Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
  0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 42 insertions, 23 deletions

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 664eda4b5a11..8649b3e90edb 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -66,16 +66,27 @@ int ravb_wait(struct net_device *ndev, enum ravb_reg reg, u32 mask, u32 value)
 	return -ETIMEDOUT;
 }
 
-static int ravb_config(struct net_device *ndev)
+static int ravb_set_opmode(struct net_device *ndev, u32 opmode)
 {
+	u32 csr_ops = 1U << (opmode & CCC_OPC);
+	u32 ccc_mask = CCC_OPC;
 	int error;
 
-	/* Set config mode */
-	ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
-	/* Check if the operating mode is changed to the config mode */
-	error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_CONFIG);
-	if (error)
-		netdev_err(ndev, "failed to switch device to config mode\n");
+	/* If gPTP active in config mode is supported it needs to be configured
+	 * along with CSEL and operating mode in the same access. This is a
+	 * hardware limitation.
+	 */
+	if (opmode & CCC_GAC)
+		ccc_mask |= CCC_GAC | CCC_CSEL;
+
+	/* Set operating mode */
+	ravb_modify(ndev, CCC, ccc_mask, opmode);
+	/* Check if the operating mode is changed to the requested one */
+	error = ravb_wait(ndev, CSR, CSR_OPS, csr_ops);
+	if (error) {
+		netdev_err(ndev, "failed to switch device to requested mode (%u)\n",
+			   opmode & CCC_OPC);
+	}
 
 	return error;
 }
@@ -673,7 +684,7 @@ static int ravb_dmac_init(struct net_device *ndev)
 	int error;
 
 	/* Set CONFIG mode */
-	error = ravb_config(ndev);
+	error = ravb_set_opmode(ndev, CCC_OPC_CONFIG);
 	if (error)
 		return error;
 
@@ -682,9 +693,7 @@ static int ravb_dmac_init(struct net_device *ndev)
 		return error;
 
 	/* Setting the control will start the AVB-DMAC process. */
-	ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_OPERATION);
-
-	return 0;
+	return ravb_set_opmode(ndev, CCC_OPC_OPERATION);
 }
 
 static void ravb_get_tx_tstamp(struct net_device *ndev)
@@ -1046,7 +1055,7 @@ static int ravb_stop_dma(struct net_device *ndev)
 		return error;
 
 	/* Stop AVB-DMAC process */
-	return ravb_config(ndev);
+	return ravb_set_opmode(ndev, CCC_OPC_CONFIG);
 }
 
 /* E-MAC interrupt handler */
@@ -2560,21 +2569,25 @@ static int ravb_set_gti(struct net_device *ndev)
 	return 0;
 }
 
-static void ravb_set_config_mode(struct net_device *ndev)
+static int ravb_set_config_mode(struct net_device *ndev)
 {
 	struct ravb_private *priv = netdev_priv(ndev);
 	const struct ravb_hw_info *info = priv->info;
+	int error;
 
 	if (info->gptp) {
-		ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
+		error = ravb_set_opmode(ndev, CCC_OPC_CONFIG);
+		if (error)
+			return error;
 		/* Set CSEL value */
 		ravb_modify(ndev, CCC, CCC_CSEL, CCC_CSEL_HPB);
 	} else if (info->ccc_gac) {
-		ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG |
-			    CCC_GAC | CCC_CSEL_HPB);
+		error = ravb_set_opmode(ndev, CCC_OPC_CONFIG | CCC_GAC | CCC_CSEL_HPB);
 	} else {
-		ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
+		error = ravb_set_opmode(ndev, CCC_OPC_CONFIG);
 	}
+
+	return error;
 }
 
 /* Set tx and rx clock internal delay modes */
@@ -2794,7 +2807,9 @@ static int ravb_probe(struct platform_device *pdev)
 	ndev->ethtool_ops = &ravb_ethtool_ops;
 
 	/* Set AVB config mode */
-	ravb_set_config_mode(ndev);
+	error = ravb_set_config_mode(ndev);
+	if (error)
+		goto out_disable_gptp_clk;
 
 	if (info->gptp || info->ccc_gac) {
 		/* Set GTI value */
@@ -2917,8 +2932,7 @@ static void ravb_remove(struct platform_device *pdev)
 	dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
 			  priv->desc_bat_dma);
 
-	/* Set reset mode */
-	ravb_write(ndev, CCC_OPC_RESET, CCC);
+	ravb_set_opmode(ndev, CCC_OPC_RESET);
 
 	clk_disable_unprepare(priv->gptp_clk);
 	clk_disable_unprepare(priv->refclk);
@@ -3000,8 +3014,11 @@ static int __maybe_unused ravb_resume(struct device *dev)
 	int ret = 0;
 
 	/* If WoL is enabled set reset mode to rearm the WoL logic */
-	if (priv->wol_enabled)
-		ravb_write(ndev, CCC_OPC_RESET, CCC);
+	if (priv->wol_enabled) {
+		ret = ravb_set_opmode(ndev, CCC_OPC_RESET);
+		if (ret)
+			return ret;
+	}
 
 	/* All register have been reset to default values.
 	 * Restore all registers which where setup at probe time and
@@ -3009,7 +3026,9 @@ static int __maybe_unused ravb_resume(struct device *dev)
 	 */
 
 	/* Set AVB config mode */
-	ravb_set_config_mode(ndev);
+	ret = ravb_set_config_mode(ndev);
+	if (ret)
+		return ret;
 
 	if (info->gptp || info->ccc_gac) {
 		/* Set GTI value */