diff options
author | Boris Brezillon <boris.brezillon@bootlin.com> | 2018-04-26 18:18:19 +0200 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2018-05-11 11:33:51 +0900 |
commit | 4120f8d158ef904fb305b27e4a4524649faf3096 (patch) | |
tree | 0ec931c1e37ca8a62928142a5a1ff0d88d08b18d /drivers/mtd/devices/m25p80.c | |
parent | b95cb394ab591d1d6dcc7281b415fde0a3de2ae1 (diff) | |
download | linux-stable-4120f8d158ef904fb305b27e4a4524649faf3096.tar.gz linux-stable-4120f8d158ef904fb305b27e4a4524649faf3096.tar.bz2 linux-stable-4120f8d158ef904fb305b27e4a4524649faf3096.zip |
mtd: spi-nor: Use the spi_mem_xx() API
The spi_mem_xxx() API has been introduced to replace the
spi_flash_read() one. Make use of it so we can get rid of
spi_flash_read().
Note that using spi_mem_xx() also simplifies the code because this API
takes care of using the regular spi_sync() interface when the optimized
->mem_ops interface is not implemented by the controller.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de>
Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/mtd/devices/m25p80.c')
-rw-r--r-- | drivers/mtd/devices/m25p80.c | 236 |
1 files changed, 79 insertions, 157 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index a4e18f6aaa33..3dc022d3b53e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -24,12 +24,13 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> #include <linux/spi/flash.h> #include <linux/mtd/spi-nor.h> #define MAX_CMD_SIZE 6 struct m25p { - struct spi_device *spi; + struct spi_mem *spimem; struct spi_nor spi_nor; u8 command[MAX_CMD_SIZE]; }; @@ -37,97 +38,68 @@ struct m25p { static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(len, val, 1)); int ret; - ret = spi_write_then_read(spi, &code, 1, val, len); + ret = spi_mem_exec_op(flash->spimem, &op); if (ret < 0) - dev_err(&spi->dev, "error %d reading %x\n", ret, code); + dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret, + code); return ret; } -static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd) -{ - /* opcode is in cmd[0] */ - cmd[1] = addr >> (nor->addr_width * 8 - 8); - cmd[2] = addr >> (nor->addr_width * 8 - 16); - cmd[3] = addr >> (nor->addr_width * 8 - 24); - cmd[4] = addr >> (nor->addr_width * 8 - 32); -} - -static int m25p_cmdsz(struct spi_nor *nor) -{ - return 1 + nor->addr_width; -} - static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - - flash->command[0] = opcode; - if (buf) - memcpy(&flash->command[1], buf, len); + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, buf, 1)); - return spi_write(spi, flash->command, len + 1); + return spi_mem_exec_op(flash->spimem, &op); } static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, const u_char *buf) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; - struct spi_transfer t[3] = {}; - struct spi_message m; - int cmd_sz = m25p_cmdsz(nor); - ssize_t ret; + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, to, 1), + SPI_MEM_OP_DUMMY(0, 1), + SPI_MEM_OP_DATA_OUT(len, buf, 1)); + size_t remaining = len; + int ret; /* get transfer protocols. */ - inst_nbits = spi_nor_get_protocol_inst_nbits(nor->write_proto); - addr_nbits = spi_nor_get_protocol_addr_nbits(nor->write_proto); - data_nbits = spi_nor_get_protocol_data_nbits(nor->write_proto); - - spi_message_init(&m); + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) - cmd_sz = 1; - - flash->command[0] = nor->program_opcode; - m25p_addr2cmd(nor, to, flash->command); + op.addr.nbytes = 0; - t[0].tx_buf = flash->command; - t[0].tx_nbits = inst_nbits; - t[0].len = cmd_sz; - spi_message_add_tail(&t[0], &m); - - /* split the op code and address bytes into two transfers if needed. */ - data_idx = 1; - if (addr_nbits != inst_nbits) { - t[0].len = 1; + while (remaining) { + op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; + ret = spi_mem_adjust_op_size(flash->spimem, &op); + if (ret) + return ret; - t[1].tx_buf = &flash->command[1]; - t[1].tx_nbits = addr_nbits; - t[1].len = cmd_sz - 1; - spi_message_add_tail(&t[1], &m); + ret = spi_mem_exec_op(flash->spimem, &op); + if (ret) + return ret; - data_idx = 2; + op.addr.val += op.data.nbytes; + remaining -= op.data.nbytes; + op.data.buf.out += op.data.nbytes; } - t[data_idx].tx_buf = buf; - t[data_idx].tx_nbits = data_nbits; - t[data_idx].len = len; - spi_message_add_tail(&t[data_idx], &m); - - ret = spi_sync(spi, &m); - if (ret) - return ret; - - ret = m.actual_length - cmd_sz; - if (ret < 0) - return -EIO; - return ret; + return len; } /* @@ -138,92 +110,39 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, u_char *buf) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; - struct spi_transfer t[3]; - struct spi_message m; - unsigned int dummy = nor->read_dummy; - ssize_t ret; - int cmd_sz; + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, from, 1), + SPI_MEM_OP_DUMMY(nor->read_dummy, 1), + SPI_MEM_OP_DATA_IN(len, buf, 1)); + size_t remaining = len; + int ret; /* get transfer protocols. */ - inst_nbits = spi_nor_get_protocol_inst_nbits(nor->read_proto); - addr_nbits = spi_nor_get_protocol_addr_nbits(nor->read_proto); - data_nbits = spi_nor_get_protocol_data_nbits(nor->read_proto); + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); /* convert the dummy cycles to the number of bytes */ - dummy = (dummy * addr_nbits) / 8; - - if (spi_flash_read_supported(spi)) { - struct spi_flash_read_message msg; - - memset(&msg, 0, sizeof(msg)); + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; - msg.buf = buf; - msg.from = from; - msg.len = len; - msg.read_opcode = nor->read_opcode; - msg.addr_width = nor->addr_width; - msg.dummy_bytes = dummy; - msg.opcode_nbits = inst_nbits; - msg.addr_nbits = addr_nbits; - msg.data_nbits = data_nbits; - - ret = spi_flash_read(spi, &msg); - if (ret < 0) + while (remaining) { + op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; + ret = spi_mem_adjust_op_size(flash->spimem, &op); + if (ret) return ret; - return msg.retlen; - } - spi_message_init(&m); - memset(t, 0, (sizeof t)); - - flash->command[0] = nor->read_opcode; - m25p_addr2cmd(nor, from, flash->command); - - t[0].tx_buf = flash->command; - t[0].tx_nbits = inst_nbits; - t[0].len = m25p_cmdsz(nor) + dummy; - spi_message_add_tail(&t[0], &m); - - /* - * Set all dummy/mode cycle bits to avoid sending some manufacturer - * specific pattern, which might make the memory enter its Continuous - * Read mode by mistake. - * Based on the different mode cycle bit patterns listed and described - * in the JESD216B specification, the 0xff value works for all memories - * and all manufacturers. - */ - cmd_sz = t[0].len; - memset(flash->command + cmd_sz - dummy, 0xff, dummy); - - /* split the op code and address bytes into two transfers if needed. */ - data_idx = 1; - if (addr_nbits != inst_nbits) { - t[0].len = 1; - - t[1].tx_buf = &flash->command[1]; - t[1].tx_nbits = addr_nbits; - t[1].len = cmd_sz - 1; - spi_message_add_tail(&t[1], &m); + ret = spi_mem_exec_op(flash->spimem, &op); + if (ret) + return ret; - data_idx = 2; + op.addr.val += op.data.nbytes; + remaining -= op.data.nbytes; + op.data.buf.in += op.data.nbytes; } - t[data_idx].rx_buf = buf; - t[data_idx].rx_nbits = data_nbits; - t[data_idx].len = min3(len, spi_max_transfer_size(spi), - spi_max_message_size(spi) - cmd_sz); - spi_message_add_tail(&t[data_idx], &m); - - ret = spi_sync(spi, &m); - if (ret) - return ret; - - ret = m.actual_length - cmd_sz; - if (ret < 0) - return -EIO; - return ret; + return len; } /* @@ -231,8 +150,9 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, * matches what the READ command supports, at least until this driver * understands FAST_READ (for clocks over 25 MHz). */ -static int m25p_probe(struct spi_device *spi) +static int m25p_probe(struct spi_mem *spimem) { + struct spi_device *spi = spimem->spi; struct flash_platform_data *data; struct m25p *flash; struct spi_nor *nor; @@ -244,9 +164,9 @@ static int m25p_probe(struct spi_device *spi) char *flash_name; int ret; - data = dev_get_platdata(&spi->dev); + data = dev_get_platdata(&spimem->spi->dev); - flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); + flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; @@ -258,12 +178,12 @@ static int m25p_probe(struct spi_device *spi) nor->write_reg = m25p80_write_reg; nor->read_reg = m25p80_read_reg; - nor->dev = &spi->dev; + nor->dev = &spimem->spi->dev; spi_nor_set_flash_node(nor, spi->dev.of_node); nor->priv = flash; spi_set_drvdata(spi, flash); - flash->spi = spi; + flash->spimem = spimem; if (spi->mode & SPI_RX_QUAD) { hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; @@ -303,9 +223,9 @@ static int m25p_probe(struct spi_device *spi) } -static int m25p_remove(struct spi_device *spi) +static int m25p_remove(struct spi_mem *spimem) { - struct m25p *flash = spi_get_drvdata(spi); + struct m25p *flash = spi_mem_get_drvdata(spimem); spi_nor_restore(&flash->spi_nor); @@ -313,9 +233,9 @@ static int m25p_remove(struct spi_device *spi) return mtd_device_unregister(&flash->spi_nor.mtd); } -static void m25p_shutdown(struct spi_device *spi) +static void m25p_shutdown(struct spi_mem *spimem) { - struct m25p *flash = spi_get_drvdata(spi); + struct m25p *flash = spi_mem_get_drvdata(spimem); spi_nor_restore(&flash->spi_nor); } @@ -386,12 +306,14 @@ static const struct of_device_id m25p_of_table[] = { }; MODULE_DEVICE_TABLE(of, m25p_of_table); -static struct spi_driver m25p80_driver = { - .driver = { - .name = "m25p80", - .of_match_table = m25p_of_table, +static struct spi_mem_driver m25p80_driver = { + .spidrv = { + .driver = { + .name = "m25p80", + .of_match_table = m25p_of_table, + }, + .id_table = m25p_ids, }, - .id_table = m25p_ids, .probe = m25p_probe, .remove = m25p_remove, .shutdown = m25p_shutdown, @@ -402,7 +324,7 @@ static struct spi_driver m25p80_driver = { */ }; -module_spi_driver(m25p80_driver); +module_spi_mem_driver(m25p80_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mike Lavender"); |