diff options
author | Dongchun Zhu <dongchun.zhu@mediatek.com> | 2020-06-30 08:22:11 +0200 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2020-07-19 14:11:00 +0200 |
commit | 859891228e56b991f65acc349bbe118b44752beb (patch) | |
tree | 7b52a0a5ef251e38c0c7c98be1748f296ff60969 /drivers/media/i2c | |
parent | 3fa97ae054d3862c52b0a296b1cb36947cc9ab1d (diff) | |
download | linux-stable-859891228e56b991f65acc349bbe118b44752beb.tar.gz linux-stable-859891228e56b991f65acc349bbe118b44752beb.tar.bz2 linux-stable-859891228e56b991f65acc349bbe118b44752beb.zip |
media: i2c: dw9768: Add DW9768 VCM driver
Add a V4L2 sub-device driver for DW9768 voice coil motor,
providing control to set the desired focus via IIC serial interface.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'drivers/media/i2c')
-rw-r--r-- | drivers/media/i2c/Kconfig | 12 | ||||
-rw-r--r-- | drivers/media/i2c/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/i2c/dw9768.c | 554 |
3 files changed, 567 insertions, 0 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 6804ad57ee71..d2d86ced319d 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1254,6 +1254,18 @@ config VIDEO_DW9714 capability. This is designed for linear control of voice coil motors, controlled via I2C serial interface. +config VIDEO_DW9768 + tristate "DW9768 lens voice coil support" + depends on I2C && VIDEO_V4L2 + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + This is a driver for the DW9768 camera lens voice coil. + DW9768 is a 10 bit DAC with 100mA output current sink + capability. This is designed for linear control of + voice coil motors, controlled via I2C serial interface. + config VIDEO_DW9807_VCM tristate "DW9807 lens voice coil support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 993acab81b2c..33ad435bffea 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o obj-$(CONFIG_VIDEO_AD5820) += ad5820.o obj-$(CONFIG_VIDEO_AK7375) += ak7375.o obj-$(CONFIG_VIDEO_DW9714) += dw9714.o +obj-$(CONFIG_VIDEO_DW9768) += dw9768.o obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o diff --git a/drivers/media/i2c/dw9768.c b/drivers/media/i2c/dw9768.c new file mode 100644 index 000000000000..45cdd924b565 --- /dev/null +++ b/drivers/media/i2c/dw9768.c @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 MediaTek Inc. + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <media/v4l2-async.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-subdev.h> + +#define DW9768_NAME "dw9768" +#define DW9768_MAX_FOCUS_POS (1024 - 1) +/* + * This sets the minimum granularity for the focus positions. + * A value of 1 gives maximum accuracy for a desired focus position + */ +#define DW9768_FOCUS_STEPS 1 + +/* + * Ring control and Power control register + * Bit[1] RING_EN + * 0: Direct mode + * 1: AAC mode (ringing control mode) + * Bit[0] PD + * 0: Normal operation mode + * 1: Power down mode + * DW9768 requires waiting time of Topr after PD reset takes place. + */ +#define DW9768_RING_PD_CONTROL_REG 0x02 +#define DW9768_PD_MODE_OFF 0x00 +#define DW9768_PD_MODE_EN BIT(0) +#define DW9768_AAC_MODE_EN BIT(1) + +/* + * DW9768 separates two registers to control the VCM position. + * One for MSB value, another is LSB value. + * DAC_MSB: D[9:8] (ADD: 0x03) + * DAC_LSB: D[7:0] (ADD: 0x04) + * D[9:0] DAC data input: positive output current = D[9:0] / 1023 * 100[mA] + */ +#define DW9768_MSB_ADDR 0x03 +#define DW9768_LSB_ADDR 0x04 +#define DW9768_STATUS_ADDR 0x05 + +/* + * AAC mode control & prescale register + * Bit[7:5] Namely AC[2:0], decide the VCM mode and operation time. + * 001 AAC2 0.48 x Tvib + * 010 AAC3 0.70 x Tvib + * 011 AAC4 0.75 x Tvib + * 101 AAC8 1.13 x Tvib + * Bit[2:0] Namely PRESC[2:0], set the internal clock dividing rate as follow. + * 000 2 + * 001 1 + * 010 1/2 + * 011 1/4 + * 100 8 + * 101 4 + */ +#define DW9768_AAC_PRESC_REG 0x06 +#define DW9768_AAC_MODE_SEL_MASK GENMASK(7, 5) +#define DW9768_CLOCK_PRE_SCALE_SEL_MASK GENMASK(2, 0) + +/* + * VCM period of vibration register + * Bit[5:0] Defined as VCM rising periodic time (Tvib) together with PRESC[2:0] + * Tvib = (6.3ms + AACT[5:0] * 0.1ms) * Dividing Rate + * Dividing Rate is the internal clock dividing rate that is defined at + * PRESCALE register (ADD: 0x06) + */ +#define DW9768_AAC_TIME_REG 0x07 + +/* + * DW9768 requires waiting time (delay time) of t_OPR after power-up, + * or in the case of PD reset taking place. + */ +#define DW9768_T_OPR_US 1000 +#define DW9768_TVIB_MS_BASE10 (64 - 1) +#define DW9768_AAC_MODE_DEFAULT 2 +#define DW9768_AAC_TIME_DEFAULT 0x20 +#define DW9768_CLOCK_PRE_SCALE_DEFAULT 1 + +/* + * This acts as the minimum granularity of lens movement. + * Keep this value power of 2, so the control steps can be + * uniformly adjusted for gradual lens movement, with desired + * number of control steps. + */ +#define DW9768_MOVE_STEPS 16 + +static const char * const dw9768_supply_names[] = { + "vin", /* Digital I/O power */ + "vdd", /* Digital core power */ +}; + +/* dw9768 device structure */ +struct dw9768 { + struct regulator_bulk_data supplies[ARRAY_SIZE(dw9768_supply_names)]; + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *focus; + struct v4l2_subdev sd; + + u32 aac_mode; + u32 aac_timing; + u32 clock_presc; + u32 move_delay_us; +}; + +static inline struct dw9768 *sd_to_dw9768(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct dw9768, sd); +} + +struct regval_list { + u8 reg_num; + u8 value; +}; + +struct dw9768_aac_mode_ot_multi { + u32 aac_mode_enum; + u32 ot_multi_base100; +}; + +struct dw9768_clk_presc_dividing_rate { + u32 clk_presc_enum; + u32 dividing_rate_base100; +}; + +static const struct dw9768_aac_mode_ot_multi aac_mode_ot_multi[] = { + {1, 48}, + {2, 70}, + {3, 75}, + {5, 113}, +}; + +static const struct dw9768_clk_presc_dividing_rate presc_dividing_rate[] = { + {0, 200}, + {1, 100}, + {2, 50}, + {3, 25}, + {4, 800}, + {5, 400}, +}; + +static u32 dw9768_find_ot_multi(u32 aac_mode_param) +{ + u32 cur_ot_multi_base100 = 70; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(aac_mode_ot_multi); i++) { + if (aac_mode_ot_multi[i].aac_mode_enum == aac_mode_param) { + cur_ot_multi_base100 = + aac_mode_ot_multi[i].ot_multi_base100; + } + } + + return cur_ot_multi_base100; +} + +static u32 dw9768_find_dividing_rate(u32 presc_param) +{ + u32 cur_clk_dividing_rate_base100 = 100; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(presc_dividing_rate); i++) { + if (presc_dividing_rate[i].clk_presc_enum == presc_param) { + cur_clk_dividing_rate_base100 = + presc_dividing_rate[i].dividing_rate_base100; + } + } + + return cur_clk_dividing_rate_base100; +} + +/* + * DW9768_AAC_PRESC_REG & DW9768_AAC_TIME_REG determine VCM operation time. + * For current VCM mode: AAC3, Operation Time would be 0.70 x Tvib. + * Tvib = (6.3ms + AACT[5:0] * 0.1MS) * Dividing Rate. + * Below is calculation of the operation delay for each step. + */ +static inline u32 dw9768_cal_move_delay(u32 aac_mode_param, u32 presc_param, + u32 aac_timing_param) +{ + u32 Tvib_us; + u32 ot_multi_base100; + u32 clk_dividing_rate_base100; + + ot_multi_base100 = dw9768_find_ot_multi(aac_mode_param); + + clk_dividing_rate_base100 = dw9768_find_dividing_rate(presc_param); + + Tvib_us = (DW9768_TVIB_MS_BASE10 + aac_timing_param) * + clk_dividing_rate_base100; + + return Tvib_us * ot_multi_base100 / 100; +} + +static int dw9768_mod_reg(struct dw9768 *dw9768, u8 reg, u8 mask, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) + return ret; + + val = ((unsigned char)ret & ~mask) | (val & mask); + + return i2c_smbus_write_byte_data(client, reg, val); +} + +static int dw9768_set_dac(struct dw9768 *dw9768, u16 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); + + /* Write VCM position to registers */ + return i2c_smbus_write_word_swapped(client, DW9768_MSB_ADDR, val); +} + +static int dw9768_init(struct dw9768 *dw9768) +{ + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); + int ret, val; + + /* Reset DW9768_RING_PD_CONTROL_REG to default status 0x00 */ + ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, + DW9768_PD_MODE_OFF); + if (ret < 0) + return ret; + + /* + * DW9769 requires waiting delay time of t_OPR + * after PD reset takes place. + */ + usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); + + /* Set DW9768_RING_PD_CONTROL_REG to DW9768_AAC_MODE_EN(0x01) */ + ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, + DW9768_AAC_MODE_EN); + if (ret < 0) + return ret; + + /* Set AAC mode */ + ret = dw9768_mod_reg(dw9768, DW9768_AAC_PRESC_REG, + DW9768_AAC_MODE_SEL_MASK, + dw9768->aac_mode << 5); + if (ret < 0) + return ret; + + /* Set clock presc */ + if (dw9768->clock_presc != DW9768_CLOCK_PRE_SCALE_DEFAULT) { + ret = dw9768_mod_reg(dw9768, DW9768_AAC_PRESC_REG, + DW9768_CLOCK_PRE_SCALE_SEL_MASK, + dw9768->clock_presc); + if (ret < 0) + return ret; + } + + /* Set AAC Timing */ + if (dw9768->aac_timing != DW9768_AAC_TIME_DEFAULT) { + ret = i2c_smbus_write_byte_data(client, DW9768_AAC_TIME_REG, + dw9768->aac_timing); + if (ret < 0) + return ret; + } + + for (val = dw9768->focus->val % DW9768_MOVE_STEPS; + val <= dw9768->focus->val; + val += DW9768_MOVE_STEPS) { + ret = dw9768_set_dac(dw9768, val); + if (ret) { + dev_err(&client->dev, "I2C failure: %d", ret); + return ret; + } + usleep_range(dw9768->move_delay_us, + dw9768->move_delay_us + 1000); + } + + return 0; +} + +static int dw9768_release(struct dw9768 *dw9768) +{ + struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); + int ret, val; + + val = round_down(dw9768->focus->val, DW9768_MOVE_STEPS); + for ( ; val >= 0; val -= DW9768_MOVE_STEPS) { + ret = dw9768_set_dac(dw9768, val); + if (ret) { + dev_err(&client->dev, "I2C write fail: %d", ret); + return ret; + } + usleep_range(dw9768->move_delay_us, + dw9768->move_delay_us + 1000); + } + + ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, + DW9768_PD_MODE_EN); + if (ret < 0) + return ret; + + /* + * DW9769 requires waiting delay time of t_OPR + * after PD reset takes place. + */ + usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); + + return 0; +} + +static int dw9768_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct dw9768 *dw9768 = sd_to_dw9768(sd); + + dw9768_release(dw9768); + regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names), + dw9768->supplies); + + return 0; +} + +static int dw9768_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct dw9768 *dw9768 = sd_to_dw9768(sd); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(dw9768_supply_names), + dw9768->supplies); + if (ret < 0) { + dev_err(dev, "failed to enable regulators\n"); + return ret; + } + + /* + * The datasheet refers to t_OPR that needs to be waited before sending + * I2C commands after power-up. + */ + usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); + + ret = dw9768_init(dw9768); + if (ret < 0) + goto disable_regulator; + + return 0; + +disable_regulator: + regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names), + dw9768->supplies); + + return ret; +} + +static int dw9768_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct dw9768 *dw9768 = container_of(ctrl->handler, + struct dw9768, ctrls); + + if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE) + return dw9768_set_dac(dw9768, ctrl->val); + + return 0; +} + +static const struct v4l2_ctrl_ops dw9768_ctrl_ops = { + .s_ctrl = dw9768_set_ctrl, +}; + +static int dw9768_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + int ret; + + ret = pm_runtime_get_sync(sd->dev); + if (ret < 0) { + pm_runtime_put_noidle(sd->dev); + return ret; + } + + return 0; +} + +static int dw9768_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + pm_runtime_put(sd->dev); + + return 0; +} + +static const struct v4l2_subdev_internal_ops dw9768_int_ops = { + .open = dw9768_open, + .close = dw9768_close, +}; + +static const struct v4l2_subdev_ops dw9768_ops = { }; + +static int dw9768_init_controls(struct dw9768 *dw9768) +{ + struct v4l2_ctrl_handler *hdl = &dw9768->ctrls; + const struct v4l2_ctrl_ops *ops = &dw9768_ctrl_ops; + + v4l2_ctrl_handler_init(hdl, 1); + + dw9768->focus = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE, 0, + DW9768_MAX_FOCUS_POS, + DW9768_FOCUS_STEPS, 0); + + if (hdl->error) + return hdl->error; + + dw9768->sd.ctrl_handler = hdl; + + return 0; +} + +static int dw9768_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct dw9768 *dw9768; + unsigned int i; + int ret; + + dw9768 = devm_kzalloc(dev, sizeof(*dw9768), GFP_KERNEL); + if (!dw9768) + return -ENOMEM; + + /* Initialize subdev */ + v4l2_i2c_subdev_init(&dw9768->sd, client, &dw9768_ops); + + dw9768->aac_mode = DW9768_AAC_MODE_DEFAULT; + dw9768->aac_timing = DW9768_AAC_TIME_DEFAULT; + dw9768->clock_presc = DW9768_CLOCK_PRE_SCALE_DEFAULT; + + /* Optional indication of AAC mode select */ + fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,aac-mode", + &dw9768->aac_mode); + + /* Optional indication of clock pre-scale select */ + fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,clock-presc", + &dw9768->clock_presc); + + /* Optional indication of AAC Timing */ + fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,aac-timing", + &dw9768->aac_timing); + + dw9768->move_delay_us = dw9768_cal_move_delay(dw9768->aac_mode, + dw9768->clock_presc, + dw9768->aac_timing); + + for (i = 0; i < ARRAY_SIZE(dw9768_supply_names); i++) + dw9768->supplies[i].supply = dw9768_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dw9768_supply_names), + dw9768->supplies); + if (ret) { + dev_err(dev, "failed to get regulators\n"); + return ret; + } + + /* Initialize controls */ + ret = dw9768_init_controls(dw9768); + if (ret) + goto err_free_handler; + + /* Initialize subdev */ + dw9768->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + dw9768->sd.internal_ops = &dw9768_int_ops; + + ret = media_entity_pads_init(&dw9768->sd.entity, 0, NULL); + if (ret < 0) + goto err_free_handler; + + dw9768->sd.entity.function = MEDIA_ENT_F_LENS; + + pm_runtime_enable(dev); + if (!pm_runtime_enabled(dev)) { + ret = dw9768_runtime_resume(dev); + if (ret < 0) { + dev_err(dev, "failed to power on: %d\n", ret); + goto err_clean_entity; + } + } + + ret = v4l2_async_register_subdev(&dw9768->sd); + if (ret < 0) { + dev_err(dev, "failed to register V4L2 subdev: %d", ret); + goto err_power_off; + } + + return 0; + +err_power_off: + if (pm_runtime_enabled(dev)) + pm_runtime_disable(dev); + else + dw9768_runtime_suspend(dev); +err_clean_entity: + media_entity_cleanup(&dw9768->sd.entity); +err_free_handler: + v4l2_ctrl_handler_free(&dw9768->ctrls); + + return ret; +} + +static int dw9768_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct dw9768 *dw9768 = sd_to_dw9768(sd); + + v4l2_async_unregister_subdev(&dw9768->sd); + v4l2_ctrl_handler_free(&dw9768->ctrls); + media_entity_cleanup(&dw9768->sd.entity); + pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + dw9768_runtime_suspend(&client->dev); + pm_runtime_set_suspended(&client->dev); + + return 0; +} + +static const struct of_device_id dw9768_of_table[] = { + { .compatible = "dongwoon,dw9768" }, + { .compatible = "giantec,gt9769" }, + {} +}; +MODULE_DEVICE_TABLE(of, dw9768_of_table); + +static const struct dev_pm_ops dw9768_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(dw9768_runtime_suspend, dw9768_runtime_resume, NULL) +}; + +static struct i2c_driver dw9768_i2c_driver = { + .driver = { + .name = DW9768_NAME, + .pm = &dw9768_pm_ops, + .of_match_table = dw9768_of_table, + }, + .probe_new = dw9768_probe, + .remove = dw9768_remove, +}; +module_i2c_driver(dw9768_i2c_driver); + +MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>"); +MODULE_DESCRIPTION("DW9768 VCM driver"); +MODULE_LICENSE("GPL v2"); |