diff options
author | Dudley Du <dudl@cypress.com> | 2015-01-17 18:35:26 -0800 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2015-01-18 00:10:28 -0800 |
commit | 9f1cd857518f29e1cb77c56c32354775994b27a6 (patch) | |
tree | 8ba58c31a7eafc50333a030eefda5dedf8e8ae5b /drivers/input/mouse/cyapa.c | |
parent | 9923d858cb0c8cfa49dda4a9a3422691b5911167 (diff) | |
download | linux-stable-9f1cd857518f29e1cb77c56c32354775994b27a6.tar.gz linux-stable-9f1cd857518f29e1cb77c56c32354775994b27a6.tar.bz2 linux-stable-9f1cd857518f29e1cb77c56c32354775994b27a6.zip |
Input: cyapa - re-design driver to support multi-trackpad in one driver
In order to support multiple different chipsets and communication protocols
trackpad devices in one cyapa driver, the new cyapa driver is re-designed
with one cyapa driver core and multiple device specific functions component.
The cyapa driver core is contained in this patch, it supplies basic functions
that working with kernel and input subsystem, and also supplies the interfaces
that the specific devices' component can connect and work together with as
one driver.
Signed-off-by: Dudley Du <dudl@cypress.com>
Tested-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'drivers/input/mouse/cyapa.c')
-rw-r--r-- | drivers/input/mouse/cyapa.c | 1076 |
1 files changed, 411 insertions, 665 deletions
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c index 1bece8cad46f..36c64335662c 100644 --- a/drivers/input/mouse/cyapa.c +++ b/drivers/input/mouse/cyapa.c @@ -20,408 +20,127 @@ #include <linux/input/mt.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/slab.h> +#include <linux/uaccess.h> +#include "cyapa.h" -/* APA trackpad firmware generation */ -#define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */ - -#define CYAPA_NAME "Cypress APA Trackpad (cyapa)" - -/* commands for read/write registers of Cypress trackpad */ -#define CYAPA_CMD_SOFT_RESET 0x00 -#define CYAPA_CMD_POWER_MODE 0x01 -#define CYAPA_CMD_DEV_STATUS 0x02 -#define CYAPA_CMD_GROUP_DATA 0x03 -#define CYAPA_CMD_GROUP_CMD 0x04 -#define CYAPA_CMD_GROUP_QUERY 0x05 -#define CYAPA_CMD_BL_STATUS 0x06 -#define CYAPA_CMD_BL_HEAD 0x07 -#define CYAPA_CMD_BL_CMD 0x08 -#define CYAPA_CMD_BL_DATA 0x09 -#define CYAPA_CMD_BL_ALL 0x0a -#define CYAPA_CMD_BLK_PRODUCT_ID 0x0b -#define CYAPA_CMD_BLK_HEAD 0x0c - -/* report data start reg offset address. */ -#define DATA_REG_START_OFFSET 0x0000 - -#define BL_HEAD_OFFSET 0x00 -#define BL_DATA_OFFSET 0x10 - -/* - * Operational Device Status Register - * - * bit 7: Valid interrupt source - * bit 6 - 4: Reserved - * bit 3 - 2: Power status - * bit 1 - 0: Device status - */ -#define REG_OP_STATUS 0x00 -#define OP_STATUS_SRC 0x80 -#define OP_STATUS_POWER 0x0c -#define OP_STATUS_DEV 0x03 -#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV) - -/* - * Operational Finger Count/Button Flags Register - * - * bit 7 - 4: Number of touched finger - * bit 3: Valid data - * bit 2: Middle Physical Button - * bit 1: Right Physical Button - * bit 0: Left physical Button - */ -#define REG_OP_DATA1 0x01 -#define OP_DATA_VALID 0x08 -#define OP_DATA_MIDDLE_BTN 0x04 -#define OP_DATA_RIGHT_BTN 0x02 -#define OP_DATA_LEFT_BTN 0x01 -#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \ - OP_DATA_LEFT_BTN) - -/* - * Bootloader Status Register - * - * bit 7: Busy - * bit 6 - 5: Reserved - * bit 4: Bootloader running - * bit 3 - 1: Reserved - * bit 0: Checksum valid - */ -#define REG_BL_STATUS 0x01 -#define BL_STATUS_BUSY 0x80 -#define BL_STATUS_RUNNING 0x10 -#define BL_STATUS_DATA_VALID 0x08 -#define BL_STATUS_CSUM_VALID 0x01 - -/* - * Bootloader Error Register - * - * bit 7: Invalid - * bit 6: Invalid security key - * bit 5: Bootloading - * bit 4: Command checksum - * bit 3: Flash protection error - * bit 2: Flash checksum error - * bit 1 - 0: Reserved - */ -#define REG_BL_ERROR 0x02 -#define BL_ERROR_INVALID 0x80 -#define BL_ERROR_INVALID_KEY 0x40 -#define BL_ERROR_BOOTLOADING 0x20 -#define BL_ERROR_CMD_CSUM 0x10 -#define BL_ERROR_FLASH_PROT 0x08 -#define BL_ERROR_FLASH_CSUM 0x04 - -#define BL_STATUS_SIZE 3 /* length of bootloader status registers */ -#define BLK_HEAD_BYTES 32 - -#define PRODUCT_ID_SIZE 16 -#define QUERY_DATA_SIZE 27 -#define REG_PROTOCOL_GEN_QUERY_OFFSET 20 - -#define REG_OFFSET_DATA_BASE 0x0000 -#define REG_OFFSET_COMMAND_BASE 0x0028 -#define REG_OFFSET_QUERY_BASE 0x002a - -#define CAPABILITY_LEFT_BTN_MASK (0x01 << 3) -#define CAPABILITY_RIGHT_BTN_MASK (0x01 << 4) -#define CAPABILITY_MIDDLE_BTN_MASK (0x01 << 5) -#define CAPABILITY_BTN_MASK (CAPABILITY_LEFT_BTN_MASK | \ - CAPABILITY_RIGHT_BTN_MASK | \ - CAPABILITY_MIDDLE_BTN_MASK) - -#define CYAPA_OFFSET_SOFT_RESET REG_OFFSET_COMMAND_BASE - -#define REG_OFFSET_POWER_MODE (REG_OFFSET_COMMAND_BASE + 1) - -#define PWR_MODE_MASK 0xfc -#define PWR_MODE_FULL_ACTIVE (0x3f << 2) -#define PWR_MODE_IDLE (0x05 << 2) /* default sleep time is 50 ms. */ -#define PWR_MODE_OFF (0x00 << 2) - -#define PWR_STATUS_MASK 0x0c -#define PWR_STATUS_ACTIVE (0x03 << 2) -#define PWR_STATUS_IDLE (0x02 << 2) -#define PWR_STATUS_OFF (0x00 << 2) - -/* - * CYAPA trackpad device states. - * Used in register 0x00, bit1-0, DeviceStatus field. - * Other values indicate device is in an abnormal state and must be reset. - */ -#define CYAPA_DEV_NORMAL 0x03 -#define CYAPA_DEV_BUSY 0x01 - -enum cyapa_state { - CYAPA_STATE_OP, - CYAPA_STATE_BL_IDLE, - CYAPA_STATE_BL_ACTIVE, - CYAPA_STATE_BL_BUSY, - CYAPA_STATE_NO_DEVICE, -}; - - -struct cyapa_touch { - /* - * high bits or x/y position value - * bit 7 - 4: high 4 bits of x position value - * bit 3 - 0: high 4 bits of y position value - */ - u8 xy_hi; - u8 x_lo; /* low 8 bits of x position value. */ - u8 y_lo; /* low 8 bits of y position value. */ - u8 pressure; - /* id range is 1 - 15. It is incremented with every new touch. */ - u8 id; -} __packed; - -/* The touch.id is used as the MT slot id, thus max MT slot is 15 */ -#define CYAPA_MAX_MT_SLOTS 15 - -struct cyapa_reg_data { - /* - * bit 0 - 1: device status - * bit 3 - 2: power mode - * bit 6 - 4: reserved - * bit 7: interrupt valid bit - */ - u8 device_status; - /* - * bit 7 - 4: number of fingers currently touching pad - * bit 3: valid data check bit - * bit 2: middle mechanism button state if exists - * bit 1: right mechanism button state if exists - * bit 0: left mechanism button state if exists - */ - u8 finger_btn; - /* CYAPA reports up to 5 touches per packet. */ - struct cyapa_touch touches[5]; -} __packed; - -/* The main device structure */ -struct cyapa { - enum cyapa_state state; - - struct i2c_client *client; - struct input_dev *input; - char phys[32]; /* device physical location */ - bool irq_wake; /* irq wake is enabled */ - bool smbus; - - /* read from query data region. */ - char product_id[16]; - u8 btn_capability; - u8 gen; - int max_abs_x; - int max_abs_y; - int physical_size_x; - int physical_size_y; -}; - -static const u8 bl_deactivate[] = { 0x00, 0xff, 0x3b, 0x00, 0x01, 0x02, 0x03, - 0x04, 0x05, 0x06, 0x07 }; -static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04, - 0x05, 0x06, 0x07 }; - -struct cyapa_cmd_len { - u8 cmd; - u8 len; -}; #define CYAPA_ADAPTER_FUNC_NONE 0 #define CYAPA_ADAPTER_FUNC_I2C 1 #define CYAPA_ADAPTER_FUNC_SMBUS 2 #define CYAPA_ADAPTER_FUNC_BOTH 3 -/* - * macros for SMBus communication - */ -#define SMBUS_READ 0x01 -#define SMBUS_WRITE 0x00 -#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1)) -#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01)) -#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80 -#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40 - - /* for byte read/write command */ -#define CMD_RESET 0 -#define CMD_POWER_MODE 1 -#define CMD_DEV_STATUS 2 -#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1) -#define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET) -#define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE) -#define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS) - - /* for group registers read/write command */ -#define REG_GROUP_DATA 0 -#define REG_GROUP_CMD 2 -#define REG_GROUP_QUERY 3 -#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3)) -#define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA) -#define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD) -#define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY) - - /* for register block read/write command */ -#define CMD_BL_STATUS 0 -#define CMD_BL_HEAD 1 -#define CMD_BL_CMD 2 -#define CMD_BL_DATA 3 -#define CMD_BL_ALL 4 -#define CMD_BLK_PRODUCT_ID 5 -#define CMD_BLK_HEAD 6 -#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1)) - -/* register block read/write command in bootloader mode */ -#define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS) -#define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD) -#define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD) -#define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA) -#define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL) - -/* register block read/write command in operational mode */ -#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID) -#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD) - -static const struct cyapa_cmd_len cyapa_i2c_cmds[] = { - { CYAPA_OFFSET_SOFT_RESET, 1 }, - { REG_OFFSET_COMMAND_BASE + 1, 1 }, - { REG_OFFSET_DATA_BASE, 1 }, - { REG_OFFSET_DATA_BASE, sizeof(struct cyapa_reg_data) }, - { REG_OFFSET_COMMAND_BASE, 0 }, - { REG_OFFSET_QUERY_BASE, QUERY_DATA_SIZE }, - { BL_HEAD_OFFSET, 3 }, - { BL_HEAD_OFFSET, 16 }, - { BL_HEAD_OFFSET, 16 }, - { BL_DATA_OFFSET, 16 }, - { BL_HEAD_OFFSET, 32 }, - { REG_OFFSET_QUERY_BASE, PRODUCT_ID_SIZE }, - { REG_OFFSET_DATA_BASE, 32 } -}; +const char product_id[] = "CYTRA"; -static const struct cyapa_cmd_len cyapa_smbus_cmds[] = { - { CYAPA_SMBUS_RESET, 1 }, - { CYAPA_SMBUS_POWER_MODE, 1 }, - { CYAPA_SMBUS_DEV_STATUS, 1 }, - { CYAPA_SMBUS_GROUP_DATA, sizeof(struct cyapa_reg_data) }, - { CYAPA_SMBUS_GROUP_CMD, 2 }, - { CYAPA_SMBUS_GROUP_QUERY, QUERY_DATA_SIZE }, - { CYAPA_SMBUS_BL_STATUS, 3 }, - { CYAPA_SMBUS_BL_HEAD, 16 }, - { CYAPA_SMBUS_BL_CMD, 16 }, - { CYAPA_SMBUS_BL_DATA, 16 }, - { CYAPA_SMBUS_BL_ALL, 32 }, - { CYAPA_SMBUS_BLK_PRODUCT_ID, PRODUCT_ID_SIZE }, - { CYAPA_SMBUS_BLK_HEAD, 16 }, -}; +static int cyapa_reinitialize(struct cyapa *cyapa); -static ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len, - u8 *values) +static inline bool cyapa_is_bootloader_mode(struct cyapa *cyapa) { - return i2c_smbus_read_i2c_block_data(cyapa->client, reg, len, values); + if (cyapa->gen == CYAPA_GEN5 && cyapa->state == CYAPA_STATE_GEN5_BL) + return true; + + if (cyapa->gen == CYAPA_GEN3 && + cyapa->state >= CYAPA_STATE_BL_BUSY && + cyapa->state <= CYAPA_STATE_BL_ACTIVE) + return true; + + return false; } -static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg, - size_t len, const u8 *values) +static inline bool cyapa_is_operational_mode(struct cyapa *cyapa) { - return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values); + if (cyapa->gen == CYAPA_GEN5 && cyapa->state == CYAPA_STATE_GEN5_APP) + return true; + + if (cyapa->gen == CYAPA_GEN3 && cyapa->state == CYAPA_STATE_OP) + return true; + + return false; } -/* - * cyapa_smbus_read_block - perform smbus block read command - * @cyapa - private data structure of the driver - * @cmd - the properly encoded smbus command - * @len - expected length of smbus command result - * @values - buffer to store smbus command result - * - * Returns negative errno, else the number of bytes written. - * - * Note: - * In trackpad device, the memory block allocated for I2C register map - * is 256 bytes, so the max read block for I2C bus is 256 bytes. - */ -static ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len, - u8 *values) +/* Returns 0 on success, else negative errno on failure. */ +static ssize_t cyapa_i2c_read(struct cyapa *cyapa, u8 reg, size_t len, + u8 *values) { - ssize_t ret; - u8 index; - u8 smbus_cmd; - u8 *buf; struct i2c_client *client = cyapa->client; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = values, + }, + }; + int ret; - if (!(SMBUS_BYTE_BLOCK_CMD_MASK & cmd)) - return -EINVAL; - - if (SMBUS_GROUP_BLOCK_CMD_MASK & cmd) { - /* read specific block registers command. */ - smbus_cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ); - ret = i2c_smbus_read_block_data(client, smbus_cmd, values); - goto out; - } + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - ret = 0; - for (index = 0; index * I2C_SMBUS_BLOCK_MAX < len; index++) { - smbus_cmd = SMBUS_ENCODE_IDX(cmd, index); - smbus_cmd = SMBUS_ENCODE_RW(smbus_cmd, SMBUS_READ); - buf = values + I2C_SMBUS_BLOCK_MAX * index; - ret = i2c_smbus_read_block_data(client, smbus_cmd, buf); - if (ret < 0) - goto out; - } + if (ret != ARRAY_SIZE(msgs)) + return ret < 0 ? ret : -EIO; -out: - return ret > 0 ? len : ret; + return 0; } -static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx) +/** + * cyapa_i2c_write - Execute i2c block data write operation + * @cyapa: Handle to this driver + * @ret: Offset of the data to written in the register map + * @len: number of bytes to write + * @values: Data to be written + * + * Return negative errno code on error; return zero when success. + */ +static int cyapa_i2c_write(struct cyapa *cyapa, u8 reg, + size_t len, const void *values) { - u8 cmd; + struct i2c_client *client = cyapa->client; + char buf[32]; + int ret; - if (cyapa->smbus) { - cmd = cyapa_smbus_cmds[cmd_idx].cmd; - cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ); - } else { - cmd = cyapa_i2c_cmds[cmd_idx].cmd; - } - return i2c_smbus_read_byte_data(cyapa->client, cmd); -} + if (len > sizeof(buf) - 1) + return -ENOMEM; -static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value) -{ - u8 cmd; + buf[0] = reg; + memcpy(&buf[1], values, len); - if (cyapa->smbus) { - cmd = cyapa_smbus_cmds[cmd_idx].cmd; - cmd = SMBUS_ENCODE_RW(cmd, SMBUS_WRITE); - } else { - cmd = cyapa_i2c_cmds[cmd_idx].cmd; - } - return i2c_smbus_write_byte_data(cyapa->client, cmd, value); + ret = i2c_master_send(client, buf, len + 1); + if (ret != len + 1) + return ret < 0 ? ret : -EIO; + + return 0; } -static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values) +static u8 cyapa_check_adapter_functionality(struct i2c_client *client) { - u8 cmd; - size_t len; + u8 ret = CYAPA_ADAPTER_FUNC_NONE; - if (cyapa->smbus) { - cmd = cyapa_smbus_cmds[cmd_idx].cmd; - len = cyapa_smbus_cmds[cmd_idx].len; - return cyapa_smbus_read_block(cyapa, cmd, len, values); - } else { - cmd = cyapa_i2c_cmds[cmd_idx].cmd; - len = cyapa_i2c_cmds[cmd_idx].len; - return cyapa_i2c_reg_read_block(cyapa, cmd, len, values); - } + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + ret |= CYAPA_ADAPTER_FUNC_I2C; + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) + ret |= CYAPA_ADAPTER_FUNC_SMBUS; + return ret; } /* * Query device for its current operating state. - * */ static int cyapa_get_state(struct cyapa *cyapa) { u8 status[BL_STATUS_SIZE]; + u8 cmd[32]; + /* The i2c address of gen4 and gen5 trackpad device must be even. */ + bool even_addr = ((cyapa->client->addr & 0x0001) == 0); + bool smbus = false; + int retries = 2; int error; cyapa->state = CYAPA_STATE_NO_DEVICE; @@ -433,39 +152,66 @@ static int cyapa_get_state(struct cyapa *cyapa) * */ error = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE, - status); + status); /* * On smbus systems in OP mode, the i2c_reg_read will fail with * -ETIMEDOUT. In this case, try again using the smbus equivalent * command. This should return a BL_HEAD indicating CYAPA_STATE_OP. */ - if (cyapa->smbus && (error == -ETIMEDOUT || error == -ENXIO)) - error = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status); + if (cyapa->smbus && (error == -ETIMEDOUT || error == -ENXIO)) { + if (!even_addr) + error = cyapa_read_block(cyapa, + CYAPA_CMD_BL_STATUS, status); + smbus = true; + } if (error != BL_STATUS_SIZE) goto error; - if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) { - switch (status[REG_OP_STATUS] & OP_STATUS_DEV) { - case CYAPA_DEV_NORMAL: - case CYAPA_DEV_BUSY: - cyapa->state = CYAPA_STATE_OP; - break; - default: - error = -EAGAIN; - goto error; + /* + * Detect trackpad protocol based on characteristic registers and bits. + */ + do { + cyapa->status[REG_OP_STATUS] = status[REG_OP_STATUS]; + cyapa->status[REG_BL_STATUS] = status[REG_BL_STATUS]; + cyapa->status[REG_BL_ERROR] = status[REG_BL_ERROR]; + + if (cyapa->gen == CYAPA_GEN_UNKNOWN || + cyapa->gen == CYAPA_GEN3) { + error = cyapa_gen3_ops.state_parse(cyapa, + status, BL_STATUS_SIZE); + if (!error) + goto out_detected; } - } else { - if (status[REG_BL_STATUS] & BL_STATUS_BUSY) - cyapa->state = CYAPA_STATE_BL_BUSY; - else if (status[REG_BL_ERROR] & BL_ERROR_BOOTLOADING) - cyapa->state = CYAPA_STATE_BL_ACTIVE; - else - cyapa->state = CYAPA_STATE_BL_IDLE; - } + /* + * Write 0x00 0x00 to trackpad device to force update its + * status, then redo the detection again. + */ + if (!smbus) { + cmd[0] = 0x00; + cmd[1] = 0x00; + error = cyapa_i2c_write(cyapa, 0, 2, cmd); + if (error) + goto error; + + msleep(50); + + error = cyapa_i2c_read(cyapa, BL_HEAD_OFFSET, + BL_STATUS_SIZE, status); + if (error) + goto error; + } + } while (--retries > 0 && !smbus); + + goto error; + +out_detected: + if (cyapa->state <= CYAPA_STATE_BL_BUSY) + return -EAGAIN; return 0; + error: return (error < 0) ? error : -EAGAIN; } @@ -482,143 +228,23 @@ error: * Returns: * 0 when the device eventually responds with a valid non-busy state. * -ETIMEDOUT if device never responds (too many -EAGAIN) - * < 0 other errors + * -EAGAIN if bootload is busy, or unknown state. + * < 0 other errors */ -static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout) +int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout) { int error; int tries = timeout / 100; - error = cyapa_get_state(cyapa); - while ((error || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) { - msleep(100); + do { error = cyapa_get_state(cyapa); - } - return (error == -EAGAIN || error == -ETIMEDOUT) ? -ETIMEDOUT : error; -} + if (!error && cyapa->state > CYAPA_STATE_BL_BUSY) + return 0; -static int cyapa_bl_deactivate(struct cyapa *cyapa) -{ - int error; - - error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate), - bl_deactivate); - if (error) - return error; - - /* wait for bootloader to switch to idle state; should take < 100ms */ - msleep(100); - error = cyapa_poll_state(cyapa, 500); - if (error) - return error; - if (cyapa->state != CYAPA_STATE_BL_IDLE) - return -EAGAIN; - return 0; -} - -/* - * Exit bootloader - * - * Send bl_exit command, then wait 50 - 100 ms to let device transition to - * operational mode. If this is the first time the device's firmware is - * running, it can take up to 2 seconds to calibrate its sensors. So, poll - * the device's new state for up to 2 seconds. - * - * Returns: - * -EIO failure while reading from device - * -EAGAIN device is stuck in bootloader, b/c it has invalid firmware - * 0 device is supported and in operational mode - */ -static int cyapa_bl_exit(struct cyapa *cyapa) -{ - int error; - - error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit); - if (error) - return error; - - /* - * Wait for bootloader to exit, and operation mode to start. - * Normally, this takes at least 50 ms. - */ - usleep_range(50000, 100000); - /* - * In addition, when a device boots for the first time after being - * updated to new firmware, it must first calibrate its sensors, which - * can take up to an additional 2 seconds. - */ - error = cyapa_poll_state(cyapa, 2000); - if (error < 0) - return error; - if (cyapa->state != CYAPA_STATE_OP) - return -EAGAIN; - - return 0; -} - -/* - * Set device power mode - * - */ -static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode) -{ - struct device *dev = &cyapa->client->dev; - int ret; - u8 power; - - if (cyapa->state != CYAPA_STATE_OP) - return 0; - - ret = cyapa_read_byte(cyapa, CYAPA_CMD_POWER_MODE); - if (ret < 0) - return ret; - - power = ret & ~PWR_MODE_MASK; - power |= power_mode & PWR_MODE_MASK; - ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power); - if (ret < 0) { - dev_err(dev, "failed to set power_mode 0x%02x err = %d\n", - power_mode, ret); - return ret; - } - - return 0; -} - -static int cyapa_get_query_data(struct cyapa *cyapa) -{ - u8 query_data[QUERY_DATA_SIZE]; - int ret; - - if (cyapa->state != CYAPA_STATE_OP) - return -EBUSY; - - ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_QUERY, query_data); - if (ret < 0) - return ret; - if (ret != QUERY_DATA_SIZE) - return -EIO; - - memcpy(&cyapa->product_id[0], &query_data[0], 5); - cyapa->product_id[5] = '-'; - memcpy(&cyapa->product_id[6], &query_data[5], 6); - cyapa->product_id[12] = '-'; - memcpy(&cyapa->product_id[13], &query_data[11], 2); - cyapa->product_id[15] = '\0'; - - cyapa->btn_capability = query_data[19] & CAPABILITY_BTN_MASK; - - cyapa->gen = query_data[20] & 0x0f; - - cyapa->max_abs_x = ((query_data[21] & 0xf0) << 4) | query_data[22]; - cyapa->max_abs_y = ((query_data[21] & 0x0f) << 8) | query_data[23]; - - cyapa->physical_size_x = - ((query_data[24] & 0xf0) << 4) | query_data[25]; - cyapa->physical_size_y = - ((query_data[24] & 0x0f) << 8) | query_data[26]; + msleep(100); + } while (tries--); - return 0; + return (error == -EAGAIN || error == -ETIMEDOUT) ? -ETIMEDOUT : error; } /* @@ -628,8 +254,10 @@ static int cyapa_get_query_data(struct cyapa *cyapa) * firmware supported by this driver. * * Returns: + * -ENODEV no device * -EBUSY no device or in bootloader * -EIO failure while reading from device + * -ETIMEDOUT timeout failure for bus idle or bus no response * -EAGAIN device is still in bootloader * if ->state = CYAPA_STATE_BL_IDLE, device has invalid firmware * -EINVAL device is in operational mode, but not supported by this driver @@ -637,122 +265,53 @@ static int cyapa_get_query_data(struct cyapa *cyapa) */ static int cyapa_check_is_operational(struct cyapa *cyapa) { - struct device *dev = &cyapa->client->dev; - static const char unique_str[] = "CYTRA"; int error; - error = cyapa_poll_state(cyapa, 2000); + error = cyapa_poll_state(cyapa, 4000); if (error) return error; - switch (cyapa->state) { - case CYAPA_STATE_BL_ACTIVE: - error = cyapa_bl_deactivate(cyapa); - if (error) - return error; - - /* Fallthrough state */ - case CYAPA_STATE_BL_IDLE: - error = cyapa_bl_exit(cyapa); - if (error) - return error; - - /* Fallthrough state */ - case CYAPA_STATE_OP: - error = cyapa_get_query_data(cyapa); - if (error) - return error; - - /* only support firmware protocol gen3 */ - if (cyapa->gen != CYAPA_GEN3) { - dev_err(dev, "unsupported protocol version (%d)", - cyapa->gen); - return -EINVAL; - } - - /* only support product ID starting with CYTRA */ - if (memcmp(cyapa->product_id, unique_str, - sizeof(unique_str) - 1) != 0) { - dev_err(dev, "unsupported product ID (%s)\n", - cyapa->product_id); - return -EINVAL; - } - return 0; + switch (cyapa->gen) { + case CYAPA_GEN3: + cyapa->ops = &cyapa_gen3_ops; + break; default: - return -EIO; + return -ENODEV; } - return 0; + + error = cyapa->ops->operational_check(cyapa); + if (!error && cyapa_is_operational_mode(cyapa)) + cyapa->operational = true; + else + cyapa->operational = false; + + return error; } -static irqreturn_t cyapa_irq(int irq, void *dev_id) + +/* + * Returns 0 on device detected, negative errno on no device detected. + * And when the device is detected and opertaional, it will be reset to + * full power active mode automatically. + */ +static int cyapa_detect(struct cyapa *cyapa) { - struct cyapa *cyapa = dev_id; struct device *dev = &cyapa->client->dev; - struct input_dev *input = cyapa->input; - struct cyapa_reg_data data; - int i; - int ret; - int num_fingers; - - if (device_may_wakeup(dev)) - pm_wakeup_event(dev, 0); - - ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data); - if (ret != sizeof(data)) - goto out; + int error; - if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC || - (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL || - (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) { - goto out; - } + error = cyapa_check_is_operational(cyapa); + if (error) { + if (error != -ETIMEDOUT && error != -ENODEV && + cyapa_is_bootloader_mode(cyapa)) { + dev_warn(dev, "device detected but not operational\n"); + return 0; + } - num_fingers = (data.finger_btn >> 4) & 0x0f; - for (i = 0; i < num_fingers; i++) { - const struct cyapa_touch *touch = &data.touches[i]; - /* Note: touch->id range is 1 to 15; slots are 0 to 14. */ - int slot = touch->id - 1; - - input_mt_slot(input, slot); - input_mt_report_slot_state(input, MT_TOOL_FINGER, true); - input_report_abs(input, ABS_MT_POSITION_X, - ((touch->xy_hi & 0xf0) << 4) | touch->x_lo); - input_report_abs(input, ABS_MT_POSITION_Y, - ((touch->xy_hi & 0x0f) << 8) | touch->y_lo); - input_report_abs(input, ABS_MT_PRESSURE, touch->pressure); + dev_err(dev, "no device detected: %d\n", error); + return error; } - input_mt_sync_frame(input); - - if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK) - input_report_key(input, BTN_LEFT, - data.finger_btn & OP_DATA_LEFT_BTN); - - if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK) - input_report_key(input, BTN_MIDDLE, - data.finger_btn & OP_DATA_MIDDLE_BTN); - - if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK) - input_report_key(input, BTN_RIGHT, - data.finger_btn & OP_DATA_RIGHT_BTN); - - input_sync(input); - -out: - return IRQ_HANDLED; -} - -static u8 cyapa_check_adapter_functionality(struct i2c_client *client) -{ - u8 ret = CYAPA_ADAPTER_FUNC_NONE; - - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) - ret |= CYAPA_ADAPTER_FUNC_I2C; - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA | - I2C_FUNC_SMBUS_I2C_BLOCK)) - ret |= CYAPA_ADAPTER_FUNC_SMBUS; - return ret; + return 0; } static int cyapa_open(struct input_dev *input) @@ -761,22 +320,49 @@ static int cyapa_open(struct input_dev *input) struct i2c_client *client = cyapa->client; int error; - error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); - if (error) { - dev_err(&client->dev, "set active power failed: %d\n", error); + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) return error; + + if (cyapa->operational) { + /* + * though failed to set active power mode, + * but still may be able to work in lower scan rate + * when in operational mode. + */ + error = cyapa->ops->set_power_mode(cyapa, + PWR_MODE_FULL_ACTIVE, 0); + if (error) { + dev_warn(&client->dev, + "set active power failed: %d\n", error); + goto out; + } + } else { + error = cyapa_reinitialize(cyapa); + if (error || !cyapa->operational) { + error = error ? error : -EAGAIN; + goto out; + } } enable_irq(client->irq); - return 0; +out: + mutex_unlock(&cyapa->state_sync_lock); + return error; } static void cyapa_close(struct input_dev *input) { struct cyapa *cyapa = input_get_drvdata(input); + struct i2c_client *client = cyapa->client; + + mutex_lock(&cyapa->state_sync_lock); - disable_irq(cyapa->client->irq); - cyapa_set_power_mode(cyapa, PWR_MODE_OFF); + disable_irq(client->irq); + if (cyapa->operational) + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); + + mutex_unlock(&cyapa->state_sync_lock); } static int cyapa_create_input_dev(struct cyapa *cyapa) @@ -813,7 +399,28 @@ static int cyapa_create_input_dev(struct cyapa *cyapa) 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0, 0); - input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, cyapa->max_z, 0, 0); + if (cyapa->gen > CYAPA_GEN3) { + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0); + /* + * Orientation is the angle between the vertical axis and + * the major axis of the contact ellipse. + * The range is -127 to 127. + * the positive direction is clockwise form the vertical axis. + * If the ellipse of contact degenerates into a circle, + * orientation is reported as 0. + * + * Also, for Gen5 trackpad the accurate of this orientation + * value is value + (-30 ~ 30). + */ + input_set_abs_params(input, ABS_MT_ORIENTATION, + -127, 127, 0, 0); + } + if (cyapa->gen >= CYAPA_GEN5) { + input_set_abs_params(input, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(input, ABS_MT_WIDTH_MINOR, 0, 255, 0, 0); + } input_abs_set_res(input, ABS_MT_POSITION_X, cyapa->max_abs_x / cyapa->physical_size_x); @@ -838,16 +445,159 @@ static int cyapa_create_input_dev(struct cyapa *cyapa) return error; } + /* Register the device in input subsystem */ + error = input_register_device(input); + if (error) { + dev_err(dev, "failed to register input device: %d\n", error); + return error; + } + cyapa->input = input; return 0; } +/* + * cyapa_sleep_time_to_pwr_cmd and cyapa_pwr_cmd_to_sleep_time + * + * These are helper functions that convert to and from integer idle + * times and register settings to write to the PowerMode register. + * The trackpad supports between 20ms to 1000ms scan intervals. + * The time will be increased in increments of 10ms from 20ms to 100ms. + * From 100ms to 1000ms, time will be increased in increments of 20ms. + * + * When Idle_Time < 100, the format to convert Idle_Time to Idle_Command is: + * Idle_Command = Idle Time / 10; + * When Idle_Time >= 100, the format to convert Idle_Time to Idle_Command is: + * Idle_Command = Idle Time / 20 + 5; + */ +u8 cyapa_sleep_time_to_pwr_cmd(u16 sleep_time) +{ + u16 encoded_time; + + sleep_time = clamp_val(sleep_time, 20, 1000); + encoded_time = sleep_time < 100 ? sleep_time / 10 : sleep_time / 20 + 5; + return (encoded_time << 2) & PWR_MODE_MASK; +} + +u16 cyapa_pwr_cmd_to_sleep_time(u8 pwr_mode) +{ + u8 encoded_time = pwr_mode >> 2; + + return (encoded_time < 10) ? encoded_time * 10 + : (encoded_time - 5) * 20; +} + +/* 0 on driver initialize and detected successfully, negative on failure. */ +static int cyapa_initialize(struct cyapa *cyapa) +{ + int error = 0; + + cyapa->state = CYAPA_STATE_NO_DEVICE; + cyapa->gen = CYAPA_GEN_UNKNOWN; + mutex_init(&cyapa->state_sync_lock); + + /* + * Set to hard code default, they will be updated with trackpad set + * default values after probe and initialized. + */ + cyapa->suspend_power_mode = PWR_MODE_SLEEP; + cyapa->suspend_sleep_time = + cyapa_pwr_cmd_to_sleep_time(cyapa->suspend_power_mode); + + /* ops.initialize() is aimed to prepare for module communications. */ + error = cyapa_gen3_ops.initialize(cyapa); + if (error) + return error; + + error = cyapa_detect(cyapa); + if (error) + return error; + + /* Power down the device until we need it. */ + if (cyapa->operational) + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); + + return 0; +} + +static int cyapa_reinitialize(struct cyapa *cyapa) +{ + struct device *dev = &cyapa->client->dev; + struct input_dev *input = cyapa->input; + int error; + + /* Avoid command failures when TP was in OFF state. */ + if (cyapa->operational) + cyapa->ops->set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE, 0); + + error = cyapa_detect(cyapa); + if (error) + goto out; + + if (!input && cyapa->operational) { + error = cyapa_create_input_dev(cyapa); + if (error) { + dev_err(dev, "create input_dev instance failed: %d\n", + error); + goto out; + } + } + +out: + if (!input || !input->users) { + /* Reset to power OFF state to save power when no user open. */ + if (cyapa->operational) + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); + } + + return error; +} + +static irqreturn_t cyapa_irq(int irq, void *dev_id) +{ + struct cyapa *cyapa = dev_id; + struct device *dev = &cyapa->client->dev; + + if (device_may_wakeup(dev)) + pm_wakeup_event(dev, 0); + + /* Interrupt event maybe cuased by host command to trackpad device. */ + if (cyapa->ops->irq_cmd_handler(cyapa)) { + /* + * Interrupt event maybe from trackpad device input reporting. + */ + if (!cyapa->input) { + /* + * Still in probling or in firware image + * udpating or reading. + */ + cyapa->ops->sort_empty_output_data(cyapa, + NULL, NULL, NULL); + goto out; + } + + if (!cyapa->operational || cyapa->ops->irq_handler(cyapa)) { + if (!mutex_trylock(&cyapa->state_sync_lock)) { + cyapa->ops->sort_empty_output_data(cyapa, + NULL, NULL, NULL); + goto out; + } + cyapa_reinitialize(cyapa); + mutex_unlock(&cyapa->state_sync_lock); + } + } + +out: + return IRQ_HANDLED; +} + static int cyapa_probe(struct i2c_client *client, const struct i2c_device_id *dev_id) { struct device *dev = &client->dev; struct cyapa *cyapa; u8 adapter_func; + union i2c_smbus_data dummy; int error; adapter_func = cyapa_check_adapter_functionality(client); @@ -856,39 +606,30 @@ static int cyapa_probe(struct i2c_client *client, return -EIO; } + /* Make sure there is something at this address */ + if (i2c_smbus_xfer(client->adapter, client->addr, 0, + I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) + return -ENODEV; + cyapa = devm_kzalloc(dev, sizeof(struct cyapa), GFP_KERNEL); if (!cyapa) return -ENOMEM; - cyapa->gen = CYAPA_GEN3; - cyapa->client = client; - i2c_set_clientdata(client, cyapa); - sprintf(cyapa->phys, "i2c-%d-%04x/input0", client->adapter->nr, - client->addr); - /* i2c isn't supported, use smbus */ if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS) cyapa->smbus = true; - cyapa->state = CYAPA_STATE_NO_DEVICE; - - error = cyapa_check_is_operational(cyapa); - if (error) { - dev_err(dev, "device not operational, %d\n", error); - return error; - } + cyapa->client = client; + i2c_set_clientdata(client, cyapa); + sprintf(cyapa->phys, "i2c-%d-%04x/input0", client->adapter->nr, + client->addr); - /* Power down the device until we need it */ - error = cyapa_set_power_mode(cyapa, PWR_MODE_OFF); + error = cyapa_initialize(cyapa); if (error) { - dev_err(dev, "failed to quiesce the device: %d\n", error); + dev_err(dev, "failed to detect and initialize tp device.\n"); return error; } - error = cyapa_create_input_dev(cyapa); - if (error) - return error; - error = devm_request_threaded_irq(dev, client->irq, NULL, cyapa_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, @@ -901,11 +642,18 @@ static int cyapa_probe(struct i2c_client *client, /* Disable IRQ until the device is opened */ disable_irq(client->irq); - /* Register the device in input subsystem */ - error = input_register_device(cyapa->input); - if (error) { - dev_err(dev, "failed to register input device: %d\n", error); - return error; + /* + * Register the device in the input subsystem when it's operational. + * Otherwise, keep in this driver, so it can be be recovered or updated + * through the sysfs mode and update_fw interfaces by user or apps. + */ + if (cyapa->operational) { + error = cyapa_create_input_dev(cyapa); + if (error) { + dev_err(dev, "create input_dev instance failed: %d\n", + error); + return error; + } } return 0; @@ -915,11 +663,10 @@ static int __maybe_unused cyapa_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct cyapa *cyapa = i2c_get_clientdata(client); - struct input_dev *input = cyapa->input; u8 power_mode; int error; - error = mutex_lock_interruptible(&input->mutex); + error = mutex_lock_interruptible(&cyapa->state_sync_lock); if (error) return error; @@ -929,18 +676,20 @@ static int __maybe_unused cyapa_suspend(struct device *dev) * Set trackpad device to idle mode if wakeup is allowed, * otherwise turn off. */ - power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE - : PWR_MODE_OFF; - error = cyapa_set_power_mode(cyapa, power_mode); - if (error) - dev_err(dev, "resume: set power mode to %d failed: %d\n", - power_mode, error); + if (cyapa->operational) { + power_mode = device_may_wakeup(dev) ? cyapa->suspend_power_mode + : PWR_MODE_OFF; + error = cyapa->ops->set_power_mode(cyapa, power_mode, + cyapa->suspend_sleep_time); + if (error) + dev_err(dev, "suspend set power mode failed: %d\n", + error); + } if (device_may_wakeup(dev)) cyapa->irq_wake = (enable_irq_wake(client->irq) == 0); - mutex_unlock(&input->mutex); - + mutex_unlock(&cyapa->state_sync_lock); return 0; } @@ -948,25 +697,22 @@ static int __maybe_unused cyapa_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct cyapa *cyapa = i2c_get_clientdata(client); - struct input_dev *input = cyapa->input; - u8 power_mode; int error; - mutex_lock(&input->mutex); + mutex_lock(&cyapa->state_sync_lock); - if (device_may_wakeup(dev) && cyapa->irq_wake) + if (device_may_wakeup(dev) && cyapa->irq_wake) { disable_irq_wake(client->irq); + cyapa->irq_wake = false; + } - power_mode = input->users ? PWR_MODE_FULL_ACTIVE : PWR_MODE_OFF; - error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); + error = cyapa_reinitialize(cyapa); if (error) - dev_warn(dev, "resume: set power mode to %d failed: %d\n", - power_mode, error); + dev_warn(dev, "failed to reinitialize TP device: %d\n", error); enable_irq(client->irq); - mutex_unlock(&input->mutex); - + mutex_unlock(&cyapa->state_sync_lock); return 0; } |