xx_info;
 	indio_dev->available_scan_masks = yas5xx_scan_masks;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->name = yas5xx->name;
+	indio_dev->name = id->name;
 	indio_dev->channels = yas5xx_channels;
 	indio_dev->num_channels = ARRAY_SIZE(yas5xx_channels);
 
@@ -912,13 +1480,13 @@ static int yas5xx_probe(struct i2c_client *i2c,
 					 yas5xx_handle_trigger,
 					 NULL);
 	if (ret) {
-		dev_err(dev, "triggered buffer setup failed\n");
+		dev_err_probe(dev, ret, "triggered buffer setup failed\n");
 		goto assert_reset;
 	}
 
 	ret = iio_device_register(indio_dev);
 	if (ret) {
-		dev_err(dev, "device register failed\n");
+		dev_err_probe(dev, ret, "device register failed\n");
 		goto cleanup_buffer;
 	}
 
@@ -978,6 +1546,7 @@ static int yas5xx_runtime_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct yas5xx *yas5xx = iio_priv(indio_dev);
+	const struct yas5xx_chip_info *ci = yas5xx->chip_info;
 	int ret;
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
@@ -994,7 +1563,7 @@ static int yas5xx_runtime_resume(struct device *dev)
 	usleep_range(31000, 40000);
 	gpiod_set_value_cansleep(yas5xx->reset, 0);
 
-	ret = yas5xx_power_on(yas5xx);
+	ret = ci->power_on(yas5xx);
 	if (ret) {
 		dev_err(dev, "cannot power on\n");
 		goto out_reset;
@@ -1013,17 +1582,19 @@ static DEFINE_RUNTIME_DEV_PM_OPS(yas5xx_dev_pm_ops, yas5xx_runtime_suspend,
 				 yas5xx_runtime_resume, NULL);
 
 static const struct i2c_device_id yas5xx_id[] = {
-	{"yas530", },
-	{"yas532", },
-	{"yas533", },
+	{"yas530", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas530] },
+	{"yas532", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas532] },
+	{"yas533", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas533] },
+	{"yas537", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas537] },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, yas5xx_id);
 
 static const struct of_device_id yas5xx_of_match[] = {
-	{ .compatible = "yamaha,yas530", },
-	{ .compatible = "yamaha,yas532", },
-	{ .compatible = "yamaha,yas533", },
+	{ .compatible = "yamaha,yas530", &yas5xx_chip_info_tbl[yas530] },
+	{ .compatible = "yamaha,yas532", &yas5xx_chip_info_tbl[yas532] },
+	{ .compatible = "yamaha,yas533", &yas5xx_chip_info_tbl[yas533] },
+	{ .compatible = "yamaha,yas537", &yas5xx_chip_info_tbl[yas537] },
 	{}
 };
 MODULE_DEVICE_TABLE(of, yas5xx_of_match);
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 0ff756cea63a..c9453389e4f7 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -17,14 +17,14 @@ config ABP060MG
 	  will be called abp060mg.
 
 config BMP280
-	tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
+	tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor I2C driver"
 	depends on (I2C || SPI_MASTER)
 	select REGMAP
 	select BMP280_I2C if (I2C)
 	select BMP280_SPI if (SPI_MASTER)
 	help
-	  Say yes here to build support for Bosch Sensortec BMP180 and BMP280
-	  pressure and temperature sensors. Also supports the BME280 with
+	  Say yes here to build support for Bosch Sensortec BMP180, BMP280 and
+	  BMP380 pressure and temperature sensors. Also supports the BME280 with
 	  an additional humidity sensor channel.
 
 	  To compile this driver as a module, choose M here: the core module
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index fe7aa81e7cc9..c0aff78489b4 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -9,13 +9,22 @@
  * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
  *
  * Datasheet:
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf
+ * https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf
+ *
+ * Notice:
+ * The link to the bmp180 datasheet points to an outdated version missing these changes:
+ * - Changed document referral from ANP015 to BST-MPS-AN004-00 on page 26
+ * - Updated equation for B3 param on section 3.5 to ((((long)AC1 * 4 + X3) << oss) + 2) / 4
+ * - Updated RoHS directive to 2011/65/EU effective 8 June 2011 on page 26
  */
 
 #define pr_fmt(fmt) "bmp280: " fmt
 
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
@@ -30,6 +39,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/random.h>
 
+#include <asm/unaligned.h>
+
 #include "bmp280.h"
 
 /*
@@ -74,12 +85,51 @@ struct bmp280_calib {
 	s8  H6;
 };
 
+/* See datasheet Section 3.11.1. */
+struct bmp380_calib {
+	u16 T1;
+	u16 T2;
+	s8  T3;
+	s16 P1;
+	s16 P2;
+	s8  P3;
+	s8  P4;
+	u16 P5;
+	u16 P6;
+	s8  P7;
+	s8  P8;
+	s16 P9;
+	s8  P10;
+	s8  P11;
+};
+
 static const char *const bmp280_supply_names[] = {
 	"vddd", "vdda"
 };
 
 #define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
 
+enum bmp380_odr {
+	BMP380_ODR_200HZ,
+	BMP380_ODR_100HZ,
+	BMP380_ODR_50HZ,
+	BMP380_ODR_25HZ,
+	BMP380_ODR_12_5HZ,
+	BMP380_ODR_6_25HZ,
+	BMP380_ODR_3_125HZ,
+	BMP380_ODR_1_5625HZ,
+	BMP380_ODR_0_78HZ,
+	BMP380_ODR_0_39HZ,
+	BMP380_ODR_0_2HZ,
+	BMP380_ODR_0_1HZ,
+	BMP380_ODR_0_05HZ,
+	BMP380_ODR_0_02HZ,
+	BMP380_ODR_0_01HZ,
+	BMP380_ODR_0_006HZ,
+	BMP380_ODR_0_003HZ,
+	BMP380_ODR_0_0015HZ,
+};
+
 struct bmp280_data {
 	struct device *dev;
 	struct mutex lock;
@@ -90,6 +140,7 @@ struct bmp280_data {
 	union {
 		struct bmp180_calib bmp180;
 		struct bmp280_calib bmp280;
+		struct bmp380_calib bmp380;
 	} calib;
 	struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
 	unsigned int start_up_time; /* in microseconds */
@@ -98,36 +149,99 @@ struct bmp280_data {
 	u8 oversampling_press;
 	u8 oversampling_temp;
 	u8 oversampling_humid;
+	u8 iir_filter_coeff;
+
+	/*
+	 * BMP380 devices introduce sampling frequency configuration. See
+	 * datasheet sections 3.3.3. and 4.3.19 for more details.
+	 *
+	 * BMx280 devices allowed indirect configuration of sampling frequency
+	 * changing the t_standby duration between measurements, as detailed on
+	 * section 3.6.3 of the datasheet.
+	 */
+	int sampling_freq;
 
 	/*
 	 * Carryover value from temperature conversion, used in pressure
 	 * calculation.
 	 */
 	s32 t_fine;
+
+	/*
+	 * DMA (thus cache coherency maintenance) may require the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	union {
+		/* Sensor data buffer */
+		u8 buf[3];
+		/* Calibration data buffers */
+		__le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
+		__be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
+		u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT];
+		/* Miscellaneous, endianess-aware data buffers */
+		__le16 le16;
+		__be16 be16;
+	} __aligned(IIO_DMA_MINALIGN);
 };
 
 struct bmp280_chip_info {
+	unsigned int id_reg;
+
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	unsigned int start_up_time;
+
 	const int *oversampling_temp_avail;
 	int num_oversampling_temp_avail;
+	int oversampling_temp_default;
 
 	const int *oversampling_press_avail;
 	int num_oversampling_press_avail;
+	int oversampling_press_default;
 
 	const int *oversampling_humid_avail;
 	int num_oversampling_humid_avail;
+	int oversampling_humid_default;
+
+	const int *iir_filter_coeffs_avail;
+	int num_iir_filter_coeffs_avail;
+	int iir_filter_coeff_default;
+
+	const int (*sampling_freq_avail)[2];
+	int num_sampling_freq_avail;
+	int sampling_freq_default;
 
 	int (*chip_config)(struct bmp280_data *);
 	int (*read_temp)(struct bmp280_data *, int *);
 	int (*read_press)(struct bmp280_data *, int *, int *);
 	int (*read_humid)(struct bmp280_data *, int *, int *);
+	int (*read_calib)(struct bmp280_data *);
 };
 
 /*
  * These enums are used for indexing into the array of compensation
  * parameters for BMP280.
  */
-enum { T1, T2, T3 };
-enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
+enum { T1, T2, T3, P1, P2, P3, P4, P5, P6, P7, P8, P9 };
+
+enum {
+	/* Temperature calib indexes */
+	BMP380_T1 = 0,
+	BMP380_T2 = 2,
+	BMP380_T3 = 4,
+	/* Pressure calib indexes */
+	BMP380_P1 = 5,
+	BMP380_P2 = 7,
+	BMP380_P3 = 9,
+	BMP380_P4 = 10,
+	BMP380_P5 = 11,
+	BMP380_P6 = 13,
+	BMP380_P7 = 15,
+	BMP380_P8 = 16,
+	BMP380_P9 = 17,
+	BMP380_P10 = 19,
+	BMP380_P11 = 20,
+};
 
 static const struct iio_chan_spec bmp280_channels[] = {
 	{
@@ -147,56 +261,81 @@ static const struct iio_chan_spec bmp280_channels[] = {
 	},
 };
 
-static int bmp280_read_calib(struct bmp280_data *data,
-			     struct bmp280_calib *calib,
-			     unsigned int chip)
+static const struct iio_chan_spec bmp380_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+					   BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+					   BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+	},
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+					   BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+	},
+};
+
+static int bmp280_read_calib(struct bmp280_data *data)
 {
+	struct bmp280_calib *calib = &data->calib.bmp280;
 	int ret;
-	unsigned int tmp;
-	__le16 l16;
-	__be16 b16;
-	struct device *dev = data->dev;
-	__le16 t_buf[BMP280_COMP_TEMP_REG_COUNT / 2];
-	__le16 p_buf[BMP280_COMP_PRESS_REG_COUNT / 2];
 
-	/* Read temperature calibration values. */
+
+	/* Read temperature and pressure calibration values. */
 	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
-			       t_buf, BMP280_COMP_TEMP_REG_COUNT);
+			       data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf));
 	if (ret < 0) {
 		dev_err(data->dev,
-			"failed to read temperature calibration parameters\n");
+			"failed to read temperature and pressure calibration parameters\n");
 		return ret;
 	}
 
-	/* Toss the temperature calibration data into the entropy pool */
-	add_device_randomness(t_buf, sizeof(t_buf));
+	/* Toss the temperature and pressure calibration data into the entropy pool */
+	add_device_randomness(data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf));
+
+	/* Parse temperature calibration values. */
+	calib->T1 = le16_to_cpu(data->bmp280_cal_buf[T1]);
+	calib->T2 = le16_to_cpu(data->bmp280_cal_buf[T2]);
+	calib->T3 = le16_to_cpu(data->bmp280_cal_buf[T3]);
+
+	/* Parse pressure calibration values. */
+	calib->P1 = le16_to_cpu(data->bmp280_cal_buf[P1]);
+	calib->P2 = le16_to_cpu(data->bmp280_cal_buf[P2]);
+	calib->P3 = le16_to_cpu(data->bmp280_cal_buf[P3]);
+	calib->P4 = le16_to_cpu(data->bmp280_cal_buf[P4]);
+	calib->P5 = le16_to_cpu(data->bmp280_cal_buf[P5]);
+	calib->P6 = le16_to_cpu(data->bmp280_cal_buf[P6]);
+	calib->P7 = le16_to_cpu(data->bmp280_cal_buf[P7]);
+	calib->P8 = le16_to_cpu(data->bmp280_cal_buf[P8]);
+	calib->P9 = le16_to_cpu(data->bmp280_cal_buf[P9]);
 
-	calib->T1 = le16_to_cpu(t_buf[T1]);
-	calib->T2 = le16_to_cpu(t_buf[T2]);
-	calib->T3 = le16_to_cpu(t_buf[T3]);
+	return 0;
+}
 
-	/* Read pressure calibration values. */
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
-			       p_buf, BMP280_COMP_PRESS_REG_COUNT);
-	if (ret < 0) {
-		dev_err(data->dev,
-			"failed to read pressure calibration parameters\n");
+static int bme280_read_calib(struct bmp280_data *data)
+{
+	struct bmp280_calib *calib = &data->calib.bmp280;
+	struct device *dev = data->dev;
+	unsigned int tmp;
+	int ret;
+
+	/* Load shared calibration params with bmp280 first */
+	ret = bmp280_read_calib(data);
+	if  (ret < 0) {
+		dev_err(dev, "failed to read common bmp280 calibration parameters\n");
 		return ret;
 	}
 
-	/* Toss the pressure calibration data into the entropy pool */
-	add_device_randomness(p_buf, sizeof(p_buf));
-
-	calib->P1 = le16_to_cpu(p_buf[P1]);
-	calib->P2 = le16_to_cpu(p_buf[P2]);
-	calib->P3 = le16_to_cpu(p_buf[P3]);
-	calib->P4 = le16_to_cpu(p_buf[P4]);
-	calib->P5 = le16_to_cpu(p_buf[P5]);
-	calib->P6 = le16_to_cpu(p_buf[P6]);
-	calib->P7 = le16_to_cpu(p_buf[P7]);
-	calib->P8 = le16_to_cpu(p_buf[P8]);
-	calib->P9 = le16_to_cpu(p_buf[P9]);
-
 	/*
 	 * Read humidity calibration values.
 	 * Due to some odd register addressing we cannot just
@@ -204,8 +343,6 @@ static int bmp280_read_calib(struct bmp280_data *data,
 	 * value separately and sometimes do some bit shifting...
 	 * Humidity data is only available on BME280.
 	 */
-	if (chip != BME280_CHIP_ID)
-		return 0;
 
 	ret = regmap_read(data->regmap, BMP280_REG_COMP_H1, &tmp);
 	if (ret < 0) {
@@ -214,12 +351,13 @@ static int bmp280_read_calib(struct bmp280_data *data,
 	}
 	calib->H1 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &l16, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2,
+			       &data->le16, sizeof(data->le16));
 	if (ret < 0) {
 		dev_err(dev, "failed to read H2 comp value\n");
 		return ret;
 	}
-	calib->H2 = sign_extend32(le16_to_cpu(l16), 15);
+	calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15);
 
 	ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp);
 	if (ret < 0) {
@@ -228,20 +366,22 @@ static int bmp280_read_calib(struct bmp280_data *data,
 	}
 	calib->H3 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &b16, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4,
+			       &data->be16, sizeof(data->be16));
 	if (ret < 0) {
 		dev_err(dev, "failed to read H4 comp value\n");
 		return ret;
 	}
-	calib->H4 = sign_extend32(((be16_to_cpu(b16) >> 4) & 0xff0) |
-				  (be16_to_cpu(b16) & 0xf), 11);
+	calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) |
+				  (be16_to_cpu(data->be16) & 0xf), 11);
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &l16, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5,
+			       &data->le16, sizeof(data->le16));
 	if (ret < 0) {
 		dev_err(dev, "failed to read H5 comp value\n");
 		return ret;
 	}
-	calib->H5 = sign_extend32(((le16_to_cpu(l16) >> 4) & 0xfff), 11);
+	calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11);
 
 	ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp);
 	if (ret < 0) {
@@ -261,8 +401,8 @@ static int bmp280_read_calib(struct bmp280_data *data,
 static u32 bmp280_compensate_humidity(struct bmp280_data *data,
 				      s32 adc_humidity)
 {
-	s32 var;
 	struct bmp280_calib *calib = &data->calib.bmp280;
+	s32 var;
 
 	var = ((s32)data->t_fine) - (s32)76800;
 	var = ((((adc_humidity << 14) - (calib->H4 << 20) - (calib->H5 * var))
@@ -286,8 +426,8 @@ static u32 bmp280_compensate_humidity(struct bmp280_data *data,
 static s32 bmp280_compensate_temp(struct bmp280_data *data,
 				  s32 adc_temp)
 {
-	s32 var1, var2;
 	struct bmp280_calib *calib = &data->calib.bmp280;
+	s32 var1, var2;
 
 	var1 = (((adc_temp >> 3) - ((s32)calib->T1 << 1)) *
 		((s32)calib->T2)) >> 11;
@@ -309,8 +449,8 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data,
 static u32 bmp280_compensate_press(struct bmp280_data *data,
 				   s32 adc_press)
 {
-	s64 var1, var2, p;
 	struct bmp280_calib *calib = &data->calib.bmp280;
+	s64 var1, var2, p;
 
 	var1 = ((s64)data->t_fine) - 128000;
 	var2 = var1 * var1 * (s64)calib->P6;
@@ -335,17 +475,17 @@ static u32 bmp280_compensate_press(struct bmp280_data *data,
 static int bmp280_read_temp(struct bmp280_data *data,
 			    int *val)
 {
-	int ret;
-	__be32 tmp = 0;
 	s32 adc_temp, comp_temp;
+	int ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, &tmp, 3);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
+			       data->buf, sizeof(data->buf));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read temperature\n");
 		return ret;
 	}
 
-	adc_temp = be32_to_cpu(tmp) >> 12;
+	adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
 	if (adc_temp == BMP280_TEMP_SKIPPED) {
 		/* reading was skipped */
 		dev_err(data->dev, "reading temperature skipped\n");
@@ -368,23 +508,23 @@ static int bmp280_read_temp(struct bmp280_data *data,
 static int bmp280_read_press(struct bmp280_data *data,
 			     int *val, int *val2)
 {
-	int ret;
-	__be32 tmp = 0;
-	s32 adc_press;
 	u32 comp_press;
+	s32 adc_press;
+	int ret;
 
 	/* Read and compensate temperature so we get a reading of t_fine. */
 	ret = bmp280_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, &tmp, 3);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
+			       data->buf, sizeof(data->buf));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read pressure\n");
 		return ret;
 	}
 
-	adc_press = be32_to_cpu(tmp) >> 12;
+	adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
 	if (adc_press == BMP280_PRESS_SKIPPED) {
 		/* reading was skipped */
 		dev_err(data->dev, "reading pressure skipped\n");
@@ -400,23 +540,23 @@ static int bmp280_read_press(struct bmp280_data *data,
 
 static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
 {
-	__be16 tmp;
-	int ret;
-	s32 adc_humidity;
 	u32 comp_humidity;
+	s32 adc_humidity;
+	int ret;
 
 	/* Read and compensate temperature so we get a reading of t_fine. */
 	ret = bmp280_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, &tmp, 2);
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB,
+			       &data->be16, sizeof(data->be16));
 	if (ret < 0) {
 		dev_err(data->dev, "failed to read humidity\n");
 		return ret;
 	}
 
-	adc_humidity = be16_to_cpu(tmp);
+	adc_humidity = be16_to_cpu(data->be16);
 	if (adc_humidity == BMP280_HUMIDITY_SKIPPED) {
 		/* reading was skipped */
 		dev_err(data->dev, "reading humidity skipped\n");
@@ -433,8 +573,8 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
 			   int *val, int *val2, long mask)
 {
-	int ret;
 	struct bmp280_data *data = iio_priv(indio_dev);
+	int ret;
 
 	pm_runtime_get_sync(data->dev);
 	mutex_lock(&data->lock);
@@ -475,6 +615,25 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
 			break;
 		}
 		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (!data->chip_info->sampling_freq_avail) {
+			ret = -EINVAL;
+			break;
+		}
+
+		*val = data->chip_info->sampling_freq_avail[data->sampling_freq][0];
+		*val2 = data->chip_info->sampling_freq_avail[data->sampling_freq][1];
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		if (!data->chip_info->iir_filter_coeffs_avail) {
+			ret = -EINVAL;
+			break;
+		}
+
+		*val = (1 << data->iir_filter_coeff) - 1;
+		ret = IIO_VAL_INT;
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -490,15 +649,23 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
 static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data,
 					       int val)
 {
-	int i;
 	const int *avail = data->chip_info->oversampling_humid_avail;
 	const int n = data->chip_info->num_oversampling_humid_avail;
+	int ret, prev;
+	int i;
 
 	for (i = 0; i < n; i++) {
 		if (avail[i] == val) {
+			prev = data->oversampling_humid;
 			data->oversampling_humid = ilog2(val);
 
-			return data->chip_info->chip_config(data);
+			ret = data->chip_info->chip_config(data);
+			if (ret) {
+				data->oversampling_humid = prev;
+				data->chip_info->chip_config(data);
+				return ret;
+			}
+			return 0;
 		}
 	}
 	return -EINVAL;
@@ -507,15 +674,23 @@ static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data,
 static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
 					       int val)
 {
-	int i;
 	const int *avail = data->chip_info->oversampling_temp_avail;
 	const int n = data->chip_info->num_oversampling_temp_avail;
+	int ret, prev;
+	int i;
 
 	for (i = 0; i < n; i++) {
 		if (avail[i] == val) {
+			prev = data->oversampling_temp;
 			data->oversampling_temp = ilog2(val);
 
-			return data->chip_info->chip_config(data);
+			ret = data->chip_info->chip_config(data);
+			if (ret) {
+				data->oversampling_temp = prev;
+				data->chip_info->chip_config(data);
+				return ret;
+			}
+			return 0;
 		}
 	}
 	return -EINVAL;
@@ -524,15 +699,73 @@ static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
 static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data,
 					       int val)
 {
-	int i;
 	const int *avail = data->chip_info->oversampling_press_avail;
 	const int n = data->chip_info->num_oversampling_press_avail;
+	int ret, prev;
+	int i;
 
 	for (i = 0; i < n; i++) {
 		if (avail[i] == val) {
+			prev = data->oversampling_press;
 			data->oversampling_press = ilog2(val);
 
-			return data->chip_info->chip_config(data);
+			ret = data->chip_info->chip_config(data);
+			if (ret) {
+				data->oversampling_press = prev;
+				data->chip_info->chip_config(data);
+				return ret;
+			}
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int bmp280_write_sampling_frequency(struct bmp280_data *data,
+					   int val, int val2)
+{
+	const int (*avail)[2] = data->chip_info->sampling_freq_avail;
+	const int n = data->chip_info->num_sampling_freq_avail;
+	int ret, prev;
+	int i;
+
+	for (i = 0; i < n; i++) {
+		if (avail[i][0] == val && avail[i][1] == val2) {
+			prev = data->sampling_freq;
+			data->sampling_freq = i;
+
+			ret = data->chip_info->chip_config(data);
+			if (ret) {
+				data->sampling_freq = prev;
+				data->chip_info->chip_config(data);
+				return ret;
+			}
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int bmp280_write_iir_filter_coeffs(struct bmp280_data *data, int val)
+{
+	const int *avail = data->chip_info->iir_filter_coeffs_avail;
+	const int n = data->chip_info->num_iir_filter_coeffs_avail;
+	int ret, prev;
+	int i;
+
+	for (i = 0; i < n; i++) {
+		if (avail[i] - 1  == val) {
+			prev = data->iir_filter_coeff;
+			data->iir_filter_coeff = i;
+
+			ret = data->chip_info->chip_config(data);
+			if (ret) {
+				data->iir_filter_coeff = prev;
+				data->chip_info->chip_config(data);
+				return ret;
+
+			}
+			return 0;
 		}
 	}
 	return -EINVAL;
@@ -542,9 +775,15 @@ static int bmp280_write_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int val, int val2, long mask)
 {
-	int ret = 0;
 	struct bmp280_data *data = iio_priv(indio_dev);
+	int ret = 0;
 
+	/*
+	 * Helper functions to update sensor running configuration.
+	 * If an error happens applying new settings, will try restore
+	 * previous parameters to ensure the sensor is left in a known
+	 * working configuration.
+	 */
 	switch (mask) {
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		pm_runtime_get_sync(data->dev);
@@ -567,6 +806,22 @@ static int bmp280_write_raw(struct iio_dev *indio_dev,
 		pm_runtime_mark_last_busy(data->dev);
 		pm_runtime_put_autosuspend(data->dev);
 		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		pm_runtime_get_sync(data->dev);
+		mutex_lock(&data->lock);
+		ret = bmp280_write_sampling_frequency(data, val, val2);
+		mutex_unlock(&data->lock);
+		pm_runtime_mark_last_busy(data->dev);
+		pm_runtime_put_autosuspend(data->dev);
+		break;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		pm_runtime_get_sync(data->dev);
+		mutex_lock(&data->lock);
+		ret = bmp280_write_iir_filter_coeffs(data, val);
+		mutex_unlock(&data->lock);
+		pm_runtime_mark_last_busy(data->dev);
+		pm_runtime_put_autosuspend(data->dev);
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -597,6 +852,17 @@ static int bmp280_read_avail(struct iio_dev *indio_dev,
 		}
 		*type = IIO_VAL_INT;
 		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (const int *)data->chip_info->sampling_freq_avail;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		/* Values are stored in a 2D matrix */
+		*length = data->chip_info->num_sampling_freq_avail;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		*vals = data->chip_info->iir_filter_coeffs_avail;
+		*type = IIO_VAL_INT;
+		*length = data->chip_info->num_iir_filter_coeffs_avail;
+		return IIO_AVAIL_LIST;
 	default:
 		return -EINVAL;
 	}
@@ -610,9 +876,9 @@ static const struct iio_info bmp280_info = {
 
 static int bmp280_chip_config(struct bmp280_data *data)
 {
+	u8 osrs = FIELD_PREP(BMP280_OSRS_TEMP_MASK, data->oversampling_temp + 1) |
+		  FIELD_PREP(BMP280_OSRS_PRESS_MASK, data->oversampling_press + 1);
 	int ret;
-	u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) |
-		  BMP280_OSRS_PRESS_X(data->oversampling_press + 1);
 
 	ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS,
 				 BMP280_OSRS_TEMP_MASK |
@@ -640,21 +906,39 @@ static int bmp280_chip_config(struct bmp280_data *data)
 static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
 
 static const struct bmp280_chip_info bmp280_chip_info = {
+	.id_reg = BMP280_REG_ID,
+	.start_up_time = 2000,
+	.channels = bmp280_channels,
+	.num_channels = 2,
+
 	.oversampling_temp_avail = bmp280_oversampling_avail,
 	.num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+	/*
+	 * Oversampling config values on BMx280 have one additional setting
+	 * that other generations of the family don't:
+	 * The value 0 means the measurement is bypassed instead of
+	 * oversampling set to x1.
+	 *
+	 * To account for this difference, and preserve the same common
+	 * config logic, this is handled later on chip_config callback
+	 * incrementing one unit the oversampling setting.
+	 */
+	.oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1,
 
 	.oversampling_press_avail = bmp280_oversampling_avail,
 	.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+	.oversampling_press_default = BMP280_OSRS_PRESS_16X - 1,
 
 	.chip_config = bmp280_chip_config,
 	.read_temp = bmp280_read_temp,
 	.read_press = bmp280_read_press,
+	.read_calib = bmp280_read_calib,
 };
 
 static int bme280_chip_config(struct bmp280_data *data)
 {
+	u8 osrs = FIELD_PREP(BMP280_OSRS_HUMIDITY_MASK, data->oversampling_humid + 1);
 	int ret;
-	u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1);
 
 	/*
 	 * Oversampling of humidity must be set before oversampling of
@@ -670,27 +954,405 @@ static int bme280_chip_config(struct bmp280_data *data)
 }
 
 static const struct bmp280_chip_info bme280_chip_info = {
+	.id_reg = BMP280_REG_ID,
+	.start_up_time = 2000,
+	.channels = bmp280_channels,
+	.num_channels = 3,
+
 	.oversampling_temp_avail = bmp280_oversampling_avail,
 	.num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+	.oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1,
 
 	.oversampling_press_avail = bmp280_oversampling_avail,
 	.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+	.oversampling_press_default = BMP280_OSRS_PRESS_16X - 1,
 
 	.oversampling_humid_avail = bmp280_oversampling_avail,
 	.num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+	.oversampling_humid_default = BMP280_OSRS_HUMIDITY_16X - 1,
 
 	.chip_config = bme280_chip_config,
 	.read_temp = bmp280_read_temp,
 	.read_press = bmp280_read_press,
 	.read_humid = bmp280_read_humid,
+	.read_calib = bme280_read_calib,
 };
 
-static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
+/*
+ * Helper function to send a command to BMP3XX sensors.
+ *
+ * Sensor processes commands written to the CMD register and signals
+ * execution result through "cmd_rdy" and "cmd_error" flags available on
+ * STATUS and ERROR registers.
+ */
+static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
+{
+	unsigned int reg;
+	int ret;
+
+	/* Check if device is ready to process a command */
+	ret = regmap_read(data->regmap, BMP380_REG_STATUS, &reg);
+	if (ret) {
+		dev_err(data->dev, "failed to read error register\n");
+		return ret;
+	}
+	if (!(reg & BMP380_STATUS_CMD_RDY_MASK)) {
+		dev_err(data->dev, "device is not ready to accept commands\n");
+		return -EBUSY;
+	}
+
+	/* Send command to process */
+	ret = regmap_write(data->regmap, BMP380_REG_CMD, cmd);
+	if (ret) {
+		dev_err(data->dev, "failed to send command to device\n");
+		return ret;
+	}
+	/* Wait for 2ms for command to be processed */
+	usleep_range(data->start_up_time, data->start_up_time + 100);
+	/* Check for command processing error */
+	ret = regmap_read(data->regmap, BMP380_REG_ERROR, &reg);
+	if (ret) {
+		dev_err(data->dev, "error reading ERROR reg\n");
+		return ret;
+	}
+	if (reg & BMP380_ERR_CMD_MASK) {
+		dev_err(data->dev, "error processing command 0x%X\n", cmd);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Returns temperature in Celsius dregrees, resolution is 0.01º C. Output value of
+ * "5123" equals 51.2º C. t_fine carries fine temperature as global value.
+ *
+ * Taken from datasheet, Section Appendix 9, "Compensation formula" and repo
+ * https://github.com/BoschSensortec/BMP3-Sensor-API.
+ */
+static s32 bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp)
+{
+	s64 var1, var2, var3, var4, var5, var6, comp_temp;
+	struct bmp380_calib *calib = &data->calib.bmp380;
+
+	var1 = ((s64) adc_temp) - (((s64) calib->T1) << 8);
+	var2 = var1 * ((s64) calib->T2);
+	var3 = var1 * var1;
+	var4 = var3 * ((s64) calib->T3);
+	var5 = (var2 << 18) + var4;
+	var6 = var5 >> 32;
+	data->t_fine = (s32) var6;
+	comp_temp = (var6 * 25) >> 14;
+
+	comp_temp = clamp_val(comp_temp, BMP380_MIN_TEMP, BMP380_MAX_TEMP);
+	return (s32) comp_temp;
+}
+
+/*
+ * Returns pressure in Pa as an unsigned 32 bit integer in fractional Pascal.
+ * Output value of "9528709" represents 9528709/100 = 95287.09 Pa = 952.8709 hPa.
+ *
+ * Taken from datasheet, Section 9.3. "Pressure compensation" and repository
+ * https://github.com/BoschSensortec/BMP3-Sensor-API.
+ */
+static u32 bmp380_compensate_press(struct bmp280_data *data, u32 adc_press)
+{
+	s64 var1, var2, var3, var4, var5, var6, offset, sensitivity;
+	struct bmp380_calib *calib = &data->calib.bmp380;
+	u32 comp_press;
+
+	var1 = (s64)data->t_fine * (s64)data->t_fine;
+	var2 = var1 >> 6;
+	var3 = (var2 * ((s64) data->t_fine)) >> 8;
+	var4 = ((s64)calib->P8 * var3) >> 5;
+	var5 = ((s64)calib->P7 * var1) << 4;
+	var6 = ((s64)calib->P6 * (s64)data->t_fine) << 22;
+	offset = ((s64)calib->P5 << 47) + var4 + var5 + var6;
+	var2 = ((s64)calib->P4 * var3) >> 5;
+	var4 = ((s64)calib->P3 * var1) << 2;
+	var5 = ((s64)calib->P2 - ((s64)1 << 14)) *
+	       ((s64)data->t_fine << 21);
+	sensitivity = (((s64) calib->P1 - ((s64) 1 << 14)) << 46) +
+			var2 + var4 + var5;
+	var1 = (sensitivity >> 24) * (s64)adc_press;
+	var2 = (s64)calib->P10 * (s64)data->t_fine;
+	var3 = var2 + ((s64)calib->P9 << 16);
+	var4 = (var3 * (s64)adc_press) >> 13;
+
+	/*
+	 * Dividing by 10 followed by multiplying by 10 to avoid
+	 * possible overflow caused by (uncomp_data->pressure * partial_data4).
+	 */
+	var5 = ((s64)adc_press * div_s64(var4, 10)) >> 9;
+	var5 *= 10;
+	var6 = (s64)adc_press * (s64)adc_press;
+	var2 = ((s64)calib->P11 * var6) >> 16;
+	var3 = (var2 * (s64)adc_press) >> 7;
+	var4 = (offset >> 2) + var1 + var5 + var3;
+	comp_press = ((u64)var4 * 25) >> 40;
+
+	comp_press = clamp_val(comp_press, BMP380_MIN_PRES, BMP380_MAX_PRES);
+	return comp_press;
+}
+
+static int bmp380_read_temp(struct bmp280_data *data, int *val)
+{
+	s32 comp_temp;
+	u32 adc_temp;
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB,
+			       data->buf, sizeof(data->buf));
+	if (ret) {
+		dev_err(data->dev, "failed to read temperature\n");
+		return ret;
+	}
+
+	adc_temp = get_unaligned_le24(data->buf);
+	if (adc_temp == BMP380_TEMP_SKIPPED) {
+		dev_err(data->dev, "reading temperature skipped\n");
+		return -EIO;
+	}
+	comp_temp = bmp380_compensate_temp(data, adc_temp);
+
+	/*
+	 * Val might be NULL if we're called by the read_press routine,
+	 * who only cares about the carry over t_fine value.
+	 */
+	if (val) {
+		/* IIO reports temperatures in milli Celsius */
+		*val = comp_temp * 10;
+		return IIO_VAL_INT;
+	}
+
+	return 0;
+}
+
+static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
+{
+	s32 comp_press;
+	u32 adc_press;
+	int ret;
+
+	/* Read and compensate for temperature so we get a reading of t_fine */
+	ret = bmp380_read_temp(data, NULL);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB,
+			       data->buf, sizeof(data->buf));
+	if (ret) {
+		dev_err(data->dev, "failed to read pressure\n");
+		return ret;
+	}
+
+	adc_press = get_unaligned_le24(data->buf);
+	if (adc_press == BMP380_PRESS_SKIPPED) {
+		dev_err(data->dev, "reading pressure skipped\n");
+		return -EIO;
+	}
+	comp_press = bmp380_compensate_press(data, adc_press);
+
+	*val = comp_press;
+	/* Compensated pressure is in cPa (centipascals) */
+	*val2 = 100000;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int bmp380_read_calib(struct bmp280_data *data)
+{
+	struct bmp380_calib *calib = &data->calib.bmp380;
+	int ret;
+
+	/* Read temperature and pressure calibration data */
+	ret = regmap_bulk_read(data->regmap, BMP380_REG_CALIB_TEMP_START,
+			       data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf));
+	if (ret) {
+		dev_err(data->dev,
+			"failed to read temperature calibration parameters\n");
+		return ret;
+	}
+
+	/* Toss the temperature calibration data into the entropy pool */
+	add_device_randomness(data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf));
+
+	/* Parse calibration values */
+	calib->T1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T1]);
+	calib->T2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T2]);
+	calib->T3 = data->bmp380_cal_buf[BMP380_T3];
+	calib->P1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P1]);
+	calib->P2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P2]);
+	calib->P3 = data->bmp380_cal_buf[BMP380_P3];
+	calib->P4 = data->bmp380_cal_buf[BMP380_P4];
+	calib->P5 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P5]);
+	calib->P6 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P6]);
+	calib->P7 = data->bmp380_cal_buf[BMP380_P7];
+	calib->P8 = data->bmp380_cal_buf[BMP380_P8];
+	calib->P9 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P9]);
+	calib->P10 = data->bmp380_cal_buf[BMP380_P10];
+	calib->P11 = data->bmp380_cal_buf[BMP380_P11];
+
+	return 0;
+}
+
+static const int bmp380_odr_table[][2] = {
+	[BMP380_ODR_200HZ]	= {200, 0},
+	[BMP380_ODR_100HZ]	= {100, 0},
+	[BMP380_ODR_50HZ]	= {50, 0},
+	[BMP380_ODR_25HZ]	= {25, 0},
+	[BMP380_ODR_12_5HZ]	= {12, 500000},
+	[BMP380_ODR_6_25HZ]	= {6, 250000},
+	[BMP380_ODR_3_125HZ]	= {3, 125000},
+	[BMP380_ODR_1_5625HZ]	= {1, 562500},
+	[BMP380_ODR_0_78HZ]	= {0, 781250},
+	[BMP380_ODR_0_39HZ]	= {0, 390625},
+	[BMP380_ODR_0_2HZ]	= {0, 195313},
+	[BMP380_ODR_0_1HZ]	= {0, 97656},
+	[BMP380_ODR_0_05HZ]	= {0, 48828},
+	[BMP380_ODR_0_02HZ]	= {0, 24414},
+	[BMP380_ODR_0_01HZ]	= {0, 12207},
+	[BMP380_ODR_0_006HZ]	= {0, 6104},
+	[BMP380_ODR_0_003HZ]	= {0, 3052},
+	[BMP380_ODR_0_0015HZ]	= {0, 1526},
+};
+
+static int bmp380_chip_config(struct bmp280_data *data)
 {
+	bool change = false, aux;
+	unsigned int tmp;
+	u8 osrs;
 	int ret;
+
+	/* Configure power control register */
+	ret = regmap_update_bits(data->regmap, BMP380_REG_POWER_CONTROL,
+				 BMP380_CTRL_SENSORS_MASK,
+				 BMP380_CTRL_SENSORS_PRESS_EN |
+				 BMP380_CTRL_SENSORS_TEMP_EN);
+	if (ret) {
+		dev_err(data->dev,
+			"failed to write operation control register\n");
+		return ret;
+	}
+
+	/* Configure oversampling */
+	osrs = FIELD_PREP(BMP380_OSRS_TEMP_MASK, data->oversampling_temp) |
+	       FIELD_PREP(BMP380_OSRS_PRESS_MASK, data->oversampling_press);
+
+	ret = regmap_update_bits_check(data->regmap, BMP380_REG_OSR,
+				       BMP380_OSRS_TEMP_MASK |
+				       BMP380_OSRS_PRESS_MASK,
+				       osrs, &aux);
+	if (ret) {
+		dev_err(data->dev, "failed to write oversampling register\n");
+		return ret;
+	}
+	change = change || aux;
+
+	/* Configure output data rate */
+	ret = regmap_update_bits_check(data->regmap, BMP380_REG_ODR,
+				       BMP380_ODRS_MASK, data->sampling_freq, &aux);
+	if (ret) {
+		dev_err(data->dev, "failed to write ODR selection register\n");
+		return ret;
+	}
+	change = change || aux;
+
+	/* Set filter data */
+	ret = regmap_update_bits_check(data->regmap, BMP380_REG_CONFIG, BMP380_FILTER_MASK,
+				       FIELD_PREP(BMP380_FILTER_MASK, data->iir_filter_coeff),
+				       &aux);
+	if (ret) {
+		dev_err(data->dev, "failed to write config register\n");
+		return ret;
+	}
+	change = change || aux;
+
+	if (change) {
+		/*
+		 * The configurations errors are detected on the fly during a measurement
+		 * cycle. If the sampling frequency is too low, it's faster to reset
+		 * the measurement loop than wait until the next measurement is due.
+		 *
+		 * Resets sensor measurement loop toggling between sleep and normal
+		 * operating modes.
+		 */
+		ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
+					BMP380_MODE_MASK,
+					FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_SLEEP));
+		if (ret) {
+			dev_err(data->dev, "failed to set sleep mode\n");
+			return ret;
+		}
+		usleep_range(2000, 2500);
+		ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
+					BMP380_MODE_MASK,
+					FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_NORMAL));
+		if (ret) {
+			dev_err(data->dev, "failed to set normal mode\n");
+			return ret;
+		}
+		/*
+		 * Waits for measurement before checking configuration error flag.
+		 * Selected longest measure time indicated in section 3.9.1
+		 * in the datasheet.
+		 */
+		msleep(80);
+
+		/* Check config error flag */
+		ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp);
+		if (ret) {
+			dev_err(data->dev,
+				"failed to read error register\n");
+			return ret;
+		}
+		if (tmp & BMP380_ERR_CONF_MASK) {
+			dev_warn(data->dev,
+				"sensor flagged configuration as incompatible\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 };
+static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128};
+
+static const struct bmp280_chip_info bmp380_chip_info = {
+	.id_reg = BMP380_REG_ID,
+	.start_up_time = 2000,
+	.channels = bmp380_channels,
+	.num_channels = 2,
+
+	.oversampling_temp_avail = bmp380_oversampling_avail,
+	.num_oversampling_temp_avail = ARRAY_SIZE(bmp380_oversampling_avail),
+	.oversampling_temp_default = ilog2(1),
+
+	.oversampling_press_avail = bmp380_oversampling_avail,
+	.num_oversampling_press_avail = ARRAY_SIZE(bmp380_oversampling_avail),
+	.oversampling_press_default = ilog2(4),
+
+	.sampling_freq_avail = bmp380_odr_table,
+	.num_sampling_freq_avail = ARRAY_SIZE(bmp380_odr_table) * 2,
+	.sampling_freq_default = BMP380_ODR_50HZ,
+
+	.iir_filter_coeffs_avail = bmp380_iir_filter_coeffs_avail,
+	.num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail),
+	.iir_filter_coeff_default = 2,
+
+	.chip_config = bmp380_chip_config,
+	.read_temp = bmp380_read_temp,
+	.read_press = bmp380_read_press,
+	.read_calib = bmp380_read_calib,
+};
+
+static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
+{
 	const int conversion_time_max[] = { 4500, 7500, 13500, 25500 };
 	unsigned int delay_us;
 	unsigned int ctrl;
+	int ret;
 
 	if (data->use_eoc)
 		reinit_completion(&data->done);
@@ -710,7 +1372,7 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
 		if (!ret)
 			dev_err(data->dev, "timeout waiting for completion\n");
 	} else {
-		if (ctrl_meas == BMP180_MEAS_TEMP)
+		if (FIELD_GET(BMP180_MEAS_CTRL_MASK, ctrl_meas) == BMP180_MEAS_TEMP)
 			delay_us = 4500;
 		else
 			delay_us =
@@ -732,55 +1394,57 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
 
 static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
 {
-	__be16 tmp;
 	int ret;
 
-	ret = bmp180_measure(data, BMP180_MEAS_TEMP);
+	ret = bmp180_measure(data,
+			     FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_TEMP) |
+			     BMP180_MEAS_SCO);
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 2);
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
+			       &data->be16, sizeof(data->be16));
 	if (ret)
 		return ret;
 
-	*val = be16_to_cpu(tmp);
+	*val = be16_to_cpu(data->be16);
 
 	return 0;
 }
 
-static int bmp180_read_calib(struct bmp280_data *data,
-			     struct bmp180_calib *calib)
+static int bmp180_read_calib(struct bmp280_data *data)
 {
+	struct bmp180_calib *calib = &data->calib.bmp180;
 	int ret;
 	int i;
-	__be16 buf[BMP180_REG_CALIB_COUNT / 2];
 
-	ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf,
-			       sizeof(buf));
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START,
+			       data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
 
 	if (ret < 0)
 		return ret;
 
 	/* None of the words has the value 0 or 0xFFFF */
-	for (i = 0; i < ARRAY_SIZE(buf); i++) {
-		if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff))
+	for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) {
+		if (data->bmp180_cal_buf[i] == cpu_to_be16(0) ||
+		    data->bmp180_cal_buf[i] == cpu_to_be16(0xffff))
 			return -EIO;
 	}
 
 	/* Toss the calibration data into the entropy pool */
-	add_device_randomness(buf, sizeof(buf));
-
-	calib->AC1 = be16_to_cpu(buf[AC1]);
-	calib->AC2 = be16_to_cpu(buf[AC2]);
-	calib->AC3 = be16_to_cpu(buf[AC3]);
-	calib->AC4 = be16_to_cpu(buf[AC4]);
-	calib->AC5 = be16_to_cpu(buf[AC5]);
-	calib->AC6 = be16_to_cpu(buf[AC6]);
-	calib->B1 = be16_to_cpu(buf[B1]);
-	calib->B2 = be16_to_cpu(buf[B2]);
-	calib->MB = be16_to_cpu(buf[MB]);
-	calib->MC = be16_to_cpu(buf[MC]);
-	calib->MD = be16_to_cpu(buf[MD]);
+	add_device_randomness(data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
+
+	calib->AC1 = be16_to_cpu(data->bmp180_cal_buf[AC1]);
+	calib->AC2 = be16_to_cpu(data->bmp180_cal_buf[AC2]);
+	calib->AC3 = be16_to_cpu(data->bmp180_cal_buf[AC3]);
+	calib->AC4 = be16_to_cpu(data->bmp180_cal_buf[AC4]);
+	calib->AC5 = be16_to_cpu(data->bmp180_cal_buf[AC5]);
+	calib->AC6 = be16_to_cpu(data->bmp180_cal_buf[AC6]);
+	calib->B1 = be16_to_cpu(data->bmp180_cal_buf[B1]);
+	calib->B2 = be16_to_cpu(data->bmp180_cal_buf[B2]);
+	calib->MB = be16_to_cpu(data->bmp180_cal_buf[MB]);
+	calib->MC = be16_to_cpu(data->bmp180_cal_buf[MC]);
+	calib->MD = be16_to_cpu(data->bmp180_cal_buf[MD]);
 
 	return 0;
 }
@@ -793,8 +1457,8 @@ static int bmp180_read_calib(struct bmp280_data *data,
  */
 static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
 {
-	s32 x1, x2;
 	struct bmp180_calib *calib = &data->calib.bmp180;
+	s32 x1, x2;
 
 	x1 = ((adc_temp - calib->AC6) * calib->AC5) >> 15;
 	x2 = (calib->MC << 11) / (x1 + calib->MD);
@@ -805,8 +1469,8 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
 
 static int bmp180_read_temp(struct bmp280_data *data, int *val)
 {
-	int ret;
 	s32 adc_temp, comp_temp;
+	int ret;
 
 	ret = bmp180_read_adc_temp(data, &adc_temp);
 	if (ret)
@@ -828,19 +1492,22 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val)
 
 static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
 {
-	int ret;
-	__be32 tmp = 0;
 	u8 oss = data->oversampling_press;
+	int ret;
 
-	ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss));
+	ret = bmp180_measure(data,
+			     FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_PRESS) |
+			     FIELD_PREP(BMP180_OSRS_PRESS_MASK, oss) |
+			     BMP180_MEAS_SCO);
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 3);
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
+			       data->buf, sizeof(data->buf));
 	if (ret)
 		return ret;
 
-	*val = (be32_to_cpu(tmp) >> 8) >> (8 - oss);
+	*val = get_unaligned_be24(data->buf) >> (8 - oss);
 
 	return 0;
 }
@@ -852,11 +1519,11 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
  */
 static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
 {
+	struct bmp180_calib *calib = &data->calib.bmp180;
+	s32 oss = data->oversampling_press;
 	s32 x1, x2, x3, p;
 	s32 b3, b6;
 	u32 b4, b7;
-	s32 oss = data->oversampling_press;
-	struct bmp180_calib *calib = &data->calib.bmp180;
 
 	b6 = data->t_fine - 4000;
 	x1 = (calib->B2 * (b6 * b6 >> 12)) >> 11;
@@ -883,9 +1550,9 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
 static int bmp180_read_press(struct bmp280_data *data,
 			     int *val, int *val2)
 {
-	int ret;
-	s32 adc_press;
 	u32 comp_press;
+	s32 adc_press;
+	int ret;
 
 	/* Read and compensate temperature so we get a reading of t_fine. */
 	ret = bmp180_read_temp(data, NULL);
@@ -913,17 +1580,25 @@ static const int bmp180_oversampling_temp_avail[] = { 1 };
 static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
 
 static const struct bmp280_chip_info bmp180_chip_info = {
+	.id_reg = BMP280_REG_ID,
+	.start_up_time = 2000,
+	.channels = bmp280_channels,
+	.num_channels = 2,
+
 	.oversampling_temp_avail = bmp180_oversampling_temp_avail,
 	.num_oversampling_temp_avail =
 		ARRAY_SIZE(bmp180_oversampling_temp_avail),
+	.oversampling_temp_default = 0,
 
 	.oversampling_press_avail = bmp180_oversampling_press_avail,
 	.num_oversampling_press_avail =
 		ARRAY_SIZE(bmp180_oversampling_press_avail),
+	.oversampling_press_default = BMP180_MEAS_PRESS_8X,
 
 	.chip_config = bmp180_chip_config,
 	.read_temp = bmp180_read_temp,
 	.read_press = bmp180_read_press,
+	.read_calib = bmp180_read_calib,
 };
 
 static irqreturn_t bmp085_eoc_irq(int irq, void *d)
@@ -990,11 +1665,12 @@ int bmp280_common_probe(struct device *dev,
 			const char *name,
 			int irq)
 {
-	int ret;
+	const struct bmp280_chip_info *chip_info;
 	struct iio_dev *indio_dev;
 	struct bmp280_data *data;
-	unsigned int chip_id;
 	struct gpio_desc *gpiod;
+	unsigned int chip_id;
+	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
@@ -1005,36 +1681,36 @@ int bmp280_common_probe(struct device *dev,
 	data->dev = dev;
 
 	indio_dev->name = name;
-	indio_dev->channels = bmp280_channels;
 	indio_dev->info = &bmp280_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	switch (chip) {
 	case BMP180_CHIP_ID:
-		indio_dev->num_channels = 2;
-		data->chip_info = &bmp180_chip_info;
-		data->oversampling_press = ilog2(8);
-		data->oversampling_temp = ilog2(1);
-		data->start_up_time = 10000;
+		chip_info = &bmp180_chip_info;
 		break;
 	case BMP280_CHIP_ID:
-		indio_dev->num_channels = 2;
-		data->chip_info = &bmp280_chip_info;
-		data->oversampling_press = ilog2(16);
-		data->oversampling_temp = ilog2(2);
-		data->start_up_time = 2000;
+		chip_info = &bmp280_chip_info;
 		break;
 	case BME280_CHIP_ID:
-		indio_dev->num_channels = 3;
-		data->chip_info = &bme280_chip_info;
-		data->oversampling_press = ilog2(16);
-		data->oversampling_humid = ilog2(16);
-		data->oversampling_temp = ilog2(2);
-		data->start_up_time = 2000;
+		chip_info = &bme280_chip_info;
+		break;
+	case BMP380_CHIP_ID:
+		chip_info = &bmp380_chip_info;
 		break;
 	default:
 		return -EINVAL;
 	}
+	data->chip_info = chip_info;
+
+	/* Apply initial values from chip info structure */
+	indio_dev->channels = chip_info->channels;
+	indio_dev->num_channels = chip_info->num_channels;
+	data->oversampling_press = chip_info->oversampling_press_default;
+	data->oversampling_humid = chip_info->oversampling_humid_default;
+	data->oversampling_temp = chip_info->oversampling_temp_default;
+	data->iir_filter_coeff = chip_info->iir_filter_coeff_default;
+	data->sampling_freq = chip_info->sampling_freq_default;
+	data->start_up_time = chip_info->start_up_time;
 
 	/* Bring up regulators */
 	regulator_bulk_set_supply_names(data->supplies,
@@ -1071,7 +1747,8 @@ int bmp280_common_probe(struct device *dev,
 	}
 
 	data->regmap = regmap;
-	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
+
+	ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
 	if (ret < 0)
 		return ret;
 	if (chip_id != chip) {
@@ -1080,6 +1757,13 @@ int bmp280_common_probe(struct device *dev,
 		return -EINVAL;
 	}
 
+	/* BMP3xx requires soft-reset as part of initialization */
+	if (chip_id == BMP380_CHIP_ID) {
+		ret = bmp380_cmd(data, BMP380_CMD_SOFT_RESET);
+		if (ret < 0)
+			return ret;
+	}
+
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
 		return ret;
@@ -1091,21 +1775,11 @@ int bmp280_common_probe(struct device *dev,
 	 * non-volatile memory during production". Let's read them out at probe
 	 * time once. They will not change.
 	 */
-	if (chip_id  == BMP180_CHIP_ID) {
-		ret = bmp180_read_calib(data, &data->calib.bmp180);
-		if (ret < 0) {
-			dev_err(data->dev,
-				"failed to read calibration coefficients\n");
-			return ret;
-		}
-	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
-		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
-		if (ret < 0) {
-			dev_err(data->dev,
-				"failed to read calibration coefficients\n");
-			return ret;
-		}
-	}
+
+	ret = data->chip_info->read_calib(data);
+	if (ret < 0)
+		return dev_err_probe(data->dev, ret,
+				     "failed to read calibration coefficients\n");
 
 	/*
 	 * Attempt to grab an optional EOC IRQ - only the BMP085 has this
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index bf4a7a617537..0c27211f3ea0 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -19,6 +19,9 @@ static int bmp280_i2c_probe(struct i2c_client *client,
 	case BME280_CHIP_ID:
 		regmap_config = &bmp280_regmap_config;
 		break;
+	case BMP380_CHIP_ID:
+		regmap_config = &bmp380_regmap_config;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -37,19 +40,21 @@ static int bmp280_i2c_probe(struct i2c_client *client,
 }
 
 static const struct of_device_id bmp280_of_i2c_match[] = {
-	{ .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
-	{ .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
-	{ .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
 	{ .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID },
+	{ .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
+	{ .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
+	{ .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
+	{ .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
 
 static const struct i2c_device_id bmp280_i2c_id[] = {
-	{"bmp280", BMP280_CHIP_ID },
-	{"bmp180", BMP180_CHIP_ID },
 	{"bmp085", BMP180_CHIP_ID },
+	{"bmp180", BMP180_CHIP_ID },
+	{"bmp280", BMP280_CHIP_ID },
 	{"bme280", BME280_CHIP_ID },
+	{"bmp380", BMP380_CHIP_ID },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id);
diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c
index 969698518984..c98c67970265 100644
--- a/drivers/iio/pressure/bmp280-regmap.c
+++ b/drivers/iio/pressure/bmp280-regmap.c
@@ -72,6 +72,49 @@ static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg)
 	}
 }
 
+static bool bmp380_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BMP380_REG_CMD:
+	case BMP380_REG_CONFIG:
+	case BMP380_REG_FIFO_CONFIG_1:
+	case BMP380_REG_FIFO_CONFIG_2:
+	case BMP380_REG_FIFO_WATERMARK_LSB:
+	case BMP380_REG_FIFO_WATERMARK_MSB:
+	case BMP380_REG_POWER_CONTROL:
+	case BMP380_REG_INT_CONTROL:
+	case BMP380_REG_IF_CONFIG:
+	case BMP380_REG_ODR:
+	case BMP380_REG_OSR:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool bmp380_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BMP380_REG_TEMP_XLSB:
+	case BMP380_REG_TEMP_LSB:
+	case BMP380_REG_TEMP_MSB:
+	case BMP380_REG_PRESS_XLSB:
+	case BMP380_REG_PRESS_LSB:
+	case BMP380_REG_PRESS_MSB:
+	case BMP380_REG_SENSOR_TIME_XLSB:
+	case BMP380_REG_SENSOR_TIME_LSB:
+	case BMP380_REG_SENSOR_TIME_MSB:
+	case BMP380_REG_INT_STATUS:
+	case BMP380_REG_FIFO_DATA:
+	case BMP380_REG_STATUS:
+	case BMP380_REG_ERROR:
+	case BMP380_REG_EVENT:
+		return true;
+	default:
+		return false;
+	}
+}
+
 const struct regmap_config bmp280_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -83,3 +126,15 @@ const struct regmap_config bmp280_regmap_config = {
 	.volatile_reg = bmp280_is_volatile_reg,
 };
 EXPORT_SYMBOL_NS(bmp280_regmap_config, IIO_BMP280);
+
+const struct regmap_config bmp380_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BMP380_REG_CMD,
+	.cache_type = REGCACHE_RBTREE,
+
+	.writeable_reg = bmp380_is_writeable_reg,
+	.volatile_reg = bmp380_is_volatile_reg,
+};
+EXPORT_SYMBOL_NS(bmp380_regmap_config, IIO_BMP280);
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 4cfaf3e869b8..011c68e07ebf 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -66,6 +66,9 @@ static int bmp280_spi_probe(struct spi_device *spi)
 	case BME280_CHIP_ID:
 		regmap_config = &bmp280_regmap_config;
 		break;
+	case BMP380_CHIP_ID:
+		regmap_config = &bmp380_regmap_config;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -92,6 +95,7 @@ static const struct of_device_id bmp280_of_spi_match[] = {
 	{ .compatible = "bosch,bmp181", },
 	{ .compatible = "bosch,bmp280", },
 	{ .compatible = "bosch,bme280", },
+	{ .compatible = "bosch,bmp380", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
@@ -101,6 +105,7 @@ static const struct spi_device_id bmp280_spi_id[] = {
 	{ "bmp181", BMP180_CHIP_ID },
 	{ "bmp280", BMP280_CHIP_ID },
 	{ "bme280", BME280_CHIP_ID },
+	{ "bmp380", BMP380_CHIP_ID },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index 57ba0e85db91..c791325c7416 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -3,6 +3,87 @@
 #include <linux/device.h>
 #include <linux/regmap.h>
 
+/* BMP380 specific registers */
+#define BMP380_REG_CMD			0x7E
+#define BMP380_REG_CONFIG		0x1F
+#define BMP380_REG_ODR			0x1D
+#define BMP380_REG_OSR			0x1C
+#define BMP380_REG_POWER_CONTROL	0x1B
+#define BMP380_REG_IF_CONFIG		0x1A
+#define BMP380_REG_INT_CONTROL		0x19
+#define BMP380_REG_INT_STATUS		0x11
+#define BMP380_REG_EVENT		0x10
+#define BMP380_REG_STATUS		0x03
+#define BMP380_REG_ERROR		0x02
+#define BMP380_REG_ID			0x00
+
+#define BMP380_REG_FIFO_CONFIG_1	0x18
+#define BMP380_REG_FIFO_CONFIG_2	0x17
+#define BMP380_REG_FIFO_WATERMARK_MSB	0x16
+#define BMP380_REG_FIFO_WATERMARK_LSB	0x15
+#define BMP380_REG_FIFO_DATA		0x14
+#define BMP380_REG_FIFO_LENGTH_MSB	0x13
+#define BMP380_REG_FIFO_LENGTH_LSB	0x12
+
+#define BMP380_REG_SENSOR_TIME_MSB	0x0E
+#define BMP380_REG_SENSOR_TIME_LSB	0x0D
+#define BMP380_REG_SENSOR_TIME_XLSB	0x0C
+
+#define BMP380_REG_TEMP_MSB		0x09
+#define BMP380_REG_TEMP_LSB		0x08
+#define BMP380_REG_TEMP_XLSB		0x07
+
+#define BMP380_REG_PRESS_MSB		0x06
+#define BMP380_REG_PRESS_LSB		0x05
+#define BMP380_REG_PRESS_XLSB		0x04
+
+#define BMP380_REG_CALIB_TEMP_START	0x31
+#define BMP380_CALIB_REG_COUNT		21
+
+#define BMP380_FILTER_MASK		GENMASK(3, 1)
+#define BMP380_FILTER_OFF		0
+#define BMP380_FILTER_1X		1
+#define BMP380_FILTER_3X		2
+#define BMP380_FILTER_7X		3
+#define BMP380_FILTER_15X		4
+#define BMP380_FILTER_31X		5
+#define BMP380_FILTER_63X		6
+#define BMP380_FILTER_127X		7
+
+#define BMP380_OSRS_TEMP_MASK		GENMASK(5, 3)
+#define BMP380_OSRS_PRESS_MASK		GENMASK(2, 0)
+
+#define BMP380_ODRS_MASK		GENMASK(4, 0)
+
+#define BMP380_CTRL_SENSORS_MASK	GENMASK(1, 0)
+#define BMP380_CTRL_SENSORS_PRESS_EN	BIT(0)
+#define BMP380_CTRL_SENSORS_TEMP_EN	BIT(1)
+#define BMP380_MODE_MASK		GENMASK(5, 4)
+#define BMP380_MODE_SLEEP		0
+#define BMP380_MODE_FORCED		1
+#define BMP380_MODE_NORMAL		3
+
+#define BMP380_MIN_TEMP			-4000
+#define BMP380_MAX_TEMP			8500
+#define BMP380_MIN_PRES			3000000
+#define BMP380_MAX_PRES			12500000
+
+#define BMP380_CMD_NOOP			0x00
+#define BMP380_CMD_EXTMODE_EN_MID	0x34
+#define BMP380_CMD_FIFO_FLUSH		0xB0
+#define BMP380_CMD_SOFT_RESET		0xB6
+
+#define BMP380_STATUS_CMD_RDY_MASK	BIT(4)
+#define BMP380_STATUS_DRDY_PRESS_MASK	BIT(5)
+#define BMP380_STATUS_DRDY_TEMP_MASK	BIT(6)
+
+#define BMP380_ERR_FATAL_MASK		BIT(0)
+#define BMP380_ERR_CMD_MASK		BIT(1)
+#define BMP380_ERR_CONF_MASK		BIT(2)
+
+#define BMP380_TEMP_SKIPPED		0x800000
+#define BMP380_PRESS_SKIPPED		0x800000
+
 /* BMP280 specific registers */
 #define BMP280_REG_HUMIDITY_LSB		0xFE
 #define BMP280_REG_HUMIDITY_MSB		0xFD
@@ -13,6 +94,9 @@
 #define BMP280_REG_PRESS_LSB		0xF8
 #define BMP280_REG_PRESS_MSB		0xF7
 
+/* Helper mask to truncate excess 4 bits on pressure and temp readings */
+#define BMP280_MEAS_TRIM_MASK		GENMASK(24, 4)
+
 #define BMP280_REG_CONFIG		0xF5
 #define BMP280_REG_CTRL_MEAS		0xF4
 #define BMP280_REG_STATUS		0xF3
@@ -32,44 +116,46 @@
 #define BMP280_REG_COMP_PRESS_START	0x8E
 #define BMP280_COMP_PRESS_REG_COUNT	18
 
-#define BMP280_FILTER_MASK		(BIT(4) | BIT(3) | BIT(2))
+#define BMP280_COMP_H5_MASK		GENMASK(15, 4)
+
+#define BMP280_CONTIGUOUS_CALIB_REGS	(BMP280_COMP_TEMP_REG_COUNT + \
+					 BMP280_COMP_PRESS_REG_COUNT)
+
+#define BMP280_FILTER_MASK		GENMASK(4, 2)
 #define BMP280_FILTER_OFF		0
-#define BMP280_FILTER_2X		BIT(2)
-#define BMP280_FILTER_4X		BIT(3)
-#define BMP280_FILTER_8X		(BIT(3) | BIT(2))
-#define BMP280_FILTER_16X		BIT(4)
+#define BMP280_FILTER_2X		1
+#define BMP280_FILTER_4X		2
+#define BMP280_FILTER_8X		3
+#define BMP280_FILTER_16X		4
 
-#define BMP280_OSRS_HUMIDITY_MASK	(BIT(2) | BIT(1) | BIT(0))
-#define BMP280_OSRS_HUMIDITIY_X(osrs_h)	((osrs_h) << 0)
+#define BMP280_OSRS_HUMIDITY_MASK	GENMASK(2, 0)
 #define BMP280_OSRS_HUMIDITY_SKIP	0
-#define BMP280_OSRS_HUMIDITY_1X		BMP280_OSRS_HUMIDITIY_X(1)
-#define BMP280_OSRS_HUMIDITY_2X		BMP280_OSRS_HUMIDITIY_X(2)
-#define BMP280_OSRS_HUMIDITY_4X		BMP280_OSRS_HUMIDITIY_X(3)
-#define BMP280_OSRS_HUMIDITY_8X		BMP280_OSRS_HUMIDITIY_X(4)
-#define BMP280_OSRS_HUMIDITY_16X	BMP280_OSRS_HUMIDITIY_X(5)
+#define BMP280_OSRS_HUMIDITY_1X		1
+#define BMP280_OSRS_HUMIDITY_2X		2
+#define BMP280_OSRS_HUMIDITY_4X		3
+#define BMP280_OSRS_HUMIDITY_8X		4
+#define BMP280_OSRS_HUMIDITY_16X	5
 
-#define BMP280_OSRS_TEMP_MASK		(BIT(7) | BIT(6) | BIT(5))
+#define BMP280_OSRS_TEMP_MASK		GENMASK(7, 5)
 #define BMP280_OSRS_TEMP_SKIP		0
-#define BMP280_OSRS_TEMP_X(osrs_t)	((osrs_t) << 5)
-#define BMP280_OSRS_TEMP_1X		BMP280_OSRS_TEMP_X(1)
-#define BMP280_OSRS_TEMP_2X		BMP280_OSRS_TEMP_X(2)
-#define BMP280_OSRS_TEMP_4X		BMP280_OSRS_TEMP_X(3)
-#define BMP280_OSRS_TEMP_8X		BMP280_OSRS_TEMP_X(4)
-#define BMP280_OSRS_TEMP_16X		BMP280_OSRS_TEMP_X(5)
-
-#define BMP280_OSRS_PRESS_MASK		(BIT(4) | BIT(3) | BIT(2))
+#define BMP280_OSRS_TEMP_1X		1
+#define BMP280_OSRS_TEMP_2X		2
+#define BMP280_OSRS_TEMP_4X		3
+#define BMP280_OSRS_TEMP_8X		4
+#define BMP280_OSRS_TEMP_16X		5
+
+#define BMP280_OSRS_PRESS_MASK		GENMASK(4, 2)
 #define BMP280_OSRS_PRESS_SKIP		0
-#define BMP280_OSRS_PRESS_X(osrs_p)	((osrs_p) << 2)
-#define BMP280_OSRS_PRESS_1X		BMP280_OSRS_PRESS_X(1)
-#define BMP280_OSRS_PRESS_2X		BMP280_OSRS_PRESS_X(2)
-#define BMP280_OSRS_PRESS_4X		BMP280_OSRS_PRESS_X(3)
-#define BMP280_OSRS_PRESS_8X		BMP280_OSRS_PRESS_X(4)
-#define BMP280_OSRS_PRESS_16X		BMP280_OSRS_PRESS_X(5)
-
-#define BMP280_MODE_MASK		(BIT(1) | BIT(0))
+#define BMP280_OSRS_PRESS_1X		1
+#define BMP280_OSRS_PRESS_2X		2
+#define BMP280_OSRS_PRESS_4X		3
+#define BMP280_OSRS_PRESS_8X		4
+#define BMP280_OSRS_PRESS_16X		5
+
+#define BMP280_MODE_MASK		GENMASK(1, 0)
 #define BMP280_MODE_SLEEP		0
-#define BMP280_MODE_FORCED		BIT(0)
-#define BMP280_MODE_NORMAL		(BIT(1) | BIT(0))
+#define BMP280_MODE_FORCED		1
+#define BMP280_MODE_NORMAL		3
 
 /* BMP180 specific registers */
 #define BMP180_REG_OUT_XLSB		0xF8
@@ -79,19 +165,22 @@
 #define BMP180_REG_CALIB_START		0xAA
 #define BMP180_REG_CALIB_COUNT		22
 
+#define BMP180_MEAS_CTRL_MASK		GENMASK(4, 0)
+#define BMP180_MEAS_TEMP		0x0E
+#define BMP180_MEAS_PRESS		0x14
 #define BMP180_MEAS_SCO			BIT(5)
-#define BMP180_MEAS_TEMP		(0x0E | BMP180_MEAS_SCO)
-#define BMP180_MEAS_PRESS_X(oss)	((oss) << 6 | 0x14 | BMP180_MEAS_SCO)
-#define BMP180_MEAS_PRESS_1X		BMP180_MEAS_PRESS_X(0)
-#define BMP180_MEAS_PRESS_2X		BMP180_MEAS_PRESS_X(1)
-#define BMP180_MEAS_PRESS_4X		BMP180_MEAS_PRESS_X(2)
-#define BMP180_MEAS_PRESS_8X		BMP180_MEAS_PRESS_X(3)
+#define BMP180_OSRS_PRESS_MASK		GENMASK(7, 6)
+#define BMP180_MEAS_PRESS_1X		0
+#define BMP180_MEAS_PRESS_2X		1
+#define BMP180_MEAS_PRESS_4X		2
+#define BMP180_MEAS_PRESS_8X		3
 
 /* BMP180 and BMP280 common registers */
 #define BMP280_REG_CTRL_MEAS		0xF4
 #define BMP280_REG_RESET		0xE0
 #define BMP280_REG_ID			0xD0
 
+#define BMP380_CHIP_ID			0x50
 #define BMP180_CHIP_ID			0x55
 #define BMP280_CHIP_ID			0x58
 #define BME280_CHIP_ID			0x60
@@ -105,6 +194,7 @@
 /* Regmap configurations */
 extern const struct regmap_config bmp180_regmap_config;
 extern const struct regmap_config bmp280_regmap_config;
+extern const struct regmap_config bmp380_regmap_config;
 
 /* Probe called from different transports */
 int bmp280_common_probe(struct device *dev,
diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
index 5f6bb3603a8b..f0b0d198c6d4 100644
--- a/drivers/iio/pressure/dlhl60d.c
+++ b/drivers/iio/pressure/dlhl60d.c
@@ -129,9 +129,8 @@ static int dlh_read_direct(struct dlh_state *st,
 	if (ret)
 		return ret;
 
-	*pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
-	*temperature = get_unaligned_be32(&st->rx_buf[3]) &
-		GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
+	*pressure = get_unaligned_be24(&st->rx_buf[1]);
+	*temperature = get_unaligned_be24(&st->rx_buf[4]);
 
 	return 0;
 }
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index 36fb7ae0d0a9..984a3f511a1a 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -89,6 +89,7 @@ struct dps310_data {
 	s32 c00, c10, c20, c30, c01, c11, c21;
 	s32 pressure_raw;
 	s32 temp_raw;
+	bool timeout_recovery_failed;
 };
 
 static const struct iio_chan_spec dps310_channels[] = {
@@ -159,6 +160,102 @@ static int dps310_get_coefs(struct dps310_data *data)
 	return 0;
 }
 
+/*
+ * Some versions of the chip will read temperatures in the ~60C range when
+ * it's actually ~20C. This is the manufacturer recommended workaround
+ * to correct the issue. The registers used below are undocumented.
+ */
+static int dps310_temp_workaround(struct dps310_data *data)
+{
+	int rc;
+	int reg;
+
+	rc = regmap_read(data->regmap, 0x32, &reg);
+	if (rc)
+		return rc;
+
+	/*
+	 * If bit 1 is set then the device is okay, and the workaround does not
+	 * need to be applied
+	 */
+	if (reg & BIT(1))
+		return 0;
+
+	rc = regmap_write(data->regmap, 0x0e, 0xA5);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x0f, 0x96);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x62, 0x02);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x0e, 0x00);
+	if (rc)
+		return rc;
+
+	return regmap_write(data->regmap, 0x0f, 0x00);
+}
+
+static int dps310_startup(struct dps310_data *data)
+{
+	int rc;
+	int ready;
+
+	/*
+	 * Set up pressure sensor in single sample, one measurement per second
+	 * mode
+	 */
+	rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0);
+	if (rc)
+		return rc;
+
+	/*
+	 * Set up external (MEMS) temperature sensor in single sample, one
+	 * measurement per second mode
+	 */
+	rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
+	if (rc)
+		return rc;
+
+	/* Temp and pressure shifts are disabled when PRC <= 8 */
+	rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
+			       DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0);
+	if (rc)
+		return rc;
+
+	/* MEAS_CFG doesn't update correctly unless first written with 0 */
+	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+			       DPS310_MEAS_CTRL_BITS, 0);
+	if (rc)
+		return rc;
+
+	/* Turn on temperature and pressure measurement in the background */
+	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+			       DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN |
+			       DPS310_TEMP_EN | DPS310_BACKGROUND);
+	if (rc)
+		return rc;
+
+	/*
+	 * Calibration coefficients required for reporting temperature.
+	 * They are available 40ms after the device has started
+	 */
+	rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
+				      ready & DPS310_COEF_RDY, 10000, 40000);
+	if (rc)
+		return rc;
+
+	rc = dps310_get_coefs(data);
+	if (rc)
+		return rc;
+
+	return dps310_temp_workaround(data);
+}
+
 static int dps310_get_pres_precision(struct dps310_data *data)
 {
 	int rc;
@@ -297,11 +394,69 @@ static int dps310_get_temp_k(struct dps310_data *data)
 	return scale_factors[ilog2(rc)];
 }
 
+static int dps310_reset_wait(struct dps310_data *data)
+{
+	int rc;
+
+	rc = regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC);
+	if (rc)
+		return rc;
+
+	/* Wait for device chip access: 2.5ms in specification */
+	usleep_range(2500, 12000);
+	return 0;
+}
+
+static int dps310_reset_reinit(struct dps310_data *data)
+{
+	int rc;
+
+	rc = dps310_reset_wait(data);
+	if (rc)
+		return rc;
+
+	return dps310_startup(data);
+}
+
+static int dps310_ready_status(struct dps310_data *data, int ready_bit, int timeout)
+{
+	int sleep = DPS310_POLL_SLEEP_US(timeout);
+	int ready;
+
+	return regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, ready & ready_bit,
+					sleep, timeout);
+}
+
+static int dps310_ready(struct dps310_data *data, int ready_bit, int timeout)
+{
+	int rc;
+
+	rc = dps310_ready_status(data, ready_bit, timeout);
+	if (rc) {
+		if (rc == -ETIMEDOUT && !data->timeout_recovery_failed) {
+			/* Reset and reinitialize the chip. */
+			if (dps310_reset_reinit(data)) {
+				data->timeout_recovery_failed = true;
+			} else {
+				/* Try again to get sensor ready status. */
+				if (dps310_ready_status(data, ready_bit, timeout))
+					data->timeout_recovery_failed = true;
+				else
+					return 0;
+			}
+		}
+
+		return rc;
+	}
+
+	data->timeout_recovery_failed = false;
+	return 0;
+}
+
 static int dps310_read_pres_raw(struct dps310_data *data)
 {
 	int rc;
 	int rate;
-	int ready;
 	int timeout;
 	s32 raw;
 	u8 val[3];
@@ -313,9 +468,7 @@ static int dps310_read_pres_raw(struct dps310_data *data)
 	timeout = DPS310_POLL_TIMEOUT_US(rate);
 
 	/* Poll for sensor readiness; base the timeout upon the sample rate. */
-	rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
-				      ready & DPS310_PRS_RDY,
-				      DPS310_POLL_SLEEP_US(timeout), timeout);
+	rc = dps310_ready(data, DPS310_PRS_RDY, timeout);
 	if (rc)
 		goto done;
 
@@ -352,7 +505,6 @@ static int dps310_read_temp_raw(struct dps310_data *data)
 {
 	int rc;
 	int rate;
-	int ready;
 	int timeout;
 
 	if (mutex_lock_interruptible(&data->lock))
@@ -362,10 +514,8 @@ static int dps310_read_temp_raw(struct dps310_data *data)
 	timeout = DPS310_POLL_TIMEOUT_US(rate);
 
 	/* Poll for sensor readiness; base the timeout upon the sample rate. */
-	rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
-				      ready & DPS310_TMP_RDY,
-				      DPS310_POLL_SLEEP_US(timeout), timeout);
-	if (rc < 0)
+	rc = dps310_ready(data, DPS310_TMP_RDY, timeout);
+	if (rc)
 		goto done;
 
 	rc = dps310_read_temp_ready(data);
@@ -660,7 +810,7 @@ static void dps310_reset(void *action_data)
 {
 	struct dps310_data *data = action_data;
 
-	regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC);
+	dps310_reset_wait(data);
 }
 
 static const struct regmap_config dps310_regmap_config = {
@@ -677,52 +827,12 @@ static const struct iio_info dps310_info = {
 	.write_raw = dps310_write_raw,
 };
 
-/*
- * Some verions of chip will read temperatures in the ~60C range when
- * its actually ~20C. This is the manufacturer recommended workaround
- * to correct the issue. The registers used below are undocumented.
- */
-static int dps310_temp_workaround(struct dps310_data *data)
-{
-	int rc;
-	int reg;
-
-	rc = regmap_read(data->regmap, 0x32, &reg);
-	if (rc < 0)
-		return rc;
-
-	/*
-	 * If bit 1 is set then the device is okay, and the workaround does not
-	 * need to be applied
-	 */
-	if (reg & BIT(1))
-		return 0;
-
-	rc = regmap_write(data->regmap, 0x0e, 0xA5);
-	if (rc < 0)
-		return rc;
-
-	rc = regmap_write(data->regmap, 0x0f, 0x96);
-	if (rc < 0)
-		return rc;
-
-	rc = regmap_write(data->regmap, 0x62, 0x02);
-	if (rc < 0)
-		return rc;
-
-	rc = regmap_write(data->regmap, 0x0e, 0x00);
-	if (rc < 0)
-		return rc;
-
-	return regmap_write(data->regmap, 0x0f, 0x00);
-}
-
 static int dps310_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct dps310_data *data;
 	struct iio_dev *iio;
-	int rc, ready;
+	int rc;
 
 	iio = devm_iio_device_alloc(&client->dev,  sizeof(*data));
 	if (!iio)
@@ -747,54 +857,8 @@ static int dps310_probe(struct i2c_client *client,
 	if (rc)
 		return rc;
 
-	/*
-	 * Set up pressure sensor in single sample, one measurement per second
-	 * mode
-	 */
-	rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0);
-
-	/*
-	 * Set up external (MEMS) temperature sensor in single sample, one
-	 * measurement per second mode
-	 */
-	rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
-	if (rc < 0)
-		return rc;
-
-	/* Temp and pressure shifts are disabled when PRC <= 8 */
-	rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
-			       DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0);
-	if (rc < 0)
-		return rc;
-
-	/* MEAS_CFG doesn't update correctly unless first written with 0 */
-	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
-			       DPS310_MEAS_CTRL_BITS, 0);
-	if (rc < 0)
-		return rc;
-
-	/* Turn on temperature and pressure measurement in the background */
-	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
-			       DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN |
-			       DPS310_TEMP_EN | DPS310_BACKGROUND);
-	if (rc < 0)
-		return rc;
-
-	/*
-	 * Calibration coefficients required for reporting temperature.
-	 * They are available 40ms after the device has started
-	 */
-	rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
-				      ready & DPS310_COEF_RDY, 10000, 40000);
-	if (rc < 0)
-		return rc;
-
-	rc = dps310_get_coefs(data);
-	if (rc < 0)
-		return rc;
-
-	rc = dps310_temp_workaround(data);
-	if (rc < 0)
+	rc = dps310_startup(data);
+	if (rc)
 		return rc;
 
 	rc = devm_iio_device_register(&client->dev, iio);
diff --git a/drivers/iio/pressure/icp10100.c b/drivers/iio/pressure/icp10100.c
index af4621eaa6b5..b62f28585db5 100644
--- a/drivers/iio/pressure/icp10100.c
+++ b/drivers/iio/pressure/icp10100.c
@@ -595,7 +595,7 @@ static int icp10100_probe(struct i2c_client *client,
 	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
-static int __maybe_unused icp10100_suspend(struct device *dev)
+static int icp10100_suspend(struct device *dev)
 {
 	struct icp10100_state *st = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -607,7 +607,7 @@ static int __maybe_unused icp10100_suspend(struct device *dev)
 	return ret;
 }
 
-static int __maybe_unused icp10100_resume(struct device *dev)
+static int icp10100_resume(struct device *dev)
 {
 	struct icp10100_state *st = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -626,8 +626,8 @@ out_unlock:
 	return ret;
 }
 
-static UNIVERSAL_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume,
-			    NULL);
+static DEFINE_RUNTIME_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume,
+				 NULL);
 
 static const struct of_device_id icp10100_of_match[] = {
 	{
@@ -646,7 +646,7 @@ MODULE_DEVICE_TABLE(i2c, icp10100_id);
 static struct i2c_driver icp10100_driver = {
 	.driver = {
 		.name = "icp10100",
-		.pm = &icp10100_pm,
+		.pm = pm_ptr(&icp10100_pm),
 		.of_match_table = icp10100_of_match,
 	},
 	.probe = icp10100_probe,
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index 156e6a72dc5c..6e11bea784fa 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -22,6 +22,7 @@ enum st_press_type {
 	LPS33HW,
 	LPS35HW,
 	LPS22HH,
+	LPS22DF,
 	ST_PRESS_MAX,
 };
 
@@ -32,6 +33,7 @@ enum st_press_type {
 #define LPS33HW_PRESS_DEV_NAME		"lps33hw"
 #define LPS35HW_PRESS_DEV_NAME		"lps35hw"
 #define LPS22HH_PRESS_DEV_NAME		"lps22hh"
+#define LPS22DF_PRESS_DEV_NAME		"lps22df"
 
 /**
  * struct st_sensors_platform_data - default press platform data
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 76913a2028d2..80176e3083af 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -552,6 +552,76 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
+	{
+		/*
+		 * CUSTOM VALUES FOR LPS22DF SENSOR
+		 * See LPS22DF datasheet:
+		 * http://www.st.com/resource/en/datasheet/lps22df.pdf
+		 */
+		.wai = 0xb4,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LPS22DF_PRESS_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
+		.num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
+		.odr = {
+			.addr = 0x10,
+			.mask = 0x78,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01 },
+				{ .hz = 4, .value = 0x02 },
+				{ .hz = 10, .value = 0x03 },
+				{ .hz = 25, .value = 0x04 },
+				{ .hz = 50, .value = 0x05 },
+				{ .hz = 75, .value = 0x06 },
+				{ .hz = 100, .value = 0x07 },
+				{ .hz = 200, .value = 0x08 },
+			},
+		},
+		.pw = {
+			.addr = 0x10,
+			.mask = 0x78,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.fs_avl = {
+				/*
+				 * Pressure and temperature sensitivity values
+				 * as defined in table 2 of LPS22DF datasheet.
+				 */
+				[0] = {
+					.num = ST_PRESS_FS_AVL_1260MB,
+					.gain = ST_PRESS_KPASCAL_NANO_SCALE,
+					.gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS,
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x11,
+			.mask = BIT(3),
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x13,
+				.mask = BIT(5),
+				.addr_od = 0x12,
+				.mask_od = BIT(1),
+			},
+			.addr_ihl = 0x12,
+			.mask_ihl = BIT(3),
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x03,
+			},
+		},
+		.sim = {
+			.addr = 0x0E,
+			.value = BIT(5),
+		},
+		.multi_read_bit = false,
+		.bootime = 2,
+	},
 };
 
 static int st_press_write_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 7035777fd988..58fede861891 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -47,6 +47,10 @@ static const struct of_device_id st_press_of_match[] = {
 		.compatible = "st,lps22hh",
 		.data = LPS22HH_PRESS_DEV_NAME,
 	},
+	{
+		.compatible = "st,lps22df",
+		.data = LPS22DF_PRESS_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -67,6 +71,7 @@ static const struct i2c_device_id st_press_id_table[] = {
 	{ LPS33HW_PRESS_DEV_NAME, LPS33HW },
 	{ LPS35HW_PRESS_DEV_NAME, LPS35HW },
 	{ LPS22HH_PRESS_DEV_NAME, LPS22HH },
+	{ LPS22DF_PRESS_DEV_NAME, LPS22DF },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_press_id_table);
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index bfab8e7fb061..25cca5ad7c55 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -51,6 +51,10 @@ static const struct of_device_id st_press_of_match[] = {
 		.compatible = "st,lps22hh",
 		.data = LPS22HH_PRESS_DEV_NAME,
 	},
+	{
+		.compatible = "st,lps22df",
+		.data = LPS22DF_PRESS_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -97,6 +101,7 @@ static const struct spi_device_id st_press_id_table[] = {
 	{ LPS33HW_PRESS_DEV_NAME },
 	{ LPS35HW_PRESS_DEV_NAME },
 	{ LPS22HH_PRESS_DEV_NAME },
+	{ LPS22DF_PRESS_DEV_NAME },
 	{ "lps001wp-press" },
 	{ "lps25h-press", },
 	{ "lps331ap-press" },
diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c
index 05015351a34a..faf2f806ce80 100644
--- a/drivers/iio/proximity/srf04.c
+++ b/drivers/iio/proximity/srf04.c
@@ -359,7 +359,7 @@ static int srf04_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
+static int  srf04_pm_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = container_of(dev,
 						struct platform_device, dev);
@@ -371,7 +371,7 @@ static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
+static int srf04_pm_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = container_of(dev,
 						struct platform_device, dev);
@@ -385,8 +385,8 @@ static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops srf04_pm_ops = {
-	SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
-				srf04_pm_runtime_resume, NULL)
+	RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
+		       srf04_pm_runtime_resume, NULL)
 };
 
 static struct platform_driver srf04_driver = {
@@ -395,7 +395,7 @@ static struct platform_driver srf04_driver = {
 	.driver		= {
 		.name		= "srf04-gpio",
 		.of_match_table	= of_srf04_match,
-		.pm		= &srf04_pm_ops,
+		.pm		= pm_ptr(&srf04_pm_ops),
 	},
 };
 
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index ea7318b508ea..0e4747ccd3cf 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -965,7 +965,7 @@ static int sx9310_probe(struct i2c_client *client)
 	return sx_common_probe(client, &sx9310_chip_info, &sx9310_regmap_config);
 }
 
-static int __maybe_unused sx9310_suspend(struct device *dev)
+static int sx9310_suspend(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
 	u8 ctrl0;
@@ -991,7 +991,7 @@ out:
 	return ret;
 }
 
-static int __maybe_unused sx9310_resume(struct device *dev)
+static int sx9310_resume(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1013,7 +1013,7 @@ out:
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume);
 
 static const struct acpi_device_id sx9310_acpi_match[] = {
 	{ "STH9310", SX9310_WHOAMI_VALUE },
@@ -1041,7 +1041,7 @@ static struct i2c_driver sx9310_driver = {
 		.name	= "sx9310",
 		.acpi_match_table = sx9310_acpi_match,
 		.of_match_table = sx9310_of_match,
-		.pm = &sx9310_pm_ops,
+		.pm = pm_sleep_ptr(&sx9310_pm_ops),
 
 		/*
 		 * Lots of i2c transfers in probe + over 200 ms waiting in
diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
index edb5a2ce4e27..977cf17cec52 100644
--- a/drivers/iio/proximity/sx9324.c
+++ b/drivers/iio/proximity/sx9324.c
@@ -1073,7 +1073,7 @@ static int sx9324_probe(struct i2c_client *client)
 	return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config);
 }
 
-static int __maybe_unused sx9324_suspend(struct device *dev)
+static int sx9324_suspend(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
 	unsigned int regval;
@@ -1098,7 +1098,7 @@ out:
 	return ret;
 }
 
-static int __maybe_unused sx9324_resume(struct device *dev)
+static int sx9324_resume(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -1114,7 +1114,7 @@ static int __maybe_unused sx9324_resume(struct device *dev)
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume);
 
 static const struct acpi_device_id sx9324_acpi_match[] = {
 	{ "STH9324", SX9324_WHOAMI_VALUE },
@@ -1139,7 +1139,7 @@ static struct i2c_driver sx9324_driver = {
 		.name	= "sx9324",
 		.acpi_match_table = sx9324_acpi_match,
 		.of_match_table = sx9324_of_match,
-		.pm = &sx9324_pm_ops,
+		.pm = pm_sleep_ptr(&sx9324_pm_ops),
 
 		/*
 		 * Lots of i2c transfers in probe + over 200 ms waiting in
diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c
index d9a12e6be6ca..7fa2213d23ba 100644
--- a/drivers/iio/proximity/sx9360.c
+++ b/drivers/iio/proximity/sx9360.c
@@ -819,7 +819,7 @@ static int sx9360_probe(struct i2c_client *client)
 	return sx_common_probe(client, &sx9360_chip_info, &sx9360_regmap_config);
 }
 
-static int __maybe_unused sx9360_suspend(struct device *dev)
+static int sx9360_suspend(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
 	unsigned int regval;
@@ -844,7 +844,7 @@ out:
 	return ret;
 }
 
-static int __maybe_unused sx9360_resume(struct device *dev)
+static int sx9360_resume(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
@@ -861,7 +861,7 @@ static int __maybe_unused sx9360_resume(struct device *dev)
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume);
 
 static const struct acpi_device_id sx9360_acpi_match[] = {
 	{ "STH9360", SX9360_WHOAMI_VALUE },
@@ -886,7 +886,7 @@ static struct i2c_driver sx9360_driver = {
 		.name	= "sx9360",
 		.acpi_match_table = sx9360_acpi_match,
 		.of_match_table = sx9360_of_match,
-		.pm = &sx9360_pm_ops,
+		.pm = pm_sleep_ptr(&sx9360_pm_ops),
 
 		/*
 		 * Lots of i2c transfers in probe + over 200 ms waiting in
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index 0808bb865928..8eb0f962ed25 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -79,16 +79,15 @@ struct mlx90614_data {
 
 /* Bandwidth values for IIR filtering */
 static const int mlx90614_iir_values[] = {77, 31, 20, 15, 723, 153, 110, 86};
-static IIO_CONST_ATTR(in_temp_object_filter_low_pass_3db_frequency_available,
-		      "0.15 0.20 0.31 0.77 0.86 1.10 1.53 7.23");
-
-static struct attribute *mlx90614_attributes[] = {
-	&iio_const_attr_in_temp_object_filter_low_pass_3db_frequency_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group mlx90614_attr_group = {
-	.attrs = mlx90614_attributes,
+static const int mlx90614_freqs[][2] = {
+	{0, 150000},
+	{0, 200000},
+	{0, 310000},
+	{0, 770000},
+	{0, 860000},
+	{1, 100000},
+	{1, 530000},
+	{7, 230000}
 };
 
 /*
@@ -373,6 +372,22 @@ static int mlx90614_write_raw_get_fmt(struct iio_dev *indio_dev,
 	}
 }
 
+static int mlx90614_read_avail(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length,
+			       long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		*vals = (int *)mlx90614_freqs;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = 2 * ARRAY_SIZE(mlx90614_freqs);
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
 static const struct iio_chan_spec mlx90614_channels[] = {
 	{
 		.type = IIO_TEMP,
@@ -389,6 +404,8 @@ static const struct iio_chan_spec mlx90614_channels[] = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 		    BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) |
 			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		.info_mask_separate_available =
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		    BIT(IIO_CHAN_INFO_SCALE),
 	},
@@ -401,6 +418,8 @@ static const struct iio_chan_spec mlx90614_channels[] = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 		    BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) |
 			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		.info_mask_separate_available =
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		    BIT(IIO_CHAN_INFO_SCALE),
 	},
@@ -410,7 +429,7 @@ static const struct iio_info mlx90614_info = {
 	.read_raw = mlx90614_read_raw,
 	.write_raw = mlx90614_write_raw,
 	.write_raw_get_fmt = mlx90614_write_raw_get_fmt,
-	.attrs = &mlx90614_attr_group,
+	.read_avail = mlx90614_read_avail,
 };
 
 #ifdef CONFIG_PM
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index e8ef47147e2b..f6dec0e5f097 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -18,6 +18,7 @@
 #include <linux/math64.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -128,6 +129,7 @@
  *        calculations
  * @object_ambient_temperature: Ambient temperature at object (might differ of
  *                              the ambient temperature of sensor.
+ * @regulator: Regulator of the device
  */
 struct mlx90632_data {
 	struct i2c_client *client;
@@ -136,6 +138,7 @@ struct mlx90632_data {
 	u16 emissivity;
 	u8 mtyp;
 	u32 object_ambient_temperature;
+	struct regulator *regulator;
 };
 
 static const struct regmap_range mlx90632_volatile_reg_range[] = {
@@ -208,6 +211,15 @@ static s32 mlx90632_pwr_continuous(struct regmap *regmap)
 }
 
 /**
+ * mlx90632_reset_delay() - Give the mlx90632 some time to reset properly
+ * If this is not done, the following I2C command(s) will not be accepted.
+ */
+static void mlx90632_reset_delay(void)
+{
+	usleep_range(150, 200);
+}
+
+/**
  * mlx90632_perform_measurement() - Trigger and retrieve current measurement cycle
  * @data: pointer to mlx90632_data object containing regmap information
  *
@@ -248,11 +260,7 @@ static int mlx90632_set_meas_type(struct regmap *regmap, u8 type)
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Give the mlx90632 some time to reset properly before sending a new I2C command
-	 * if this is not done, the following I2C command(s) will not be accepted.
-	 */
-	usleep_range(150, 200);
+	mlx90632_reset_delay();
 
 	ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL,
 				 (MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK),
@@ -841,6 +849,32 @@ static int mlx90632_wakeup(struct mlx90632_data *data)
 	return mlx90632_pwr_continuous(data->regmap);
 }
 
+static void mlx90632_disable_regulator(void *_data)
+{
+	struct mlx90632_data *data = _data;
+	int ret;
+
+	ret = regulator_disable(data->regulator);
+	if (ret < 0)
+		dev_err(regmap_get_device(data->regmap),
+			"Failed to disable power regulator: %d\n", ret);
+}
+
+static int mlx90632_enable_regulator(struct mlx90632_data *data)
+{
+	int ret;
+
+	ret = regulator_enable(data->regulator);
+	if (ret < 0) {
+		dev_err(regmap_get_device(data->regmap), "Failed to enable power regulator!\n");
+		return ret;
+	}
+
+	mlx90632_reset_delay();
+
+	return ret;
+}
+
 static int mlx90632_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
@@ -876,6 +910,23 @@ static int mlx90632_probe(struct i2c_client *client,
 	indio_dev->channels = mlx90632_channels;
 	indio_dev->num_channels = ARRAY_SIZE(mlx90632_channels);
 
+	mlx90632->regulator = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(mlx90632->regulator))
+		return dev_err_probe(&client->dev, PTR_ERR(mlx90632->regulator),
+				     "failed to get vdd regulator");
+
+	ret = mlx90632_enable_regulator(mlx90632);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&client->dev, mlx90632_disable_regulator,
+				       mlx90632);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to setup regulator cleanup action %d\n",
+			ret);
+		return ret;
+	}
+
 	ret = mlx90632_wakeup(mlx90632);
 	if (ret < 0) {
 		dev_err(&client->dev, "Wakeup failed: %d\n", ret);
diff --git a/drivers/iio/test/iio-test-rescale.c b/drivers/iio/test/iio-test-rescale.c
index cc782ccff880..31ee55a6faed 100644
--- a/drivers/iio/test/iio-test-rescale.c
+++ b/drivers/iio/test/iio-test-rescale.c
@@ -29,7 +29,7 @@ struct rescale_tc_data {
 	const char *expected_off;
 };
 
-const struct rescale_tc_data scale_cases[] = {
+static const struct rescale_tc_data scale_cases[] = {
 	/*
 	 * Typical use cases
 	 */
@@ -477,7 +477,7 @@ const struct rescale_tc_data scale_cases[] = {
 	},
 };
 
-const struct rescale_tc_data offset_cases[] = {
+static const struct rescale_tc_data offset_cases[] = {
 	/*
 	 * Typical use cases
 	 */
author	Linus Torvalds <torvalds@linux-foundation.org>	2022-10-08 08:56:37 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2022-10-08 08:56:37 -0700
commit	a09476668e3016ea4a7b0a7ebd02f44e0546c12c (patch)
tree	0a2e435d40b1785bc3df0c455fbf858adc28d36c /drivers/iio
parent	e8bc52cb8df80c31c73c726ab58ea9746e9ff734 (diff)
parent	7cd04013fbf3e6dcb67ca6b59aa813269a2ad9ce (diff)
download	linux-stable-a09476668e3016ea4a7b0a7ebd02f44e0546c12c.tar.gz linux-stable-a09476668e3016ea4a7b0a7ebd02f44e0546c12c.tar.bz2 linux-stable-a09476668e3016ea4a7b0a7ebd02f44e0546c12c.zip