Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...

1 files changed, 77 insertions, 76 deletions

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 6958830cb983..313793f6922d 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -132,7 +132,6 @@
 /* For the high buffers we clear the interrupt bit and newdat */
 #define IF_COMM_RCV_HIGH	(IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT)
 
-
 /* Receive setup of message objects */
 #define IF_COMM_RCV_SETUP	(IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL)
 
@@ -161,9 +160,7 @@
 
 #define IF_MCONT_TX		(IF_MCONT_TXIE | IF_MCONT_EOB)
 
-/*
- * Use IF1 for RX and IF2 for TX
- */
+/* Use IF1 for RX and IF2 for TX */
 #define IF_RX			0
 #define IF_TX			1
 
@@ -173,9 +170,6 @@
 /* Wait for ~1 sec for INIT bit */
 #define INIT_WAIT_MS		1000
 
-/* napi related */
-#define C_CAN_NAPI_WEIGHT	C_CAN_MSG_OBJ_RX_NUM
-
 /* c_can lec values */
 enum c_can_lec_type {
 	LEC_NO_ERROR = 0,
@@ -189,8 +183,7 @@ enum c_can_lec_type {
 	LEC_MASK = LEC_UNUSED,
 };
 
-/*
- * c_can error types:
+/* c_can error types:
  * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported
  */
 enum c_can_bus_error_types {
@@ -253,7 +246,6 @@ static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj
 		udelay(1);
 	}
 	netdev_err(dev, "Updating object timed out\n");
-
 }
 
 static inline void c_can_object_get(struct net_device *dev, int iface,
@@ -268,8 +260,7 @@ static inline void c_can_object_put(struct net_device *dev, int iface,
 	c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj);
 }
 
-/*
- * Note: According to documentation clearing TXIE while MSGVAL is set
+/* Note: According to documentation clearing TXIE while MSGVAL is set
  * is not allowed, but works nicely on C/DCAN. And that lowers the I/O
  * load significantly.
  */
@@ -285,8 +276,7 @@ static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
 {
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
-	priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0);
+	priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
 	c_can_inval_tx_object(dev, iface, obj);
 }
 
@@ -309,12 +299,11 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface,
 	if (!rtr)
 		arb |= IF_ARB_TRANSMIT;
 
-	/*
-	 * If we change the DIR bit, we need to invalidate the buffer
+	/* If we change the DIR bit, we need to invalidate the buffer
 	 * first, i.e. clear the MSGVAL flag in the arbiter.
 	 */
 	if (rtr != (bool)test_bit(idx, &priv->tx_dir)) {
-		u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+		u32 obj = idx + priv->msg_obj_tx_first;
 
 		c_can_inval_msg_object(dev, iface, obj);
 		change_bit(idx, &priv->tx_dir);
@@ -447,18 +436,16 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 
 	if (can_dropped_invalid_skb(dev, skb))
 		return NETDEV_TX_OK;
-	/*
-	 * This is not a FIFO. C/D_CAN sends out the buffers
+	/* This is not a FIFO. C/D_CAN sends out the buffers
 	 * prioritized. The lowest buffer number wins.
 	 */
 	idx = fls(atomic_read(&priv->tx_active));
-	obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+	obj = idx + priv->msg_obj_tx_first;
 
 	/* If this is the last buffer, stop the xmit queue */
-	if (idx == C_CAN_MSG_OBJ_TX_NUM - 1)
+	if (idx == priv->msg_obj_tx_num - 1)
 		netif_stop_queue(dev);
-	/*
-	 * Store the message in the interface so we can call
+	/* Store the message in the interface so we can call
 	 * can_put_echo_skb(). We must do this before we enable
 	 * transmit as we might race against do_tx().
 	 */
@@ -467,7 +454,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	can_put_echo_skb(skb, dev, idx, 0);
 
 	/* Update the active bits */
-	atomic_add((1 << idx), &priv->tx_active);
+	atomic_add(BIT(idx), &priv->tx_active);
 	/* Start transmission */
 	c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
 
@@ -511,7 +498,7 @@ static int c_can_set_bittiming(struct net_device *dev)
 	reg_brpe = brpe & BRP_EXT_BRPE_MASK;
 
 	netdev_info(dev,
-		"setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
+		    "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
 
 	ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG);
 	ctrl_save &= ~CONTROL_INIT;
@@ -527,8 +514,7 @@ static int c_can_set_bittiming(struct net_device *dev)
 	return c_can_wait_for_ctrl_init(dev, priv, 0);
 }
 
-/*
- * Configure C_CAN message objects for Tx and Rx purposes:
+/* Configure C_CAN message objects for Tx and Rx purposes:
  * C_CAN provides a total of 32 message objects that can be configured
  * either for Tx or Rx purposes. Here the first 16 message objects are used as
  * a reception FIFO. The end of reception FIFO is signified by the EoB bit
@@ -538,17 +524,18 @@ static int c_can_set_bittiming(struct net_device *dev)
  */
 static void c_can_configure_msg_objects(struct net_device *dev)
 {
+	struct c_can_priv *priv = netdev_priv(dev);
 	int i;
 
 	/* first invalidate all message objects */
-	for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++)
+	for (i = priv->msg_obj_rx_first; i <= priv->msg_obj_num; i++)
 		c_can_inval_msg_object(dev, IF_RX, i);
 
 	/* setup receive message objects */
-	for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
+	for (i = priv->msg_obj_rx_first; i < priv->msg_obj_rx_last; i++)
 		c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV);
 
-	c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
+	c_can_setup_receive_object(dev, IF_RX, priv->msg_obj_rx_last, 0, 0,
 				   IF_MCONT_RCV_EOB);
 }
 
@@ -572,8 +559,7 @@ static int c_can_software_reset(struct net_device *dev)
 	return 0;
 }
 
-/*
- * Configure C_CAN chip:
+/* Configure C_CAN chip:
  * - enable/disable auto-retransmission
  * - set operating mode
  * - configure message objects
@@ -714,12 +700,21 @@ static void c_can_do_tx(struct net_device *dev)
 	struct net_device_stats *stats = &dev->stats;
 	u32 idx, obj, pkts = 0, bytes = 0, pend, clr;
 
-	clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+	if (priv->msg_obj_tx_last > 32)
+		pend = priv->read_reg32(priv, C_CAN_INTPND3_REG);
+	else
+		pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+	clr = pend;
 
 	while ((idx = ffs(pend))) {
 		idx--;
-		pend &= ~(1 << idx);
-		obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+		pend &= ~BIT(idx);
+		obj = idx + priv->msg_obj_tx_first;
+
+		/* We use IF_RX interface instead of IF_TX because we
+		 * are called from c_can_poll(), which runs inside
+		 * NAPI. We are not trasmitting.
+		 */
 		c_can_inval_tx_object(dev, IF_RX, obj);
 		can_get_echo_skb(dev, idx, NULL);
 		bytes += priv->dlc[idx];
@@ -729,7 +724,7 @@ static void c_can_do_tx(struct net_device *dev)
 	/* Clear the bits in the tx_active mask */
 	atomic_sub(clr, &priv->tx_active);
 
-	if (clr & (1 << (C_CAN_MSG_OBJ_TX_NUM - 1)))
+	if (clr & BIT(priv->msg_obj_tx_num - 1))
 		netif_wake_queue(dev);
 
 	if (pkts) {
@@ -739,20 +734,18 @@ static void c_can_do_tx(struct net_device *dev)
 	}
 }
 
-/*
- * If we have a gap in the pending bits, that means we either
+/* If we have a gap in the pending bits, that means we either
  * raced with the hardware or failed to readout all upper
  * objects in the last run due to quota limit.
  */
-static u32 c_can_adjust_pending(u32 pend)
+static u32 c_can_adjust_pending(u32 pend, u32 rx_mask)
 {
 	u32 weight, lasts;
 
-	if (pend == RECEIVE_OBJECT_BITS)
+	if (pend == rx_mask)
 		return pend;
 
-	/*
-	 * If the last set bit is larger than the number of pending
+	/* If the last set bit is larger than the number of pending
 	 * bits we have a gap.
 	 */
 	weight = hweight32(pend);
@@ -762,19 +755,19 @@ static u32 c_can_adjust_pending(u32 pend)
 	if (lasts == weight)
 		return pend;
 
-	/*
-	 * Find the first set bit after the gap. We walk backwards
+	/* Find the first set bit after the gap. We walk backwards
 	 * from the last set bit.
 	 */
-	for (lasts--; pend & (1 << (lasts - 1)); lasts--);
+	for (lasts--; pend & BIT(lasts - 1); lasts--)
+		;
 
-	return pend & ~((1 << lasts) - 1);
+	return pend & ~GENMASK(lasts - 1, 0);
 }
 
 static inline void c_can_rx_object_get(struct net_device *dev,
 				       struct c_can_priv *priv, u32 obj)
 {
-		c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
+	c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
 }
 
 static inline void c_can_rx_finalize(struct net_device *dev,
@@ -803,8 +796,7 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
 			continue;
 		}
 
-		/*
-		 * This really should not happen, but this covers some
+		/* This really should not happen, but this covers some
 		 * odd HW behaviour. Do not remove that unless you
 		 * want to brick your machine.
 		 */
@@ -825,19 +817,22 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
 
 static inline u32 c_can_get_pending(struct c_can_priv *priv)
 {
-	u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
+	u32 pend;
+
+	if (priv->msg_obj_rx_last > 16)
+		pend = priv->read_reg32(priv, C_CAN_NEWDAT1_REG);
+	else
+		pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
 
 	return pend;
 }
 
-/*
- * theory of operation:
+/* theory of operation:
  *
  * c_can core saves a received CAN message into the first free message
  * object it finds free (starting with the lowest). Bits NEWDAT and
  * INTPND are set for this message object indicating that a new message
- * has arrived. To work-around this issue, we keep two groups of message
- * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT.
+ * has arrived.
  *
  * We clear the newdat bit right away.
  *
@@ -848,23 +843,16 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 	struct c_can_priv *priv = netdev_priv(dev);
 	u32 pkts = 0, pend = 0, toread, n;
 
-	/*
-	 * It is faster to read only one 16bit register. This is only possible
-	 * for a maximum number of 16 objects.
-	 */
-	BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16,
-			"Implementation does not support more message objects than 16");
-
 	while (quota > 0) {
 		if (!pend) {
 			pend = c_can_get_pending(priv);
 			if (!pend)
 				break;
-			/*
-			 * If the pending field has a gap, handle the
+			/* If the pending field has a gap, handle the
 			 * bits above the gap first.
 			 */
-			toread = c_can_adjust_pending(pend);
+			toread = c_can_adjust_pending(pend,
+						      priv->msg_obj_rx_mask);
 		} else {
 			toread = pend;
 		}
@@ -883,7 +871,7 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 }
 
 static int c_can_handle_state_change(struct net_device *dev,
-				enum c_can_bus_error_types error_type)
+				     enum c_can_bus_error_types error_type)
 {
 	unsigned int reg_err_counter;
 	unsigned int rx_err_passive;
@@ -979,8 +967,7 @@ static int c_can_handle_bus_err(struct net_device *dev,
 	struct can_frame *cf;
 	struct sk_buff *skb;
 
-	/*
-	 * early exit if no lec update or no error.
+	/* early exit if no lec update or no error.
 	 * no lec update means that no CAN bus event has been detected
 	 * since CPU wrote 0x7 value to status reg.
 	 */
@@ -999,8 +986,7 @@ static int c_can_handle_bus_err(struct net_device *dev,
 	if (unlikely(!skb))
 		return 0;
 
-	/*
-	 * check for 'last error code' which tells us the
+	/* check for 'last error code' which tells us the
 	 * type of the last error to occur on the CAN bus
 	 */
 	cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
@@ -1049,7 +1035,8 @@ static int c_can_poll(struct napi_struct *napi, int quota)
 
 	/* Only read the status register if a status interrupt was pending */
 	if (atomic_xchg(&priv->sie_pending, 0)) {
-		priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
+		priv->last_status = priv->read_reg(priv, C_CAN_STS_REG);
+		curr = priv->last_status;
 		/* Ack status on C_CAN. D_CAN is self clearing */
 		if (priv->type != BOSCH_D_CAN)
 			priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
@@ -1147,7 +1134,7 @@ static int c_can_open(struct net_device *dev)
 
 	/* register interrupt handler */
 	err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name,
-				dev);
+			  dev);
 	if (err < 0) {
 		netdev_err(dev, "failed to request interrupt\n");
 		goto exit_irq_fail;
@@ -1195,17 +1182,31 @@ static int c_can_close(struct net_device *dev)
 	return 0;
 }
 
-struct net_device *alloc_c_can_dev(void)
+struct net_device *alloc_c_can_dev(int msg_obj_num)
 {
 	struct net_device *dev;
 	struct c_can_priv *priv;
+	int msg_obj_tx_num = msg_obj_num / 2;
 
-	dev = alloc_candev(sizeof(struct c_can_priv), C_CAN_MSG_OBJ_TX_NUM);
+	dev = alloc_candev(struct_size(priv, dlc, msg_obj_tx_num),
+			   msg_obj_tx_num);
 	if (!dev)
 		return NULL;
 
 	priv = netdev_priv(dev);
-	netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT);
+	priv->msg_obj_num = msg_obj_num;
+	priv->msg_obj_rx_num = msg_obj_num - msg_obj_tx_num;
+	priv->msg_obj_rx_first = 1;
+	priv->msg_obj_rx_last =
+		priv->msg_obj_rx_first + priv->msg_obj_rx_num - 1;
+	priv->msg_obj_rx_mask = GENMASK(priv->msg_obj_rx_num - 1, 0);
+
+	priv->msg_obj_tx_num = msg_obj_tx_num;
+	priv->msg_obj_tx_first = priv->msg_obj_rx_last + 1;
+	priv->msg_obj_tx_last =
+		priv->msg_obj_tx_first + priv->msg_obj_tx_num - 1;
+
+	netif_napi_add(dev, &priv->napi, c_can_poll, priv->msg_obj_rx_num);
 
 	priv->dev = dev;
 	priv->can.bittiming_const = &c_can_bittiming_const;
@@ -1239,7 +1240,7 @@ int c_can_power_down(struct net_device *dev)
 	/* Wait for the PDA bit to get set */
 	time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
 	while (!(priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
-				time_after(time_out, jiffies))
+	       time_after(time_out, jiffies))
 		cpu_relax();
 
 	if (time_after(jiffies, time_out))
@@ -1280,7 +1281,7 @@ int c_can_power_up(struct net_device *dev)
 	/* Wait for the PDA bit to get clear */
 	time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
 	while ((priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
-				time_after(time_out, jiffies))
+	       time_after(time_out, jiffies))
 		cpu_relax();
 
 	if (time_after(jiffies, time_out)) {