diff options
author | Marcus Carlberg <marcus.carlberg@axis.com> | 2022-08-22 16:41:36 +0200 |
---|---|---|
committer | Jakub Kicinski <kuba@kernel.org> | 2022-08-26 16:30:55 -0700 |
commit | 1d2577ab0f052375379fa112d1aa34dbb4ef1463 (patch) | |
tree | d67a3c927462fbe0f4e77c141e46b69e7a041ace /drivers/net/dsa/mv88e6xxx/port.c | |
parent | 44387d1736c40a74085be354e2b5f37ca0689608 (diff) | |
download | linux-stable-1d2577ab0f052375379fa112d1aa34dbb4ef1463.tar.gz linux-stable-1d2577ab0f052375379fa112d1aa34dbb4ef1463.tar.bz2 linux-stable-1d2577ab0f052375379fa112d1aa34dbb4ef1463.zip |
net: dsa: mv88e6xxx: support RGMII cmode
Since the probe defaults all interfaces to the highest speed possible
(10GBASE-X in mv88e6393x) before the phy mode configuration from the
devicetree is considered it is currently impossible to use port 0 in
RGMII mode.
This change will allow RGMII modes to be configurable for port 0
enabling port 0 to be configured as RGMII as well as serial depending
on configuration.
Signed-off-by: Marcus Carlberg <marcus.carlberg@axis.com>
Link: https://lore.kernel.org/r/20220822144136.16627-1-marcus.carlberg@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/dsa/mv88e6xxx/port.c')
-rw-r--r-- | drivers/net/dsa/mv88e6xxx/port.c | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index 90c55f23b7c9..5c4195c635b0 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -517,6 +517,12 @@ static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port, case PHY_INTERFACE_MODE_RMII: cmode = MV88E6XXX_PORT_STS_CMODE_RMII; break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + cmode = MV88E6XXX_PORT_STS_CMODE_RGMII; + break; case PHY_INTERFACE_MODE_1000BASEX: cmode = MV88E6XXX_PORT_STS_CMODE_1000BASEX; break; @@ -634,6 +640,19 @@ int mv88e6393x_port_set_cmode(struct mv88e6xxx_chip *chip, int port, if (port != 0 && port != 9 && port != 10) return -EOPNOTSUPP; + if (port == 9 || port == 10) { + switch (mode) { + case PHY_INTERFACE_MODE_RMII: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + return -EINVAL; + default: + break; + } + } + /* mv88e6393x errata 4.5: EEE should be disabled on SERDES ports */ err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_MAC_CTL, ®); if (err) |